BIS - LIMS (Laboratory Information Management System)

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

9868670895 laxmirawat@shriraminstitute.org

Scope List

Reset

72 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 8708 (2006)

Mancozeb wettable powder - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	30% Discount
3.3.1(Mancozeb Content)	-	4000	30% Discount
3.2.2(Sieving Requirement)	-	1000	30% Discount
3.2.3(Suspensibility)	-	1000	30% Discount
3.2.4(Wettability)	-	1000	30% Discount
3.3.2(Zinc Content)	-	1000	30% Discount
3.3.3(Manganese Content)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 6047 (2009)

Scouring products for utensil cleaning - Specification (First Revision)

12850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2, Table-1,(i)(Retention on 250 microne IS sieve)	-	650	LESS 30% REBATE
Cl.4.2, Table-1,(ii)(Active matter)	-	1500	LESS 30% REBATE
Cl.4.2, Table-1,(iii)(Active (reverse) alkalinity)	-	950	LESS 30% REBATE
Cl.4.2, Table-1,(iv)(Matter insoluble in alcohol)	-	950	LESS 30% REBATE
Cl.4.2, Table-1,(v)(Moisture and volatile Matter content at 105 degree C)	-	650	LESS 30% REBATE
Cl.4.2, Table-1,(vi)(Lather)	-	650	LESS 30% REBATE
Cl.4.2, Table-1,(vii)(Cleansing efficacy)	-	2500	LESS 30% REBATE
Cl.4.2, Table-1,(viii)(Tough soil cleaning)	-	2500	LESS 30% REBATE
Cl.4.2, Table-1,(ix)(Surface damage)	-	2500	LESS 30% REBATE

Complete

31 Dec, 2023

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

13675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	30% Discount
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	30% Discount
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	30% Discount
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	30% Discount
9( FREEDOM FROM DEFECTS)	-	500	30% Discount
10.1.a)( Macro examination IS 11371)	-	2500	30% Discount
10.1.b)( Sulphur print tests IS 12037)	-	3500	30% Discount
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
11(Dimensions)	-	1000	30% Discount
10.2(Bend)	-	2500	30% Discount
10.3(Chamber)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

26500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	2000	30% DISCOUNT
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2500	30% DISCOUNT
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2000	30% DISCOUNT
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3000	30% DISCOUNT
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	2000	30% DISCOUNT
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	1000	30% DISCOUNT
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	1000	30% DISCOUNT
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	1000	30% DISCOUNT
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	1000	30% DISCOUNT
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	1000	30% DISCOUNT
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	6000	30% DISCOUNT
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	0	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	4000	30% DISCOUNT

Complete

31 Dec, 2023

IS 8498 (2013)

Temephos, emulsifiable concentrate (EC) - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	30% Discount
3.2.4(Emulsion Stability)	-	1000	30% Discount
3.3.1(Temephos content)	-	5000	30% Discount
3.2.2(Cold Test)	-	1000	30% Discount
3.3.2(Acidity (as H2SO4), )	-	1000	30% Discount
3.2.3(Flash Point (Abel))	-	1000	30% Discount

Complete

31 Dec, 2023

IS 8707 (2013)

Mancozeb, technical - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description )	-	1000	30% Discount
3.3 Table 1(Ethylene thiourea content)	-	1000	30% Discount
3.3 Table 1(Zinc content of mancozeb content)	-	1000	30% Discount
3.3 Table 1(Manganese content of mancozeb content)	-	1000	30% Discount
3.3 Table 1(Ethylene thiourea content)	-	1000	30% Discount
3.3 Table 1(Manganese content of mancozeb content)	-	1000	30% Discount
3.3 Table 1(Mancozeb content)	-	5000	30% Discount
3.3 Table 1(Ethylene thiourea content)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 253 (2014)

Specification for common salt (Fourth Revision)

