BIS - LIMS (Laboratory Information Management System)

BIS, Southern Regional Laboratory (SRL)

IV CROSS ROAD, CIT CAMPUS, TARAMANI, CHENNAI-600113, TAMILNADU, CHENNAI, Chennai, Tamil Nadu, 600113

- srol@bis.gov.in

Scope List

Reset

273 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

271

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 7.2 (Weight)	-
Cl 5 (Deformations and Surface Characteristics)	-
Cl 6.1 (Length, Width & Thickness)	-
Cl.9.4 & Cl. 9.4.1 (Rebend test)	-
Cl. 9.3, Table 4 (Bend Test )	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-
Clause 4.2 Note 2, Amendment 1 & 3 (Nb+V+B+Ti)	-
Clause 4.2 Note 3, Amendment 1 & 3 (Cr+Cu+Ni+Mo+P)	-
Clause 4.2, Amendment 3 Note 4 ("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-
4.2 (Boron (B))	-
4.2 (Niobium (Nb))	-
4.1 (Carbon %)	-
4.1 (Manganese %)	-
4.1 (Phosphorus %)	-
4.1 (Silicon %)	-
4.1 (Sulphur %)	-
4.1 ( Copper %)	-
4.1 ( Aluminium %)	-
4.1 ( Nitrogen%)	-
4.1 ( Nb)	-
4.1 (V)	-
4.1 ( Ti)	-
4.1 (Cr)	-
4.1 (Mo)	-
4.1 (Ni)	-
4.1 (CE)	-
4.1 (Sulphur and phosphorous)	-

-
" 1 mtr x3pcS. Chemical facility is available. Excluding EXCEPT Pullout TEST, Bend and Rebend, 0.2 percent proof stress/ yield stress, Total elongation at maximum force, bar size restricted upto 20 mm for TENSILE TEST

272

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

14700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 (Operating Test for Pressure Regulating Device)	-
8.4 (Test for Safety Pressure Relief Device)	-
8.5 (Bursting Pressure Test)	-
8.2 (Proof Pressure Test)	-
8.1 (Air Pressure Test)	-
4.1 (Capacity)	-
4.1 (Capacity )	-
8.2 (Proof Pressure Test)	-
8.5 (Bursting Pressure Test)	-
8.1 (Air Pressure Test)	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
7.1 (WORKMANSHIP AND FINISH)	-
7.2 (WORKMANSHIP AND FINISH)	-
7.3 (WORKMANSHIP AND FINISH)	-
6.4.1.1 (Handles and Knobs)	-
6.4.1 (Handles and Knobs)	-
6.1 (Pressure Regulating Device)	-
6.1.1 (Pressure Regulating Device)	-
6.1.2 (Pressure Regulating Device)	-
6.1.3 (Pressure Regulating Device)	-
6.1.4 (Pressure Regulating Device)	-
6.1.5 (Pressure Regulating Device)	-
6.2 (Safety Relief Device)	-
6.2.1 (Safety Relief Device)	-
6.2.2 (Safety Relief Device)	-

-
" 1 No Excluding Excl Temp. Responsive Pressure Relief Device, Chromium over nickel plating, External Coating, Internal Coating and Chemical tests

273

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC Cables except FR & FRLSH Category

Please see remarks View breakup
Category: 01 Unsheathed cable: a) Single Core, Plain Copper Conductor - Rs.10500 b) Single Core, Tinned Copper Conductor- Rs.10800 c) Single Core, Solid Aluminium Conductor- Rs.10200 d) Single Core, Stranded Aluminium Conductor- Rs.10200 Sheathed Cable: a) Single Core, Plain Copper Conductor- Rs. 17550 b) Single Core, Tinned Copper Conductor - Rs.17850 c) Single Core, Solid Aluminium Conductor- Rs. 17250 d) Single Core, Stranded Aluminium Conductor- Rs.17250 Category: 02 Unsheathed cable: a) Single Core, Plain Copper Conductor- Rs.12150 b) Single Core, Tinned Copper Conductor- Rs.12450 c) Single Core, Solid Aluminium Conductor - Rs.11850 d) Single Core, Stranded Aluminium Conductor - Rs.11850 Sheathed Cable: a) Single Core, Plain Copper Conductor - Rs.18900 b) Single Core, Tinned Copper Conductor - Rs.19200 c) Single Core, Solid Aluminium Conductor - Rs.18600 d) Single Core, Stranded Aluminium Conductor - Rs.18600 Testing facility Complete for Cat 01, 02 except FR & FRLSH. Test facility not available for Chemical tests - Copper Purity test and Persulphate tests.Multi core cable: For each additional core, the charges of single core unsheathed cable as per material (copper and aluminium) and as per construction of conductor (solid or stranded, tinned or plain) shall be added

