1 |
IS 14885 (2022) |
Polyethylene Pipes for the Supply of Gaseous Fuels � Specification (First Revision) |
-
|
384200.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.2(Grade of material) |
- |
250.00 |
|
For BIS 384200/-GST Extra PE Pipes for Gaseous Fuels, for Other 509975/- GST Charges extra , PE Pipes for Gaseous Fuels Clause no.5.5 cost of chemical will be extra or supply by the party |
4.3(Nominal Diameter) |
- |
250.00 |
|
GST Charges extra |
4.4(Colour) |
- |
300.00 |
|
PE Pipes for Gaseous Fuels |
5.1(Polyethylene compound) |
- |
6625.00 |
|
Density ,MFI ,OIT, volatile content ,water content+ GST charges extra |
5.6(Resistance to Weathering) |
- |
48600.00 |
|
Effect on sun light (Natural weathering) a period of two years, elongation at break ,Hydraulic characteristic at 1000HRS ,thermal stability test +GST charges extra |
5.7(PE Compound Quality Evaluation) |
- |
400000.00 |
|
GST charge's extra |
6.1(Out of Roundness (Ovality)) |
- |
250.00 |
|
GST charge's extra |
6.1(Outside Diameter) |
- |
250.00 |
|
GST charge's extra |
6.2(Wall Thickness) |
- |
250.00 |
|
GST charge's extra |
7(Finish) |
- |
300.00 |
|
GST charge's extra |
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h) |
- |
5050.00 |
|
acceptance test 165 Hrs @80 0C |
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h) |
- |
4000.00 |
|
type test100Hrs @20 0C |
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h) |
- |
11250.00 |
|
type test1000Hrs @80 0C |
8.2(Reversion Test) |
- |
700.00 |
|
GST charges extra |
8.3(Density) |
- |
700.00 |
|
GST charges extra |
8.4(Melt Flow Rate (MFR)) |
- |
1100.00 |
|
GST charges extra |
8.6(Thermal Stability (Oxidation Induction Time)) |
- |
2200.00 |
|
GST charges extra |
8.7(Volatile Matter Content) |
- |
700.00 |
|
GST charges extra |
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break)) |
- |
1550.00 |
|
GST charges extra |
8.9(Resistance to Weathering) |
- |
0.00 |
|
Already added test charges clause no.5.6 |
8.5(Pigment Dispersion) |
- |
700.00 |
|
GST charges extra |
8.10(Slow Crack Growth Rate Test) |
- |
10800.00 |
|
165 HRs @80 0C,500 hrs @80 0C |
8.11(Squeeze-of) |
- |
6350.00 |
|
Hydraulic characteristic 165hrs @ 80 0C |
10(Marking) |
- |
300.00 |
|
GST charges Extra |
8.4(Melt Flow Rate) |
- |
1100.00 |
|
GST charges Extra |
8.3(Density) |
- |
700.00 |
|
GST charges Extra |
8.2(Reversion test) |
- |
700.00 |
|
GST charges Extra |
8.1(Hydraulic Characteristics) |
- |
5050.00 |
|
GST charges Extra |
5.6(iii) Thermal stability (Oxidation induction time)) |
- |
2200.00 |
|
GST charges Extra |
5.6(ii) Hydraulic characteristics) |
- |
11250.00 |
|
1000 Hrs @ 80 0C |
5.5(Effects of Gas Condensate on the Hydrostatic Strength) |
- |
6250.00 |
|
GST charges Extra |
5.4(U.V. Stabilizer) |
- |
2200.00 |
|
GST charges Extra |
5.3(Anti-Oxidant) |
- |
2000.00 |
|
GST charges Extra |
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate) |
- |
10850.00 |
|
GST charges Extra |
5.1, 5.7 Table 2(vi) Pigment dispersion) |
- |
700.00 |
|
GST charges Extra |
5.1, 5.7 Table 2(v) Water content1)) |
- |
700.00 |
|
GST charges Extra |
5.1, 5.7 Table 2(iv) Volatile content) |
- |
700.00 |
|
GST charges Extra |
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time)) |
- |
2200.00 |
|
GST charges Extra |
5.1, 5.7 Table 2(ii) Melt flow rate (MFR)) |
- |
1100.00 |
|
GST charges Extra |
5.1, 5.7 Table 2(i) Conventional density (of base polymer)) |
- |
700.00 |
|
GST charges Extra |
8.11(Squeeze-off) |
- |
6350.00 |
|
GST charges Extra |
8.10(Slow Crack Growth Rate Test) |
- |
10850.00 |
|
GST charges Extra |
8.5(Pigment Dispersion) |
- |
700.00 |
|
GST charges Extra |
6.4(Length of Pipe) |
- |
2500.00 |
|
GST charges Extra |
8.9(Resistance to Weathering) |
- |
0.00 |
|
GST charges Extra |
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break)) |
- |
1550.00 |
|
GST charges Extra |
8.6(Thermal Stability (Oxidation Induction Time)) |
- |
2200.00 |
|
GST charges Extra |
5.3(Anti-oxidant) |
- |
2000.00 |
|
GST charges Extra |
5.5(Effect of Gas condensate on the Hydrostatic strength) |
- |
6250.00 |
|
GST charges Extra |
5.4(U-V stabilizer) |
- |
2200.00 |
|
GST charges Extra |
8.7(Volatile Matter Content) |
- |
700.00 |
|
GST charges Extra |
