BIS - LIMS (Laboratory Information Management System)

Atharva Laboratories Pvt. Ltd. (C-54), Noida

C-54, Hosiery Complex, Phase-II, Noida-201305, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 atharvalaboratories2@gmail.com

Scope List

Reset

56 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 5852 : Part 2 (2019)

Toe Caps for Protection of Feet Ã¢â‚¬â€ Specification Part 2 Non-Metallic Toe Caps

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Internal length)	-	250	-
4.3.2(Width of flange)	-	250	-
4.4(Impact resistance)	-	1500	-
4.5(Compression resistance)	-	1500	-
5.5.2(Effect of high temperature)	-	1500	-
5.5.3(Effect of low temperature)	-	1500	-
5.5.4(Effect of fuel oil)	-	1500	-
6(Marking)	-	250	-
4.3.1(Internal length)	-	0	-
4.3.2(Width of flange)	-	0	-
4.4(Impact resistance)	-	0	-
4.5(Compression resistance)	-	0	-
5.5.2(Effect of high temperature)	-	0	-
5.5.3(Effect of low temperature)	-	0	-
5.5.4(Effect of fuel oil)	-	0	-
6(Marking)	-	0	-
4.3.1(Internal length)	-	-	-
4.3.2(Width of flange)	-	-	-
4.4(Impact resistance)	-	-	-
4.5(Compression resistance)	-	-	-
5.5.2(Effect of high temperature)	-	-	-
5.5.3(Effect of low temperature)	-	-	-
5.5.4(Effect of fuel oil)	-	-	-
6(Marking)	-	-	-

23 Feb, 2029

-
Included w.e.f. 21.08.2025

IS 5852 : Part 1 (2019)

Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4.1(Finishing)	-	250	-
4.2.1 - 1(Minimum internal length in mm)	-	250	-
4.2.2(Width of Flange)	-	250	-
4.3(Impact Resistance)	-	1500	-
4.4(Compression Resistance)	-	1500	-
4.5(Corrosion Resistance)	-	1000	-
5(Marking)	-	250	-
6(Packing)	-	250	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4.1(Finishing)	-	0	-
4.2.1 - 1(Minimum internal length in mm)	-	0	-
4.2.2(Width of Flange)	-	0	-
4.3(Impact Resistance)	-	0	-
4.4(Compression Resistance)	-	0	-
4.5(Corrosion Resistance)	-	0	-
5(Marking)	-	0	-
6(Packing)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4.1(Finishing)	-	-	-
4.2.1 - 1(Minimum internal length in mm)	-	-	-
4.2.2(Width of Flange)	-	-	-
4.3(Impact Resistance)	-	-	-
4.4(Compression Resistance)	-	-	-
4.5(Corrosion Resistance)	-	-	-
5(Marking)	-	-	-
6(Packing)	-	-	-

23 Feb, 2029

-
Included w.e.f. 21.08.2025

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

SHOES – SPECIFICATION, PART 2 SHOES FOR GENERAL PURPOSE

39999 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	150	-
Cl-5.3(Material)	-	500	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	800	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	800	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	800	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	800	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	1000	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	30000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	1000	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	800	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1000	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	800	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	1000	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	1200	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	800	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1000	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	800	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	800	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	800	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	1000	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	1200	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	2000	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1000	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	800	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1000	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	800	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	800	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	1200	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	800	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	250	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	1000	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1000	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	800	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	500	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	800	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	1000	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	500	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	500	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	1000	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	800	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	1000	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	800	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	800	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	800	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	800	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	800	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	800	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	1000	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	800	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	1000	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	800	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	800	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	800	-
Cl-8.1(Marking)	-	0	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	800	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	800	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	800	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	800	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	800	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	800	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Shoes: Shoes for General Purpose(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.1.4.1 of IS 17011(DMFU)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(pH)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	0	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	0	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	0	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	0	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o- aminoazotoluene)	-	0	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	0	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	0	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	0	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	0	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	0	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	0	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	0	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	0	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	0	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	0	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	0	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	0	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	0	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	0	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	0	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	0	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	0	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	0	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	0	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	0	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	0	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	0	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	0	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	0	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	0	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	0	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	0	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	0	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	0	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	0	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	0	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	0	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	0	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	0	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	0	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	0	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	0	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-

23 Feb, 2029

-
Included w.e.f. 30.07.2025 Exclusion: "Cl-6.1.2, Table-3 (i) (Colour fastness to light, Marring, Min) Cl-6.1.4, Table-5 (i) (Colour fastness to light, Marring, Min)"

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

42950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	150	-
Cl-4.3.1(Size)	-	150	-
Cl-4.3.2(Weight)	-	250	-
Cl-4.4(Height of Upper)	-	250	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	800	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	1500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	1500	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	1200	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1200	-
Cl-4.6.1(Material)	-	500	-
Cl-4.6.2(Tear Strength)	-	800	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1200	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	500	-
Cl-4.7.2(Tear Strength)	-	800	-
Cl-4.7.3(Abrasion Resistance)	-	1000	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1200	-
Cl. 4.8.1(Material)	-	500	-
Cl-4.8.2(Abrasion Resistance)	-	850	-
Cl-4.8.3(Water Absorption and Desorption)	-	850	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	500	-
Cl-4.11.1(Material)	-	500	-
Cl-4.11.2(Tear Strength)	-	800	-
Cl-4.12(Closing Thread)	-	800	-
Cl-4.13.2(Thickness)	-	500	-
Cl-4.13.3(Moulded Density)	-	800	-
Cl-4.13.4(Hardness)	-	800	-
Cl-4.13.5(Ageing Test)	-	1200	-
Cl-4.13.6(Tear Strength)	-	800	-
Cl-4.13.7(Abrasion Resistance)	-	1000	-
Cl-4.13.8(Flexing Resistance)	-	1000	-
Cl-4.14(Eyelet)	-	1300	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	1600	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1000	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	800	-
Cl.4.5.3.2(Interlayer bond strength)	-	800	-
Cl-4.9.1(Material)	-	500	-
Cl-4.9.2(Water Absorption and Desorption)	-	850	-
Cl-4.13.1(Material)	-	500	-
Cl-4.15.1(Material)	-	500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
4.9 Insocks(Insock thickness)	-	500	-

