BIS - LIMS (Laboratory Information Management System)

Electrical Research and Development Association, gujarat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940719 uday.puntambekar@erda.org

Scope List

Reset

154 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

121

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

68250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	NA
7.0(Construction)	-	27880	Above test charges included charges of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING: 2000, charges of Vibration test : 25880. Total Test Charges: (2000+25880)= 27880.
8.0(Creepage Distance and Clearances)	-	500	NA
9.0(Provision for earthing)	-	500	NA
10.0(Terminals)	-	0	NA
11.0(External & Internal Wiring)	-	0	NA
12.0(Protection against electric shock)	-	500	NA
13.0(Endurance Tests and Thermal Tests)	-	17600	Above test charges included of charges ENDURANCE TEST: 11600, charges of thermal normal test: 3000, thermal abnormal charges: 3000. Total test charges: (11600+3000+3000)= 17600.
14.0(Resistance to Dust & Moisture)	-	13349	Above test charges included charges of Resistance to dust [IP 54/IP65/IP66]: 7849, charges of RESISTANCE TO MOISTURE: 5500. Total test charges: (7849+5500)= 13349.
15.0(Insulation Resistance and Electric Strength)	-	1000	NA
16.0(Resistance to Heat , fire and tracking)	-	12070	Above test charges included charges of RESISTANCE TO HEAT: 1500, [NEEDLE FLAME TEST] charges: 3500, [GLOW WIRE TEST]: 5000, RESISTANCE TO TRACKING: 2070. Total test charges: (1500+3500+5000+2070)=12070
17.0(Functional Safety)	-	30000	NA
18.0(Changeover Operation)	-	6000	NA
19.0(High Temperature Operation)	-	6000	NA
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	6000	NA
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	3000	NA
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	3000	NA

Complete

30 Nov, 2025

-
-

122

IS/IEC 60079 : Part 1 (2014)

Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d"

161600 View breakup
Rs. 13,500/- (for routine test only) ; Rs.1,61,600/-(for product wise applicable tests) Documentation charges will be Rs. 6,000/- Extra.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Openings for breathing or draining)	-	6000	Documentation charges
10.3(Composition limits)	-	0	charges included documentation charges
10.4(Dimensions)	-	0	charges included documentation charges
10.5(Elements with measurable paths)	-	0	Nil
10.6(Elements with non-measurable paths)	-	0	Nil
10.7.1(Removable devices)	-	0	Nil
10.7.2(Mounting arrangements of the elements)	-	0	Nil
10.7.2(Mounting arrangements of the elements)	-	0	Nil
10.7.2(Mounting arrangements of the elements)	-	0	Nil
10.8(Mechanical strength)	-	2000	Nil
10.9(Breathing devices and draining devices when used as Ex components)	-	0	refer sub clause
10.9.1(General)	-	0	Nil
10.9.2(Mounting arrangements of the elements and components)	-	0	Nil
10.9.2(Mounting arrangements of the elements and components)	-	0	Nil
10.9.3.3(Test for non-transmission of an internal ignition - Test procedure as per Cl 10.9.3.3.2)	-	12200	Nil
10.9.3.4(Test of the ability of the breathing and draining device to withstand pressure -Test procedure as per Cl 10.9.3.4.1)	-	4500	Nil
10.9.4(Ex component certificate)	-	0	charges included documentation charges
6(Sealed joints)	-	3200	Nil
6.1(Cemented joints)	-	0	refer cl. no. 6 charges
6.1.1(General)	-	0	refer cl. no. 6 charges
6.1.2(Mechanical strength)	-	0	refer cl. no. 6 charges
6.1.2(Mechanical strength)	-	0	refer cl. no. 6 charges
6.1.2(Mechanical strength)	-	0	refer cl. no. 6 charges
6.1.3(Width of cemented joints)	-	0	refer cl. no. 6 charges
6.2(Fused glass joints)	-	0	refer cl. no. 6 charges
6.2.2(Width of fused glass joints)	-	0	refer cl. no. 6 charges
15.2.2(Determination of explosion pressure (reference pressure))	-	10800	Nil
13.1(Entries for flameproof enclosures)	-	3200	Nil
13.1(Entries for flameproof enclosures)	-	0	refer cl. no. 13.1
13.2(Threaded holes)	-	0	refer cl. no. 13.1
13.2(Threaded holes)	-	0	refer cl. no. 13.1
13.3(Non-threaded holes (for Group I only))	-	0	refer cl. no. 13.1
13.4(Cable glands)	-	0	refer cl. no. 13.1
13.4(Cable glands)	-	0	refer cl. no. 13.1
13.5.1(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.1(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.2(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.3(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.3(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.3(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.6.1(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.2(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.3(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.4(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.5(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.7(Bushings)	-	0	refer cl. no. 13.1
13.7(Bushings)	-	0	refer cl. no. 13.1
13.8(Blanking elements)	-	0	refer cl. no. 13.1
13.8(Blanking elements)	-	0	refer cl. no. 13.1
13.8(Blanking elements)	-	0	refer cl. no. 13.1
11.1(Fasteners and openings)	-	2300	Nil
11.2(Fasteners and openings)	-	0	refer cl. no. 11.1
11.3(Fasteners and openings)	-	0	refer cl. no. 11.1
11.4(Fasteners and openings)	-	0	refer cl. no. 11.1
11.5(Fasteners and openings)	-	0	refer cl. no. 11.1
11.6(Fasteners and openings)	-	0	refer cl. no. 11.1
11.7(Fasteners and openings)	-	0	refer cl. no. 11.1
11.8(Fasteners and openings)	-	0	refer cl. no. 11.1
11.9(Fasteners and openings)	-	0	refer cl. no. 11.1
5(Flameproof joints)	-	3200	Nil
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.2(Non-threaded joints)	-	0	refer cl. no. 5
5.2.1(Width of joints (L))	-	0	refer cl. no. 5
5.2.1(Width of joints (L))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.3(Spigot joints)	-	0	refer cl. no. 5
5.2.4(Holes in joint surfaces)	-	0	refer cl. no. 5
5.2.5(Conical joints)	-	0	refer cl. no. 5
5.2.6(Joints with partial cylindrical surfaces (not permitted for Group IIC))	-	0	refer cl. no. 5
5.2.6(Joints with partial cylindrical surfaces (not permitted for Group IIC))	-	0	refer cl. no. 5
5.2.7(Flanged joints for acetylene atmospheres)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.9(Multi-step joints)	-	0	refer cl. no. 5
5.2.9(Multi-step joints)	-	0	refer cl. no. 5
5.2.9(Multi-step joints)	-	0	refer cl. no. 5
5.3(Threaded joints)	-	0	refer cl. no. 5
5.4(Gaskets (including O-rings))	-	0	refer cl. no. 5
5.4(Gaskets (including O-rings))	-	0	refer cl. no. 5
5.5(Equipment using capillaries)	-	0	refer cl. no. 5
9(Light-transmitting parts)	-	0	Included in documentation charges
20(Marking)	-	2000	Nil
20.1(General)	-	0	refer cl. no. 20
20.2(Caution and warning markings)	-	0	refer cl. no. 20
20.3(Informative markings)	-	0	refer cl. no. 20
12.1(Materials)	-	0	Included in documentation charges
12.2(Materials)	-	0	Included in documentation charges
12.3(Materials)	-	0	Included in documentation charges
12.4(Materials)	-	0	Included in documentation charges
12.5(Materials)	-	0	Included in documentation charges
12.6(Materials)	-	0	Included in documentation charges
12.7(Materials)	-	0	Included in documentation charges
12.8(Materials)	-	0	Included in documentation charges
7(Operating rods)	-	3200	Nil
7(Operating rods)	-	0	refer cl. no. 7
8.1.1(Joints of shafts)	-	3200	Nil
8.1.1(Joints of shafts)	-	0	refer cl. no. 8.1.1
8.1.2(Cylindrical joints)	-	0	refer cl. no. 8.1.1
8.1.3(Labyrinth joints)	-	0	refer cl. no. 8.1.1
8.1.4(Joints with floating glands)	-	0	refer cl. no. 8.1.1
8.2.1(Sleeve bearings)	-	0	refer cl. no. 8.1.1
8.2.1(Sleeve bearings)	-	0	refer cl. no. 8.1.1
8.2.2(Rolling-element bearings)	-	0	refer cl. no. 8.1.1
19.4(Test of erosion by flame)	-	21600	Nil
15.2.3.2(Overpressure test – First method (static))	-	15300	Nil
14(Voltage, Current, Power, Torque, Speed, Temperature)	-	68900	IP test will be charged separately.

