BIS - LIMS (Laboratory Information Management System)

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

9868670895 laxmirawat@shriraminstitute.org

Scope List

Reset

85 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 9356 (1980)

Specification for butachlor emulsifiable concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	30% Discount
2.3.1(Butachlor Content, NV upto 9)	-	5000	30% Discount
2.2.2(Cold Test)	-	1000	30% Discount
2.2.3(Flash Point)	-	1000	30% Discount
2.2.4(Emulsion Stability)	-	1000	30% Discount
2.3.2(Acidity)	-	1000	30% Discount

31 Dec, 2026

-
-

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	2500	-
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	2500	-
13(External Influences, IS 9537-2)	-	3500	-
8.2(Construction, IS 9537-2)	-	2000	-
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	500	-
7.1(Dimensions)	-	2000	-

31 Dec, 2026

-
-

IS 9665 (1981)

Specification for propoxur emulsifiable concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	LESS 30% DISCOUNT
2.3.2(Acidity)	-	1000	LESS 30% DISCOUNT
2.2.2(Cold Test)	-	1000	LESS 30% DISCOUNT
2.2.3(Flash Point)	-	1000	LESS 30% DISCOUNT
2.2.4(Emulsion Stability)	-	1000	LESS 30% DISCOUNT
2.3.1(Propoxur Content, NV above 9 and below 50)	-	5000	LESS 30% DISCOUNT

31 Dec, 2026

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

12569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.1.1 Table-2(Length of Socket end)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.2(Minimum inside diameter of conduit)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.3(Length of conduit)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1500	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	5000	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	-
10(Resistance to Heat -Ball presure test)	-	1500	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	5000	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	5000	-

31 Dec, 2026

-
-

IS 3903 (1984)

Specification for dimethoate emulsifiable concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	Less 30% Discount
2.3.2(Acidity)	-	1000	Less 30% Discount
2.2.2(Cold Test)	-	1000	Less 30% Discount
2.2.3(Flash Point)	-	1000	Less 30% Discount
2.2.4(emulsion Stability)	-	1000	Less 30% Discount
2.3.1(Dimethoate Content, NV above 9 and below 50)	-	5000	Less 30% Discount

31 Dec, 2026

-
-

IS 11997 (1987)

Specification for fbnvaleratb AC

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	LESS 30% DISCOUNT
2.3.1(Fenvelarte content)	-	5000	LESS 30% DISCOUNT
2.2.2(Cold Test)	-	1000	LESS 30% DISCOUNT
2.2.3(Flash Point (Abel))	-	1000	LESS 30% DISCOUNT
2.2.4(Emulsion Stability)	-	1000	LESS 30% DISCOUNT
2.3.2(Acidity/Alkalinity)	-	1000	LESS 30% DISCOUNT

31 Dec, 2026

-
-

IS 12016 (1987)

Specification for cypermethrin EC

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	less 30% Discount
2.3.1(Cypermethrin content)	-	5000	less 30% Discount
2.2.2(Cold Test)	-	1000	less 30% Discount
2.3.2(Acidity)	-	1000	less 30% Discount
2.2.3(Flash Point (Abel))	-	1000	less 30% Discount
2.2.4(Emulsion Stability)	-	1000	less 30% Discount

31 Dec, 2026

-
-

IS 702 (2022)

SPECIFICATION FOR INDUSTRIAL BITUMEN

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 and 6.1 Table 1(Flash point, Cleavland open cup)	-	1500	LESS 30% REBATE
5.1 and 6.1 Table 1(Specific Gravity, 85/25)	-	1500	LESS 30% REBATE
5.1 and 6.1 Table 1(Softneing Point 85/25)	-	2000	LESS 30% REBATE
5.1 and 6.1 Table 1(Penetration at 25C 85/25)	-	2000	LESS 30% REBATE
5.1 and 6.1 Table 1(loss on heating)	-	1500	LESS 30% REBATE
5.1 and 6.1 Table 1(Penetration of residue at 25C)	-	3000	LESS 30% REBATE
5.1 and 6.1 Table 1(Matter Soluble in trichloroethylene)	-	1500	LESS 30% REBATE
5.1 & 6.1, Table 1, S.No.6(Ductility test)	-	2000	LESS 30% REBATE
6-Table 1-i)(Specific gravity at 27 °C)	-	0	-
6-Table 1-iii)(Softening point, °C)	-	0	-
6-Table 1-ii)(Flash point, Cleveland open cup, °C, Min)	-	0	-
6-Table 1-iv)(Penetration at 25 °C, 100g, 5 sec, 1/10 mm)	-	0	-
6-Table 1-v)(a) Loss on heating, percent by mass, Min b) Penetration of the residue at 25 °C, 100g, 5 s, percent of original, Min)	-	0	-
6-Table 1-vi)(Ductility at 27 °C, cm, Min)	-	0	-
6-Table 1-vii)(Matter soluble in trichloroethylene, percent by mass, Min)	-	0	-

