BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 info@delhitesthouse.com

Scope List

Reset

177 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

35400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Colour)	-	200	For BIS samples: 1.5 times of BIS testing charges
6.2.1(6.1.1 Identification Stripes)	-	200	For BIS samples: 1.5 times of BIS testing charges
7.2(Length)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.4 table -3 & 4(6.1 Dimensions)	-	350	For BIS samples: 1.5 times of BIS testing charges
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	15000	For BIS samples: 1.5 times of BIS testing charges
8.2(Longitudinal Reversion Test)	-	1200	For BIS samples: 1.5 times of BIS testing charges
8.3(Carbon black)	-	2500	For BIS samples: 1.5 times of BIS testing charges
8.4( Melt Flow Rate)	-	1500	For BIS samples: 1.5 times of BIS testing charges
8.5 (Oxidation Induction Time)	-	4000	For BIS samples: 1.5 times of BIS testing charges
8.6(Overall migration)	-	3500	For BIS samples: 1.5 times of BIS testing charges
8.7(Density)	-	1000	For BIS samples: 1.5 times of BIS testing charges
8.8(Tensile Strength for Butt-fusion)	-	1500	For BIS samples: 1.5 times of BIS testing charges
8.9 table-6(Elongation at Break)	-	1000	For BIS samples: 1.5 times of BIS testing charges
8.10(Slow Crack Growth Rate)	-	3500	For BIS samples: 1.5 times of BIS testing charges
5.2(Polyethylene Resin)	-	6000	For BIS samples: 1.5 times of BIS testing charges
5.3(c)(Carbon Black Master Batch)	-	1500	For BIS samples: 1.5 times of BIS testing charges
5.3(d)(Carbon Black Master Batch)	-	1500	For BIS samples: 1.5 times of BIS testing charges

Complete

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Capacity)	-	750	-
5.1.1(Body, Lid, Containers and Grid)	-	500	-
5.1.2(Body, Lid, Containers and Grid)	-	500	-
5.1.3(Body, Lid, Containers and Grid)	-	500	-
5.1.4(Body, Lid, Containers and Grid)	-	500	-
5.2(Safety Relief Device)	-	500	-
5.3(Gasket)	-	500	-
5.4(Handles and Knobs)	-	500	-
5.5(Pressure Regulating Device)	-	500	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	500	-
5.7(Vent Pipe)	-	500	-
5.8(Vent Pipe Nut)	-	500	-
5.9(Spring)	-	500	-
6(CONSTRUCTION)	-	500	-
6.1(Pressure Regulating Device)	-	100	-
6.1.1(Pressure Regulating Device)	-	100	-
6.1.2(Pressure Regulating Device)	-	100	-
6.1.3(Pressure Regulating Device)	-	100	-
6.1.4(Pressure Regulating Device)	-	100	-
6.1.5(Pressure Regulating Device)	-	100	-
6.2(Safety Relief Device)	-	100	-
6.2.1(Safety Relief Device)	-	100	-
6.2.2(Safety Relief Device)	-	100	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	500	-
6.3.2(The cooker shall satisfy the type test prescribed in Annex D.)	-	500	-
6.4.1(Handles and Knobs)	-	100	-
6.4.1.1(Handles and Knobs)	-	2000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
7.2(WORKMANSHIP AND FINISH)	-	200	-
7.3(WORKMANSHIP AND FINISH)	-	200	-
7.4(WORKMANSHIP AND FINISH)	-	500	-
8.1(Air Pressure Test)	-	750	-
8.2(Proof Pressure Test)	-	750	-
8.3(Operating Test for Pressure Regulating Device)	-	750	-
8.4(Test for Safety Pressure Relief Device)	-	1000	-
8.5(Bursting Pressure Test)	-	1500	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	500	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	500	-
8.8(Test for Spring Loaded Mechanism)	-	3000	-
8.9(Test for Spring Loaded Mechanism)	-	2500	-
8.10 (a)(Handles of the cooker- Resistance to Burning)	-	500	-
8.10 (b)(Handles of the cooker- Heat Resistance)	-	500	-
8.10 (c)(Handles of the cooker- Torque Strength)	-	500	-
8.10 (d)(Handles of the cooker- Bending Strength)	-	500	-
8.10 (e)(Handles of the cooker- Fatigue Resistance)	-	500	-
8.10 (f)(Handles of the cooker- Thermal Insualtion Test)	-	500	-
8.10 NOTES (3)(Handles of the cooker - Proof Pressure)	-	150	-
8.10 NOTES (4)(Handles of the cooker)	-	150	-
8.10 NOTES (5)(Handles of the cooker)	-	150	-
8.10 NOTES (6)(Handles of the cooker)	-	150	-
8.11.1 (a)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	250	-
8.11.1 (b)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	250	-
8.11.1 (c)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	250	-
8.11.1.1 (Thermal shock test for externally coated cooker)	-	250	-
8.12.1(Internal Coating)	-	1000	-
8.14(3 Ply Construction Cooker Body)	-	2500	-