Complete

30 Nov, 2025

-
-

123

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

Cell and Battery capacity up to 800 Ah. (Lead acid & N

625800 View breakup
Lead acid cell/battery (Vented/monobloc/VRLA) & NI-Cd Cell/ Battery rating up to 800Ah : Rs. 6,25,800/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	0	---
5.1(Mechanical Endurance)	-	0	---
5.2(Charge efficiency)	-	0	---
5.3(Deep discharge protection)	-	0	---
5.4(Marking)	-	0	---
5.5(Dafety)	-	0	---
5.6(Documentation)	-	0	---
6(Finctional Characteristics)	-	0	---
7(General test conditions)	-	0	---
8.1(Capacity test)	-	6550	---
8.2(Endurance test)	-	207950	---
8.3(Charge retention test)	-	28750	---
8.4(Cycle endurance in Photovoltaic application)	-	315850	---
8.5(Sulphation Test)	-	32550	---
8.6(Water loss test)	-	31800	---
8.7(Non spillability)	-	2350	---

Complete

30 Nov, 2025

-
-

124

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

328746 View breakup
Rs. 3,28,746/- (For complete testing) One rating: Seq A1 Rs. 9,464/- ; Seq A2 Rs. 1,725/- ; Seq B Rs. 1,05,840/- ; Seq C1 Rs. 53,820/- ; Seq C2 Rs. 21,390/- ; Seq D0 Rs. 7,188/- ; Seq D Rs. 62,848/- ; Seq E1 Rs. 33,409/- ; Seq E2 Rs. 33,409/- ; Seq E3 Rs. 33409/- Routine tests: Rs. 4,428/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification, IS 60898-1)	-	500	-
4.4(Classification, IS 60898-1)	-	500	-
4.3(Classification, IS 60898-1)	-	500	-
4.5(Classification, IS 60898-1)	-	500	-
4.5.1(Classification, IS 60898-1)	-	500	-
4.5.2(Classification, IS 60898-1)	-	500	-
4.6(Classification, IS 60898-1)	-	500	-
4.7(Classification, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
8.1.1(General, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.3(Clearances and creepage distances, IS 60898-1)	-	650	-
8.1.4.1(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.4.2(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.4.3(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.4.4(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.5.1(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.2(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.3(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.4(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.5(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.6(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.7(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.8(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.9(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.10(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.11(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.12(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.2(Protection against Electric Shock, IS 60898-1)	-	500	-
8.3.2(Dielectric strength at power frequency, IS 60898-1)	-	500	-
8.3.3(Isolating capability, IS 60898-1)	-	500	-
8.3.4(Dielectric strength at rated impulse withstand voltage ( Uimp), IS 60898-1)	-	500	-
8.4(Temperature-rise, IS 60898-1)	-	3680	-
8.5(Uninterrupted duty, IS 60898-1)	-	500	-
8.6(Automatic operation, IS 60898-1)	-	500	-
8.7(Mechanical and electrical endurance, IS 60898-1)	-	12305	-
8.9(Resistance to mechanical shock and impact, IS 60898-1)	-	4370	-
8.1(Resistance to heat, IS 60898-1)	-	1725	-
8.11(Resistance to abnormal heat and to fire, IS 60898-1)	-	3220	-
8.12(Resistance to rusting, IS 60898-1)	-	1392	-
8.13(Power loss, IS 60898-1)	-	500	-
9.3(Test of indelibility of marking, IS 60898-1)	-	500	-
9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-	500	-
9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.6(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.1(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.2(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.3(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.4(Test of protection against electric shock, IS 60898-1)	-	500	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8.5(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.9(28- day test, IS 60898-1)	-	81650	-
9.7.1(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.2(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.3(Test of protection against electric shock, IS 60898-1)	-	500	-
9.10.2(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.10.3(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.10.4(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.10.5(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.11(Verification of mechanical and electrical endurance, IS 60898-1)	-	12305	-
9.13.1(Mechanical Stress, IS 60898-1)	-	4370	-
9.13.2.2(Mechanical Stress, IS 60898-1)	-	4370	-
9.13.2.4(Mechanical Stress, IS 60898-1)	-	4370	-
9.13.2.5(Mechanical Stress, IS 60898-1)	-	4370	-
9.14.1(Test of resistance to heat, IS 60898-1)	-	1725	-
9.14.2(Test of resistance to heat, IS 60898-1)	-	1725	-
9.14.3(Test of resistance to heat, IS 60898-1)	-	1725	-
9.15(Resistance to abnormal heat and to fire)	-	3220	-
9.16(Test of resistance to rusting)	-	1392	-
8.1.6(Non-interchangeability)	-	500	-
9.13(Resistance to mechanical shock and impact)	-	4370	-
I.2(Tripping tests)	-	3163	-
I.3(Verification of clearances between open contacts)	-	1265	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.3(Clearances and creepage distances, IS 60898-1)	-	650	-
8.4(Temperature-rise, IS 60898-1)	-	3680	-
9.6(Test of protection against electric shock, IS 60898-1)	-	500	-
9.6(Test of protection against electric shock, IS 60898-1)	-	500	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-

