BIS - LIMS (Laboratory Information Management System)

National Test House (NR) - NTH, Ghaziabad

Kamla Nehru Nagar,Ghaziabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

9999472699 director-gzb@nth.gov.in

Scope List

Reset

79 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

Class-Gen purp./Heavy dut Type-Plain (Cement/Coloured )

7000 View breakup
Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	0	-
Cl 11(Suface Finish)	-	0	-
Cl 12.2(Concavity & Convexity )	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	1000	-
Cl 12.6(Wet transverse strength )	-	2000	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 12.7(Resistance to wear)	-	2500	-
Cl 12.7(Resistance to wear)	-	0	-
Cl 12.7(Resistance to wear)	-	2500	-

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

5000 View breakup
For BIS samples:Rs.7778.50, for others: Rs.9500/- Full Test, [Rs.5500/- Physical test, Rs.4000/- Chemical test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1( Nitrogen%)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1(Nitrogen%)	-	500	-

-
C15, C18, C20, C15MMn, C18MMn, C20 HMn, C15 HMn, C18 HMn, C20 HMn, C25 HMn

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

7000 View breakup
Rs.3000/- for Mechaical, Rs.4000/- for chemical

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(moisture content)	-	1000	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	2000	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	1000	-
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	1000	-
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	1000	-
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	1000	-
5.1, 6.1, Table 1(Total chlorides)	-	1000	-
5.1, 6.1, Table 1(Loss on ignition)	-	1000	-
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1000	-
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	1000	-
7.1, Table 1(Soundnes)	-	1500	-

-
-

IS 13801 (2013)

Chequered Cement Concrete Tiles -

Class-Gen Pur /Heavy Duty/Type-Plain (cement/ colored)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	0	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	0	-
Cl 11(Finish)	-	0	-
Cl 11(Finish)	-	0	-
Cl 11(Finish)	-	0	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.5(Wet transverse strength)	-	2000	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 12.6(Resistance to wear)	-	2500	-

-
-

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

Distribution Transformers 11 KV upto 2500 KVA Rating

105000 View breakup
Rs.48000/- for rating upt 100 kVA, Rs.75000/- for rating 101 kVA to 200kVA, Rs.85000/- for rating 201 kVA to 500 kVA, Rs.95000/- for rating 501 kVA to 1000 kVA, Rs.1,05,000/- for rating 1001 kVA to 2500 kVA

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 e)(Measurement of insulation resistance)	-	500	-
13.1(Marking (Rating Plates))	-	0	-
13.2(Terminal Marking Plate)	-	0	-
13.3(Marking )	-	0	-
13.4(Marking)	-	0.00	-
13.4.1(Marking)	-	0.00	-
14.1(MOUNTING ARRANGEMENT)	-	0	-
14.2(MOUNTING ARRANGEMENT)	-	0	-
14.3(MOUNTING ARRANGEMENT)	-	0	-
14.4(MOUNTING ARRANGEMENT)	-	0	-
15.1.1(TRANSFORMER TANK : Construction)	-	0	-
15.1.2(TRANSFORMER TANK : Construction)	-	0	-
15.1.3(TRANSFORMER TANK : Construction)	-	0	-
15.1.4(TRANSFORMER TANK : Construction)	-	0	-
15.1.5(TRANSFORMER TANK : Construction)	-	0	-
17( ABILITY OF TRANSFORMERS TO WITHSTAND EXTERNAL SHORT CIRCUIT )	-	0	-
21.2 a)(Measurement of winding resistance )	-	1000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	1000	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	5000	-
21.2 d)(Measurement of no-load loss and current)	-	5000	-
21.2 f)(Induced over-voltage withstand test)	-	1000	-
21.2 g)( Separate-source voltage withstand test)	-	1000	-
21.3(a )(Lightning impulse test)	-	35000	-
21.5.3.3(Oil leakage test)	-	2000	-
21.3(b)(Temperature-rise test)	-	25000	-
21.3(c)(Short-circuit withstand test)	-	0	-
21.4 a)( Determination of sound levels)	-	2000	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	6000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	3000	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	0	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	0	-
21.5.2.3( Oil leakage test (routine test))	-	2000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	0	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	0	-
21.5.3.3(Oil leakage test (routine test))	-	2000	-
21.4 b(Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA))	-	0	-
21.4 c(No load current at 112.5 percent voltage.)	-	2500	-
21.4 d(Paint adhesion tests)	-	1000	-
21.4 e(BDV and moisture content of oil in the transformer)	-	4000	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	6000	-
11(Minimum clearance in Air)	-	0	-
16(Conservator for Non-sealed type Transformers)	-	0	-
20(Fittings)	-	0	-
15.5(Total Dry Film Paint Thickness)	-	0	-

