BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 info@delhitesthouse.com

Scope List

Reset

177 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

121

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	3000	N.A.
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	3000	N.A.
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	3000	N.A.
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	3000	N.A.
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	3000	N.A.
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	3000	N.A.
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	3000	N.A.
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	3000	N.A.
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	3000	N.A.
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	3000	N.A.
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	3000	N.A.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	3000	N.A.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	3000	N.A.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	3000	N.A.
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	3000	N.A.
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	3000	N.A.
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	3000	N.A.
4.1(General)	-	100	N.A.

Complete

122

IS 10633 (2017)

Vanaspati - Specification (Third Revision)

18350 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.18350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Baudouin test)	-	300	For BIS samples: 1.5 times of BIS testing charges
5.3(non-edible oils, mineral oil, castor oil and animal fats)	-	3600	For BIS samples: 1.5 times of BIS testing charges
6.1(Colour)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.2(Appearance)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.3(Foreign matter)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.4(Odour and Taste)	-	500	For BIS samples: 1.5 times of BIS testing charges
6.6(Aflatoxin content)	-	1500	For BIS samples: 1.5 times of BIS testing charges
6.7(Metal contaminants and pesticide residues)	-	4250	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Moisture)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Acid value)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Unsaponifiable matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Refractive index at 60°C)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Synthetic vitamin A, expressed in international units (I. U.) per gram, When packed)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Synthetic vitamin A, expressed in international units (I. U.) per gram, At retail outlet)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Nickel)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Trans fatty acids)	-	1500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Pb)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(As)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Cd)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Hg)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

123

IS 5168 (2018)

Glass feeding bottles - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Types)	-	100	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.1(Materials)	-	3000	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.2(Description)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.3(Capacity)	-	500	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.4(Types, Dimensions and Wall Thickness)	-	500	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.5(Scale and Graduations)	-	750	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.7(Thermal Shock Resistance)	-	1000	For BIS samples: 1.5 times of BIS testing charges.

Complete

124

IS 11069 (2018)

Refined, bleached, hydrogenated, winterized and deodorized (RBHWD) soybean oil - Specification (First Revision)

- View breakup
Rs.21250.00 Provisional testing charges

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

Included w.e.f.28-09-2018.

125

IS 15573 (2018)

Polyaluminium chloride (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1,5.1.2,5.2, Table-1, Toxic substances(Mercury(as Hg))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2 ,5.2, Table-1, Toxic substances(Arsenic(as As))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Cadmium(as Cd))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Lead(as Pb))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1.5.1.2,5.2, Table-1, Toxic substances(Iron(as Fe))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Manganese(as Mn))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Chromium (as Cr))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.12, 5.2, Table-1, Toxic substances(Selenium (as Se))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(i)(Aluminium as Al2O3,)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(ii)(Basicity)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(iii)(Chloride (as Cl))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(iv)(Sulphates(as SO4))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(x)(Insoluble)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(xi)(Ph of 5% of solution)	-	300	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(ix)(Total organic carbon)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(v)(Specific gravity)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(vi)(Viscosity)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(vii)(Bulk density)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.12000/- for liquid, Rs.11000/- for powder