6(Dimensions of pipes) |
- |
250.00 |
|
GST charges Extra |
7(Finish) |
- |
300.00 |
|
GST charges Extra |
|
Complete
|
|
- |
- |
2 |
IS 15450 (2022) |
Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies Specifications first revision of IS 15450 |
-
|
61375.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5(MATERIALS) |
- |
5625.00 |
|
FOR OTHER : 81375.00 + GST PE-AL-PE COMPOSITE PRESSURE PIPES FOR BIS :Rs 61375.00 +GST AND Raw material Rs .5625.00 , aluminum METAL Rs.1600.00 clause no .11.7 Resistance to weathering a period of two years for(colored pipe )Rs 50300.+ GST |
6(PRESSURE RATING) |
- |
250.00 |
|
GST CHARGES EXTRA |
7(NOMINAL DIAMETERS) |
- |
250.00 |
|
GST CHARGES EXTRA |
8(COLOUR) |
- |
300.00 |
|
GST CHARGES EXTRA |
9(DIMENSIONS OF PIPE) |
- |
250.00 |
|
GST CHARGES EXTRA |
10(VISUAL APPEARANCE) |
- |
300.00 |
|
GST CHARGES EXTRA |
11.1(Density (Method of test as per Table 3)) |
- |
700.00 |
|
GST CHARGES EXTRA |
11.2(Melt Flow Rate (Method of test as per Table 3)) |
- |
1100.00 |
|
GST CHARGES EXTRA |
11.3(Overall Migration) |
- |
2325.00 |
|
GST CHARGES EXTRA & SPECIMEN PREPRATION CHARGES |
11.4(Thermal Stability to Oxidation (Method of test as per Table 3)) |
- |
4400.00 |
|
INNER AND OUTER LAYER OF PE COMPOSITE PIPE AND GST CHARGES EXTRA |
11.5(Carbon Black Content and Dispersion (Method of test as per Table 3)) |
- |
925.00 |
|
GST CHARGES EXTRA |
11.6(Pigment Dispersion (For Coloured Pipes) (Method of test as per Table 3)) |
- |
700.00 |
|
GST CHARGES EXTRA |
11.7(Resistance to Weathering) |
- |
50300.00 |
|
Resistance to weathering a period of two years conditioning chargers for (colored pipe ) ,Elongation at break ,hydraulic characteristic( 1000 hour),Thermal stability test(OIT) . |
11.8(Adhesion Test) |
- |
1300.00 |
|
GST CHARGES EXTRA |
11.9(Apparent Tensile Strength of Pipe) |
- |
1800.00 |
|
GST CHARGES EXTRA & specimen preparation charges |
11.10(Minimum Burst Pressure) |
- |
1000.00 |
|
GST CHARGES EXTRA |
11.11(Hydraulic Characteristics) |
- |
7500.00 |
|
Hydraulic characteristic 20 0C for 1 hr , Hydraulic characteristic 60 0C for 10 hr& Hydraulic characteristic 95 0C for 170 hr. |
5(MATERIALS) |
- |
5625.00 |
|
OR OTHER : 81375.00 + GST PE-AL-PE COMPOSITE PRESSURE PIPES FOR BIS :Rs 61375.00 +GST AND Raw material Rs .5625.00 , aluminum METAL Rs.1600.00 clause no .11.7 Resistance to weathering a period of two years for(colored pipe )Rs 50300.+ GST |
6(PRESSURE RATING) |
- |
250.00 |
|
GST CHARGES EXTRA |
7(NOMINAL DIAMETERS) |
- |
250.00 |
|
GST CHARGES EXTRA |
8(COLOUR) |
- |
300.00 |
|
GST CHARGES EXTRA |
9(DIMENSIONS OF PIPE) |
- |
250.00 |
|
GST CHARGES EXTRA |
10(VISUAL APPEARANCE) |
- |
300.00 |
|
GST CHARGES EXTRA |
11.1(Density (Method of test as per Table 3)) |
- |
700.00 |
|
GST CHARGES EXTRA |
11.2(Melt Flow Rate (Method of test as per Table 3)) |
- |
1100.00 |
|
GST CHARGES EXTRA |
11.3(Overall Migration) |
- |
2325.00 |
|
GST CHARGES EXTRA & SPECIMEN PREPRATION CHARGES |
11.4(Thermal Stability to Oxidation (Method of test as per Table 3)) |
- |
4400 |
|
INNER AND OUTER LAYER OF PE COMPOSITE PIPE AND GST CHARGES EXTRA |
11.5(Carbon Black Content and Dispersion (Method of test as per Table 3)) |
- |
925 |
|
GST CHARGES EXTRA |
11.6(Pigment Dispersion (For Coloured Pipes) (Method of test as per Table 3)) |
- |
700.00 |
|
GST CHARGES EXTRA |
11.7(Resistance to Weathering) |
- |
50300.00 |
|
Resistance to weathering a period of two years conditioning chargers for (colored pipe ) ,Elongation at break ,hydraulic characteristic( 1000 hour),Thermal stability test(OIT) . |
11.8(Adhesion Test) |
- |
1300.00 |
|
GST CHEGES EXTRA |
11.9(Apparent Tensile Strength of Pipe) |
- |
1800 |
|
GST CHEGES EXTRA |
11.10(Minimum Burst Pressure) |
- |
1000.00 |
|
GST CHARGES EXTRA |
11.11(Hydraulic Characteristics) |
- |
7500.00 |
|
Hydraulic characteristic 20 0C for 1 hr , Hydraulic characteristic 60 0C for 10 hr& Hydraulic characteristic 95 0C for 170 hr. |
|
Complete
|
|
- |
- |
3 |
IS 14885 (2022) |
Polyethylene Pipes for the Supply of Gaseous Fuels � Specification (First Revision) |
-
|
384200.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.2(Grade of material) |
- |
250.00 |
|
FOR BIS: 384200 /- + GST EXTRA FOR PE PIPES FOR GASEOUS FULES.