-
Excluding: Short Curcuit test as per Cl.21.4(b)

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

PPC (CCB)

11000 View breakup
For BIS samples: BIS approved testing charges. For others: Rs.11000/- [ Rs.7000/-for Mechanical, Rs.4000/- for Chemical]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	0	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	0	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-

-
Lab is recognized revised version of standard IS 1489(Pt-2):2015.

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

0.5-125A,210-460V,SP,DP,TP,FP TPN MCBs

450000 View breakup
Upto 32A-Rs.300000 for single pole, Rs.300000 for double pole, Rs.400000 for three pole, Rs.450000 for four pole Upto 63A-Rs.350000 for single pole, Rs.400000 for double pole, Rs.450000 for three pole, Rs.500000 for four pole Upto 125A-Rs.530000 for single pole, Rs.580000 for double pole, Rs.680000 for three pole, Rs.710000 for four pole.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification, IS 60898-1)	-	500	Rs500/- for all Classification Parameter
4.3(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.4(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.5(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.5.1(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.5.2(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.6(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.7(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
6(Marking and other product information, IS 60898-1)	-	500	-
8.1.1(General, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.3(Clearances and creepage distances, IS 60898-1)	-	500	-
8.1.4.1(Reliability of Screws current carrying parts and connections IS 60898-1)	-	1000	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.4.2(Reliability of Screws current carrying parts and connections IS 60898-1)	-	0	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.4.3(Reliability of Screws current carrying parts and connections IS 60898-1)	-	0	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.4.4(Reliability of Screws current carrying parts and connections IS 60898-1)	-	0	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.5.1(Reliability of terminals for external conductors, IS 60898-1)	-	1000	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.2(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.3(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.4(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.5(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.6(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.7(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.8(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.9(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.10(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.11(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.12(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.2(Protection against Electric Shock, IS 60898-1)	-	1000	-
8.3.2(Dielectric strength at power frequency, IS 60898-1)	-	500	-
8.3.3(Isolating capability, IS 60898-1)	-	1000	-
8.3.4(Dielectric strength at rated impulse withstand voltage ( Uimp), IS 60898-1)	-	5000	-
8.4(Temperature-rise, IS 60898-1)	-	5000	-
8.5(Uninterrupted duty, IS 60898-1)	-	1000	-
8.6(Automatic operation, IS 60898-1)	-	1000	-
8.7(Mechanical and electrical endurance, IS 60898-1)	-	40000	-
8.8(Performance at short-circuit currents, IS 60898-1)	-	45000	-
8.9(Resistance to mechanical shock and impact, IS 60898-1)	-	1000	-
8.1(Resistance to heat, IS 60898-1)	-	1000	-
8.11(Resistance to abnormal heat and to fire, IS 60898-1)	-	1500	-
8.12(Resistance to rusting, IS 60898-1)	-	1000	-
8.13(Power loss, IS 60898-1)	-	500	-
9.3(Test of indelibility of marking, IS 60898-1)	-	500	-
9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-	1000	Rs1000/- for all test of reliability of screws, current-carrying parts and connections, Parameter
9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	0	Rs1000/- for all test of reliability of screws, current-carrying parts and connections, Parameter
9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	0	Rs1000/- for all test of reliability of screws, current-carrying parts and connections, Parameter
9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	1000	Rs1000/- for all test of reliability of screw-type terminals for external copper conductors,, Parameter
9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	0	Rs1000/- for all test of reliability of screw-type terminals for external copper conductors,, Parameter
9.6(Test of protection against electric shock, IS 60898-1)	-	500	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.1(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.2(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.3(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.4(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.1(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.2(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.3(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.4(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	5000	Rs5000/- for all Test of temperature-rise and measurement of power loss, Parameter
9.8.5(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	0	Rs5000/- for all Test of temperature-rise and measurement of power loss, Parameter
9.9(28- day test, IS 60898-1)	-	45000	-
9.10.2(Test of tripping characteristic, IS 60898-1)	-	55000	Rs55000/- for all Test of tripping characteristic,, Parameter
9.10.3(Test of tripping characteristic, IS 60898-1)	-	0	Rs55000/- for all Test of tripping characteristic,, Parameter
9.10.4(Test of tripping characteristic, IS 60898-1)	-	0	Rs55000/- for all Test of tripping characteristic,, Parameter
9.10.5(Test of tripping characteristic, IS 60898-1)	-	0	Rs55000/- for all Test of tripping characteristic,, Parameter
9.11(Verification of mechanical and electrical endurance, IS 60898-1)	-	30000	-
9.12(Short- Circuit tests, IS 60898-1)	-	75000	-
9.13.1(Mechanical Stress, IS 60898-1)	-	1000	-
9.13.2.2(Mechanical Stress, IS 60898-1)	-	0	-
9.13.2.3(Mechanical Stress, IS 60898-1)	-	0	-
9.13.2.4(Mechanical Stress, IS 60898-1)	-	0	-
9.13.2.5(Mechanical Stress, IS 60898-1)	-	0	-
9.14.1(Test of resistance to heat, IS 60898-1)	-	1000	-
9.14.3(Test of resistance to heat, IS 60898-1)	-	0	-
9.15(Resistance to abnormal heat and to fire)	-	1500	-
9.16(Test of resistance to rusting)	-	1000	-