Complete

126

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	200	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	200	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	200	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	200	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	200	-
4.3.2 - 5.21( Expanding materials)	-	200	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	200	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	200	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	200	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	200	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	200	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	100	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	100	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	100	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	100	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	100	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	200	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	200	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	100	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	100	-
4.6.2(Edges-Functional sharp edges)	-	100	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	100	-
4.6.4( Edges-Edges on moulded toys)	-	100	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	100	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	100	-
4.7.2 - a(Points-Functional sharp points)	-	100	-
4.7.2 - b(Points-Functional sharp points)	-	100	-
4.7.3 (Wooden toys)	-	100	-
4.8.1(Projections-General requirments)	-	100	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	200	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	200	-
4.9 - c( Metal wires and rods)	-	200	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	200	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	200	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	200	-
4.9 - c( Metal wires and rods-Spokes ends)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	200	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	200	-
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	200	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	200	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	200	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	200	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	200	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	200	-
4.11.6(Cords- Electrical cables)	-	200	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	200	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	200	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	200	-
4.11.10(Cords-Cords on toy bags)	-	200	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	200	-
4.11.11( Cords, strings and lines for flying toys- )	-	200	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	200	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	200	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	200	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	200	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	200	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	200	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	200	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	200	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	200	-
4.14(a)(Springs)	-	100	-
4.14(b)(Springs)	-	100	-
4.14(c)(Springs)	-	100	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	100	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	100	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	100	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	100	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	100	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	100	-
4.16.1(Enclosures-Ventilation)	-	100	-
4.16.1(Enclosures-Ventilation-No of openings)	-	100	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	100	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	100	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	100	-
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	100	-
4.16.1(Enclosures-Ventilation)	-	100	-
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	100	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	100	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	100	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	100	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	100	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	100	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	100	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	100	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	100	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	200	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	200	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	100	-
4.18.2(b)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	100	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	100	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	100	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	100	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	100	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	100	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	100	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	100	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	100	-
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	100	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	100	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	100	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	100	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	100	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	100	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	100	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	100	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	100	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	100	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	100	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	100	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	100	-
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	100	-
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	100	-
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	100	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	100	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	100	-
4.19(Rotors and propellers)	-	100	-
4.2(Aquatic toys)	-	100	-
4.21(a)(Braking)	-	100	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	100	-
4.21(b)(braking)	-	100	-
4.22.1(Toy bicycles-Instructions for use)	-	100	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	100	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	100	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	100	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	100	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	100	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	200	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	100	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	100	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	100	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	100	-
4.25(Liquid-filled toys)	-	100	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	100	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	100	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	100	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	100	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	100	-
4.28( Percussion caps specifically designed for use in toys)	-	100	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	100	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	100	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	100	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	100	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	100	-
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	100	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	100	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	100	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	100	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	100	-
4.30.6 ( Toy scooters-Braking)	-	100	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	100	-
4.30.7( Toy scooters-Wheel size(diameter))	-	100	-
4.30.8(Toy scooters-Projections)	-	100	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	100	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	100	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	200	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	200	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	200	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	200	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	200	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	100	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	100	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	100	-
4.34(Sledges and toboggans with cords for pulling)	-	100	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	250	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	250	-
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	500	-
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	500	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	625	-
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	625	-
9873 (Part - 1) 4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
9873 (Part - 1) 4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
9873 (Part - 1) 4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
9873 (Part - 1) 4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
9873 (Part - 1) 4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
9873 (Part - 1) 4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
5.24.6.1(Tension Test General procedure)	-	200	-
4.3.1(Material quality)	-	100	-

Complete

127

IS 75 (1973)

Specification for linseed oil, raw and refined (Second Revision)

20100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.2(clarity of the material)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.3(Admixture with other oils)	-	5500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Moisture and insoluble impurities)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Colour in a 1/4-inch cell on the Lovibond scale expressed as Y + 10 R)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Refractive index at 40°C)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Relative density at 30°C/30°C)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Saponification value)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Iodine value)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Acid value)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Unsaponifiable matter)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Foot)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Freedom from break)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Freedom from lead)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Flash point ( Pensky-Martens ))	-	350	For BIS Samples: 1.5 times of BIS testing Charges

Complete

128

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	165	For BIS samples 1.5 times of BIS testing charges
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	170	For BIS samples 1.5 times of BIS testing charges
6.3(Standard Mark on Conduit)	-	165	For BIS samples 1.5 times of BIS testing charges
7.1.1(Maximum and minimum outside diameter of socket)	-	125	For BIS samples 1.5 times of BIS testing charges
7.1.1 Table-2(Length of Socket end)	-	125	For BIS samples 1.5 times of BIS testing charges
7.1.2(Maximum and minimum outside diameter of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.2(Minimum inside diameter of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.3(Length of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.4(Unifomity of The wall Thickness)	-	125	For BIS samples 1.5 times of BIS testing charges
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	200	For BIS samples 1.5 times of BIS testing charges
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	For BIS samples 1.5 times of BIS testing charges
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	For BIS samples 1.5 times of BIS testing charges
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	For BIS samples 1.5 times of BIS testing charges
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	For BIS samples 1.5 times of BIS testing charges
10(Resistance to Heat -Ball presure test)	-	1000	For BIS samples 1.5 times of BIS testing charges
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	For BIS samples 1.5 times of BIS testing charges
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	800	For BIS samples 1.5 times of BIS testing charges
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	750	For BIS samples 1.5 times of BIS testing charges
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	200	For BIS samples 1.5 times of BIS testing charges