Complete

IS 303 (1989)

Plywood for General Purposes -

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	250	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2000	For BIS samples: 1.5 times of BIS testing charges
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	For BIS samples: 1.5 times of BIS testing charges
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges

Complete

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

IS 4989 : Part 4 (2003)

Multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires - Specification

- View breakup
Rs.31700/- (Provisional testing charges)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

16500 View breakup
Rs.16500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli(or thermotolerant bacteria))	-	450	N.A.
6.1.2(Coliform , bacteria)	-	450	N.A.
6.1.3(Faecal Streptococci )	-	450	N.A.
6.1.3(Staphylococcus Aureus)	-	450	N.A.
6.1.4(Sulphite Reducing Anaerobes )	-	450	N.A.
6.1.5(Pseudomonas Aeruginosa )	-	500	N.A.
6.1.6(Yeast and Mould )	-	450	N.A.
6.1.7(Salmonella )	-	500	N.A.
6.1.7(Shigella)	-	500	N.A.
6.1.8(Vibrio cholera )	-	450	N.A.
6.1.8(Vibrio parahemolyticus)	-	450	N.A.
6.2 Table-1 i(Colour)	-	200	N.A.
6.2 Table-1 ii(Odour)	-	100	N.A.
6.2 Table-1 iii(Taste)	-	100	N.A.
6.2 Table-1 iv(Turbidity)	-	200	N.A.
6.2 Table-1 v(Total dissolved solids)	-	200	N.A.
6.2 Table-1 vi(pH)	-	100	N.A.
6.2 Table-2 i(Nitrate (as NO3))	-	200	N.A.
6.2 Table-2 ii(Nitrite (as NO2))	-	200	N.A.
6.2 Table-2 iii(Sulphide (as H2S))	-	200	N.A.
6.2 Table-2 iv(Manganese (as Mn))	-	200	N.A.
6.2 Table-2 v(Copper (as Cu))	-	200	N.A.
6.2 Table-2 vi(Zinc (as Zn))	-	200	N.A.
6.2 Table-2 vii(Flouride (as F))	-	200	N.A.
6.2 Table-2 viii(Barium (as Ba))	-	20	N.A.
6.2 Table-2 ix(Antimony (as Sb))	-	200	N.A.
6.2 Table-2 x(Borates (as B))	-	200	N.A.
6.2 Table-2 xi(Silver (as Ag))	-	200	N.A.
6.2 Table-2 xii(Chloride (as Cl))	-	200	N.A.
6.2 Table-2 xiii(Sulphate (as SO4),)	-	200	N.A.
6.2 Table-2 xiv(Magnesium (as Mg))	-	200	N.A.
6.2 Table-2 xv(Calcium (as Ca))	-	200	N.A.
6.2 Table-2 xvi(Sodium (as Na))	-	200	N.A.
6.2 Table-2 xvii(Alkalinity (as HCO3))	-	200	N.A.
6.2 Table-2 xviii(Selenium (as Se))	-	200	N.A.
6.2 Table-2 xix(Mineral Oil)	-	500	N.A.
6.2 Table-2 xx(Phenolic compounds (as C6H5OH))	-	300	N.A.
6.2 Table-2 xxi(Anionic surface active agents (as MBAS))	-	300	N.A.
6.2 Table-3 i(Arsenic (as As))	-	200	N.A.
6.2 Table-3 ii(Cadmium (as Cd))	-	200	N.A.
6.2 Table-3 iii(Cyanide (as CN))	-	200	N.A.
6.2 Table-3 iv(Chromium (as Cr))	-	200	N.A.
6.2 Table-3 v(Mercury (as Hg))	-	200	N.A.
6.2 Table-3 vi(Lead (as Pb)	-	200	N.A.
6.2 Table-3 vii(Nickel (as Ni))	-	200	N.A.
6.2 Table-3 viii(Polychlorinated biphenyle (PCB))	-	500	N.A.
6.2 Table-3 ix(Polynuclear aromatic hydrocarbons)	-	500	N.A.
6.3(o,p DDT)	-	100	N.A.
6.3(p,p DDT)	-	100	N.A.
6.3(o,p DDE)	-	100	N.A.
6.3(p, DDE)	-	100	N.A.
6.3(o,p DDD)	-	100	N.A.
6.3(p,p DDD)	-	100	N.A.
6.3(γ-HCH (Lindane))	-	100	N.A.
6.3(α-HCH)	-	100	N.A.
6.3(β-HCH)	-	100	N.A.
6.3(δ-HCH)	-	100	N.A.
6.3(α Endosulfan)	-	100	N.A.
6.3(β Endosulfan)	-	100	N.A.
6.3(Endosulfan Sulphate)	-	100	N.A.
6.3(Monocrotophos)	-	100	N.A.
6.3(Ethion)	-	100	N.A.
6.3(Chlorpyrifos)	-	100	N.A.
6.3(Phorate)	-	100	N.A.
6.3(Phorate sulphoxide)	-	100	N.A.
6.3(phorate sulphone)	-	100	N.A.
6.3(2,4-D)	-	100	N.A.
6.3(Butachlor)	-	100	N.A.
6.3(Isoproturon)	-	100	N.A.
6.3(Alachlor)	-	100	N.A.
6.3(Atrazine)	-	100	N.A.
6.3(Methyl Parathion)	-	100	N.A.
6.3(Methyl Paraoxon)	-	100	N.A.
6.3(Malathion)	-	100	N.A.
6.3(Malaoxon)	-	100	N.A.
6.3(Aldrin)	-	100	N.A.
6.3(Dieldrin)	-	500	N.A.

