BIS - LIMS (Laboratory Information Management System)

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 cipetptchyd@gmail.com

Scope List

Reset

79 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

8287.5 View breakup
Rs.7838/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	1050	25% Discount on Test Charges for BIS
2.3(Shape and Dimensions)	-	500	25% Discount on Test Charges for BIS
2.4(Mass )	-	300	25% Discount on Test Charges for BIS
2.6(Colour Fastness)	-	2200	25% Discount on Test Charges for BIS
2.7(Resistance to Stress)	-	1000	25% Discount on Test Charges for BIS
2.8(Resistance to Applied Load)	-	1000	25% Discount on Test Charges for BIS
2.9(Strength)	-	3100	25% Discount on Test Charges (Rs. 1900) for BIS No discount on conditioning charges of Rs. 1200/-
2.1(Dimensional Stability)	-	900	25% Discount on Test Charges for BIS

Complete

23 Feb, 2027

-
-

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

- View breakup
Rs.4219/--

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

- View breakup
Rs.4219

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 10840 (1994)

Blow moulded hdpe containers for packing of vanaspati - Specification (Second Revision)

- View breakup
Rs.4725/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
-

IS 12709 (1994)

Glass - Fibre reinforced plastic (Grp) pipes joints and fittings for use for potable water supply - Specification (First Revision)

- View breakup
Rs.44000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
-

IS 14482 (1997)

Irrigation equipment - Polyethylene micro tubes for drip irrigation - Specification

- View breakup
Rs.4725/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

17155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	25% discount on test charges for BIS
4.1(Raw Material)	-	1050	25% discount on test charges for BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% discount on test charges for BIS
4.2(Tapes – Linear Density )	-	500	25% discount on test charges for BIS
4.2(Construction)	-	300	25% discount on test charges for BIS
4.3(Sacks)	-	300	25% discount on test charges for BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	25% discount on test charges for BIS
4.3.1(Bottom Seam)	-	300	25% discount on test charges for BIS
4.3.1( The outer stitch)	-	300	25% discount on test charges for BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	25% discount on test charges for BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	25% discount on test charges for BIS
4.3.1(The number of stitches/dm)	-	300	25% discount on test charges for BIS
4.3.2(Mouth)	-	300	25% discount on test charges for BIS
4.4 and Table 1 i(Capacity)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% discount on test charges for BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% discount on test charges for BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% discount on test charges for BIS
5.1 and Table 1 v(Mass of sack )	-	250	25% discount on test charges for BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	25% discount on test charges for BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 x(Ash content )	-	950	25% discount on test charges for BIS

Complete

23 Feb, 2027

-
-

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

36293 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1(MANUFACTURE- IS 15907)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(The width of the hem - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	2000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Finished width of pocket - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.4(Bonding- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (i)(Mass)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	8020	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	6920	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Length -IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Width - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Height - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Water Proofness,IS 7941)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Water Proofness, IS 7940)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

199569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	4375	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(HDPE Fabric)	-	2250	25% DISCOUNT ON TEST CHARGES FOR BIS
5(MANUFACTURE)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1(Lamination)	-	4125	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2(Panel Width)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3(Joints/Seams)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Mass, g/sq m)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Width)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	2600	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	178100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	2600	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

17268 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	25% discount on test charges for BIS
4.1(Raw Material)	-	1050	25% discount on test charges for BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% discount on test charges for BIS
4.2(Tapes – Linear Density )	-	500	25% discount on test charges for BIS
4.2(Construction)	-	300	25% discount on test charges for BIS
4.3(Sacks)	-	300	25% discount on test charges for BIS
4.3.1(Bottom Seam)	-	250	25% discount on test charges for BIS
4.3.1(The two rows of stitches shall be separated from each other)	-	250	25% discount on test charges for BIS
4.3.1( The outer stitch)	-	250	25% discount on test charges for BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	250	25% discount on test charges for BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	25% discount on test charges for BIS
4.3.1(stitches/dm)	-	250	25% discount on test charges for BIS
4.3.2(Mouth)	-	250	25% discount on test charges for BIS
4.4(Mass of the loose liner )	-	250	25% discount on test charges for BIS
4.4(Width of the loose liner)	-	250	25% discount on test charges for BIS
4.4(Length of the line)	-	250	25% discount on test charges for BIS
4.4(Bottom seam of the loose liner)	-	250	25% discount on test charges for BIS
4.4.1(Liner)	-	250	25% discount on test charges for BIS
4.5 and Table 1 i(Capacity)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% discount on test charges for BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% discount on test charges for BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% discount on test charges for BIS
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	25% discount on test charges for BIS
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	25% discount on test charges for BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	25% discount on test charges for BIS
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 x(Ash content )	-	950	25% discount on test charges for BIS

