BIS - LIMS (Laboratory Information Management System)

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

9868670895 laxmirawat@shriraminstitute.org

Scope List

Reset

72 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

PVC U Pipe

25550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	1000	30% Discount
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	5000	30% Discount
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	1500	30% Discount
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	-
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	1500	30% Discount
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	0	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1500	30% Discount
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	2500	30% Discount
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	2500	30% Discount
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	5000	30% Discount
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1500	30% Discount
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1500	30% Discount
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2500	30% Discount
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1500	30% Discount
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	2500	30% Discount
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1500	30% Discount
8.6(Effect on Water Test)	-	5000	30% Discount
14(Marking)	-	0	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	0	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	0	-
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	-
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	-
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	0	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	0	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	0	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	0	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	0	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	0	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	0	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	0	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	0	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	0	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	0	-
8.6(Effect on Water Test)	-	0	-
14(Marking)	-	0	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	-

Complete

31 Dec, 2023

Included w.e.f 23.12.2024

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

32550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	1000	30% Discount
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	1500	30% Discount
10.7(Sulphated Ash Content)	-	2500	30% Discount
5(CLASSIFICATION OF PIPES)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	1500	30% Discount
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	-
8(SEALING RINGS)	-	1000	30% Discount
9.1(PIPE ENDS)	-	1000	30% Discount
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1500	30% Discount
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	30% Discount
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2500	30% Discount
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	30% Discount
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	30% Discount
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	-
11.2(Resistance to External Blows at 0°C)	-	15000	30% Discount
10.3(Effect on Water Test)	-	5000	30% Discount
6.1.2(PVC Resin)	-	1500	30% Discount
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	0	-
6.1.1(VCM Content)	-	5000	30% Discount
7.2.1.2b(Maximum inner diameter of groove)	-	0	-
13(Marking)	-	0	-
10.1(Colour)	-	0	-
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
10.7(Sulphated Ash Content)	-	0	-
5(CLASSIFICATION OF PIPES)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0	-
8(SEALING RINGS)	-	0	-
9.1(PIPE ENDS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	0	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	0	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	0	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0	-
11.2(Resistance to External Blows at 0°C)	-	0	-
10.3(Effect on Water Test)	-	0	-
6.1.2(PVC Resin)	-	0	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	0	-
6.1.1(VCM Content)	-	0	-
7.2.1.2b(Maximum inner diameter of groove)	-	0	-
13(Marking)	-	0	-
7.1.4(Length)	-	0	-

Complete

31 Dec, 2023

Included w.e.f 23.12.2024

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

39900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1000	30% Discount
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	2500	30% Discount
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	4000	30% Discount
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1500	30% Discount
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	2500	30% Discount
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1500	30% Discount
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	2500	30% Discount
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1500	30% Discount
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	-
5.3(Density of Higher olefin - IS 7328:2020)	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	-
5.3(Ash content- Any Method)	-	0	-
5.3(Toluene extract - Any Method)	-	0	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0	-
5.3(Carbon black particle size - Any Method)	-	0	-
6(Pipe Description - IS 14333-2022)	-	1000	30% Discount
6.2(Colour- IS 14333-2022)	-	1000	30% Discount
7.1(Visual Appearance- IS 14333-2022)	-	1000	30% Discount
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	1500	30% Discount
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	15000	30% Discount
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	7500	30% Discount
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	2500	30% Discount
8.3(Carbon black content- IS 2530-1963)	-	0	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1500	30% Discount
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	0	-
8.6(Density-IS 7328:2020)	-	0	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	2000	30% Discount
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	2000	30% Discount
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	5000	30% Discount
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	0	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	0	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	0	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	0	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	0	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	0	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	0	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	-
5.2.1.1, T2(Compound ash content - Any Method)	-	0	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	-
5.3(Density of Higher olefin - IS 7328:2020)	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	-
5.3(Ash content- Any Method)	-	0	-
5.3(Toluene extract - Any Method)	-	0	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0	-
5.3(Carbon black particle size - Any Method)	-	0	-
6(Pipe Description - IS 14333-2022)	-	0	-
6.2(Colour- IS 14333-2022)	-	0	-
7.1(Visual Appearance- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	0	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	0	-
8.3(Carbon black content- IS 2530-1963)	-	0	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	0	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	0	-
8.6(Density-IS 7328:2020)	-	0	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	0	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	0	-
7.2(Length- IS 14333-2022)	-	0	-
7.3(Coiling- IS 14333-2022)	-	0	-

Complete

31 Dec, 2023

Included w.e.f 23.12.2024 Exclusion : Cl 5.3 (Olefin Constituents- 14333-2022), Cl 5.4 (Antioxidant - Any Method)

