BIS - LIMS (Laboratory Information Management System)

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

9582647433 ntldelhi@yahoo.co.in

Scope List

Reset

104 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

All Grade

4700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-1(Cu)	-	300	(10% Discount for BIS)
6.1 Table-1(Pb)	-	300	(10% Discount for BIS)
6.1 Table-1(Fe)	-	300	(10% Discount for BIS)
6.1 Table-1(Zn)	-	300	(10% Discount for BIS)
7.1.1(Tensile Test)	-	600	(10% Discount for BIS)
Table-2(Elongation)	-	600	(10% Discount for BIS)
Table-2(Transverse Bend)	-	300	(10% Discount for BIS)
Table-2(Longitudinal Bend)	-	300	(10% Discount for BIS)

Complete

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

All Grade

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	(10% Discount for BIS)
5.4.2(a)( Aggregates Impact Value)	-	500	(10% Discount for BIS)
5.4.3(a)( Aggregate Abrasion Value)	-	1000	(10% Discount for BIS)
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	(10% Discount for BIS)
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1500	(10% Discount for BIS)
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	(10% Discount for BIS)
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	500	(10% Discount for BIS)
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	500	(10% Discount for BIS)
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	500	(10% Discount for BIS)
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	500	(10% Discount for BIS)
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	500	(10% Discount for BIS)
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	(10% Discount for BIS)
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	(10% Discount for BIS)
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	(10% Discount for BIS)
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	(10% Discount for BIS)
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	100	(10% Discount for BIS)
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	100	(10% Discount for BIS)
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	100	(10% Discount for BIS)
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	100	(10% Discount for BIS)
5.5(Soundness By Magnesium Sulphate)	-	1500	(10% Discount for BIS)
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	200	(10% Discount for BIS)
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	200	(10% Discount for BIS)
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	200	(10% Discount for BIS)
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	200	(10% Discount for BIS)
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	200	(10% Discount for BIS)
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	200	(10% Discount for BIS)

Complete

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

All Grade

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 1(Zn)	-	1000	(10% Discount for BIS)
8.1 Table 1(Cu)	-	1500	(10% Discount for BIS)
8.1 Table 1(Fe)	-	500	(10% Discount for BIS)
10.1(Mercurous Nitrate Test)	-	1500	(10% Discount for BIS)
7.0(Dimension and Tolerances)	-	500	(10% Discount for BIS)
9.1 Table-2(Tensile Strength)	-	500	(10% Discount for BIS)
9.1 Table-2(Elongation)	-	500	(10% Discount for BIS)
9.2(Vickers Hardness)	-	1000	(10% Discount for BIS)

Complete

IS 303 (1989)

Plywood for General Purposes -

All Grade

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	200	(10% Discount for BIS)
8(Dimensions & Tolerances - Width - Cl. 8)	-	200	(10% Discount for BIS)
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	200	(10% Discount for BIS)
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	300	(10% Discount for BIS)
8(Dimensions & Tolerances - Squareness - Annexure C)	-	300	(10% Discount for BIS)
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	(10% Discount for BIS)
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	(10% Discount for BIS)
11.3(Moisture Content - Part 1 of IS 1734)	-	500	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	200	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	200	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	200	(10% Discount for BIS)
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	200	(10% Discount for BIS)
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	200	(10% Discount for BIS)

Complete

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

All Grade

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 & 8(Diameter)	-	200	(10% Discount for BIS)
Cl 9(Tensile Test On UTM)	-	750	(10% Discount for BIS)
9.2(Wrapping Test)	-	750	(10% Discount for BIS)
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1000	(10% Discount for BIS)
Cl 13(Workmanship)	-	500	(10% Discount for BIS)
7 & 8(Ovality)	-	500	(10% Discount for BIS)

Complete

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

All Grade

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Tensile Strength)	-	1500	(10% Discount for BIS)
12.1(Breaking load)	-	500	(10% Discount for BIS)
12.3(Ductility)	-	500	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	(10% Discount for BIS)
12.2(Uniformity of zinc coating)	-	1000	(10% Discount for BIS)
8(CHROMATING)	-	500	(10% Discount for BIS)
5 Table-1(Sizes Mass of Completed barbed wire)	-	500	(10% Discount for BIS)

Complete

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

All Grade

4980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(carbon)	-	500	(10% Discount for BIS)
5.1(sulphur)	-	500	(10% Discount for BIS)
5.1(phosphorus)	-	500	(10% Discount for BIS)
5.1(manganese)	-	500	(10% Discount for BIS)
5.1(silicon )	-	500	(10% Discount for BIS)
5.1(aluminium)	-	500	(10% Discount for BIS)
5.1(copper)	-	500	(10% Discount for BIS)
5.1(nitrogen)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	500	(10% Discount for BIS)
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	500	(10% Discount for BIS)
Cl 14(Length, Width & Thickness)	-	500	(10% Discount for BIS)
Cl 13(Weight)	-	500	(10% Discount for BIS)
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	(10% Discount for BIS)
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	(10% Discount for BIS)
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	(10% Discount for BIS)
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	(10% Discount for BIS)
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	(10% Discount for BIS)

Complete

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All Grade

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1000	(10% Discount for BIS)
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	(10% Discount for BIS)
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	(10% Discount for BIS)
7.1(WORKMANSHIP AND FINISH)	-	500	(10% Discount for BIS)
10.1(FREEDOM FROM DEFECTS)	-	500	(10% Discount for BIS)
10.2(FREEDOM FROM DEFECTS)	-	1000	(10% Discount for BIS)
13(SIZE OF TEST BARS-Diameter)	-	500	(10% Discount for BIS)
13(SIZE OF TEST BARS-Length)	-	500	(10% Discount for BIS)
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	500	(10% Discount for BIS)
16, Table 3(Hardness Test)	-	500	(10% Discount for BIS)
17,Annex B(TRANSVERSE TEST)	-	500	(10% Discount for BIS)