COMMON SALT AND DAIRY SALT

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -3 for common salt 3.1 ( 3.1.1 ) ( The material shall be crystalline solid, white or pale pink or light grey in colour.)	-	500	30% DISCOUNT (Description)
Clause-3.1 for dairy salt (3.2.2)(3.2.2 Particle Size 99 percent by mass of the material shall pass completely through 850-micron IS Sieve [see IS 460 (Part I)].)	-	1000	Less 30% Discount
Clause-3.2 for dairy salt (3.2.3) Annex -2(3.2.3 Moisture The material shall contain not more than 0.5 percent by mass of moisture, on as received basis, when tested according to the methods given in A-2.)	-	1000	30% DISCOUNT
Table 1 (i) Annex -4(Water insoluble matter, common)	-	1000	30% DISCOUNT
Table 1 (ii) Annex-5(Chloride content (as NaCl)common)	-	2500	30% DISCOUNT
Table 1 (iii) Annex-6( Matter soluble in water, other than sodium chloride, common)	-	1000	30% DISCOUNT
Table 1 (iv)(Calcium (as Ca), water soluble, percent by mass, common)	-	1000	Less 30% Discount
Table 1 (v)(Magnesium (as Mg), water soluble, percent by mass, common )	-	1000	Less 30% Discount
Table 1 (vi)(Sulphate as SO2 percent by mass, common)	-	1000	Less 30% Discount
Table 1 (vii) Annex-9(Alkalinity (as Na2CO3), common)	-	1000	Less 30% Discount
Table 1 (viii)(Lead (as Pb), common)	-	1000	Less 30% Discount
Table 1 (ix)(Iron (as Fe), common)	-	1000	Less 30% Discount
Table 1 (x) Annex-11(x) Arsenic (as As), common)	-	2500	Less 30% Discount
Table 1 (xi) Annex-12(Copper (as Cu), common)	-	1000	30% DISCOUNT
A-3(Determination of ferrocyanide)	-	1000	Less 30% Discount

Complete

31 Dec, 2023

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

22182 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	30% Discount
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	30% Discount
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	30% Discount
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	4000	30% Discount
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	30% Discount
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	30% Discount
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	30% Discount
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	30% Discount
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	30% Discount
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	2000	30% Discount
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	30% Discount
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	30% Discount
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	5000	30% Discount

Complete

31 Dec, 2023

IS 8042 (2015)

White portland cement - Specification (Third Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	30% Discount
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	30% Discount
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	30% Discount
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	30% Discount
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	30% Discount
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	30% Discount
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	7000	30% Discount
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1000	30% Discount
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	2000	30% Discount
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1000	30% Discount
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	30% Discount
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	30% Discount
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	30% Discount
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	30% Discount
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	5000	30% Discount
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 3902 (1975)

Specification for dimethoate, technical

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	30% Discount
2.2 Table 1(Dimethoate content)	-	5000	30% Discount
2.2 Table 1(Water content)	-	1000	30% Discount
2.2 Table 1(Material insoluble in acetone)	-	2000	30% Discount
2.2 Table 1(Acidity (as H2SO4))	-	1000	30% Discount

Complete

31 Dec, 2023

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	1000	30% Discount
Cl. 2.3, Table-1(Copper Content)	-	5000	30% Discount
Cl. 2.3, Table-1(Suspensibility)	-	3000	30% Discount
Cl. 2.3, Table-1(pH of one percent aqueous dispersion)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 1832 (1978)

Specification for malathion, technical

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	Less 30% Discount
2.2 .Table 1.i(Malathion Content)	-	5000	Less 30% Discount
2.2 .Table 1.v(Specific Gravity at 25°C)	-	1000	Less 30% Discount
2.2 .Table 1.ii(Moisture Content)	-	1000	Less 30% Discount
2.2 .Table 1.iii(Acidity (as H2SO4))	-	1000	Less 30% Discount
2.2 .Table 1.iv(Material insoluble in acetone)	-	1000	Less 30% Discount

Complete

31 Dec, 2023

IS 2567 (1978)

Specification for malathion emulsifiable concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	30% Discount
2.3.1(Malathion content)	-	5000	30% Discount
2.3.2(Acidity (as H2SO4), )	-	1000	30% Discount
2.2.2(Cold Test)	-	1000	30% Discount
2.2.3(Flash Point (Abel))	-	1000	30% Discount
2.2.4(Emulsion Stability)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 2568 (1978)

Specification for malathion dusting powders

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	30% Discount
2.2. Table1.i(Malathion content)	-	5000	30% Discount
2.2. Table1.v(Acidity/Alkalinity)	-	1000	30% Discount
2.2. Table1.iii(Material passing through 75-micron IS Sieve)	-	1000	30% Discount
2.2. Table1.iv(Bulk'density after compacting)	-	2000	30% Discount