-
REVISED 2015 Version Included w.e.f. 20.08.2019.

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

7000 View breakup
For BIS samples: Rs.3420/-, for others: Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	0	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	1000	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-
Cl.12(Freedom from defects)	-	1000	-
Cl 8.2(Press)	-	1000	-
Cl 14(Length, Width & Thickness)	-	500	-
Cl 13(Weight)	-	0	-
5.1(carbon)	-	500	-
5.1(sulphur)	-	500	-
5.1(phosphorus)	-	500	-
5.1(manganese)	-	500	-
5.1(silicon )	-	500	-
5.1(Titanium)	-	500	-
5.1(nitrogen)	-	500	-
5.1(aluminium)	-	500	-
5.1(copper)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
5.1(phosphorus)	-	500	-
5.1(nitrogen)	-	500	-
5.1(micro alloy)	-	2000	-
5.1(micro alloy)	-	2000	-
5.1(silicon )	-	500	-
5.1(aluminium)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
Cl 10(Galvanising Test)	-	2000	-
Cl 10(Galvanising Test)	-	2000	-
Cl 10(Galvanising Test)	-	2000	-
7.4(Mass of Coating: Triple Spot Test)	-	2000	-
7.4(Mass of Coating: Triple Spot Test)	-	2000	-
7.4(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-

