BIS - LIMS (Laboratory Information Management System)

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

198-199, MIE, Industrial Area, Phase-1, Bahadurgarh, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

9818233966 info@alphatesthouse.com

Scope List

Reset

116 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

ALL

7600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Form and Description)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no i)(Sodium carbonate (as Na2CO3), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no ii)(Sodium hydroxide (as NaOH), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no iii)(Chlorides (as Cl– ), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no iv)(Sulphates (as SO4), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no v)(Silicates (as SiO2), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vi)(Iron (as Fe))	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vii)(Copper)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no viii)(Manganese)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no ix)(Chlorates and per-chlorates)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no x)(Matter insoluble water, percent by mass)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xi)(Total mercury)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xii)(Sodium hydroxide)	-	600	-
5.2(Marking)	-	0	-
Cl-3.2(Relative Density of Caustic Soda Lye)	-	600	-
Cl-3.2(Relative Density of Caustic Soda Lye)	-	600	-

08 May, 2028

-
Included w.e.f. 31.07.2025

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

ALL

53000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-

08 May, 2028

-
Included w.e.f 04.08.2025

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

380000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	-
3.3(Specifications)	-	5000	-
3.5(Safety specification)	-	25000	-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	150000	-
4(Marking)	-	1000	-
5(Operating Life Test)	-	5000	-
3.1, Table-1, i) a)(Hardware specification)	-	5000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
3.1, Table-1, i) g)(Teletext)	-	5000	-
3.1, Table-1, i) h)(Multi-language support)	-	5000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	5000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
3.1, Table-1, i) n)(Data services)	-	5000	-
3.1, Table-1, i) p)(OSD)	-	5000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	5000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
3.1, Table-1, i) s)(Time)	-	5000	-
3.1, Table-1, i) t)(Digital TV output)	-	5000	-
3.4, Table-2, i) b)(Frequency)	-	5000	-
3.4, Table-2, i) a)(Input voltage range)	-	5000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	-
3.1, Table-1, ii) c)(Network evolution)	-	5000	-
3.4, Table-2, iii) c)(RF input impedance)	-	5000	-
3.1, Table-1, ii) d)(Services available)	-	5000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	5000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	5000	-
3.1, Table-1, ii) h)(Hidden Services)	-	5000	-
3.4, Table-2, iii) b)(Input frequency range)	-	5000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	-
3.1, Table-1, ii) k)(RF input signal)	-	5000	-
3.1, Table-1, ii) m)(LNB supply current)	-	5000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	5000	-
3.1, Table-1, ii) p)(LNB Control)	-	5000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
3.4, Table-2, iv) c)(RF input impedance)	-	5000	-
3.4, Table-2, iv) b)(Input frequency range)	-	5000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
3.4, Table-2, v)(Symbol rate)	-	5000	-
3.4, Table-2, vi)(RF input return loss)	-	5000	-
3.4, Table-2, vii)(DisEqC)	-	5000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	5000	-
3.4, Table-2, ix)(Operating humidity range)	-	5000	-
3.4, Table-2, x)(Power consumption)	-	5000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	-
3.1, Table-1, v) a)(Remote Control)	-	5000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	-
3.1, Table-1, v) c)(Support package)	-	5000	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	0	-
3.3(Specifications)	-	0	-
3.5(Safety specification)	-	0	-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	0	-
4(Marking)	-	0	-
5(Operating Life Test)	-	0	-
3.1, Table-1, i) a)(Hardware specification)	-	0	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	0	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	0	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	0	-
3.1, Table-1, i) e)(Active Format descriptors)	-	0	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	0	-
3.1, Table-1, i) g)(Teletext)	-	0	-
3.1, Table-1, i) h)(Multi-language support)	-	0	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	0	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	0	-
3.1, Table-1, i) m)(Service demultiplexing)	-	0	-
3.1, Table-1, i) n)(Data services)	-	0	-
3.1, Table-1, i) p)(OSD)	-	0	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	0	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	0	-
3.1, Table-1, i) s)(Time)	-	0	-
3.1, Table-1, i) t)(Digital TV output)	-	0	-
3.4, Table-2, i) b)(Frequency)	-	0	-
3.4, Table-2, i) a)(Input voltage range)	-	0	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	0	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	0	-
3.1, Table-1, ii) c)(Network evolution)	-	0	-
3.4, Table-2, iii) c)(RF input impedance)	-	0	-
3.1, Table-1, ii) d)(Services available)	-	0	-
3.1, Table-1, ii) e)(Selection via Service List)	-	0	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	0	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	0	-
3.1, Table-1, ii) h)(Hidden Services)	-	0	-
3.4, Table-2, iii) b)(Input frequency range)	-	0	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	0	-
3.1, Table-1, ii) k)(RF input signal)	-	0	-
3.1, Table-1, ii) m)(LNB supply current)	-	0	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	0	-
3.1, Table-1, ii) p)(LNB Control)	-	0	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	0	-
3.4, Table-2, iii) a)(Input level per carrier)	-	0	-
3.4, Table-2, iv) c)(RF input impedance)	-	0	-
3.4, Table-2, iv) b)(Input frequency range)	-	0	-
3.4, Table-2, iv) a)(Input level per carrier)	-	0	-
3.4, Table-2, v)(Symbol rate)	-	0	-
3.4, Table-2, vi)(RF input return loss)	-	0	-
3.4, Table-2, vii)(DisEqC)	-	0	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	0	-
3.4, Table-2, ix)(Operating humidity range)	-	0	-
3.4, Table-2, x)(Power consumption)	-	0	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	0	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	0	-
3.1, Table-1, v) a)(Remote Control)	-	0	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	0	-
3.1, Table-1, v) c)(Support package)	-	0	-

08 May, 2028

-
Included w.e.f. 31.07.2025 Exclusion: 3.5 (Safety specification)

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

ALL

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	2000	-
5.1(Tensile Adhesion Strength )	-	2000	-
5.1(Tensile Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength )	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.3(OpenTime)	-	2000	-
5.4(Adjustment Time)	-	2000	-
5.5(Slip (Required for Vertical Application Only))	-	1000	-
5.6(Deformability (Required for VerticalApplication Only))	-	1000	-
8.2(Marking)	-	0	-

