BIS - LIMS (Laboratory Information Management System)

Atharva Laboratories Pvt. Ltd. (C-54), Noida

C-54, Hosiery Complex, Phase-II, Noida-201305, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 atharvalaboratories2@gmail.com

Scope List

Reset

65 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	15000	-
5(General Safety Considerations)	-	1000	-
5.1(General)	-	1000	-
5.2(Insulation and Wiring)	-	1000	-
5.3(Venting)	-	1000	-
5.4(Temperature, Voltage and Current Management)	-	1000	-
5.5(Terminal Contacts)	-	1000	-
5.6(Assembly of Cells into batteries)	-	1000	-
5.7(Quality Plan)	-	1000	-
5.8(Battery Safety Components)	-	1000	-
6(Type Test and Sample Size)	-	500	-
7(Specific requirements and tests)	-	2500	-
7.1(Charging procedure for test purposes)	-	5000	-
7.2(Intended Use)	-	18000	-
7.3(Reasonably foreseeable misuse)	-	19000	-
8(Information for safety)	-	2000	-
8.1(General)	-	500	-
8.2(Small Cell and battery safety information)	-	500	-
9(Marking)	-	500	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	2000	-
9.4(Other information)	-	2000	-
10(Packaging)	-	2000	-
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	20000	-

-
-

IS 16102 (Part 1) (2026)

Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirenents and General Test Requirements)	-	1000	-
Cl-6.1(Cap Interchangeability)	-	2000	-
Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder)	-	2000	-
Cl-7(Protection Against Accidental Contact with live parts)	-	8000	-
Cl-8.1(Insulation resistance and electric strength)	-	8000	-
Cl-8.2(Insulation Resistance lamp)	-	1000	-
Cl-8.3(Electric Strength)	-	2000	-
Cl-9.1(Mechanical Strength Requirements)	-	5000	-
Cl-9.2.1(Torsion Resistance of Unused Lamps)	-	500	-
Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage)	-	500	-
Cl-9.2.3(Externally Applied Axial Pull and Bending Moment)	-	2000	-
Cl-9.3(Axial Strength of Edison Caps)	-	1000	-
Cl-10(Cap Temperature Rise)	-	8000	-
Cl-11(Resistance to Heat)	-	4000	-
Cl-12(Resistance to Flame and Ignition)	-	4000	-
Cl-13.1(Fault Conditions- General Requirements)	-	3000	-
Cl-14(Creepage Distance and Clearances)	-	2000	-
Cl-15(Abnormal Operation)	-	1500	-
Cl-16(Test Conditions for Dimmable Lamps)	-	500	-
Cl-17.1(UV Radiation)	-	500	-
Cl-17.2(Blue Light Hazard)	-	500	-
Cl-18(Ingress Protection Requirements)	-	2000	-
Cl-19(Information for luminaire design)	-	500	-
Cl-20.3(Accidentally Broken Lamps)	-	500	-
Cl-5(Marking)	-	1000	-

-
Included w.e.f. 03.06.2026

IS 10322 (Part 5/Sec 8) (2026)

Luminaires Part 5: Particular requirements Section 8: Luminaires for emergency lighting (First Revision)

56000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-22.4(General test requirements)	-	4000	-
Cl-22.4(Self-contained portable emergency luminaires)	-	1000	-
Cl-22.6(Marking)	-	4000	-
Cl-22.7(Construction)	-	4000	-
Cl-22.7.4(mechanical strength)	-	2000	-
Cl-22.8(Creepage distances and clearances)	-	3000	-
Cl-22.9(Provision of earthing)	-	3500	-
Cl-22.10(Terminals)	-	3000	-
Cl-22.11(External and internal wiring)	-	3000	-
Cl-22.12(Protection against electric shock)	-	4000	-
Cl-22.13(Endurance test and thermal test)	-	8000	-
Cl-22.13.1(The endurance test)	-	2000	-
Cl-22.14(Resistance to dust and moisture)	-	5000	-
Cl-22.15(Insulation resistance and electric strength)	-	5000	-
Cl-22.16(Resistance to heat, fire and tracking)	-	6000	-
Cl-22.17(Photometric data)	-	3000	-
Cl-22.18(Changeover operation)	-	500	-
Cl-22.19(High temperature operation)	-	1000	-
Cl-22.20(Battery chargers for self-contained emergency luminaires)	-	500	-
Cl-22.21(Test devices for emergency operation)	-	500	-

-
Included w.e.f. 17.06.2026 Exclusion: Cl-22.7 (Construction)

IS 10322 (Part 5/Sec 7) (2026)

Luminaires Part 5: Particular requirements Section 7: Lighting chains (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-20.4(General test requirements)	-	4000	-
Cl-20.5.2(Protection against electric shock)	-	3000	-
Cl-20.6.1(Marking-General)	-	2000	-
Cl-20.6.2(Lighting chain marking)	-	500	-
Cl-20.6.3(Lighting chain and packaging marking)	-	500	-
Cl-20.6.4(Packaging or instructions marking)	-	1000	-
Cl-20.7.1(Construction- General)	-	3000	-
Cl-20.7.2(Lampholders)	-	1000	-
Cl-20.7.4(Terminals and supply connections)	-	1000	-
Cl-20.7.5(Gaskets)	-	500	-
Cl-20.7.6(Mechanical strength)	-	1000	-
Cl-20.7.7(Lamp bridging devices)	-	500	-
Cl-20.7.8(Control units and controlgear)	-	500	-
Cl-20.7.9(Lamp rotation)	-	1000	-
Cl-20.7.10(Lamp insertion and withdrawal force)	-	1000	-
Cl-20.7.11(Lamp mechanical requirements)	-	1000	-
Cl-20.7.12(Temporarily installed protected lighting (TPL) chains)	-	1000	-
Cl-20.8(Creepage distances and clearances)	-	3000	-
Cl-20.10(Terminals)	-	2000	-
Cl-20.11.2(Cables for lighting chains)	-	1000	-
Cl-20.11.3(Cord anchorage test)	-	1000	-
Cl-20.11.4(Plugs and cable length)	-	500	-
Cl-20.11.5(Maximum length of extendable class II lighting chains)	-	500	-
Cl-20.12(Protection against electric shock)	-	3000	-
Cl-20.12.2(Divisible plug)	-	500	-
Cl-20.12.3(Electrification of decorations)	-	1000	-
Cl-20.12.4(Contacts of push-in lampholders)	-	500	-
Cl-20.12.5(Blanking plugs)	-	500	-
Cl-20.13.2(Test voltage)	-	1000	-
Cl-20.13.3(Lamp bridging devices)	-	500	-
Cl-20.13.4(Short-circuit test of rectifier)	-	1000	-
Cl-20.14(Resistance to dust, solid objects and moisture)	-	5000	-
Cl-20.15(Insulation resistance and electric strength)	-	4000	-
Cl-20.16(Resistance to heat, fire and tracking)	-	5000	-

-
Included w.e.f 17.06.2026 Exclusion: Cl-20.7.1 (Construction- General)

IS 10322 (Part 5/Sec 6) (2026)