Complete

129

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

6800 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.6,800/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i) (Apendix B)(Total milk solids -Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (i) (Apendix B)(Total milk solids - Partly Skimmed Condenied Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (i) (Apendix B)(Total milk solids - Skirmned Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (ii) (IS : 11762- 1986)(Fat -Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (ii) (IS : 11762- 1986)(Fat -Partly Skimmed Condenied Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (ii) (IS : 11762- 1986)(Fat -Skirmned Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (iii) (Apendix C)(Sucrose -Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (iii) (Apendix C)(Sucrose -Partly Skimmed Condenied Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (iii) (Apendix C)(Sucrose -Skirmned Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Partly Skimmed Condenied Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Skirmned Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (v) (Apendix E)(Accelerated starage test -Condensed Milk)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Table 1 (v) (Apendix E)(Accelerated starage test -Partly Skimmed Condenied Milk)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Table 1 (v) (Apendix E)(Accelerated starage test -Skirmned Condensed Milk)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.1(Salmonella IS 5887 Part 3)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.1(Shigella IS 5887 Part 7)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.2(Coliform Count IS 5401 Part 1)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.3(Yeast and Mould Count IS 5403)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.4(Coagulase positive Staphylococcus aureus IS 5887 Part 2)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.5(Escherichia coli IS 5887 Part 1)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

130

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 6.1(Stress Relief Test- Appendix A)	-	750	For BIS samples 1.5 times of BIS testing charges
Cl. 6.2(Opacity- Appendix B)	-	750	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	1000	For BIS samples 1.5 times of BIS testing charges
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	1200	For BIS samples 1.5 times of BIS testing charges

Complete

131

IS 12176 (1987)

Specification for sweetened ultra high temperature (UHT) treated condensed milk

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1- Table 1-Sl No.-i(Total milk solids)	-	500	Provisional Testing Charges
4.1.1- Table 1-Sl No.-ii(Fat)	-	500	Provisional Testing Charges
4.1.1- Table 1-Sl No.-iii(Sucrose)	-	500	Provisional Testing Charges
4.1.1- Table 1-Sl No.-iv(Titratable acidity ( as lactic acid ))	-	250	Provisional Testing Charges
4.1.1- Table 1-Sl No.-v(Titratable acidity (as acetic acid) after incubation, of packages for 7 days at 37°C.)	-	250	Provisional Testing Charges
4.1.4(Colour)	-	500	Provisional Testing Charges
4.1.5(Flavour & Taste)	-	500	Provisional Testing Charges
4.1.10.1(Bacterial spores ( plate count ))	-	500	Provisional Testing Charges
4.1.10.2(Coliform count)	-	500	Provisional Testing Charges
4.1.10.3(Coagulase positive Staphylococcus aureus)	-	500	Provisional Testing Charges

Complete

132

IS 447 (1988)

Specification for rubber hose for welding (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.2 - Table 1(Bore size)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 3.3 - Table 2(Tensile strength - Lining MPA)	-	4000	For BIS samples 1.5 times of BIS testing charges
Cl. 3.4 - Table3(Pressure Tests)	-	5000	For BIS samples 1.5 times of BIS testing charges

Complete

133

IS 1322 (1993)

Bitumen Felts for Water Proofing and Damp-proofing

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2 & Table 1(Weight)	-	250	-
4.3.3, & Table 1(Weight )	-	250	-
5.4 & Table 1(Weight )	-	250	-
6(Dimension-IS 1322)	-	400	-
7.1(Breaking Strength test- IS 13826(Part 1))	-	500	-
7.1(Pliabilitry Test-IS 13826(Part 2))	-	500	-
7.1(Strage Sticking Test-IS 13826(Part 3))	-	500	-
7.1(Pressure Head Test-IS 13826(Part-4 )	-	400	-
7.1(Heat Resistance Test-IS 13826(Part 5))	-	500	-
7.1(Water Absorption Test-IS 13826(Part 6))	-	500	-

Complete

134

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	500	N.A.
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	500	N.A.
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	750	N.A.
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	500	N.A.
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	N.A.
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	1750	N.A.
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	N.A.
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	1500	N.A.
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1750	N.A.
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1500	N.A.
3.4-Table 1(vi)(Compression set)	-	1200	N.A.
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	3500	N.A.
Clause 4.3 Table 1(Zinc oxide)	-	500	N.A.
Clause 3.4 Table 1(Heavy metal content)	-	750	N.A.
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	1500	N.A.

