BIS - LIMS (Laboratory Information Management System)

Central institute of Petrochemicals Engineering & Technology, Raipur

PLOT NO 48, INDUSTRIAL AREA BHANPURI, BHANPURI, Raipur, Raipur, Chhattisgarh, 493221

7869955231 cipetraipur@gmail.com

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

upto 63mm & above 63mm dia

56175.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300.00	For BIS ( up to 63mm dia.) test charges 45,125.00 + GST Charges For BIS (Above 63 mm dia) . Charges 56,175.00 + GST Charges For Cl No: 5.5 Chemical charges shall be extra. Cl no: 5.6 (optional) Type test 10,000hrs/20 deg C, charges 4,00,000.00+GST
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	500.00	Material Testing
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100.00	Material Testing
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200.00	Material Testing
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250.00	Condensate and stand i n air for 1500 hr . Charges 1000.00 & Specimen preparation charges 4000.00 After Conditioning hydro hydraulic at 20 hr. charges 1000.00 & Specimen preparation charges 250.00 chemical charges shall be extra.
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600.00	Material Testing
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	300.00	Pipe Testing
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	200.00	Pipe Testing
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	300.00	Pipe Testing
6.4(Length of pipe)	-	200.00	Pipe Testing
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	300.00	Pipe Testing
8.1(Hydraulic Charactristics, Annex-A)	-	20300.00	Hydraulic Characteristic 165 hr .Charges 4800.00 & specimen charges 250.00 100 hr. charges 4000.00 1000 hr. Charges 11000.00 & Specimen charges 250.00
8.2(Reversion Test. Annex-C)	-	700.00	Pipe Testing
8.3(Density, Annex A of IS 7328)	-	500.00	Pipe Testing
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100.00	Pipe Testing
8.5(Thermal Stability to Oxidation, Annex-D)	-	2200.00	Pipe Testing
8.7(Tensile yield strength, Annex-J)	-	1250.00	Tensile Strength charges 1100.00 & Specimen Charges 250.00
8.7(Elongation at break, Annex-J)	-	1250.00	Elongation at break charges 1100.00 & Specimen Charges 250.00
8.8(Resistance to Weathering, Annex-F)	-	12800.00	Weathering charges at 6 month 9000.00 Elongation at break 1100.00 & specimen charges 250.00 OIT charges 2200.00
8.9(Squeeze off, Annex-G)	-	1300.00	Pipe Testing