Complete

30 Nov, 2025

-
-

125

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

56625 View breakup
Rs. 56,625/-(Except Vibration Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	500	NA
20.7(Construction)	-	27880	Above test charges included charges of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING: 2000, and charges of Vibration test : 25880. Total Test charges: (2000+25880)=27880.
20.8(Creepage Distance and Clearances)	-	500	NA
20.10(Terminals)	-	0	NA
20.11(External & Internal Wiring)	-	0	NA
20.12(Protection against electric shock)	-	500	NA
20.13(Endurance Tests and Thermal Tests)	-	17600	Above test charges included charges of endurance test: 11600, charges of thermal normal test: 3000 & thermal abnormal test: 3000. Total test charges: (11600+3000+3000)= 17600.
20.14(Resistance to Dust & Moisture)	-	13349	Above test charge included charges of Resistance to dust [IP 54/IP65/IP66]: 7849, charges of RESISTANCE TO MOISTURE: 5500. Total test charges: (7849+5500)= 13349.
20.15(Insulation Resistance and Electric Strength)	-	1000	NA
20.16(Resistance to Heat , fire and tracking)	-	12070	Above test charges included of charges RESISTANCE TO HEAT: 1500, charges of NEEDLE FLAME TEST: 3500, charges of GLOW WIRE TEST: 5000, charges of RESISTANCE TO TRACKING: 2070. Total test charges: (1500+3500+5000+2070)= 12070.
20.9(Provision for earthing)	-	500	NA

Complete

30 Nov, 2025

-
-

126

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

33375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.2 (Marking.)	-	900	NA
Clause No. 4.3(Mechanical requirement for caps)	-	91500	a) Torsion resistance on unused lamps + 6 degree angular displacement : 1600 b) Heating treatment for 2000 hours+ 6 degree angular displacement+ Torsion after heating : 89000 c) Dimension of caps: 900
Clause No. 4.4(Insulation Resistance Measurement)	-	1000	NA
Clause No. 4.5(Electric strength )	-	1000	NA
Clause No. 4.6(Parts which can become accidentally live)	-	900	NA
Clause No. 4.7(Resistance to heat & fire)	-	13300	a) Resistance to heat : 12100 b) Resistance to fire: 1200
Clause No. 4.8(Creepage distance for caps)	-	900	NA
Clause No. 4.9(Lamp cap temperature rise)	-	4800	NA
Clause No. 4.10(Lamp minimum overall length)	-	900	NA

Complete

30 Nov, 2025

-
-

127

IS 2418 : Part 2 (2018)

Tubular fluorescent lamps for general lighting service: Part 2 performance requirements (Second Revision)

45500 View breakup
Rs. 45,500/- (Up to 2000 hrs. life) ; Rs. 30,000/- (For additional every 1500 hrs. beyond 2000 hrs. life)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6 of IS 2418:2:2018(MARKING)	-	500	NA
Cl 7.3 of IS 2418:2:2018(Visual Examination and Checking for Marking)	-	500	NA
Cl 7.4 of IS 2418:2:2018(Burning Test)	-	2250	NA
Cl 7.5 of IS 2418:2:2018(Starting Characteristics)	-	2250	NA
Cl 7.6 of IS 2418:2:2018(Test for Electrical Luminous and Colour Characteristics)	-	7900	NA
Cl 7.7 of IS 2418:2:2018(Chromaticity Co-ordinates )	-	7900	NA
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	40000	1. Test charges Rs.40000/- for Life and Lumen maintenance test up to 2000 hrs. 2. Test charges Rs.30000/- for additional every 1500 hrs. beyond 2000 hrs. life and lumen maintenance.
Cl 6 of IS 2418:2:2018(MARKING)	-	500	NA
Cl 5 of IS 2418:2:2018(MECHANCIAL, PHYSICAL AND STARTING REQUIREMENTS)	-	700	NA
Clause No. 7.4 & & 7.5(Burning Test & Starting Characteristics)	-	4500	NA
4.2 of IS 2418 : Part 1 (2018(Marking.)	-	900	NA
4.3 of IS 2418 : Part 1 (2018)(Mechanical requirement for caps)	-	91500	1. Test charges Rs.1600/- for torsion on unused amps + 6 deg. angular displacement. 2. Test charges Rs.89000/- for heating treatment for 2000 hrs. + 6 deg. angular displacement + torsion after heating 3. Test charges Rs.900/- for dimension of caps
4.4 of IS 2418 : Part 1 (2018)(Insulation Resistance Measurement)	-	1000	NA
4.5 of IS 2418 : Part 1 (2018)(Electric strength)	-	1000	NA
4.6 of IS 2418 : Part 1 (2018)(Parts which can become accidentally live)	-	900	NA
4.7 of IS 2418 : Part 1 (2018)(Resistance to heat & fire)	-	13300	NA
4.8 of IS 2418 : Part 1 (2018)(Creepage distance for caps)	-	900	NA
4.9 of IS 2418 : Part 1 (2018)(Lamp cap temperature rise)	-	4800	NA
4.10 of IS 2418 : Part 1 (2018)(Lamp minimum overall length)	-	900	NA

