BIS - LIMS (Laboratory Information Management System)

Electrical Research and Development Association (ERDA), Vadodara, Gujarat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940719 nirav.taunk@erda.org

Scope List

Reset

163 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Adapter for household and similar electrical appliances

63500 View breakup
Rs. 63,500/- (excluding ESD, RF, Trasient Brust, Voltage surges, Injected current, voltage dips and iterruptions & Mains signals)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	Total test charges for cl. no. 7 is Rs. 1000/-
8.1.1(Protection against live parts in all positions)	-	1500	Total test charges for cl. no. 8 is Rs. 1500/-
8.1.2(Protection against live parts in openings)	-	0	Total test charges for cl. no. 8 is Rs. 1500/-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Total test charges for cl. no. 8 is Rs. 1500/-
8.1.4(Protection against live parts against protective impedance)	-	0	Total test charges for cl. no. 8 is Rs. 1500/-
9(Starting of motor operation test requirements and tests)	-	0	---
10.1(Power input)	-	2000	Total test charges for cl. no. 10 is Rs. 2000/-
10.2(Current input)	-	0	Total test charges for cl. no. 10 is Rs. 2000/-
11.1(General)	-	5000	Total test charges for cl. no. 11 is Rs. 5000/-
11.2(General)	-	0	Total test charges for cl. no. 11 is Rs. 5000/-
11.3(Heating)	-	0	Total test charges for cl. no. 11 is Rs. 5000/-
13.1(General)	-	1500	Total test charges for cl. no. 13 is Rs. 1500/-
13.2(Leakage current at operating temperature)	-	0	Total test charges for cl. no. 13 is Rs. 1500/-
13.3(Electric Strength at operating temperature)	-	0	Total test charges for cl. no. 13 is Rs. 1500/-
14(Transient Over Voltages)	-	10000	Total test charges for cl. no. 14 is Rs. 10000/-
15.0(General)	-	5000	Total test charges for cl. no. 15 is Rs. 5000/-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Total test charges for cl. no. 15 is Rs. 5000/-
15.2(Spillage Test)	-	0	Total test charges for cl. no. 15 is Rs. 5000/-
15.3(Humidity Test)	-	0	Total test charges for cl. no. 15 is Rs. 5000/-
16.0(General)	-	1500	Total test charges for cl. no. 16 is Rs. 1500/-
16.1(General)	-	0	Total test charges for cl. no. 16 is Rs. 1500/-
16.2(Leakage Current (after Clause 15))	-	0	Total test charges for cl. no. 16 is Rs. 1500/-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Total test charges for cl. no. 16 is Rs. 1500/-
17(Over Load Protection of Transformers and associated circuits)	-	2500	Total test charges for cl. no. 17 is Rs. 2500/-
18(Endurance Test requirements and tests)	-	0	---
19(Abnormal Operation)	-	5000	For appliance without electronic circuit : Rs. 5000/-
20(Stability test)	-	1000	Total test charges for cl. no. 20 is Rs. 1000/-
21(Mechanical Strength Test)	-	2500	Total test charges for cl. no. 21 is Rs. 2500/-
22(Construction verification related test)	-	2500	Total test charges for cl. no. 22 is Rs. 2500/-
23(General)	-	2000	Total test charges for cl. no. 23 is Rs. 2000/-
24(Components)	-	5000	Total test charges for cl. no. 24 is Rs. 5000/-
25(Supply connection and external flexible cords)	-	2000	Total test charges for cl. no. 25 is Rs. 2000/-
26(Terminals for external conductors)	-	1000	Total test charges for cl. no. 26 is Rs. 1000/-
27(Provision for earthing)	-	1500	Total test charges for cl. no. 27 is Rs. 1500/-
28(Screw test and connections)	-	1000	Total test charges for cl. no. 28 is Rs. 1000/-
29(clearance, creepage distances and solid insulation)	-	3000	Total test charges for cl. no. 29 is Rs. 3000/-
30.1(Ball pressure test)	-	5000	Total test charges for cl. no. 30 is Rs. 5000/-
30.2(Glow Wire Test)	-	0	Total test charges for cl. no. 30 is Rs. 5000/-
30.2(Needle Flame Test)	-	0	Total test charges for cl. no. 30 is Rs. 5000/-
31(Resistance to Rusting)	-	1000	Total test charges for cl. no. 31 is Rs. 1000/-
32(Radiation Toxicity and Similar Hazards)	-	1000	Total test charges for cl. no. 32 is Rs. 1000/-
16(Leakage current and electric strength)	-	0	Total test charges for cl. no. 16 is Rs. 1500/-
8.1.5(Live parts of built-in appliances)	-	0	Total test charges for cl. no. 8 is Rs. 1500/-
11.4(Heating appliances)	-	0	Total test charges for cl. no. 11 is Rs. 5000/-
11.5(Motor-operated appliances)	-	0	Total test charges for cl. no. 11 is Rs. 5000/-
11.6(Combined appliances)	-	0	Total test charges for cl. no. 11 is Rs. 5000/-
11.7(Duration corresponding)	-	0	Total test charges for cl. no. 11 is Rs. 5000/-
11.8(Temperature rise)	-	0	Total test charges for cl. no. 11 is Rs. 5000/-
19.11.4.1(Electrostatic discharges)	-	0	---
19.11.4.2(Radiated fields)	-	0	---
19.11.4.3(Fast transient bursts)	-	0	---
19.11.4.4(Surge immunity test)	-	0	---
19.11.4.5(Immunity to conducted discharges)	-	0	---
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	---
19.11.4.7(Harmonics)	-	0	---