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1 (IS 1954 : 1990) The bag shall conform to the requirements specified in Table 1.(i) Dimensions ( see Note ):)	-	1500	Less 30% discount
Cl.5.1 1& Cl.8.5.2 of IS 9113 : 1993 The bag shall conform to the requirements specified in Table (Corrected mass per bag, g:)	-	1500	Less 30% discount
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Ends per dm)	-	1500	Less 30% discount
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Picks per dm)	-	1500	Less 30% discount
Cl.5.1 (IS 1969 : 1990) The bag shall conform to the requirements specified in Table 1.(Breaking load of cloth ( Min ) ( revelled strip method. 10 × 20 cm ):)	-	5000	Less 30% discount
Cl.5.1 (IS 9030 : 1990) The bag shall conform to the requirements specified in Table 1.(Scam breaking load ( Min ) ( revelled strip method, 5 × 20 cm ) N ( kgf ))	-	2500	Less 30% discount

Complete

31 Dec, 2023

IS 4751 (2023)

Potassium metabisulphite food grade - Specification

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	Rebate 30% Discount
3.2(Identification Test)	-	2000	Rebate 30% Discount
3.2.1(Acidicty to solution of phenol red)	-	2000	Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs
3..2.2(Decolourize solution of iodine)	-	2000	Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs
3.2.3.1(Test for Potassium)	-	2000	Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs
3.2.3.2(Test for Sulphite)	-	2000	Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs
3.3 Table 1(i)(Purity, as K₂S₂O₅)	-	2500	Rebate 30% Discount
3.3 Table 1(ii)(Water insoluble matter)	-	1000	Rebate 30% Discount
3.3 Table 1(iii)(Thiosulphate)	-	1000	Rebate 30% Discount
3.3 Table 1(iv)(Arsenic (as As))	-	2000	Rebate 30% Discount
3.3 Table 1(v)(Iron (as Fe))	-	1000	Rebate 30% Discount
3.3 Table 1(vi)(Selenium (as Se))	-	1000	Rebate 30% Discount
3.3 Table 1(viii)(Lead (as Pb))	-	1000	Rebate 30% Discount
3.3 Table 1(vii)(pH)	-	1000	Rebate 30% Discount

Complete

31 Dec, 2023

IS 10508 (2020)

Phosphoric Acid, Food Grade - Specification ( Second Revision )

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.3(Copper (as Cu))	-	1000	Rebate 30% Discount
Clause 3.3(Tin (as Sn))	-	1000	Rebate 30% Discount
Clause 3.3(Cadmium (as Cd))	-	1000	Rebate 30% Discount
Clause 3.3(Mercury (as Hg))	-	2000	Rebate 30% Discount
Clause 3.3(Molybednum (as Mo))	-	1000	Rebate 30% Discount
Clause 3.3(Aluminium (as Al))	-	1000	Rebate 30% Discount

Complete

31 Dec, 2023

IS 8249 (2019)

Zinc sulphate heptahydrate, agricultural grade - Specification (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	30% Discount
(Clauses 3.2 and 6.2) Table 1(Zinc (as Zn))	-	2500	30% Discount
(Clauses 3.2 and 6.2) Table 1(Magnesium (as Mg))	-	1000	30% Discount
(Clauses 3.2 and 6.2) Table 1(Copper (as Cu))	-	1000	30% Discount
(Clauses 3.2 and 6.2) Table 1(Lead (as Pb))	-	1000	30% Discount
(Clauses 3.2 and 6.2) Table 1(pH)	-	1000	30% Discount
(Clauses 3.2 and 6.2) Table 1(Matter insoluble in water)	-	1000	30% Discount
(Clauses 3.2 and 6.2) Table 1(Sulphur (as S))	-	1000	30% Discount
(Clauses 3.2 and 6.2) Table 1(Cadmium (as Cd))	-	1000	30% Discount
(Clauses 3.2 and 6.2) Table 1(Arsenic (as As))	-	1000	30% Discount

Complete

31 Dec, 2023

IS 8887 (2018)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9)	-	1500	30 % Discount & Homogeneity Test as per Clause No. 6.1 follow = 3000rs
6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117)	-	1500	30 % Discount
6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C)	-	2000	30% Discount
6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D)	-	2000	30 % Discount
6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E)	-	6000	30 % Discount
6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance: Coating, dry aggregate (Grade RS-1) Annex F)	-	1000	30 % Discount
6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G)	-	1500	30 % Discount
6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H)	-	1500	30 % Discount
6.2-Table 1-x)(Distillation in percent volume of distillate recovered at 360°C at 1) 190°C 2) 225°C 3) 260°C 4) 316°C 5) Residue at 360°C, percent, Min)	-	3500	30 % Discount
6.2-Table 1-ix)(Tests on residue: 1) Residue by evaporation, percent, Min 2) Penetration 25°C/100g/5 sec 3) Ductility 27°C/cm, Min 4) Solubility I tricholoethylne, percent by mass, Min)	-	7000	30 % Discount
xi, Table-1(Water content)	-	2500	30 % Discount

Complete

31 Dec, 2023

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

Use as Admixture in cement mortar and concrete

23095 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clase No.7.1, Table No.2, Sl.No.i(Fineness-Specific surface by Blaine's permeability method)	-	2000	30% Discount
Clase No.7.1, Table No.2, Sl.No.iii(Soundness by autoclave tests)	-	2500	30% Discount
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	2000	30% Discount
5.1, 6.1, Table 1(Loss on ignition)	-	2000	30% Discount
5.1, 6.1, Table 1(Total chlorides)	-	1000	30% Discount
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	1000	30% Discount
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	2000	30% Discount
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	1000	30% Discount
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	1000	30% Discount
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	6000	30% Discount