31 Dec, 2026

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

30525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 a) i)(Annealing Test ( For copper wire ) )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 e) v) (Sheath : Hot deformation)	-	1500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2500	-
15.1 e) vi) (Sheath : Heat shock test)	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	3000	Charges of Shrinkage (Sheath & Insulation) are same that is Rs=3000/-
15.1 e) vii) (Sheath : Thermalstability)	-	2000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	2000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	3000	Charges of Tensile Strength & Elongation are same that is Rs=3000/-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	3000	Charges of Tensile Strength & Elongation are same that is Rs=3000/-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	3000	Charges of Shrinkage (Sheath & Insulation) are same that is Rs=3000/-
9.2(Thickness of Insulation - Average)	-	3000	-
9.3(Thickness of Insulation - Minimum)	-	3000	-
12.3(Thickness of Inner Sheath)	-	3000	-
14.3(Thickness of outer sheath - minimum)	-	3000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	3000	Charges of Flammability test for (Period of burning & unaffected length) are same i.e Rs=3000/-
16.3(FLAMMABILITY TEST : Unaffected length )	-	3000	Charges of Flammability test for (Period of burning & unaffected length) are same i.e Rs=3000/-
16.9(Oxygen Index Test)	-	2500	-
16.2(HIGH VOLTAGE TEST )	-	2500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	-
13.3(Armouring : Dimensions -Formed wire )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	-
13.6 g)(ARMOURING: Resistivity)	-	2500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1500	-
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	10000	-
16.13(Test for Halogen Acid Gas Evolution)	-	5000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 a) iv)(Resistance test - Main conductor)	-	2000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	2000	-
16.14(Temperature Index)	-	7500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1500	Charges of Tensile test for Al (Before Stranding & After Stranding) are same i.e Rs=1500/-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1500	Charges of Tensile test for Al (Before Stranding & After Stranding) are same i.e Rs=1500/-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	3000	Charges of Tensile strength & Elongation for (Insulation) are same that is Rs=3000/-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	3000	Charges of Tensile strength & Elongation for (Insulation) are same that is Rs=3000/-
Cl 16(Halogen Acid Gas Test)	-	0	repeated parameter
Table 2(Cold bend test for Outer sheath)	-	2000	-
Table 2(Cold Impact test for Outer sheath)	-	2000	-
16.1(Flame Retardance Test on Single Cables)	-	2500	-
13.6 b)(ARMOURING: Elongation )	-	1500	-

31 Dec, 2026

-
Flame retardance on bunched cable, specific optical density of smoke, smoke density (Cl 151.1, C1 & C2 Category)

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Fineness 4031 Part 2)	-	1000	LESS 30% REBATE
5.3 a)(Setting Time Initial- 4031 Part 5)	-	500	LESS 30% REBATE
5.3 b)(Setting Time Final- 4031 Part 5)	-	500	LESS 30% REBATE
5.5 i)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
5.5 ii)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
5.5 iii)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	LESS 30% REBATE
4.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	7000	LESS 30% REBATE
4.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	2000	LESS 30% REBATE
4.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1000	LESS 30% REBATE
4.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1000	LESS 30% REBATE
4.1 - Table - 1 vii(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	LESS 30% REBATE
5.2.1(Expansion by Autoclave- 4031 Part 3)	-	1000	LESS 30% REBATE
5.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1000	LESS 30% REBATE