30 Nov, 2028

-
Exclude Cl. No. 19.11.4.7 as per IS 302-1 Harmonics. "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

IS 13730 : Part 45 (1999)

Specifications for particular types of winding wires: Part 45 polyester enamelled round copper wire, class 130

834250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	500	-
4(Dimension - Conductor diameter)	-	500	-
1(Dimension - Overall Diameter)	-	500	-
4(Dimension - Out of roundness)	-	500	-
4(Dimension - Out of roundness)	-	500	-
4(Dimension - Minimum increase in diameter)	-	500	-
5(Electrical Resistance)	-	600	-
6(Elongation Test)	-	600	-
7(Springiness Test)	-	500	-
8(Flexibility and adherence - Mandrel winding test)	-	900	-
8(Flexibility and adherence - Jerk Test)	-	900	-
8(Flexibility and adherence - Peel Test)	-	900	-
8(Flexibility and adherence - Stretching Test)	-	900	-
9(Heat Shock Test)	-	800	-
10(Cut through Test)	-	850	-
11(Resistance to abrasion)	-	850	-
12(Resistance to solvents)	-	850	-
13(Breakdown voltage test)	-	1800	-
14(Continuity of Insulation)	-	650	-
15(Temperature Index)	-	821600	-

30 Nov, 2028

-
-

IS 13730 : Part 13 (2014)

Specifications for particular types of winding wires: Part 13 polyester or polyesterimide overcoated with polyamide - Imide enamelled round copper wire, class 200 (First Revision)

834350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Nominal Conductor diameter)	-	500	NA
4(Conductor tollerance )	-	500	NA
4(Minimum increase due to the insulation)	-	500	NA
4(Maximum overall diameter)	-	500	NA
5(Electrical resistance)	-	600	NA
6(Elongation)	-	600	NA
7(Springiness)	-	500	NA
8(Flexibility and adherence)	-	850	NA
8(Stretching test (nominal conductor diameters over 1,600 mm))	-	850	NA
8(Jerk test (nominal conductor diameters up to and including 1,000 mm))	-	850	NA
8(Peel test (nominal conductor diameters over 1,000 mm))	-	850	NA
9( Heat shock)	-	600	NA
10( Cut-through)	-	800	NA
11(Resistance to abrasion :Minimum average force to failure )	-	800	NA
11(Resistance to abrasion :Minimum force to failure of each measurement )	-	800	NA
12(Resistance to solvents)	-	650	NA
13(Breakdown voltage )	-	1450	NA
14(Continuity of insulation )	-	550	NA
15(Temperature index)	-	821600	NA
16(Resistance to refrigerants)	-	7000	NA

30 Nov, 2028

-
-

IS 13730 : Part 3 (2012)

Specifications for particular types of winding wires: Part 3 polyester enamelled round copper wire, class 155 (First Revision)

885100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Nominal Conductor diameter)	-	500	NA
4(Conductor tollerance )	-	500	NA
4(Minimum increase due to the insulation)	-	500	NA
4(Maximum overall diameter)	-	500	NA
5(Electrical resistance)	-	600	NA
6(Elongation)	-	600	NA
7(Springiness)	-	500	NA
8(Flexibility and adherence)	-	850	NA
8(Stretching test (nominal conductor diameters over 1,600 mm))	-	850	NA
8(Jerk test (nominal conductor diameters up to and including 1,000 mm))	-	850	NA
8(Peel test (nominal conductor diameters over 1,000 mm))	-	850	NA
9( Heat shock)	-	600	NA
10( Cut-through)	-	800	NA
11(Resistance to abrasion :Minimum average force to failure )	-	800	NA
11(Resistance to abrasion :Minimum force to failure of each measurement )	-	800	NA
12(Resistance to solvents)	-	650	NA
13(Breakdown voltage )	-	1450	NA
14(Continuity of insulation )	-	550	NA
15(Temperature index)	-	821600	NA