Complete

30 Nov, 2025

-
-

128

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

Up to 110 kW 2 & 4 pole, 90 kW 6 pole, 75 kW 8 pole

166571 View breakup
Upto 5.5 kW Rs. 49,314/- ; 5.5 kW to 11 kW Rs. 55,303/- ; 11 kW to 22 kW Rs. 79,920/- ; 22.1 kW to 45 kW : Rs. 1,06,788/- ; 45.1 kW to 75 kW : Rs. 1,31,838/- ; 75.1 to 110 kW : Rs. 1,66,571/-. (For all tests)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18.3(Marking)	-	1000	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 600 45.1 to 75 kW: Rs. 750 75.1 kW to 110 kW: Rs. 1000
16.2.1(Dimensions)	-	5000	Up to 5.5 kW: Rs. 715 5.5 to 11 kW: Rs. 715 11 to 22 kW: Rs. 1425 22.1 to 45 kW: Rs. 2300 45.1 to 75 kW: Rs. 3000 75.1 kW to 110 kW: Rs. 5000
16.1.2(Measurement of Resistance of Windings of Stator)	-	1200	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 700 45.1 to 75 kW: Rs. 900 75.1 kW to 110 kW: Rs 1200
16.1.3(No Load Test)	-	2000	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 900 45.1 to 75 kW: Rs. 1200 75.1 kW to 110 kW: Rs. 2000
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	1500	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 700 45.1 to 75 kW: Rs. 900 75.1 kW to 110 kW: Rs 1500
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	4500	Up to 5.5 kW: Rs. 600 5.5 to 11 kW: Rs. 920 11 to 22 kW: Rs. 2116 22.1 to 45 kW: Rs. 2500 45.1 to 75 kW: Rs. 3000 75.1 kW to 110 kW: Rs. 4500
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	10000	Up to 5.5 kW: Rs. 1892 5.5 to 11 kW: Rs. 2386 11 to 22 kW: Rs. 4778 22.1 to 45 kW: Rs. 6000 45.1 to 75 kW: Rs. 7500 75.1 kW to 110 kW: Rs. 10000
16.2.4(Temperature Rise Test)	-	14000	Up to 5.5 kW: Rs. 2590 5.5 to 11 kW: Rs. 4025 11 to 22 kW: Rs. 8039 22.1 to 45 kW: Rs. 8000 45.1 to 75 kW: Rs. 11000 75.1 kW to 110 kW: Rs. 14000
16.2.5(Momentary Overload Test)	-	4000	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 600 11 to 22 kW: Rs. 1380 22.1 to 45 kW: Rs. 2500 45.1 to 75 kW: Rs. 3000 75.1 kW to 110 kW: Rs. 4000
16.1.1(Insulation Resistance Test)	-	800	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 500 45.1 to 75 kW: Rs. 600 75.1 kW to 110 kW: Rs 800
16.1.6(High Voltage Test)	-	800	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 500 45.1 to 75 kW: Rs. 600 75.1 kW to 110 kW: Rs. 800
16.3.1( Test for Vibration Severity of Motor)	-	6000	Up to 5.5 kW: Rs. 1145 5.5 to 11 kW: Rs. 1145 11 to 22 kW: Rs. 2290 22.1 to 45 kW: Rs. 3500 45.1 to 75 kW: Rs. 4500 75.1 kW to 110 kW: Rs. 6000
9.0(Terminal Marking)	-	1000	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 600 45.1 to 75 kW: Rs. 750 75.1 kW to 110 kW: Rs. 1000
8.0(Earthing)	-	1000	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 600 45.1 to 75 kW: Rs. 750 75.1 kW to 110 kW: Rs. 1000
16.3.4(Over Speed Test)	-	4000	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 500 22.1 to 45 kW: Rs. 2500 45.1 to 75 kW: Rs. 3000 75.1 kW to 110 kW: Rs. 4000
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	56000	Up to 5.5 kW: Rs. 10360 5.5 to 11 kW: Rs. 14000 11 to 22 kW: Rs. 27960 22.1 to 45 kW: Rs. 32000 45.1 to 75 kW: Rs. 44000 75.1 kW to 110 kW: Rs. 56000
16.3.2( Test for Noise Levels of Motor)	-	10000	Up to 5.5 kW: Rs. 10000 5.5 to 11 kW: Rs. 10000 11 to 22 kW: Rs. 10000 22.1 to 45 kW: Rs. 10000 45.1 to 75 kW: Rs. 10000 75.1 kW to 110 kW: Rs. 10000
16.3.3( Test for Degree of Protection by Enclosure)	-	38271	Up to 5.5 kW: Rs. 16012 5.5 to 11 kW: Rs. 16012 11 to 22 kW: Rs. 16012 22.1 to 45 kW: Rs. 29088 45.1 to 75 kW: Rs. 32088 75.1 kW to 110 kW: Rs. 38271
6(Method of cooling)	-	500	Nil
12.2(Pull up torque)	-	5000	Up to 5.5 kW: Rs. 500 5.5 to 11 kW: Rs. 500 11 to 22 kW: Rs. 920 22.1 to 45 kW: Rs. 2800 45.1 to 75 kW: Rs. 3800 75.1 kW to 110 kW: Rs. 5000

Complete

30 Nov, 2025

-
-

129

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

Cells and Batteries used in portable applications, Nic

204460 View breakup
For nickel cadmium cells : Rs. 2,04,460/- ; For nickel cadmium Batteries : Rs. 1,36,160/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	---
5(General Safety Considerations)	-	1000	---
5.1(General)	-	0	---
5.2(Insulation and Wiring)	-	0	---
5.3(Venting)	-	0	---
5.4(Temperature, Voltage and Current Management)	-	0	---
5.5(Terminal Contacts)	-	0	---
5.6(Assembly of Cells into batteries)	-	0	---
5.7(Quality Plan)	-	0	---
6(Tyoe Test amd Sample Size)	-	500	---
7(Specific requirements and tests)	-	0	---
7.1(Charging procedure for test purposes)	-	40000	---
7.2(Intended Use)	-	80000	For cells : Rs. 75000/- For Batteries: Rs. 40000/-
7.3(Reasonably foreseeable misuse)	-	84960	For cells : Rs. 84960/- For Batteries: Rs. 51660/-
8.1(General)	-	1000	---
8.2(Small Cell and battery safety information)	-	0	---
9(Marking)	-	1000	---
9.1(Cell Marking)	-	0	---
9.3(Caution for ingestion of small cells and batteries)	-	0	---
9.4(Other information)	-	0	---
10(Packaging)	-	500	---

Complete

30 Nov, 2025

-
-

130

IS 16046 : Part 2 (2018)

Cells and Batteries used in portable applications, Lith

133500 View breakup
For Lithium cells : Rs. 1,33,500/- ; For Lithium batteries : Rs. 1,32,160/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	---
5(General Safety Considerations)	-	1000	---
5.1(General)	-	0	---
5.2(Insulation and Wiring)	-	0	---
5.3(Venting)	-	0	---
5.4(Temperature, Voltage and Current Management)	-	0	---
5.5(Terminal Contacts)	-	0	---
5.6(Assembly of Cells into batteries)	-	0	---
5.7(Quality Plan)	-	0	---
5.8(Battery Safety Components)	-	0	---
6(Type Test and Sample Size)	-	500	---
7(Specific requirements and tests)	-	0	---
7.1(Charging procedure for test purposes)	-	40000	---
7.2(Intended Use)	-	40000	For cell : Rs. 40000/- For Battery : 5000/-
7.3(Reasonably foreseeable misuse)	-	82660	For cell: Rs. 49000/- For battery: Rs. 82660/-
8(Information for safety)	-	1000	---
8.1(General)	-	0	---
8.2(Small Cell and battery safety information)	-	0	---
9(Marking)	-	1000	---
9.1(Cell Marking)	-	0	---
9.2(Battery Marking)	-	0	---
9.3(Caution for ingestion of small cells and batteries)	-	0	---
9.4(Other information)	-	0	---
10(Packaging)	-	500	---

Complete

30 Nov, 2025

-
-

131

IS 6162 : Part 1 (1971)