-
Lab is recognized revised version of standard IS 277:2018

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

15000 View breakup
Rs.5000/- for 1 fan, 15000/- for 3 fans

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	10	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	100	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
8.1,b(Marking )	-	10	-
8.1,c(Marking )	-	10	-
8.1,d(Marking )	-	10	-
8.1,e(Marking )	-	10	-
8.1,f(Marking )	-	10	-
8.1,g(Marking )	-	10	-
8.2(Marking )	-	10	-
8.3,a(Marking )	-	10	-
8.3,b(Marking )	-	10	-
8.3,c(Marking )	-	10	-
8.3,d(Marking )	-	10	-
8.3,e(Marking )	-	10	-
8.4(Marking )	-	10	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	10	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	10	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	10	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	10	-
6.2(Rating)	-	200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	400	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	400	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	100	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	800	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	100	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	100	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	100	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	100	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	100	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	100	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	100	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	400	-
10.1(Speed Regulators)	-	100	-
10.2(Speed Regulators)	-	50	-
10.2(Speed Regulators)	-	50	-
10.2(Speed Regulators)	-	200	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	50	-
10.5(Speed Regulators)	-	50	-
10.6(Speed Regulators)	-	50	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	50	-
11.1(Starting)	-	50	-
11.2(Starting)	-	50	-
12(Interchangeability)	-	100	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	5000	-
14.3 & Table 1(Test for Air Performance)	-	100	-
14.4(Measurement of Speed of the Fan )	-	200	-
14.4(Measurement of Speed of the Fan )	-	100	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	500	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	100	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	200	-

-
Lab is recognized revised version of standard IS 374:2019.

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

- View breakup
Rs.5000/- for each fan, 15000/- for 3 fans

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

8500 View breakup
For BIS samples: BIS approved testing charges, for others: Rs.8500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 4283 (1981)

Withdrawal

- View breakup
Rs.10000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

8500 View breakup
For BIS samples: BIS approved testing charges, for others: Rs.8500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.2(Diameter & Ovality)	-	500	-
Cl 6.2(Weight)	-	500	-
Cl 5.1(Workmanship)	-	1000	-
Cl 8(Physical Requirements)	-	1000	-
Cl 9.3(Press)	-	1000	-
Clause -4, 4.1( CARBON)	-	500	-
Clause -4, 4.3(TITANIUM)	-	500	-
Clause -4, 4.2(VANADIUM)	-	500	-
Clause -4, 4.1(Molybdenum)	-	500	-
Clause -4, 4.1(Chromium)	-	500	-
Clause -4, 4.1(Nickel)	-	500	-
Clause -4, 4.1( ALUMINIUM)	-	500	-
Clause -4, 4.1(SILICON)	-	500	-
Clause -4, 4.1(NITROGEN)	-	500	-
Clause -4, 4.1(MANGANESE)	-	500	-
Clause -4, 4.1(PHOSPHURS)	-	500	-
Clause -4, 4.1(SULPHUR)	-	500	-

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1000	-
Cl 4.1(Workmanship)	-	1000	-
Cl 5 & 6(Diameter)	-	1000	-
Cl 7(UTM)	-	2000	-
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-

