BIS - LIMS (Laboratory Information Management System)

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 cipetptchyd@gmail.com

Scope List

Reset

79 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

upto 315mm

13550 View breakup
Rs.12400/-(Type A Natural Weathering) Rs 34200 /- (Type A Weatherometer Xenon Arc * Optional) ) Rs.12725/-(Type B Natural Weathering) Rs 34525 /- (Type B Weatherometer Xenon Arc * Optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

upto 25 mm

12194 View breakup
Rs.9056/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1050	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.2(Fittings)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3(General)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.1(Wall Thickness ofEmitting Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.2(Inside Diameter ofEmitting Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.3(Flow Paths in Emitting Unit)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.4(Spacing ofEmitter Units)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5(Resistance to Tension at Elevated Temperature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5(Resistance to Tension at Elevated Temperature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.8(Determination of Emitting Unit Exponent)	-	600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1125	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

3525 View breakup
Rs.3525/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
7.2(Flow path in emitters)	-	300	25% DISCOUNT FOR BIS
7.3.1(Resistance to Hydrostatic pressure)	-	1000	25% DISCOUNT FOR BIS
7.3.2(Resistance to Hydrostatic pressure)	-	1000	25% DISCOUNT FOR BIS
7.3.3(Resistance to Hydrostatic pressure)	-	1000	25% DISCOUNT FOR BIS
7.4.1(Emitter Pull Out In-line emitters)	-	500	25% DISCOUNT FOR BIS
7.4.2(Emitter Pull Out On-line emitters)	-	500	25% DISCOUNT FOR BIS
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.3(Determination of Emitter Exponent)	-	600	25% DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

17456 View breakup
Rs.17456/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 6(Manufacture)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 7(Finish)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 8(Dimensions & Tolerances)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.2(Test For Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.3(Test For Moisture Content)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.4(For Water AbsorptionTest )	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.5(For Swelling in water Test )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	6500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.9(Test For Screw Withdrawal Strength)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	875	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.12 & Annex E( Test For Crack Resistance)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

upto 4000 mm

11369 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(COLOUR)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3.1(No.of Ribs)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3.2(Rib height)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4(Sealing rings - Hardness)	-	375	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2(Internal Diameter)	-	350	25% DISCOUNT ON TEST CHARGES FOR BIS
9.3(Density IS 12235 (Part 14))	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
9.5(Tensile Strength IS 12235(Part 13))	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

upto 32 mm

7431 View breakup
Rs.7431/- Raw Material – Rs 5181 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	25% DISCOUNT FOR BIS
4.1.c.ii (Toluene extract - Annex A)	-	1100	25% DISCOUNT FOR BIS
4.1.c.iii (Volatile matter - Annex B )	-	700	25% DISCOUNT FOR BIS
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	25% DISCOUNT FOR BIS
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25% DISCOUNT FOR BIS
7.3(Tensile Test)	-	1100	25% DISCOUNT FOR BIS
7.3(Elongation at Break)	-	1100	25% DISCOUNT FOR BIS
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25% DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 12785 (1994)

Irrigation equipment - Strainer - Type filters - Specification (first revision)

8438 View breakup
Rs.8438/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.4(General)	-	500	25% DISCOUNT FOR BIS
4.2.1(Strainer Housing)	-	500	25% DISCOUNT FOR BIS
4.3.1(Connections IS 2643 : 1975.)	-	500	25% DISCOUNT FOR BIS
6.1(MECHANiCAL TESTS)	-	1500	25% DISCOUNT FOR BIS
6.2(MECHANiCAL TESTS )	-	3750	25% DISCOUNT FOR BIS
6.3(MECHANiCAL TESTS )	-	1000	25% DISCOUNT FOR BIS
6.4(MECHANiCAL TESTS )	-	1000	25% DISCOUNT FOR BIS
6.5(MECHANiCAL TESTS )	-	2500	25% DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

upto 20000 lit

13850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2.3(Carbon Dispersion Test)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
5(Types and Features )	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Finish)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1(Resistance to Deformation)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2(Resistance to Deformation)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Resistance to Impact)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Test for Top Load Resistance)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4(Tensile Strength)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(Flexural Modulus)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
7.6(overall Migration)	-	2300	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 12232 : Part 1 (1996)