FOR OTHER 509975/- +GST EXTRA FOR PE PIPES FOR GASEOUS FULES.CLAUSE NO. 5.5 COST OF CHEMICAL WILL BE EXTA OR SUPPLY BY THE PARTY |
4.3(Nominal Diameter) |
- |
250.00 |
|
GST CHARGES EXTRA |
4.4(Colour) |
- |
300.00 |
|
GST CHARGES EXTRA |
5.1(Polyethylene
compound) |
- |
6625.00 |
|
DENSITY TEST , MFI TEST , OIT TEST ,VOLATILE CONTENT TEST , WATER CONTENT . + GST CHARGES EXTRA . |
5.7(PE Compound Quality Evaluation) |
- |
400000.00 |
|
CLAUSE NO. 5.7 @HYDROULIC CHARECTRICSTIC 10000 HRS. (OPTIONAL )+ GST CHARGES EXTRA |
5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
6250.00 |
|
FILLING UP OF SYNTHETIC ON AND STAND IN AIR FOR 1500 HRS. ,AFTER CONDITIONING HYDROULIC CHARACTRICSTIC AT 20 HRS.AND SPECIMEN PREPRATION + GST CHARGES EXTRA |
5.6(Resistance to Weathering) |
- |
48600.00 |
|
Effect on sun light (Natural weathering )
a period of two years ,ELONGATION AT BREAK , HYDROULIC Characteristics1000 hrs, thermal stability test+ GST CHARGES EXTRA. |
6.1(Outside Diameter) |
- |
250.00 |
|
GST CHAREGES EXTRA |
6.1(Out of Roundness (Ovality)) |
- |
250.00 |
|
GST CHAREGES EXTRA |
6.2(Wall Thickness) |
- |
250.00 |
|
GST CHAREGES EXTRA |
7(Finish) |
- |
300.00 |
|
GST CHAREGES EXTRA |
8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
5050.00 |
|
ACCEPTANCE TEST 165 HRS @ 80 0c |
8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
4000.00 |
|
TYPE TEST 100 HRS @ 20 0c |
8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
11250.00 |
|
TYPE TEST1000 HRS @ 80 0c |
8.2(Reversion Test) |
- |
700.00 |
|
GST CHARGES EXTRA |
8.3(Density) |
- |
700.00 |
|
GST CHARGES EXTRA |
8.6(Thermal Stability (Oxidation Induction Time)) |
- |
2200.00 |
|
GST CHARGES EXTRA |
8.7(Volatile Matter Content) |
- |
700.00 |
|
GST CHARGES EXTRA |
8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
1550.00 |
|
YIELD STRENGTH AND SPCIMEN PREPARTION + GST CHARGES EXTRA |
8.9(Resistance to Weathering) |
- |
0.00 |
|
ALREADY ADDED TEST CHAREGES CLAUSE NO 5.6 |
6.4(Length of Pipe) |
- |
250.00 |
|
GST CHARGES EXTRA |
8.4(Melt Flow Rate (MFR)) |
- |
1100.00 |
|
GST CHARGES EXTRA |
8.5(Pigment Dispersion) |
- |
600.00 |
|
GST CHARGES EXTRA |
8.10(Slow Crack Growth Rate Test) |
- |
10800.00 |
|
GST TEST 165 HRS @ 80 0c ,500 HRS @80 0c AND SPECIMEN PREPARATION + GST CHARGES EXTRA |
8.11(Squeeze-off) |
- |
6350.00 |
|
SQEEZE OF TEST FOR 10 HRS. , HYDROULIC CHARACTERICSTIC 165 HRS @ 80 0c + GST CHGARGES EXTRA |
4.2(Grade of material) |
- |
250.00 |
|
GST CHARGES EXTRA |
4.3(Nominal Diameter) |
- |
250.00 |
|
GST CHARGES EXTRA |
4.4(Colour) |
- |
300.00 |
|
GST CHARGES EXTRA |
5.1(Polyethylene
compound) |
- |
6625.00 |
|
DENSITY TEST , MFI TEST , OIT TEST ,VOLATILE CONTENT TEST , WATER CONTENT . + GST CHARGES EXTRA . |
5.7(PE Compound Quality Evaluation) |
- |
400000.00 |
|
CLAUSE NO. 5.7 @HYDROULIC CHARECTRICSTIC 10000 HRS. (OPTIONAL )+ GST CHARGES EXTRA |
5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
6250.00 |
|
FILLING UP OF SYNTHETIC ON AND STAND IN AIR FOR 1500 HRS. ,AFTER CONDITIONING HYDROULIC CHARACTRICSTIC AT 20 HRS.AND SPECIMEN PREPRATION + GST CHARGES EXTRA |
5.6(Resistance to Weathering) |
- |
48600.00 |
|
Effect on sun light (Natural weathering )
a period of two years ,ELONGATION AT BREAK , HYDROULIC Characteristics1000 hrs, thermal stability test+ GST CHARGES EXTRA. |
6.1(Outside Diameter) |
- |
250 |
|
GST EXTRA |
6.1(Out of Roundness (Ovality)) |
- |
250.00 |
|
GST EXTRA |
6.2(Wall Thickness) |
- |
250.00 |
|
GST EXTRA |
7(Finish) |
- |
300.00 |
|
GST EXTRA |
8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
5050.00 |
|
TEST165 HRS @ 80 0c |
8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
4000.00 |
|
TYPE TEST165 HRS @ 80 0c |
8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
11250.00 |
|
TYPE TEST1000 HRS @ 80 0c |
8.2(Reversion Test) |
- |
700.00 |
|
GST CHARGES EXTRA |
8.3(Density) |
- |
700.00 |
|
GST CHARGES EXTRA |
8.6(Thermal Stability (Oxidation Induction Time)) |
- |
2200.00 |
|
GST CHARGES EXTRA |
8.7(Volatile Matter Content) |
- |
700.00 |
|
GST CHARGES EXTRA |
8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
1550.00 |
|
GST CHARGES EXTRA |
8.9(Resistance to Weathering) |
- |
0.00 |
|
ALREADY ADDED TEST CHAREGES CLAUSE NO 5.6 |
6.4(Length of Pipe) |
- |
250.00 |
|
GST CHARGES EXTRA |
8.4(Melt Flow Rate (MFR)) |
- |
1100.00 |
|
GST CHARGES EXTRA |
8.5(Pigment Dispersion) |
- |
600.00 |
|
GST CHARGES EXTRA |
8.10(Slow Crack Growth Rate Test) |
- |
10800.00 |
|
SCG TEST 165 HRS @ 80 0c ,500 HRS @80 0c AND SPECIMEN PREPARATION + GST CHARGES EXTRA |
8.11(Squeeze-off) |
- |
6350.00 |
|
SQEEZE OF TEST FOR 10 HRS. , HYDROULIC CHARACTERICSTIC 165 HRS @ 80 0c + GST CHGARGES EXTRA |
4.2(Grade of material) |
- |
250.00 |
|
GST CHARGES EXTRA |
4.3(Nominal Diameter) |
- |
250.00 |
|
GST CHARGES EXTRA |
4.4(Colour) |
- |
300.00 |
|
GST CHARGES EXTRA |
5.1(Polyethylene
compound) |
- |
6625.00 |
|
DENSITY TEST , MFI TEST , OIT TEST ,VOLATILE CONTENT TEST , WATER CONTENT . + GST CHARGES EXTRA . |
5.7(PE Compound Quality Evaluation) |
- |
400000 |
|
CLAUSE NO. 5.7 @HYDROULIC CHARECTRICSTIC 10000 HRS. (OPTIONAL )+ GST CHARGES EXTRA |
5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
6250.00 |
|
FILLING UP OF SYNTHETIC ON AND STAND IN AIR FOR 1500 HRS. ,AFTER CONDITIONING HYDROULIC CHARACTRICSTIC AT 20 HRS.AND SPECIMEN PREPRATION + GST CHARGES EXTRA |
5.6(Resistance to Weathering) |
- |
48600.00 |
|
Effect on sun light (Natural weathering )
a period of two years ,ELONGATION AT BREAK , HYDROULIC Characteristics1000 hrs, thermal stability test+ GST CHARGES EXTRA. |
6.1(Outside Diameter) |
- |
