BIS - LIMS (Laboratory Information Management System)

Central institute of Petrochemicals Engineering & Technology, Raipur

PLOT NO 48, INDUSTRIAL ARE BHANPURI, BHANPURI, Raipur, Raipur, Chhattisgarh, 493221

7869955231 cipetraipur@gmail.com

Scope List

Reset

45 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

30330 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	Testing Charges are Excluding GST For Non Stabilized Testing Charge is 13463 Excluding GST
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	12380	Testing Charges are Excluding GST
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	12380	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2200	Testing Charges are Excluding GST
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	500	Testing Charges are Excluding GST
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	Testing Charges are Excluding GST
4.2 (Linear Density, 900 denier)	-	500	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2200	Testing Charges are Excluding GST
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2200	Testing Charges are Excluding GST
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	950	Testing Charges are Excluding GST

Complete

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	Testing Charges are Excluding GST PVC Resin Testing Charges: 3075
Cl.4(Minimum Thickness)	-	500	Testing Charges are Excluding GST
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	500	Testing Charges are Excluding GST
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	500	Testing Charges are Excluding GST
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	500	Testing Charges are Excluding GST
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	Testing Charges are Excluding GST
Cl. 6.2(Opacity- Appendix B)	-	575	Testing Charges are Excluding GST
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	Testing Charges are Excluding GST
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-

Complete

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	Testing Charges are Excluding GST PVC Resin Testing Charges are : 3075
table 1 sl.no: 02(20 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 03(25 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 04(32 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 05(40 )	-	500	Testing Charges are Excluding GST
table 1 sl.no: 06(50 )	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.3(socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-

Complete

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	Testing Charges are Excluding GST In Addition PVC Resin Testing Charge : 3075
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	Testing Charges are Excluding GST
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	0	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0	-

Complete

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST In Addition PVC resin Testing Charge : 3075
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3(Socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST In Addition PVC Resin testing Charges : 3075
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.3(Socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST
2.2.2, Table 1(Socket Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.2.3(Socket length)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	Testing Charges are Excluding GST In Addition PVC Resin testing Charge : 3075
2.2.2, Table 1(Union Laying Length)	-	500	Testing Charges are Excluding GST
2.2.3( inside diameter of the socket)	-	500	Testing Charges are Excluding GST
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2(diameter of the socket of cap)	-	500	Testing Charges are Excluding GST In Addition PVC Resin 3075
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-

Complete

IS 12100 (1987)

Specification for high density polyethylene (HDPE) woven sacks for packing flour

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Widthwise)	-	1100	Testing Charges are Excluding GST HDPE Woven sack For Packing Flour ( With Liner) Testing charges are : 9000
3.1, Table 1(Breaking strength of fabric on 5 × 20 cm strip, Lengthwise)	-	1100	Testing Charges are Excluding GST
3.1, Table 1(Seam breaking strength, Side team)	-	2200	Testing Charges are Excluding GST
3.1, Table 1(Seam breaking strength, Bottom team)	-	2200	Testing Charges are Excluding GST
3.2(Dimensions)	-	250	Testing Charges are Excluding GST
3.3(Mass)	-	500	Testing Charges are Excluding GST

Complete

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

9725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c.iii (Volatile matter - Annex B )	-	925	Testing Charges are Excluding GST
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	Testing Charges are Excluding GST
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	Testing Charges are Excluding GST
7.3(Tensile Test)	-	1100	Testing Charges are Excluding GST
7.3(Elongation at Break)	-	1100	Testing Charges are Excluding GST
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	Testing Charges are Excluding GST
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	Testing Charges are Excluding GST
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	250	Testing Charges are Excluding GST
7.2(Reversion Test)	-	700	Testing Charges are Excluding GST
4.1.c.i (Density)	-	500	Testing Charges are Excluding GST
7.1(Hydraulic Characteristics)	-	1000	Testing Charges are Excluding GST Quality Test for 100 hrs test charge : 3000 + GST
4.1.c.ii (Toluene extract - Annex A)	-	1100	Testing Charges are Excluding GST
6.0 (6.1) (Visual appearance)	-	300	Testing Charges are Excluding GST

Complete

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

15100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	Testing Charges are Excluding GST
4.2.3(Carbon Dispersion Test)	-	700	Testing Charges are Excluding GST
7.4(Tensile Strength)	-	1350	Testing Charges are Excluding GST
7.5(Flexural Modulus)	-	1600	Testing Charges are Excluding GST
7.6(overall Migration)	-	2200	Testing Charges are Excluding GST
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3050	Testing Charges are Excluding GST
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	-
6.1(Finish)	-	300	Testing Charges are Excluding GST
5(Types and Features )	-	0	-
7.1.1(Resistance to Deformation)	-	700	Testing Charges are Excluding GST
7.2(Resistance to Impact)	-	1100	Testing Charges are Excluding GST
7.3(Test for Top Load Resistance)	-	900	Testing Charges are Excluding GST
9.2.1(Man-Hole and Hand-Hole Lids)	-	0	-
9.1(Lid Thickness)	-	0	-
5.4(Wall Thickness above effective height)	-	0	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	0	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	0	-