Irrigation equipment - Rotating sprinkler: Part 1 design and operational requirements (First Revision)

15900 View breakup
Rs.15900/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	1350	25% DISCOUNT FOR BIS
4.1(Materials)	-	1350	25% DISCOUNT FOR BIS
4.2.1(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
4.2.2(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
4.2.3(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
4.3(Threaded connections ISO 7-1.)	-	400	25% DISCOUNT FOR BIS
4.4.1(Effective pressures)	-	400	25% DISCOUNT FOR BIS
4.4.2(Actuating mechanism)	-	400	25% DISCOUNT FOR BIS
6.1(Test of construction and parts)	-	300	25% DISCOUNT FOR BIS
6.2.1(Threaded connections to riser)	-	400	25% DISCOUNT FOR BIS
6.2.2(Nozzle threads intended for threaded connection)	-	400	25% DISCOUNT FOR BIS
6.3(Test of resistance to hydrostatic pressure at ambient temperature)	-	850	25% DISCOUNT FOR BIS
6.4(Test of resistance to hydrostatic pressure at high temperature)	-	1600	25% DISCOUNT FOR BIS
6.5.1 a(Watertightness of sprinkler - flowrate < 250 Iih)	-	400	25% DISCOUNT FOR BIS
6.5.1 b(Watertightness of sprinkler - flowrate ≥ 250 I/h,)	-	400	25% DISCOUNT FOR BIS
6.5.2(Watertightness of nozzle connection)	-	400	25% DISCOUNT FOR BIS
7.1(Test of uniformity of rotation speed)	-	400	25% DISCOUNT FOR BIS
7.2(Test of uniformity of ftowrate )	-	400	25% DISCOUNT FOR BIS
7.3(Test of distribution characteristics)	-	1900	25% DISCOUNT FOR BIS
7.4(Test of effective diameter of coverage)	-	400	25% DISCOUNT FOR BIS
7.5(Test of trajectory height (for sprinklers with low trajectory angle))	-	400	25% DISCOUNT FOR BIS
7.6(Test of range of effective pressure)	-	400	25% DISCOUNT FOR BIS
8.1 and 6.1(Durability tests)	-	6550	25% DISCOUNT FOR BIS
8.2 and 6.3(Durability tests)	-	850	25% DISCOUNT FOR BIS
8.3 and 6.5.1(Durability tests)	-	400	25% DISCOUNT FOR BIS
8.4(Durability tests)	-	400	25% DISCOUNT FOR BIS
8.5(Durability tests)	-	400	25% DISCOUNT FOR BIS
8.6(Durability tests)	-	1500	25% DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

upto 630 mm

1500 View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1, Table-1, Fig-1(Nominal size)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2.1, Table-1, Fig-1(B)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 3.2.2, and Fig. 2(Nominal size)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 3.2.2, and Fig. 2.(B)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

upto 630mm

4519 View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Size of fitting)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table-1 Fig.1(Dimension of Socket length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3(Material)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

UP TO 63MM

7425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1 Table-2(Length of Socket end)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2(Maximum and minimum outside diameter of conduit)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Minimum inside diameter of conduit)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Length of conduit)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4(Unifomity of The wall Thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
10(Resistance to Heat -Ball presure test)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

upto 315mm

4219 View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

upto 315mm

4219 View breakup
Rs.3,675/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2(Opacity- Appendix B)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

upto 1200 mm

20975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2.1(DIMENSIONS-Socket)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5(CLASSIFICATION OF PIPES)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 10.7(Sulphated Ash Content)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS
11.2(Resistance to External Blows at 0°C)	-	1300	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
5(CLASSIFICATION OF PIPES)	-	0	-
10.7(Sulphated Ash Content)	-	950	-
10.1(Colour)	-	0	-
10.3(Effect on Water Test)	-	3000	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
10.1(Colour)	-	0	-
10.3(Effect on Water)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
D-2.1.2.4(Effect on Water Test)	-	0	-