Complete

31 Dec, 2023

IS 7933 (2022)

Specification for Flexible Polyurethane Foam for Domestic Mattresses First Revision

Type I and Type II

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Constituents)	-	1500	Rebate 30% Discount
5.2(appearance and odour)	-	1500	Rebate 30% Discount
5.3(Colour)	-	1500	Rebate 30% Discount
5.4(Dimensions and Tolerances)	-	1500	Rebate 30% Discount
5.6(Indentation Hardness Index (for Type 1 and 2))	-	2500	Rebate 30% Discount
5.7(Durability (for Type 1 and 2))	-	2000	Rebate 30% Discount
5.8, Table 1, i)(Density,)	-	1500	Rebate 30% Discount
5.8, Table 1, ii)(Tensile strength)	-	2500	Rebate 30% Discount
5.8, Table 1, iii)(Heat ageing)	-	1500	Rebate 30% Discount
5.8, Table 1, iv)(Compression set)	-	3000	Rebate 30% Discount

Complete

31 Dec, 2023

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

23250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	2500	-
4.8(Stability to accelerated ageing )	-	3000	-
4.9(Insulation resistance test)	-	5000	-
4.7(Electrolytic corrosion)	-	7000	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-
Cl.No.4 of IS 7809 (Part 1)-1975(Appearance)	-	200	-
Cl.No.5 of IS 7809 (Part 1)-1975(Freedom From Deffects)	-	200	-
Cl.No.3.2(Width)	-	1000	Charges of Thickness,width,length (Dimension) are same that is Rs=1000/-
Cl.No.3.3(Length)	-	1000	Charges of Thickness,width,length (Dimension) are same that is Rs=1000/-
Cl.No.3.4(Thickness)	-	1000	Charges of Thickness,width,length (Dimension) are same that is Rs=1000/-
Cl.No.4.1(Tensile Strength)	-	1500	-
Cl.No.4.2(Adhesion to Steel)	-	2000	-
Cl.No.4.3(Adhesion to backing)	-	2000	-
Cl.No.4.4(Electric Strength at RT)	-	2500	-
Cl.No.4.5(Electric Strength after Humid Conditioning)	-	5000	-
Cl.No.4.6(Flammability)	-	2500	-

Complete

31 Dec, 2023

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

18231 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	1000	30% DISCOUNT
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	5000	30% DISCOUNT
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	0	Charges of Yield strength & Elongation are included in Tensile charges
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	0	Charges of Yield strength & Elongation are included in Tensile charges
Cl 18(Weight)	-	1000	30% DISCOUNT
Cl. 15, 16(Width )	-	0	-
Cl. 15, 16(Thickness )	-	0	-
Cl 11.3(Press)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	30% DISCOUNT
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	30% DISCOUNT
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	30% DISCOUNT
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	30% DISCOUNT
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	30% DISCOUNT
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	30% DISCOUNT
Cl 12(Sudden Load Applied)	-	1500	30% DISCOUNT
15(Dimensions AxB)	-	1000	30% DISCOUNT
Clause 12(Impact Test)	-	11000	30% DISCOUNT
Clause 7(Freedom from Defect)	-	1000	30% DISCOUNT
Cl 11.3(Press)	-	2500	30% DISCOUNT

Complete

31 Dec, 2023

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

9726 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	3000	LESS 30% DISCOUNT
6.1(Sulphur %)	-	3000	LESS 30% DISCOUNT
6.1(Phosphorus %)	-	3000	LESS 30% DISCOUNT
6.1(Manganese %)	-	3000	LESS 30% DISCOUNT
6.1( Copper %)	-	0	0
Cl. 10.1 (a)(Macro Examination)	-	2500	LESS 30% DISCOUNT
Cl. 10.1 (b)(Sulphur Print)	-	3500	LESS 30% DISCOUNT
Clause 10.3(Camber)	-	1000	LESS 30% DISCOUNT
Clause 10.2(Bend)	-	2500	LESS 30% DISCOUNT
Clause 9(Freedom from Defect)	-	500	LESS 30% DISCOUNT
11(Dimensions)	-	1000	LESS 30% DISCOUNT

Complete

31 Dec, 2023

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Belt Pitch Length)	-	1500	Rebate 30% Discount
10.1(Elongation)	-	2500	Rebate 30% Discount & charges of tensile strength & Elongation are included as same i.e rs=2500/-
10.1(Tensile Strength)	-	2500	Rebate 30% Discount & charges of tensile strength & Elongation are included as same i.e rs=2500/-
7.2(Test Matched Belts)	-	2000	Rebate 30% Discount
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	1500	Rebate 30% Discount
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	1500	Rebate 30% Discount
Clause 5 Table 1(Nominal Height (T))	-	1500	Rebate 30% Discount
Clause 5 Table 1(Nominal Included Angle (A))	-	2500	Rebate 30% Discount
5 Table 1(Cross sectional dimension)	-	1500	Rebate 30% Discount
5 Table 1(Cross sectional dimension)	-	2000	Rebate 30% Discount & This is charges of Belt pitch Length (Clause : 7.1) i.e rs=2000/-