31 Dec, 2026

-
-

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Description)	-	500	LESS 30 % DISCOUNT
5.3 Table-1 i(Available chlorine)	-	2500	LESS 30 % DISCOUNT
5.3 Table-1 ii(Stability, loss of Chlorine on the basis of initial available chlorine )	-	5000	LESS 30 % DISCOUNT
Clause 5.3 Table 1(Moisture)	-	1000	LESS 30 % DISCOUNT
Clause 5.3 Table 1(Particle size)	-	1000	LESS 30 % DISCOUNT
Clause 5.4(Keeping Quality )	-	5000	LESS 30 % DISCOUNT

31 Dec, 2026

-
-

IS 1488 (1989)

Pesticides - 2, 4 - D sodium salt, technical - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	1000	30% Discount
3.2.3 & 7.1 Table i(Acid content. ( calculated as 2, 4-dichlorophenoxy acetic acid. 2, 4.D))	-	5000	30% Discount
3.2.3 & 7.1 Table ii(Water insoluble matter)	-	1000	30% Discount
3.2.3 & 7.1 Table iii(Free phenol Content (expressed as 2, 4-dichloropbenol of the declared acid content))	-	1000	30% Discount
3.2.3 & 7.1 Table iv(Melting point of the extracted acid)	-	1000	30% Discount
3.2.3 & 7.1 Table v(Loss on drying at 105°C)	-	1000	30% Discount

31 Dec, 2026

-
-

IS 12751 (1989)

Pesticides - Pendimethalin EC - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	LESS 30% DISCOUNT
3.3.1(Pendimethalin content)	-	5000	LESS 30% DISCOUNT
3.2.2(Cold Test)	-	1000	LESS 30% DISCOUNT
3.2.3(Flash Point (Abel))	-	1000	LESS 30% DISCOUNT
3.2.4(Emulsion Stability)	-	1000	LESS 30% DISCOUNT
3.4(Acidity/Alkalinity)	-	1000	LESS 30% DISCOUNT

31 Dec, 2026

-
-

IS 8074 (1990)

Monocrotophossl - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	30% Discount
3.3.1(Monocrotophos Content)	-	5000	30% Discount
3.3.2(Free Aceto-Acetic Acid Monomethyl-amide ( MMA ) Content)	-	1000	30% Discount
3.3.3(Acidit)	-	1000	30% Discount
3.2.2(Cold Test)	-	1000	30% Discount
3.2.3(Flash Point ( Abel ))	-	1000	30% Discount

31 Dec, 2026

-
-

IS 8446 (1991)

Pesticide - Carbendazim (MBC) WP - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	1000	30% Discount
3.3 table 1(Material passing through 75 micron IS sieve)	-	1000	30% Discount
3.3 table 1(suspensibility)	-	2000	30% Discount
3.3 table 1(Acidity (as H2SO4), or Alkalinity (as NaOH) )	-	1000	30% Discount
3.3 table 1(Carbendazim ( MBC ) content, percent by mass)	-	5000	30% Discount

31 Dec, 2026

-
-

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

9017 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 51000-A)(Chromium)	-	1200	30% Discount
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	1200	30% Discount
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress)	-	0	Charges of Elongation and 0.2% proof stress are included in Tensile strength Charges.
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength)	-	5000	30% Discount
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	0	Charges of Elongation and 0.2% proof stress are included in Tensile strength Charges.
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend))	-	2500	30% Discount

31 Dec, 2026

-
-

IS 5346 (1994)

Synthetic food colour - Preparations and mixtures - Specification (Second Revision)

6950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.5(Total dye Content)	-	3000	LESS 30% REBATE
Clause 4.6 Table 1(Water InsoIuble matter,)	-	950	LESS 30% REBATE
Clause 4.6 Table 1(Lead (as pb) )	-	1000	LESS 30% REBATE
Clause 4.6 Table 1(Arsenic(as As))	-	1000	LESS 30% REBATE
Clause 4.6 Table 1(Heavy metals)	-	1000	LESS 30% REBATE

31 Dec, 2026

-
-

IS 14158 (1994)

