BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 info@delhitesthouse.com

Scope List

Reset

180 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

151

IS 10633 (2017)

Vanaspati - Specification (Third Revision)

18350 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.18350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Baudouin test)	-	300	For BIS samples: 1.5 times of BIS testing charges
5.3(non-edible oils, mineral oil, castor oil and animal fats)	-	3600	For BIS samples: 1.5 times of BIS testing charges
6.1(Colour)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.2(Appearance)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.3(Foreign matter)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.4(Odour and Taste)	-	500	For BIS samples: 1.5 times of BIS testing charges
6.6(Aflatoxin content)	-	1500	For BIS samples: 1.5 times of BIS testing charges
6.7(Metal contaminants and pesticide residues)	-	4250	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Moisture)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Acid value)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Unsaponifiable matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Refractive index at 60°C)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Synthetic vitamin A, expressed in international units (I. U.) per gram, When packed)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Synthetic vitamin A, expressed in international units (I. U.) per gram, At retail outlet)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Nickel)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Trans fatty acids)	-	1500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Pb)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(As)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Cd)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Hg)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

-
Exclusion: 5.1 Raw material

152

IS 11069 (2018)

Refined, bleached, hydrogenated, winterized and deodorized (RBHWD) soybean oil - Specification (First Revision)

- View breakup
Rs.21250.00 Provisional testing charges

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Included w.e.f.28-09-2018.

153

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	200	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	200	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	200	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	200	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	200	-
4.3.2 - 5.21( Expanding materials)	-	200	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	200	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	200	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	200	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	200	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	200	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	100	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	100	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	100	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	100	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	100	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	200	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	200	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	100	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	100	-
4.6.2(Edges-Functional sharp edges)	-	100	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	100	-
4.6.4( Edges-Edges on moulded toys)	-	100	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	100	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	100	-
4.7.2 - a(Points-Functional sharp points)	-	100	-
4.7.2 - b(Points-Functional sharp points)	-	100	-
4.7.3 (Wooden toys)	-	100	-
4.8.1(Projections-General requirments)	-	100	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	200	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	200	-
4.9 - c( Metal wires and rods)	-	200	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	200	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	200	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	200	-
4.9 - c( Metal wires and rods-Spokes ends)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	200	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	200	-
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	200	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	200	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	200	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	200	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	200	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	200	-
4.11.6(Cords- Electrical cables)	-	200	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	200	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	200	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	200	-
4.11.10(Cords-Cords on toy bags)	-	200	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	200	-
4.11.11( Cords, strings and lines for flying toys- )	-	200	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	200	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	200	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	200	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	200	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	200	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	200	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	200	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	200	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	200	-
4.14(a)(Springs)	-	100	-
4.14(b)(Springs)	-	100	-
4.14(c)(Springs)	-	100	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	100	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	100	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	100	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	100	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	100	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	100	-
4.16.1(Enclosures-Ventilation)	-	100	-
4.16.1(Enclosures-Ventilation-No of openings)	-	100	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	100	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	100	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	100	-
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	100	-
4.16.1(Enclosures-Ventilation)	-	100	-
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	100	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	100	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	100	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	100	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	100	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	100	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	100	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	100	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	100	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	200	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	200	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	100	-
4.18.2(b)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	100	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	100	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	100	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	100	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	100	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	100	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	100	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	100	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	100	-
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	100	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	100	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	100	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	100	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	100	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	100	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	100	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	100	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	100	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	100	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	100	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	100	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	100	-
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	100	-
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	100	-
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	100	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	100	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	100	-
4.19(Rotors and propellers)	-	100	-
4.2(Aquatic toys)	-	100	-
4.21(a)(Braking)	-	100	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	100	-
4.21(b)(braking)	-	100	-
4.22.1(Toy bicycles-Instructions for use)	-	100	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	100	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	100	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	100	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	100	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	100	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	200	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	100	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	100	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	100	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	100	-
4.25(Liquid-filled toys)	-	100	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	100	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	100	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	100	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	100	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	100	-
4.28( Percussion caps specifically designed for use in toys)	-	100	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	100	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	100	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	100	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	100	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	100	-
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	100	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	100	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	100	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	100	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	100	-
4.30.6 ( Toy scooters-Braking)	-	100	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	100	-
4.30.7( Toy scooters-Wheel size(diameter))	-	100	-
4.30.8(Toy scooters-Projections)	-	100	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	100	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	100	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	200	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	200	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	200	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	200	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	200	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	100	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	100	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	100	-
4.34(Sledges and toboggans with cords for pulling)	-	100	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	250	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	250	-
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	500	-
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	500	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	625	-
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	625	-
9873 (Part - 1) 4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
9873 (Part - 1) 4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
9873 (Part - 1) 4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
9873 (Part - 1) 4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
9873 (Part - 1) 4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
9873 (Part - 1) 4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
5.24.6.1(Tension Test General procedure)	-	200	-
4.3.1(Material quality)	-	100	-