Complete

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	250	For BIS samples: 1.5 times of BIS testing charges
4.1(Sulphur-Percentage by mass)	-	500	For BIS samples: 1.5 times of BIS testing charges
4.1(Phosphorus-Percentage by mass)	-	500	For BIS samples: 1.5 times of BIS testing charges
6.0(Workmanship)	-	300	For BIS samples: 1.5 times of BIS testing charges
8.0(Straightness)	-	600	For BIS samples: 1.5 times of BIS testing charges
11.2(Surface Protection)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.1.1(Yield Stress)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.1.2(Elongation)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.1.3(Tensile Strength)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.2(Flattening Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.3(Bend Test (Strip))	-	250	For BIS samples: 1.5 times of BIS testing charges
13.4(Bend Test (Whole Tube))	-	250	For BIS samples: 1.5 times of BIS testing charges
13.5(Drift Expansion Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.6(Crush Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
19.1.3(Height of Internal Fin)	-	200	For BIS samples: 1.5 times of BIS testing charges
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	300	For BIS samples: 1.5 times of BIS testing charges
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	300	For BIS samples: 1.5 times of BIS testing charges

Complete

IS 8963 (2006)

Chlorpyrifos, technical - (First Revision) specification

2400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 Table 1(Water content)	-	400	For BIS samples: 1.5 times of BIS testing charges
3.2 Table 1(Acidity)	-	400	For BIS samples: 1.5 times of BIS testing charges
3.2 Table 1(Material insoluble in acetone)	-	0	For BIS samples: 1.5 times of BIS testing charges
3.2 Table 1(Chlorpyrifos content)	-	1000	For BIS samples: 1.5 times of BIS testing charges
3.1(Description )	-	200	For BIS samples: 1.5 times of BIS testing charges

Complete

IS 15644 (2006)

Safety of electric toys

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	500	-
8.0(Power Input)	-	500	-
9.0(Heating and abnormal operation)	-	1000	-
10.0(Electrical strength at operating temperature)	-	1500	-
11.1(Moisture resistance)	-	2000	-
11.2(Resistant to humidity)	-	1500	-
12.0(Electric strength at room temperature)	-	1000	-
13.0(Mechanical strength)	-	500	-
14.1(Construction)	-	50	-
14.2(Construction)	-	50	-
14.3(Construction)	-	50	-
14.4(Construction)	-	50	-
14.5(Construction)	-	50	-
14.6(Construction)	-	50	-
14.7(Construction)	-	100	-
14.8(Construction)	-	100	-
14.9(Construction)	-	100	-
14.1(Construction)	-	250	-
14.11(Construction)	-	50	-
14.12(Construction)	-	50	-
14.13(Construction)	-	50	-
14.14(Construction)	-	50	-
15.1(Protection of cords and wires)	-	250	-
15.2(Protection of cords and wires)	-	250	-
16.0(Components)	-	500	-
17 Table-1(Screws and connections)	-	250	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	250	-
18.0(Clearance and creepage distance)	-	500	-
19.1(Ball pressure test IEC 60695-10-2)	-	500	-
19.2.1(Glow wire test IEC 60695-2-11)	-	750	-
19.2.2(Needle flame test)	-	1000	-
20.0(Radiation, toxicity and similar hazards)	-	500	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	625	-
9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	625	-
9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	625	-