Complete

25 Apr, 2025

-
-

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

Up to 355 mm diameter

384200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	250.00	FOR BIS: 384200 /- + GST EXTRA FOR PE PIPES FOR GASEOUS FULES. FOR OTHER 509975/- +GST EXTRA FOR PE PIPES FOR GASEOUS FULES.CLAUSE NO. 5.5 COST OF CHEMICAL WILL BE EXTA OR SUPPLY BY THE PARTY
4.3(Nominal Diameter)	-	250.00	GST CHARGES EXTRA
4.4(Colour)	-	300.00	GST CHARGES EXTRA
5.1(Polyethylene compound)	-	6625.00	DENSITY TEST , MFI TEST , OIT TEST ,VOLATILE CONTENT TEST , WATER CONTENT . + GST CHARGES EXTRA .
5.7(PE Compound Quality Evaluation)	-	400000.00	CLAUSE NO. 5.7 @HYDROULIC CHARECTRICSTIC 10000 HRS. (OPTIONAL )+ GST CHARGES EXTRA
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	6250.00	FILLING UP OF SYNTHETIC ON AND STAND IN AIR FOR 1500 HRS. ,AFTER CONDITIONING HYDROULIC CHARACTRICSTIC AT 20 HRS.AND SPECIMEN PREPRATION + GST CHARGES EXTRA
5.6(Resistance to Weathering)	-	48600.00	Effect on sun light (Natural weathering ) a period of two years ,ELONGATION AT BREAK , HYDROULIC Characteristics1000 hrs, thermal stability test+ GST CHARGES EXTRA.
6.1(Outside Diameter)	-	250.00	GST CHAREGES EXTRA
6.1(Out of Roundness (Ovality))	-	250.00	GST CHAREGES EXTRA
6.2(Wall Thickness)	-	250.00	GST CHAREGES EXTRA
7(Finish)	-	300.00	GST CHAREGES EXTRA
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5050.00	ACCEPTANCE TEST 165 HRS @ 80 0c
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4000.00	TYPE TEST 100 HRS @ 20 0c
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11250.00	TYPE TEST1000 HRS @ 80 0c
8.2(Reversion Test)	-	700.00	GST CHARGES EXTRA
8.3(Density)	-	700.00	GST CHARGES EXTRA
8.6(Thermal Stability (Oxidation Induction Time))	-	2200.00	GST CHARGES EXTRA
8.7(Volatile Matter Content)	-	700.00	GST CHARGES EXTRA
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1550.00	YIELD STRENGTH AND SPCIMEN PREPARTION + GST CHARGES EXTRA
8.9(Resistance to Weathering)	-	0.00	ALREADY ADDED TEST CHAREGES CLAUSE NO 5.6
6.4(Length of Pipe)	-	250.00	GST CHARGES EXTRA
8.4(Melt Flow Rate (MFR))	-	1100.00	GST CHARGES EXTRA
8.5(Pigment Dispersion)	-	600.00	GST CHARGES EXTRA
8.10(Slow Crack Growth Rate Test)	-	10800.00	GST TEST 165 HRS @ 80 0c ,500 HRS @80 0c AND SPECIMEN PREPARATION + GST CHARGES EXTRA
8.11(Squeeze-off)	-	6350.00	SQEEZE OF TEST FOR 10 HRS. , HYDROULIC CHARACTERICSTIC 165 HRS @ 80 0c + GST CHGARGES EXTRA
4.2(Grade of material)	-	250.00	GST CHARGES EXTRA
4.3(Nominal Diameter)	-	250.00	GST CHARGES EXTRA
4.4(Colour)	-	300.00	GST CHARGES EXTRA
5.1(Polyethylene compound)	-	6625.00	DENSITY TEST , MFI TEST , OIT TEST ,VOLATILE CONTENT TEST , WATER CONTENT . + GST CHARGES EXTRA .
5.7(PE Compound Quality Evaluation)	-	400000.00	CLAUSE NO. 5.7 @HYDROULIC CHARECTRICSTIC 10000 HRS. (OPTIONAL )+ GST CHARGES EXTRA
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	6250.00	FILLING UP OF SYNTHETIC ON AND STAND IN AIR FOR 1500 HRS. ,AFTER CONDITIONING HYDROULIC CHARACTRICSTIC AT 20 HRS.AND SPECIMEN PREPRATION + GST CHARGES EXTRA
5.6(Resistance to Weathering)	-	48600.00	Effect on sun light (Natural weathering ) a period of two years ,ELONGATION AT BREAK , HYDROULIC Characteristics1000 hrs, thermal stability test+ GST CHARGES EXTRA.