Cyfluthrin WP - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	1000	LESS 30% DISCOUNT
3.3 Table 1 i(Cyfluthrin content )	-	4000	LESS 30% DISCOUNT
3.3 Table 1 ii(Sieving requirements material passing through 75 micron IS sieve)	-	1000	LESS 30% DISCOUNT
3.3 Table 1 v(Wettability)	-	1000	LESS 30% DISCOUNT
3.3 Table 1 iii(Suspensibility)	-	2000	LESS 30% DISCOUNT
3.3 Table 1 iv(Acidity/Alkalinity)	-	1000	LESS 30% DISCOUNT

31 Dec, 2026

-
-

IS 14183 (1994)

Pesticide - Cartap hydrochloride SP - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	1000	Less 30% Discount
3.3 Table 1 i(Cartap Hydrochloride Content)	-	5000	Less 30% Discount
3.3 Table 1 ii(Matter insoluble in water )	-	2000	Less 30% Discount
3.3 Table 1 iii(pH or 10 percent ( mlm ) extract)	-	2000	Less 30% Discount

31 Dec, 2026

-
-

IS 14309 (1995)

Blended edible vegetable oils specification

10409 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Acid value, mx type2)	-	650	30% Discount , Charges of Description = 1500 rs , Permitted antioxidants = 5000 rs , Clarity at 35 degree celcius for 24h = 650 rs , admixture with other oils and adulterants = 5850 rs
Table-1(Flash point, Pen&y-Martens ,type 2)	-	950	30% Discount
Table-1(Unsaponifiable matter, percent by mass, MaX type1)	-	950	less 30% discount
Table-1(Acid value, mx type 1)	-	650	less 30% discount
Table-1(Unsaponifiable matter, percent by mass, MaX type2)	-	950	30% Discount
Table-1(Flash point, Pen&y-Martens type1)	-	950	less 30% discount
Table-1(Moisture and volatile matter percent by mass, Max type1)	-	650	30% Discount

31 Dec, 2026

-
-

IS 1328 (1996)

Veneered Decorative Plywood -Specification

7275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1500	LESS 30% REBATE
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	3500	LESS 30% REBATE
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	330	LESS 30% REBATE
8(Dimensions & Tolerances - Length - Cl. 8)	-	200	LESS 30% REBATE
8(Dimensions & Tolerances - Width - Cl. 8)	-	200	LESS 30% REBATE
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	200	LESS 30% REBATE
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	200	LESS 30% REBATE
8(Dimensions & Tolerances - Squareness - Annexure C)	-	200	LESS 30% REBATE
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	330	LESS 30% REBATE
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	330	LESS 30% REBATE
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	330	LESS 30% REBATE
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	330	LESS 30% REBATE
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	330	LESS 30% REBATE
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	3500	LESS 30% REBATE

31 Dec, 2026

-
-

IS 4467 (1996)

Caramel - Specification (Second Revision)

12950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Description)	-	500	30% DISCOUNT
6.1.2 Table 1(Colour Intensity, Type 3 ammonia process)	-	1500	30% DISCOUNT
6.1.2 Table 1(solid Content, Type 3 ammonia process)	-	650	30% DISCOUNT
6.1.2 Table 1(Ammoniacal Nitrogen, Type 3 ammonia process)	-	950	30% DISCOUNT
6.1.2 Table 1(4-Methylimidazole, Type 3 ammonia process)	-	1500	30% DISCOUNT
6.1.2 Table 1(Lead ( as Pb), all types)	-	1000	30% DISCOUNT
6.1.2 Table 1(Arsenic, all types)	-	1000	30% DISCOUNT
6.2.1 Table 2(Total Sulphur, Type 3 ammonia process)	-	950	30% DISCOUNT
6.2.1 Table 2(Sulphur dioxide, Type 4 sulphite ammonia)	-	950	30% DISCOUNT
6.2.1 Table 2(Total Nitrogen, Type 3 ammonia process)	-	950	30% DISCOUNT
6.2.1 Table 2(Mercury, all types)	-	1000	30% DISCOUNT
6.2.1 Table 2(Copper,all types)	-	1000	30% DISCOUNT
6.2.1 Table 2(Heavy Metals, all types)	-	1000	30% DISCOUNT

31 Dec, 2026

-
-

IS 14510 (1997)