Complete

100

IS 14433 (2007)

Infant milk substitutes - Specification (First Revision)

21100 View breakup
Rs.21100.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Description)	-	250	N.A.
6.3(Flavour taste and odour)	-	250	N.A.
6.4(Scorched particles)	-	250	N.A.
6.5(Linoleate)	-	250	N.A.
6.5(Vitamin E (for type 2 only))	-	750	N.A.
6.9.1(Bacterial count)	-	500	N.A.
6.9.2(Coliform count)	-	500	N.A.
6.9.3(Escherichia coli)	-	500	N.A.
6.9.4(Staphylococcus Aureus)	-	500	N.A.
6.9.5(Salmonella and shigella)	-	500	N.A.
6.9.6(Yeast and mould count)	-	500	N.A.
6.1(Moisture)	-	250	N.A.
6.1(Milk protein)	-	250	N.A.
6.1(Milk fat)	-	125	N.A.
6.1(Total fat)	-	125	N.A.
6.1(Total ash)	-	400	N.A.
6.1(Acid insoluble ash)	-	400	N.A.
6.1(Insolubility index)	-	200	N.A.
6.1(Solubility)	-	200	N.A.
6.1(Vitamin A (as Retinol))	-	750	N.A.
6.1(Iron)	-	250	N.A.
6.1(Lead)	-	250	N.A.
6.1(Arsenic)	-	250	N.A.
6.1(Tin)	-	250	N.A.
6.1(Cadmium)	-	250	N.A.
6.1(Added Vitamin D (expressed as chole-calciferol))	-	750	N.A.
6.1(Thiamin)	-	750	N.A.
6.1(Niacin)	-	750	N.A.
6.1(Riboflavin)	-	750	N.A.
6.1(Vitamin B6)	-	750	N.A.
6.1(Vitamin B12)	-	750	N.A.
6.1(Folic acid)	-	500	N.A.
6.1(Pentothenic acid)	-	500	N.A.
6.1(Biotin )	-	500	N.A.
6.1(Vitamin C)	-	750	N.A.
6.1(Vitamin K)	-	750	N.A.
6.1(Calcium)	-	300	N.A.
6.1(Phosphorus)	-	300	N.A.
6.1(Iodine)	-	500	N.A.
6.1(Copper)	-	300	N.A.
6.1(Manganese)	-	300	N.A.
6.1(Zinc)	-	300	N.A.
6.1(Sodium)	-	200	N.A.
6.1(Potassium)	-	200	N.A.
6.1(Chloride)	-	200	N.A.
6.1(Magnesium)	-	200	N.A.
6.1(Choline)	-	200	N.A.
6.1(Selenium)	-	300	N.A.
6.1(Vitamin E ( as alpha tocopherol compounds))	-	750	N.A.

Complete

101

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	100	For BIS samples 1.5 times of BIS testing charges
4(Size of fitting)	-	100	For BIS samples 1.5 times of BIS testing charges
5.1 Table-1 Fig.1(Dimension of Socket length)	-	100	For BIS samples 1.5 times of BIS testing charges
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	100	For BIS samples 1.5 times of BIS testing charges
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	150	For BIS samples 1.5 times of BIS testing charges
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	750	For BIS samples 1.5 times of BIS testing charges
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	1250	For BIS samples 1.5 times of BIS testing charges
8(Marking)	-	100	For BIS samples 1.5 times of BIS testing charges

Complete

102

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1, Table-1, Fig-1(Nominal size)	-	100	NA
3.2.1, Table-1, Fig-1(B)	-	100	NA
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	100	NA
3.2.1, Table-1, Fig-1(Plumbing)	-	100	NA
Clause 3.2.2, and Fig. 2(Nominal size)	-	100	NA
Clause 3.2.2, and Fig. 2.(B)	-	100	NA
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	100	NA
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	100	NA
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	500	NA
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	500	NA
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	500	NA
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	500	NA
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	500	NA
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	500	NA
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	1500	NA
3.1(General)	-	500	NA