-
For BIS samples: BIS approved testing charges, for others: Rs.6500/-

IS 778 (1984)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

7000 View breakup
For BIS samples: BIS approved testing charges, For others: Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1- Table 4(Thickness of Body and Bonnet- IS 778)	-	200	-
8.6- Table 9 to Table 12(End to end/ centre to ends/ Face to face/Centre to face dimension )	-	200	-
8.2 - Table 5(Flat to Flat size -IS 778 )	-	200	-
8.3 - Table 6(Width of end - IS 778)	-	200	-
8.4 - Table 7(Stem Diameters - IS 778)	-	200	-
8.5 - Table 8(Size of packing space - IS 778)	-	200	-
8.5 - Table 8(Depth of stuffing box - IS 778)	-	200	-
8.5 - Table 8(Dia of stuffing box - IS 778)	-	200	-
9.3-Table 13(Body Test ( Hydrostatic))	-	1250	-
9.4(Back Seat Test )	-	1250	-
6- Table 1-i)(Brass(Body)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-i)(Leaded tin Bronze(Body)-Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-ii)(Leaded tin Bronze(Bonnet or cover)-Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-ii)(Forged Brass(Bonnet or cover)-Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-ii)(Brass(Bonnet or cover)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Leaded tin bronze(Stuffing box) - Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (disc hinge)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze( check nut)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (stem nut)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (disc retaining nut)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (gland)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (gland nut) - Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze ( gland flange)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze (body seat rings)- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Leaded tin bronze ( disc or wedge facing rings )- Cl 3 and table 1 of IS 318)	-	5000	-
6- Table 1-iii)(Extruded brass rod (Stuffing box) - Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode(disc hinge)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)( Extruded brass rode (check nut)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (stem nut) - Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (disc retaining nut)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (gland )- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (gland nut)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode ( gland flange)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode (body seat rings)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Extruded brass rode( disc or wedge facing rings)- Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iii)(Forged brass (Stuffing box)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass(disc hinge)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass ( check nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (stem nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (disc retaining nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (gland)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (gland nut)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (gland flange)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (body seat rings)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Forged brass (disc or wedge facing rings)- Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iii)(Brass(Stuffing box)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass (disc hinge)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass( check nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(stem nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(disc retaining nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(gland)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(gland nut)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(gland flange)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass(body seat rings)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iii)(Brass( disc or wedge facing rings)-Cl 7 and table 1 of IS 1264)	-	5000	-
6- Table 1-iv)(Extruded brass rod (stem)-Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iv)(High-tensile brass( stem) - Cl 4.1 and table 1 of IS 320)	-	5000	-
6- Table 1-iv)(Forged brass ( stem) -Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iv)(Extruded brass rod (hinge pin)-Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iv)(High-tensile brass ( hinge pin) - Cl 4.1 and table 1 of IS 320)	-	5000	-
6- Table 1-iv)(Forged brass ( hinge pin) -Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-iv)(Extruded brass rod (plug)-Cl 8.1 and table 1 of IS 319)	-	5000	-
6- Table 1-iv)(High-tensile brass( plug) - Cl 4.1 and table 1 of IS 320)	-	5000	-
6- Table 1-iv)(Forged brass ( plug) -Cl 8 , table 3 and FLB of IS 6912)	-	5000	-
6- Table 1-v)(Chromium steel (Ball for ball type check valves) - Cl 5.1 and table 1 of IS 4398)	-	5000	-
6- Table 1-vi)(Mild steel (Bolts, nuts) - IS 1367)	-	5000	-
6- Table 1-vii)(Cast iron (Handwheel ) - Cl 6.1 of IS 210)	-	2000	-
6- Table 1-x)(Phosphor bronze wire (Spring) - As per Cl 6.1, Table 1 of IS 7608)	-	2500	-

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

- View breakup
For BIS samples: BIS approved Testng charges. For Others: Rs.15000 (Inclusive of safety testing charges as per IS 302-2-35 @ Rs.5000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 1328 (1996)

Veneered Decorative Plywood -Specification

BWR/MR/TYPE I/TYPE II

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	0	-
4.1(Grade - For MR)	-	0	-
4.2(Type - For Type 1)	-	0	-
4.2(Type - For Type 2)	-	0	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	250	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	250	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	250	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	250	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	250	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	250	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	250	-
9(Finish - Cl. 9.1, 8.3)	-	0	-
9(Finish - Cl. 9.2, 8.3)	-	0	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1000	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2000	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2000	-

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Reversion)	-	1000	-
8.1(Hydraulic characteristics)	-	5000	-
8.3(Density)	-	1500	-
8.4(Melt Flow Rate)	-	1000	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	-
6(Dimensions of pipes)	-	500	-
10(Marking)	-	500	-
3(Designation)	-	500	-
4(Colour)	-	500	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	500	-

-
-

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	1000	-
8.9(Marking)	-	500	-
6(Rating)	-	500	-
7(Classification)	-	500	-
10(Protection against Electric Shock)	-	500	-
11.1(Provision for earthing)	-	500	-
12(Terminals)	-	500	-
12.2.2(Connection of conductor)	-	500	-
12.2.3(Mechanical strength of terminals)	-	500	-

-
-

Bureau of Indian Standards

The National Standards Body of India

National Test House (NR) - NTH, Ghaziabad

Kamla Nehru Nagar,Ghaziabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

9999472699 director-gzb@nth.gov.in

Scope List

No Record Found

No Record Found

No Record Found

No Record Found