30 Nov, 2028

-
-

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

101962 View breakup
Rs. 1,01,962/- (For complete tests) (One rating : Seq I Rs. 14,121/- ; Seq II Rs. 25,811/- ; Seq III Rs. 16,899/- ; Seq IV Rs. 31,216/- ; Seq V Rs. 10,264/- ; Seq VI Rs. 3,651/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1( Marking : General )	-	500	Not Applicable
5.2.1( Marking : General )	-	500	Not Applicable
5.2.1( Marking : General )	-	500	Not Applicable
5.2.1( Marking : General )	-	500	Not Applicable
5.2.1( Marking : General )	-	500	Not Applicable
5.2.2(Terminal identification and marking)	-	500	Not Applicable
5.2.3(Functional markings )	-	500	Not Applicable
5.2.4(Emergency stop)	-	500	Not Applicable
5.2.5(Operating diagram)	-	500	Not Applicable
5.2.5.1( Position indication )	-	500	Not Applicable
5.2.5.2( Terminal markings for operating diagrams)	-	500	Not Applicable
5.2.6(Time delay markings)	-	500	Not Applicable
5.3(Instructions for installation, operation and maintenance)	-	500	Not Applicable
5.4(Additional information)	-	500	Not Applicable
8.3.3.2(Operating limits of contactor relays )	-	500	Not Applicable
8.3.3.3(Temperature rise )	-	3306	Not Applicable
8.3.3.4(Dielectric properties)	-	10286	Not Applicable
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	15525	Not Applicable
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	6613	Not Applicable
8.3.3.5.5 b)(Dielectric verification)	-	500	Not Applicable
8.3.4.1(Performance under conditional short-circuit current)	-	20930	Not Applicable
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	20930	Not Applicable
8.3.4.3(Test circuit and test quantities)	-	20930	Not Applicable
8.3.4.4 a)(Condition of the switching element after the test )	-	500	Not Applicable
8.3.4.4 b)(Condition of the switching element after the test )	-	500	Not Applicable
8.3.3.5.5 b)(Dielectric verification)	-	500	Not Applicable
8.2.5(Verification of actuation force or moment)	-	3042	Not Applicable
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	661	Not Applicable
8.2.6( Verification of limitation of rotation of a rotary switch)	-	2990	Not Applicable
8.2.6( Verification of limitation of rotation of a rotary switch)	-	2990	Not Applicable
8.2.6( Verification of limitation of rotation of a rotary switch)	-	3042	Not Applicable
8.1.5(Special tests)	-	500	Not Applicable
Annex C(No. of operations)	-	23288	For 10000 mechanical operations and 120 operating sequence per hour
C.1.2(Observation)	-	7763	For 10000 operations and 120 operating sequence per hour
C.2(Mechanical durability)	-	7763	For 10000 operations and 120 operating sequence per hour
C.3(Electrical durability)	-	15525	Not Applicable

30 Nov, 2028

-
-

IS/IEC 60947 : PART 3 (2012)

Low - Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse - Combination units (First Revision)