23 Feb, 2029

-
Included w.e.f 04.08.2025

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	150	-
Cl 5.2.2, Table 4(" Height of upper ")	-	250	-
Cl 5.2.3(Heel area)	-	250	-
Cl 5.3.1.1(Construction of whole footwear)	-	150	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	800	-
Cl 5.3.2.1(Toe protection - general)	-	250	-
Cl 5.3.2.2(Internal length)	-	800	-
Cl 5.3.2.3(Width of toecap flange)	-	250	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	2500	-
Cl 5.3.2.6(Impact resistance)	-	1200	-
Cl 5.3.2.7(Compression resistance)	-	1200	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
Cl 5.3.7(Seam strength)	-	800	-
Cl 5.3.8(Lead Content ( National Annex A))	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	250	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	250	-
Cl 5.4.2(Thickness)	-	250	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.5(Flexing resistance)	-	1200	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1200	-
Cl 5.4.7(Resistance to hydrolysis)	-	2000	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	250	-
Cl 5.7.2(Water permeability of insock)	-	500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	850	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	850	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	250	-
Cl 5.8.2.2(Cleated area)	-	250	-
Cl 5.8.2.3(Cleat height)	-	250	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2000	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	150	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	250	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	2000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1200	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	150	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	150	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	150	-
Cl 6.2.8.3(Resistance to cutting)	-	1200	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1200	-
Cl 6.4.3.2(Design of Ladder grip)	-	250	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	250	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7, Table 20("Marking ")	-	150	-

23 Feb, 2029

-
Included w.e.f. 11.09.2025 Exclusion: Cl 6.2.7 (Ankle protection)

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

71000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	600	-
5(DESIGN)	-	150	-
6(SIZE AND FITTINGS)	-	250	-
7.1.1(Whole Footwear)	-	250	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	800	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	800	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	800	-
7.1.5(Energy Absorption at Seat Region)	-	1000	-
7.1.6(Complete Shoe Flexing)	-	1500	-
7.1.7(Washability)	-	0	-
7.1.8(Slip Resistance)	-	1500	-
7.1.9(Heel Drop)	-	250	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1200	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	800	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	1500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	600	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	600	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	800	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	0	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	800	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	800	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	1000	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1000	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	800	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	800	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	800	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	800	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1200	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	600	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	600	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	2000	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	0	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	1200	-
7.3 , Table No. 4 , i)(Tear strength,)	-	800	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	1200	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	1500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	1500	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	600	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	600	-
7.4 , Table No. 5 , i)(Thickness)	-	250	-
7.4 , Table No. 5 , ii)(Flexing index)	-	1000	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	850	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	850	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	850	-
7.5 , Table No. 6 , i)(Thickness)	-	250	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	1000	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	850	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	850	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	1200	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	1000	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1200	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2000	-
7.6 , Table No. 7 , iv)(Tear strength)	-	800	-
7.6 , Table No. 7 , v)(Tensile strength)	-	800	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	800	-
7.6 , Table No. 7 , vii)(Compression set)	-	600	-
7.7 , Table No. 8 , i)(Compression set)	-	600	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	850	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	1000	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	800	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	800	-
7.8 , Table No. 9 , ii)(Resilience)	-	800	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	800	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	800	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	800	-
7.8 , Table No. 9 , v)(Peel strength)	-	800	-
7.9 , Table No. 10 , i)(Peel strength)	-	800	-
7.9 , Table No. 10 , ii)(Shear strength)	-	800	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	800	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	800	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	800	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	800	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	800	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	1500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	800	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	1000	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	30000	-
8(MARKING AND PACKING)	-	150	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2500	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	3000	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	3000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	500	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	3000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3000	-
7.12.2 (Amendment 1)(Lead content)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	3000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	500	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	500	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	500	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	500	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	500	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	500	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	500	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	500	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	500	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	500	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	500	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	500	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	500	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	500	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	500	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	500	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	500	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	500	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	500	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	500	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	500	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	500	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	500	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	500	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	500	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	500	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	500	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	500	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	500	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	500	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	500	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	500	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	500	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	500	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	500	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	500	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	500	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	500	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	500	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	500	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	500	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	500	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	500	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	500	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	500	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	500	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	500	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	500	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	500	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	500	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	500	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	500	-

23 Feb, 2029

-
Included w.e.f 18.08.2025 Exclusion: Cl 7.1.7 (Washability), Cl 7.2 , Table No. 2 , vi) ("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)"), Cl 7.2 , Table No. 3 , viii) (Colour fastness to light grey scale rate)