Complete

31 Dec, 2023

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Dimensions Fig 1 and Table 1)	-	1000	Rebate 30% Discount
4.3(Thickness)	-	1000	Rebate 30% Discount
4.4.4(Tension Set)	-	1500	Rebate 30% Discount
4.5(pH of Aqueous Extract )	-	1000	Rebate 30% Discount
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	3500	Rebate 30% Discount & Charges of Tensile test and elongation rs=2500/-
4.4.3(After heat ageing in autoclave)	-	1000	Rebate 30% Discount & Charges of Tensile test and elongation rs=2500/-
4.4.3 a)(Tensile strength)	-	2500	Rebate 30% Discount & Charges of Tensile test and elongation are included as one i.e rs=2500/-
4.4.3 b)(Elongation at break)	-	2500	Rebate 30% Discount & Charges of Tensile test and elongation are included as one i.e rs=2500/-

Complete

31 Dec, 2023

IS 6438 (1980)

Specification for aluminium phosphide formulations (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	30% Discount
2.3.1(Aluminium Phosphide Content)	-	5000	30% Discount
2.3.2(Evolution of Gas)	-	2000	30% Discount
Amendment no. 3, Page no. 4, Clause no. 2.2.1 (Average wt of 20 tablets)	-	2000	30% Discount

Complete

31 Dec, 2023

IS 9355 (1980)

Specification for butachlor, technical

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Deseriptio)	-	1000	30% Discount
2.2 TABLE 1(Butachlor content, percent by mass min)	-	5000	30% Discount
2.2 Table 1(Moisture content, percent by mass, max)	-	1000	30% Discount
2.2 TABLE 1(acidity (as H2SO4), percent by mass max)	-	1000	30% Discount
2.2 TABLE 1(Material insoluble in acetone, percent by mass, max)	-	2000	30% Discount

Complete

31 Dec, 2023

IS 9356 (1980)

Specification for butachlor emulsifiable concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	30% Discount
2.3.1(Butachlor Content, NV upto 9)	-	5000	30% Discount
2.2.2(Cold Test)	-	1000	30% Discount
2.2.3(Flash Point)	-	1000	30% Discount
2.2.4(Emulsion Stability)	-	1000	30% Discount
2.3.2(Acidity)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	2500	-
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	2500	-
13(External Influences, IS 9537-2)	-	3500	-
8.2(Construction, IS 9537-2)	-	2000	-
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	500	-
7.1(Dimensions)	-	2000	-

Complete

31 Dec, 2023

IS 9665 (1981)

Specification for propoxur emulsifiable concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	LESS 30% DISCOUNT
2.3.2(Acidity)	-	1000	LESS 30% DISCOUNT
2.2.2(Cold Test)	-	1000	LESS 30% DISCOUNT
2.2.3(Flash Point)	-	1000	LESS 30% DISCOUNT
2.2.4(Emulsion Stability)	-	1000	LESS 30% DISCOUNT
2.3.1(Propoxur Content, NV above 9 and below 50)	-	5000	LESS 30% DISCOUNT

Complete

31 Dec, 2023

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

12569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.1.1 Table-2(Length of Socket end)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.2(Minimum inside diameter of conduit)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
7.3(Length of conduit)	-	1000	Charges of Maximum & minimum Diameter of socket & conduit , length of socket end & Conduit are same that is Rs=1000/-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1500	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	5000	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	-
10(Resistance to Heat -Ball presure test)	-	1500	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	5000	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	5000	-

Complete

31 Dec, 2023

IS 3903 (1984)

Specification for dimethoate emulsifiable concentrates

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	Less 30% Discount
2.3.2(Acidity)	-	1000	Less 30% Discount
2.2.2(Cold Test)	-	1000	Less 30% Discount
2.2.3(Flash Point)	-	1000	Less 30% Discount
2.2.4(emulsion Stability)	-	1000	Less 30% Discount
2.3.1(Dimethoate Content, NV above 9 and below 50)	-	5000	Less 30% Discount

Complete

31 Dec, 2023

IS 11997 (1987)