Complete

23 Feb, 2027

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

21693 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Unlaminated Fabric Mass )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.3.1(Bottom seam (IS 10789))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 ii(Dimensions )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 v(Mass of sack )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 viii(Elongation at break of fabric )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 x(Ash content )	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 14743 (1999)

Irrigation equipment - Hydrocyclone filters - Specification

7312.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(TECHNICAL REQUIREMENTS - Material)	-	500	25 % DISCOUNT FOR BIS
4.2.1(Construction)	-	250	25 % DISCOUNT FOR BIS
4.2.2(Construction)	-	250	25 % DISCOUNT FOR BIS
4.3.1(Cyclonic Vessel)	-	500	25 % DISCOUNT FOR BIS
4.4.1(Connections IS 554.)	-	500	25 % DISCOUNT FOR BIS
5.1(Resistance to Internal Hydrostatk Pressure)	-	1500	25 % DISCOUNT FOR BIS
5.2(Resistance to Internal Hydrostatk Pressure at Elevated Temperatures)	-	3750	25 % DISCOUNT FOR BIS
5.3(Pressure Drop vs Flow)	-	2500	25 % DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
-

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

2062.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(General Requirements)	-	300	25% DISCOUNT FOR BIS
Cl 6 & Table 1,2 or 3(Reference Number.)	-	250	25% DISCOUNT FOR BIS
Cl 6 & Table 1,2 or 3(Linear Density)	-	1100	25% DISCOUNT FOR BIS
Cl 6 & Table 1,2 or 3(Breaking Force)	-	1100	25% DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
-

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

upto 200mm

107513 View breakup
Rs.107513/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 7(Dimensions Of Pipes)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 8(Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.1(Hydraulic Characteristics)	-	18400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.2(Fusion Compatibility)	-	4800	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.3(Reversion Test )	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.4 & Annex B(Impact Strength)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.5(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.6(Melt Flow Rate)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	1625	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.9(Opacity)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

upto 150mm

146569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.1 Annex B(Chloride Content of Resin)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.1 Annex B(Chloride content)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1125	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.3 (Effective length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8(Pipe Ends)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2 IS 12235 (Part 3)(Opacity)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.6 IS 12235(Part 14)(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
10.4 IS 12235(Part 19)(Flattening Test)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

upto 630mm

15900 View breakup
Rs.15000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3 (Length of Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(iv) Length of spigot, l1)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4.1 (e3min=0.75e)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1(Appearance:- )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1(Appearance:- )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Colour )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

upto 630mm

55288 View breakup
Rs.56175/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.4(Length of pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1(Hydraulic Charactristics, Annex-A)	-	25100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3(Density, Annex A of IS 7328)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5(Thermal Stability to Oxidation, Annex-D)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7(Tensile yield strength, Annex-J)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7(Elongation at break, Annex-J)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
8.8(Resistance to Weathering, Annex-F)	-	9000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.9(Squeeze off, Annex-G)	-	6350	25% DISCOUNT ON TEST CHARGES FOR BIS
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2(Reversion Test. Annex-C)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

upto 160mm

8131 View breakup
Rs.8131/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4(Size Designation)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5(Colour of fittings)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1,Table 1(Wall thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 ,Table 2&3(Socket Dimensions)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Dimensions of waste trap(Nahani Trap)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8(Sealing Rings)	-	375	25% DISCOUNT ON TEST CHARGES FOR BIS
11.2(Socket and spigot configeration)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
11.4,Table 5(Vent cowl)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
11.5,Table 6(Pipe Clips)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
10(Workmanship)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
12.1(Visual appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1(Solvent cement type or Rubber ring type)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
12.2(Stress relief test)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
12.3(Vicat softening tempewrature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.15, Annex B(Sulphated Ash Content)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS
16.1(Impact test)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
17(Watet tightness of joint)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