211308 View breakup
Rs. 2,11,308/- (For complete tests except extra tests) [One rating : Seq I Rs. 71,926/- ; Seq II Rs. 52,319/- ; Seq III Rs. 1,30,519/- ; Seq IV Rs. 1,30,519/- ; Seq V Rs. 20,838/- ; Routine tests : Rs. 1,161/-; Other tests Rs. 62,100/-] ; Extra tests Rs. 1,61,505/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.1(Temperature-rise)	-	9919	Not Applicable
8.3.3.1(Temperature-rise)	-	9919	Not Applicable
8.3.3.1(Temperature-rise)	-	9919	Not Applicable
8.3.3.1(Temperature-rise)	-	9919	Not Applicable
8.3.3.1(Temperature-rise)	-	9919	Not Applicable
8.3.3.3.5(Behaviour of equipment during making and breaking capacity tests)	-	40250	Not Applicable
8.3.3.3.6(Condition of equipment after the making and breaking capacity tests)	-	40250	Not Applicable
8.3.3.4(Dielectric verification)	-	500	Not Applicable
8.3.3.2(Test of dielectric properties)	-	9711	Not Applicable
8.3.3.2(Test of dielectric properties)	-	9711	Not Applicable
8.3.3.2(Test of dielectric properties)	-	9711	Not Applicable
8.3.3.2(Test of dielectric properties)	-	9711	Not Applicable
8.3.3.5(Leakage current)	-	500	Not Applicable
8.3.3.6(Temperature-rise verification)	-	9919	Not Applicable
8.3.3.6(Temperature-rise verification)	-	9919	Not Applicable
8.3.3.6(Temperature-rise verification)	-	9919	Not Applicable
8.3.5.5(Temperature-rise verification)	-	9919	Not Applicable
8.3.3.7(Strength of actuator mechanism)	-	1127	Not Applicable
8.3.3.7(Strength of actuator mechanism)	-	1127	Not Applicable
8.3.4.1.5(Operational performance test)	-	41400	Not Applicable
8.3.4.1.6(Operational performance test)	-	41400	Not Applicable
8.3.4.2(Dielectric verification)	-	500	Not Applicable
8.3.4.3(Leakage current)	-	500	Not Applicable
8.3.4.4(Temperature-rise verification)	-	9919	Not Applicable
8.3.7.1(Overload test)	-	9919	Not Applicable
8.1.3.2(Mechanical operation test)	-	661	Not Applicable
8.1.3.3(Dielectric test)	-	500	Not Applicable
8.5.1(Mechanical durability)	-	20700	For 10000 operation & 120 operating cycles per hour
8.5.2(Electrical durability)	-	41400	41400/- For 1000A to 10 kA 16848/- For 600A to 1000A 14548/- For 320A to 600A 13225/- For 200A to 320A 11903/- For Up to 200A
8.3.5.1( Short-time withstand current test)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
8.3.5.2(Short-circuit making capacity test)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
8.3.6.2, 1 a)(Fuse protected short-circuit withstand)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
8.3.6.2, 1 a)(Fuse protected short-circuit withstand)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
8.3.6.3(Dielectric verification)	-	500	Not Applicable
8.3.6.4(Leakage current)	-	500	Not Applicable
8.3.6.5(Temperature-rise verification)	-	9919	3306/- Up to 200 A 6613/- Above 200 A to 1000 A 9919/- Above 1000 A to 2000 A

30 Nov, 2028

-
-

IS 12640 : Part 2 (2016)

Residual current operated circuit - Breakers with integral overcurrent protection for household and similar uses (Rcbos): Part 2 general rules