Specification for paper - Covered aluminium conductors: Part 1 round conductors

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Diameter)	-	600	NA
4.3(Resistance)	-	800	NA
4.4(Tensile strength and Elongation)	-	800	NA
6.3(Arrangement of Paper layers)	-	600	NA
7(Overall diameter and increase in diameter)	-	1200	NA
4.5(IS 6162 Part-1)	-	600	NA
4.6(IS 6162 Part-1)	-	0	NA
4.7(IS 6162 Part-1)	-	600	NA

Complete

30 Nov, 2025

-
-

132

IS 6162 : Part 2 (1971)

Specification for paper covered aluminium conductors: Part 2 rectangular conductors

2400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2 a(Conductor dimensions)	-	600	NA
10.2 b(Arrangement of Paper layers)	-	600	NA
10.2 c(Increase in dimension)	-	600	NA
10.2 d(Overall dimension)	-	600	NA

Complete

30 Nov, 2025

-
-

133

IS 7347 (1974)

Specification for performance of small size spark ignition engines

Up to 110 kW

55600 View breakup
Rs. 55,600/-** for full test. (Only rating test Rs. 9,600/-) **Fuel charges and oil charges will be at actuals. Note: Presence of skill person is required for dismantle/assembly of engine.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No.10.1(a)(Marking )	-	600	-
Cl.No.10.1(b)(Marking )	-	600	-
Cl.No.10.1(c)(Marking )	-	600	-
Cl.No.9.1(h)(Reassembly ,Starting test and no load test)	-	600	-
Cl.No.9.1(g)(Strip Examination)	-	3600	-
Cl.No.9.1(f)(Rating test after endurance test)	-	6000	-
Cl.No.9.1(e)(Endurance test)	-	35000	-
Cl.No.9.1(d)(Starting test)	-	1450	-
Cl. No.9.1(c)(No load and Low speed test)	-	2350	-
Cl.No.9.1(a), Cl.No.9.3.1(Governing test)	-	2350	-
Cl.No.9.1(a)(Rating test including Fuel consumption test)	-	6000	-

Complete

30 Nov, 2025

-
-

134

IS 9537 : Part 1 (1980)

Specification for conduits for electrical installations: Part 1 general requirements

29950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions)	-	500	NA
9 & 9.2("Mechanical properties Bending test ")	-	6700	NA
9.3(Compression test)	-	700	NA
9.4(Impact test)	-	8300	NA
9.5(Collapse test)	-	1700	NA
10(Resistance to heat)	-	7500	NA
11(Resistance to burning)	-	1000	NA
6(Marking)	-	0	NA
8(Constrution)	-	0	NA
12(Electrical strength test & Insulation resistance test)	-	2000	NA

Complete

30 Nov, 2025

-
Exclude Cl. No. 13 Corrosion and polluting substances.

135

IS 10001 (1981)

Performance Requirements for Constant Speed Compression ignition (diesel) engines for general purposes (up to 20 kW)

Rated power: up to 20 kW

174000 View breakup
For performance test (above 3.5 kW) charges will be Rs. 21,700/- ; For all tests: Rs. 99,558/-** upto 20 kW. For all tests: Rs. 1,74,000/-** (for two cylinder engine) ** Fuel & Oil charges for all test will be at actual. For initial Performance test Rs. 3,000/- will be charge extra.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No.7(a)(Marking )	-	1000	Nil
Cl.No.7(b)(Marking )	-	1000	Nil
Cl.No.7(c)(Marking )	-	1000	Nil
Cl.No.7(d)(Marking )	-	1000	Nil
Cl.No.7(e)(Marking )	-	1000	Nil
Cl.No.3.1(d), Cl.No.3.5.2(Governing test)	-	0	Nil
Cl.No.3.5.5(Lubricating Oil Consumption test)	-	8000	Nil
Cl.No.3.1(e)(Endurance test)	-	85000	Nil
Cl.No.3.1(b)(Preliminary run test)	-	12000	Nil
Cl.No.3.1(a)(Dimensional Measurenment for wear.)	-	22000	Nil
Cl.No.4.2(Specific Fuel Consumption)	-	0	Nil
3.1 ( c)(Speed, Temperature, SFC)	-	21000	Nil
3.1 (f)(Speed, Temperature, SFC)	-	10000	Nil
3.1 (g)(Speed, Temperature, SFC)	-	8000	Nil
3.1 (h)(Speed, Temperature, SFC)	-	0	Nil
3.2(SFC)	-	0	Nil
3.3(Power)	-	0	Nil
3.4(Efficiency)	-	0	Nil
3.5(Speed, Temperature, SFC)	-	0	Nil
4.1(ml/hr)	-	0	Nil

Complete

30 Nov, 2025

-
-

136

IS 10002 (1981)

Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Above 20 KW)

Rated power: up to 20 kW

174000 View breakup
For performance test charges will be Rs. 21,700/- ; For all tests: 20.1 kW to 45 kW Rs. 99,558/-** ; for 45.1 kW to 75 kW Rs. 1,24,200/-** ; for 75.1 kW to 110 kW Rs. 1,74,000/-** . ** Fuel & Oil charges for all test will be at actual. For initial Performance test Rs. 3,000/- will be charge extra.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No.7(a)(Marking )	-	1000	Nil
Cl.No.7(b)(Marking )	-	1000	Nil
Cl.No.7(c)(Marking )	-	1000	Nil
Cl.No.7(d)(Marking )	-	1000	Nil
Cl.No.7(e)(Marking )	-	1000	Nil
Cl.No.3.1(f), (Governing test)	-	0	Nil
Cl.No.3.5(Lubricating Oil Consumption test)	-	8000	Nil
Cl.No.3.1(e)(Endurance test)	-	85000	Nil
Cl.No.3.1(b)(Preliminary run test)	-	12000	Nil
Cl.No.3.1(a)(Dimensional Measurenment for wear.)	-	22000	Nil
Cl.No.4.2(Specific Fuel Consumption)	-	0	Nil
3.1 ( c)(Speed, Temperature, SFC)	-	21000	Nil
3.1 (d)(Speed, Temperature, SFC)	-	85000	Nil
3.1 (g)(Speed, Temperature, SFC)	-	8000	Nil
3.1 (h)(Speed, Temperature, SFC)	-	0	Nil
3.2(SFC)	-	0	Nil
3.3(Power)	-	0	Nil
3.4(Efficiency)	-	0	Nil
3.6(Speed, Temperature, SFC)	-	0	Nil
4.1(Power)	-	0	Nil
4.2(SFC)	-	0	Nil
4.3(ml/hr)	-	0	Nil

Complete

30 Nov, 2025

-
-

137

IS 9335 : Part 3 : Sec 1 (1984)