Complete

135

IS 13395 (1995)

Performance of handles and handle assemblies attached to cookware - Specification

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	250	Provisional Testing Charges
5.2(Bending Strength)	-	500	Provisional Testing Charges
5.3(Torque Strength)	-	500	Provisional Testing Charges
5.4(Impact Strength)	-	500	Provisional Testing Charges
5.5(Fatigue Resistance)	-	500	Provisional Testing Charges
5.6(Leakage)	-	500	Provisional Testing Charges
5.7(Thermal Insulation)	-	500	Provisional Testing Charges
5.8(Heat Resistance)	-	750	Provisional Testing Charges
5.9(Washing Resistance)	-	1000	Provisional Testing Charges
5.1(Burning Resistance)	-	1000	Provisional Testing Charges

Complete

136

IS 14309 (1995)

Blended edible vegetable oils specification

9500 View breakup
Rs.9500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Moisture and volatile matter percent by mass, Max type1)	-	750	N.A.
Table-1(Acid value, mx type 1)	-	500	N.A.
Table-1(Unsaponifiable matter, percent by mass, MaX type1)	-	500	N.A.
Table-1(Flash point, Pen&y-Martens type1)	-	400	N.A.

Complete

137

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1500	For BIS samples 1.5 times of BIS testing charges
4.2.3(Carbon Dispersion Test)	-	500	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	125	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	125	For BIS samples 1.5 times of BIS testing charges
5.3(Types and Features )	-	125	For BIS samples 1.5 times of BIS testing charges
5.6(Types and Features )	-	125	For BIS samples 1.5 times of BIS testing charges
6.1(Finish)	-	250	For BIS samples 1.5 times of BIS testing charges
7.1.1(Resistance to Deformation)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.2(Resistance to Impact)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.3(Test for Top Load Resistance)	-	1000	For BIS samples 1.5 times of BIS testing charges
7.4(Tensile Strength)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.5(Flexural Modulus)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.6(overall Migration)	-	3000	For BIS samples 1.5 times of BIS testing charges
5(Types and Features )	-	500	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
7.1.2(Resistance to Deformation)	-	1500	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	200	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2 (7)(Minimum Wall Thickness)	-	150	For BIS samples 1.5 times of BIS testing charges
5.4(Wall Thickness above effective height)	-	150	For BIS samples 1.5 times of BIS testing charges
9.1(Lid Thickness)	-	150	For BIS samples 1.5 times of BIS testing charges
9.1(Man-Hole and Hand-Hole Lids)	-	150	For BIS samples 1.5 times of BIS testing charges
9.2(Man-Hole and Hand-Hole Lids)	-	150	For BIS samples 1.5 times of BIS testing charges
9.2.1(Man-Hole and Hand-Hole Lids)	-	150	For BIS samples 1.5 times of BIS testing charges

Complete

138

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	100	For BIS samples 1.5 times of BIS testing charges
6(Dimensions of pipes)	-	500	For BIS samples 1.5 times of BIS testing charges
7(Visual Appearance)	-	250	For BIS samples 1.5 times of BIS testing charges
8.1(Hydraulic characteristics)	-	5500	For BIS samples 1.5 times of BIS testing charges
8.2(Reversion)	-	1500	For BIS samples 1.5 times of BIS testing charges
8.3(Density)	-	1000	For BIS samples 1.5 times of BIS testing charges
8.4(Melt Flow Rate)	-	1250	For BIS samples 1.5 times of BIS testing charges
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	For BIS samples 1.5 times of BIS testing charges
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1000	For BIS samples 1.5 times of BIS testing charges
10(Marking)	-	200	For BIS samples 1.5 times of BIS testing charges
3(Designation)	-	200	For BIS samples 1.5 times of BIS testing charges

Complete

139

IS 14542 (1998)

Partly skimmed milk powder specification

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	500	-
Table 1(i)(Moisture Type II (IS 11623))	-	500	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	400	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	400	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	400	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	400	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	400	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	400	-
Cl 6.4(Flavour and Taste (IS 10030))	-	200	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	500	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	500	-

