BIS - LIMS (Laboratory Information Management System)

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

9582647433 ntldelhi@yahoo.co.in

Scope List

Reset

104 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Plain Ended Pipe Only

6550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	600	(10% Discount for BIS)
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2100	(10% Discount for BIS)
Cl 10.1.1(Manufacturing )	-	200	(10% Discount for BIS)
Cl 15(Workmanship)	-	200	(10% Discount for BIS)

Complete

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

All Grade

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	150	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	150	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	250	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	250	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	500	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	1500	(10% Discount for BIS)

Complete

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

All Grade

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	(10 % Discount for BIS)
9.1(PIPE ENDS)	-	400	(10 % Discount for BIS)
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	200	(10 % Discount for BIS)
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	200	(10 % Discount for BIS)
10.3(Effect on Water)	-	500	(10 % Discount for BIS)
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	6000	(10 % Discount for BIS)
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	(10 % Discount for BIS)
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	(10 % Discount for BIS)
Clause 10.7(Sulphated Ash Content)	-	1200	(10 % Discount for BIS)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	4000	(10 % Discount for BIS)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	4000	(10 % Discount for BIS)
11.2(Resistance to External Blows at 0°C)	-	1500	(10 % Discount for BIS)

Complete

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

All Grade

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 (Table 1)(b) 6 mm and above)	-	1000		(10 % Discount for BIS)

Complete

IS 1030 (1998)

Carbon steel castings for general engineering purposes - Specification (Fifth Revision)

All Grade

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CI.13.2, Table-2(Tensile Test)	-	400	(10 % Discount for BIS)
CI.13.2, Table-2(Yield Stress)	-	400	(10 % Discount for BIS)
CI.13.2, Table-2(Elongation)	-	400	(10 % Discount for BIS)
CI.13.4, Table-2(Bend Test)	-	800	(10 % Discount for BIS)
CI.13.3(Impact Test)	-	1500	(10 % Discount for BIS)
CI.13.3(Hydraulic Test)	-	1000	(10 % Discount for BIS)

Complete

IS 952 (2012)

Fog nozzle for fire brigade use - Specification (Second Revision)

All Grade

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Shape and Dimension)	-	400	(10 & Discount for BIS)
5.0(Performance Requirements)	-	1000	(10 & Discount for BIS)
5.2.2(Hydraulic Pressure Test)	-	1000	(10 & Discount for BIS)
6.0(Workmanship and Finish)	-	300	(10 & Discount for BIS)

Complete

IS 902 (1992)

Suction hose couplings for fire fighting purposes - Specification (Third Revision)

All Grade

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Shape and Dimension)	-	1000	(10 & Discount for BIS)
5.0(Construction)	-	300	(10 & Discount for BIS)
5.2(Round Threads for Male Coupling and Nut)	-	300	(10 & Discount for BIS)
5.3(V Thread for Locking Ring and Nut)	-	300	(10 & Discount for BIS)
7.0(Workmanship and Finish)	-	500	(10 & Discount for BIS)
8.0(Performance Requirements)	-	2000	(10 & Discount for BIS)

Complete

IS 926 (1985)

Specification For Fireman's Axe

All Grade

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Carbon)	-	300	(10 & Discount for BIS)
8.3(Manganese)	-	300	(10 & Discount for BIS)
3(Sulphur)	-	300	(10 & Discount for BIS)
2.1(General)	-	200	(10 & Discount for BIS)
4.1(Shape, Dimension & Construction)	-	200	(10 & Discount for BIS)
4.2(Shape, Dimension & Construction)	-	200	(10 & Discount for BIS)
4.3(Shape, Dimension & Construction)	-	200	(10 & Discount for BIS)
5.1(Workmanship and Finish)	-	300	(10 & Discount for BIS)
6.2(Performance Test (Load))	-	1000	(10 & Discount for BIS)
6.3(Insulated Handle)	-	1000	(10 & Discount for BIS)

Complete

IS 11884 (1986)

Specification for fire - Resistant brattice sheeting made from unsupported plastics

All Grade

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Thickness)	-	1000	(10 & Discount for BIS)
3.3(Width)	-	1500	(10 & Discount for BIS)
3.5.1(Breaking Load and elongation at Break)	-	2000	(10 & Discount for BIS)
3.5.2(Tear strength)	-	1000	(10 & Discount for BIS)
3.5.3(Fire Resistance)	-	2000	(10 & Discount for BIS)
3.5.4(Electrical Resistance Test)	-	3000	(10 & Discount for BIS)

Complete

IS 2185 : Part 2 (1983)

Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Width)	-	350	(10% discount for BIS)
3.2(Height)	-	350	(10% discount for BIS)
3.2(Length)	-	350	(10% discount for BIS)
8.3(Block Density)	-	1500	(10% discount for BIS)
8.4, Table 1(Compressive strength)	-	7000	(10% discount for BIS)
8.5, Table 1(Water Absorption)	-	1500	(10% discount for BIS)
8.6(Drying shrinkage)	-	3000	(10% discount for BIS)
8.7(Moisture Movement)	-	3000	(10% discount for BIS)

Complete

IS 208 (2020)

Door Handles - Specification ( Sixth Revision )

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(MANUFACTURE- General)	-	300		(10% Discount for BIS)

Complete

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, Table 1.(CHEMlCAL COMPOSITION)	-	5000	(10% Discount for BIS)
4, Table 2.(MECHANICAL PROPERTIES)	-	1500	(10% Discount for BIS)
6(FREEDOM FROM DEFECTS)	-	500	(10% Discount for BIS)
7(SIZE AND SHAPE)	-	500	(10% Discount for BIS)

Complete

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

All Grade

1900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.4 (a)(Acidity)	-	200	(10% Discount for BIS)
Cl 5.4 (b)(Alkalinity)	-	200	(10% Discount for BIS)
Cl 5.4 .2(pH)	-	250	(10% Discount for BIS)
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	250	(10% Discount for BIS)
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	250	(10% Discount for BIS)
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	250	(10% Discount for BIS)
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	250	(10% Discount for BIS)
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	250	(10% Discount for BIS)
16.1(Average Compressive Strength)	-	1100	(10% Discount for BIS)

Complete

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

All Grade

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3(Tensile Test-1608:Part 1)	-	500	-
6(Freedom From Defects)	-	250	-
9.3, Table 3 (Yield Strength, Mpa)	-	500	-
9.3, Table 3 (Tensile Strength, Mpa)	-	500	-
9.3, Table 3 (Elongation, %)	-	500	-

Complete

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

All Grade

5750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1, 5.1, 8.1 & 8.2(Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
5 and 10.3.1(Tensile strength. IS 1608)	-	400	(10% Discount for BIS)
5 and 10.3.1(Yield Stress. IS 1608)	-	400	(10% Discount for BIS)
5 and 10.3.1(Percentage Elongation. . IS 1608)	-	400	(10% Discount for BIS)
11.3( Bend Test. IS 1599)	-	750	(10% Discount for BIS)

Complete

IS 15834 (2008)

Stainless Steel Sliding Door Bolts For Use With Padlocks -specification

All Grade

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	200	(10% Discount for BIS)
Clause 4.2(Sulphur)	-	200	(10% Discount for BIS)
Clause 4.2(nickel)	-	200	(10% Discount for BIS)

Complete

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

All Grade

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	200	(10% Discount for BIS)
Clause 4.2(Sulphur)	-	200	(10% Discount for BIS)
Clause 4.2(Phosphorus)	-	200	(10% Discount for BIS)
Clause 4.2(Manganese)	-	200	(10% Discount for BIS)
Clause 4.2(Silicon)	-	200	(10% Discount for BIS)
Clause 4.2(Chromium)	-	200	(10% Discount for BIS)
Clause 4.2(nickel)	-	200	(10% Discount for BIS)
Cl 6(DIMENSIONS)	-	1000	(10% Discount for BIS)
Cl 7(0)	-	200	(10% Discount for BIS)
Cl 3(NOMINAL SIZES)	-	500	(10% Discount for BIS)

Complete

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

All Grade

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Dimensions Of Pipes)	-	500	(10% Discount for BIS)
Cl 8(Visual Appearance)	-	500	(10% Discount for BIS)
Cl 9.2(Fusion Compatibility)	-	1500	(10% Discount for BIS)
Cl 9.3(Reversion Test )	-	1000	(10% Discount for BIS)
Cl 9.4 & Annex B(Impact Strength)	-	2500	(10% Discount for BIS)
Cl 9.5(Density)	-	750	(10% Discount for BIS)
Cl 9.6(Melt Flow Rate)	-	1000	(10% Discount for BIS)
Cl 9.7(Carbon Black Content & Dispersion)	-	2000	(10% Discount for BIS)
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	30000	(10% Discount for BIS)
Cl 9.9(Opacity)	-	750	(10% Discount for BIS)