250.00 |
|
GST CHARGES EXTRA |
6.1(Out of Roundness (Ovality)) |
- |
250.00 |
|
GST CHARGES EXTRA |
6.2(Wall Thickness) |
- |
250.00 |
|
GST CHARGES EXTRA |
7(Finish) |
- |
300.00 |
|
GST CHARGES EXTRA |
8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
5050 |
|
TEST165 HRS @ 80 0c |
8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
4000.00 |
|
TYPE TEST165 HRS @ 80 0c |
8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
11250.00 |
|
TYPE TEST1000 HRS @ 80 0c |
8.2(Reversion Test) |
- |
700 |
|
GST CHEGES EXTRA |
8.3(Density) |
- |
700 |
|
GST CHEGES EXTRA |
8.6(Thermal Stability (Oxidation Induction Time)) |
- |
2200.00 |
|
GST CHEGES EXTRA |
8.7(Volatile Matter Content) |
- |
700.00 |
|
GST CHEGES EXTRA |
8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
1550.00 |
|
GST CHEGES EXTRA WITH SPECIMEN CHARGES |
8.9(Resistance to Weathering) |
- |
0.00 |
|
ALREADY ADDED TEST CHAREGES CLAUSE NO 5.6 |
6.4(Length of Pipe) |
- |
250.00 |
|
GST CHEGES EXTRA |
8.4(Melt Flow Rate (MFR)) |
- |
1100.00 |
|
GST CHEGES EXTRA |
8.5(Pigment Dispersion) |
- |
600.00 |
|
GST CHEGES EXTRA |
8.10(Slow Crack Growth Rate Test) |
- |
10850.00 |
|
GST TEST 165 HRS @ 80 0c ,500 HRS @80 0c AND SPECIMEN PREPARATION + GST CHARGES EXTRA |
8.11(Squeeze-off) |
- |
6350.00 |
|
SQEEZE OF TEST FOR 10 HRS. , HYDROULIC CHARACTERICSTIC 165 HRS @ 80 0c + GST CHGARGES EXTRA |
|
Complete
|
|
- |
- |
4 |
IS 16703 (2017) |
Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification |
-
|
22067.50 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1(Mass of Bale) |
- |
250.00 |
|
Woven sack for packaging test charges 22067.50 + extra 18 % GST charges |
5.2 Table 1(Dimensions) |
- |
250.00 |
|
- |
5.2 Table 1(Dimensions) |
- |
250.00 |
|
- |
5.2 Table 1(Dimensions) |
- |
250.00 |
|
- |
5.2 Table 1(Dimensions) |
- |
250.00 |
|
- |
5.2 Table 1(Picks per dm) |
- |
250.00 |
|
- |
5.2 Table 1(Ends per dm) |
- |
250.00 |
|
- |
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964) |
- |
250.00 |
|
- |
5.2 Table 1(Average breaking strength of fabric [Ravelled strip
method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1)) |
- |
12380 |
|
Average breaking strength charges 2200 .00+ UV exposure @ 192 hr. charges 10180.00 |
5.2 Table 1(Average breaking strength of fabric [Ravelled strip
method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1)) |
- |
2200.00 |
|
Average breaking strength of after UV charges 2200 .00 |
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip
method), Min, N) (kgf) - IS 9030) |
- |
1100.00 |
|
- |
5.2 Table 1(Elongation at break of fabric (Ravelled strip method),
percent : IS 1969 (Part 1)) |
- |
2200.00 |
|
- |
5.2 Table 1(Drop impact strength) |
- |
1100.00 |
|
- |
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks) |
- |
950.00 |
|
- |
|
Complete
|
|
- |
- |
5 |
IS 15450 (2004) |
Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification |
-
|
16069.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
8, Table-2(Dimension) |
- |
250.00 |
|
Pipe test charges 16068.78.00+ extra 18% GST charges
clause no .10.8 of hydraulic test charges test charges 2700.00
clause no. 11.1 long term test charges 4800.00 & clause no.11.1.2 migration test charges 2325.00
Clause no.11.1.3 OIT charges 2200 |
10.1(Density ) |
- |
500.00 |
|
- |
10.6(Apparent tensile strength of pipe) |
- |
1600.00 |
|
Appearance tensile strength charges 1100.00+ Specimen preparation charges 500.00 |
10.7(minimum burst pressure) |
- |
1000.00 |
|
- |
Clause 10.3 table 3(Carbon black content) |
- |
925.00 |
|
- |
|
Complete
|
|
- |
- |
6 |
IS 15801 (2008) |
Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification |
-
|
112057.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl 4( Designation) |
- |
0.00 |
|
Pipe testing charges 107513 + Extra GST charges
Material testing charges 4544+ Extra GST charges |
Cl 7(Dimensions Of Pipes) |
- |
250.00 |
|
- |
Cl 8(Visual Appearance) |
- |
300.00 |
|
- |
Cl 9.1(Hydraulic Characteristics) |
- |
18400.00 |
|
Acceptance Test 20 oC /hr. Charges 1000.00
Acceptance Test 95 oC /22hr. Charges 1600.00
Type test charges 95 oC /165 hr.Charges 4800.00
Type test charges 95 oC /1000 hr.Charges 11000.00 |
Cl 9.2(Fusion Compatibility) |
- |
4800.00 |
|
Type test 95 oC /165 hr. |
Cl 9.3(Reversion Test ) |
- |
1000.00 |
|
Reversion test charges 1000 .00 + Specimen preparation charges 300.00 |
Cl 9.4 & Annex B(Impact Strength) |
- |
1400 |
|
Impact strength test charges 1100 .00 + Specimen preparation charges 300.00 |
Cl 9.5(Density) |
- |
500.00 |
|
- |
Cl 9.6(Melt Flow Rate) |
- |
1100.00 |
|
- |
Cl 9.7(Carbon Black Content & Dispersion) |
- |
1625.00 |
|
Carbon black content charges 925.00 + Carbon black dispersion charge 700.00 |
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing) |
- |
83825.00 |
|
Hydrostatic test charges 1700.00 + Conditioning test charges 82125.00 |
|
Complete
|
|
- |
- |
7 |
IS 13487 (1992) |
Irrigation equipment - Emitters - Specification |
-
|
3525.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
7.1(Construction and workmanship) |
- |
300.00 |
|
3525.00 + Extra 18 % GST charges |
7.2(Flow path in emitters) |
- |
300.00 |
|
- |
7.3.1(Resistance to Hydrostatic pressure) |
- |
1000.00 |
|
- |
7.3.2(Resistance to Hydrostatic pressure) |
- |
0.00 |
|
Resistance to hydrostatic pressure test charges added to clause no. 7.3.1 |
7.3.3(Resistance to Hydrostatic pressure) |
- |
0.00 |
|
Resistance to hydrostatic pressure test charges added to clause no. 7.3.1 |
7.4.1(Emitter Pull Out In-line emitters) |
- |
500.00 |
|
- |
7.4.2(Emitter Pull Out On-line emitters) |
- |