Specification for cellulosic papers for electrical purposes: Part 3 specifications for individual materials: Sec 1 general purpose electrical paper

All

29670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, Table 1(Thickness)	-	375	375
5, Table 1(Substance)	-	1150	1150
5, Table 1(Apparent density)	-	1725	1725
5, Table 1(Tensile strength)	-	1725	1725
5, Table 1(elongation)	-	0	Including tensile strength charges
5, Table 1(Internal tearing resistance)	-	1725	1725
5, Table 1(Moisture Content)	-	1150	1150
5, Table 1(Ash)	-	1725	1725
5, Table 1(Conductivity of Aqueous Extract)	-	1725	1725
5, Table 1(pH of Aqueous Extract)	-	1725	1725
5, Table 1(Air permeability)	-	1150	1150
5, Table 1(Water absorption)	-	920	920
5, Table 1(Electric strength)	-	1150	1150
5, Table 1(Dissipation factor of dry un impregnated paper)	-	2875	2875
5, Table 1(Heat Stability)	-	10350	10350

Complete

30 Nov, 2025

-
Exclusion: 5, Table 1 (Edge Tearing Resistance), Cl. 5, Table 1 (Folding Endurance), Cl.5, Table 1 (Chloride content of aqueous extract), Cl. 5, Table 1 (Conductivity of Organic Extract), Cl. 5, Table 1 (Dissipation factor of orgainic extract), Cl. 5, Table 1 (Dissipation factor & Permittivity of impregnated paper), Cl. 5, Table 1 (Conducting Path)

138

IS 11170 (1985)

Specification for 1 performance requirements for constant speed compression ignition (Diesel) engines for agricultural purposes (Up To 20 KW)

upto 110 kW

99558 View breakup
For all tests: Rs. 99,558/- ** (Up to 110 kW) ; Only performance test Rs. 21,700/- . For initial Performance test Rs. 3,000/- will be charge extra. ** Fuel & Oil charges for all test will be at actual. Note: Presence of skill person is required for dismantle/assembly of engine.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	Nil
3.1(a) Preparation for tests according to IS : 10000 (Part 5)-1980)	-	6394	Nil
3.1(b) Preliminary run according to IS : 10000 (Part 5)-1980)	-	12500	Nil
3.1(c) Initial performance test according to Section I of IS : 10000 (Part 8)-1980 )	-	8700	Nil
3.1(d) Endurance test according to Section 1 of IS : 10000 (Part 9)-1980 )	-	54800	Nil
3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;)	-	8600	Nil
3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 )	-	4700	Nil
3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.)	-	3364	Nil
4.1(Power)	-	0	Nil
4.2(SFC)	-	0	Nil
4.3(ml/hr)	-	0	Nil
4.4(Governing)	-	0	Nil
3.6.1(Power)	-	0	Nil
3.6.2(SFC)	-	0	Nil
3.6.3(Governing)	-	0	Nil
3.6.4(SFC, Governing)	-	0	Nil

Complete

30 Nov, 2025

-
-

139

IS 10805 (1986)

Specification for foot - Valves, reflux valves or non - Return valves and bore valves to be used in suction lines of agricultural pumping systems (First Revision)

Size: 4” (Internal thread check up to 3”)

6500 View breakup
Rs. 6,000/- for size upto 2 inch ; Rs. 6,500/- for size above 2 inch. Installation charges will be Rs. 3000/- Extra.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 2 Table 1)(Dimensions)	-	500	NA
(Cl. 2 Table 1)(Dimensions)	-	500	NA
(Cl. 2 Table 1)(Dimensions)	-	500	NA
(Cl. 5)(Coating)	-	0	NA
6.1.1(Seat test)	-	0	NA
6.1.2(Housing test)	-	3000	NA
6.2(K-Value Test for Foot-Valves and Bore Valves)	-	3000	NA
8(Observation)	-	500	NA
4.2(Observation)	-	1000	NA

Complete

30 Nov, 2025

-
-

140

IS 11501 (1986)

Specification for engine monoset pumps for clear, cold, fresh water for agricultural purposes

Rated power: up to 20 kW, Size: 4”

65498 View breakup
Single cylinder- Rs. 55,147/-** ; Double cylinder-Rs. 65,498/- **; ** Fuel & Oil charges for all test will be at actual.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Direction of rotation)	-	500	Nil
6.1(Direction of rotation)	-	500	Nil
9.1(Design Features)	-	0	Nil
9.1(Design Features)	-	0	Nil
10.2(Casing)	-	954	Nil
10.3(Impeller)	-	0	Nil
10.4(Shaft)	-	0	Nil
11.3.2.1(Pump Testing)	-	4882	Nil
11.3.2.3(Pump Testing)	-	4882	Nil
11.4.2.1(Pump Testing)	-	4882	Nil
11.4.2.1(Pump Testing)	-	4882	Nil
11.4.2.2(Pump Testing)	-	4882	Nil
11.4.2.5(Pump Testing)	-	4882	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
14(MARKING)	-	500	Nil
11.3.1(Time)	-	4312	NA
5.1(Material of Construction)	-	0	Nil
5.1(Gaskets, Seals and Packings)	-	0	Nil

Complete

30 Nov, 2025

-
-

141

IS 10322 : Part 5 : Sec 4 (1987)

Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires

60000 View breakup
Rs. 60,000/-(Except Vibration Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	NA
6(Construction)	-	27880	Above test charges included charges of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING: 2000, charges of vibration test: 25880. Total test charges: (2000+25880)=27880.
7(Creepage Distance And Clearances)	-	500	NA
8(Provision for Earthing)	-	500	NA
9(Terminals)	-	0	NA
10(External & Internal Wiring)	-	0	NA
11(Protection Against Electric Shock )	-	500	NA
13.4(Endurance Test and Thermal test)	-	17600	Above test charges included charges of endurance test: 11600, charges of thermal normal test: 3000, charges of thermal abnormal test: 3000. Total test charges=(11600+3000+3000)= 17600.
13.5(Resistance To Dust & Moisture)	-	9000	Above test charges included charges of IP1X/2X/3X/4X: 1500, charges of IPX1/X2: 2000, charges of RESISTANCE TO MOISTURE: 5500. Total test charges=(1500+2000+5500)=9000
13.6(Insulation Resistance and Electric Strength)	-	1000	NA
13.7(Resistance to Heat, Fire & Tracking)	-	12070	Above test charges included charges of RESISTANCE TO HEAT: 1500, charges of NEEDLE FLAME TEST: 3500, charges of GLOW WIRE TEST: 5000, charges of RESISTANCE TO TRACKING: 2070. Total test charges= (1500+3500+5000+2070)= 12070
13.8(Photometric Test)	-	20000	NA
13.3(Mechanical Strength Test )	-	0	NA
Cl. No. 13.2(Visual inspection)	-	0	NA