Complete

-
Included w.e.f. 15-10-2020

154

IS 75 (1973)

Specification for linseed oil, raw and refined (Second Revision)

20100 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.20100/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.2(clarity of the material)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.3(Admixture with other oils)	-	5500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Moisture and insoluble impurities)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Colour in a 1/4-inch cell on the Lovibond scale expressed as Y + 10 R)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Refractive index at 40°C)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Relative density at 30°C/30°C)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Saponification value)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Iodine value)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Acid value)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Unsaponifiable matter)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Foot)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Freedom from break)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Freedom from lead)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Flash point ( Pensky-Martens ))	-	350	For BIS Samples: 1.5 times of BIS testing Charges

Complete

-
Included w.e.f.28-09-2018.

155

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

9500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.9500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	165	For BIS samples 1.5 times of BIS testing charges
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	170	For BIS samples 1.5 times of BIS testing charges
6.3(Standard Mark on Conduit)	-	165	For BIS samples 1.5 times of BIS testing charges
7.1.1(Maximum and minimum outside diameter of socket)	-	125	For BIS samples 1.5 times of BIS testing charges
7.1.1 Table-2(Length of Socket end)	-	125	For BIS samples 1.5 times of BIS testing charges
7.1.2(Maximum and minimum outside diameter of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.2(Minimum inside diameter of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.3(Length of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.4(Unifomity of The wall Thickness)	-	125	For BIS samples 1.5 times of BIS testing charges
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	200	For BIS samples 1.5 times of BIS testing charges
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	For BIS samples 1.5 times of BIS testing charges
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	For BIS samples 1.5 times of BIS testing charges
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	For BIS samples 1.5 times of BIS testing charges
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	For BIS samples 1.5 times of BIS testing charges
10(Resistance to Heat -Ball presure test)	-	1000	For BIS samples 1.5 times of BIS testing charges
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	For BIS samples 1.5 times of BIS testing charges
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	800	For BIS samples 1.5 times of BIS testing charges
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	750	For BIS samples 1.5 times of BIS testing charges
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	200	For BIS samples 1.5 times of BIS testing charges

Complete

-
-

156

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 6.1(Stress Relief Test- Appendix A)	-	750	For BIS samples 1.5 times of BIS testing charges
Cl. 6.2(Opacity- Appendix B)	-	750	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	1000	For BIS samples 1.5 times of BIS testing charges
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	1200	For BIS samples 1.5 times of BIS testing charges

Complete

-
-

157

IS 447 (1988)

Specification for rubber hose for welding (Fourth Revision)

10000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.2 - Table 1(Bore size)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 3.3 - Table 2(Tensile strength - Lining MPA)	-	4000	For BIS samples 1.5 times of BIS testing charges
Cl. 3.4 - Table3(Pressure Tests)	-	5000	For BIS samples 1.5 times of BIS testing charges

Complete

-
-

158

IS 14309 (1995)

Blended edible vegetable oils specification

9500 View breakup
Rs.9500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Moisture and volatile matter percent by mass, Max type1)	-	750	N.A.
Table-1(Acid value, mx type 1)	-	500	N.A.
Table-1(Unsaponifiable matter, percent by mass, MaX type1)	-	500	N.A.
Table-1(Flash point, Pen&y-Martens type1)	-	400	N.A.