Luminaires Part 5: Particular requirements Section 6: Handlamps (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.4(General test requirements)	-	4000	-
Cl-8.6(Marking)	-	3000	-
Cl-8.7(Construction)	-	6000	-
Cl-8.7.1(Handle of the handlamp)	-	1000	-
Cl-8.7.2(Lamp)	-	500	-
Cl-8.7.4(Tungsten filament lamps)	-	500	-
Cl-8.7.5(Flexible cable or cord)	-	1000	-
Cl-8.7.6(Mechanical strength)	-	500	-
Cl-8.7.6.1(Translucent covers and protective covers)	-	500	-
Cl-8.8(Creepage distances and clearances)	-	3000	-
Cl-8.10(Terminals)	-	2000	-
Cl-8.10.1(Terminals for supply connection)	-	1000	-
Cl-8.11(External and internal wiring)	-	4500	-
Cl-8.11.1(Rewirable handlamps)	-	500	-
Cl-8.11.1(Non-rewirable handlamps)	-	500	-
Cl-8.12(Protection against electric shock)	-	3500	-
Cl-8.13(Endurance tests and thermal tests)	-	8000	-
Cl-8.13.1(Endurance test)	-	500	-
Cl-8.13.2(Thermal tests)	-	2000	-
Cl-8.13.3(Limiting temperature)	-	1000	-
Cl-8.14(Resistance to dust and moisture)	-	5000	-
Cl-8.15(Insulation resistance and electric strength)	-	4000	-
Cl-8.16(Resistance to heat, fire and tracking)	-	5000	-

-
Included w.e.f 17.06.2026 Exclusion: Cl-8.7 (Construction)

IS 10322 (Part 5/Sec 5) (2026)

Luminaires Part 5: Particular requirements Section 5: Floodlights (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.5(Marking)	-	3000	-
Cl-5.6(Construction)	-	6000	-
Cl-5.6.8.1(Protection by the use of glass that fractures into small pieces)	-	1000	-
5.6.8.2(Protection by the use of high impact resistant glass (high mechanical strength.))	-	1000	-
Cl-5.6.8.2.1(Thermal endurance test)	-	2000	-
Cl-5.7(Creepage distances and clearances)	-	3000	-
Cl-5.8(Provision for earthing)	-	4000	-
Cl-5.9(Terminals)	-	3000	-
Cl-5.10(External and internal wiring)	-	4000	-
Cl-5.11(Protection against electric shock)	-	4500	-
Cl-5.12(Endurance tests and thermal tests)	-	8500	-
Cl-5.13(Resistance to dust and moisture)	-	5000	-
Cl-5.14(Insulation resistance and electric strength)	-	3000	-
Cl-5.15(Resistance to heat, fire and tracking)	-	5500	-

-
Included w.e.t 03.06.2026 Exclusion: Cl-5.6 (Construction)

IS 10322 (Part 5/Sec 3) (2026)

Luminaires Part 5: Particular requirements Section 3: Luminaires for road and street lighting (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2(General test requirements)	-	500	-
Cl-3.5(Marking)	-	1000	-
Cl-3.6.1(All luminaires)	-	2000	-
Cl-3.6.2(Luminaires for suspension on span wires)	-	500	-
Cl-3.6.3(Luminaire or external part)	-	500	-
Cl-3.6.4(Lampholders or optical part)	-	500	-
Cl-3.6.5(Breaking glass (glass covers))	-	1000	-
Cl-3.6.5.2.1(high mechanical strength)	-	1000	-
Cl-3.7(Creepage distances and clearances)	-	2500	-
Cl-3.8(Provision for earthing)	-	2000	-
Cl-3.8.1(Fixed part of the terminal)	-	1000	-
Cl-3.9(Terminals)	-	2500	-
Cl-3.10(External and internal wiring)	-	3000	-
Cl-3.10.1(Road and street lighting)	-	1000	-
Cl-3.11(Protection against electric shock)	-	1500	-
Cl-3.12(Endurance tests and thermal tests)	-	3500	-
Cl-3.13(Resistance to dust and moisture)	-	4500	-
Cl-3.14(Insulation resistance and electric strength)	-	2500	-
Cl-3.15(Resistance to heat, fire and tracking)	-	2000	-
Cl-3.15(Resistance to heat, fire and tracking)	-	2000	-
Cl-3.15(Resistance to heat, fire and tracking)	-	2000	-
Cl-3.15(Resistance to heat, fire and tracking)	-	2000	-

-
Included w.e.f. 03.06.2026 Exclusion: Cl-3.6.1 (All luminaires)

IS 10322 (Part 5/Sec 2) (2026)

Luminaires Part 5: Particular requirements Section 2: Recessed luminaires and recessed air-handling luminaires (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.4(General test requirements)	-	2500	-
Cl-2.6.2(Marking)	-	1000	-
Cl-2.6.3(Marking)	-	500	-
Cl-2.6.4(Marking)	-	500	-
Cl-2.7(Construction)	-	2500	-
Cl-2.8(Creepage distances and clearances)	-	2500	-
Cl-2.9(Provision for earthing)	-	2500	-
Cl-2.10(Terminals)	-	2500	-
Cl-2.11(External and internal wiring)	-	2500	-
Cl-2.12(Protection against electric shock)	-	2500	-
Cl-2.13(Endurance tests and thermal tests)	-	3000	-
Cl-2.14(Resistance to dust and moisture)	-	3000	-
Cl-2.15(Insulation resistance and electric strength)	-	2500	-
Cl-2.16(Resistance to heat, fire and tracking)	-	2500	-

-
Included w.e.f 17.06.2026 Exclusion: Cl-2.7 (Construction)

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	500	-
Cl-1.6(Marking)	-	1000	-
Cl-1.7(Construction)	-	3000	-
Cl-1.8(Creepage distances and clearances)	-	2500	-
Cl-1.9(Provision for earthing)	-	2500	-
Cl-1.10(Terminals)	-	2000	-
Cl-1.11(External and internal wiring)	-	2500	-
Cl-1.12(Protection against electric shock)	-	1500	-
Cl-1.12(Protection against electric shock)	-	1500	-
Cl-1.13(Endurance tests and thermal tests)	-	3500	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	4500	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	2200	-
Cl-1.16(Resistance to heat, fire and tracking)	-	2000	-
Cl-1.4(General test requirements)	-	0	-
Cl-1.6(Marking)	-	0	-
Cl-1.7(Construction)	-	0	-
Cl-1.8(Creepage distances and clearances)	-	0	-
Cl-1.9(Provision for earthing)	-	0	-
Cl-1.10(Terminals)	-	0	-
Cl-1.11(External and internal wiring)	-	0	-
Cl-1.12(Protection against electric shock)	-	0	-
Cl-1.12(Protection against electric shock)	-	0	-
Cl-1.13(Endurance tests and thermal tests)	-	0	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	0	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	0	-
Cl-1.16(Resistance to heat, fire and tracking)	-	0	-

-
Included w.e.f 17.06.2026 Exclusion: Cl-1.7 (Construction)

IS 13713 (2021)

Plastic Chairs for General Purposes - Specification ( First Revision )