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13 (Cable code)	-
11.2 (Legibility)	-
11.1 (Durability)	-
11 (Identification)	-
10.9 (Additional ageing test (OU cables only) -HV test (at 60±3oC))	-
10.4 (Flammability test- Unaffected portion)	-
10.4 (Flammability test-Burning after flame removal)	-
table 1 e) 3) (IR constant- max. Temp)	-
table 1 e) 3) (IR constant- Room temp )	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-
table 1 e) 3) (Volume Resistivity - Room temp )	-
10.2 (HV (room temperature))	-
10.1 (HV (water immersion))	-
10.1 (HV (water immersion))	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 (Category Code)	-
Table 1 iii) d) 7) (Thermal stability- Sheath )	-
Table 1 iii) c) 7) (Thermal stability- Insulation )	-
Table 1 iii) d) 6) (Hot deformation -Indentation depth - Sheath )	-
Table 1 iii) c) 6) (Hot deformation - Indentation depth- Insulation)	-
Table 1 iii) d) 5) (Heat shock-Sheath )	-
Table 1 iii) c) 5) (Heat shock-Insulation )	-
Table 1 iii) d) 4) (Cracks Observed)	-
Table 1 iii) d) 4) (Shrinkage- Sheath )	-
Table 1 iii) c) 4) (Cracks Observed)	-
Table 1 iii) c) 4) (Shrinkage-Insulation)	-
Table 1 iii) d) 2) (Loss of mass- Sheath )	-
Table 1 iii) c) 2) (Loss of mass- Insulation )	-
Table 1 iii) d) 3) (Sheath- Elongation variation)	-
Table 1 iii) d) 3) (Sheath- TS variation)	-
Table 1 iii) d) 3) (Sheath- Elongation (After ageing))	-
Table 1 iii) d) 3) (Sheath- Tensile strength (After ageing))	-
Table 1 iii) d) 1) (Sheath- Elongation (Without ageing))	-
Table 1 iii) d) 1) (Sheath -Tensile strength (Without ageing))	-
Table 1 iii) c) 3) (Elongation variation)	-
Table 1 iii) c) 3) (TS variation)	-
Table 1 iii) c) 3) (Elongation (After ageing))	-
Table 1 iii) c) 3) (Tensile strength (After ageing))	-
Table 1 iii) c) 1) (Elongation (Without ageing))	-
Table 1 iii) c) 1) (Tensile strength (Without ageing))	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4) (Colour of Sheath)	-
8.3 (Thickness of Sheath)	-
5.2 (Application )	-
5.3 (Thickness of Insulation)	-
9.1 (Ovality)	-
9 (Overall dimensions)	-
4.2 (Conductor resistance test)	-
4.1 (Wrapping test (for Al))	-
4.1 (Tensile test (for Al)- After Stranding)	-
4.1 (Tensile test (for Al)-Before Stranding)	-
4.1 (Annealing test (for copper))	-
(Cl.16.1) (Cl.19.1) (Conductor- Diameter )	-
(Cl.16.1) (Cl.19.1) (Conductor)	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3) (Assembly of cores )	-
8.1 (Sheath Material )	-
7 (Binder Tape)	-
6.2 (Filler)	-
6.1 (Filler)	-
5.1 (Insulation)	-
4.4 (Joints in Conductor)	-
4.4 (Joints in Conductor)	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
8.3 (Minimum thickness of Sheath)	-
8.3 (Avarage thickness of Sheath)	-
5.3 (Minimum thickness of insulation)	-
5.3 (Avarage thickness of insulation)	-

-
" 30 m Excluding Except FR & FRLSH test, Cu Purity test

Bureau of Indian Standards

The National Standards Body of India

BIS, Southern Regional Laboratory (SRL)

IV CROSS ROAD, CIT CAMPUS, TARAMANI, CHENNAI-600113, TAMILNADU, CHENNAI, Chennai, Tamil Nadu, 600113

- srol@bis.gov.in

Scope List