Complete

30 Nov, 2025

-
-

142

IS 1554 : Part 2 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision)

275100 View breakup
Rs. 2,28,450/- for 1 Core (upto 11 kV) ; Rs. 2,75,100/- for 3 Core (upto 11 kV) ; Multicore cables: additional charges Rs. 500/- per core per test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18.1 a) 1)(Tests on Conductor : Annealing test (for copper))	-	900	NA
18.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	900	NA
18.1 a) 3)(Tests on Conductor : Wrapping test ( for aluminium))	-	500	NA
18.1 a)4)(Tests on conductor : Conductor resistance test - Main conductor )	-	1300	NA
18.1 d) 1)(Phyaical tests for insulation : Tensile Test)	-	2000	NA
18.1 d) 5)( Loss of mass in air oven- Insulation )	-	8600	NA
11.3(INSULATION : Tolerance on Thickness of Insulation)	-	1300	NA
11.2(INSULATION : Thickness of Insulation)	-	0	NA
15.4(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	NA
16.3(Armouring : Dimensions -Wire Diameter)	-	555.55	NA
16.3(Armouring : Dimensions -Formed wire )	-	555.55	NA
13.6 a)(ARMOURING: Tensile Strength)	-	555.55	NA
13.6 b)(ARMOURING: Elongation )	-	555.55	NA
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	555.55	NA
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	555.55	NA
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	555.55	NA
13.6 f)(ARMOURING: Mass of zinc coating )	-	555.55	NA
13.6 g)(ARMOURING: Resistivity)	-	555.55	NA
17.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	1300	NA
17.3.2(Thickness of Outer Sheath : Armoured Cables)	-	1300	NA
18.1 a)4)(Resistance test - Neutral conductor )	-	1300	NA
18.1 d) 1)(Phyaical tests for insulation : Elongation )	-	2000	NA
18.1 d) 2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	8600	NA
18.1 d) 2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0	NA
18.1 d) 2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	8600	NA
18.1 d) 2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	NA
18.1 d) 2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	NA
18.1 d) 2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	NA
18.1 d) 3)(Phyaical tests for insulation : Shrinkage )	-	1300	NA
18.1 d) 3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	NA
18.1 d) 3)(Phyaical tests for Sheath : Shrinkage )	-	1300	NA
18.1 d) 3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	NA
18.1 d) 4)(Hot deformation : Insulation )	-	1900	NA
18.1 d) 5)( Loss of mass in air oven- sheath )	-	8600	NA
18.1 d) 6)(Heat shock test- Insulation )	-	1300	NA
18.1 d) 6)(Heat shock test- sheath )	-	1300	NA
18.1 d) 7)(Thermal stability- insulation )	-	1900	NA
18.1 d) 8)(Water absorption (gravimetric)(for insulation, where applicable))	-	10300	NA
18.1 e)(Insulation resistance test : Volume Resistivity )	-	2700	NA
18.1 e)(Insulation resistance test : IR Constant )	-	0	NA
19.2(Partial discharge test)	-	10500	10500 for 3 core 5250 for 1 core
19.3(Bending test)	-	3150	3150 for 3 core 2100 for 1 core
19.4(Dielectric power factor test)	-	10500	10500 for 3 core 5250 for 1 core
19.4(Dielectric power factor test)	-	12600	12600 for 3 core 8400 for 1 core
19.5(Heating cycle test)	-	8400	NA
19.6(Impulse withstand test)	-	36750	36750 above 11 kV 27300 up to 11 kV
19.7(High voltage test)	-	6300	6300 for 3 core 3150 for 1 core
19.8(Flammability test)	-	1500	NA
19.9(Oxygen Index Test)	-	3750	NA
19.10(Flame Retardance Test on Single Cables)	-	7500	NA
19.11(Flame Retardance Test on Bunched Cables)	-	10000	NA
19.13(Test for Halogen Acid Gas Evolution)	-	5000	NA
19.14(Temperature Index)	-	6250	Na

Complete

30 Nov, 2025

-
-

143

IS 6595 : Part 2 (1993)

Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply) - Specification (Second Revision)

Voltage: upto 440V, Power upto 110 kW, Size: 5''

15985 View breakup
Upto 5.5 kW : Rs. 6,000/-; 5.51 to 11 kW : Rs. 6,700/- ; 11.1 to 22 kW : Rs. 7,200/-; 22.1 to 45 kW : Rs. 8,645/-; 45.1 to 75 kW : Rs. 12,650/-; 75.1 to 110 kW : Rs. 15,985/- ; Installation charges will be Rs. 3000/- Extra.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Direction of Rotation)	-	690	Nil
8.1(Design Limitations)	-	0	Nil
9.1(General Requirements)	-	2530	Nil
10.1(Pump test, tolerances, and verification of guarantee on Pump Performance)	-	9200	Nil
10.4(Hydrostatic Test)	-	2875	Nil
7.2(Direction of Rotation)	-	690	Nil
9.2(General Requirements)	-	0	Nil
9.3(General Requirements Shaft)	-	0	Nil
9.4(General Requirements)	-	0	Nil
9.5(General Requirements)	-	0	Nil
9.6(General Requirements)	-	0	Nil
9.7(General Requirements)	-	0	Nil
8.2(Design Limitations Suction Limitations)	-	0	Nil
8.2(Design Limitations Suction Limitations)	-	0	Nil
8.3(Design Limitations)	-	0	Nil
6.1(Observation)	-	2530	NA
14(Observation)	-	690	NA

Complete

30 Nov, 2025

-
-

144

IS 7538 (1996)

Three - Phase squirrel cage induction motors for centrifugal pumps for agricultural application - Specification (First Revision)