Complete

23 Feb, 2027

-
-

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

17238 View breakup
Rs.17238/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(DIMENSIONS AND TOLERANCES-Liaear Dimension-Sheets or Rolls)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2(DIMENSIONS AND TOLERANCES-Liaear Dimension-Tiles)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	200	25% DISCOUNT ON TEST CHARGES FOR BIS
6. 1(COLOUR AND SURFACE CHARACTERISTICS)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(i)(REQUlREMENTS-Thickness Variation )	-	200	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(ii)(REQUlREMENTS-Width of sheet or roll )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(iii)(REQUlREMENTS-rile size )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(iv)(REQUlREMENTS-Squareness )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(iv)(REQUlREMENTS-Dimensional stability )	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(v)(REQUlREMENTS-Colour fastness to daylight )	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(vi)(REQUlREMENTS-Curling )	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(vii)(REQUlREMENTS-Residual indenration )	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(viii)(REQUlREMENTS-Flexibility )	-	1500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(ix)(REQUlREMENTS-Resistance to various substances-Scratch width )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(x)(REQUlREMENTS-Resistance to various substances )	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xi)(REQUlREMENTS-Ply adhesion )	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xii)(REQUlREMENTS-Moisture movernent )	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xiii)(REQUlREMENTS-Heat ageing and exudation )	-	10100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xiii)(REQUlREMENTS-Elastic product)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

14938 View breakup
For Others: • Rs.4600/- • Rs.12700/- for Type-I • Rs.10250/- for Type-II • Rs.12600/- for Type-III • Rs.12600/- for Type-IV • Rs.6600/- for Natural compound • Rs.5825/- for Natural granules (PE Resin) • Rs.1875/- for Carbon black master batch • Rs.5100/- for Carbon black master batch For BIS: • Rs.3450/- • Rs.10775/- for Type-I • Rs.8875/- for Type-II • Rs.9575/- for Type-III • Rs.9575/- for Type-IV • Rs.4950/- for Natural compound • Rs.4525/- for Natural granules (PE Resin) • Rs.1406/- for Carbon black master batch • Rs.3825/- for Carbon black master batch

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2(Film Form)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.3(Odour)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6a(Carbon Black Content, Annex-A)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6b(Ash Content, Annex-A)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Tolerance on Thickness, Annex-A)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tear resistance , Annex B)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Puncture resistance , Annex C)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tear resistance , Annex B)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Puncture resistance , Annex C)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
For black films only. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

37800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	6000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.9 table-6(Elongation at Break)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.8(Tensile Strength for Butt-fusion)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5 (Oxidation Induction Time)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4( Melt Flow Rate)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2(Longitudinal Reversion Test)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4.1.2(Ovality)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 table -3 & 4(6.1 Dimensions)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.1(6.1.1 Identification Stripes)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Colour)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6, 6.1(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6, 6.1.1(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3 (PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6, 6.1.2(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
8.6(Overall migration)	-	2000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3(Carbon black)	-	1625	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3(c)(Carbon Black Master Batch)	-	1406	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3(e)(Carbon Black Master Batch)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2(Polyethylene Resin)	-	4525	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

20050 View breakup
Rs.19675/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.1(MOISTURE CONTENT)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.2(Water resistance test)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.4(Tensile strength)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.5(Mycological test)	-	3200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.6 (Table 3)(Static bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.7 (Table 4)(Wet bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.8(Retention of preservative)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

Bureau of Indian Standards

The National Standards Body of India

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 cipetptchyd@gmail.com

Scope List