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	500	-
5(Design)	-	500	-
6(Dimensions)	-	500	-
6 Table 1i a(Seat: Seat height)	-	500	-
6 Table 1i b(Seat: Effective seat depth)	-	500	-
6 Table 1i c(Seat: Seat width)	-	500	-
6 Table 1ii(Total height)	-	500	-
6 Table 1iii a(Total width (For chair with arms))	-	500	-
6 Table 1iii b(Total width (For chair without arms))	-	500	-
6 Table 1iv a(Total depth (For chair with arms))	-	500	-
6 Table 1iv b(Total depth (For chair without arms))	-	500	-
7(Mass)	-	500	-
8(Workmanship and finish)	-	500	-
9.1.1(Strength Test-static test)	-	2000	-
9.1.1(Strength Test-fatigue test)	-	2000	-
9.1.1(Strength Test-Impact test)	-	2000	-
9.1.2(Stability Test)	-	2000	-
9.1.3(Free Fall Drop Test)	-	1500	-
9.1.4(Static Load Test for Leg Slippage and Distortion)	-	2500	-
9.1.5(Handle Impact Test)	-	2000	-
9.1.6(Vibration Test)	-	3000	-
9.1.7(Rigidity Test for Chair Shell)	-	2500	-
9.1.8(Colour Fastness to Daylight)	-	2500	-
9.1.9(Determination of Flammability by Oxygen Index)	-	3000	-

-
Included w.e.f. 17.03.2026

IS 17509 (2021)

Disposable Baby Diaper Specification

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	250	-
Clause no. 3.1(Top Cover / Top Sheet)	-	500	-
Clause no. 3.2(Absorbent Core)	-	500	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	500	-
Clause no. 4(Fastening & Securing Mechanism)	-	250	-
Clause no. 5(ManufactureWorkmanship and Finish)	-	250	-
Clause no.6(Type and Size: FOR X LARGE)	-	250	-
Clause no.6(Diaper Length)	-	250	-
Clause no.6(Diaper Width)	-	250	-
Clause no.6(Diaper Crotch)	-	250	-
Clause no.6(Absorbent Core Length)	-	250	-
Clause no.6(Absorbent Core Width Back)	-	250	-
1()	-	250	-
Clause no.6(Absorbent Core Length)	-	250	-
Clause no.6(Absorbent Core Width Front)	-	250	-
Clause no.6(Core Cortch)	-	250	-
Clause no.7(Performance Requirements)	-	17500	-
Clause no.7.1(pH Value)	-	500	-
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	250	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	250	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	250	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	2500	-
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	1000	-
Clause no.7.5(Phthalate Test)	-	1500	-
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	3000	-
9 & 9.1(Marking)	-	250	-
10(Packing)	-	250	-
CL 7.3(Total Viable Count)	-	500	-
CL 7.3(Staphylococcus aureus)	-	1000	-
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	3000	-
Cl.7.5 of IS 17509(Di- Isobutyl phthalate)	-	250	-
Cl.7.5 of IS 17509(Di-butyl phthalate)	-	250	-
Cl.7.5 of IS 17509(Butyl benzyl phthalate)	-	250	-
Cl.7.5 of IS 17509(Di(2-ethylhexyl) phthalate)	-	250	-
Cl.7.5 of IS 17509(Di-n-octyl phthalate)	-	250	-
Cl.7.5 of IS 17509(Di-iso-decyl phthalate)	-	250	-
Cl.7.5 of IS 17509(Di-iso-nonyl phthalate)	-	250	-
Cl.7.5 of IS 17509(Total amount of phthalate)	-	250	-
7.1(pH Test)	-	500	-
7.2, Table 2("Rate of absorption per gush (s), Max")	-	500	-
7.2, Table 2("Rewet under load, (g), Max")	-	250	-
7.2, Table 2(Minimum Absorption Capacity (Premature baby))	-	250	-
7.2, Table 2(Minimum Absorption Capacity (New Born))	-	250	-
7.2, Table 2(Minimum Absorption Capacity (Small))	-	250	-
7.2, Table 2(Minimum Absorption Capacity (Medium))	-	250	-
7.2, Table 2(Minimum Absorption Capacity (Large))	-	250	-
7.2, Table 2(Minimum Absorption Capacity (XX large))	-	250	-
7.2, Table 2(Minimum Absorption Capacity (XXX large))	-	250	-
6.2(Type and Sizes)	-	250	-
Clause no. 3(Material)	-	0	-
Clause no. 3.1(Top Cover / Top Sheet)	-	0	-
Clause no. 3.2(Absorbent Core)	-	0	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	-
Clause no. 4(Fastening & Securing Mechanism)	-	0	-
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	-
Clause no.6(Type and Size: FOR X LARGE)	-	0	-
Clause no.6(Diaper Length)	-	0	-
Clause no.6(Diaper Width)	-	0	-
Clause no.6(Diaper Crotch)	-	0	-
Clause no.6(Absorbent Core Length)	-	0	-
Clause no.6(Absorbent Core Width Back)	-	0	-
1()	-	0	-
Clause no.6(Absorbent Core Length)	-	0	-
Clause no.6(Absorbent Core Width Front)	-	0	-
Clause no.6(Core Cortch)	-	0	-
Clause no.7(Performance Requirements)	-	0	-
Clause no.7.1(pH Value)	-	0	-
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	-
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	-
Clause no.7.5(Phthalate Test)	-	0	-
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	0	-
9 & 9.1(Marking)	-	0	-
10(Packing)	-	0	-
CL 7.3(Total Viable Count)	-	0	-
CL 7.3(Staphylococcus aureus)	-	0	-
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	0	-
Cl.7.5 of IS 17509(Di- Isobutyl phthalate)	-	0	-
Cl.7.5 of IS 17509(Di-butyl phthalate)	-	0	-
Cl.7.5 of IS 17509(Butyl benzyl phthalate)	-	0	-
Cl.7.5 of IS 17509(Di(2-ethylhexyl) phthalate)	-	0	-
Cl.7.5 of IS 17509(Di-n-octyl phthalate)	-	0	-
Cl.7.5 of IS 17509(Di-iso-decyl phthalate)	-	0	-
Cl.7.5 of IS 17509(Di-iso-nonyl phthalate)	-	0	-
Cl.7.5 of IS 17509(Total amount of phthalate)	-	0	-
7.1(pH Test)	-	0	-
7.2, Table 2("Rate of absorption per gush (s), Max")	-	0	-
7.2, Table 2("Rewet under load, (g), Max")	-	0	-
7.2, Table 2(Minimum Absorption Capacity (Premature baby))	-	0	-
7.2, Table 2(Minimum Absorption Capacity (New Born))	-	0	-
7.2, Table 2(Minimum Absorption Capacity (Small))	-	0	-
7.2, Table 2(Minimum Absorption Capacity (Medium))	-	0	-
7.2, Table 2(Minimum Absorption Capacity (Large))	-	0	-
7.2, Table 2(Minimum Absorption Capacity (XX large))	-	0	-
7.2, Table 2(Minimum Absorption Capacity (XXX large))	-	0	-
6.2(Type and Sizes)	-	0	-

