BIS - LIMS (Laboratory Information Management System)

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 cipetptchyd@gmail.com

Scope List

Reset

74 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

Polyethylene/ Class 1 - 3 / Size - 12 -32mm

17725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	6900	25 % DISCOUNT FOR BIS
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	25 % DISCOUNT FOR BIS
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	25 % DISCOUNT FOR BIS
Cl-6.0(Visual Appearance)	-	500	25 % DISCOUNT FOR BIS
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	25 % DISCOUNT FOR BIS
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1000	25 % DISCOUNT FOR BIS
Cl-7.2(Reversion Test)	-	1200	25 % DISCOUNT FOR BIS
Cl-7.3(Tensile Test)	-	1300	25 % DISCOUNT FOR BIS
Cl-7.3.1(Test Piece)	-	500	25 % DISCOUNT FOR BIS
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	25 % DISCOUNT FOR BIS
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	25 % DISCOUNT FOR BIS
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	25 % DISCOUNT FOR BIS
6(Visual Appearance)	-	500	25 % DISCOUNT FOR BIS
7.1 & Table 2(Hydraulic Characteristics)	-	1000	25 % DISCOUNT FOR BIS
7.1 & Table 2(Hydraulic Characteristics)	-	3000	25 % DISCOUNT FOR BIS
7.2(Reversion Test)	-	1200	25 % DISCOUNT FOR BIS
7.3(Tensile Strength)	-	1300	25 % DISCOUNT FOR BIS
7.3(Elongation at Break)	-	1300	25 % DISCOUNT FOR BIS
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25 % DISCOUNT FOR BIS
4.2(a)(Carbon Black Content-IS 2530)	-	925	25 % DISCOUNT FOR BIS
4.2(b)(Carbon Black Dispersion-IS 2530)	-	925	25 % DISCOUNT FOR BIS
Cl-4.1(Material)	-	6900	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1000	-
Cl-7.2(Reversion Test)	-	700	-
Cl-7.3(Tensile Test)	-	1300	-
Cl-7.3.1(Test Piece)	-	500	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	3000	-
7.1 & Table 2(Hydraulic Characteristics)	-	1000	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Strength)	-	1300	-
7.3(Elongation at Break)	-	1300	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-
4.2(a)(Carbon Black Content-IS 2530)	-	925	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700	-

Complete

23 Feb, 2027

Included w.e.f. 20.11.2024

IS 10951 (2020)

Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion ( Second Revision )

Polypropylene ( PP ) Materials for Moulding and Extrus

20925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1100	-
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	1100	-
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	1100	-
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1100	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1100	-
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1100	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1100	-
Clause 6.3.2,Table-8, Sl no.1(Charpy impact strength, KJ/m2, IS 13360 (Part 5/Sec 5))	-	1100	-
Clause 6.3.2,Table-8, Sl no.1(Hardness – Rockwell R, Shore D,IS 13360 (Part 5/Sec 13),IS 13360 (Part 5/Sec 11))	-	675	-
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	600	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	1100	-
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	1100	-
Clause 6.3.2,Table-8, Sl no.2(Flammability, mm/min,IS/ IEC 60695-11-10)	-	2900	-
Clause 6.3.2,Table-8, Sl no.3(Volume resistivity,IS 2071 (Part 1))	-	1100	-
Clause 6.3.2,Table-8, Sl no.3(Surface resistivity,IS 2071 (Part 1))	-	1100	-
Clause 6.3.2,Table-8, Sl no.4(Water absorption,%,IS 13360 (Part 8/ Sec 1))	-	600	-
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	500	-
Clause 6.4.2(Pigments and colourants, IS 9833, Annex D.1)	-	300	-
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	1700	-
6.1(The material shall be uniform and free from foreign matter.)	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Ignitability (Oxygen index), percent,IS 13360 (Part 6/Sec 19))	-	1200	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

High density polyethylene (HDPE) polypropylene (PP) wo

18580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	250	-
5.2 Table 1(Dimensions)	-	250	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	250	-
5.2 Table 1(Ends per dm)	-	250	-
5.2 Table 1(Picks per dm)	-	250	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2200	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1100	-
5.2 Table 1(Drop impact strength)	-	1100	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	950	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