08 May, 2028

-
Included w.e.f.24.06.2025

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	1000	-
Clause 7.3, Annex G(Average Breaking Load)	-	1000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	1000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	1000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	1000	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	1000	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	1000	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	1000	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	1000	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	1000	-
Clause 7.1.3 (Colour and Texture)	-	1000	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	1000	-
Clause 7.1.1 (General Quality)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	1000	-
Clause 3.20(Spacer nibs)	-	1000	-
10(Marking)	-	1000	-
cl.5(Cement)	-	1000	-
5.2(Mineral Admixture)	-	1000	-
5.3(Chemical Admixtures)	-	1000	-
5.4(Coarse and Fine Aggregates)	-	1000	-
5.5(Pigments)	-	1000	-
5.6(Water)	-	1000	-

08 May, 2028

-
Included w.e.f.24.06.2025

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

ALL

53000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2, Table 4(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7, Table 20("Marking ")	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-

08 May, 2028

-
Included w.e.f 04.08.2025

IS 17550 : PART 3 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	135000	5% Discount for BIS
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	135000	5% Discount for BIS
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	135000	5% Discount for BIS
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	135000	5% Discount for BIS
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	135000	5% Discount for BIS
4.2(Steady State Power Consumption)	-	135000	5% Discount for BIS
4.3(Defrost and Recovery Energy and temperature change)	-	135000	5% Discount for BIS
4.4(Defrost Frequency)	-	135000	5% Discount for BIS
4.5(Number of Test Points and Interpolations)	-	135000	5% Discount for BIS
4.6(Load Processing Efficiency)	-	135000	5% Discount for BIS
4.7(Specified Auxiliaries)	-	135000	5% Discount for BIS
4.8(Volumn Determination)	-	135000	5% Discount for BIS
6(Determination of Energy Consumption)	-	135000	5% Discount for BIS
Annex B(Determination of Steady state Power & Temperature)	-	135000	5% Discount for BIS
Annex C(Defrost and Recovery Energy and temperature change)	-	135000	5% Discount for BIS
Annex D(Defrost Interval)	-	135000	5% Discount for BIS
Annex E(Interpolation of Results)	-	135000	5% Discount for BIS
Annex F(Energy Consumption of specified auxiliaries)	-	135000	5% Discount for BIS
Annex G(Determination of Load Processing Efficiency)	-	135000	5% Discount for BIS
Annex H(Determination of Volume)	-	135000	5% Discount for BIS

08 May, 2028

-
Included w.e.f.06.08.2025

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

345000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	345000	5% Discount for BIS
7(Cooling Capacity Test)	-	345000	5% Discount for BIS
8(Freezing Capacity Test)	-	345000	5% Discount for BIS
9("Automatic Ice-Making Capacity Test")	-	345000	5% Discount for BIS
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	345000	5% Discount for BIS
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	345000	5% Discount for BIS
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	345000	5% Discount for BIS
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	345000	5% Discount for BIS
6(Storage Test)	-	345000	5% Discount for BIS
7(Cooling Capacity Test)	-	345000	5% Discount for BIS
8(Freezing Capacity Test)	-	345000	5% Discount for BIS
9("Automatic Ice-Making Capacity Test")	-	345000	5% Discount for BIS
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	345000	5% Discount for BIS
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	345000	5% Discount for BIS
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	345000	5% Discount for BIS
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	345000	5% Discount for BIS

08 May, 2028

-
Included 06.08.2025

IS 12084 (2018)

Morpholine - Specification (First Revision)

ALL

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 - Table 1 - Sl No - vi(Chloride ( as Cl ) I IS 3025 (Part 32)	-	500	-
4.3 - Table 1 - Sl No - x(Silica ( as SiO2 ) - IS 3025 (Part 35))	-	500	-
4.3 - Table 1 - Sl No - ix(Nickel ( as Ni ) - IS 3025 (Part 54))	-	500	-
4.3 - Table 1 - Sl No - viii(Copper ( as Cu ) - IS 3025 (Part 42))	-	500	-
4.3 - Table 1 - Sl No - vii(Iron ( as Fe ) - IS 3025 (Part 53))	-	500	-
4.3 - Table 1 - Sl No - vi(Ash content - Annex E)	-	500	-
4.3 - Table 1 - Sl No - v(Residue, on evaporation - Annex D)	-	500	-
4.3 - Table 1 - Sl No - iv(Boiling range for for 90 percent recovery - IS 5298)	-	500	-
4.3 - Table 1 - Sl No - iii(Colour (Pt-Co-Scale ) - IS 3025(Part 4))	-	500	-
4.3 - Table 1 - Sl No - ii(Relative density, 20/20 oC - Annex C)	-	500	-
4.3 - Table 1 - Sl No - i(Purity (as Morpholine) - Annex B)	-	500	-
4.2(IS 11255 (Part 6))	-	500	-
4.1(Description)	-	500	-
4.1(Requirement)	-	500	-
4.2(The material shall not contain any free ammonia, IS 11255 part-6)	-	500	-
5.1(Packing)	-	500	-
5.2(Marking)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 1(Purity (as Morpholine), percent by mass, Annex B)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 2(Relative density, 20/20oC, Annex C)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 3(Colour (Pt-Co-Scale ), IS 3025 part-4)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 4(Boiling range, IS 5298)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 5(Residue, on evaporation, mg/l, Annex D)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 6(Ash content, g/100 ml, Annex E)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 7(Iron ( as Fe ), ppm, IS 3025 part 53)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 8(Copper ( as Cu ), ppm, IS 3025 (Part 42))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 9(Nickel ( as Ni ), ppm, IS 3025 (Part 54))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 10(Silica ( as SiO2 ), ppm, IS 3025 (Part 35))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 11(Chloride ( as Cl), ppm, IS 3025 (Part 32))	-	0	-
4.1(Requirement)	-	0	-
4.2(The material shall not contain any free ammonia, IS 11255 part-6)	-	0	-
5.1(Packing)	-	0	-
5.2(Marking)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 1(Purity (as Morpholine), percent by mass, Annex B)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 2(Relative density, 20/20oC, Annex C)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 3(Colour (Pt-Co-Scale ), IS 3025 part-4)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 4(Boiling range, IS 5298)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 5(Residue, on evaporation, mg/l, Annex D)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 6(Ash content, g/100 ml, Annex E)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 7(Iron ( as Fe ), ppm, IS 3025 part 53)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 8(Copper ( as Cu ), ppm, IS 3025 (Part 42))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 9(Nickel ( as Ni ), ppm, IS 3025 (Part 54))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 10(Silica ( as SiO2 ), ppm, IS 3025 (Part 35))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 11(Chloride ( as Cl), ppm, IS 3025 (Part 32))	-	0	-