Complete

IS 208 (1996)

Door Handles - Specification ( Sixth Revision )

All Grade

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Nickel - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Tin - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Iron - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Aluminium - IS 3685:1966)	-	200	(10% Discount for BIS)
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Zinc - IS 3685:1966)	-	200	(10% Discount for BIS)
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	1000	(10% Discount for BIS)
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	200	(10% Discount for BIS)

Complete

100

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

All Grade

5000 View breakup
Rs.3150/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Aluminium- IS 2600:1964)	-	1000	(10% Discount for BIS)
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Copper- IS 2600:1964)	-	1000	(10% Discount for BIS)
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	1000	(10% Discount for BIS)
6.2- Table 2(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	500	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Silicon - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Magnesium - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Iron - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Manganese - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Nickel - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- iii (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Lead - IS 3635:1966)	-	100	(10% Discount for BIS)
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Tin - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1 , Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Titanium and or other grain refining elements - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983)(Chemical composition - Aluminium - IS 504)	-	100	(10% Discount for BIS)
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974)(Chemical composition - Iron - IS 3685:1966)	-	100	(10% Discount for BIS)
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Zinc - IS 3635:1966)	-	100	(10% Discount for BIS)
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-	100	(10% Discount for BIS)
6.1- Table 1(Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6)	-	100	(10% Discount for BIS)
6.2- Table 2(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-	100	(10% Discount for BIS)
6.2- Table 2(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4)	-	200	(10% Discount for BIS)

Complete

101

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

All Grade

4800 View breakup
Rs.3150/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	200	(10% Discount for BIS)
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	200	(10% Discount for BIS)
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	200	(10% Discount for BIS)
6.1- Table 1(Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-	200	(10% Discount for BIS)
6.2- Table 2(Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-	200	(10% Discount for BIS)
6.2- Table 2(Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	200	(10% Discount for BIS)
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-	200	(10% Discount for BIS)
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	200	(10% Discount for BIS)
6.4- Table 4(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-	200	(10% Discount for BIS)
6.4- Table 4(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	200	(10% Discount for BIS)
6.4- Table 4(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-	200	(10% Discount for BIS)

Complete

102

IS 191 (2007)

Copper - Specification (Fourth Revision)

All Grade

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	1500	(10% Discount for BIS)
7.1 - Table 4(Phosphorus- IS 440)	-	500	(10% Discount for BIS)
5.1- Table 2(L)	-	200	(10% Discount for BIS)
5.1- Table 2(L1)	-	200	(10% Discount for BIS)
5.1- Table 2(h)	-	200	(10% Discount for BIS)
5.1- Table 2(h1)	-	200	(10% Discount for BIS)
5.1- Table 2(b)	-	200	(10% Discount for BIS)
5.1- Table 2(b1)	-	200	(10% Discount for BIS)
5.1- Table 2(R)	-	200	(10% Discount for BIS)
5.1- Table 2(R1)	-	200	(10% Discount for BIS)
5.1- Table 2(R2 )	-	200	(10% Discount for BIS)
5.1- Table 2(α )	-	200	(10% Discount for BIS)
5.1- Table 2( β )	-	200	(10% Discount for BIS)
5.1- Table 2(γ)	-	200	(10% Discount for BIS)
5.4-Table 3 (For Billets)(Mass)	-	200	(10% Discount for BIS)
5.2-Table 3 (For Billets)(Diameter)	-	200	(10% Discount for BIS)
5.2-Table 3 (For Billets)(Length)	-	200	(10% Discount for BIS)
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	200	(10% Discount for BIS)
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	200	(10% Discount for BIS)
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	200	(10% Discount for BIS)
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	200	(10% Discount for BIS)
7.1 - Table 4(Silver- IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Arsenic- IS440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Antimony-IS440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Bismuth-IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Nickel IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Lead IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Tin - IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Iron IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Znic-IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Oxygen IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Selenium - IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Tellurium- IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Sulphur- IS 440)	-	200	(10% Discount for BIS)
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	500	(10% Discount for BIS)
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	200	-
7.1 - Table 4(Total Impurities- IS 440)	-	200	-

Complete

103

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

upto 300 mm all classes

13039 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.5(Tensile Strength IS 12235(Part 13))	-	750	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	150	(10% Discount for BIS)
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	150	(10% Discount for BIS)
9.1(Visual Appearance)	-	200	(10% Discount for BIS)
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	500	(10% Discount for BIS)
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	(10% Discount for BIS)
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	5000	(10% Discount for BIS)
4.1.2(K-Value as per IS-4669)	-	3500	(10% Discount for BIS)

Complete

104

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

All Grade

12500 View breakup
Rs.10000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	500	(10% Discount for BIS)
7 Table-3 ii b(Expansion by Autoclave)	-	750	(10% Discount for BIS)
7 Table-3 iii a(Setting Time Initial)	-	500	(10% Discount for BIS)
7 Table-3 iii b(Setting Time Final)	-	500	(10% Discount for BIS)
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	350	(10% Discount for BIS)
6.1 Table-2 vi(Loss on ignition)	-	300	(10% Discount for BIS)

Complete

Bureau of Indian Standards

The National Standards Body of India

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

9582647433 ntldelhi@yahoo.co.in

Scope List