450834 View breakup
One rating: Seq A Rs. 10,574/-, Seq A2 Rs. 9,660/-, Seq B Rs. 99,515/-, Seq C1 Rs. 61,450/-, Seq C2 Rs. 42,015/-, Seq D0 Rs. 12,938/-, Seq D1 Rs. 77,455/-, Seq E0 Rs. 7,188/-, Seq E1 Rs. 49,105/-, Seq F0 Rs. 51,865/-, Seq F1 Rs. 51,865/-, Seq G Rs. 47,150/- ; For single Phase(EMC): Seq H Rs. 36,000/-, Seq I Rs. 99,300/-, Seq J Rs. 10,500/- ; For three Phase(EMC): Seq H Rs. 51,000/-, Seq I Rs. 1,02,300/-, Seq J Rs. 11,400/- ; Routine Tests Rs. 6,670/- . Seq J conducted common mode disturbances in the frequency range lower than 150 kHz - One rating for single phase (EMC) Seq J Rs. 35,000/-, for three phase (EMC) Seq J Rs. 35,000/-. Rs. 6670/- for Routine test (for DP & SP).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3(Clearances and creepage distances (internal parts))	-	750	NIL
Cl. No. 9.15 & 4 to 10 of IEC : 60695-2-1(Resistance to abnormal heat and to fire)	-	3220	NIL
9.7.1(Resistance to humidity)	-	4410	NIL
9.7.2(Insulation resistance of main circuit)	-	4410	NIL
9.7.3 a)(Dielectric strength of the main circuit)	-	4410	NIL
9.9.1.2 c)(Verification of the correct operation in case of sudden appearance of residual current)	-	19550	NIL
9.8(Test of temperature-rise )	-	3680	NIL
9.2(Verification of resistance of the insulation against an impulse voltage)	-	2875	NIL
9.22.2(Test with temperature of 40 ºC)	-	81650	NIL
9.1(Verification of mechanical and electrical endurance)	-	14950	NIL
9.7.2(Insulation resistance of main circuit)	-	4410	NIL
9.7.2(Insulation resistance of main circuit)	-	4410	NIL
9.7.3 b)(Dielectric strength of the main circuit)	-	4410	NIL
9.7.3 c)(Dielectric strength of the main circuit)	-	4410	NIL
9.10.3(Condition of the RCBO after the test.)	-	4485	NIL
9.9.1.2(Verification of the operating characteristic under residual current conditions)	-	19550	NIL
9.9.1.2(Off-load tests with residual sinusoidal alternating currents at the reference temperature of 20 °C ± 5 °C)	-	19550	NIL
9.9.1.3(Verification of the correct operation with load at the reference temperature)	-	19550	NIL
9.9.1.4(Tests at the temperature limits)	-	19550	NIL
9.19.1(Current surge test for all RCBOs (0,5 µs/100 kHz ring wave test))	-	13225	NIL
9.19.2(Verification of behavior at surge currents up to 3000A (8/20µs surge current test))	-	13225	NIL
9.16(Verification of the operation of the test device at the limits of rated voltage )	-	2185	NIL
9.16(Verification of the operation of the test device at the limits of rated voltage )	-	2185	NIL
9.19.1(Current surge test for all RCBOs (0,5 µs/100 kHz ring wave test)	-	13225	NIL
9.19.1(Current surge test for all RCBOs (0,5 µs/100 kHz ring wave test)	-	13225	NIL
9.19.2(Verification of behavior at surge currents up to 3000A (8/20µs surge current test))	-	13225	NIL
Cl. No. 9.11.2.1 i)(Condition of the RCBO after test)	-	11615	NIL
9.16 a)(Verification of the operation of the test device at the limits of rated voltage)	-	2185	NIL
9.16 b)(Verification of the operation of the test device at the limits of rated voltage)	-	2185	NIL
9.9.2.1 a)(Test of time-(over)current characteristic)	-	14720	NIL
9.9.2.1 b)(Test of time-(over)current characteristic)	-	14720	NIL
9.9.2.2(Test of instantaneous tripping)	-	14720	NIL
9.9.2.2(Test of instantaneous tripping)	-	14720	NIL
9.9.2.2(Test of instantaneous tripping)	-	14720	NIL
9.9.2.3 a)(Test of effect of ambient temperature on the tripping characteristic)	-	14720	NIL
9.9.2.3 b)(Test of effect of ambient temperature on the tripping characteristic)	-	14720	NIL
9.13.1(Verification of resistance to mechanical shock )	-	4370	NIL
9.13.2(Verification of resistance to mechanical impact )	-	4370	NIL
9.24 Annex-A, Test Sequence-H(Surges)	-	51000	For single Phase:Rs 36000/-For three Phase:Rs 51000/-
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	13500	For single Phase:Rs 11700/-For three Phase:Rs 13500/-
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	75000	NIL
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	13800	For single Phase:Rs 12600/-For three Phase:Rs 13800/-
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	11400	For single Phase:Rs 10500/-For three Phase:Rs 11400/-
9.3(Indelebility of marking)	-	500	NIL
9.4(Reliability of screws, current-carrying parts and connections)	-	500	NIL
9.5(Test of reliability of screw-type terminals for external)	-	500	NIL
9.6(Protection against electric shock)	-	702	NIL
9.14(Resistance to heat)	-	1725	NIL
9.21(DC components)	-	12075	NIL
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	35000	NIL
D.2(Time & current)	-	3220	NIL
D.3(Voltage)	-	1265	NIL
D.4(Observation)	-	2165	NIL

30 Nov, 2028

-
Exclusion: Cl.9.17 (Behaviour in case of failure of the line voltage), Cl. 9.23 (Ageing of electronic components)

IS 12640 : Part 1 (2016)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision)