08 May, 2028

-
Included w.e.f 28.07.2025

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

ALL

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	500	-
8.9 table-6(Elongation at Break)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	500	-
8.7(Density)	-	500	-
8.5 (Oxidation Induction Time)	-	500	-
8.4( Melt Flow Rate)	-	500	-
8.2(Longitudinal Reversion Test)	-	500	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	500	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	500	-
7.4.1.2(Ovality)	-	500	-
7.4 table -3 & 4(6.1 Dimensions)	-	500	-
7.2(Length)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	500	-
6.1.3 (PIPE DESCRIPTION)	-	500	-
6, 6.1.2(PIPE DESCRIPTION)	-	500	-
6, 6.1.1(PIPE DESCRIPTION)	-	500	-
6, 6.1(PIPE DESCRIPTION)	-	500	-
8.6(Overall migration)	-	500	-
8.3(Carbon black)	-	500	-
5.4(Anti oxydent)	-	500	-
5.3(e)(Carbon Black Master Batch)	-	500	-
5.3(d)(Carbon Black Master Batch)	-	500	-
5.3(c)(Carbon Black Master Batch)	-	500	-
5.3(b)(Carbon Black Master Batch)	-	500	-
5.3 (a)(Carbon Black Master Batch)	-	500	-
5.2(Polyethylene Resin)	-	500	-
5, 5.1 table-1(MATERIALS)	-	500	-
7()	-	500	-
5.2(Density)	-	500	-
5.2(MFI @ 1900C/5.0 Kg)	-	500	-
5.2(Volatile matter Content)	-	500	-
5.3(Toluene Extract)	-	500	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	500	-
Clause 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.6(Overall migration (stimulate))	-	500	-
Clause 8.6(Overall migration (surface of material))	-	500	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	500	-
Cl. 8.3(Carbon Black Content)	-	500	-
Cl. 8.3(Carbon Black Dispersion)	-	500	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	500	-
8.7(Density-IS 7328:2020)	-	500	-
8.7(Corrected Density- IS 7328:2020)	-	500	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	500	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	500	-
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-
8.10(Slow Crack Growth Rate)	-	500	-
7()	-	500	-
5.2(Density)	-	500	-
5.2(MFI @ 1900C/5.0 Kg)	-	500	-
5.2(Volatile matter Content)	-	500	-
5.3(Toluene Extract)	-	500	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	500	-
Clause 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.6(Overall migration (stimulate))	-	500	-
Clause 8.6(Overall migration (surface of material))	-	500	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	500	-
Cl. 8.3(Carbon Black Content)	-	500	-
Cl. 8.3(Carbon Black Dispersion)	-	500	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	500	-
8.7(Density-IS 7328:2020)	-	500	-
8.7(Corrected Density- IS 7328:2020)	-	500	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	500	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	500	-
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-

08 May, 2028

-
Included w.e.f 28.07.2025

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

ALL

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	500	-
5(CLASSIFICATION OF PIPES)	-	500	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	1000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	1000	-
11.2(Resistance to External Blows at 0°C)	-	1000	-
10.3(Effect on Water Test)	-	1000	-
6.1.2(PVC Resin)	-	1000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	1000	-
7.1.4(Length)	-	1000	-
6.1.1(VCM Content)	-	1000	-
7.2.1.2b(Maximum inner diameter of groove)	-	1000	-
13.1(Marking)	-	0	-
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	500	-
5(CLASSIFICATION OF PIPES)	-	500	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	500	-
11.2(Resistance to External Blows at 0°C)	-	500	-
10.3(Effect on Water Test)	-	500	-
6.1.2(PVC Resin)	-	500	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
7.1.4(Length)	-	500	-
6.1.1(VCM Content)	-	500	-
7.2.1.2b(Maximum inner diameter of groove)	-	500	-
13.1(Marking)	-	500	-
cL-13.1.1(Marking)	-	500	-
Cl-13.1.2(Marking)	-	500	-

08 May, 2028

-
Included w.e.f. 26.06.2025

IS 2080 (2021)

Specification for stabilized hydrogen peroxide First Revision

ALL

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description - IS 2080:2021)	-	400	-
4.2(Strength - IS 2080:2021)	-	500	-
4.3(Stability - IS 2080:2021)	-	500	-
4.4/Table 1 (i)(Acidity (as H2SO4) - IS 2080:2021)	-	500	-
4.4/Table 1 (ii)(Residue on Evaporation - IS 2080:2021)	-	500	-
4.4/Table 1 (iii)(Residue on Ignition - IS 2080:2021)	-	500	-
4.4/Table 1 (iv)(Iron (as Fe) - IS 2080:2021)	-	500	-
4.4/Table 1 (v)(Copper (as Cu) - IS 2080:2021)	-	500	-
4.4/Table 1 (vi)(Lead (as Pb) - IS 2080:2021)	-	500	-
4.4/Table 1 (vii)(Arsenic (as As2O3) - IS 2080:2021)	-	500	-
5.1(Packing)	-	0	-
5.2(Marking)	-	0	-
Annex C(Stability)	-	500	-
Cl-4.1(Description/as per cl 4.1)	-	500	-
cl-4.2(Strength/as per annex-A or annex C-9)	-	500	-
cl-4.4, table 1, sl.no. (i)(Acidity (as H2so4) / as per annex c (C-1))	-	500	-
cl-4.4, table 1, sl.no. (ii)(Residue on evaporation/ as per annex c (C-2))	-	500	-
cl-4.4, table 1, sl.no. (iii)(residue on ignition as per annex c (C-3))	-	500	-
cl-4.4, table 1, sl.no. (iv)(Iron as (fe)/ as per annex c (C-4 and C-8))	-	500	-
cl-4.4, table 1, sl.no. (v)(Copper as (Cu)/ as per annex c (C-5 and C-8))	-	500	-
cl-4.4, table 1, sl.no. (vi)(Lead as (Pb)/ as per annex c (C-6 and C-8))	-	500	-
cl-4.4, table 1, sl.no. (vii)(Arsenic as (As203)/ as per annex c (C-7 and C-8))	-	0	-
4.1(Description - IS 2080:2021)	-	0	-
4.2(Strength - IS 2080:2021)	-	0	-
4.3(Stability - IS 2080:2021)	-	0	-
4.4/Table 1 (i)(Acidity (as H2SO4) - IS 2080:2021)	-	0	-
4.4/Table 1 (ii)(Residue on Evaporation - IS 2080:2021)	-	0	-
4.4/Table 1 (iii)(Residue on Ignition - IS 2080:2021)	-	0	-
4.4/Table 1 (iv)(Iron (as Fe) - IS 2080:2021)	-	0	-
4.4/Table 1 (v)(Copper (as Cu) - IS 2080:2021)	-	0	-
4.4/Table 1 (vi)(Lead (as Pb) - IS 2080:2021)	-	0	-
4.4/Table 1 (vii)(Arsenic (as As2O3) - IS 2080:2021)	-	0	-
5.1(Packing)	-	0	-
5.2(Marking)	-	0	-
Annex C(Stability)	-	0	-
Cl-4.1(Description/as per cl 4.1)	-	0	-
cl-4.2(Strength/as per annex-A or annex C-9)	-	0	-
cl-4.4, table 1, sl.no. (i)(Acidity (as H2so4) / as per annex c (C-1))	-	0	-
cl-4.4, table 1, sl.no. (ii)(Residue on evaporation/ as per annex c (C-2))	-	0	-
cl-4.4, table 1, sl.no. (iii)(residue on ignition as per annex c (C-3))	-	0	-
cl-4.4, table 1, sl.no. (iv)(Iron as (fe)/ as per annex c (C-4 and C-8))	-	0	-
cl-4.4, table 1, sl.no. (v)(Copper as (Cu)/ as per annex c (C-5 and C-8))	-	0	-
cl-4.4, table 1, sl.no. (vi)(Lead as (Pb)/ as per annex c (C-6 and C-8))	-	0	-
cl-4.4, table 1, sl.no. (vii)(Arsenic as (As203)/ as per annex c (C-7 and C-8))	-	0	-