Complete

-
-

159

IS 14542 (1998)

Partly skimmed milk powder specification

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	500	-
Table 1(i)(Moisture Type II (IS 11623))	-	500	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	400	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	400	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	400	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	400	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	400	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	400	-
Cl 6.4(Flavour and Taste (IS 10030))	-	200	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	500	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	500	-

Complete

-
-

160

IS 14609 (1999)

Dry chemical powder for fighting a,b,c, class fires specification

- View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

161

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

12250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	100	NA
5(Colour of fittings)	-	250	NA
7.1,Table 1(Wall thickness)	-	100	NA
7.2 ,Table 2&3(Socket Dimensions)	-	100	NA
7.3(Dimensions of waste trap(Nahani Trap)	-	100	NA
8(Sealing Rings)	-	500	NA
10(Workmanship)	-	100	NA
11(Design requirements)	-	100	NA
12.1(Visual appearance)	-	250	NA
12.2(Stress relief test)	-	1500	NA
12.3(Vicat softening tempewrature)	-	1000	NA
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	NA
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	NA
Cl.15, Annex B(Sulphated Ash Content)	-	1500	NA
16.1(Impact test)	-	1500	NA
17(Watet tightness of joint)	-	1500	NA
19(Marking)	-	100	NA
4(Size Designation)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	200	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	200	-
11.5,Table 6(Pipe Clips)	-	200	-

Complete

-
-

162

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

7500 View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	100	NA
4(Material)	-	5400	NA
6.1 & Table 1( i) Name of Utensil )	-	100	NA
6.1 & Table 1(ii) Shape of Utensil)	-	100	NA
6.1 & Table 1( Nominal Size, mm)	-	100	NA
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	100	NA
6.1 & Table 1(Outside dia Ф NA)	-	100	NA
6.1 & Table 1(Height NA)	-	100	NA
6.1 & Table 1(Capacity, l NA)	-	100	NA
6.1( Minimum sheet thickness for nominal size )	-	100	NA
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	150	NA
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	150	NA
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	200	NA
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	200	NA
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	200	NA
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	200	NA
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	200	NA
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	200	NA
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	200	NA
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	200	NA
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	300	NA

Complete

-
0.0

163

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 10.3(UTM)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 11.3(Press)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 12(Sudden Load Applied)	-	2800	For BIS Samples: 1.5 times of BIS testing charges
Cl 15(Length, Width & Thickness)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 18(Weight)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Depth)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Camber)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges

Complete

-
Cl 13 (Y Groove Cracking Test)

164

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

9000 View breakup
Rs.9000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	1500	NA
Cl 10.1(Manufacturing )	-	500	NA
Cl 10.1.1(Manufacturing )	-	500	NA
Cl 12(Workmanship)	-	500	NA
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	3500	NA
Cl 15(Workmanship)	-	500	NA

Complete

-
0.0

165

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

9500 View breakup
Rs.9500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	400	NA
6.1(Manganese %)	-	400	NA
6.1(Sulphur %)	-	400	NA
6.1(Phosphorus %)	-	400	NA
6.1(V)	-	400	NA
6.1( Nb)	-	400	NA
6.1( Copper %)	-	400	NA
6.1( Nitrogen%)	-	1000	NA
6.1(Silicon %)	-	400	NA
6.1( Aluminium %)	-	400	NA
6.1( Ti)	-	400	NA
6.1(Cr)	-	400	NA
6.1(Mo)	-	400	NA
6.1(Ni)	-	400	NA
Cl 8(UTM)	-	2000	NA
Cl 9(Press)	-	500	NA
Cl 10(Die Press)	-	1000	NA
Cl 12(Workmanship)	-	300	NA
Cl 13(Length, Width & Thickness)	-	400	NA

Complete

-
0.0

166

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.7000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	600	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	800	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	600	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges

Complete

-
0.0

167

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

5250 View breakup
Rs.5250.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	250	NA
6.1(Manganese %)	-	250	NA
6.1(Sulphur %)	-	250	NA
6.1(Phosphorus %)	-	250	NA
6.1( Nitrogen%)	-	1000	NA
6.1(Silicon %)	-	250	NA
6.1( Aluminium %)	-	250	NA
6.1(V)	-	250	NA
6.1( Ti)	-	250	NA
6.1( Copper %)	-	250	NA
6.1( Nb)	-	250	NA
6.1(Boron)	-	250	NA
Cl 8(Workmanship)	-	500	NA
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	NA

Complete

-
0.0

168

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

8887.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	NA
Clause 3.1.1(Phosphorus)	-	500	NA
Cl 4.1(Workmanship)	-	500	NA
Cl 5 & 6(Diameter)	-	1000	NA
Cl 7(UTM)	-	3000	NA
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	NA