Complete

31 Dec, 2023

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

31000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	2400	Less 30% discount
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	2400	Less 30% discount
8.1 Table 2 Table 3(Manganese Content IS 228)	-	2400	Less 30% discount
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	2400	Less 30% discount
8.1(CE)	-	2400	Less 30% discount
9.1(Tensile test-Strength)	-	5000	Less 30% discount
9.1(Tensile test- Elongation)	-	0	Less 30% discount & Charges of Yield & elongation are included in tensile test charges
9.3(Guided bend test(For SAW Pipes))	-	2500	Less 30% discount
9.2.1(Flattening test for ERW pipes )	-	2500	Less 30% discount
9.3(Guided Bend Test (for SAW Pipes))	-	0	-
11.1, Table 5.(Outside Diameter (OD))	-	2000	Less 30% discount , Dimension Charges
12.3.3(Ovality)	-	1000	Less 30% discount
12.5(Strightness)	-	1000	Less 30% discount
14.1(Visual inspection, Appearance and Workmanship)	-	500	Less 30% discount and Galvanized (mass of Zinc coating = 3000 with 30% Discount) , Joint and End =1000 with 30% discount , Length = 500 with 30% discount
9.1(Tensile test-Yield Strength)	-	0	Less 30% discount & Charges of Yield & elongation are included in tensile test charge
11.1, Table 5.(Mass)	-	2000	Less 30% discount , Dimension & Mass charges

Complete

31 Dec, 2023

Cl 10 Hydraulic pressure test. Scope restricted upto 1200mm.

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

27938 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1000	Charges of LOI for Insulation
5.3(Thickness of Insulation)	-	500	Insulation & sheath
9.1(Ovality)	-	500	Insulation & sheath
10.4(Flammability test- Unaffected portion)	-	750	-
10.4(Flammability test-Burning after flame removal)	-	750	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
10.1(HV (water immersion))	-	2000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	-
table 1 e) 3) (IR constant- max. Temp)	-	1500	-
table 1 e) 3) (IR constant- Room temp )	-	1500	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	1500	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1500	-
10.5(Oxygen index)	-	1000	-
4.2(Conductor resistance test)	-	1000	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1000	Charges of LOI for sheath
10.7(Temperature index)	-	7500	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	4000	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	1000	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	1000	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	0	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
10.6(Halogen evolution)	-	2000	-
10.8(Smoke density rating)	-	1500	-
4.1(Wrapping test (for Al))	-	1000	-
10.11(Persulphate Test )	-	1000	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	1000	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	1000	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	10500	Ageing Test + HV = 3500+7000=10500rs
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	1000	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	1000	-
4.1(Annealing test (for copper))	-	1000	-

Complete

31 Dec, 2023

IS 1251 (1988)

Specification for zinc phosphide, technical

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	30% Discount
2.2 Table 2 ii (Zinc Content)	-	2000	30% Discount
2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve)	-	1000	30% Discount
2.2 Table 2 i (Zinc Phosphide (Zn3P2))	-	5000	30% Discount
2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve)	-	0	-
2.3(Freedom from sulphides)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

26513 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	4000	-
16.4(Flammability Test)	-	1000	-
15.1 d)6)(Heat shock test- Insulation )	-	500	-
15.1 d)6)(Heat shock test- sheath )	-	500	-
16.5(Oxygen Index Test)	-	1000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	500	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	500	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	1000	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	1000	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
15.1 g)(High voltage test at room temperature)	-	2000	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	2000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	2000	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	1000	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	1000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	1500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	1500	-
15.1 d)4)(Hot deformation : Insulation )	-	750	-
15.1 d)4)(Hot deformation : Sheath )	-	750	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1000	-
16.1(Temperature Index)	-	2500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	1500	-
15.1 d)7)(Thermal stability- insulation )	-	1000	-
15.1 d)7)(Thermal stability- Sheath )	-	1000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	1000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1000	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1000	-
16.6(Flame Retardance Test on Single Cables)	-	1500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-

Complete

31 Dec, 2023

Flame retardance on bunched cable, specific optical density of smoke, smoke density (Cl 151.1, C1 & C2 Category)