08 May, 2028

-
Included w.e.f 04.09.2025

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

245000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	245000	5% Discount for BIS
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	245000	5% Discount for BIS
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	245000	5% Discount for BIS
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	245000	5% Discount for BIS
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	245000	5% Discount for BIS
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	245000	5% Discount for BIS
14(Ice-Making Test (If Applicable))	-	245000	5% Discount for BIS
15(Test For Absence Of Odour And Taste)	-	245000	5% Discount for BIS
16(Safety Requirements)	-	245000	5% Discount for BIS

08 May, 2028

-
Included w.e.f.06.08.2025

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

212200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	Extra EMI/EMC charges: 1,80,000
8.1,a(Marking )	-	32200	Extra EMI/EMC charges: 1,80,000
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.2(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.3(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.4(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.5(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.6(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.7(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.7(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.8(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
11.1(Starting)	-	32200	Extra EMI/EMC charges: 1,80,000
11.2(Starting)	-	32200	Extra EMI/EMC charges: 1,80,000
12(Interchangeability)	-	32200	Extra EMI/EMC charges: 1,80,000
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	32200	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	180000	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	32200	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	-

08 May, 2028

-
Included w.e.f.19.06.2025

IS 17861 (2022)

TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision

ALL

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Design)	-	2000	-
Clause-5.2(Size and Fitting)	-	2000	-
Clause-5.3(Height of Upper)	-	2000	-
Clause-5.4(Weight)	-	2000	-
Clause-5.5.1(Construction)	-	2000	-
Clause-5.5.2(Upper – Outsole Bond Strength)	-	2000	-
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	2000	-
Clause-5.5.4(Ergonomic Features)	-	2000	-
Clause-5.5.5(Slip Resistance)	-	2000	-
Clause-5.5.6(Energy Absorption of Seat Region)	-	2000	-
Clause-5.5.7(Water Resistance)	-	2000	-
Clause-5.6.1(Penetration Resistance)	-	2000	-
Clause-5.6.2(Electrical Resistance (Antistatic))	-	2000	-
Clause-5.6.3(Heat Insulation of Sole Complex)	-	2000	-
Clause-5.6.4(Cold Insulation of Sole Complex)	-	2000	-
Clause-5.7.1(Material)	-	2000	-
Clause-5.7.2(Tear Strength)	-	2000	-
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	2000	-
Clause-5.7.4(Colour Fastness: Light)	-	2000	-
Clause-5.7.4(Colour Fastness:Washing)	-	2000	-
Clause-5.8.2(Tear Strength)	-	2000	-
Clause-5.8.3(Abrasion Resistance)	-	2000	-
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	2000	-
Clause-5.9.1(Tear Strength)	-	2000	-
Clause-5.10.1(Binding Tape)	-	2000	-
Clause-5.11.1(Closing Thread)	-	2000	-
Clause-5.12.1(Material and Thickness)	-	2000	-
Clause-5.12.2(Abrasion Resistance)	-	2000	-
Clause-5.12.3(Water Absorption and Desorption)	-	2000	-
Clause-5.13.1(Material and Thickness)	-	2000	-
Clause-5.13.2(Abrasion Resistance)	-	2000	-
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	2000	-
Clause-5.15(Toe Puff and Counter Stiffener)	-	2000	-
Clause-5.16.1(Material)	-	2000	-
Clause-5.16.2(Thickness)	-	2000	-
Clause-5.16.3(Sole Density)	-	2000	-
Clause-5.16.4(Hardness)	-	2000	-
Clause-5.16.5(Ageing)	-	2000	-
Clause-5.16.6(Tear Strength)	-	2000	-
Clause-5.16.7(Abrasion Resistance)	-	2000	-
Clause-5.16.8(Flexing Resistance)	-	2000	-
Clause-5.16.9(Hydrolysis)	-	2000	-
Clause-5.16.10(Interlayer Bond Strength)	-	2000	-
Clause-5.17(Eyelets)	-	2000	-
Clause-5.18.1(Material)	-	2000	-
Clause-5.18.2(Colour Fastness (Light, Washing))	-	2000	-
Clause-5.18.3(Breaking Load and Tag Retention)	-	2000	-
Clause-5.18.4.1(Lace to lace)	-	2000	-
Clause-5.18.4.2(Lace to eyelet)	-	2000	-
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	2000	-
Clause-7(Marking)	-	2000	-
Cl-5.10.2(Colour fastness to light)	-	2000	-
Cl-5.10.2(Colour fastness to washing)	-	2000	-
Cl-5.11.2(Colour fastness to washing)	-	2000	-
Cl-5.11.2(Colour fastness to light)	-	2000	-
Cl-5.11.2(Colour fastness to perspiration)	-	2000	-
Cl 5.9(Outer Toe Cap (minimum thickness))	-	2000	-
Cl- 6, Table No 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl-6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	2000	-
Cl-6, Table no-1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl-6, Table no-1 of IS 17011 (vii)(Formaldehyde)	-	2000	-
Cl-6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	2000	-
Cl-6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	2000	-
Cl-6, Table no 1 of IS 17011 (x)(pH)	-	2000	-
Cl-6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	2000	-
Cl-6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
Cl-5.7.5 (Amendment No-1)(Water Repellency)	-	2000	-
Cl-5.7.5 (Amendment No-1)(Water Resistance)	-	2000	-
Cl-5.9.2 (Amendment No-1)(Abrasion Resistance Test)	-	2000	-