Complete

103

IS 710 (2010)

Marine plywood - Specification (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	160	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
6.2(DIMENSIONS)	-	160	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
6.3(DIMENSIONS)	-	180	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.1(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.2(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.3(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.5(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.1(MOISTURE CONTENT)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.4(Tensile strength)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.5(Mycological test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.5 , 9.1.3.1.1(Mycological test)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.5 , 9.1.3.1.2(Mycological test)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.6 (Table 3)(Static bending strength)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.7 (Table 4)(Wet bending strength)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.8(Retention of preservative)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
11.1(MARKING)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
11.2(MARKING)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
6.3(DIMENSIONS)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	400	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	400	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-

Complete

104

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

117000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2000	-
1.6(Power interface .)	-	5000	-
1.7(Markings and instructions)	-	3000	-
2.1(Protection from electric shock and energy hazards)	-	5000	-
2.2(SELV circuits)	-	5000	-
2.3(TNV circuits)	-	3000	-
2.4(Limited current circuits)	-	6000	-
2.5(Limited power sources .)	-	6000	-
2.6(Provisions for earthing and bonding)	-	8000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	3000	-
2.8(Safety interlocks)	-	2000	-
2.8.2/2.8.5(Interlock switches)	-	2000	-
2.8.7(Switches and Relay)	-	1000	-
2.9(Electrical insulation)	-	8000	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	500	-
2.10.5.4(Opto-coupler)	-	100	-
2.10.5.6(Thin sheet materials)	-	100	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.5.12(Wires in wound components)	-	500	-
2.10.5.13(Winding wire)	-	100	-
2.10.5.14(Additional insulation in wound components)	-	200	-
2.10.6(PCB material)	-	300	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	2000	-
2.10.8.4(Abrasion resistance test)	-	2000	-
2.10.9(Thermal Cycling)	-	2000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	200	-
2.10.12(Enclosed and sealed parts)	-	200	-
3.1(General)	-	500	-
3.1.4(Internal wire)	-	500	-
3.2(Connection to a mains supply)	-	1000	-
3.2.4(Appliance inlet /connector)	-	500	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	3000	-
4.2(Mechanical strength)	-	1000	-
4.2.8(Cathode Ray Tubes)	-	1000	-
4.3(Design and construction)	-	2000	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	3000	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	1000	-
4.3.13.2(Ionizing radiation)	-	1000	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	-
4.3.13.5(LED, laser class)	-	1000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	2000	-
5.1(Touch current and protective conductor curren)	-	2000	-
5.2(Electric strength)	-	3000	-
5.3(Abnormal operating and fault conditions)	-	3000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
Annex B(Motor tests under abnormal conditions)	-	2000	-
Annex C(Transformers)	-	2000	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	-
Annex EE(Household and home/ office document/ media shredders)	-	1000	-

Complete

105

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT)	-	1000	N.A.
3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-	250	N.A.
4/4.1.1(Elongation at break (Class A' Tubes))	-	1500	N.A.
4/4.1.1(Elongation at break (Class B' Tubes))	-	1500	N.A.
4/4.1.2( Strength of Splice (Class A' Tubes))	-	1500	N.A.
4/4.1.2( Strength of Splice (Class B' Tubes))	-	1500	N.A.
4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes))	-	2500	N.A.
4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes))	-	2500	N.A.
4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B))	-	3000	N.A.
5(AIR TIGHTNESS)	-	1500	N.A.

Complete

106

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

11750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.3 and 3.4(Table 1, S. no i)(Sodium carbonate (as Na2CO3), percent by mass)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no ii)(Sodium hydroxide (as NaOH), percent by mass)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no iii)(Chlorides (as Cl– ), percent by mass)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no iv)(Sulphates (as SO4), percent by mass)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no v)(Silicates (as SiO2), percent by mass)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no vi)(Iron (as Fe))	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no vii)(Copper)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no viii)(Manganese)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no ix)(Chlorates and per-chlorates)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no x)(Matter insoluble water, percent by mass)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no xi)(Total mercury)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 3.3 and 3.4(Table 1, S. no xii)(Sodium hydroxide)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

107

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	2000	-
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	250	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	500	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	700	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3000	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	800	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	800	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1000	-

Complete

108

IS 544 (2014)

Groundnut oil - Specification (Third Revision)