Lambda - Cyhalothrin WP - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	1000	Less 30% Discount
3.3 Table 1 i(Lamda cyhalothrin content )	-	4000	Less 30% Discount
3.3 Table 1 ii(Sieving requirements material passing through 75 micron IS sieve)	-	1000	Less 30% Discount
3.3 Table 1 iii(Suspensibility)	-	2000	Less 30% Discount
3.3 Table 1 iv(Wettability)	-	1000	Less 30% Discount
3.3 Table 1 v(Acidity/Alkalinity)	-	1000	Less 30% Discount

31 Dec, 2026

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

40600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Visual Appearance)	-	1000	30% Discount
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	1500	30% Discount
7.4.1.2(Ovality)	-	0	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	15000	30% Discount
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	7500	30% Discount
8.2(Longitudinal Reversion Test)	-	2500	30% Discount
Cl. 8.3(Carbon Black Content)	-	1500	30% Discount
Cl. 8.3(Carbon Black Dispersion)	-	1500	30% Discount
8.4( Melt Flow Rate)	-	2500	30% Discount
8.5 (Oxidation Induction Time)	-	4000	30% Discount
Clause 8.6(Overall migration (stimulate))	-	2500	30% Discount
Clause 8.6(Overall migration (surface of material))	-	0	-
8.7(Density)	-	1000	30% Discount
8.8(Tensile Strength for Butt-fusion)	-	2000	30% Discount
8.9 table-6(Elongation at Break)	-	0	-
8.10(Slow Crack Growth Rate)	-	5000	30% Discount
5, 5.1 table-1(MATERIALS)	-	1000	30% Discount
5.2(Polyethylene Resin)	-	2500	30% Discount
5.3 (a)(Carbon Black Master Batch)	-	0	-
5.3(c)(Carbon Black Master Batch)	-	0	-
5.3(d)(Carbon Black Master Batch)	-	0	-
5.3(e)(Carbon Black Master Batch)	-	0	-
6, 6.1(PIPE DESCRIPTION)	-	1000	30% Discount
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
6, 6.1.2(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.2(Colour)	-	1000	30% Discount
6.2.1(6.1.1 Identification Stripes)	-	1000	30% Discount
8.6(Overall migration)	-	0	-
8.3(Carbon black)	-	0	-
7()	-	0	-
5.2(Density)	-	0	-
5.2(MFI @ 1900C/5.0 Kg)	-	2500	30% Discount
5.2(Volatile matter Content)	-	1500	30% Discount
5.3(Toluene Extract)	-	0	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
7.1(Visual Appearance)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
Cl. 8.3(Carbon Black Dispersion)	-	0	-
Clause 8.6(Overall migration (stimulate))	-	0	-
Clause 8.6(Overall migration (surface of material))	-	0	-
8.10(Slow Crack Growth Rate)	-	0	-
7()	-	0	-
5.2(Density)	-	0	-
5.2(MFI @ 1900C/5.0 Kg)	-	0	-
5.2(Volatile matter Content)	-	0	-
5.3(Toluene Extract)	-	0	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
7.1(Visual Appearance)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
Cl. 8.3(Carbon Black Dispersion)	-	0	-
Clause 8.6(Overall migration (stimulate))	-	0	-
Clause 8.6(Overall migration (surface of material))	-	0	-
8.10(Slow Crack Growth Rate)	-	0	-
7()	-	0	-
5.2(Density)	-	0	-
5.2(MFI @ 1900C/5.0 Kg)	-	0	-
5.2(Volatile matter Content)	-	0	-
5.3(Toluene Extract)	-	0	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
7.2(Length)	-	0	-
7.3(Coiling)	-	0	-
Clause 7.3(Coiling)	-	0	-

31 Dec, 2026

-
Included w.e.f 23.12.2024 Exclusion : Cl 5.3(b) (Carbon Black Master Batch), Cl 5.4 (Anti oxydent)