Specification for fbnvaleratb AC

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	LESS 30% DISCOUNT
2.3.1(Fenvelarte content)	-	5000	LESS 30% DISCOUNT
2.2.2(Cold Test)	-	1000	LESS 30% DISCOUNT
2.2.3(Flash Point (Abel))	-	1000	LESS 30% DISCOUNT
2.2.4(Emulsion Stability)	-	1000	LESS 30% DISCOUNT
2.3.2(Acidity/Alkalinity)	-	1000	LESS 30% DISCOUNT

Complete

31 Dec, 2023

IS 12016 (1987)

Specification for cypermethrin EC

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	1000	less 30% Discount
2.3.1(Cypermethrin content)	-	5000	less 30% Discount
2.2.2(Cold Test)	-	1000	less 30% Discount
2.3.2(Acidity)	-	1000	less 30% Discount
2.2.3(Flash Point (Abel))	-	1000	less 30% Discount
2.2.4(Emulsion Stability)	-	1000	less 30% Discount

Complete

31 Dec, 2023

IS 702 (2022)

SPECIFICATION FOR INDUSTRIAL BITUMEN

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 and 6.1 Table 1(Flash point, Cleavland open cup)	-	1500	LESS 30% REBATE
5.1 and 6.1 Table 1(Specific Gravity, 85/25)	-	1500	LESS 30% REBATE
5.1 and 6.1 Table 1(Softneing Point 85/25)	-	2000	LESS 30% REBATE
5.1 and 6.1 Table 1(Penetration at 25C 85/25)	-	2000	LESS 30% REBATE
5.1 and 6.1 Table 1(loss on heating)	-	1500	LESS 30% REBATE
5.1 and 6.1 Table 1(Penetration of residue at 25C)	-	3000	LESS 30% REBATE
5.1 and 6.1 Table 1(Matter Soluble in trichloroethylene)	-	1500	LESS 30% REBATE
5.1 & 6.1, Table 1, S.No.6(Ductility test)	-	2000	LESS 30% REBATE
6-Table 1-i)(Specific gravity at 27 °C)	-	0	-
6-Table 1-iii)(Softening point, °C)	-	0	-
6-Table 1-ii)(Flash point, Cleveland open cup, °C, Min)	-	0	-
6-Table 1-iv)(Penetration at 25 °C, 100g, 5 sec, 1/10 mm)	-	0	-
6-Table 1-v)(a) Loss on heating, percent by mass, Min b) Penetration of the residue at 25 °C, 100g, 5 s, percent of original, Min)	-	0	-
6-Table 1-vi)(Ductility at 27 °C, cm, Min)	-	0	-
6-Table 1-vii)(Matter soluble in trichloroethylene, percent by mass, Min)	-	0	-

Complete

31 Dec, 2023

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

30525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 a) i)(Annealing Test ( For copper wire ) )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 e) v) (Sheath : Hot deformation)	-	1500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2500	-
15.1 e) vi) (Sheath : Heat shock test)	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	3000	Charges of Shrinkage (Sheath & Insulation) are same that is Rs=3000/-
15.1 e) vii) (Sheath : Thermalstability)	-	2000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	2000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	3000	Charges of Tensile Strength & Elongation are same that is Rs=3000/-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	3000	Charges of Tensile Strength & Elongation are same that is Rs=3000/-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	3000	Charges of Shrinkage (Sheath & Insulation) are same that is Rs=3000/-
9.2(Thickness of Insulation - Average)	-	3000	-
9.3(Thickness of Insulation - Minimum)	-	3000	-
12.3(Thickness of Inner Sheath)	-	3000	-
14.3(Thickness of outer sheath - minimum)	-	3000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	3000	Charges of Flammability test for (Period of burning & unaffected length) are same i.e Rs=3000/-
16.3(FLAMMABILITY TEST : Unaffected length )	-	3000	Charges of Flammability test for (Period of burning & unaffected length) are same i.e Rs=3000/-
16.9(Oxygen Index Test)	-	2500	-
16.2(HIGH VOLTAGE TEST )	-	2500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	-
13.3(Armouring : Dimensions -Formed wire )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	-
13.6 g)(ARMOURING: Resistivity)	-	2500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1500	-
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	10000	-
16.13(Test for Halogen Acid Gas Evolution)	-	5000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 a) iv)(Resistance test - Main conductor)	-	2000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	2000	-
16.14(Temperature Index)	-	7500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	6500	ageing in air oven + (Tensile strength & Elongation) = 3500 + 3000 = 6500rs
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1500	Charges of Tensile test for Al (Before Stranding & After Stranding) are same i.e Rs=1500/-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1500	Charges of Tensile test for Al (Before Stranding & After Stranding) are same i.e Rs=1500/-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	3000	Charges of Tensile strength & Elongation for (Insulation) are same that is Rs=3000/-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	3000	Charges of Tensile strength & Elongation for (Insulation) are same that is Rs=3000/-
Cl 16(Halogen Acid Gas Test)	-	0	repeated parameter
Table 2(Cold bend test for Outer sheath)	-	2000	-
Table 2(Cold Impact test for Outer sheath)	-	2000	-
16.1(Flame Retardance Test on Single Cables)	-	2500	-
13.6 b)(ARMOURING: Elongation )	-	1500	-