494646 View breakup
One rating: Seq A1 Rs. 8,171/-, Seq A2 Rs. 9,660/-, Seq B Rs. 1,09,175/-, Seq C Rs. 19,435/-, Seq D0 Rs. 14,950/-, Seq D1 Rs. 87,845/-, Seq D2 Rs. 61,135/-, Seq E Rs. 1,03,730/-, Seq F Rs. 1,03,730/-, Seq G Rs. 52,900/- ; For single Phase(EMC): Seq H Rs. 36,000/-, Seq I Rs. 99,300/-, Seq J Rs. 10,500/- ; For three Phase(EMC): Seq H Rs. 51,000/-, Seq I Rs. 1,02,300/-, Seq J Rs. 11,400/- ; Routine Tests Rs. 6,670/- . Seq J conducted common mode disturbances in the frequency range lower than 150 kHz - One rating for single phase (EMC) Seq J Rs. 35,000/-, for three phase (EMC) Seq J Rs. 35,000/-. Rs. 6670/- for Routine test (for DP & SP).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.11.2.3(VERIFICATION OF PERFORMANCE AT Im)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
6(Marking)	-	500	NIL
8.1.1(General)	-	500	NIL
8.1.1(General)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
8.1.2(Mechanism)	-	500	NIL
9.3(Indelibility of marking)	-	500	NIL
8.1.3 i)(Clearance )	-	650	NIL
8.1.3 (Creepage distances)	-	650	NIL
9.15(Trip-free mechanism)	-	702	NIL
9.15(Trip-free mechanism)	-	702	NIL
9.4(Test of reliability of screws, current carrying parts and connections )	-	500	NIL
9.5(Test of reliability of terminals for external conductors)	-	500	NIL
9.6(Protection against electric shock)	-	500	NIL
9.13(Test of resistance to heat)	-	1750	NIL
8.1.3(Clearances and creepage distances (internal parts) Clearances distances)	-	650	NIL
(Cl. No. 9.14 & 4 to 10 of IEC : 60695-2-10)(Resistance to abnormal heat and to fire )	-	9660	NIL
9.7.1(Dielectric Properties : Resistance to humidity)	-	2910	NIL
9.7.2 (Insulation resistance of main circuit)	-	500	NIL
9.7.7.1(Rated impulse withstand voltage)	-	2875	NIL
9.8(Test of Temperature rise)	-	3680	NIL
9.2(Verification of resistance of the insulation against an impulse voltage)	-	2875	NIL
9.22.2(Testing with temperature of 40)	-	81650	NIL
9.23(Verification of ageing of electronic components )	-	7015	NIL
9.1(Verification of mechanical and electrical endurance)	-	14950	NIL
9.9.1(Verification of the operating characteristic)	-	14950	NIL
9.9.2.2(Verification of the correct operation at closing on residual current )	-	21850	NIL
9.9.2.4(Verification of the correct operation in case of sudden appearance of residual currents of values between 5 IΔn and 500A)	-	21850	NIL
9.9.3(Verification of the correct operation with load at the reference temperature )	-	21850	NIL
9.9.4(Tests at the temperature limits )	-	3680	NIL
9.9.5(Particular test conditions for RCCBs functionally dependent on line voltage)	-	1265	NIL
9.19.1( Verification of behaviour of RCCBs in case of current surges caused by impulse voltages (Current surge test for all RCCBs (0,5 µs/100 kHz ring wave test)))	-	1265	NIL
9.19.2(Verification of behaviour at surge currents up to 3000A (8/20 s surge current test))	-	13225	NIL
9.14(Resistance to abnormal heat and to fire)	-	9660	NIL
9.17(Behaviour in the case of failure of the line voltage)	-	1625	NIL
9.21(DC components)	-	12075	NIL
9.25(Resistance to rusting)	-	1392	NIL
9.7.3(Dielectric strength of the main circuit)	-	500	NIL
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	500	NIL
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	2875	NIL
9.7.5(Secondary circuit of detection transformers)	-	500	NIL
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	500	NIL
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	2875	NIL
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12075	NIL
(9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	32075	Sequence D1 - Rs. 32075/- Sequence D2 - Rs. 32075/-
9.11.2.4 (Verification of the coordination between the RCCB and the SCPD)	-	64150	Sequence E - Rs. 64150/- Sequence F - Rs. 64150/-
9.11.2.1 i)(Leakage current test)	-	500	NIL
9.11.2.1 ii)(Dielectric Strength Test)	-	1100	NIL
9.11.2.2(Performance at Im)	-	64150	Sequence E - Rs. 64150/- Sequence F - Rs. 64150/-
9.11.2.1 i)(CONDITION OF THE RCCB AFTER TESTS )	-	1600	NIL
(9.11.2.4 c)(Coordination at IΔc)	-	64150	Sequence E - Rs. 64150/- Sequence F - Rs. 64150/-
9.24 Annex-A, Test Sequence-H(Surges)	-	51000	For single Phase Rs. 36000/- For Three Phase Rs. 51000/-
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	13500	For single Phase Rs. 11700/- For Three Phase Rs. 13500/-
8.17, 9.24(Test sequence I, (Radiated electromagnetic field))	-	75000	NIL
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	13800	For single phase Rs. 12600/- For three phase Rs. 13800
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	11400	For three phase Rs. 11400 For single phase Rs. 10500
9.18.1(Verification of the limiting value of overcurrent in case of a load through an RCCB with two current paths)	-	7130	NIL
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	35000	NIL
9.16(Voltage)	-	2185	Not Applicable
9.22.1(Observation)	-	52900	Not Applicable
D.2(Time & current)	-	3220	Not Applicable
D.3(Voltage)	-	1265	Not Applicable
D.4(Observation)	-	2185	Not Applicable