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.2.2(SIZE (width))	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.2.2(SIZE (Height))	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.3.2(SIZE (width))	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.3.2(SIZE (Height))	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.4.2(SIZE (width))	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.4.2(SIZE (Height))	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.5.2(SIZE (width))	-	0	Installation of sample to be done by client itself at our facility.
Cl 7.5.2(SIZE (Height))	-	0	Installation of sample to be done by client itself at our facility.
7.3.1(MOISTURE CONTENT)	-	0	Installation of sample to be done by client itself at our facility.
7.2.7(Vision Pane (Uninsulated door) Width)	-	0	Installation of sample to be done by client itself at our facility.
7.2.7(Vision Pane (Uninsulated door) Height)	-	0	Installation of sample to be done by client itself at our facility.
7.2.7(Vision Pane (Insulated door) Width)	-	0	Installation of sample to be done by client itself at our facility.
7.2.7(Vision Pane (Insulated door) Height)	-	0	Installation of sample to be done by client itself at our facility.
7.3.4(Vision Pane (Width))	-	0	Installation of sample to be done by client itself at our facility.
7.3.4(Vision Pane (Height))	-	0	Installation of sample to be done by client itself at our facility.
Cl-7.2.1(Material)	-	0	-
Cl-7.2.4(Fire Door Frames)	-	0	-
Cl-7.2.5(Door Leaf)	-	0	-
Cl-7.2.8(Louvres)	-	0	-
Cl-7.2.9(Builder’s Hardware)	-	0	Certified details provided by the Client/ Manufacturer
Cl-7.4.3(Construction)	-	0	Details provided by the Client/Manufacturer.
Cl-7.4.5(Operator)	-	0	Certified details provided by the manufacturer/Client.
Cl-7.5.1(Material)	-	0	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	0	-
Cl-11.3.1(Walls)	-	0	-
Cl-11.4.1(Closing Devices)	-	0	-
Cl-11.4.2(Releasing Devices)	-	0	-
Cl-11.4.3(Hardware)	-	0	Hardware related Certified details provided by the manufacturer/client.
Cl-6(VISION PANE ON FIRE DOORS)	-	0	-
Cl-7.2.3(Construction)	-	0	-
Cl-7.2.6(Intumescent Seal)	-	0	-
Cl-7.3.6(Builder’s Hardware)	-	0	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	0	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	0	-
Cl-7.6(General Requirement of Fire Doors)	-	0	-
Cl-7.3.3(Construction)	-	0	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	0	-
4(Integrity, Insulation)	-	0	-
Cl 7.2.2(SIZE (width))	-	0	-
Cl 7.2.2(SIZE (Height))	-	0	-
Cl 7.3.2(SIZE (width))	-	0	-
Cl 7.3.2(SIZE (Height))	-	0	-
Cl 7.4.2(SIZE (width))	-	0	-
Cl 7.4.2(SIZE (Height))	-	0	-
Cl 7.5.2(SIZE (width))	-	0	-
Cl 7.5.2(SIZE (Height))	-	0	-
7.3.1(MOISTURE CONTENT)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	0	-
7.2.7(Vision Pane (Insulated door) Width)	-	0	-
7.2.7(Vision Pane (Insulated door) Height)	-	0	-
7.3.4(Vision Pane (Width))	-	0	-
7.3.4(Vision Pane (Height))	-	0	-
Cl-7.2.1(Material)	-	0	-
Cl-7.2.4(Fire Door Frames)	-	0	-
Cl-7.2.5(Door Leaf)	-	0	-
Cl-7.2.8(Louvres)	-	0	-
Cl-7.2.9(Builder’s Hardware)	-	0	-
Cl-7.4.3(Construction)	-	0	-
Cl-7.4.5(Operator)	-	0	-
Cl-7.5.1(Material)	-	0	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	0	-
Cl-11.3.1(Walls)	-	0	-
Cl-11.4.1(Closing Devices)	-	0	-
Cl-11.4.2(Releasing Devices)	-	0	-
Cl-11.4.3(Hardware)	-	0	-
Cl-6(VISION PANE ON FIRE DOORS)	-	0	-
Cl-7.2.3(Construction)	-	0	-
Cl-7.2.6(Intumescent Seal)	-	0	-
Cl-7.3.6(Builder’s Hardware)	-	0	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	0	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	0	-
Cl-7.6(General Requirement of Fire Doors)	-	0	-
Cl-7.3.3(Construction)	-	0	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	0	-
4(Integrity, Insulation)	-	-	-
Cl 7.2.2(SIZE (width))	-	-	-
Cl 7.2.2(SIZE (Height))	-	-	-
Cl 7.3.2(SIZE (width))	-	-	-
Cl 7.3.2(SIZE (Height))	-	-	-
Cl 7.4.2(SIZE (width))	-	-	-
Cl 7.4.2(SIZE (Height))	-	-	-
Cl 7.5.2(SIZE (width))	-	-	-
Cl 7.5.2(SIZE (Height))	-	-	-
7.3.1(MOISTURE CONTENT)	-	-	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	-	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	-	-
7.2.7(Vision Pane (Insulated door) Width)	-	-	-
7.2.7(Vision Pane (Insulated door) Height)	-	-	-
7.3.4(Vision Pane (Width))	-	-	-
7.3.4(Vision Pane (Height))	-	-	-
Cl-7.2.1(Material)	-	-	-
Cl-7.2.4(Fire Door Frames)	-	-	-
Cl-7.2.5(Door Leaf)	-	-	-
Cl-7.2.8(Louvres)	-	-	-
Cl-7.2.9(Builder’s Hardware)	-	-	-
Cl-7.4.3(Construction)	-	-	-
Cl-7.4.5(Operator)	-	-	-
Cl-7.5.1(Material)	-	-	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	-	-
Cl-11.3.1(Walls)	-	-	-
Cl-11.4.1(Closing Devices)	-	-	-
Cl-11.4.2(Releasing Devices)	-	-	-
Cl-11.4.3(Hardware)	-	-	-
Cl-6(VISION PANE ON FIRE DOORS)	-	-	-
Cl-7.2.3(Construction)	-	-	-
Cl-7.2.6(Intumescent Seal)	-	-	-
Cl-7.3.6(Builder’s Hardware)	-	-	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	-	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	-	-
Cl-7.6(General Requirement of Fire Doors)	-	-	-
Cl-7.3.3(Construction)	-	-	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	-	-