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Plywood)	-	0	ECO Mark : This is not a laboratory test. Manufacturer has to provide declaration certificate for ECO Mark.
11.1( Squareness Test - IS 4020 (Pt-2))	-	0	-
11.1(Thickness - IS 4020 (Pt-2))	-	0	-
11.1(Width- IS 4020 (Pt-2))	-	0	-
11.1(Height - IS 4020 (Pt-2))	-	0	-
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	0	-
11.3(Depth of deviation - IS 4020(Pt-4))	-	0	-
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	0	-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	0	-
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	0	-
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	0	-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	1500	LESS 30% REBATE
11.8(Buckling Test - IS 4020(Pt-9))	-	1500	LESS 30% REBATE
11.9(Slamming Test - IS 4020(Pt-10))	-	1500	LESS 30% REBATE
11.1(Misuse Test - IS 4020(Pt-11))	-	1500	LESS 30% REBATE
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	5000	LESS 30% REBATE
11.12(End Immersion Test - IS 4020(Pt-13))	-	2000	LESS 30% REBATE
11.13(Knife Test - IS 4020(Pt-14))	-	2000	LESS 30% REBATE
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	2000	LESS 30% REBATE
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	2000	LESS 30% REBATE
Clause 6.1.3(moisture content)	-	1500	LESS 30% REBATE
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	LESS 30% REBATE
9.1(Workmanship & Finish)	-	1000	LESS 30% REBATE , charges of Density = 1000rs & Charges of Preservative treatment = 5000rs
11.1(Dimensions - Height)	-	200	LESS 30% REBATE
11.1(Dimensions - Width)	-	200	LESS 30% REBATE
11.1(Dimensions - Thickness)	-	200	LESS 30% REBATE
11.1(Dimensions - Variation in thickness)	-	200	LESS 30% REBATE
11.1(Dimensions - Squareness)	-	200	LESS 30% REBATE
11.2(General Flatness Test)	-	1000	LESS 30% REBATE
11.3(Local Planeness Test)	-	500	LESS 30% REBATE
11.4(Impact Indentation Test)	-	2000	LESS 30% REBATE
11.5(Flexure Test)	-	2000	LESS 30% REBATE
11.6(Edge Loading Test)	-	1000	LESS 30% REBATE
11.7.1(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-

Complete

31 Dec, 2023

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

24150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	2000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
4.1(Requirement)	-	0	-
5(Materials)	-	10000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
6(Design for Maintenance)	-	500	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
7(Rigidity and Stability)	-	500	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
8(Workmanship and Finish)	-	500	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
9(Gas Taps)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
10(Injector Jets)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
11(Burners)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
12(Burner Pan Supports)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
13.1(Gas Soundness)	-	1500	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
14(Gas Inlet Connections)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
15(Strength and Rigidity)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
16(General Conditions of Test)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
17.1.1(Gas Consumption)	-	2000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
18(Ignition and Flame Travel)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
19(Flame Stability)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
20(Noise Control)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
21(Flash Back)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
22(Formation of Soot)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
23(Resistance to Draught)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
24(Combustion)	-	2000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
25(Fire Hazard and Limiting Temperature)	-	1000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs
26(Thermal Efficiency)	-	2000	Less 30% discount & For Complete Testing (Chemical + Mechanical) = 35000rs , For Only Chemical Test = 7500rs , For Only Mechanical Test = 27500rs

Complete

31 Dec, 2023

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

23366 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	1000	30% Discount
7 Table-3 ii b(Expansion by Autoclave)	-	1000	30% Discount
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	30% Discount
7 Table-3 iii b(Setting Time Final)	-	500	30% Discount
7 Table-3 iii a(Setting Time Initial)	-	500	30% Discount
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	30% Discount
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	30% Discount
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	30% Discount
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	7000	30% Discount
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	30% Discount
6.1 Table-2 iii.(Insoluble residue)	-	1000	30% Discount
6.1 Table-2 iv(Magnesia)	-	2000	30% Discount
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	30% Discount
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	5000	30% discount
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	30% discount

Complete

31 Dec, 2023

IS 455 (2015)

Portland slag cement - Specification

21280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	1000	30% Discount
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	1000	30% Discount
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	1000	30% Discount
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	500	30% Discount
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	1700	30% Discount
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	1650	30% Discount
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	1650	30% Discount
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	2000	30% Discount
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	30% Discount
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	30% Discount
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	5000	30% Discount

Complete

31 Dec, 2023

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

21620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	LESS 30% REBATE
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	LESS 30% REBATE
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	LESS 30% REBATE
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	LESS 30% REBATE
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	LESS 30% REBATE
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	LESS 30% REBATE
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	4000	LESS 30% REBATE
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	2000	LESS 30% REBATE
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	LESS 30% REBATE
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	LESS 30% REBATE
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	5000	Less 30% Rebate

Complete

31 Dec, 2023

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

4300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(General Requirement)	-	500	LESS 30% REBATE
6.3 Table 2 i (Moisture)	-	650	LESS 30% REBATE
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-	650	LESS 30% REBATE
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-	2500	LESS 30% REBATE

Complete

31 Dec, 2023

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2(Description)	-	1000	LESS 30 % DISCOUNT & For Formulation (Clause No. 4.1) = 500 rs with 30 % Discount
Cl.4.3(Size (Mass of tablet))	-	1000	LESS 30 % DISCOUNT
Cl.4.4(Moisture (Annex B))	-	1000	Less 30% Discount
Cl.4.3(Available Chlorine (Annex A))	-	2500	LESS 30 % DISCOUNT
Clause 5(Shelf Life)	-	2500	LESS 30 % DISCOUNT
Cl.4.3(Size (Mass of tablet))	-	0	repeated