30 Nov, 2028

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

114000 View breakup
Rs. 1,14,000/- (for type test) ; Multicore cables: additional charges Rs. 500/- per core per test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(HV (water immersion))	-	9000	-
10.2(HV (room temperature))	-	850	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1300	-
11(Identification)	-	1550	-
5.1(Insulation)	-	1550	-
table 1 e) 3) (IR constant- max. Temp)	-	288	-
table 1 e) 3) (IR constant- Room temp )	-	288	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	288	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	288	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	6000	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	6000	-
9.1(Ovality)	-	1550	-
5.3(Thickness of Insulation)	-	1000	-
8.3(Thickness of Sheath)	-	1000	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	750	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	750	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	750	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	750	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	750	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	6100	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	6100	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	6100	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	6100	-
Table 1 iii) c) 3)(Elongation variation)	-	6100	-
Table 1 iii) c) 3)(TS variation)	-	6100	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	6100	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	6100	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1500	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	1500	-
4.1(Annealing test (for copper))	-	550	-
4.1(Conductor - Material)	-	1550	-
12.0(Core identification)	-	1550	-
4.2(Conductor resistance test)	-	700	-
11.2(Legibility)	-	1550	-
11.1(Durability)	-	1550	-
10.4(Flammability test- Unaffected portion)	-	450	-
10.4(Flammability test-Burning after flame removal)	-	450	-
10.8(Smoke density rating)	-	5500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	2900	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	2900	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	2900	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	2900	-
10.5(Oxygen index)	-	3500	-
10.7(Temperature index)	-	5500	-
10.11(Persulphate Test )	-	1300	-
4.1(Wrapping test (for Al))	-	500	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	750	-
10.6(Halogen evolution)	-	4500	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	9000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1300	-
9(Overall dimensions)	-	1000	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	750	-

30 Nov, 2028

-
-

100

IS 14582 (2021)

Single-phase small ac electric motors for centrifugal pumps for agricultural applications

Voltage: up to 250 V, Power up to: 2.2 kW

24222 View breakup
-

Clause No.	Exclusion	Remark
11(Earthing)	-	Nil
5(Degree of Protection/Type of Enclosures)	-	Nil
6(Methods of cooling)	-	Nil
14(Terminal Marking)	-	Nil
15.1(Marking/Rating plate)	-	Nil
16.2 (b)(No Load Test at Rated Voltage)	-	Nil
12.4(Temperature Rise at reduced Voltage - Temperature)	-	Nil
16.2 (d)(Voltage, Current, Power, Frequency, Torque)	-	Nil
16.2 (f)(Breakaway Starting current at reduced voltage and rated frequency)	-	Nil
16.2 (g)(Temperature Rise Test at Rated Voltage)	-	Nil
16.2 [e]("Full load test/ Load Test/ Determination of Efficiency ")	-	Nil
16.2 (j)(Momentary overload test)	-	Nil
12.5(Insulation Resistance Test)	-	Nil
12.6(High Voltage Test - Voltage)	-	Nil
9(Dimension)	-	Nil
16.2 (a)(Measurement of Stator Resistance)	-	Nil
16.2.d(Locked Rotor Test - Current)	-	Nil
16.2.d(Locked Rotor Test - Torque)	-	Nil

30 Nov, 2028

-
-

101

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

Voltage: up to 250 V, power: up to 10kW

11135 View breakup
Rs. 11,135/- for Motors upto 2.2 kW.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	0	-
11(Methods of cooling)	-	500	-
7.2(Dimensions)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	860	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1350	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	820	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	605	-
12.1.2(Momentary overload for motors)	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
14(Terminal marking)	-	500	-