23 Feb, 2029

-
Included w.e.f. 06.11.2025

IS 16107 : Part 2 : Sec 1 (2012)

Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(LED Luminaire Life)	-	60000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	4000	-
8(Light Output)	-	4000	-
7(Total Input Power)	-	4000	-

23 Feb, 2029

-
Included w.e.f. 11.09.2025

IS 16106 (2012)

Method of electrical and photometric measurements of solid state lighting (Led) products

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Power supply characteristics)	-	500	-
6(Seasoning (Ageing) of SSL products)	-	500	-
7(Stabilization of SSL products)	-	500	-
8(Operating orientation)	-	500	-
9(Electrical settings)	-	500	-
10(Electrical instrumentation)	-	500	-
11(Test methods for total luminous flux measurement)	-	3000	-
12(Luminous intensity distribution)	-	3000	-
13(Luminous efficacy)	-	3000	-
14(Test methods for colour characteristics of SSL products)	-	3000	-
15(Uncertainty statement)	-	1000	-
16(Test report)	-	1000	-
5(Power supply characteristics)	-	0	-
6(Seasoning (Ageing) of SSL products)	-	0	-
7(Stabilization of SSL products)	-	0	-
8(Operating orientation)	-	0	-
9(Electrical settings)	-	0	-
10(Electrical instrumentation)	-	0	-
11(Test methods for total luminous flux measurement)	-	0	-
12(Luminous intensity distribution)	-	0	-
13(Luminous efficacy)	-	0	-
14(Test methods for colour characteristics of SSL products)	-	0	-
15(Uncertainty statement)	-	0	-
16(Test report)	-	0	-

23 Feb, 2029

-
Included w.e.f. 29.10.2025

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1500	-
8(Protection against accidental contact with live parts)	-	1500	-
9(Terminals)	-	3500	-
10(PROVISION FOR EARTHING)	-	4000	-
11(MOISTURE RESISTANCE)	-	4000	-
12(Electric Strength)	-	3000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	3000	-
15(Transformer heating)	-	5000	-
16(Construction)	-	3000	-
17(Creepage distance and clearances)	-	3500	-
18(Screws, current carrying parts and connections)	-	4000	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	3000	-
16(Enclosures)	-	0	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	0	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	0	-
9(TERMINALS)	-	0	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	0	-
11(MOISTURE RESISTANCE AND INSULATION)	-	0	-
12(ELECTRIC STRENGTH)	-	0	-
14(FAULT CONDITIONS)	-	0	-
15(TRANSFORMER HEATING)	-	0	-
16(CONSTRUCTION)	-	0	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	0	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	0	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
20(RESISTANCE TO CORROSION)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-

23 Feb, 2029

-
Included w.e.f. 30.07.2025 Exclusion: Exclusions : 16 (EMI/EMC filter), (Bridging resistor in primary circuit), (Capacitor and RC units), (RF suppression (X-Y capacitors)), (Inductor), (MOV/VDR), (SMPS /Mains Transformer), (PCB material), (Insulated tape), (Heat shrinkage sleeve), (Connector), (Fuse), (Internal wire), (LED), (Opto-coupler), (Opto-coupler), (Enclosures), (Winding wire), (Thin sheet materials), 19 (Metal base PCB for LED), (Transparent cover), (Bobbin)

IS 16103 : Part 2 (2012)

Led modules for general lighting: Part 2 performance requirements

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Test for Emission (Radiated and Conducted) of radio frequency distribution)	-	0	(In Exclusion)
12(Information for Luminaire design)	-	2000	-
10(LED Module Life)	-	65000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	2000	-
8(Light Output)	-	8000	-
7(Module Power)	-	2000	-
6(Dimensions)	-	1000	-

23 Feb, 2029

-
Included w.e.f. 11.09.2025 Exclusion: 13 (Test for Emission (Radiated and Conducted) of radio frequency distribution)

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	3000	-
8(Terminals)	-	2000	-
9(PROVISION FOR EARTHING)	-	5000	-
10(Protection against accidental contact with live parts)	-	4000	-
11(Mositure Resistance and Insulation)	-	5000	-
12(Electric Strength)	-	4000	-
13(Fault conditions)	-	6000	-
15(Construction)	-	2000	-
16(Creepage distance and clearances)	-	2000	-
17(Screws, current carrying parts and connections)	-	2000	-
18(Resistance to heat, fire and tracking)	-	6000	-
19(Resistance to corrosion)	-	5000	-
21(Heat management)	-	1000	-
21(Heat management)	-	-	-