Complete

31 Dec, 2023

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

9675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5, Table-1 (i), Grade-1(Total fatty matter, IS 286)	-	2500	30% Discount
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3(Rosin acids, percent by mass of total fatty matter, IS 286 )	-	2500	30% Discount & Charges of Description = 500rs & Charges of cresylic acid = 1500 rs
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3(Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-	950	30% Discount
5.5, Table-1 (iv), Grade-1(Matter insoluble in alcohol, IS 286)	-	1500	30% Discount
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3(Chloride (as sodium chloride), IS 286)	-	1500	30% Discount
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3(Free carbonated alkali)	-	2500	30% Discount
5.5, Table-1 (vii), Grade-1(Lather)	-	650	30% Discount

Complete

31 Dec, 2023

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	30% Discount
3.3.1(Chloropyrifos content)	-	5000	30% Discount
3.2.2(Cold Test)	-	1000	30% Discount
3.2.3(Flash Point (Abel))	-	1000	30% Discount
3.2.4(Emulsion Stability)	-	1000	30% Discount
3.3.2(Acidity (as H2SO4), )	-	1000	30% Discount

Complete

31 Dec, 2023

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

38200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli(or thermotolerant bacteria))	-	900	Rebate 30% Discount
6.1.2(Coliform , bacteria)	-	900	Rebate 30% Discount
6.1.3(Faecal Streptococci )	-	900	Rebate 30% Discount
6.1.3(Staphylococcus Aureus)	-	900	Rebate 30% Discount
6.1.4(Sulphite Reducing Anaerobes )	-	900	Rebate 30% Discount
6.1.5(Pseudomonas Aeruginosa )	-	900	Rebate 30% Discount
6.1.6(Yeast and Mould )	-	900	Rebate 30% Discount
6.1.7(Salmonella )	-	900	Rebate 30% Discount
6.1.7(Shigella)	-	900	Rebate 30% Discount
6.1.8(Vibrio cholera )	-	900	Rebate 30% Discount
6.1.8(Vibrio parahemolyticus)	-	900	Rebate 30% Discount
6.2 Table-1 i(Colour)	-	300	Rebate 30% Discount
6.2 Table-1 ii(Odour)	-	300	Rebate 30% Discount
6.2 Table-1 iii(Taste)	-	300	Rebate 30% Discount
6.2 Table-1 iv(Turbidity)	-	300	Rebate 30% Discount
6.2 Table-1 v(Total dissolved solids)	-	300	Rebate 30% Discount
6.2 Table-1 vi(pH)	-	300	Rebate 30% Discount
6.2 Table-2 i(Nitrate (as NO3))	-	300	Rebate 30% Discount
6.2 Table-2 ii(Nitrite (as NO2))	-	300	Rebate 30% Discount
6.2 Table-2 iii(Sulphide (as H2S))	-	300	Rebate 30% Discount
6.2 Table-2 iv(Manganese (as Mn))	-	300	Rebate 30% Discount
6.2 Table-2 v(Copper (as Cu))	-	300	Rebate 30% Discount
6.2 Table-2 vi(Zinc (as Zn))	-	300	Rebate 30% Discount
6.2 Table-2 viii(Barium (as Ba))	-	300	Rebate 30% Discount
6.2 Table-2 ix(Antimony (as Sb))	-	300	Rebate 30% Discount
6.2 Table-2 x(Borates (as B))	-	300	Rebate 30% Discount
6.2 Table-2 xi(Silver (as Ag))	-	300	Rebate 30% Discount
6.2 Table-2 xii(Chloride (as Cl))	-	200	Rebate 30% Discount
6.2 Table-2 xiii(Sulphate (as SO4),)	-	300	Rebate 30% Discount
6.2 Table-2 xv(Calcium (as Ca))	-	200	Rebate 30% Discount
6.2 Table-2 xvi(Sodium (as Na))	-	300	Rebate 30% Discount
6.2 Table-2 xvii(Alkalinity (as HCO3))	-	200	Rebate 30% Discount
6.2 Table-2 vii(Flouride (as F))	-	300	Rebate 30% Discount
6.2 Table-2 xviii(Selenium (as Se))	-	300	Rebate 30% Discount
6.2 Table-2 xx(Phenolic compounds (as C6H5OH))	-	300	Rebate 30% Discount
6.2 Table-2 xxi(Anionic surface active agents (as MBAS))	-	300	Rebate 30% Discount
6.2 Table-3 i(Arsenic (as As))	-	300	Rebate 30% Discount
6.2 Table-3 ii(Cadmium (as Cd))	-	300	Rebate 30% Discount
6.2 Table-3 iii(Cyanide (as CN))	-	300	Rebate 30% Discount
6.2 Table-3 iv(Chromium (as Cr))	-	300	Rebate 30% Discount
6.2 Table-3 v(Mercury (as Hg))	-	300	Rebate 30% Discount
6.2 Table-3 vi(Lead (as Pb)	-	300	Rebate 30% Discount
6.2 Table-3 vii(Nickel (as Ni))	-	300	Rebate 30% Discount
6.2 Table-3 viii(Polychlorinated biphenyle (PCB))	-	3000	Rebate 30% Discount
6.2 Table-3 ix(Polynuclear aromatic hydrocarbons)	-	3000	Rebate 30% Discount
6.2 Table-4 i (Alpha emitters)	-	3000	Rebate 30% Discount
6.2 Table-4 iI (Beta emitters)	-	3000	Rebate 30% Discount
6.3(o,p DDT)	-	200	Rebate 30% Discount
6.3(p,p DDT)	-	200	Rebate 30% Discount
6.3(o,p DDE)	-	200	Rebate 30% Discount
6.3(p, DDE)	-	200	Rebate 30% Discount
6.3(o,p DDD)	-	200	Rebate 30% Discount
6.3(p,p DDD)	-	200	Rebate 30% Discount
6.3(γ-HCH (Lindane))	-	200	Rebate 30% Discount
6.3(α-HCH)	-	200	Rebate 30% Discount
6.3(β-HCH)	-	200	Rebate 30% Discount
6.3(δ-HCH)	-	200	Rebate 30% Discount
6.3(α Endosulfan)	-	200	Rebate 30% Discount
6.3(β Endosulfan)	-	200	Rebate 30% Discount
6.3(Endosulfan Sulphate)	-	200	Rebate 30% Discount
6.3(Monocrotophos)	-	200	Rebate 30% Discount
6.3(Ethion)	-	200	Rebate 30% Discount
6.3(Chlorpyrifos)	-	200	Rebate 30% Discount
6.3(Phorate)	-	200	Rebate 30% Discount
6.3(Phorate sulphoxide)	-	200	Rebate 30% Discount