Complete

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

Except for classD fire and Except fire performance test

21050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	400	(10% Discount for BIS)
Cl. 5.3.2(Filling Requirements)	-	200	(10% Discount for BIS)
Cl. 5.3.3(Capacities)	-	300	(10% Discount for BIS)
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	300	(10% Discount for BIS)
Cl. 7.3(Resistance to Temperature changes)	-	300	(10% Discount for BIS)
Cl 7.4.3( Leakage Test)	-	300	(10% Discount for BIS)
Cl 7.5.1(Impact Resistance Test)	-	300	(10% Discount for BIS)
Cl 7.5.2(Vibration Resistance Test)	-	300	(10% Discount for BIS)
Cl 7.7(Tapping Test)	-	300	(10% Discount for BIS)
Cl 7.8(Intermittent Discharge Test)	-	300	(10% Discount for BIS)
Cl 9.2.2(Burst Test)	-	300	(10% Discount for BIS)
Cl 9.2.3(Crushing Test)	-	300	(10% Discount for BIS)
Cl 9.2.4(Pressure Cycling Test)	-	300	(10% Discount for BIS)
Cl 9.3(Carrying Handle)	-	300	(10% Discount for BIS)
Cl 9.8(Hose Assemblies)	-	300	(10% Discount for BIS)
Cl 9.9 - Table 10(Method of Operation)	-	300	(10% Discount for BIS)
Cl 9.10(Safety-Locking Devices)	-	300	(10% Discount for BIS)
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	300	(10% Discount for BIS)

Complete

IS 15658 (2006)

Precast concrete blocks for paving - Specification

All Grade

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	9500	(10% Discount for BIS)
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	(10% Discount for BIS)
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	200	(10% Discount for BIS)
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	200	(10% Discount for BIS)
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	200	(10% Discount for BIS)
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	200	(10% Discount for BIS)
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	300	(10% Discount for BIS)
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	300	(10% Discount for BIS)
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	300	(10% Discount for BIS)
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	300	(10% Discount for BIS)
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	300	(10% Discount for BIS)
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	300	(10% Discount for BIS)
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	300	(10% Discount for BIS)
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	300	(10% Discount for BIS)
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	300	(10% Discount for BIS)
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	300	(10% Discount for BIS)
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	300	(10% Discount for BIS)
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	300	(10% Discount for BIS)
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	300	(10% Discount for BIS)
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	300	(10% Discount for BIS)
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	500	(10% Discount for BIS)
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	500	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	500	-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	500	-
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	500	-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	500	-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	500	-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	500	-

Complete

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

All Grade

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8(UTM)	-	500		-

Complete

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

All Grade

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	300	(10% Discount for BIS)
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	100	(10% Discount for BIS)
6.1.3 (Length of Pipe)	-	100	(10% Discount for BIS)
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	750	(10% Discount for BIS)
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	750	(10% Discount for BIS)
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	750	(10% Discount for BIS)
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	750	(10% Discount for BIS)
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	750	(10% Discount for BIS)
10(Performance requirements)	-	4000	(10% Discount for BIS)
7.2(Colour )	-	200	(10% Discount for BIS)
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	300	(10% Discount for BIS)
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	500	(10% Discount for BIS)
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	300	(10% Discount for BIS)
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	300	(10% Discount for BIS)
'7.5 (amdt.7)(Effect on Water (Type test))	-	8000	(10% Discount for BIS)

Complete

IS 15058 (2002)

PVC water - Stops at transverse contraction joints for use in masonry and concrete dams - Specification

All Grade

6350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	(10% Discount for BIS)
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	(10% Discount for BIS)
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	600	(10% Discount for BIS)
3.2 Table 1, iv) Annex A(Water absorption)	-	500	(10% Discount for BIS)
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	600	(10% Discount for BIS)
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	1000	(10% Discount for BIS)
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	1900	(10% Discount for BIS)

Complete

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

All Grade

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour of fittings)	-	200	(10% Discount for BIS)
11(Design requirements)	-	300	(10% Discount for BIS)
12.1(Visual appearance)	-	1000	(10% Discount for BIS)
16(Mechanical Properties)	-	2500	(10% Discount for BIS)
8(Sealing Rings)	-	750	(10% Discount for BIS)
10(Workmanship)	-	250	(10% Discount for BIS)
12.2(Stress relief test)	-	1000	(10% Discount for BIS)
12.3(Vicat softening tempewrature)	-	1000	(10% Discount for BIS)
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1000	(10% Discount for BIS)
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	(10% Discount for BIS)
Cl.15, Annex B(Sulphated Ash Content)	-	500	(10% Discount for BIS)
16.1(Impact test)	-	2500	(10% Discount for BIS)
17(Watet tightness of joint)	-	1000	(10% Discount for BIS)

Complete

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

All Grade

6600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
12(Sulphur Print Tests )	-	200	(10% Discount for BIS)
6(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Copper- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Vanadium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Titanium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Niobium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
12(Macro-examination )	-	2000	(10% Discount for BIS)
9 & 10(Dimensions and Tolerances )	-	500	(10% Discount for BIS)
11(Freedom from Defects )	-	500	(10% Discount for BIS)