500.00 |
|
- |
8.1.2(Uniformity of Emission Rate Unregulated emitters) |
- |
1000.00 |
|
- |
8.1.3(Uniformity of Emission Rate Regulated emitters) |
- |
1000.00 |
|
- |
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters) |
- |
1000.00 |
|
- |
8.2.3(Emission rate as a function of inlet pressure Regulated emitters) |
- |
1000 |
|
- |
8.3(Determination of Emitter Exponent) |
- |
600.00 |
|
- |
|
Complete
|
|
- |
- |
8 |
IS 13488 (2008) |
Irrigation equipment - Emitting pipe systems - Specification (First Revision) |
-
|
9056.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent ) |
- |
925.00 |
|
9056 & Extra 18 % GST |
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density) |
- |
500.00 |
|
- |
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989) |
- |
700 |
|
- |
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
700.00 |
|
- |
6.2.2(Fittings) |
- |
0.00 |
|
All dimension test Charges Added to clause No. 8.3.1 |
6.3(General) |
- |
300.00 |
|
- |
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes) |
- |
1000.00 |
|
- |
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes) |
- |
1000.00 |
|
- |
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure) |
- |
1000.00 |
|
- |
8.2.1(Unregu/Qt~d Emining Pipe) |
- |
1000.00 |
|
- |
8.2.2(Regulated Emitting Pipes) |
- |
1000.00 |
|
- |
8.3.1(Wall Thickness ofEmitting Pipe) |
- |
250.00 |
|
- |
8.3.2(Inside Diameter ofEmitting Pipe) |
- |
0.00 |
|
All dimension test Charges Added to clause No. 8.3.1 |
8.3.3(Flow Paths in Emitting Unit) |
- |
400 |
|
- |
8.3.4(Spacing ofEmitter Units) |
- |
0.00 |
|
Flow path emitting units & spacing test Charges Added to clause No. 8.3.3 |
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature) |
- |
1600 |
|
- |
8.5(Resistance to Tension at Elevated Temperature) |
- |
1100.00 |
|
- |
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting
IS 13479) |
- |
400.00 |
|
- |
8.7.2(Resistance of PE Emitting Pipe to
Environmental Stress Cracking - Type Test
Annex D of IS 12786) |
- |
2800.00 |
|
1200 of Acceptance Test (77 oC/ hr. )
1600 of Type test (77 oC/ 48 hr. ) |
8.8(Determination of Emitting Unit Exponent) |
- |
600.00 |
|
- |
|
Complete
|
|
- |
- |
9 |
IS 4985 (2000) |
Unplasticized pvc pipes for potable water supplies - Specification (Third Revision) |
-
|
8606 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
500 |
|
Testing Charges are Excluding GST
PVC Resin Testing Charge : 3075 Extra |
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
500 |
|
Testing Charges are Excluding GST |
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
850 |
|
Testing Charges are Excluding GST |
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring
Sockets) |
- |
850 |
|
Testing Charges are Excluding GST |
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
850 |
|
Testing Charges are Excluding GST |
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
500 |
|
Testing Charges are Excluding GST |
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1100 |
|
Testing Charges are Excluding GST |
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
700 |
|
Testing Charges are Excluding GST |
11.2(Resistance to External Blows at 0°C) |
- |
1000 |
|
Testing Charges are Excluding GST |
7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
500 |
|
Testing Charges are Excluding GST |
Clause 10.7(Sulphated Ash Content) |
- |
950 |
|
Testing Charges are Excluding GST |
9.1(PIPE ENDS) |
- |
500 |
|
Testing Charges are Excluding GST |
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
300 |
|
Testing Charges are Excluding GST |
8(SEALING RINGS) |
- |
0 |
|
- |
5(CLASSIFICATION OF PIPES) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
10 |
IS 15778 (2007) |
Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
-
|
139119 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6.3.2
IS 13360 (Part 3/See 1)(Density) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1
IS 12235 (Part 1)
Table 2(Dimension of Pipes:
Mean outside Diameter) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1,7.1.1
IS 12235 (Part 1)
Table 2(Outside Diameter at any point) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1.2
IS 12235 (Part 1)
Table 2(Wall Thickness ) |
- |
500 |
|
Testing Charges are Excluding GST |
9.4
IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test :
When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.) |
- |
700 |
|
Testing Charges are Excluding GST |
9.5
IS 12235(Part 2)(Vicat Softening Temperature:
When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen
shall not be less than 110°C.) |
- |
1100 |
|
Testing Charges are Excluding GST |
9.6
IS 12235(Part 14)(Density) |
- |
500 |
|
Testing Charges are Excluding GST |
10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
850 |
|
Testing Charges are Excluding GST |
10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
4800 |
|
Testing Charges are Excluding GST |
10.1
Table 3
IS 12235
(Part 8/Sec 1)(Hydrostatic Characteristics) |
- |
11000 |
|
Testing Charges are Excluding GST |
10.2
Table 3
IS 12235
(Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing) |
- |
110500 |
|
Testing Charges are Excluding GST |
10.3
IS 4985
Table 4(Resistance to External Blow at O°C:
When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.) |
- |
1400 |
|
Testing Charges are Excluding GST |
10.4
IS 12235(Part 19)(Flattening Test) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1.3 (Effective length) |
- |
500 |
|
Testing Charges are Excluding GST |
10.5
IS 12235(Part 13)(Tensile Strength :
When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C.