6.3(phorate sulphone)	-	200	Rebate 30% Discount
6.3(2,4-D)	-	200	Rebate 30% Discount
6.3(Butachlor)	-	200	Rebate 30% Discount
6.3(Isoproturon)	-	200	Rebate 30% Discount
6.3(Alachlor)	-	200	Rebate 30% Discount
6.3(Atrazine)	-	200	Rebate 30% Discount
6.3(Methyl Parathion)	-	200	Rebate 30% Discount
6.3(Methyl Paraoxon)	-	200	Rebate 30% Discount
6.3(Malathion)	-	200	Rebate 30% Discount
6.3(Malaoxon)	-	200	Rebate 30% Discount
6.3(Aldrin)	-	200	Rebate 30% Discount
6.3(Dieldrin)	-	200	Rebate 30% Discount
Table 3, x)(Uranium)	-	300	Rebate 30% Discount
6.2 Table-2 xiv(Magnesium (as Mg))	-	200	Rebate 30% Discount
6.2 Table-2 xix(Mineral Oil)	-	400	Rebate 30% Discount
6.1.1(Escherichia coli)	-	900	Less 30% Discount
6.1.2(Coliform)	-	900	Less 30% Discount
6.1.3(Faecal Streptococci)	-	1800	Less 30% Discount , Faecal Streptococci = 900rs , Staphylococcus aureus =900rs
6.1.4(Sulphite Reducing Anaerobe)	-	900	Less 30% Discount
6.1.5(Pseudomonas aeruginosa)	-	900	Less 30% Discount
6.1.6(Yeast and moould)	-	900	Less 30% Discount
6.1.7(Salmonella)	-	1800	Less 30% Discount ,Salmonella = 900 , Shigella = 900
6.1.8(Vibrio Cholera)	-	1800	Less 30% Discount , Vibrio cholera = 900rs , Parahaemolyticus = 900rs
6.2/Table 1/i(Colour)	-	300	Less 30% Discount
6.2/Table 1/ii(Odour)	-	300	Less 30% Discount
6.2/Table 1/iii(Taste)	-	300	Less 30% Discount
6.2/Table 1/iv(Turbidity)	-	300	Less 30% Discount
6.2/Table 1/v(Total Dissoved)	-	300	Less 30% Discount
6.2/Table 1/vi(pH Value)	-	300	Less 30% Discount
6.2/Table 2/i(Nitrate)	-	300	Less 30% Discount
6.2/Table 2/ii(Nitrite)	-	300	Less 30% Discount
6.2/Table 2/iii(Sulphide)	-	300	Less 30% Discount
6.2/Table 2/iv(Manganese)	-	300	Less 30% Discount
6.2/Table 2/v(Copper)	-	300	Less 30% Discount
6.2/Table 2/vii(Barium)	-	300	Less 30% Discount
6.2/Table 2/viii(Antimony)	-	300	Less 30% Discount
6.2/Table 2/ix(Borate)	-	300	Less 30% Discount
6.2/Table 2/x(Silver)	-	300	Less 30% Discount
6.2/Table 2/xi(Chloride)	-	200	Less 30% Discount
6.2/Table 2/xii(Sulphate)	-	300	Less 30% Discount
6.2/Table 2/xiv(Calcium)	-	200	Less 30% Discount
6.2/Table 2/xv(Sodium)	-	300	Less 30% Discount
6.2/Table 2/xvi(Alkalinity)	-	200	Less 30% Discount
6.2/Table 2/vi(Fluoride)	-	300	Less 30% Discount
6.2/Table 2/xvii(Selenium)	-	300	Less 30% Discount
6.2/Table 2/xix(Phenolic Compounds)	-	300	Less 30% Discount
6.2/Table 2/xx(Anionic Surface active agents)	-	300	Less 30% Discount
6.2/Table 3/i(Arsenic)	-	300	Less 30% Discount
6.2/Table 3/ii(Cadmium)	-	300	Less 30% Discount
6.2/Table 3/iii(Cyanide)	-	300	Less 30% Discount
6.2/Table 3/iv(Chromium)	-	300	Less 30% Discount
6.2/Table 3/v(Mercury)	-	300	Less 30% Discount
6.2/Table 3/vi(Lead)	-	300	Less 30% Discount
6.2/Table 3/vii(Nickel)	-	300	Less 30% Discount
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	3000	Less 30% Discount
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	3000	Less 30% Discount
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	3000	Less 30% Discount
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	3000	Less 30% Discount
Cl- 6.3, Annex N (i)(P,P -DDE)	-	220	Less 30% Discount
Cl- 6.3, Annex N (i)(O,P -DDE)	-	220	Less 30% Discount
Cl-6.3, Annex N (i)(P,P- DDD)	-	220	Less 30% Discount
Cl-6.3, Annex N (i)(O,P-DDD)	-	220	Less 30% Discount
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	220	Less 30% Discount
Cl- 6.3, Annex N (iii)(α-HCH)	-	220	Less 30% Discount
Cl- 6.3, Annex N (iii)(β-HCH)	-	220	Less 30% Discount
Cl- 6.3, Annex N (iii)(δ - HCH)	-	220	Less 30% Discount
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	220	Less 30% Discount
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	220	Less 30% Discount
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	220	Less 30% Discount
Cl- 6.3, Annex N (v)(Monocrotophos)	-	220	Less 30% Discount
Cl- 6.3, Annex N (vi)(Ethion)	-	220	Less 30% Discount
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	220	Less 30% Discount
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	220	Less 30% Discount
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	220	Less 30% Discount
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	220	Less 30% Discount
Cl- 6.3, Annex N (ix)(2,4-D)	-	220	Less 30% Discount
Cl- 6.3, Annex N (x)(Butachlor)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xi)(Isoproturon)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xii)(Alachlor)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xiii)(Atrazine)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xv)(Malathion)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xv)(malaoxon)	-	220	Less 30% Discount
Cl- 6.3, Annex N (xvi)(Aldrin)	-	220	Less 30% Discount
6.2/Table 3/x(Uranium)	-	300	Less 30% Discount
6.2/Table 2/xiii(Magnesium)	-	200	Less 30% Discount
6.2/Table 2/xviii(Mineral Oil)	-	400	Less 30% Discount