Up to 110 kW 2 & 4 pole, 90 kW 6 pole, 75 kW 8 pole

119071 View breakup
Up to 5.5kW : Rs. 10,820/- ; 5.5kW to 11kW : Rs. 12,160/- ; 11kW to 22kW : Rs. 20,126/- ; 22.1kW to 45kW : 39,300/- ; 45.1kW to 75kW : Rs. 59,950/- ; 75.1kW to 110kW : Rs. 1,19,071/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.1( MARKING)	-	1000	NA
11(PROVISION FOR EARTHING)	-	1000	NA
22.3.1 b)(Measurement of stator resistance)	-	1200	NA
24.1(No-load running of motor and reading of ' voltage)	-	2000	NA
24.1(No-load running of motor and reading of ' current )	-	2000	NA
24.1(No-load running of motor and reading of ' power input )	-	2000	NA
24.1(No-load running of motor and reading of ' speed )	-	2000	NA
24.2(Reduced Voltage Running Up Test)	-	1500	NA
24.4(Full Load Test : voltage)	-	10000	NA
24.4(Full Load Test : Power input )	-	10000	NA
24.4(Full Load Test : current )	-	10000	NA
24.4(Full Load Test : speed)	-	10000	NA
24.5(Test for efficiency at reduced load)	-	10000	NA
13.1(OVERLOAD:Momentary Excess Torque)	-	4000	NA
23.1(TEMPERATURE-RISE TEST : Test at Rated Voltage)	-	14000	NA
23.2(TEMPERATURE-RISE TEST: Test at Reduced Voltage)	-	14000	NA
24.3(Locked Rotor Test:The readings of the input current)	-	4500	NA
24.3(Locked Rotor Test:The readings of the input power)	-	4500	NA
24.3(Locked Rotor Test:The readings of the breakaway rotor torque)	-	4500	NA
25(HIGH-VOLTAGE TEST)	-	800	NA
26(INSULATION-RESISTANCE TEST)	-	800	NA
15(LIMITS OF VIBRATION SEVERITY)	-	6000	NA
9(DIMENSIONS- H : Nominal )	-	5000	NA
9(DIMENSIONS- H : Deviation )	-	5000	NA
9(DIMENSIONS- A)	-	5000	NA
9(DIMENSIONS- B)	-	5000	NA
9(DIMENSIONS- C)	-	5000	NA
9(DIMENSIONS- K+ : Nominal )	-	5000	NA
9(DIMENSIONS- K+ : Tolerance )	-	5000	NA
9(DIMENSIONS- Bolt or Screw)	-	5000	NA
9(DIMENSIONS- M)	-	5000	NA
9(DIMENSIONS- N)	-	5000	NA
9(DIMENSIONS- P)	-	5000	NA
9(DIMENSIONS- S)	-	5000	NA
9(DIMENSIONS- T)	-	5000	NA
9(DIMENSIONS- LA)	-	5000	NA
9(DIMENSIONS- Depth of tapped Hole)	-	5000	NA
27(OVERSPEED TEST)	-	4000	NA
19.1.1(TERMINAL MARKINGS)	-	1000	NA
5(ENCLOSURES)	-	38271	NA

Complete

30 Nov, 2025

-
-

145

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

Up to 100 µF

478760 View breakup
Type Tests : for Class A : Rs. 4,78,760/-, for Class B : Rs. 2,28,760/-, for Class C : Rs. 1,78,760/-, for Class D : Rs. 1,28,760/-, Routine Test for one capacitor: Rs. 11,177/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.9(Capacitance measurement)	-	3000	RS.
2.1(Check of dimensions)	-	720	RS.
2.14(Damping heat test)	-	12000	RS.
2.16.3(Destruction test : Test procedure)	-	30000	RS.
2.13(Endurance test)	-	380000	30,000/- for Class D, 80,000/- for Class C, 1,30,000/- for Class B, 3,80,000/- for Class A
2.5(Tangent of loss angle)	-	3000	RS.
2.12(Sealing Test)	-	1800	RS.
2.15(Self-healing test (if applicable))	-	3000	RS.
2.6(Visual Examination)	-	720	RS.
5.1(Check marking)	-	720	RS.
2.7(Voltage test between terminals)	-	1200	RS.
2.8(Voltage test between terminals and case)	-	1200	RS.
2.11.1.1(Tensile)	-	1960	RS.
2.11.1.2(Bending (half cf the terminations))	-	1960	RS.
2.11 .1.3(Torsion (other half of the terminations))	-	1960	RS.
2.11.1.4(Torque (screw terminals))	-	1960	RS.
2.11.3(Vibration)	-	25880	RS.
2.11.2(Soldering)	-	2150	RS.

Complete

30 Nov, 2025

-
-

146

IS 8309 (1993)

Compression type tubular terminal ends for aluminium conductors of insulated cables - Specification (First Revision)

3740 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Finish, IS 8309)	-	170	Complete test charges - 3740/-
5(Dimensions, IS 8309)	-	300	Complete test charges - 3740/-
8.2(Flattening Test, IS 8309)	-	630	Complete test charges - 3740/-
8.3(Electrical Conductivity Test, IS 8309)	-	340	Complete test charges - 3740/-

Complete

30 Nov, 2025

-
0.0

147

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

178960 View breakup
Rs. 1,59,880/- [560 to 690 sq. mm.] & Rs. 1,78,960/- [520 sq. mm.]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Mass of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Uniformity of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.10 (elec)(Surface condition test)	-	14490	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.11 (elec)(Corona Test)	-	19200	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.12 (elec)(Radio Interference Voltage Test)	-	42000	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
10.4 (mech)(Direction of lay)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	----
13.9 (elec)(The test of galvanising)	-	1210	170/- per wire 1210/- for 7 wires
8.2.1 (elec)(Size of complete conductor)	-	125	--
8.2.2 (elec)(Resistance of complete conductor)	-	5200	--

Complete

30 Nov, 2025

-
-

148

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

73250 View breakup
Rs. 6,585/- [15 sq. mm.], Rs. 11,105/-[22, 34, 55, 80 & 100 sq. mm.], Rs. 25,040/-[125,148,173, 200 & 232 sq. mm], Rs. 45,755/-[288, 346, 400 & 465 sq. mm.], Rs. 73,250/- [525, 570, 604, 642, 695 & 767 sq. mm.]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.1 Table-1(Dimensional measurement of wires)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.3(Direction of Lay)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.2 Table 3(Lay Ratio of stranded conductors)	-	250	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.4 Table 1(Resistance of Aluminium wire)	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.

Complete

30 Nov, 2025

-
-

149

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

166060 View breakup
Rs. 14,605/-[10, 18, 30, 50 & 80 sq. mm], Rs. 88,990/-[100 sq. mm], Rs. 1,27,525/-[150 & 200 sq. mm], Rs. 1,46,980/- [400 & 560 sq. mm.] & Rs. 1,66,060/- [420 & 520 sq. mm.]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (mech)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Mass of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Uniformity of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.9 (elec)(Surface condition test)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.10 (elec)(Ultimate breaking load)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.11 (elec)(Stress-strain test)	-	48300	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.

Complete

30 Nov, 2025

-
-

150

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

33780 View breakup
Rs. 14,325/- [25, 50 & 100 sq. mm] & Rs. 33,780/-[150, 240 & 300 sq. mm]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load before stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load after stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.5, Table 1(Resistance test)	-	520	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.6, Table 3(Measurement of lay ratio)	-	250	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.4(Wrapping test)	-	460	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
6(Freedom from defects)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
9.3(Stranding)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm

Complete

30 Nov, 2025

-
0.0

Bureau of Indian Standards

The National Standards Body of India

Electrical Research and Development Association, gujarat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940719 uday.puntambekar@erda.org

Scope List