22500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.24600.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no i)(Moisture and insoluble impurities)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ii)(Colour on the Lovibond scal)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iii)(Refractive index)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iv)(Specific gravity)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no v)(Saponification value)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no vi)(Iodine value)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7(Table 1, S. no vii)(Acid value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no viii)(Unsaponifiable matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ix)(Flash point Pensky-Martens)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no x)(Hexane)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no xi)(Bellier turbidity)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no i)(Lead)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no ii)(Arsenic)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iii)(Cadmium)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iv)(Mercury)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl. 7(MARKING)	-	100	For BIS samples: 1.5 times of BIS testing charges

Complete

109

IS 546 (2014)

Mustard oil - Specification (Third Revision)

24600 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.7000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Description)	-	300	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Moisture and Insoluble Impurities)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Colour on Lovibond Scale)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Refractive Index at 40 degree )	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Saponification Value)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Iodine Value)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Acid Value)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Unsaponifiable Matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Natural Essential Oils)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Bellier Turbidity temperature)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Flash Point Pensky Martens)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Hexane)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7 Table-1(Polybromide Test)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Lead)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Arsenic)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Cadmium)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3 Table-2(Mercury (Total))	-	400	For BIS samples: 1.5 times of BIS testing charges

Complete

110

IS 3448 (2014)

Rice bran oil - Specification (Third Revision)

20150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	200	N.A.
5.2(Clarity and adulteration)	-	2900	N.A.
5.3(Non-edible oils presence)	-	2400	N.A.
5.4(aflatoxin)	-	1000	N.A.
5.5(Metal contaminants and pesticide residues)	-	2400	N.A.
5.6(permitted antioxidants and antioxidant synergists)	-	1200	N.A.
5.7, Table 1(Moisture and insoluble impurities)	-	750	N.A.
5.7, Table 1(Colour in a 1 inch cell on the Lovibond scale, expressed as (Y + 5R))	-	400	N.A.
5.7, Table 1(Refractive index at 40ºC)	-	500	N.A.
5.7, Table 1(Specific gravity at 30º/30ºC)	-	500	N.A.
5.7, Table 1(Saponification value)	-	750	N.A.
5.7, Table 1(Iodine value (Wijs)	-	750	N.A.
5.7, Table 1(Acid value)	-	500	N.A.
5.7, Table 1(Unsaponifiable matter,)	-	500	N.A.
5.7, Table 1(Flash point Pensky-Martens (closed), ºC)	-	500	N.A.
5.7, Table 1(Hexane)	-	500	N.A.
5.7, Table 1(Oryzanol,)	-	500	N.A.
5.8.1.2(aflatoxin)	-	1500	N.A.
5.8.1.3, Table 2(Pb)	-	300	N.A.
5.8.1.3, Table 2(As)	-	300	N.A.
5.8.1.3, Table 2(Cd)	-	300	N.A.
5.8.1.3, Table 2(Hg)	-	300	N.A.

Complete

111

IS 4276 (2014)

Soybean oil - Specification (Second Revision)

23950 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.23950.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. i)(Moisture and insoluble impurities, percent by mass, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ii)(Colour on the Lovibond scale, expressed as (Y + 5R) not deeper than)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iii)(Refractive index at 40ºC)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iv)(Saponification value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. v)(Iodine value (Wijs))	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. vi)(Acid value, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No.vii)(Unsaponifiable matter, percent by mass, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No.viii)(Flash point Pensky-Martens (closed), ºC, Min)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ix)(Hexane, ppm, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. x)(Phosphorous content, ppm, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. xi)(Insoluble bromide test)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.i)(Lead, mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.ii)(Arsenic, mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iii)(Cadmium, mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iv)(Mercury (total) mg/kg, Max)	-	200	For BIS samples: 1.5 times of BIS testing charges

Complete

112

IS 4277 (2014)

Sunflower oil - Specification (Second Revision)

19400 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.19400.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.2.1(Description)	-	62.50	For BIS samples: 1.5 times of BIS testing charges
Cl.5.3(Description)	-	6750	For BIS samples: 1.5 times of BIS testing charges
Cl.5.4(Description)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl.5.5(Description)	-	3600	For BIS samples: 1.5 times of BIS testing charges
Cl.5.6(Description)	-	1300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. i)(Moisture and insoluble impurities, percent by mass, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ii)(Colour on the Lovibond scale, expressed as (Y + 5R) not deeper than)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iii)(Refractive index at 40ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. iv)(Saponification value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. v)(Iodine value (Wijs))	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. vi)(Acid value, Max)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No.viii)(Flash point Pensky-Martens (closed), ºC, Min)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.7, Table-1, S. No. ix)(Hexane, ppm, Max)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.i)(Lead, mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.ii)(Arsenic, mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iii)(Cadmium, mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl.5.8.1.3, Table-2, S. No.iv)(Mercury (total) mg/kg, Max)	-	300	For BIS samples: 1.5 times of BIS testing charges