08 May, 2028

-
Included w.e.f.18.07.2025

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.16(Creepage Distances and Clearances)	-	15000	5% discount for BIS
10.14(Cord Grip Test)	-	15000	5% discount for BIS
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	15000	5% discount for BIS
10.12(Moisture Resistance Test)	-	15000	5% discount for BIS
10.11(Protection against Electric Shock)	-	15000	5% discount for BIS
10.1(Earthing Connection)	-	15000	5% discount for BIS
10.9(Fan Speed and Input)	-	15000	5% discount for BIS
10.8(Construction)	-	15000	5% discount for BIS
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	15000	5% discount for BIS
10.6(High Voltage Test)	-	15000	5% discount for BIS
10.5(Leakage Current)	-	15000	5% discount for BIS
10.4(Temperature-Rise Test)	-	15000	5% discount for BIS
10.3(Air Delivery Test)	-	15000	5% discount for BIS
9.0(Marking)	-	15000	5% discount for BIS
7.11(Oscillating Mechanism)	-	15000	5% discount for BIS
7.9(Interchangeability)	-	15000	5% discount for BIS
7.8(Speed Regulators)	-	15000	5% discount for BIS
6.0(Design and General Construction)	-	15000	5% discount for BIS
5.0(Rated Frequency)	-	15000	5% discount for BIS
4.0(Rated Voltages)	-	15000	5% discount for BIS
3.0(Size, Speed and Types)	-	15000	5% discount for BIS
7.1(Protection Against Electric Shock)	-	15000	5% discount for BIS
7.2(Electrical Insulation Under Normal Operating Conditions)	-	15000	5% discount for BIS
7.3(Temperature-rise)	-	15000	5% discount for BIS
7.5(Creepage Distances and Clearances)	-	15000	5% discount for BIS
7.6(Finish)	-	15000	5% discount for BIS
7.7(Insulating Materials)	-	15000	5% discount for BIS
7.10(Oscillating Mechanism)	-	15000	5% discount for BIS
8.1, 8.2(Air delivery and service value)	-	15000	5% discount for BIS
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	15000	-
7.1(Protection Against Electric Shock)	-	15000	-
7.2(Electrical Insulation Under Normal Operating Conditions)	-	15000	-
7.3(Temperature-rise)	-	15000	-
7.5(Creepage Distances and Clearances)	-	15000	-
7.6(Finish)	-	15000	-
7.7(Insulating Materials)	-	15000	-
7.10(Oscillating Mechanism)	-	15000	-
8.1, 8.2(Air delivery and service value)	-	15000	-

08 May, 2028

-
Included w.e.f.19.06.2025

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

ALL

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	-
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	2000	-
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	2000	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	2000	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	2000	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	2000	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	-
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	2000	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	2000	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	-
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	-
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	2000	-
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	2000	-
4.1(General)	-	2000	-

08 May, 2028

-
Included w.e.f 17.06.2025

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-

08 May, 2028

-
Included w.e.f 04.06.2025

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	5000	-
4.1(Sample preparation as per clause 8 of IS 9873 Part 3:1999)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-i(Sb)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-ii(As)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-iii(Ba)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-iv(Cd)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-v(Cr)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-vi(Pb)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-vii(Hg)	-	5000	-
Cl-4.1 & 4.2,Table 1,sl.no-viii(Se)	-	5000	-

08 May, 2028

-
Included w.e.f 04.06.2025

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

105000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	25000	Extra EMI/EMC charges: 1,80,000
7.0(Marking and instructions)	-	25000	Extra EMI/EMC charges: 1,80,000
8.0(Protection against access to live part test)	-	25000	Extra EMI/EMC charges: 1,80,000
10.0(Power Input and current test)	-	25000	Extra EMI/EMC charges: 1,80,000
11.0(Heating test)	-	25000	Extra EMI/EMC charges: 1,80,000
13.0(Leakage current and electric strength test)	-	25000	Extra EMI/EMC charges: 1,80,000
14.0(Transient voltages)	-	25000	Extra EMI/EMC charges: 1,80,000
15.0(Moisture Resistance)	-	25000	Extra EMI/EMC charges: 1,80,000
16.0(Leakage current and electric strength test)	-	25000	Extra EMI/EMC charges: 1,80,000
17.0(Overload protection of transformers test)	-	25000	Extra EMI/EMC charges: 1,80,000
19.0(Abnormal Operations)	-	25000	Extra EMI/EMC charges: 1,80,000
20.0(Stability and Mechanical Hazards)	-	25000	Extra EMI/EMC charges: 1,80,000
21.0(Mechanical Strength)	-	25000	Extra EMI/EMC charges: 1,80,000
22.0(Construction verification related tests)	-	25000	Extra EMI/EMC charges: 1,80,000
23.0(Internal wiring)	-	25000	Extra EMI/EMC charges: 1,80,000
24.0(Components)	-	25000	Extra EMI/EMC charges: 1,80,000
25.0(Supply connections and External Flexible Cords)	-	25000	Extra EMI/EMC charges: 1,80,000
26.0(Terminal for External Conductors)	-	25000	Extra EMI/EMC charges: 1,80,000
27.0(Provision for Earthing)	-	25000	Extra EMI/EMC charges: 1,80,000
28.0(Screws and connections)	-	25000	Extra EMI/EMC charges: 1,80,000
29.0(Clearances and Creepage distances and solid insulation)	-	25000	Extra EMI/EMC charges: 1,80,000
30.0(Resistance to heat and fire)	-	25000	Extra EMI/EMC charges: 1,80,000
31.0(Resistance to rusting)	-	25000	Extra EMI/EMC charges: 1,80,000
32.0(Radiation, Toxicity and Similar hazards)	-	25000	Extra EMI/EMC charges: 1,80,000
19.11.4.1(Electrostatic discharges)	-	180000	-
19.11.4.2(Radiated fields)	-	180000	-
19.11.4.3(Fast transient bursts)	-	180000	-
19.11.4.4(Surge immunity test)	-	180000	-
19.11.4.5(Immunity to conducted discharges)	-	180000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	180000	-
19.11.4.7(Harmonics)	-	180000	-
4(General Requirements)	-	25000	Extra EMI/EMC charges: 1,80,000
5(General condition for the tests)	-	25000	Extra EMI/EMC charges: 1,80,000
9.0(Starting of motor-operated appliances test)	-	0	-
18.0(Endurance test)	-	0	-