) |
- |
1600 |
|
Testing Charges are Excluding GST |
9.1(Visual Appearance) |
- |
300 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
11 |
IS 14151 : Part 2 (2008) |
Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision) |
-
|
34981 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6.1.3.1.1(Weldability Test) |
- |
1600 |
|
Testing Charges are Excluding GST |
6.1.3, 6.1.3.1(Weldability Test) |
- |
4800 |
|
Testing Charges are Excluding GST |
6.1.2.2( Hydraulic Proof Test) |
- |
850 |
|
Testing Charges are Excluding GST |
6.1.1, 6.1.1.1(Leakage Test) |
- |
850 |
|
Testing Charges are Excluding GST |
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.) |
- |
500 |
|
Testing Charges are Excluding GST |
4.2.7(End caps Table 1 of IS 8008 (Part 9)) |
- |
500 |
|
Testing Charges are Excluding GST |
7.2.1 (Visual and Workmanship Requirement) |
- |
300 |
|
Testing Charges are Excluding GST |
6.1.3.2 (Quick coupled fittings) |
- |
0 |
|
- |
6.2, 6.2.1 (Quick Coupled Fittings) |
- |
0 |
|
- |
4.1 .3(Workmanship and Appearance) |
- |
300 |
|
Testing Charges are Excluding GST |
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A)) |
- |
375 |
|
Testing Charges are Excluding GST |
Cl 4.1.5(Rubber rings- B) Change in hardness) |
- |
0 |
|
- |
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:) |
- |
375 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
12 |
IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
-
|
9594 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
9.6(Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
1100 |
|
Testing charges are Excluding GST
In Addition PVC Resin testing charge : 3075 |
9.5(Tensile Strength
IS 12235(Part 13)) |
- |
1100 |
|
Testing charges are Excluding GST |
9.4 and Table 14(Resistance to External Blows at 0 ?C
IS 12235 (Part 9)) |
- |
1000 |
|
Testing charges are Excluding GST |
9.3(Density
IS 12235 (Part 14)) |
- |
500 |
|
Testing charges are Excluding GST |
7.2 and Table 5, 6 & 7
Fig 1B(DIMENSIONS - Casing Pipes) |
- |
1000 |
|
Testing charges are Excluding GST |
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content ) |
- |
1100 |
|
Testing charges are Excluding GST |
9.1( Visual Appearance) |
- |
0 |
|
- |
5(COLOUR) |
- |
0 |
|
- |
7.3.2(Rib height) |
- |
0 |
|
- |
7.3.1(No.of Ribs) |
- |
350 |
|
- |
8.4(Sealing elements
a. Elastomeric material
b. Shore A hardness of sealing Elements
) |
- |
375 |
|
Testing charges are Excluding GST |
|
Complete
|
|
- |
- |
13 |
IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
-
|
31869.00 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
8.10(Slow Crack Growth Rate) |
- |
6000.00 |
|
Raw Material Test Charges: 4525+GST
Test Charges are excluding GST |
8.8(Tensile Strength for Butt-fusion) |
- |
1600 |
|
Test Charges are excluding GST |
8.7(Density) |
- |
500 |
|
Test Charges are excluding GST |
8.5 (Oxidation Induction Time) |
- |
2200 |
|
Test Charges are excluding GST |
8.2(Longitudinal Reversion Test) |
- |
900 |
|
Test Charges are excluding GST |
8.6(Overall migration) |
- |
2000 |
|
Test Charges are excluding GST |
8.3(Carbon black) |
- |
925 |
|
Test Charges are excluding GST |
5.2(Polyethylene Resin) |
- |
4525 |
|
Test Charges are excluding GST |
7.2(Length) |
- |
0 |
|
- |
6.2(Colour) |
- |
0 |
|
- |
6.1.4(PIPE DESCRIPTION) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
14 |
IS 15410 (2003) |
Containers for packaging of natural mineral water and packaged drinking water - Specification |
-
|
6938 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.0 (chem)(MATERIAL) |
- |
1050 |
|
Testing Charges are Excluding GST |
4.6.4(DROP TEST) |
- |
1100 |
|
Testing Charges are Excluding GST |
4.6.5(MIGRATION TEST) |
- |
1700 |
|
Testing Charges are Excluding GST |
4.6.6(PORTABILITY TEST) |
- |
2900 |
|
Testing Charges are Excluding GST |
4.6.5.1 (chem)(Colour migration (Caps)) |
- |
1700 |
|
Testing Charges are Excluding GST |
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps)) |
- |
0 |
|
- |
4.2(Design, Shape & Dimension ) |
- |
300 |
|
Testing Charges are Excluding GST |
4.6.2(TRANSPARANCY) |
- |
700 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
15 |
IS 10889 (2004) |
High density polyethylene films (First Revision) |
-
|
7825 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6.1.4(Density) |
- |
500 |
|
Testing Charges are Excluding GST
Total test charge is for Black film only |
6.1.5(Melt Flow Rate) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.2.1, Table 1(Nominal Thickness) |
- |
250 |
|
Testing Charges are Excluding GST |
6.2.2, Table 2(Nominal Width) |
- |
250 |
|
Testing Charges are Excluding GST |
6.4.1(Tensile Strength at Break) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.4.1, Table 4(Direction) |
- |
1100 |
|
Testing Charges are Excluding GST
Machine Direction
Transverse Direction |
6.4.3, Table 6(Impact Failure Load) |
- |
1000 |
|
Testing Charges are Excluding GST |
6.4.2(Elongation at Break) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2(Black Compound) |
- |
925 |
|
Testing Charges are Excluding GST
CBC-925
CBD-700 |
6.4.3(Impact Resistance (Falling Dart)) |
- |
1000 |
|
Testing Charges are Excluding GST |
6.1.1(Appearance) |
- |
300 |
|
Testing Charges are Excluding GST |
6.1.2(Film Form) |
- |
0 |
|
- |
6.1.3(Odour ) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
16 |
IS 15609 (2005) |
Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification |
-
|
10500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5(Material) |
- |
1050 |
|
Testing Charges are Excluding GST |
6.1.5 A-2 of IS: 2508:2016(Thickness) |
- |
200 |
|
Testing Charges are Excluding GST |
6.1.7 IS: 9845:1998(Migration- b. Colour migration) |
- |
1700 |
|
Testing Charges are Excluding GST |
6.1.6(Width) |
- |
250 |
|
Testing Charges are Excluding GST |
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance) |
- |
850 |
|
Testing Charges are Excluding GST |
7.3 Annex G(Drop test ) |
- |
900 |
|
Testing Charges are Excluding GST |
7.4 Annex H(Ink adhesion test for printed pouches) |
- |
500 |
|
Testing Charges are Excluding GST |
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour) |
- |
2900 |
|
Testing Charges are Excluding GST |
7.5 Annex J(Product resistance test for printed pouches) |
- |
500 |
|
Testing Charges are Excluding GST |
6.1.4(Odour) |
- |
0 |
|
- |
6.1.2(Film Form) |
- |
0 |
|
- |
6.1.3(Winding of the Film ) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
17 |
IS 14887 (2014) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision) |
-
|
17793 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.2 and Table 1 vi(Average breaking strength of fabric ) |
- |
1100 |
|
.. |
3.2(Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
250 |
|
Testing Charges are Excluding GST |
3.2(Tapes – Linear Density
(IS 6192/IS 11197)) |
- |
500 |
|
Testing Charges are Excluding GST |
3.2(Tapes – Tenacity (IS 6192/IS 11197)) |
- |
1100 |
|
Testing Charges are Excluding GST |
4.2 and Table 1 v(Mass of sack ) |
- |
300 |
|
Testing Charges are Excluding GST |
4.2 and Table 1 vi(Average breaking strength of fabric ) |
- |
2000 |
|
Testing Charges are Excluding GST |