Complete

31 Dec, 2023

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

13380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 AND AS PER IS 7887(CARBON)	-	3000	30% Discount
6 AND AS PER IS 7887(SULPHUR)	-	3000	30% Discount
6 AND AS PER IS 7887(PHOSPHORUS)	-	3000	30% Discount
6 AND AS PER IS 7887(MANGANESE)	-	3000	30% Discount
7 & 8(Diameter)	-	1500	30% Discount
Cl 9(Tensile Test On UTM)	-	5000	30% Discount
9.2(Wrapping Test)	-	2500	30% Discount
9.3(Bend test)	-	2500	30% Discount
10(Finish)	-	500	30% Discount
11(Coating test)	-	3000	30% Discount
13(Freedom from defects)	-	500	30% Discount

Complete

31 Dec, 2023

Cl 9.2 Wrapping test. Scope restricted to 5 mm and above only.

IS 3097 (2006)

Veneered Particle Boards -Specification

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Preservative Treatment of Veneers)	-	0	0
Clause No - 7(Dimensional Tolerance)	-	1000	30% Discount , Charges of Veneer thk. = 1000rs
Clause No - 9.1 (a(Determination of density)	-	1500	30% Discount
Clause No - 9.1 (b(Determination of moisture content)	-	1500	30% Discount
Clause No - 9.1 (c(Water absorption)	-	3000	30% Discount
Clause 9.1 d) Water Resistance test(Clause 9.1 d) Water Resistance test)	-	3500	30% Discount
Clause No - 9.1 (e) (1(Determination of swelling in water - Swelling due to general absorption)	-	1500	30% Discount
9.1 f)Adhesion of plies(9.1 f)Adhesion of plies)	-	3000	30% Discount
Clause No - 9.1 (g)("Modulus of rupture (MOR) and modulus of elasticity (MOE) ")	-	5000	30% Discount
Clause No - 9.1 (h)("Determination of deflection under sustained load (long time loading test)")	-	4000	30% Discount
Clause No - 9.1 (e) (2(Determination of swelling in water -Swelling due to surface absorption)	-	1500	Less 30% Discount

Complete

31 Dec, 2023

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

9868670895 laxmirawat@shriraminstitute.org

Scope List