23 Feb, 2029

-
Included w.e.f. 11.09.2025

IS 16102 : Part 2 (2017)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Lamp Life)	-	90000	-
10(Colour Nomenclature, Variation and Rendering)	-	0	-
9(light output)	-	12000	-
8(Lamp Input)	-	2000	-
6(Dimensions)	-	1000	-
4(GENERAL REQUIREMENTS ON TESTS)	-	1000	-
5(MARKING)	-	3000	-
7(TEST CONDITIONS)	-	0	-
8.1(Lamp Power)	-	0	-
8.2(Power Factor)	-	0	-
8.3(Harmonics)	-	0	-
8.4(Emission of Radio Frequency Disturbances)	-	0	-
9.1(Luminous Flux)	-	0	-
9.2(Luminous Intensity Distribution, Peak Intensity and Beam Angle)	-	0	-
12(DIMMING)	-	0	-
13(VERIFICATION)	-	2000	-
14(TESTS)	-	0	-
Annex A(METHOD OF MEASURING LAMP CHARACTERISTICS)	-	0	-
Annex B(EXPLANATION OF THE PHOTOMETRIC CODE)	-	0	-
11(Lamp Life)	-	-	-
10(Colour Nomenclature, Variation and Rendering)	-	-	-
9(light output)	-	-	-
8(Lamp Input)	-	-	-
6(Dimensions)	-	-	-
4(GENERAL REQUIREMENTS ON TESTS)	-	-	-
5(MARKING)	-	-	-
7(TEST CONDITIONS)	-	-	-
8.1(Lamp Power)	-	-	-
8.2(Power Factor)	-	-	-
8.3(Harmonics)	-	-	-
8.4(Emission of Radio Frequency Disturbances)	-	-	-
9.1(Luminous Flux)	-	-	-
9.2(Luminous Intensity Distribution, Peak Intensity and Beam Angle)	-	-	-
12(DIMMING)	-	-	-
13(VERIFICATION)	-	-	-
14(TESTS)	-	-	-
Annex A(METHOD OF MEASURING LAMP CHARACTERISTICS)	-	-	-
Annex B(EXPLANATION OF THE PHOTOMETRIC CODE)	-	-	-

23 Feb, 2029

-
Included w.e.f 04.09.2025 Exclusion: Cl 8.4 (Emission of Radio Frequency Disturbances)

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

44000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	10% discount to BIS
6(Interchangeability)	-	2000	10% discount to BIS
7(Protection against accidental contact with live parts)	-	8000	10% discount to BIS
8(Insulation Resistance and Electric Strength)	-	8000	10% discount to BIS
9(MECHANICAL STRENGTH)	-	5000	10% discount to BIS
10(cap temperature)	-	8000	10% discount to BIS
11(Resistance to Heat)	-	4000	10% discount to BIS
12(Resistance to Flame and Ignition)	-	4000	10% discount to BIS
13(Fault conditions)	-	3000	10% discount to BIS
14(Creepage distance and clearances)	-	2000	10% discount to BIS
4(General requirement and General test requirements)	-	0	10% discount to BIS
5(Marking)	-	0	Repeated
6(Interchangeability)	-	0	Repeated
7(Protection against accidental contact with live parts)	-	0	Repeated
8(Strength after humidity treatment)	-	1000	10% discount to BIS
9(Mechanical strength)	-	0	Repeated
10(Cap temperature rise)	-	0	Repeated
11(Resistance to heat)	-	0	Repeated
12(Resistance to flame and ignition)	-	0	Repeated
13(Fault conditions)	-	0	Repeated
14(Creepage distances and clearances)	-	0	Repeated
15(Selection of lamps for tests (Sampling))	-	5000	10% discount to BIS
16(Condition of compliance)	-	4000	10% discount to BIS
17(Tests)	-	1000	10% discount to BIS
Annex A(Ovreview of systems composed of LED modules and control gear)	-	1000	10% discount to BIS
Annex B(Lamps with operating position limitations)	-	1000	10% discount to BIS
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	1000	10% discount to BIS

23 Feb, 2029

-
Included w.e.f. 30.07.2025

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	0	-
21.5(Classification of Luminaires')	-	2000	-
21.6(Marking)	-	1000	-
21.7(Construction)	-	15000	-
21.8(Creepage Distance and Clearances)	-	1000	-
21.9(Provision for earthing)	-	2000	-
21.10(Terminals)	-	1000	-
21.11(External & Internal Wiring)	-	1000	-
21.12(Protection against electric shock)	-	1000	-
21.13(Endurance Tests and Thermal Tests)	-	1000	-
21.14(Resistance to Dust & Moisture)	-	1000	-
21.15(Insulation Resistance and Electric Strength)	-	2000	-
21.16(Resistance to Heat , fire and tracking)	-	3000	-
21.7.1(General)	-	0	-
21.7.3(Terminals and supply connections)	-	0	-
21.7.4(Control units)	-	0	-
21.7.5(Mechanical strength)	-	0	-
21.4(General Test Requireements)	-	-	-
21.5(Classification of Luminaires')	-	-	-
21.6(Marking)	-	-	-
21.7(Construction)	-	-	-
21.8(Creepage Distance and Clearances)	-	-	-
21.9(Provision for earthing)	-	-	-
21.10(Terminals)	-	-	-
21.11(External & Internal Wiring)	-	-	-
21.12(Protection against electric shock)	-	-	-
21.13(Endurance Tests and Thermal Tests)	-	-	-
21.14(Resistance to Dust & Moisture)	-	-	-
21.15(Insulation Resistance and Electric Strength)	-	-	-
21.16(Resistance to Heat , fire and tracking)	-	-	-
21.7.1(General)	-	-	-
21.7.3(Terminals and supply connections)	-	-	-
21.7.4(Control units)	-	-	-
21.7.5(Mechanical strength)	-	-	-

23 Feb, 2029

-
Included w.e.f. 26.09.2025 Exclusion: 21.7 (Construction)

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	4000	-
5(Classification of Luminaires')	-	4000	-
6.0(Marking)	-	4000	-
7.0(Construction)	-	6000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	3000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	4000	-
13.0(Endurance Tests and Thermal Tests)	-	10000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	6000	-
17.0(Functional Safety)	-	6000	-
18.0(Changeover Operation)	-	6000	-
19.0(High Temperature Operation)	-	6000	-
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	6000	-
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	1000	-
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	1000	-