4.2 and Table 1 x(Ash content ) |
- |
950 |
|
Testing Charges are Excluding GST |
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192)) |
- |
700 |
|
Testing Charges are Excluding GST |
3.2(Tapes – Dimensional stability (PP)
(IS 11197)) |
- |
700 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 iii(Ends per dm ) |
- |
200 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 iv(Picks per dm ) |
- |
200 |
|
Testing Charges are Excluding GST |
4.2 and Table 1 ii(Dimensions ) |
- |
250 |
|
Testing Charges are Excluding GST |
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
2200 |
|
Testing Charges are Excluding GST |
4.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1100 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
18 |
IS 14252 (2015) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision) |
-
|
20040 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.2(Tapes – Width
) |
- |
250 |
|
Testing Charges are Excluding GST |
3.1(Raw Material) |
- |
2000 |
|
Testing Charges are Excluding GST |
3.2(Tapes – Linear Density
) |
- |
500 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 i a(Dimensions Outside Length) |
- |
250 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 i b(Dimensions Outside Width) |
- |
250 |
|
Testing Charges are Excluding GST |
4.2 and Table 1 iv(Mass of sack
) |
- |
250 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 v a(Average breaking strength of fabric Warpway
) |
- |
1100 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 v b(Average breaking strength of fabric Weftway
) |
- |
1100 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 vi(Average Breaking strength of bottom seam ) |
- |
1100 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise) |
- |
1100 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise ) |
- |
1100 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
10340 |
|
Testing Charges are Excluding GST |
4.1 and Table 1 ix(Ash content ) |
- |
950 |
|
Testing Charges are Excluding GST |
3.3(Tying Cord) |
- |
250 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
19 |
IS 14968 (2015) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision) |
-
|
20580 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.1(Raw Material) |
- |
2000 |
|
Testing Charges are Excluding GST |
4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
250 |
|
Testing Charges are Excluding GST |
4.2(Tapes – Linear Density
) |
- |
500 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
250 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
250 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise
IS 1969 (Part 1)) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise
IS 1969 (Part 1)) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.1 and Table 1 v a(Mass of unlaminated sack
IS 1964) |
- |
250 |
|
Testing Charges are Excluding GST |
5.1 and Table 1 v b(Mass of unlaminated sack with liner
) |
- |
250 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 vi(Breaking strength of bottom seam
IS 9030
) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise
IS 1969 (Part 1)) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise
IS 1969 (Part 1)) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
10180 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 x(Ash content ) |
- |
950 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 iii(Ends per dm ) |
- |
250 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 iv(Picks per dm ) |
- |
250 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
20 |
IS 16208 (2015) |
Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification |
-
|
20430 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.1(Raw Material) |
- |
2000 |
|
Testing Charges are Excluding GST |
4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
250 |
|
Testing Charges are Excluding GST |
4.2(Tapes – Linear Density
) |
- |
500 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
250 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
250 |
|
Testing Charges are Excluding GST |
5.1 and Table 1 v(Mass of sack ) |
- |
250 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise ) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise ) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise ) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
10180 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 x(Ash content ) |
- |
950 |
|
Testing Charges are Excluding GST |
4.3.2(Mouth) |
- |
0 |
|
- |
5.2 and Table 1 iii(Ends per dm ) |
- |
250 |
|
Testing Charges are Excluding GST |
5.2 and Table 1 iv(Picks per dm ) |
- |
250 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
21 |
IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
-
|
19456 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
1100 |
|
Testing Charges are Excluding GST |
5.1.6a(Carbon Black Content, Annex-A) |
- |
925 |
|
Testing Charges are Excluding GST |
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
700 |
|
Testing Charges are Excluding GST |
5.1.6b(Ash Content, Annex-A) |
- |
950 |
|
Testing Charges are Excluding GST |
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
4300 |
|
Testing Charges are Excluding GST |
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
1100 |
|
Testing Charges are Excluding GST |
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
1100 |
|
Testing Charges are Excluding GST |
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) ) |
- |
1000 |
|
Testing Charges are Excluding GST |
8.1, Table 3(Tear resistance , Annex B) |
- |
750 |
|
Testing Charges are Excluding GST
Specimen charge / Conditioning charge :250 |
6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
750 |
|
Testing Charges are Excluding GST
Specimen charge / Conditioning charge :250 |
9.1, Table 4(Puncture resistance , Annex C) |
- |
750 |
|
Testing Charges are Excluding GST |
5.1.1(Appearance) |
- |
300 |
|
Testing Charges are Excluding GST |
5.1.2(Film Form) |
- |
200 |
|
Testing Charges are Excluding GST |
5.1.3(Odour) |
- |
200 |
|
Testing Charges are Excluding GST |
8.1, Table 3(Puncture resistance , Annex C) |
- |
1100 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
22 |
IS 9755 (2016) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision) |
-
|
30785 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.) |
- |
250 |
|
Testing charges are excluding GST |
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/
HDPE.) |
- |
250 |
|
Testing charges are excluding GST |
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE) |
- |
250 |
|
Testing charges are excluding GST |
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm) |
- |
250 |
|
Testing charges are excluding GST |
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.) |
- |
250 |
|
Testing charges are excluding GST |
3.4(Liner-The width of the loose liner shall be minimum 20 mm more
than the width of the sack.) |
- |
250 |
|
Testing charges are excluding GST |
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.) |
- |
250 |
|
Testing charges are excluding GST |
3.6(Bottom Seam-tThe stitching shall be done
with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.) |