Complete

-
0.0

169

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1(Diameter)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Diameter & Ovality)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Weight)	-	100	For BIS samples: 1.5 times of BIS testing charges.
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1800	For BIS samples: 1.5 times of BIS testing charges.
Cl 9.3(Press)	-	400	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1( CARBON)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(SULPHUR)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(PHOSPHURS)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(MANGANESE)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(SILICON)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1( ALUMINIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Nickel)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Chromium)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Molybdenum)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(NIOBIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.2(VANADIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.3(TITANIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.1(Workmanship)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Diameter & Ovality)	-	400	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Weight)	-	100	For BIS samples: 1.5 times of BIS testing charges.
Cl 8(Physical Requirements)	-	1800	For BIS samples: 1.5 times of BIS testing charges.
Cl 9.3(Press)	-	400	For BIS samples: 1.5 times of BIS testing charges.

Complete

-
-

170

IS 14724 (1999)

Water purifiers with Ultra - Violet disinfection - Specification

19500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.19500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Workmanship)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl 5(Power Supply, Maximum Rate of Flow, Electrical Safety, Materials of Construction, Safety Against UV Exposure, Indicating Lights & In-Bullt Protections and Ease of Operation)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 6(Leakage-Tightness & Verification of Guarantees of Performance)	-	4000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.1(Test for turbidity (IS 3025 Part 10))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.2(Test for supended particles)	-	500	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.4(Test for adsorption of activated carbon (IS 3025 Part 5))	-	3000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.3(Test for Microbiology - Annex A)	-	8000	For BIS Samples: 1.5 times of BIS testing charges

Complete

-
0.0

171

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table-1(Sulphur)	-	250	NA
Clause 6.1, Table-1(Phosphorus)	-	250	NA
6.2(Phosphorus %)	-	250	NA
6.2(Sulphur %)	-	250	NA
6.2( Nitrogen%)	-	1000	NA
7(Dimensions)	-	200	NA
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	700	NA
8.2(Mechanical Properties (as per IS 1717))	-	400	NA
8.3(Mechanical Properties (as per IS 1755))	-	400	NA
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	400	NA
9.1(Galvanizing Requirements )	-	500	NA
9.2(Galvanizing Requirements )	-	500	NA
9.3(Galvanizing Requirements )	-	400	NA
11(Freedom from defects)	-	200	NA

Complete

-
-

172

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	NA
6(Freedom From Defects)	-	200	NA
9.3(Tensile Test-1608:Part 1)	-	900	NA
9.3, Table 3 (Yield Strength, Mpa)	-	800	NA
9.3, Table 3 (Elongation, %)	-	800	NA
11(Surface finish)	-	300	NA
14.1(Thickness,mm)	-	200	NA
14.2( Width, mm)	-	200	NA
14.3(Length, mm)	-	200	NA
14.5(Camber, mm)	-	200	NA
14.4(Flatness, mm)	-	200	NA

Complete

-
-

173

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

5500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.5,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	NA
9( FREEDOM FROM DEFECTS)	-	200	NA
10.1.a)( Macro examination IS 11371)	-	500	NA
10.1.b)( Sulphur print tests IS 12037)	-	500	NA
11 & 12(DIMENSIONS and Tolerances)	-	300	NA

Complete

-
0.0

174

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

5500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.5,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	200	NA
Cl 10.1(Workmanship)	-	100	NA
Cl 10.2(Workmanship)	-	100	NA
Cl 10.2(Press)	-	200	NA
Cl 10.3(Workmanship)	-	700	NA
Cl 11(Length, Width & Thickness)	-	400	NA
6.1(Carbon %)	-	300	NA
6.1(Manganese %)	-	300	NA
6.1(Phosphorus %)	-	300	NA
6.1(Sulphur %)	-	300	NA
6.1(Silicon %)	-	300	NA
6.1( Nitrogen%)	-	300	NA
6.1( Copper %)	-	300	NA
6.1( Nb)	-	200	NA
6.1( Aluminium %)	-	300	NA
6.1(V)	-	300	NA
6.1( Ti)	-	300	NA
6.1(Cr)	-	200	NA
6.1(Mo)	-	200	NA
6.1(Ni)	-	200	NA