-
Included w.e.f. 24.03.2026 Exclusion: "CL 7.4 (Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization) CL 7.6 (Biodegradability and Compostability (Optional)) Clause no. 7.4 (Biocompatibility Evaluation- Irritation) Clause no.7.4 (Biocompatibility Evaluation- Cytotoxicity) Clause no.7.4 (Biocompatibility Evaluation- Skin Sensitization) Clause no.7.6 (Biodegradability and Compostability (optional)) "

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	250	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	3500	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	1500	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	1500	-
6(Packing)	-	250	-
7(Marking)	-	250	-
5(Requirements)	-	6500	-
5.1(Workmanship and Finish)	-	250	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	3500	-
5.2- Table 1- ii)(Tensile strength)	-	1500	-
5.2- Table 1- iii)(Bursting strength)	-	1500	-
6(Packing)	-	250	-
7(Marking)	-	250	-

-
Included w.e.f. 24.03.2026

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

17200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	250	-
Clause no. 3.1(Top Cover / Top Sheet)	-	500	-
Clause no. 3.2(Absorbent Core)	-	500	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	500	-
Clause no. 4(Fastening & Securing Mechanism)	-	250	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	250	-
Clause no.6(Type and Size: FOR X LARGE)	-	250	-
Clause no.6(Diaper Length)	-	250	-
Clause no.6(Diaper Width)	-	250	-
Clause no.6(Diaper Crotch)	-	250	-
Clause no.6(Absorbent Core Length)	-	250	-
Clause no.6(Absorbent Core Width Back)	-	250	-
Clause no.6(Absorbent Core Width Front)	-	250	-
Clause no.6(Core Crotch Width)	-	250	-
Clause no.7.1(pH Value)	-	500	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	200	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	200	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	200	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	2500	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	1000	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	0	-
Clause no.7.5(Biodegradability and Compostability (optional))	-	0	-
Clause no.7.6(Anti-Bacterial Activity Value (optional))	-	3000	-
9(Marking)	-	250	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	1500	-
6(Type and Size)	-	250	-
7.1(pH Test)	-	500	-
7.2, Table 2("Rate of absorption (s), Max for all sizes")	-	500	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	500	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	500	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	500	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	500	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	500	-
Cl-7.7 (Amendment No-1)(Phthalate test- Di-iso-butyl phthalate (DIBP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-butyl phthalate (DBP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Benzylbutyl Phthalate (BBP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-octyl phthalate (DNOP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-nonylphthalate (DINP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-decyl phthalate (DIDP))	-	0	-
7.2, Table 2("Rate of absorption (s), Max for all sizes")	-	500	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	500	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	500	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	500	-

-
Included w.e.f. 24.03.2026 Exclusion: "Clause no. 7.4 (Biocompatibility Evaluation- Irritation) Clause no.7.4 (Biocompatibility Evaluation- Cytotoxicity) Clause no.7.4 (Biocompatibility Evaluation- Skin Sensitization) Clause no.7.5 (Biodegradability and Compostability (optional)) "

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

13750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	500	-
3.2(Absorbent core)	-	500	-
3.3(Barrier or bottom sheet)	-	500	-
4.1(Types)	-	250	-
4.2(shapes)	-	250	-
5(Sizes)	-	250	-
Cl. 5 Table-1(Type)	-	250	-
Cl. 5 Table-1(Size class)	-	250	-
Cl. 5 Table-1(Length (Absorbent core only))	-	250	-
Cl. 5 Table-1(Width (Absorbent core only))	-	250	-
6.1(Manufacture, workmanship and finish)	-	500	-
6.2(Manufacture, workmanship and finish)	-	0	-
7.1(pH Test)	-	500	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	1500	-
7.3.1(Bacterial and Fungal Bioburden)	-	2500	-
7.3.2(Staphylococcus aureus)	-	1000	-
Cl 7.5(Phthalate test- Combination)	-	1500	-
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	3000	-
3.1(Cover/Top Sheet (non sterile gauze))	-	0	-
3.1(Cover/Top Sheet (sterile gauze))	-	0	-
5(Size)	-	0	-
Cl 7.5(Phthalate test- Di-iso-butyl phthalate (DIBP))	-	0	-
Cl 7.5(Phthalate Test- Di-n-butyl phthalate (DBP))	-	0	-
Cl 7.5(Phthalate Test- Benzylbutyl Phthalate (BBP))	-	0	-
Cl 7.5(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-	0	-
Cl 7.5(Phthalate Test- Di-n-octyl phthalate (DNOP))	-	0	-
Cl 7.5(Phthalate Test- Di-iso-nonylphthalate (DINP))	-	0	-
Cl 7.5(Phthalate Test- Di-iso-decyl phthalate (DIDP))	-	0	-
7.1(pH Test)	-	0	-
7.2, Table 2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	0	-

-
Included w.e.f. 24.03.2026 Exclusion: "7.4 (Biocompatibility evaluation - Cytotoxicity (IS/ISO 10993 P-5)) 7.4 (Biocompatibility evaluation - Irritation (IS 17932 P-7)) 7.4 (Biocompatibility evaluation - skin Sensitization (Optional) (IS 17932 P-6)) 7.6 (Compostability (Optional) (IS/ISO 17088)) "

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

64000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	600	-
Cl No.4.2(Construction)	-	150	-
Cl No.4.3(Whole Footwear)	-	250	-
4.3.1(Insole)	-	250	-
4.3.2(Toe spring height)	-	500	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1000	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1000	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1000	-
4.3.6(Energy Absorption at Seat Region)	-	1500	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	1000	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	1500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	1200	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	1000	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	1000	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	1200	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1200	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	1000	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	1500	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	1500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	1500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	1200	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	400	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	1500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	500	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	1200	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	1200	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	400	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1500	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	1200	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	1200	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	2000	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1200	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	1000	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	1500	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	1000	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1200	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1200	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	1500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1500	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	30000	For Complete Chemical Testing
Cl No . 5(MARKING AND PACKING)	-	100	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1500	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	800	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4500	-
Clause 4.2 - 4.2.1(Construction)	-	250	-
Clause 4.2 - 4.2.2(Construction)	-	250	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	250	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	250	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1000	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1000	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1000	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	1000	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	1200	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	1200	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	1000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	1000	-
Clause 4.4, Table 2 iii)(Tear strength)	-	1000	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	1200	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.5, Table 3 i)(Tear strength)	-	1000	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1500	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	1200	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.6, Table 4 i)(Thickness)	-	400	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	1200	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	1200	-
Clause 4.7, Table 5 i)(Thickness)	-	400	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	1200	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	1200	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	1200	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1500	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1500	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2500	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	1200	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	1500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	250	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	500	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	1000	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1500	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	2000	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	800	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	1000	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	1500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	1000	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	1000	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	1000	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1200	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	1000	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	1500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	1500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1500	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1200	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1200	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	1200	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1200	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1500	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2500	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	1000	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	1500	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	1000	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1000	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1500	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	2000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	3000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	3000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	3000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	3000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	3000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	3000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	3000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	3000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	3000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	3000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	3000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	3000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	3000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	3000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	3000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	3000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	3000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	3000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	3000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	3000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	3000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	3000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	3000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	3000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	3000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	3000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	3000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	3000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	3000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	3000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	3000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	3000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	3000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	3000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	3000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	3000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	3000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	3000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	3000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	3000	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	1500	-