23 Feb, 2029

-
Included w.e.f 18.08.2025 Exclusion: Clause 4.24 as per IS 10322 Part 1 (UV Radiation), Clause 4.26 as per IS 10322 Part 1 (Short Circuit Protection)

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

44000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	4000	-
20.5(Classification of Luminaires')	-	4000	-
20.6(Marking)	-	4000	-
20.7(Construction)	-	5000	-
20.8(Creepage Distance and Clearances)	-	3000	-
20.9(Provision for earthing)	-	6000	-
20.10(Terminals)	-	3000	-
20.11(External & Internal Wiring)	-	3000	-
20.12(Protection against electric shock)	-	3000	-
20.13(Endurance Tests and Thermal Tests)	-	8500	-
20.14(Resistance to Dust & Moisture)	-	6000	-
20.15(Insulation Resistance and Electric Strength)	-	4000	-
20.16(Resistance to Heat , fire and tracking)	-	5000	-
20.4(General Test Requireements)	-	-	-
20.5(Classification of Luminaires')	-	-	-
20.6(Marking)	-	-	-
20.7(Construction)	-	-	-
20.8(Creepage Distance and Clearances)	-	-	-
20.9(Provision for earthing)	-	-	-
20.10(Terminals)	-	-	-
20.11(External & Internal Wiring)	-	-	-
20.12(Protection against electric shock)	-	-	-
20.13(Endurance Tests and Thermal Tests)	-	-	-
20.14(Resistance to Dust & Moisture)	-	-	-
20.15(Insulation Resistance and Electric Strength)	-	-	-
20.16(Resistance to Heat , fire and tracking)	-	-	-

23 Feb, 2029

-
Included w.e.f 18.08.2025 Exclusion: Clause 4.24 as per IEC 60598- 1 (UV Radiation), Clause 4.26 as per IEC 60598- 1 (Short Circuit Protection)

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Packing -Each Package shall bear the following Particulars)	-	4000	-
4(General Test Requireements)	-	4000	-
5(Classification of Luminaires')	-	3000	-
6.0(Marking)	-	3000	-
7.0(Construction)	-	6000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	0	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	4000	-
13.0(Endurance Tests and Thermal Tests)	-	8500	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
8.2(Packing -Each Package shall bear the following Particulars)	-	-	-

23 Feb, 2029

-
Included w.e.f 18.08.2025 Exclusion: Clause 4.24 as per IEC 60598- 1 (UV Radiation), Clause 4.26 as per IEC 60598- 1 (Short Circuit Protection)

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

44000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	4000	-
5(Classification of Luminaires')	-	4000	-
6.0(Marking)	-	4000	-
7.0(Construction)	-	6000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	5000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	4000	-
13.0(Endurance Tests and Thermal Tests)	-	8500	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	3000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Photometric Test)	-	12000	-

23 Feb, 2029

-
Included w.e.f 18.08.2025 Exclusion: Clause 4.24 as per IEC 60598- 1 (UV Radiation), Clause 4.26 as per IEC 60598- 1 (Short Circuit Protection)

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

38990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	-
5(Classification of Luminaires')	-	500	-
6.0(Marking)	-	1000	-
7.0(Construction)	-	2500	-
8.0(Creepage Distance and Clearances)	-	2500	-
9.0(Provision for earthing)	-	1990	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2500	-
12.0(Protection against electric shock)	-	1500	-
13.0(Endurance Tests and Thermal Tests)	-	3000	-
14.0(Resistance to Dust & Moisture)	-	4500	-
15.0(Insulation Resistance and Electric Strength)	-	2500	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	12000	-

23 Feb, 2029

-
Included w.e.f 18.08.2025 Exclusion: Clause 4.24 as per IEC 60598- 1 (UV Radiation), Clause 4.26 as per IEC 60598- 1 (Short Circuit Protection)

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

38990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	-
5(Classification of Luminaires')	-	500	-
6.0(Marking)	-	1000	-
7.0(Construction)	-	2500	-
8.0(Creepage Distance and Clearances)	-	2500	-
9.0(Provision for earthing)	-	1500	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2500	-
12.0(Protection against electric shock)	-	1500	-
13.0(Endurance Tests and Thermal Tests)	-	3000	-
14.0(Resistance to Dust & Moisture)	-	4500	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	12000	-
(Cl.4.24) (Annex-P)(UV Radiations for metal halide lamps)	-	490	-
4.26.2(Short Circuit Protection)	-	500	-
4(General Test Requireements)	-	-	-
5(Classification of Luminaires')	-	-	-
6.0(Marking)	-	-	-
7.0(Construction)	-	-	-
8.0(Creepage Distance and Clearances)	-	-	-
9.0(Provision for earthing)	-	-	-
10.0(Terminals)	-	-	-
11.0(External & Internal Wiring)	-	-	-
12.0(Protection against electric shock)	-	-	-
13.0(Endurance Tests and Thermal Tests)	-	-	-
14.0(Resistance to Dust & Moisture)	-	-	-
15.0(Insulation Resistance and Electric Strength)	-	-	-
16.0(Resistance to Heat , fire and tracking)	-	-	-
17.0(Photometric Test)	-	-	-
(Cl.4.24) (Annex-P)(UV Radiations for metal halide lamps)	-	-	-
4.26.2(Short Circuit Protection)	-	-	-

23 Feb, 2029

-
Included w.e.f 18.08.2025 Exclusion: (Cl.4.24) (Annex-P) (UV Radiations for metal halide lamps), 4.26.2 (Short Circuit Protection)