- |
250 |
|
Testing charges are excluding GST |
3.1(MANUFACTURE-Raw Material) |
- |
1050 |
|
Testing charges are excluding GST |
4.3(Mass-(Annexure E)) |
- |
500 |
|
Testing charges are excluding GST |
4.1 , Table 1(REQUIREMENTS) |
- |
17130 |
|
Testing charges are excluding GST |
3.3.1(Sacks-Table 1) |
- |
4900 |
|
Testing charges are excluding GST |
|
Complete
|
|
- |
- |
23 |
IS 11652 (2017) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision) |
-
|
30330 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.2
(width of tape, 2.5 mm ± 0.1 mm) |
- |
250 |
|
Testing Charges are Excluding GST
For Non Stabilized Testing Charge is 13463 Excluding GST |
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to a) UV Radiation -Annex F ) |
- |
12380 |
|
Testing Charges are Excluding GST |
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to b) Accelerated Weathering - Annex F ) |
- |
12380 |
|
Testing Charges are Excluding GST |
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
2200 |
|
Testing Charges are Excluding GST |
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) gusseted type 71 + 6%) |
- |
500 |
|
Testing Charges are Excluding GST |
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2
) |
- |
950 |
|
Testing Charges are Excluding GST |
4.2
(Linear Density, 900 denier) |
- |
500 |
|
Testing Charges are Excluding GST |
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) ) |
- |
2200 |
|
Testing Charges are Excluding GST |
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
2200 |
|
Testing Charges are Excluding GST |
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
2200 |
|
Testing Charges are Excluding GST |
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25) |
- |
2200 |
|
Testing Charges are Excluding GST |
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25) |
- |
2200 |
|
Testing Charges are Excluding GST |
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6
) |
- |
950 |
|
Testing Charges are Excluding GST |
|
Complete
|
|
- |
- |
24 |
IS 7834 : Part 1 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements |
-
|
4219 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl. 6.4(Short-Term Hydraulic Test- Appendix D) |
- |
850 |
|
Testing Charges are Excluding GST
PVC Resin Testing Charges: 3075 |
Cl.4(Minimum Thickness) |
- |
500 |
|
Testing Charges are Excluding GST |
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length) |
- |
500 |
|
Testing Charges are Excluding GST |
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length) |
- |
500 |
|
Testing Charges are Excluding GST |
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter) |
- |
500 |
|
Testing Charges are Excluding GST |
Cl. 6.1(Stress Relief Test- Appendix A) |
- |
700 |
|
Testing Charges are Excluding GST |
Cl. 6.2(Opacity- Appendix B) |
- |
575 |
|
Testing Charges are Excluding GST |
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C) |
- |
3000 |
|
Testing Charges are Excluding GST |
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C) |
- |
0 |
|
- |
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C) |
- |
0 |
|
- |
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
25 |
IS 7834 : Part 2 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows |
-
|
4219 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
table 1 sl.no: 01(16
) |
- |
500 |
|
Testing Charges are Excluding GST
PVC Resin Testing Charges are : 3075 |
table 1 sl.no: 02(20
) |
- |
500 |
|
Testing Charges are Excluding GST |
table 1 sl.no: 03(25
) |
- |
500 |
|
Testing Charges are Excluding GST |
table 1 sl.no: 04(32
) |
- |
500 |
|
Testing Charges are Excluding GST |
table 1 sl.no: 05(40
) |
- |
500 |
|
Testing Charges are Excluding GST |
table 1 sl.no: 06(50
) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.2, Table 1(Size) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.2, Table 1(45 ̊ Elbow Laying
Length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3( inside diameter of the socket) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3(socket length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.1(General) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
26 |
IS 7834 : Part 3 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows |
-
|
4219 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
cl 2.2.2(Dimensions) |
- |
500 |
|
Testing Charges are Excluding GST
In Addition PVC Resin Testing Charge : 3075 |
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C ) |
- |
3000 |
|
Testing Charges are Excluding GST |
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C) |
- |
0 |
|
- |
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C) |
- |
0 |
|
- |
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
27 |
IS 7834 : Part 4 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees |
-
|
4219 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
2.2.2, Table 1(Size) |
- |
500 |
|
Testing Charges are Excluding GST
In Addition PVC resin Testing Charge : 3075 |
2.2.3( inside diameter of the socket) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.2, Table 1(90 ̊ Elbow Laying
Length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3(Socket length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.1(General) |
- |
0 |
|
- |
2.2(Manufacture) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
28 |
IS 7834 : Part 5 (1987) |
Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees |
-
|
4219 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
2.2.2, Table 1(Size) |
- |
500 |
|
Testing Charges are Excluding GST
In Addition PVC Resin testing Charges : 3075 |
2.2.2, Table 1(45 ̊ Tees Laying
Length, Z) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.2, Table 1(45 ̊ Tees Laying
Length, Z1) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3( inside diameter of the socket) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3(Socket length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.1(General) |
- |
0 |
|
- |
2.2(Manufacture) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
29 |
IS 7834 : Part 6 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets |
-
|
4219 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
2.2.2, Table 1(Size) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.2, Table 1(Socket Laying
Length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3( inside diameter of the socket) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3(Socket length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.1(General) |
- |
0 |
|
- |
2.2(Manufacture) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |
30 |
IS 7834 : Part 7 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions |
-
|
4219 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
2.2.2, Table 1(Size) |
- |
500 |
|
Testing Charges are Excluding GST
In Addition PVC Resin testing Charge : 3075 |
2.2.2, Table 1(Union Laying
Length) |
- |
500 |
|
Testing Charges are Excluding GST |
2.2.3( inside diameter of the socket) |
- |
500 |
|
Testing Charges are Excluding GST |
2.1(General) |
- |
0 |
|
- |
2.2(Manufacture) |
- |
0 |
|
- |
|
Complete
|
|
- |
- |