-
-

IS 17636 (2021)

Bunk Beds - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	1000	-
CLAUSE 5(DIMENSIONS)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	5000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	1000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	1000	-
CLAUSE 7.7(Stability Test)	-	1000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	2000	-
Cl-5(Dimensions)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1000	-
Cl-6.1 (d)(Resistance to dry heat)	-	1000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.1(general test conditions)	-	1000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	1000	-
Cl-7.3.1(Gaps)	-	1000	-
Cl-7.3.2(Gaps)	-	1000	-
Cl-7.4.1(Bed Base)	-	1000	-
Cl-7.4.2(Bed Base)	-	1000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	0	-
Cl-7.5.2(Dimensions of Treads)	-	1000	-
Cl-7.6(Strength of Frame and Fastenings)	-	1000	-
Cl-7.7(Stability)	-	1000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	1000	-
Cl-10(Marking)	-	1000	-

-
Included w.e.f. 10.02.2026

IS 17635 (2022)

Beds - Specification

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
CLAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	5000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7(SAFETY TESTS)	-	1000	-
CLAUSE 7.3(Stability Test)	-	1000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	1000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	1000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	1000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	5000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	5000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	7500	-
CLAUSE 7.7(Vertical Impact Test)	-	1000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	3000	-
CLAUSE 8.2(Extendable Storage Elements)	-	2000	-
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1000	-
Cl-6.1 (d)(Resistance to dry heat)	-	1000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.1(Safety Tests)	-	0	-
Cl-7.2(Safety Tests)	-	0	-
Cl-7.3(Stability Test)	-	0	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	0	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	0	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	1000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	1000	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	2000	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	2000	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	2000	-
Cl-7.7(Vertical Impact Test)	-	1000	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	1000	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	2000	-
Cl-10(Marking)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-

-
Included w.e.f. 10.02.2026

IS 17634 (2022)

Storage Units - Specification

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	5000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7.1(SAFETY TESTS (General))	-	1000	-
CLAUSE 7.2(Test for Non-Movable Parts)	-	1000	-
CLAUSE 7.2.1(Shelves)	-	1000	-
CLAUSE 7.2.1.2(Deflection of shelves)	-	1000	-
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	1000	-
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	1000	-
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	1000	-
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	1000	-
CLAUSE 7.2.4.2(Drop test)	-	1000	-
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	1000	-
CLAUSE 7.3.1(Pivoted Doors)	-	1000	-
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	1000	-
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	1000	-
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	1000	-
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	1000	-
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	1000	-
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	1000	-
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	9500	-
CLAUSE 7.3.3(Flaps)	-	1000	-
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	1000	-
CLAUSE 7.3.3.2(Durability of flaps)	-	4500	-
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	1000	-
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	1000	-
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	1000	-
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	4500	-
CLAUSE 7.3.5(Extension Element)	-	1000	-
CLAUSE 7.3.5.2(Strength of extension elements)	-	1000	-
CLAUSE 7.3.5.3(Durability of extension elements)	-	14000	-
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	1000	-
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	1000	-
CLAUSE 7.3.5.6(Interlock test)	-	1000	-
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	1000	-
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	1000	-
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	1000	-
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	4000	-
CLAUSE 7.3.7(Pull Force Test)	-	1000	-
CLAUSE 7.3.7(Pull Force Test)	-	1000	-
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	1000	-
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	4500	-
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	1000	-
CLAUSE 7.4.1.3(Sustained load test (overload))	-	1000	-
CLAUSE 7.4.1.4(Dislodgement test)	-	1000	-
CLAUSE 7.5(Stability Tests)	-	1000	-
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	1000	-
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	1000	-
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	1000	-
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	1000	-
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	1000	-
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	1000	-
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1000	-
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.1(General)	-	500	-
Cl-7.2.1(Shelves)	-	1000	-
Cl-7.2.2(Tops and Bottoms)	-	1000	-
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	1000	-
Cl-7.2.4(Strength of the Structure)	-	1000	-
Cl-7.3.1(Pivoted Doors)	-	1000	-
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	1000	-
Cl-7.3.3(Flaps)	-	1000	-
Cl-7.3.4(Vertical Roll-Fronts)	-	1000	-
Cl-7.3.5(Extension Elements)	-	1000	-
Cl-7.3.6(Locking and Latching Mechanism Test)	-	1000	-
Cl-7.3.7(Pull Force Test)	-	1000	-
Cl-7.3.8(Top Load Ease Cycle Test)	-	1000	-
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	1000	-
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	1000	-
Cl-7.4.1(Units Not Supported by the Floor)	-	1000	-
Cl-7.4.2(Units Supported by the Floor)	-	1000	-
Cl-7.5.1(General)	-	1000	-
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	1000	-
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	1000	-
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	1000	-
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	1000	-
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	1000	-
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	1000	-
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	1000	-
Cl-7.5.9(Strength Test for Wall Attachments)	-	1000	-
Cl-9(Marking)	-	1000	-

-
Included w.e.f.10.02.2026

IS 17633 (2022)

Tables and Desks - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
ClAUSE 5(Dimensions)	-	500	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	7000	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1000	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1000	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	1000	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	1000	-
CLAUSE 7.3.1.1(Stated load)	-	1000	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	1000	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	1000	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	5500	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	2500	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	5000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	3000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	1000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	1000	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	1000	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	1000	-
CLAUSE 7.7(Deflection of Table Tops)	-	1500	-
CLAUSE 7.8(Durability of Tables with Castors)	-	1500	-
CLAUSE 7.9(Drop Test)	-	1500	-
Cl - 5(Dimensions)	-	500	-
Cl-6 (a)(Resistance to mechanical damage)	-	2000	-
Cl-6 (b)(Pencil hardness)	-	1000	-
Cl-6 (c)(Resistance to wet heat)	-	1000	-
Cl-6 (d)(Resistance to dry heat)	-	1000	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6 (g)(Adhesive performance)	-	1500	-
Cl-7.2.1(Stability Under Vertical Load)	-	1000	-
Cl-7.2.2(Stability with Extension Elements Open)	-	1000	-
Cl-7.2.3(Stability Under Horizontal Load)	-	1000	-
Cl-7.3.1(Strength under Vertical Static Force)	-	1000	-
Cl-7.3.2(Strength under horizontal static force)	-	1000	-
Cl-7.4.1(Durability under Vertical Force)	-	5000	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	5000	-
Cl-7.5.1(General)	-	500	-
Cl-7.5.2(Durability under Horizontal Force)	-	5000	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	1000	-
Cl-7.6.1(General)	-	500	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	-
Cl-7.7(Deflection of Table Tops)	-	1000	-
Cl-7.8(Durability of Tables with Castors)	-	2500	-
Cl-7.9(Drop Test)	-	500	-
Cl-9(Marking)	-	1000	-
7.1(General test conditions)	-	500	-