Complete

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

9281 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions of pipes)	-	250	Testing Charges are Excluding GST In addition Raw Material testing Charges: 4294
8.1(Hydraulic characteristics)	-	1600	Testing Charges are Excluding GST Type Test testing Charge : 4800
8.2(Reversion)	-	700	Testing Charges are Excluding GST
8.3(Density)	-	500	Testing Charges are Excluding GST
8.4(Melt Flow Rate)	-	1100	Testing Charges are Excluding GST
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Testing Charges are Excluding GST
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	Testing Charges are Excluding GST
7(Visual Appearance)	-	300	Testing Charges are Excluding GST
4(Colour)	-	300	Testing Charges are Excluding GST
10(Marking)	-	0	-
3(Designation)	-	0	-

Complete

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

15069 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	Testing Charges are Excluding GST Raw Material Testing Charges : 4244
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	Testing Charges are Excluding GST
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	Testing Charges are Excluding GST
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Testing Charges are Excluding GST
5.1.2(Ovality)	-	500	Testing Charges are Excluding GST
7.1 Table -2(Hydraulic Characteristics)	-	1600	Testing Charges are Excluding GST Quality Test Charge : 4800 as per table-2
7.3(Tensile Test)	-	1350	Testing Charges are Excluding GST
7.2(Reversion Test)	-	1000	Testing Charges are Excluding GST
7.6(Melt now Rate (MFR))	-	1100	Testing Charges are Excluding GST
7.4table-2(Fusion Compatibility Test)	-	1600	Testing Charges are Excluding GST
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	4800	Testing Charges are Excluding GST

Complete

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

IRRIGATION EQUIPMENT-QUICK COUPLED POLYETHYLENE PIPES

49544.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	250.00	Test Charges 43669.00 + Specimen charges 5875.00+ GST Extra
5(Dimensions of pipe - ii) Wall thickness minimum)	-	250.00	GST extra
6(Visual Appearance)	-	300.00	GST extra
7.1(Hydraulic Characteristics - Quality test)	-	4800.00	Quality test 165 hr. test charges 4800.00+ GST Extra
7.1(Hydraulic Characteristics - Acceptance test)	-	1600.00	Acceptance test 48 hr. test charges 1600.00+ GST Extra
7.2(Reversion Test)	-	1000.00	Test charges 700.00 + Specimen Charges 300.00 + GST Extra
7.3(Tensile Test- i) Tensile Strength)	-	1100.00	Tensile strength & Elongation at break Test charges 1100.00 + Specimen Preparation charges 300.00+ GST Extra
7.3(Tensile Test - ii)Elongation at Break)	-	300.00	Tensile strength & Elongation at break Test charges 1100.00 + Specimen Preparation charges 300.00+ GST Extra
7.4(Fusion Compatibility Test- a) Quality test)	-	4800.00	Quality test 165 hr. test charges 4800.00+ GST Extra
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600.00	Acceptance test 48 hr. test charges 1600.00+ GST Extra
7.5(Density)	-	1125.00	Test charges 500.00+ Specimen Charges 625.00+ GST Extra
7.6(Melt Flow Rate)	-	1100.00	GST Extra
7.6(Melt Flow Rate)	-	1100.00	GST Extra
4.2(Carbon black- a)carbon content)	-	925.00	GST Extra
4.2(Carbon black- b) Dispersion of carbon black)	-	700.00	GST Extra
7.6(Melt now Rate (MFR))	-	1100.00	GST Extra
7.5(Density)	-	1125.00	Test charges 500.00+ Specimen Charges 625.00+ GST Extra
7.4 Table-2(Fusion Compatibility Test)	-	6400.00	Quality test 165 hr. test charges 4800.00+ Acceptance test 48 hr. test charges 1600.00 + GST Extra
7.3(Tensile Test)	-	1400.00	Tensile strength & Elongation at break Test charges 1100.00 + Specimen Preparation charges 300.00+ GST Extra
7.2(Reversion Test)	-	1000.00	Test charges 700.00 + Specimen Charges 300.00 + GST Extra
7.1 Table -2(Hydraulic Characteristics)	-	6400.00	Quality test 165 hr. test charges 4800.00+ Acceptance test 48 hr. test charges 1600.00 + GST Extra
6.1(VISUAL APPEARANCE)	-	300.00	GST Extra
5.1.2(Ovality)	-	250.00	GST Extra
5.1 table -1(DIMENSIONS OF PIPES)	-	750.00	OD, Ovality & Wall thickness Test charge + GST Extra
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925.00	GST Extra
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100.00	GST Extra
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125.00	Test charges 500.00+ Specimen Charges 625.00+ GST Extra
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100.00	GST Extra
4.1(Quick Coupled Male and Female Couplers)	-	13650.00	Quick coupled Male & Female ( Base density, MFI, OIT ,Volatile matter. Water content, CBC,CBD Test charges+ GST Extra
4.1(Quick Coupled Male and Female Couplers)	-	250.00	Thickness + GST Extra
4.1.3(Workmanship and appearance)	-	300.00	GST Extra
4.1.4(Holding attachments for coupler parts)	-	850.00	GST
6.1.3(Weldability Test- a) Quality test)	-	4800.00	Quality Test 165 hr. Charges +GST Extra
6.1.3(Weldability Test- b) Acceptance test)	-	1600.00	Acceptance Test 48 hr. Charges+ GST Extra
4.1 (a)(Quick Coupled Male and Female Couplers)	-	250.00	GST Extra
4.1 (b)(HDPE couplers —)	-	1050.00	GST Extra

Complete

Bureau of Indian Standards

The National Standards Body of India

Central institute of Petrochemicals Engineering & Technology, Raipur

PLOT NO 48, INDUSTRIAL ARE BHANPURI, BHANPURI, Raipur, Raipur, Chhattisgarh, 493221

7869955231 cipetraipur@gmail.com

Scope List