6.1(Outside Diameter)	-	250	GST EXTRA
6.1(Out of Roundness (Ovality))	-	250.00	GST EXTRA
6.2(Wall Thickness)	-	250.00	GST EXTRA
7(Finish)	-	300.00	GST EXTRA
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5050.00	TEST165 HRS @ 80 0c
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4000.00	TYPE TEST165 HRS @ 80 0c
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11250.00	TYPE TEST1000 HRS @ 80 0c
8.2(Reversion Test)	-	700.00	GST CHARGES EXTRA
8.3(Density)	-	700.00	GST CHARGES EXTRA
8.6(Thermal Stability (Oxidation Induction Time))	-	2200.00	GST CHARGES EXTRA
8.7(Volatile Matter Content)	-	700.00	GST CHARGES EXTRA
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1550.00	GST CHARGES EXTRA
8.9(Resistance to Weathering)	-	0.00	ALREADY ADDED TEST CHAREGES CLAUSE NO 5.6
6.4(Length of Pipe)	-	250.00	GST CHARGES EXTRA
8.4(Melt Flow Rate (MFR))	-	1100.00	GST CHARGES EXTRA
8.5(Pigment Dispersion)	-	600.00	GST CHARGES EXTRA
8.10(Slow Crack Growth Rate Test)	-	10800.00	SCG TEST 165 HRS @ 80 0c ,500 HRS @80 0c AND SPECIMEN PREPARATION + GST CHARGES EXTRA
8.11(Squeeze-off)	-	6350.00	SQEEZE OF TEST FOR 10 HRS. , HYDROULIC CHARACTERICSTIC 165 HRS @ 80 0c + GST CHGARGES EXTRA
4.2(Grade of material)	-	250.00	GST CHARGES EXTRA
4.3(Nominal Diameter)	-	250.00	GST CHARGES EXTRA
4.4(Colour)	-	300.00	GST CHARGES EXTRA
5.1(Polyethylene compound)	-	6625.00	DENSITY TEST , MFI TEST , OIT TEST ,VOLATILE CONTENT TEST , WATER CONTENT . + GST CHARGES EXTRA .
5.7(PE Compound Quality Evaluation)	-	400000	CLAUSE NO. 5.7 @HYDROULIC CHARECTRICSTIC 10000 HRS. (OPTIONAL )+ GST CHARGES EXTRA
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	6250.00	FILLING UP OF SYNTHETIC ON AND STAND IN AIR FOR 1500 HRS. ,AFTER CONDITIONING HYDROULIC CHARACTRICSTIC AT 20 HRS.AND SPECIMEN PREPRATION + GST CHARGES EXTRA
5.6(Resistance to Weathering)	-	48600.00	Effect on sun light (Natural weathering ) a period of two years ,ELONGATION AT BREAK , HYDROULIC Characteristics1000 hrs, thermal stability test+ GST CHARGES EXTRA.
6.1(Outside Diameter)	-	250.00	GST CHARGES EXTRA
6.1(Out of Roundness (Ovality))	-	250.00	GST CHARGES EXTRA
6.2(Wall Thickness)	-	250.00	GST CHARGES EXTRA
7(Finish)	-	300.00	GST CHARGES EXTRA
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5050	TEST165 HRS @ 80 0c
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4000.00	TYPE TEST165 HRS @ 80 0c
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11250.00	TYPE TEST1000 HRS @ 80 0c
8.2(Reversion Test)	-	700	GST CHEGES EXTRA
8.3(Density)	-	700	GST CHEGES EXTRA
8.6(Thermal Stability (Oxidation Induction Time))	-	2200.00	GST CHEGES EXTRA
8.7(Volatile Matter Content)	-	700.00	GST CHEGES EXTRA
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1550.00	GST CHEGES EXTRA WITH SPECIMEN CHARGES
8.9(Resistance to Weathering)	-	0.00	ALREADY ADDED TEST CHAREGES CLAUSE NO 5.6
6.4(Length of Pipe)	-	250.00	GST CHEGES EXTRA
8.4(Melt Flow Rate (MFR))	-	1100.00	GST CHEGES EXTRA
8.5(Pigment Dispersion)	-	600.00	GST CHEGES EXTRA
8.10(Slow Crack Growth Rate Test)	-	10850.00	GST TEST 165 HRS @ 80 0c ,500 HRS @80 0c AND SPECIMEN PREPARATION + GST CHARGES EXTRA
8.11(Squeeze-off)	-	6350.00	SQEEZE OF TEST FOR 10 HRS. , HYDROULIC CHARACTERICSTIC 165 HRS @ 80 0c + GST CHGARGES EXTRA