-
Included w.e.f. 10.02.2026

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

77000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1500	-
CLAUSE 6(SURFACE PERFORMANCE)	-	6500	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	20000	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1000	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	1000	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.3.1.1(Seat static load test)	-	1800	-
CLAUSE 7.3.1.2(Back static load test)	-	1800	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	1800	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	1800	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	1800	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	1800	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	1800	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	1800	-
CLAUSE 7.3.2.1(Seat impact test)	-	1800	-
CLAUSE 7.3.2.2(Back impact test)	-	1800	-
CLAUSE 7.3.2.3(Arm impact test)	-	1800	-
CLAUSE 7.3.2.4(Drop test)	-	1800	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	19000	-
CLAUSE 7.4.2(Back Fatigue Test)	-	19000	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	19000	-
Cl - 5(DIMENSIONS)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1500	-
Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1500	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1500	-
Cl-7.2.2(Rearwards Overbalancing)	-	1500	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1500	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	500	-
Cl-7.3.1(Static Load Test)	-	2000	-
Cl-7.3.2(Impact Test)	-	2000	-
Cl-7.4.1(Seat Fatigue Test)	-	2000	-
Cl-7.4.2(Back Fatigue Test)	-	2000	-
Cl-7.4.3(Arm Rest Durability)	-	15000	-
Cl-9(Marking)	-	1000	-
7.1(General test conditions)	-	0	-

-
Included w.e.f. 10.02.2026

IS 17631 (2022)

Work Chairs - Specification

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	1000	-
clause 5(DIMENSIONS)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	5000	-
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	5000	-
Cl-7.3.1(Front Edge Overturning)	-	2000	-
Cl-7.3.2(Forwards Overturning)	-	2000	-
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	2000	-
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	2000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat;)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat;)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	2000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	2000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	-
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	1000	-
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	1000	-
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	1000	-
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	-
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1000	-
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	-
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	-
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1000	-
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	1000	-
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1500	-
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	1500	-
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1000	-
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1500	-
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	1500	-
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1500	-
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	1500	-
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	-
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	-
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	-
Cl-7.4.1(Seat Front Edge Static Load Test)	-	1500	-
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	1500	-
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	1500	-
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	1500	-
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	-
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	-
Cl-7.5.1(Seat and Back Durability)	-	20000	-
Cl-7.5.2(Arm Rest Durability)	-	15000	-
Cl-7.5.3(Swivel Test)	-	15000	-
Cl-7.5.4(Foot-rest Durability)	-	15000	-
Cl-7.5.5(Castor and Chair-Base Durability)	-	15000	-

-
Included w.e.f. 10.02.2026

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

139000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	1000	-
Cl-4.2(Energy source classifications)	-	1000	-
Cl-4.3(Protection against energy sources)	-	1000	-
Cl-4.4(Safeguards)	-	1000	-
Cl-4.5(Explosion)	-	1000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	1000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	-
Cl-4.10(Components requirements)	-	1000	-
Cl-5.1(General- Electrically-caused injury)	-	1000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	-
Cl-5.3(Protection against electrical energy sources)	-	1000	-
Cl-5.4(Insulation materials and requirements)	-	1000	-
Cl-5.5(Components as safeguards)	-	1000	-
Cl-5.6(Protective conductor)	-	1000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	-
Cl-6.1(General- Electrically-caused fire)	-	1000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	1000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	1000	-
Cl-6.5(Internal and external wiring)	-	1000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	1000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	-
Cl-7.3(Ozone exposure)	-	1000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	1000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	1000	-
Cl-8.1(General- Mechanically-caused injury)	-	1000	-
Cl-8.2(Mechanical energy source classifications)	-	1000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	-
Cl-8.5(Safeguards against moving parts)	-	1000	-
Cl-8.6(Stability of equipment)	-	2000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2000	-
Cl-8.8(Handle strength)	-	2000	-
Cl-8.9(Wheels or casters attachment requirements)	-	2000	-
Cl-8.10(Carts, stands, and similar carriers)	-	2000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2000	-
Cl-9.1(General-Thermal burn injury)	-	2000	-
Cl-9.2(Thermal energy source classifications)	-	2000	-
Cl-9.3(Touch temperature limits)	-	2000	-
Cl-9.4(Safeguards against thermal energy sources)	-	2000	-
Cl-9.5(Requirements for safeguards)	-	2000	-
Cl-9.6(Requirements for wireless power transmitters)	-	2000	-
Annex A(Examples of equipment within the scope of this document)	-	1000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	-
Annex B-2(Normal operating conditions)	-	1000	-
Annex B-3(Simulated abnormal operating conditions)	-	1000	-
Annex B-4(Simulated single fault conditions)	-	1000	-
Annex D-1(Impulse test generators)	-	1000	-
Annex E-1(Electrical energy source classification for audio signals)	-	1000	-
Annex E-2(Audio signals used during test)	-	1000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1000	-
Annex F-2(Letter symbols and graphical symbols)	-	1000	-
Annex F-3(Equipment markings)	-	1000	-
Annex F-4(Instructions)	-	1000	-
Annex F-5(Instructional safeguards)	-	1000	-
Annex G-1(Switches)	-	1000	-
Annex G-2(Relays)	-	1000	-
Annex G-3(Protective devices)	-	1000	-
Annex G-4(Connectors)	-	1000	-
Annex G-5(Wound components)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex G-7(Mains power supply cords and interconnection cables)	-	0	-
Annex G-8(Varistors)	-	0	-
Annex G-9(Integrated circuit (IC) current limiters)	-	0	-
Annex G-10(Resistors)	-	0	-
Annex G-11(Capacitors and RC units)	-	0	-
Annex G-13(Printed boards)	-	1000	-
Annex G-14(Coatings on component terminals)	-	1000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	1000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	-
Annex H-2(Method A)	-	1000	-
Annex H-3(Method B)	-	1000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex J-3(Testing during manufacturing)	-	0	-
Annex K-1(General- Safety interlocks)	-	1000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	1000	-
Annex K-3(Inadvertent change of operating mode)	-	1000	-
Annex K-4(Interlock safeguard override)	-	1000	-
Annex K-5(Fail-safe)	-	1000	-
Annex K-6(Mechanically operated safety interlocks)	-	1000	-
Annex K-7(Interlock circuit isolation)	-	1000	-
Annex L-1(General requirements)	-	1000	-
Annex L-2(Permanently connected equipment)	-	1000	-
Annex L-3()	-	1000	-
Annex L-4(Single-phase equipment)	-	1000	-
Annex L-5(Three-phase equipment)	-	1000	-
Annex L-6(Switches as disconnect devices)	-	1000	-
Annex L-7(Plugs as disconnect devices)	-	1000	-
Annex L-8(Multiple power sources)	-	1000	-
Annex L-9(Compliance criteria)	-	1000	-
Annex M-1(General requirements)	-	1000	-
Annex M-2(Safety of batteries and their cells)	-	1000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	-
Annex M-6(Safeguards against short-circuits)	-	1000	-
Annex M-9(Preventing electrolyte spillage)	-	1000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	1000	-
Annex N(Electrochemical potentials (V))	-	1000	-
Annex O(Measurement of creepage distances and clearances)	-	500	-
Annex P-1(General-Safeguards against conductive objects)	-	1000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	-
Annex Q-1(Limited power source)	-	1000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	1000	-
Annex S-4(Flammability classification of materials)	-	1000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	1000	-
Annex T-1(General-Mechanical strength tests)	-	1000	-
Annex T-2(Steady force test, 10 N)	-	1000	-
Annex T-3(Steady force test, 30 N)	-	1000	-
Annex T-4(Steady force test, 100 N)	-	1000	-
Annex T-5(Steady force test, 250 N)	-	1000	-
Annex T-6(Enclosure impact test)	-	1000	-
Annex T-7(Drop test)	-	1000	-
Annex T-8(Stress relief test)	-	1000	-
Annex T-9(Glass impact test)	-	1000	-
Annex T-10(Glass fragmentation test)	-	1000	-
Annex T-11(Test for telescoping or rod antennas)	-	1000	-
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	0	-
Annex V-1(Accessible parts of equipment)	-	1000	-
Annex V-2(Accessible part criterion)	-	1000	-
Annex W(Comparison of terms introduced in this document)	-	1000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1000	-
Annex Y-4(Gaskets)	-	1000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1000	-
Annex Y-6(Mechanical strength of enclosures)	-	1000	-
Annex G-12(Optocouplers)	-	0	-