08 May, 2028

-
Included w.e.f 20.06.2025

IS 302 : Part 2 : Sec 7 (2010)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 7 domestic electric clothes washing machines (First Revision)

235000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	55000	Extra EMI/EMC charges: 1,80,000
31(Resistance to Rusting)	-	55000	Extra EMI/EMC charges: 1,80,000
30(Resistance to Heat & Fire)	-	55000	Extra EMI/EMC charges: 1,80,000
29(Clearances, Creepage Distances & Solid Insulation)	-	55000	Extra EMI/EMC charges: 1,80,000
28(Screws & Connections)	-	55000	Extra EMI/EMC charges: 1,80,000
27(Provision For Earthing)	-	55000	Extra EMI/EMC charges: 1,80,000
26(Terminals For External Conductors)	-	55000	Extra EMI/EMC charges: 1,80,000
25(Supply Connection & External Flexible Cords)	-	55000	Extra EMI/EMC charges: 1,80,000
24(Components)	-	55000	Extra EMI/EMC charges: 1,80,000
23(Internal wiring)	-	55000	Extra EMI/EMC charges: 1,80,000
22(Construction)	-	55000	Extra EMI/EMC charges: 1,80,000
21(Mechanical strength)	-	55000	Extra EMI/EMC charges: 1,80,000
20(Stability & Mechanical Hazards)	-	55000	Extra EMI/EMC charges: 1,80,000
19(Abnormal Operation)	-	55000	Extra EMI/EMC charges: 1,80,000
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	55000	Extra EMI/EMC charges: 1,80,000
16(Leakage Current and Electric Strength)	-	55000	Extra EMI/EMC charges: 1,80,000
15(Moisture Resistance)	-	55000	Extra EMI/EMC charges: 1,80,000
14(Transient Over Voltage)	-	55000	Extra EMI/EMC charges: 1,80,000
13(Leakage Current and Electric Strength at Operating Temperature)	-	55000	Extra EMI/EMC charges: 1,80,000
11(Temperature Rise/ Heating)	-	55000	Extra EMI/EMC charges: 1,80,000
10(Power Input & Current )	-	55000	Extra EMI/EMC charges: 1,80,000
8(Protection against access to live parts)	-	55000	Extra EMI/EMC charges: 1,80,000
7(Marking)	-	55000	Extra EMI/EMC charges: 1,80,000
6(Classification)	-	55000	Extra EMI/EMC charges: 1,80,000
19.11.4.1(Electrostatic discharges)	-	180000	-
19.11.4.2(Radiated fields)	-	180000	-
19.11.4.3(Fast transient bursts)	-	180000	-
19.11.4.4(Surge immunity test)	-	180000	-
19.11.4.5(Immunity to conducted discharges)	-	180000	-
19.11.4.6(Voltage dips and interruptions)	-	180000	-
19.11.4.7(Harmonics)	-	180000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	55000	Extra EMI/EMC charges: 1,80,000
4(GENERAL REQUIREMENTS)	-	55000	Extra EMI/EMC charges: 1,80,000
24.1.4(Endurance of lid or door interlocks)	-	55000	Extra EMI/EMC charges: 1,80,000
24.101(Thermal Cut-outs incorporated in compliance with Clause 19.4 shall no be self-resetting.)	-	55000	Extra EMI/EMC charges: 1,80,000
9(Starting of Motor operated appliances)	-	0	-
18(Endurance)	-	55000	Extra EMI/EMC charges: 1,80,000

08 May, 2028

-
Included w.e.f.19.06.2025

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

All

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	70000	-
5(General Safety Considerations)	-	70000	-
5.1(General)	-	70000	-
5.2(Insulation and Wiring)	-	70000	-
5.3(Venting)	-	70000	-
5.4(Temperature, Voltage and Current Management)	-	70000	-
5.5(Terminal Contacts)	-	70000	-
5.6(Assembly of Cells into batteries)	-	70000	-
5.7(Quality Plan)	-	70000	-
5.8(Battery Safety Components)	-	70000	-
6(Type Test and Sample Size)	-	70000	-
7(Specific requirements and tests)	-	70000	-
7.1(Charging procedure for test purposes)	-	70000	-
7.2(Intended Use)	-	70000	-
7.3(Reasonably foreseeable misuse)	-	70000	-
8(Information for safety)	-	70000	-
8.1(General)	-	70000	-
8.2(Small Cell and battery safety information)	-	70000	-
9(Marking)	-	70000	-
9.1(Cell Marking)	-	70000	-
9.2(Battery Marking)	-	70000	-
9.3(Caution for ingestion of small cells and batteries)	-	70000	-
9.4(Other information)	-	70000	-
10(Packaging)	-	70000	-

08 May, 2028

-
Included w.e.f 20.06.2025

IS 16046 : Part 1 (2018)