Polyethylene Mulch Films for Agriculture

17950.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	500	-
5.1.2(Melt Flow Index)	-	1100	-
5.1.4(Carbon black, Density)	-	925	-
5.1.4(Carbon black, Toluene extract)	-	925	-
5.1.4(Carbon black, Volatile matter)	-	925	-
5.1.4(Carbon black, particle size)	-	925	-
5.1.4(Carbon black, Tint strength)	-	925	-
5.2.1(Visual Appearance)	-	300	-
5.2.4(Odour)	-	250	-
5.3.1.1(Tolerance on thickness)	-	250	-
5.3.1.2(Tolerance on width)	-	250	-
5.3.2(Impact Strength)	-	1100	-
5.3.2, Table 1(Nominal Film Thickness)	-	250	-
5.3.2, Table 1(Impact Failure Mass)	-	1100	-
5.3.3(Tensile Strength at Break)	-	2200	-
5.3.4(Elongation at Break)	-	2200	-
5.3.5(Coefficient of Friction)	-	850	-
5.3.6(Elmendorf Tear Strength)	-	2200	-
5.3.7(Opacity)	-	575	-
5.4, Table 2(Carbon black, percent)	-	925	-
5.4, Table 2(Ash content, percent)	-	950	-
5.4, Table 2(Carbon black dispersion)	-	700	-
5.5(Service Life)	-	75860	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

HDPE laminated woven lay flat tube for irrigation

114531 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	875	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	1800	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	1800	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	1100	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	250	-
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	250	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	1100	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	1100	-
6. Table 2 i) IS 1964 (Mass)	-	250	-
6. Table 2 vii) Annex C (Puncture strength)	-	1100	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	1100	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	1100	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	1100	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	1100	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	500	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250	-
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	1200	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	1100	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	250	-
6.2(Workmanship)	-	300	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	1000	-
6.4 , 6.4.1(Proof Pressure Tes)	-	1000	-
6.6(Kink Test :)	-	1100	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	1100	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	1100	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 17358 : Part 1 (2020)

Agro textiles “ Fencing nets for agriculture and horticulture purposes “ Specification Part 1 Fencing nets made from extruded polymer mesh

Fencing nets made from extruded polymer mesh

17948 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, table 1,2,3(MATERIALS)	-	5700	-
5.2(Colour)	-	250	-
(ii)(Mesh Size, Traverse Direction)	-	250	-
(iii)(Mesh Size, Cross Direction)	-	250	-
(vi)(Length)	-	250	-
(vi)(Width)	-	250	-
(vii) a(Tensile Strength before UV exposure, Machine Direction)	-	1100	-
(ix) a(Tensile Strength after UV exposure, Machine Direction)	-	1100	-
(vii) b(Tensile Strength before UV exposure, Traverse Direction)	-	1100	-
(ix) b(Tensile Strength after UV exposure, Traverse Direction)	-	1100	-
(viii) a(Elongation before UV exposure, Machine Direction)	-	1100	-
(viii) b(Elongation before UV exposure, Traverse Direction)	-	1100	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

Shade nets made from mono filament yarns

17885 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Material)	-	1050	-
4.2(Fabric)	-	500	-
4.3(Colour)	-	300	-
5.0(Types)	-	1000	-
6.1(Dimensions and mass)	-	500	-
6.2 Table 1(Mass g/m2,Min)	-	250	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-	1100	-
6.2 Table 1(Warpway Weftway)	-	500	-
6.2 Table 1(Retention of breaking strength after UV exposure, N, Min)	-	1100	-
6.2 Table 1(Bursting pressure, kgf/cm2, Min)	-	1000	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

Shade nets made from tape yarns (first revision)

17885 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Types)	-	1000	-
6.1(Dimensions and Mass - IS 1954)	-	500	-
6.2 Table 1(Mass - IS 1964)	-	250	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	1100	-
6.2 Table 1(Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-	1100	-
6.2 Table 1(Colour fastness to artificial light, IS 2454)	-	850	-
6.2 Table 1(Bursting Pressure, IS 1966 (Part 1 or 2))	-	1000	-
4.3, 4(Colour)	-	300	-
4.2, 4(Fabric )	-	500	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 16513 (2016)

Agro textiles “ Insect nets for agriculture and horticulture purposes “ Specification

Agro textiles “ Insect nets Fabric

20873 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6/6.1( REQUIREMENTS Dimensions and Mass a) Length)	-	250	-
6/6.1( REQUIREMENTS Dimensions and Mass b) width)	-	250	-
6/6.1( REQUIREMENTS Dimensions and Mass c) Mass gm/m2)	-	250	-
4.2( Netting Fabric)	-	500	-
4/4.1(b) percent on avarage value; and( MATERIAL / HDPE Monofilament Yarn)	-	2000	-
5.0(types a) Type I — having mesh of 30; b) Type II — having mesh of 40; andc) c) Type III — having mesh of 50)	-	250	-
4.3( Colour)	-	300	-

Complete

23 Feb, 2027

Including w.e.f. 28.10.2024

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

Polyethylene Material for Moulding & Extrusion

5293.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	500	-
5.2.1.2(MFI)	-	1100	-
5.4.3 10 ofIS 2530(Carbon black content)	-	925	-
5.5.6 IS 2530(Carbon black dispersion)	-	700	-