Complete

140

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	200	NA
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1500	NA
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	750	NA
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	750	NA
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	2500	NA
5.1 table -1(DIMENSIONS OF PIPES)	-	150	NA
5.1.2(Ovality)	-	100	NA
6.1(VISUAL APPEARANCE)	-	250	NA
7.1 Table -2(Hydraulic Characteristics)	-	500	NA
7.2(Reversion Test)	-	1000	NA
7.3(Tensile Test)	-	1500	NA
7.4table-2(Fusion Compatibility Test)	-	0	NA
7.5(Density)	-	1500	NA
7.6(Melt now Rate (MFR))	-	1500	NA
(Cl.4.2)(Carbon black- a)carbon content)	-	1500	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	1000	-
Cl.5(Dimensions of pipe - i) Outside diameter)	-	200	-
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	200	-
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	200	-
Cl.6(Visual Appearance)	-	200	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	2000	-
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1000	-
Cl.7.2)(Reversion Test)	-	1000	-
Cl.7.3(Tensile Test- i) Tensile Strength)	-	1500	-
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	2000	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	1000	-
(Cl.7.5)(Density)	-	1000	-
Cl.7.6(Melt Flow Rate)	-	1000	-

Complete

141

IS 14609 (1999)

Dry chemical powder for fighting a,b,c, class fires specification

- View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

142

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

12250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	100	NA
5(Colour of fittings)	-	250	NA
7.1,Table 1(Wall thickness)	-	100	NA
7.2 ,Table 2&3(Socket Dimensions)	-	100	NA
7.3(Dimensions of waste trap(Nahani Trap)	-	100	NA
8(Sealing Rings)	-	500	NA
10(Workmanship)	-	100	NA
11(Design requirements)	-	100	NA
12.1(Visual appearance)	-	250	NA
12.2(Stress relief test)	-	1500	NA
12.3(Vicat softening tempewrature)	-	1000	NA
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	NA
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	NA
Cl.15, Annex B(Sulphated Ash Content)	-	1500	NA
16.1(Impact test)	-	1500	NA
17(Watet tightness of joint)	-	1500	NA
19(Marking)	-	100	NA
4(Size Designation)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	200	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	200	-
11.5,Table 6(Pipe Clips)	-	200	-

Complete

143

IS 15905 (2011)

Hubless centrifugally cast (Spun) iron pipes, fittings and accessories - Spigot series - Specification