29099 View breakup
Rs.33599/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Types)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 5(Construction)	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.1(Workmanship)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2(Substance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Accelerated ageing test)	-	4200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.4(water proofness test)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.5(Strenght of joints/seams)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.6(Flex test)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 7.1(Eyelets and rope lashing)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-LN Light, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-MN Medium, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-HN Heavy, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XHN Extra heavy, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XHN Extra Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table1 - v)(Dart Impact Strength)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	10180	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 14605 (1998)

Irrigation equipment - Micro sprayers - Specification

9563 View breakup
Rs.9563/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Materials)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.2(Construction and workmanship)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.3(Threaded connections)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 7.1(Resistance of threaded connections)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 7.2(Resistance to hydrostatic pressure at ambient temperature)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.2(Uniformity of flow rate)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.3(Performance characteristics)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.4.2(Water distribution curves)	-	1500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.4.3(Diameter of coverage)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.4.4(Spray coverage patters)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9(Durability test)	-	6250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
0.0

IS 14483 : Part 1 (1997)

Fertilizer and chemical injecfion system: Part 1 venturi injector

6375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONSTRUCTIONAL REQUIREMENTS)	-	500	25% DISCOUNT FOR BIS
4.2(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.3(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.4(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.5(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.6(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
5.1(Resistance of Venturi Injector to Internal Hydrostatic Pressure)	-	1000	25% DISCOUNT FOR BIS
5.2(Performance Test)	-	7000	25% DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

upto 1000mm

8681 View breakup
Rs.8681/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	0	25 % DISCOUNT FOR BIS
3(Designation)	-	0	25 % DISCOUNT FOR BIS
4(Colour)	-	300	25 % DISCOUNT FOR BIS
6(Dimensions of pipes)	-	250	25 % DISCOUNT FOR BIS
7(Visual Appearance)	-	300	25 % DISCOUNT FOR BIS
8.1(Hydraulic characteristics)	-	6400	25 % DISCOUNT FOR BIS
8.2(Reversion)	-	700	25 % DISCOUNT FOR BIS
8.3(Density)	-	500	25 % DISCOUNT FOR BIS
8.4(Melt Flow Rate)	-	1100	25 % DISCOUNT FOR BIS
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % DISCOUNT FOR BIS
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	25 % DISCOUNT FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

8038 View breakup
Rs.8038/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
4.7(Vinyl Chloride Polymer content - Annex A)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
4.9 and 6.1(Viscosity)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

upto 200mm

35069 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(QUICK COUPLED PIPES)	-	19175	TEST CHARGES AS PER PART 1 25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 (b)(HDPE couplers —)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 (a)( Quick Coupled Male and Female Couplers)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1850	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 .1.2.1(HDPE couplers)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 .3(Workmanship and Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.4(a)(Holding Attachments for Coupler Parts)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.5(Rubber Ring)	-	6300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.1, 6.1.1.1(Leakage Test)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3, 6.1.3.1(Weldability Test)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3.1.1(Weldability Test)	-	4800	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

upto 200mm

17563 View breakup
Rs.14519/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1625	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 table -1(DIMENSIONS OF PIPES)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2(Ovality)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(VISUAL APPEARANCE)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 Table -2(Hydraulic Characteristics)	-	6400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Reversion Test)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4table-2(Fusion Compatibility Test)	-	6400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Tensile Test)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.6(Melt now Rate (MFR))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

Bureau of Indian Standards

The National Standards Body of India

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 cipetptchyd@gmail.com

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found