Complete

-
0.0

175

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

19400 View breakup
Rs.19400.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	NA
2.1.1(Type and Desiganation)	-	100	NA
2.1.2(Type and Desiganation)	-	100	NA
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	NA
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
4.1(Performance Requirments)	-	700	NA
4.2(Performance Requirments)	-	700	NA
4.3(Performance Requirments)	-	700	NA
4.4(Performance Requirments)	-	1800	NA
4.5(Performance Requirments)	-	1700	NA
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	500	NA
4.7(Electrolytic corrosion)	-	1500	NA
4.8(Stability to accelerated ageing )	-	1000	NA
4.9(Insulation resistance test)	-	500	NA
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	9100	NA

Complete

-
Up to 0.22mm thickness only

176

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 2(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
5& 5.1, Table 3(Coordinating size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 3(Work size-IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 3(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
5& 5.1, Table 4(Nominal size-IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 4(Work size-IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 4(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 5,i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 5, i b (Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1000	Provisional Testing Charges
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	800	Provisional Testing Charges
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	Provisional Testing Charges
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	Provisional Testing Charges
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	500	Provisional Testing Charges
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	500	Provisional Testing Charges
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	1150	Provisional Testing Charges
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	1150	Provisional Testing Charges
6 table 6, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 6, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 6, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	Provisional Testing Charges
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	800	Provisional Testing Charges
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	Provisional Testing Charges
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	500	Provisional Testing Charges
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 7, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 7, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 7, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	Provisional Testing Charges
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	800	Provisional Testing Charges
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	500	Provisional Testing Charges
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	Provisional Testing Charges
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	500	Provisional Testing Charges
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 8, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 8, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 8, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	Provisional Testing Charges
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	1150	Provisional Testing Charges
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	1150	Provisional Testing Charges
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	Provisional Testing Charges
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	500	Provisional Testing Charges
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	500	Provisional Testing Charges
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 9, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 9, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 9, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	Provisional Testing Charges
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	800	Provisional Testing Charges
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	500	Provisional Testing Charges
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	500	Provisional Testing Charges
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 9, ii q(Bulk Density-)	-	500	Provisional Testing Charges
6 table 9, iii a(Resistance to staining )	-	500	Provisional Testing Charges
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges

Complete

-
-

177

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

10000 View breakup
Rs.10000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	NA
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	NA
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	NA
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	NA
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	NA
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	NA
7 -Table 2- i(Fineness 4031 Part 2)	-	700	NA
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	NA
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	NA
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	NA
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	NA
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	NA
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	NA
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	N.A.
7 -Table 2- i(Fineness 4031 Part 2)	-	700	N.A.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	N.A.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	N.A.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	N.A.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	N.A.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	N.A.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	N.A.

Complete

-
Exclusion: 4 (Raw material)

178

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	NA
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	NA
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	NA
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	NA
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	NA
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	NA
7 -Table 2- i(Fineness 4031 Part 2)	-	700	NA
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	NA
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	NA
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	NA
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	NA
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	NA
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	NA
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	N.A.
7 -Table 2- i(Fineness 4031 Part 2)	-	700	N.A.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	N.A.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	N.A.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	N.A.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	N.A.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	N.A.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	N.A.

Complete

-
-

179

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33, 43, 43S, 53 & 53S

9500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 iii.(Insoluble residue)	-	500	N.A.
6.1 Table-2 vii(Chloride content)	-	300	N.A.
6.1 Table-2 vi(Loss on ignition)	-	500	N.A.
6.1 Table-2 viii(Alkali content)	-	500	N.A.
7 Table-3 i.(Fineness)	-	700	N.A.
7 Table-3 ii a(Expansion by Le Chatelier)	-	600	N.A.
7 Table-3 ii b(Expansion by Autoclave)	-	600	N.A.
7 Table-3 iii a(Setting Time Initial)	-	400	N.A.
7 Table-3 iii b(Setting Time Final)	-	400	N.A.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	N.A.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	650	N.A.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	650	N.A.
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	N.A.

Complete

-
Included w.e.f. 28-09-2018

180

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

17400 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1300	For BIS samples 1.5 times of BIS testing charges
5.4.2(a)( Aggregates Impact Value)	-	700	For BIS samples 1.5 times of BIS testing charges
5.4.3(a)( Aggregate Abrasion Value)	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges

Complete

-
Only for aggregates from natural sources

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 info@delhitesthouse.com

Scope List

No Record Found

No Record Found