-
"1 Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Annex U (""Mechanical strength of CRTs and protection against the effects ofimplosion"") Instrument not available. 2 Cl-10.2 (Radiation energy source classifications) (Radiation energy source classifications) Instrument not available. 3 Cl-10.3 (Safeguards against laser radiation) Safeguards against laser radiation Instrument not available. 4 Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Safeguards against optical radiation from lamps and lamp systems(including LED types) Instrument not available. 5 Cl-10.5 (Safeguards against X-radiation) Safeguards against X-radiation Instrument not available. 6 Cl-10.6 (Safeguards against acoustic energy sources) Safeguards against acoustic energy sources Instrument not available. 7 Annex C-1 (Protection of materials in equipment from UV radiation) Protection of materials in equipment from UV radiation Instrument not available. 8 Annex C-2 (UV light conditioning test) UV light conditioning test Instrument not available. 9 Annex D-2 (Antenna interface test generator) Antenna interface test generator Instrument not available. 10 Annex D-3 (Electronic pulse generator) Electronic pulse generator Instrument not available. 11 Annex R (Limited short-circuit test) Limited short-circuit test Instrument not available. 12 Annex Y-2 (Resistance to UV radiation) Resistance to UV radiation Instrument not available. 13 Cl-10.1 (General-Radiation) General-Radiation Instrument not available. 14 Annex M-7 (Risk of explosion from lead acid and NiCd batteries) Risk of explosion from lead acid and NiCd batteries Instrument not available. 15 Annex M-8 (""Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte"") Protection against internal ignition from external spark sources ofrechargeable batteries with aqueous electrolyte"") Instrument not available. 16 Annex Y-3 (Resistance to corrosion) Resistance to corrosion Instrument not available."

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

295000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	8500	-
Clause 4.3(Specifications)	-	4500	-
Clause 4.5(Safety Requirements)	-	122000	-
Clause 4.6(Electromagnetic Compatibility (EMC) Requirements)	-	0	(In Exclusion)
Clause 5(Marking)	-	1500	-
Clause 6(Operating Life Test)	-	18500	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	2500	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	4500	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	4500	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	4500	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	4500	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	4500	-
Clause 4.1, Table-1, i) g)(Teletext)	-	1500	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	1500	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	4500	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	4500	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	4500	-
Clause 4.1, Table-1, i) n)(Data services)	-	4500	-
Clause 4.1, Table-1, i) p)(OSD)	-	4500	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	4500	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	4500	-
Clause 4.1, Table-1, i) s)(Time)	-	500	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	1500	-
Clause 4.4, Table-2, i) b)(Frequency)	-	500	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	500	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	4500	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	1500	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	1500	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	4500	-
Clause 4.1, Table-1, ii) d)(Services available)	-	1500	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	1500	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	1500	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	1000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	2000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	4500	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	2000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	3000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	4500	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	2000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	1500	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	2000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	4500	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	4500	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	4500	-
Clause 4.4, Table-2, v)(Symbol rate)	-	4500	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	4500	-
Clause 4.4, Table-2, vii)(DisEqC)	-	1500	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	500	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	500	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	500	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	500	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	500	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	500	-
Clause 3.1, Table-1, v) c)(Support package)	-	500	-
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	-	-
Clause 4.3(Specifications)	-	-	-
Clause 4.5(Safety Requirements)	-	-	-
Clause 5(Marking)	-	-	-
Clause 6(Operating Life Test)	-	-	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	-	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	-	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	-	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	-	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	-	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	-	-
Clause 4.1, Table-1, i) g)(Teletext)	-	-	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	-	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	-	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	-	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	-	-
Clause 4.1, Table-1, i) n)(Data services)	-	-	-
Clause 4.1, Table-1, i) p)(OSD)	-	-	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	-	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	-	-
Clause 4.1, Table-1, i) s)(Time)	-	-	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	-	-
Clause 4.4, Table-2, i) b)(Frequency)	-	-	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	-	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	-	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	-	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	-	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	-	-
Clause 4.1, Table-1, ii) d)(Services available)	-	-	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	-	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	-	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	-	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	-	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	-	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	-	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	-	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	-	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	-	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	-	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	-	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	-	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	-	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	-	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	-	-
Clause 4.4, Table-2, v)(Symbol rate)	-	-	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	-	-
Clause 4.4, Table-2, vii)(DisEqC)	-	-	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	-	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	-	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	-	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	-	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	-	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	-	-
Clause 3.1, Table-1, v) c)(Support package)	-	-	-

-
Included w.e.f 31.12.2025 Clause 4.6 (Electromagnetic Compatibility (EMC) Requirements)

IS/ISO 834 : Part 8 (2002)

Fire-Resistance Tests - Elements of Building Construction Part 8 Specific Requirements for Non-load Bearing Vertical Separating Elements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	350000		-

-
Included w.e.f. 06.11.2025

IS/ISO 834 : Part 1 (1999)

Fire-Resistance Tests Elements of Building Construction Part 1 General Requirements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	350000		-

-
Included w.e.f. 06.11.2025

IS 17518 : Part 1 (2022)

Fire resistance tests Door and shutter assemblies Part 1: General requirements Adoption of ISO 3008-1:2019

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation)	-	350000		-

-
Included w.e.f. 06.11.2025

IS 16947 (2018)

Fire resistance tests for doors with glass panes, openable glass windows and sliding glass doors

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9(Integrity, Insulation, Radiation)	-	450000		-

-
Included w.e.f. 06.11.2025

IS 16945 (2018)

Fire resistance test for glass walls

425000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation, Radiation)	-	425000		-