All

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	80000	-
5(General Safety Considerations)	-	80000	-
5.1(General)	-	80000	-
5.2(Insulation and Wiring)	-	80000	-
5.3(Venting)	-	80000	-
5.4(Temperature, Voltage and Current Management)	-	80000	-
5.5(Terminal Contacts)	-	80000	-
5.6(Assembly of Cells into batteries)	-	80000	-
5.7(Quality Plan)	-	80000	-
6(Tyoe Test amd Sample Size)	-	80000	-
7.1(Charging procedure for test purposes)	-	80000	-
7.2(Intended Use)	-	80000	-
7(Specific requirements and tests)	-	80000	-
7.3(Reasonably foreseeable misuse)	-	80000	-
8(Information for safety)	-	80000	-
8.1(General)	-	80000	-
8.2(Small Cell and battery safety information)	-	80000	-
9(Marking)	-	80000	-
9.1(Cell Marking)	-	80000	-
9.2(Battery Marking)	-	80000	-
9.3(Caution for ingestion of small cells and batteries)	-	80000	-
9.4(Other information)	-	80000	-
10(Packaging)	-	80000	-

08 May, 2028

-
Included w.e.f 20.06.2025

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

208300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	28300	Extra EMI/EMC charges: 1,80,000
31.0(Resistance To Rusting)	-	28300	Extra EMI/EMC charges: 1,80,000
30.0(Resistance To Heat and Fire)	-	28300	Extra EMI/EMC charges: 1,80,000
29.0(Creepage Distances and Clearances)	-	28300	Extra EMI/EMC charges: 1,80,000
28.0(Screws and Connections)	-	28300	Extra EMI/EMC charges: 1,80,000
27.0(Provision For Earthing)	-	28300	Extra EMI/EMC charges: 1,80,000
26.0(Terminals for external conductors)	-	28300	Extra EMI/EMC charges: 1,80,000
25.0(Supply Connection and External Flexible Cords)	-	28300	Extra EMI/EMC charges: 1,80,000
24.0(Components)	-	28300	Extra EMI/EMC charges: 1,80,000
23.0(Internal Wiring)	-	28300	Extra EMI/EMC charges: 1,80,000
22.0(Construction)	-	28300	Extra EMI/EMC charges: 1,80,000
21.0(Mechanical Strength)	-	28300	Extra EMI/EMC charges: 1,80,000
20.0(Stability and mechanical hazards)	-	28300	Extra EMI/EMC charges: 1,80,000
19.0(Abnormal Operation)	-	28300	Extra EMI/EMC charges: 1,80,000
17.0(Overload Protection of transformer and associated circuit)	-	28300	Extra EMI/EMC charges: 1,80,000
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	28300	Extra EMI/EMC charges: 1,80,000
15.0(Moisture resistance)	-	28300	Extra EMI/EMC charges: 1,80,000
14.0(Transient Overvoltage)	-	28300	Extra EMI/EMC charges: 1,80,000
13.0(Leakage Current and electric strength at operating temperature)	-	28300	Extra EMI/EMC charges: 1,80,000
11.0(Heating)	-	28300	Extra EMI/EMC charges: 1,80,000
10.0(Input and Current)	-	28300	Extra EMI/EMC charges: 1,80,000
8.0(Protection against access to live parts)	-	28300	Extra EMI/EMC charges: 1,80,000
7.0(Classification)	-	28300	Extra EMI/EMC charges: 1,80,000
6.0(Marking and Instructions)	-	28300	Extra EMI/EMC charges: 1,80,000
19.11.4.1(Electrostatic discharges)	-	208300	-
19.11.4.2(Radiated fields)	-	208300	-
19.11.4.3(Fast transient bursts)	-	208300	-
19.11.4.4(Surge immunity test)	-	208300	-
19.11.4.5(Immunity to conducted discharges)	-	208300	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	208300	-
19.11.4.7(Harmonics)	-	208300	-
4(GENERAL REQUIREMENT)	-	28300	Extra EMI/EMC charges: 1,80,000
5(GENERAL CONDITIONS FOR THE TESTS)	-	28300	Extra EMI/EMC charges: 1,80,000

08 May, 2028

-
Included w.e.f.19.06.2025

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	45000	Extra EMI/EMC charges: 1,80,000
7(Marking and instructions)	-	45000	Extra EMI/EMC charges: 1,80,000
8(Protection against live parts)	-	45000	Extra EMI/EMC charges: 1,80,000
10(POWER INPUT AND CURRENT)	-	45000	Extra EMI/EMC charges: 1,80,000
11(HEATING)	-	45000	Extra EMI/EMC charges: 1,80,000
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	45000	Extra EMI/EMC charges: 1,80,000
14(IMPULSE VOLTAGE TEST)	-	45000	Extra EMI/EMC charges: 1,80,000
15(HUMIDITY TREATMENT TEST)	-	45000	Extra EMI/EMC charges: 1,80,000
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	45000	Extra EMI/EMC charges: 1,80,000
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	45000	Extra EMI/EMC charges: 1,80,000
19(ABNORMAL OPERATION)	-	45000	Extra EMI/EMC charges: 1,80,000
20(STABILITY AND MECHANICAL HAZARDS)	-	45000	Extra EMI/EMC charges: 1,80,000
21(MECHANICAL STRENGTH)	-	45000	Extra EMI/EMC charges: 1,80,000
22(CONSTRUCTION)	-	45000	Extra EMI/EMC charges: 1,80,000
23(INTERNAL WIRING)	-	45000	Extra EMI/EMC charges: 1,80,000
24(COMPONENTS)	-	45000	Extra EMI/EMC charges: 1,80,000
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	45000	Extra EMI/EMC charges: 1,80,000
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	45000	Extra EMI/EMC charges: 1,80,000
27(PROVISION FOR EARTHING)	-	45000	Extra EMI/EMC charges: 1,80,000
28(SCREWS AND CONNECTIONS)	-	45000	Extra EMI/EMC charges: 1,80,000
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	45000	Extra EMI/EMC charges: 1,80,000
30(RESISTANCE TO HEAT AND FIRE)	-	45000	Extra EMI/EMC charges: 1,80,000
31(RESISTANCE TO RUSTING)	-	45000	Extra EMI/EMC charges: 1,80,000
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	45000	Extra EMI/EMC charges: 1,80,000
Cl-19.11.4.1(Electrostatic discharge)	-	180000	-
Cl-19.11.4.2(Radiated Fields)	-	180000	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	180000	-
Cl-19.11.4.3(Fast transient bursts)	-	180000	-
Cl-19.11.4.4(Surge Immunity test)	-	180000	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	180000	-
Cl-19.11.4.7(Harmonics)	-	180000	-
18(ENDURANCE)	-	45000	Extra EMI/EMC charges: 1,80,000
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
22.32(Oxygen bomb for rubber material)	-	45000	Extra EMI/EMC charges: 1,80,000
22.46(Software)	-	45000	Extra EMI/EMC charges: 1,80,000