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

32800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	200	30% Discount
Cl-5.3, Table-1 (ii)(Odour)	-	200	30% Discount
Cl-5.3, Table-1 (iii)(Taste)	-	300	30% Discount
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	300	30% Discount
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	300	30% Discount
Cl-5.3, Table-1 (vi)(pH)	-	300	30% Discount
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	300	30% Discount
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	300	30% Discount
Cl-5.3, Table-2 (xxii)(Sulphide)	-	300	30% Discount
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	300	30% Discount
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	300	30% Discount
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	300	30% Discount
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	300	30% Discount
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	300	30% Discount
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	300	30% Discount
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	300	30% Discount
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	300	30% Discount
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	300	30% Discount
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	300	30% Discount
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	200	30% Discount
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	300	30% Discount
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	200	30% Discount
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	30% Discount
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	300	30% Discount
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	30% Discount
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	200	30% Discount
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	300	30% Discount
Cl-5.3, Table-2 (xx)(Mineral oil)	-	300	30% Discount
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	30% Discount
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	300	30% Discount
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	300	30% Discount
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	300	30% Discount
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	300	30% Discount
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	300	30% Discount
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	300	30% Discount
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	300	30% Discount
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	300	30% Discount
Cl-5.3, Table-3 (x)(Uranium)	-	300	30% Discount
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	3000	30% Discount
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	3000	30% Discount
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	3000	30% Discount
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	3000	30% Discount
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	900	30% Discount
Cl-5.2.3(Staphylococcus aureus)	-	900	30% Discount
Cl-5.2.2(Coliform)	-	900	30% Discount
Cl-5.2.3(Faecal streptococci)	-	900	30% Discount
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	900	30% Discount
Cl-5.2.5(Pseudomonas Aeruginosa)	-	900	30% Discount
Cl-5.2.8(Salmonella)	-	900	30% Discount
Cl-5.2.8(shigella)	-	900	30% Discount
Cl-5.2.7(Yeast and mould)	-	900	30% Discount
Cl-5.2.9(Vibrio cholera)	-	900	30% Discount
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	400	30% Discount
Cl-5.2.9(V.parahaemolyticus)	-	900	30% Discount
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
Cl-5.1(General Requirements)	-	0	-
5.3(Appearance)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	200	30% Discount
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	500	30% discount
5.4 i)(Dieldrin)	-	200	30% Discount
5.4 i)(Aldrin)	-	200	30% Discount
5.4 i)(Malathion)	-	200	30% Discount
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	200	30% Discount
5.4 i)(Methyl Paraoxon)	-	200	30% Discount
5.4 i)(Methyl Parathion)	-	200	30% Discount
5.4 i)(Atrazine)	-	200	30% Discount
5.4 i)(Alachlor)	-	200	30% Discount
5.4 i)(Isoproturon)	-	200	30% Discount
5.4 i)(Butachlor)	-	200	30% Discount
5.4 i)(2,4-D)	-	200	30% Discount
5.4 i)(Phorate sulphone)	-	200	30% Discount
5.4 i)(Phorate sulphoxide)	-	200	30% Discount
5.4 i)(Phorate)	-	200	30% Discount
5.4 i)(Chlorpyrifos)	-	200	30% Discount
5.4 i)(Ethion)	-	200	30% Discount
5.4 i)(Monocrotophos)	-	200	30% Discount
5.4 i)(Endosulfan Sulphate)	-	200	30% Discount
5.4 i)(beta-Endosulfan)	-	200	30% Discount
5.4 i)(alpha-Endosulfan)	-	200	30% Discount
5.4 i)(Delta-HCH)	-	200	30% Discount
5.4 i)(beta-HCH)	-	200	30% Discount
5.4 i)(alpha-HCH)	-	200	30% Discount
5.4 i)(Gamma-HCH (Lindane))	-	200	30% Discount
5.4 i)(p,p DDD)	-	200	30% Discount
5.4 i)(o,p DDD)	-	200	30% Discount
5.4 i)(p,p DDE)	-	200	30% Discount
5.4, i)(o,p DDE)	-	200	30% Discount
5.4 i)(p,p DDT)	-	200	30% Discount
5.4 i)(o,p DDT)	-	200	30% Discount
Table 3, x)(Uranium)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	0	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
Cl-5.1(General Requirements)	-	0	-
5.3(Appearance)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	0	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
Cl-5.1(General Requirements)	-	0	-
5.3(Appearance)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	30% Discount

31 Dec, 2026

-
included.w.e.f.26.12.2024

Bureau of Indian Standards

The National Standards Body of India

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

9868670895 laxmirawat@shriraminstitute.org

Scope List