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

43990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	-
5(Classification of Luminaires')	-	2500	-
6(Marking)	-	2000	-
7(Construction)	-	2490	-
8(Creepage Distance and Clearances)	-	2500	-
9(Provision for earthing)	-	2500	-
10(Terminals)	-	2500	-
11(External & Internal Wiring)	-	2500	-
12(Protection against electric shock)	-	2500	-
13(Endurance Tests and Thermal Tests)	-	2500	-
14(Resistance to Dust and Moisture)	-	2500	-
15(Insulation Resistance and Electric Strength)	-	2500	-
16(Resistance to Heat , fire and tracking)	-	2500	-
17(Photometric Test)	-	12000	-

23 Feb, 2029

-
Included w.e.f 11.08.2025

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

80000 View breakup
Rs.80,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1500	Ok
5(General Safety Considerations)	-	500	Ok
5.1(General)	-	1000	Ok
5.2(Insulation and Wiring)	-	2000	Ok
5.3(Venting)	-	2000	Ok
5.4(Temperature, Voltage and Current Management)	-	2000	Ok
5.5(Terminal Contacts)	-	500	Ok
5.6(Assembly of Cells into batteries)	-	2000	Ok
5.7(Quality Plan)	-	500	Ok
6(Tyoe Test amd Sample Size)	-	1500	Ok
7(Specific requirements and tests)	-	2000	Ok
7.1(Charging procedure for test purposes)	-	2000	Ok
7.2(Intended Use)	-	32500	Ok
7.3(Reasonably foreseeable misuse)	-	21000	Ok
8(Information for safety)	-	1000	Ok
8.1(General)	-	1000	Ok
8.2(Small Cell and battery safety information)	-	1000	Ok
9(Marking)	-	1000	Ok
9.1(Cell Marking)	-	1000	Ok
9.2(Battery Marking)	-	1000	Ok
9.3(Caution for ingestion of small cells and batteries)	-	1000	Ok
9.4(Other information)	-	1000	Ok
10(Packaging)	-	1000	Ok

23 Feb, 2029

-
REVISED VERSION INCLUDED w.e.f. 02.04.2019.

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	0	N/A
1.6(Power interface .)	-	5900	Cl.1.6 Power interface & Cl.1.6.1 AC Power Distribution System 500 Cl.1.6.2 Input Current 5000 Cl.1.6.3 Voltage limit of hand-held Equipment 200 Cl.1.6.4 Neutral Conductor 200
1.7(Markings and instructions)	-	1100	i) Cl.1.7 to xv) Cl.1.7.14
2.1(Protection from electric shock and energy hazards)	-	2400	Cl. 2 to Cl.2.1.3
2.2(SELV circuits)	-	200	Cl.2.2, Cl.2.2.1, Cl.2.2.2, Cl.2.2.3, & Cl.2.2.4, SELV Circuits 200
2.3(TNV circuits)	-	200	N/A
2.4(Limited current circuits)	-	1000	Cl.2.4, Cl.2.4.1, Cl.2.4.2, & Cl.2.4.3, Limited Current circuits 1000
2.5(Limited power sources .)	-	1000	Cl.2.5, Limited power sources 1000
2.6(Provisions for earthing and bonding)	-	3200	Cl.2.6 to Cl.2.6.5.8
2.7(Overcurrent and earth fault protection in primary circuits)	-	1400	Cl.2.7 to Cl.2.7.6
2.8(Safety interlocks)	-	200	N/A
2.9(Electrical insulation)	-	800	Cl.2.9 Electric insulation 200 Cl.2.9.1 & Cl.2.9.2 Properties of Insulating materials, Humidity Conditioning. 200 Cl.2.9.3 Grade of insulation 200 Cl.2.9.4 Separation from Hazardous voltages 200
2.10(Clearances, creepage distances and distances through insulation)	-	5800	Cl.2.10 to Cl.2.10.10
3.1(General)	-	1400	Cl.3,Cl.3.1,Cl.3.1.1,&Cl.3.1.1 to Cl.3.1.10
3.2(Connection to a mains supply)	-	1600	Cl. 3.2, Cl.3.2.1,& Cl.3.2..1.1,Cl.3.2.1.2 to Cl.3.2.9
3.3(Wiring terminals for connection of external conductors)	-	600	Cl.3.3 to Cl.3.3.8
3.4(Disconnection from the mains supply)	-	200	Cl.3.4 , Disconnection from the mains supply 200
3.5(Interconnection of equipment)	-	200	Cl.3.5 Interconnection of Equipments 200
4.1(Stability)	-	200	Cl.4 Physical Requirements, Cl.4.1 Stability 200
4.2(Mechanical strength)	-	1000	Cl.4.2 to Cl.4.2.10
4.3(Design and construction)	-	1400	Cl.4.3 to Cl.4.3.13.5
4.4(Protection against hazardous moving parts)	-	200	Cl.4.4 Protection against Hazardous Moving Parts 200
4.5(Thermal requirements)	-	400	Cl.4.5 Cl.4.5.1 Cl.4.5.2 Cl.4.5.3 Cl.4.5. Thermal Requirements General Temperature Test Temperature limits for Materials 4 Touch Temperature Limits 200 Cl.4.5.5 Resistance to abnormal Heat 200
4.6(Openings in enclosures)	-	600	Cl.4.6,Cl.4.6.1, & Cl.4.6.3 Openings in enclosures 200 Cl.4.6.4 Openings in transportable equipment 200 Cl.4.6.5 Adhesives for constructional purposes 200
4.7(Resistance to fire)	-	1800	Cl.4.7 to Cl.4.7.3.6
5.1(Touch current and protective conductor curren)	-	200	Cl.5, & Cl.5.1 Electrical Requirements and simulated abnormal conditions & Touch current and protective conductor current & Annex D 200
5.2(Electric strength)	-	1000	Cl.5.2 Electric Strength Test 1000
5.3(Abnormal operating and fault conditions)	-	1200	Cl.5.3, Cl.5.3.1 to Cl.5.3.9.2
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2500	Cl.6.0 to Cl.6.1.2.2
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	600	Cl.6.2 to Cl.6.2.2.2 & Cl.6.2.2.3
6.3(Protection of the telecommunication wiring system from overheating)	-	200	Cl.6.3 Protection of the telecommunication wiring system from overheating 200
7.1(General)	-	200	Cl.7,& Cl.7.1 Connection to cable distribution system,& General 200
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	200	Cl.7.2 Protection of cable distribution system service persons, and user of other equipment connected to the system ,from hazardous voltage in the equipment 200
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	200	Cl.7.3 Protection of equipment users from over voltages on the cable distribution system 200
7.4(Insulation between primary circuits and cable distribution systems)	-	400	Cl.7.4 & Cl.7.4.1 Insulation between primary circuits and cable distribution system and General 200 Cl.7.4.2 Voltage Surge Test 200 Cl.7.4.3 Impulse Test 200
4.2.8(Cathode Ray Tubes)	-	100	Ok
4.3.10(Dust, powders, liquids and gases)	-	100	Ok
4.3.11(Containers for liquids or gases)	-	100	Ok
4.3.12(Flammable liquids)	-	100	Ok
4.6.2(Bottoms of fire enclosures)	-	100	Ok