Complete

113

IS 8361 (2014)

Palmolein - Specification (First Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Clarity of material)	-	200	-
5.3(non-edible oils and adulterants)	-	3000	-
5.4(aflatoxin)	-	1500	-
5.5(Metal contaminants and pesticide residues)	-	3300	-
5.7, Table 1(Moisture and insoluble impurities)	-	500	-
5.7, Table 1(Colour in a 5¼ inch cell on the Lovibond scale)	-	250	-
5.7, Table 1(Refractive index at 40ºC)	-	500	-
5.7, Table 1(Saponification value)	-	500	-
5.7, Table 1(Iodine value)	-	750	-
5.7, Table 1(Acid value)	-	300	-
5.7, Table 1(Unsaponifiable matter)	-	300	-
5.7, Table 1(Peroxide value)	-	500	-
5.7, Table 1(Cloud point)	-	500	-
5.7, Table 1(Hexane)	-	1500	-
5.7, Table 1(Flash point Pensky-Martens (closed))	-	300	-
5.7, Table 1(B.R. Reading at 40°C)	-	300	-
5.2(adultrants)	-	2800	-
5.6(permitted antioxidants)	-	1500	-

Complete

114

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i)(Moisture (IS 116231or 16072))	-	500	-
Table 1 (ii)(Milk protein in milk solids not fat (IS 72192))	-	500	-
Table 1 (iii)(Milk fat (IS 117213) or Annex B)	-	500	-
Table 1 (iv)(Insolubility index (IS 12759))	-	500	-
Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433)	-	500	-
Table 1 (vi)(Titratable acidity (IS 11766))	-	500	-
Table 1 (vii)(Lactate content (IS 11202))	-	500	-
Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500))	-	500	-
Table 1 (ix)(Bacterial count (IS 5402))	-	500	-
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	500	-
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	500	-
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	500	-
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	500	-
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	250	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	250	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	500	-

Complete

115

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	100	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	100	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	100	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1000	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	500	-
3.2(Unlaminated Fabric Mass )	-	200	-
3.3.1(Bottom seam (IS 10789))	-	100	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	200	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	100	-
5.2 and Table 1 iv(Picks per dm )	-	100	-
4.2 and Table 1 v(Mass of sack )	-	200	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1000	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	1000	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8000	-
4.2 and Table 1 x(Ash content )	-	800	-

Complete

116

IS 16046 (2015)

Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from them, for Use in Portable Applications ( First Revision )

- View breakup
Rs.85,000/- Cells, Rs.78,000/- Battery

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

117

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification - IS 444)	-	50	NA
5(Lining - IS 444)	-	60	For BIS samples 1.5 times of BIS testing charges
5(Reinforcement - IS 444)	-	65	For BIS samples 1.5 times of BIS testing charges
5(Cover - IS 444)	-	60	For BIS samples 1.5 times of BIS testing charges
5(Lining and Cover - IS 444)	-	65	For BIS samples 1.5 times of BIS testing charges
6.1- Table 1(Internal diameters - ISO 4671)	-	125	For BIS samples 1.5 times of BIS testing charges
6.2(Concentricity - ISO 4671)	-	125	For BIS samples 1.5 times of BIS testing charges
6.3(Length -IS 4671)	-	0	NA
6.4( thickness of the lining plus cover - ISO 4671)	-	0	NA
6.4(If the cover is fluted, the depth of the flutes - ISO 4671)	-	0	NA
7.1 - Table 2( tensile strength of Lining - ISO 37 )	-	250	For BIS samples 1.5 times of BIS testing charges
7.1 - Table 2( tensile strength of Cover - ISO 37 )	-	250	For BIS samples 1.5 times of BIS testing charges
7.1 - Table 2(elongation at break of Lining - ISO 37)	-	250	For BIS samples 1.5 times of BIS testing charges
7.1 - Table 2(elongation at break of Cover - ISO 37)	-	250	For BIS samples 1.5 times of BIS testing charges
7.1 - Table 2(Change in tensile strength of Cover from original value after ageing(max) - ISO 188 and ISO 37)	-	500	For BIS samples 1.5 times of BIS testing charges
7.1 - Table 2(Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-	500	For BIS samples 1.5 times of BIS testing charges
7.1 - Table 2(Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-	500	For BIS samples 1.5 times of BIS testing charges
7.2 - Table 3(Proof pressure at 23 °C - ISO 1402)	-	2500	For BIS samples 1.5 times of BIS testing charges
7.2 - Table 3(Change in length at proof pressure - ISO 1402)	-	0	NA
7.2 - Table 3(Minimum burst pressure - ISO 1402)	-	0	NA
7.2 - Table 3(Adhesion between components - ISO 8033)	-	0	For BIS samples 1.5 times of BIS testing charges
7.2 - Table 3(Ozone resistance - ISO 7326)	-	1000	For BIS samples 1.5 times of BIS testing charges
7.2 - Table 3(Flexibility at 23 °C - Method A of ISO 1746)	-	500	For BIS samples 1.5 times of BIS testing charges
7.2 - Table 3(Low-temperature flexibility - Method B of ISO 4672)	-	500	For BIS samples 1.5 times of BIS testing charges
7.1 - Table 2(Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-	500	For BIS samples 1.5 times of BIS testing charges