Complete

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

All Grade

8850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	200	(10% Discount for BIS)
8.3(Density)	-	500	(10% Discount for BIS)
8.4(Melt Flow Rate)	-	750	(10% Discount for BIS)
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	(10% Discount for BIS)
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1500	(10% Discount for BIS)
6(Dimensions of pipes)	-	1400	(10% Discount for BIS)
7(Visual Appearance)	-	200	-

Complete

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Except Optional Test

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	600	10% Discount for BIS
4.1(Phase/Street Lighting conductor)	-	200	(10% Discount for BIS)
4.2(Messenger (Neutral Conductor or Otherwise))	-	200	(10% Discount for BIS)
5.1(Insulation)	-	200	(10% Discount for BIS)
6.1(Flexibility class)	-	150	(10% Discount for BIS)
6.3(Protective barrier)	-	200	(10% Discount for BIS)
6.4(size of street lighting conductor)	-	200	(10% Discount for BIS)
6.5(Size of messenger conductor )	-	200	(10% Discount for BIS)
6.6(Direction of outer layer)	-	200	(10% Discount for BIS)
7.1(Insulation)	-	200	(10% Discount for BIS)
7.2( Thickness of insulation)	-	200	(10% Discount for BIS)
7.3(Tolerance on thickness of insulation )	-	200	(10% Discount for BIS)
7.4(Aplication of the insulation )	-	200	(10% Discount for BIS)
7.5(Colour of the insulation )	-	200	(10% Discount for BIS)
8.1(Core identification)	-	200	(10% Discount for BIS)
8.3(Identification by other means)	-	200	(10% Discount for BIS)
9.1(Assembly (Laying up))	-	200	(10% Discount for BIS)
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	150	(10% Discount for BIS)
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	200	(10% Discount for BIS)
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	200	(10% Discount for BIS)
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	200	(10% Discount for BIS)
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	200	(10% Discount for BIS)
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	200	(10% Discount for BIS)
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	200	(10% Discount for BIS)
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	200	(10% Discount for BIS)
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	200	(10% Discount for BIS)
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	200	(10% Discount for BIS)
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	200	(10% Discount for BIS)
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	200	(10% Discount for BIS)
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	200	(10% Discount for BIS)
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	200	(10% Discount for BIS)
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	200	(10% Discount for BIS)
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	200	(10% Discount for BIS)
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	200	(10% Discount for BIS)
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	200	(10% Discount for BIS)
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	200	(10% Discount for BIS)
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	200	(10% Discount for BIS)
10.1 g)(High voltage test - IS10810:Part 45)	-	200	(10% Discount for BIS)
11.4(Bending Test on the Completed Cable ( Optional) )	-	200	(10% Discount for BIS)

Complete

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

All Grade

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	(10% Discount for BIS)
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1500	(10% Discount for BIS)
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500	(10% Discount for BIS)
7.2.1 (Visual and Workmanship Requirement)	-	200	(10% Discount for BIS)
4.1 (a)( Quick Coupled Male and Female Couplers)	-	150	(10% Discount for BIS)
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	150	(10% Discount for BIS)
Cl.6.1.3(Weldability Test- a) Quality test)	-	150	(10% Discount for BIS)
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	200	(10% Discount for BIS)
6.1.1, 6.1.1.1(Leakage Test)	-	100	(10% Discount for BIS)
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	150	(10% Discount for BIS)

Complete

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

All Grade

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.6(Melt now Rate (MFR))	-	600	(10% Discount for BIS)
(Cl.7.5)(Density)	-	400	(10% Discount for BIS)
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	600	(10% Discount for BIS)
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	600	(10% Discount for BIS)
Cl.5(Dimensions of pipe - i) Outside diameter)	-	400	(10% Discount for BIS)
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	400	(10% Discount for BIS)
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	7500	(10% Discount for BIS)
Cl.7.2)(Reversion Test)	-	1500	(10% Discount for BIS)
Cl.7.3(Tensile Test- i) Tensile Strength)	-	1500	(10% Discount for BIS)
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	600	(10% Discount for BIS)
6.1(VISUAL APPEARANCE)	-	200	(10% Discount for BIS)
(Cl.4.2)(Carbon black- a)carbon content)	-	200	(10% Discount for BIS)

Complete

IS 13801 (2013)

Chequered Cement Concrete Tiles -

All Grade

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	(10% Discount for BIS)
Cl 12.4(Water absorption)	-	500	(10% Discount for BIS)
Cl 12.5(Wet transverse strength)	-	1000	(10% Discount for BIS)
Cl 12.6(Resistance to wear)	-	1000	(10% Discount for BIS)

Complete

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

9582647433 ntldelhi@yahoo.co.in

Scope List