23 Feb, 2029

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

65000 View breakup
Plasma/ LCD/ LED TV of screen size 32” & above upto 105", Plasma/ LCD/ LED TV of screen size up to 32”. Rs.50,000/- for Electronic games (Video), Power Adaptors for audio, video & similar electronic apparatus. ADDITIONAL PRODUCTS INCLUDED W.E.F. 17-07-2020-Rs. 45000/- for wireless headphone & Earphone, Television other than plasma/LCD/LED/TVS. ADDITIONAL PRODUCT FOR PHASE V INCLUDED W.E.F. 20-11-2020: Rs. 45,000/- for Wireless Microphone, Webcam (Finished Products), Smart Speaker (With and without display), Bluetooth Speakers, Video Camera

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	Cl.5 Marking and Instructions 500 Cl.5.1 Identification and supply ratings 500 Cl.5.2 Terminals 500 Cl.5.3 to Cl.5.5 Instructions 500
7(Heating under normal operating conditions)	-	3000	Cl.7 & Cl.7.1 Heating under Normal operating Conditions & General 500 Cl.7.2 Heat resistance of insulating material 500
8(Constructional requirements with regard to the protection against electric shock)	-	5000	Cl.8 & Cl.8.1 to Cl.8.21
9(Electric shock hazard under normal operating conditions)	-	4000	Cl.9 ,cl.9.1 & Cl.9.1.2 to Cl.9.2
10(Insulation requirements)	-	3000	Cl.10 & Cl.10.1 Insulation requirements 500 Cl.10.2 Surge test 500 10.3 Humidity treatment 500 Cl.10.4 Insulation resistance and dielectric strength 500
11(Fault conditions)	-	3000	Cl.11 Fault conditions 500 Cl.11.1 Electric shock hazard 500 Cl.11.2 Heating 500 x 3=1500
12(Mechanical strength)	-	6000	Cl.12 to Cl.12.1.3 & Cl.12.6 , Cl.12.7
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	Cl.13 & Cl.13.1 to Cl.13.7
14(Components)	-	500	Cl.14 Components 500
15(TERMINALS)	-	2500	Cl.15 Terminals 500 Cl.15.1 Plug & Sockets 500 Cl.15.2 Provisions for protective earthling 500 Cl.15.3 Terminals for external flexible cords and for permanent connection to the mains 500 Cl.15.4 Device forming a part of mains plug 500
16(External flexible cords)	-	1000	Cl.16 External Flexible cords 500
17(Electrical connections and mechanical fixings)	-	2500	Cl.17 & Cl.17.1 Electrical connections and mechanical fixings 500 Cl.17.2 500 Cl.17.3 500 Cl.17.4,Cl.17.5, Cl.17.6 500 Cl.17.7,Cl.17.8, Cl.17.9 500
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	1000	Cl.18 Mechanical Strength of picture tubes and protection against the effect of implosion 500
19(Stability and mechanical hazards)	-	2500	Cl.19 Stability and mechanical hazards 2500
20(Resistance to fire)	-	3000	CL.20 Resistance to fire, Electrical Components and mechanical parts, Fire enclosure 2500
4(General test conditions)	-	1000	OK

23 Feb, 2029

-
Excluding: Hazardous Radiation (Cl.6), Requirements for Insulating winding wires for use without additional interleaved insulation (Cl.8.16) (Annex-H), Printed Boards (Cl.13.5), Components (Cl.14), Cord Bend Test [Cl.16.3 (b)], Mechanical strength of picture tubes and protection against the effects of implosion (Cl.18), Electrical components & mechanical parts (Cl.20.2).

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	3750	ok
5.2(Message Readability)	-	3750	ok
5.1(Inputting of text)	-	0	ok
5.2(Message Readability)	-	0	ok

23 Feb, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

Atharva Laboratories Pvt. Ltd. (C-54), Noida

C-54, Hosiery Complex, Phase-II, Noida-201305, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 atharvalaboratories2@gmail.com

Scope List