Complete

118

IS 446 (2017)

Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision)

6750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Classification)	-	50	For BIS samples: 1.5 times of BIS testing charges
Cl 5(Materials and construction)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1 & Table 1(Internal diameters and tolerances)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.2(Concentricity)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.3(Tolerance on length)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.4(Minimum thickness of lining and cover-Type 1 )	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.4(Minimum thickness of lining and cover-Type 1 )	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.4(Minimum thickness of lining and cover-Type 2 )	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.4(Minimum thickness of lining and cover-Type 2 )	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.4(Minimum thickness of lining and cover-Type 3)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.4(Minimum thickness of lining and cover-Type 3)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Minimum tensile strength)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Minimum tensile strength)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Minimum elongation at break)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Minimum elongation at break)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to ageing-Change in tensile strength from original value (max.) )	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to ageing-Change in tensile strength from original value (max.) )	-	500	For BIS samples: 1.5 times of BIS testing charges
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Lining of its original value)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Cover of its original value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (class A))	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (class A))	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class B only) )	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class B only) )	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class C only) )	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class C only) )	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Proof pressure)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Proof pressure)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Proof pressure)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Change in length at maximum working pressure)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2, Table 3(Change in Diameeter at Maximum working Pressure)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Minimum burst pressure)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Minimum burst pressure)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Adhesion between components)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Ozone resistance)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Flexibility at 23 °C)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Low-temperature flexibility)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

119

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

120

IS 7021 (2017)

Protein - Rich food supplements for infants and pre - School children - Specification (First Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.3 Table 2(Acid insoluble Ash)	-	500	-
4.2.4(Urease activity)	-	500	-
4.3.3 Table 2(Crude Fibre)	-	500	-
4.3.3 Table 2(Total Ash)	-	500	-
4.3.3 Table 2(Coliform count)	-	500	-
4.2.2(Aflatoxin)	-	750	-
4.3.3 Table 2(Bacterial Count)	-	500	-
4.2.3(Gossypol (free gossypol Content ) )	-	500	-
4.2.5 Table 1(Thiamine )	-	750	-
4.2.5 Table 1(Riboflavin)	-	750	-
4.2.5 Table 1(Vitamin B12)	-	750	-
4.2.3(Gossypol (Total gossypol Content ) )	-	500	-
4.2.5 Table 1(Vitamin D)	-	750	-
4.2.5 Table 1(Niacin)	-	750	-
4.2.5 Table 1(Iron)	-	250	-
4.3.3 Table 2(Fat)	-	300	-
4.3.3 Table 2(Moisture)	-	500	-
4.2.1(Protein)	-	500	-
4.3.3 Table 2(Protein)	-	500	-
4.2.5 Table 1(Vitamin C)	-	750	-
4.2.5 Table 1(Folate)	-	500	-
4.2.5 Table 1(Vitamin A)	-	750	-
4.2.5 Table 1(Calcium )	-	250	-
4.3.1(Description)	-	250	-
4.3.2(Flavour)	-	200	-

Complete

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 info@delhitesthouse.com

Scope List

No Record Found

No Record Found

No Record Found

No Record Found