08 May, 2028

-
Included w.e.f.19.06.2025

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	20000	-
5.2(Message Readability)	-	20000	-
6(Marking)	-	20000	-
"Cl.6.1 "(Marking)	-	20000	-
"Cl.6.2 "(BIS Certification Marking)	-	20000	-
4(Requirements)	-	20000	-
5(Tests)	-	20000	-
6(Marking)	-	20000	-

08 May, 2028

-
Included w.e.f.30.05.2025

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	50000	(Extra EMI/EMC charges: 1,80,000/-)
8.1.1(Protection against live parts in all positions)	-	50000	-
8.1.2(Protection against live parts in openings)	-	50000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	50000	-
8.1.4(Protection against live parts against protective impedance)	-	50000	-
10.1(Power input)	-	50000	-
10.2(Current input)	-	50000	-
11.1(General)	-	50000	-
11.2(General)	-	50000	-
11.3(Heating)	-	50000	-
13.1(General)	-	50000	-
13.2(Leakage current at operating temperature)	-	50000	-
13.3(Electric Strength at operating temperature)	-	50000	-
14(Transient Over Voltages)	-	50000	-
15.0(General)	-	50000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	50000	-
15.2(Spillage Test)	-	50000	-
15.3(Humidity Test)	-	50000	-
16.0(General)	-	50000	-
16.1(General)	-	50000	-
16.2(Leakage Current (after Clause 15))	-	50000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	50000	-
17(Over Load Protection of Transformers and associated circuits)	-	50000	-
19(Abnormal Operation)	-	230000	(Extra EMI/EMC charges: 1,80,000/-)
20(Stability test)	-	50000	-
21(Mechanical Strength Test)	-	50000	-
22(Construction verification related test)	-	50000	-
23(General)	-	50000	-
24(Components)	-	50000	-
25(Supply connection and external flexible cords)	-	50000	-
26(Terminals for external conductors)	-	50000	-
27(Provision for earthing)	-	50000	-
28(Screw test and connections)	-	50000	-
29(clearance, creepage distances and solid insulation)	-	50000	-
30.1(Ball pressure test)	-	50000	-
30.2(Glow Wire Test)	-	50000	-
30.2(Needle Flame Test)	-	50000	-
4(General requirement)	-	50000	-
16(Leakage current and electric strength)	-	50000	-
17(Overload protection of transformers and associated circuits)	-	50000	-
18(Endurance)	-	50000	-
8.1.5(Live parts of built-in appliances)	-	50000	-
11.4(Heating appliances)	-	50000	-
11.5(Motor-operated appliances)	-	50000	-
11.6(Combined appliances)	-	50000	-
11.7(Duration corresponding)	-	50000	-
11.8(Temperature rise)	-	50000	-
4(General Requirement)	-	50000	-
5(General conditions for tests)	-	50000	-
6(Classifications)	-	50000	-
9(Starting of motor operation test requirements and tests)	-	50000	-
31(Resistance to Rusting)	-	50000	-
32(Radiation Toxicity and Similar Hazards)	-	50000	-
19.11.4.1(Electrostatic discharges)	-	50000	-
19.11.4.2(Radiated fields)	-	50000	-
19.11.4.3(Fast transient bursts)	-	50000	-
19.11.4.4(Surge immunity test)	-	50000	-
19.11.4.5(Immunity to conducted discharges)	-	50000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	50000	-
19.11.4.7(Harmonics)	-	50000	-
18(Endurance Test requirements and tests)	-	50000	(Extra EMI/EMC charges: 1,80,000/-)

08 May, 2028

-
Included w.e.f.19.06.2025

IS 6587 (2023)

Textiles - Spun hemp yarn - Specification (second revision)

All

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Hemp Fibre)	-	5000	-
4.2(Yarn)	-	2000	-
4.3(Skein)	-	2000	-
5.1(Fibre Identification)	-	5000	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	1000	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	1000	-
Cl. 5.2 Table-1(Variety no.)	-	1000	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	3000	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	3000	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	4000	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	4000	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	4000	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	4000	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	4000	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	2000	-
Cl. 5.2 Table-1(Ash Content)	-	2000	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	3000	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-

08 May, 2028

-
Included w.e.f 17.06.2025

IS 18161 (2023)

Textiles Light weight jute sacking bags for packing 50 kg mustard seed niger seed and ragi Specification

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture)	-	1000	-
4.1.1(Manufacture)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
4.3(Safety Stitch)	-	1000	-
4.3(Safety Stitch)	-	1000	-
4.4(Hemming at the Mouth)	-	1000	-
4.4(Hemming at the Mouth)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.1 & 5.1, Table 1, i(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, i(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, i(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, iii(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, iv(Dimensions)	-	2000	-
4.1 & 5.1, Table 1, v(Average Breaking strength)	-	2000	-
4.1 & 5.1, Table 1, v(Average Breaking strength)	-	2000	-
4.1 & 5.1, Table 1, vi(Average Breaking strength)	-	1000	-
4.1 & 5.1, Table 1, vii(Moisture Regain, % IS 9113 (Cl.8.2))	-	2000	-
4.1 & 5.1, Table 1, viii(Oil comtent IS: 9113(Cl.8.8))	-	2000	-
4.1.1 & 5.1, Table 1, ii(Ends/dm)	-	2000	-
5.4.2.1, Table 3, i(Non-halogenated hydrocarbons)	-	5000	-
5.4.2.1, Table 3, ii(Pesticides (Sum parameter))	-	5000	-
5.4.2.1, Table 3, iii(pH of aqueous extract)	-	1000	-
5.4.2.1, Table 3, iv(Coupled amines from azo-dyes)	-	5000	-

08 May, 2028

-
-

IS 17788 (2021)

Medical Textiles Nonwoven Fabric for Wipes Specification

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Fibre identification)	-	10000	-
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	1000	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	1000	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	1000	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	1000	-
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	1000	-
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	1000	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	1000	-
Clause 6.1, Table 1, (vi)(pH)	-	1000	-

08 May, 2028

-
Included w.e.f 17.06.2025

Bureau of Indian Standards

The National Standards Body of India

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

198-199, MIE, Industrial Area, Phase-1, Bahadurgarh, Haryana, Bahadurgarh, Jhajjar, Haryana, 124507

9818233966 info@alphatesthouse.com

Scope List