Complete

31 Dec, 2023

Flame retardance on bunched cable, specific optical density of smoke, smoke density (Cl 151.1, C1 & C2 Category)

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Fineness 4031 Part 2)	-	1000	LESS 30% REBATE
5.3 a)(Setting Time Initial- 4031 Part 5)	-	500	LESS 30% REBATE
5.3 b)(Setting Time Final- 4031 Part 5)	-	500	LESS 30% REBATE
5.5 i)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
5.5 ii)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	LESS 30% REBATE
5.5 iii)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	LESS 30% REBATE
4.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	7000	LESS 30% REBATE
4.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	2000	LESS 30% REBATE
4.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1000	LESS 30% REBATE
4.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1000	LESS 30% REBATE
4.1 - Table - 1 vii(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	LESS 30% REBATE
5.2.1(Expansion by Autoclave- 4031 Part 3)	-	1000	LESS 30% REBATE
5.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1000	LESS 30% REBATE

Complete

31 Dec, 2023

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Description)	-	500	LESS 30 % DISCOUNT
5.3 Table-1 i(Available chlorine)	-	2500	LESS 30 % DISCOUNT
5.3 Table-1 ii(Stability, loss of Chlorine on the basis of initial available chlorine )	-	5000	LESS 30 % DISCOUNT
Clause 5.3 Table 1(Moisture)	-	1000	LESS 30 % DISCOUNT
Clause 5.3 Table 1(Particle size)	-	1000	LESS 30 % DISCOUNT
Clause 5.4(Keeping Quality )	-	5000	LESS 30 % DISCOUNT

Complete

31 Dec, 2023

IS 1488 (1989)

Pesticides - 2, 4 - D sodium salt, technical - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	1000	30% Discount
3.2.3 & 7.1 Table i(Acid content. ( calculated as 2, 4-dichlorophenoxy acetic acid. 2, 4.D))	-	5000	30% Discount
3.2.3 & 7.1 Table ii(Water insoluble matter)	-	1000	30% Discount
3.2.3 & 7.1 Table iii(Free phenol Content (expressed as 2, 4-dichloropbenol of the declared acid content))	-	1000	30% Discount
3.2.3 & 7.1 Table iv(Melting point of the extracted acid)	-	1000	30% Discount
3.2.3 & 7.1 Table v(Loss on drying at 105°C)	-	1000	30% Discount

Complete

31 Dec, 2023

IS 12751 (1989)

Pesticides - Pendimethalin EC - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	LESS 30% DISCOUNT
3.3.1(Pendimethalin content)	-	5000	LESS 30% DISCOUNT
3.2.2(Cold Test)	-	1000	LESS 30% DISCOUNT
3.2.3(Flash Point (Abel))	-	1000	LESS 30% DISCOUNT
3.2.4(Emulsion Stability)	-	1000	LESS 30% DISCOUNT
3.4(Acidity/Alkalinity)	-	1000	LESS 30% DISCOUNT

Complete

31 Dec, 2023

Bureau of Indian Standards

The National Standards Body of India

SIIR, Delhi Shriram Institute For Industrial Research

19-University Road, Delhi 110007, Delhi, North, Delhi, 110007

9868670895 laxmirawat@shriraminstitute.org

Scope List