Complete

25 Apr, 2025

-
-

IS 15450 (2004)

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

16069.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8, Table-2(Dimension)	-	250.00	Pipe test charges 16068.78.00+ extra 18% GST charges clause no .10.8 of hydraulic test charges test charges 2700.00 clause no. 11.1 long term test charges 4800.00 & clause no.11.1.2 migration test charges 2325.00 Clause no.11.1.3 OIT charges 2200
10.1(Density )	-	500.00	-
10.6(Apparent tensile strength of pipe)	-	1600.00	Appearance tensile strength charges 1100.00+ Specimen preparation charges 500.00
10.7(minimum burst pressure)	-	1000.00	-
Clause 10.3 table 3(Carbon black content)	-	925.00	-

Complete

25 Apr, 2025

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

8606 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	Testing Charges are Excluding GST PVC Resin Testing Charge : 3075 Extra
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	Testing Charges are Excluding GST
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	Testing Charges are Excluding GST
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	Testing Charges are Excluding GST
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	Testing Charges are Excluding GST
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Testing Charges are Excluding GST
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Testing Charges are Excluding GST
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	Testing Charges are Excluding GST
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	Testing Charges are Excluding GST
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	Testing Charges are Excluding GST
11.2(Resistance to External Blows at 0°C)	-	1000	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	Testing Charges are Excluding GST
Clause 10.7(Sulphated Ash Content)	-	950	Testing Charges are Excluding GST
9.1(PIPE ENDS)	-	500	Testing Charges are Excluding GST
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Testing Charges are Excluding GST
8(SEALING RINGS)	-	0	-
5(CLASSIFICATION OF PIPES)	-	0	-

Complete

25 Apr, 2025

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

34981 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.3.1.1(Weldability Test)	-	1600	Testing Charges are Excluding GST
6.1.3, 6.1.3.1(Weldability Test)	-	4800	Testing Charges are Excluding GST
6.1.2.2( Hydraulic Proof Test)	-	850	Testing Charges are Excluding GST
6.1.1, 6.1.1.1(Leakage Test)	-	850	Testing Charges are Excluding GST
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	Testing Charges are Excluding GST
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	500	Testing Charges are Excluding GST
7.2.1 (Visual and Workmanship Requirement)	-	300	Testing Charges are Excluding GST
6.1.3.2 (Quick coupled fittings)	-	0	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	0	-
4.1 .3(Workmanship and Appearance)	-	300	Testing Charges are Excluding GST
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	Testing Charges are Excluding GST
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	0	-
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	375	Testing Charges are Excluding GST

Complete

25 Apr, 2025

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

30785 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	250	Testing charges are excluding GST
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	250	Testing charges are excluding GST
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	250	Testing charges are excluding GST
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	250	Testing charges are excluding GST
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	250	Testing charges are excluding GST
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	250	Testing charges are excluding GST
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	250	Testing charges are excluding GST
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	250	Testing charges are excluding GST
3.1(MANUFACTURE-Raw Material)	-	1050	Testing charges are excluding GST
4.3(Mass-(Annexure E))	-	500	Testing charges are excluding GST
4.1 , Table 1(REQUIREMENTS)	-	17130	Testing charges are excluding GST
3.3.1(Sacks-Table 1)	-	4900	Testing charges are excluding GST

Complete

25 Apr, 2025

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

9281 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions of pipes)	-	250	Testing Charges are Excluding GST In addition Raw Material testing Charges: 4294
8.1(Hydraulic characteristics)	-	1600	Testing Charges are Excluding GST Type Test testing Charge : 4800
8.2(Reversion)	-	700	Testing Charges are Excluding GST
8.3(Density)	-	500	Testing Charges are Excluding GST
8.4(Melt Flow Rate)	-	1100	Testing Charges are Excluding GST
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Testing Charges are Excluding GST
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	Testing Charges are Excluding GST
7(Visual Appearance)	-	300	Testing Charges are Excluding GST
4(Colour)	-	300	Testing Charges are Excluding GST
10(Marking)	-	0	-
3(Designation)	-	0	-

Complete

25 Apr, 2025

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

15069 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	Testing Charges are Excluding GST Raw Material Testing Charges : 4244
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	Testing Charges are Excluding GST
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	Testing Charges are Excluding GST
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Testing Charges are Excluding GST
5.1.2(Ovality)	-	500	Testing Charges are Excluding GST
7.1 Table -2(Hydraulic Characteristics)	-	1600	Testing Charges are Excluding GST Quality Test Charge : 4800 as per table-2
7.3(Tensile Test)	-	1350	Testing Charges are Excluding GST
7.2(Reversion Test)	-	1000	Testing Charges are Excluding GST
7.6(Melt now Rate (MFR))	-	1100	Testing Charges are Excluding GST
7.4table-2(Fusion Compatibility Test)	-	1600	Testing Charges are Excluding GST
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	4800	Testing Charges are Excluding GST

Complete

25 Apr, 2025

-
-

Bureau of Indian Standards

The National Standards Body of India

Central institute of Petrochemicals Engineering & Technology, Raipur

PLOT NO 48, INDUSTRIAL AREA BHANPURI, BHANPURI, Raipur, Raipur, Chhattisgarh, 493221

7869955231 cipetraipur@gmail.com

Scope List