-
Included w.e.f. 06.11.2025

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Cl. No. 5.10 of IC 15298(P-1):2015)	-	1500	-
8.2(Cl. No. 5.10 of IC 15298(P-1):2015)	-	1500	-
Cl-6.2(Design)	-	150	-
Cl-6.3(Size and Fitting)	-	200	-
Cl-6.4(Height of Upper)	-	200	-
Cl-6.5.1(Whole Footwear-Construction)	-	200	-
Cl-6.5.2(Whole Footwear-Ergonomic Feature)	-	500	-
Cl-6.5.3(Whole Footwear-Upper – Outsole Bond Strength)	-	800	-
Cl-6.5.4(Whole Footwear- Slip Resistance)	-	1500	-
Cl-6.5.5(Whole Footwear- Resistance to Fuel Oil)	-	2000	-
Cl-6.5.6(Whole Footwear- Impact Resistance)	-	1200	-
Cl-6.5.7(Whole Footwear- Compression Resistance)	-	1200	-
Cl-6.5.8(Whole Footwear- Resistance to Corrosion)	-	2000	-
Cl-6.6.2(Upper- Material)	-	200	-
Cl-6.6.3(Upper-Tear Strength)	-	800	-
Cl-6.6.4(Upper- Tensile strength)	-	800	-
Cl-6.6.5(Upper- Water Vapour Permeability and Coefficient)	-	1000	-
Cl-6.7.1(Vamp and quarter lining-Material)	-	200	-
Cl-6.7.2(Vamp and quarter lining-Tear strength)	-	800	-
Cl-6.7.3(Vamp and quarter lining-Abrasion resistance)	-	1200	-
Cl-6.7.4(Vamp and quarter lining-Water vapour permeability and coefficient)	-	1000	-
Cl-6.8(Toecaps -Whole toecap)	-	3000	-
Cl-6.9.1(Insole- Material)	-	200	-
Cl-6.9.2(Insole-Thickness)	-	200	-
Cl-6.9.3(Insole- Abrasion resistance)	-	600	-
Cl-6.9.4(Insole- Water absorption and desorption)	-	1000	-
Cl-6.10(Insocks-Thickness)	-	200	-
Cl-6.10.1(Insocks-Material)	-	200	-
Cl-6.10.2(Insocks-Abrasion resistance)	-	1200	-
Cl-6.10.3(Insocks-Water absorption and desorption)	-	1000	-
Cl-6.11(Stiffener)	-	3000	-
Cl-6.12(Tongue -Material)	-	800	-
Cl-6.13(Closing thread-- Properties)	-	1000	-
Cl-6.14.1(Outsole-Material)	-	200	-
Cl-6.14.2, 6.14.3 & 6.14.4(Outsole-Thickness, cleat area and cleat height)	-	200	-
Cl-6.14.5(Outsole-Tear strength)	-	800	-
Cl-6.14.6(Outsole-Abrasion resistance)	-	1000	-
Cl-6.14.7(Outsole-Flexing resistance)	-	1000	-
Cl-6.14.8(Outsole-Interlayer bond strength)	-	800	-
Cl-6.15.1(Laces-Material)	-	200	-
Cl-6.15.2(Laces-Colour Fastness)	-	1000	-
Cl-6.15.3(Laces-Abrasion Resistance)	-	800	-
Cl-6.15.4(Laces-Breaking load)	-	800	-
Cl-7.1, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	Chemical package charges- 25000
Cl-7.2(PVC outsole)	-	3000	-
Cl-8.3(Cold insulation of Sole)	-	1000	-
Cl-8.4(Heat insulation of Sole)	-	1000	-
Cl-10(Marking)	-	200	-
cL-7.1, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.1 Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (x)(pH)	-	800	-
Cl-7.1, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-

-
Included w.e.f. 18.08.2025

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	100	-
5.3(Height)	-	200	-
5.4.2(Ergonomic feature)	-	500	-
5.4.3(Sole bond)	-	800	-
5.4.4(Slip resistance)	-	1500	-
5.4.5(Leak proofness)	-	800	-
5.4.6.1(Toe caps General)	-	200	-
5.4.6.2(Internal length of toecaps)	-	200	-
5.4.6.3(Corrosion resistance)	-	1000	-
5.4.6.4(Impact resistance)	-	1000	-
5.4.6.5(Compression resistance)	-	1000	-
5.4.7(Colour)	-	150	-
5.5.1(Upper material)	-	200	-
5.5.1(Upper Thickness)	-	200	-
5.5.2(Upper tensile strength)	-	800	-
5.5.3(Upper flexing)	-	1200	-
5.5.4(Upper Hardness)	-	500	-
5.6.1(Lining material)	-	200	-
5.6.2(Lining Tear strength)	-	800	-
5.6.3(Lining abrasion)	-	1200	-
5.6.4(Lining adhesion with upper)	-	800	-
5.7.1(Insole material)	-	200	-
5.7.1(Insole thickness)	-	200	-
5.7.2(Insole abrasion)	-	600	-
5.7.3(Water absorption and desorption)	-	1000	-
5.8.2(Eyelets material)	-	200	-
5.8.2(Lace material)	-	200	-
5.8.2(Lace length)	-	200	-
5.8.2(Lace breaking load)	-	800	-
5.9.1(Insock material)	-	200	-
5.9.2(Inscok abrasion resistance)	-	1200	-
5.9.3(Insock water absorption and desorption)	-	1000	-
5.8.2(Closing thread breaking load)	-	800	-
5.11.1(Outsole material)	-	200	-
5.11.1(Outsole thickness)	-	200	-
5.11.2(Outsole density)	-	800	-
5.11.3(Outsole Interlayer bond)	-	800	-
5.11.4(Outsole tear)	-	800	-
5.11.5(Outsole Abrasion)	-	1200	-
5.11.6(Outsole hardness)	-	500	-
5.11.7(Outsole flexing)	-	1200	-
5.4.8.1(Conductive Footwear)	-	1500	-
5.4.8.2(Antistatic Footwear)	-	1500	-
5.4.8.3.2(Penetration resistance)	-	800	-
5.4.8.4(Cut resistance)	-	800	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	2000	-
5.4.8.6(Outsole resistance to fuel oil)	-	1000	-
5.11.8(Outsole cold flex resistance)	-	2000	-
6.1(Volatility)	-	600	-
6.2(Lead content)	-	600	-
Table 1 as per IS 17011 2018(pH)	-	600	Chemical package charges 30000/-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	3000	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	3000	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	3000	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	3000	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	3000	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	3000	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
5.10(Closing Thread (If used))	-	800	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	800	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	800	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.1(Insole thickness)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.8.2(Closing thread breaking load)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
Table 1 as per IS 17011 2018(pH)	-	0	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	0	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	0	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	0	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	0	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	0	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	0	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	0	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	0	-
5.10(Closing Thread (If used))	-	0	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	0	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	0	-

-
Included w.e.f. 12.11.2025 5.5.5 (Upper Cold flex resistance)

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Atharva Laboratories Pvt. Ltd. (C-54), Noida

C-54, Hosiery Complex, Phase-II, Noida-201305, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 atharvalaboratories2@gmail.com

Scope List