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(shall conform to FG 150 grade,appropriate, specified in IS 210.)	-	1500	-
5.3(Hardness )	-	1000	-
7.1(Visual Inspection and Hammer Test)	-	250	-
8.1(Crushing Strength )	-	1500	-
9.1(Hydraustatic Test)	-	2500	-
10.1(External Diameter)	-	100	-
10.2, Table 3, Sl no. I to IV(Pipe Thickness)	-	100	-
10.2 , Table 3, Sl no. I to IV(Fittings Thickness)	-	100	-
10.3(Length)	-	100	-
10.5(Masses)	-	100	-
11.2.1, 11.2.2, Table 4 and 5, Sl no. Ito V(Nominal Size (DN))	-	100	-
11.2.1, 11.2.2, Table 4 and 5, Sl no. I to V(a)	-	100	-
11.2.3, Table 6, Sl no. I to IV(Nominal Size (DN 1))	-	100	-
11.2.3, Table 6, Sl no. I to IV(a)	-	100	-
11.2.3, Table 6, Sl no. I to IV(r)	-	100	-
11.2.4, Table 7, Sl no. I to V(Nominal Size (DN 1))	-	100	-
11.2.4, Table 7, Sl no. I to V(a)	-	100	-
11.2.4, Table 7, Sl no. I to V(b)	-	100	-
11.2.5, Table 8, Sl no. I to II(Nominal Size (DN 1))	-	100	-
11.2.5, Table 8, Sl no. I to II(Nominal Size (DN 2))	-	100	-
11.2.5, Table 8, Sl no. I to II(a)	-	100	-
11.2.5, Table 8, Sl no. I to II(r)	-	100	-
11.2.5, Table 8, Sl no. I to II(b)	-	100	-
11.2.5, Table 8, Sl no. I to II(c )	-	100	-
11.2.5, Table 8, Sl no. I to II(d)	-	100	-
11.2.6, Table 9, Sl no. I to II(Nominal Size (DN ))	-	100	-
11.2.6, Table 9, Sl no. I to II(a)	-	100	-
11.2.6, Table 9, Sl no. I to II(b)	-	100	-
11.2.6, Table 9, Sl no. I to II(c)	-	100	-
11.2.6, Table 9, Sl no. I to II(r)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 1))	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 2))	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (L)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (a)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (b)	-	100	-
11.2.11, Table 14, (Nominal Size (DN 1))	-	100	-
11.2.11, Table 14, (Nominal Size (DN 2))	-	100	-
11.2.11, Table 14, ( L)	-	100	-
11.2.12, Table 15(Nominal Size (DN ))	-	100	-
11.2.12, Table 15(L)	-	100	-
11.2.12, Table 15(a)	-	100	-
11.2.12, Table 15(b)	-	100	-
11.2.13, Table 16(Nominal Size (DN 1))	-	100	-
11.2.13, Table 16(Nominal Size (DN 2))	-	100	-
11.2.13, Table 16(L)	-	100	-
11.2.13, Table 16(a)	-	100	-
11.2.13, Table 16(b)	-	100	-
11.2.13, Table 16(c)	-	100	-
11.2.13, Table 16(d)	-	100	-
11.2.13, Table 16(r)	-	100	-
11.2.14, Table 17,(Nominal Size (DN ))	-	100	-
11.2.14, Table 17,(a)	-	100	-
11.2.14, Table 17,(b)	-	100	-
11.2.14, Table 17,(b)	-	100	-
11.2.14, Table 17,(r)	-	100	-
11.2.14, Table 17,(j)	-	100	-
11.2.14, Table 17,(k)	-	100	-
11.2.14, Table 17,(d)	-	100	-
11.2.15, Table 18,(Nominal Size (DN 1))	-	100	-
11.2.15, Table 18,(Nominal Size (DN 2))	-	100	-
11.2.15, Table 18,(L)	-	100	-
11.2.15, Table 18,(a)	-	100	-
11.2.15, Table 18,(b)	-	100	-
11.2.15, Table 18,(c)	-	100	-
11.2.15, Table 18,(d)	-	100	-
11.2.15, Table 18,(e )	-	100	-
11.2.15, Table 18,(f )	-	100	-
11.2.15, Table 18,(g)	-	100	-
11.2.16, Table 19, (Nominal Size (DN 1))	-	100	-
11.2.16, Table 19, (Nominal Size (DN 2))	-	100	-
11.2.16, Table 19, (L)	-	100	-
11.2.16, Table 19, (a)	-	100	-
11.2.16, Table 19, (b)	-	100	-
11.2.16, Table 19, (c)	-	100	-
11.2.16, Table 19, (d)	-	100	-
11.2.17, Table 20, (Nominal Size (DN 1))	-	100	-
11.2.17, Table 20, (Nominal Size (DN 2))	-	100	-
11.2.17, Table 20, (L)	-	100	-
11.2.17, Table 20, (a)	-	100	-
11.2.17, Table 20, (b)	-	100	-
11.2.17, Table 20, (c)	-	100	-
11.2.17, Table 20, (d)	-	100	-
11.2.18, Table 21, (Nominal Size (DN ))	-	100	-
11.2.18, Table 21, (L)	-	100	-
11.2.18, Table 21, (a)	-	100	-
11.2.18, Table 21, (b)	-	100	-
11.2.19, Table 22, (Nominal Size (DN ))	-	100	-
11.2.19, Table 22, (L)	-	100	-
11.2.19, Table 22, (c)	-	100	-
11.2.19, Table 22, (d)	-	100	-
Cl. A-1, Table 23, (Nominal Size (DN ))	-	100	-
Cl. A-1, Table 23, (Outside Dia (D))	-	100	-
Cl. A-1, Table 23, (Thickness (I))	-	100	-
Cl. A-1, Table 23, (Height (H))	-	100	-
Cl. A-2, Table 24, (Nominal Size (DN ))	-	100	-
12.1 to 12.5(Coating )	-	100	-

Complete

144

IS 14246 (2013)