Complete

23 Feb, 2027

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

up to 1200 mm

20975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1300	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
9.1(PIPE ENDS)	-	300	-
8(SEALING RINGS)	-	300	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	250	-
5(CLASSIFICATION OF PIPES)	-	250	-
10.7(Sulphated Ash Content)	-	950	-
10.3(Effect on Water Test)	-	0	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-

Complete

23 Feb, 2027

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

Oriented unplasticized polyvinyl chloride (Pvc - O) pip

53875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	500	-
6.0(CLASSIFICATION OF PIPES, table-2)	-	0	-
7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance)	-	300	-
7.2( Colour)	-	300	-
7.3( Opacity)	-	575	-
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	500	-
8.1.2, table 4 to 7(Wall Thickness)	-	500	-
8.1.3 (Length, meter)	-	500	-
8.2 table-9(Dimensions of Integral Socket)	-	500	-
8.2 table-9( Pipe Ends)	-	500	-
9.3 table-12( Ring Stiffness)	-	1100	-
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	13400	-
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	-
9.4, annexure-E( Orientation Factor)	-	1400	-
10, table-13( PHYSICAL AND 1CHARACTERISTICS)	-	3000	-
11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints)	-	1000	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	1000	-
11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-	11000	-

Complete

23 Feb, 2027

IS 14399 : Part 1 and 2 (1996)

Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (GRP) Sectional Water Storage Tanks : Part 1 palels, Part 2 Guidelines for assembly, installation and test

Hot Press Moulded Thermosetting Glass Fibre Reinforced

12375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Flange of Panels)	-	250	-
6.4(Type/Thickness of panel)	-	250	-
7.0(Visual inspection of the panels)	-	300	-
8, Table-1, Annex-B(Tensile Strength)	-	1100	-
8, Table-1, Annex-C(Bending strength)	-	1100	-
8, Table-1, Annex-D(Elastic moduius in Bend)	-	1100	-
8, Table-1, Annex-E(Glass Content)	-	950	-
8, Table-1, Annex-F(Barcoal Hardness)	-	375	-
8, Table-1, Annex-G(Water Absorption)	-	600	-

Complete

23 Feb, 2027

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

UPVC / PIPES & FITTINGS

45713 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1 Table 2(Mean outside diameter)	-	500	-
6.3.2 Table 3(Wall thickness)	-	500	-
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	500	-
6.3.4.1(Wall thickness of sockets)	-	500	-
6.3.4.4(Type of fittings)	-	300	-
7.1(Appearance)	-	300	-
7.2(Colour )	-	300	-
7.3(Vicat softening temperature of pipes)	-	1100	-
7.4(Resistance to Dichloromethane)	-	1000	-
7.5(longitudinal reversion)	-	700	-
8.1(Appearance and colour)	-	300	-
8.2(Vicat softening temperature of fittings)	-	1100	-
8.3(Effect of Heating (Stress Relief Test))	-	700	-
9.2(Resistance to external blows at o C)	-	1100	-
9.3(Ring flexibility)	-	1100	-
9.4(Creep ratio)	-	1100	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	850	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	2000	-

Complete

23 Feb, 2027

IS 14856 (2000)

Glass fibre reinforced plastic (GRP) panel type door shutters for internal use - Specification

11181 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1(CONSTRUCTION/ FABRICATION)	-	1000		-

Complete

23 Feb, 2027

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

11950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	1050	-
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	300	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	900	-
3.7(Confluence Line Strength)	-	1500	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	2200	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1100	-
3.10.1(Suspension Test)	-	1100	-
3.10.2(Free-Fall Test)	-	1100	-

Complete

23 Feb, 2027

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs.Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
Rs.1744/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
Rs.1819/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
Rs.1744/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs.Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs.Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labsM/s Choksi Labs, Indore. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

8287.5 View breakup
Rs.7838/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	1050	25% Discount on Test Charges for BIS
2.3(Shape and Dimensions)	-	500	25% Discount on Test Charges for BIS
2.4(Mass )	-	300	25% Discount on Test Charges for BIS
2.6(Colour Fastness)	-	2200	25% Discount on Test Charges for BIS
2.7(Resistance to Stress)	-	1000	25% Discount on Test Charges for BIS
2.8(Resistance to Applied Load)	-	1000	25% Discount on Test Charges for BIS
2.9(Strength)	-	3100	25% Discount on Test Charges (Rs. 1900) for BIS No discount on conditioning charges of Rs. 1200/-
2.1(Dimensional Stability)	-	900	25% Discount on Test Charges for BIS

Complete

23 Feb, 2027

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

- View breakup
Rs.4219/--

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

- View breakup
Rs.4219

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 cipetptchyd@gmail.com

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found