Continuously pre-painted galvanized steel sheets and coils (First Revision)

12750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2(Workmanship)	-	500	NA
Cl 4.1(Workmanship)	-	500	NA
Cl 6.2(Press)	-	500	NA
Cl 6.4(Load Resistance)	-	500	NA
Cl 6.5(Cross Hatch)	-	500	NA
Cl 8(Salt Spray)	-	5000	NA
Cl 9(Length, Width, Thickness & Mass)	-	500	NA
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	500	NA
Cl 4.3(Workmanship)	-	2000	NA
Cl 6.3(HWB)	-	500	NA
Cl. 7.3.1(Gloss Bottom Coat)	-	500	-
Cl. 7.3.1(Gloss Top Coat)	-	500	-
Cl. 7.3.2 Table 3(Color Bottom Coat)	-	500	-
Cl. 7.3.2 Table 3(Color Top Coat)	-	500	-

Complete

145

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

7500 View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	100	NA
4(Material)	-	5400	NA
6.1 & Table 1( i) Name of Utensil )	-	100	NA
6.1 & Table 1(ii) Shape of Utensil)	-	100	NA
6.1 & Table 1( Nominal Size, mm)	-	100	NA
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	100	NA
6.1 & Table 1(Outside dia Ф NA)	-	100	NA
6.1 & Table 1(Height NA)	-	100	NA
6.1 & Table 1(Capacity, l NA)	-	100	NA
6.1( Minimum sheet thickness for nominal size )	-	100	NA
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	150	NA
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	150	NA
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	200	NA
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	200	NA
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	200	NA
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	200	NA
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	200	NA
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	200	NA
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	200	NA
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	200	NA
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	300	NA

Complete

0.0

146

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	300	NA
7.1(Manganese %)	-	300	NA
7.1(Sulphur %)	-	300	NA
7.1(Phosphorus %)	-	300	NA
7.1(CE)	-	300	NA
7.1(Silicon %)	-	300	NA
7.1( Nitrogen%)	-	1000	NA
7.1( Aluminium %)	-	300	NA
7.1( Nb)	-	300	NA
7.1( Ti)	-	300	NA
7.1(V)	-	300	NA
7.1( Copper %)	-	300	NA
7.1(Cr)	-	300	NA
7.1(Mo)	-	300	NA
7.1(Ni)	-	300	NA
Cl 8 & Table 3(UTM)	-	2000	NA
Cl 9(Press)	-	500	NA
Cl 11(Workmanship)	-	300	NA
Cl 12 & 13(Length, Width & Thickness)	-	700	NA

Complete

147

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 10.3(UTM)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 11.3(Press)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 12(Sudden Load Applied)	-	2800	For BIS Samples: 1.5 times of BIS testing charges
Cl 15(Length, Width & Thickness)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 18(Weight)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Depth)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Camber)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges

Complete

148

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Deformations and Surface Characteristics)	-	8500	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1(Length, Width & Thickness)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2(Weight)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl 8.1(UTM)	-	2300	For BIS samples: 1.5 times of BIS testing charges
Cl 9.3(Load In One Direction)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 9.4(Load In Other Direction From Bend)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 9.4(Load In Other Direction From Bend)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl 5(Deformations and Surface Characteristics)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 6.1(Nominal Size)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1(Length, Width & Thickness)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 7.2 Table -2 (Nominal Mass)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 8.1 Table 3(Tensile Strength (TS))	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 9.3, Table 4(Bend Test )	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	100	For BIS samples: 1.5 times of BIS testing charges

Complete

149

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

9000 View breakup
Rs.9000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	1500	NA
Cl 10.1(Manufacturing )	-	500	NA
Cl 10.1.1(Manufacturing )	-	500	NA
Cl 12(Workmanship)	-	500	NA
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	3500	NA
Cl 15(Workmanship)	-	500	NA

Complete

0.0

150

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl 7(Workmanship)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl 8(Workmanship)	-	750	For BIS Samples: 1.5 times of BIS testing charges
Cl 9(Workmanship)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2850	For BIS Samples: 1.5 times of BIS testing charges
Cl 13(Workmanship)	-	300	For BIS Samples: 1.5 times of BIS testing charges

Complete

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 info@delhitesthouse.com

Scope List

No Record Found

No Record Found