30 Nov, 2028

-
-

102

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

Rated voltage up to :250 V & Rated current up to :16 A

42620 View breakup
FOR PLUGS: Ordinary- Rs. 27,970/- ; Having insulated sleeves : Rs. 42,620/- ; FOR SOCKET OUTLETS: 3 Pin without shutter : Rs. 27,270/- ; 3 Pin with shutter : Rs. 28,070/- ; Combined without shutter Rs.36,220/- ; Combined with shutter : Rs. 37,020/- . If sample is protection than additional charges are applicable as under in addition to above test charges. IP3X to IP4X: Rs. 850/-, IP5X to IP6X: Rs. 3,300/-, IPX1 to IPX6: Rs. 1,300/-, IPX7 to IPX8: Rs. 2,200/-, IP23: Rs. 2,275/-, IP33, IP34, IP43, IP44, IP53, IP54, IP55, IP56, IP65, IP66 : Rs. 4,600/-, IP67, IP68 : Rs. 5,500/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	500	---
6.1(RATINGS)	-	0	---
6.2(RATINGS)	-	0	---
7(CLASSIFICATION)	-	500	---
7.1(CLASSIFICATION)	-	0	---
7.1.1(Accessories Classification)	-	0	---
7.1.2(Accessories Classification)	-	0	---
7.1.3(Accessories Classification)	-	0	---
7.1.4(Accessories Classification)	-	0	---
7.1.5(Accessories Classification)	-	0	---
7.2(CLASSIFICATION)	-	0	---
7.2.1(Socket-Outlets Classification)	-	0	---
7.2.2(Socket-Outlets Classification)	-	0	---
7.2.3(Socket-Outlets Classification)	-	0	---
7.2.4(Socket-Outlets Classification)	-	0	---
7.3(Plug Classification)	-	0	---
8(MARKING)	-	500	---
8.1(MARKING)	-	0	---
8.2(MARKING)	-	0	---
8.3(MARKING)	-	0	---
8.4(Marking)	-	0	---
8.5(Marking)	-	0	---
8.6(MARKING)	-	0	---
8.7(MARKING)	-	0	---
8.8(MARKING)	-	0	---
8.9(MARKING)	-	0	---
9(CHECKING OF DIMENSIONS)	-	500	---
9.1(CHECKING OF DIMENSIONS)	-	0	---
9.2(CHECKING OF DIMENSIONS)	-	0	---
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	---
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
11(PROVISION FOR EARTHING)	-	500	---
11.1(PROVISIONS FOR EARTHING)	-	0	---
11.2(PROVISIONS FOR EARTHING)	-	0	---
11.3(PROVISIONS FOR EARTHING)	-	0	---
11.4(PROVISIONS FOR EARTHING)	-	0	---
11.5(PROVISIONS FOR EARTHING)	-	0	---
11.6(PROVISIONS FOR EARTHING)	-	0	---
12(TERMINALS)	-	3600	For screw type terminals: Rs. 500/- For screw less terminal Rs: 1800/- For screw less terminal Rs: 3600/- (Combined Socket-outlets)
12.1(TERMINALS)	-	0	---
12.1.1(TERMINALS)	-	0	---
12.1.2(TERMINALS)	-	0	---
12.2(TERMINALS)	-	0	---
12.2.1(TERMINALS)	-	0	---
12.2.2(TERMINALS)	-	0	---
12.2.3(TERMINALS)	-	0	---
12.2.4(TERMINALS)	-	0	---
12.2.5(TERMINALS)	-	0	---
12.2.6(TERMINALS)	-	0	---
12.2.7(TERMINALS)	-	0	---
12.2.8(TERMINALS)	-	0	---
12.2.9(TERMINALS)	-	0	---
12.2.10(TERMINALS)	-	0	---
12.2.11(TERMINALS)	-	0	---
12.3(TERMINALS)	-	0	---
12.3.1(TERMINALS)	-	0	---
12.3.2(TERMINALS)	-	0	---
12.3.3(TERMINALS)	-	0	---
12.3.4(TERMINALS)	-	0	---
12.3.5(TERMINALS)	-	0	---
12.3.6(TERMINALS)	-	0	---
12.3.7(TERMINALS)	-	0	---
12.3.8(TERMINALS)	-	0	---
12.3.9(TERMINALS)	-	0	---
12.3.10(TERMINALS)	-	0	---
12.3.11 (a)(TERMINALS)	-	0	---
12.3.11 (b)(TERMINALS)	-	0	---
12.3.12(TERMINALS)	-	0	---
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	500	---
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	---
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	500	---
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
15(INTERLOCKED SOCKET-OUTLETS)	-	0	---
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	3350	If sample is marked IP protection than additional charges are applicable as under in addition to above test charges : IP3X to IP4X: 850, IP5X to IP6X: 3300, IPX1 to IP X6 :1300 IPX7 to IPX8: 2200
16.1(RESISTANCE TO AGEING,)	-	0	---
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	---
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	5500	If sample is marked IP protection than additional charges are applicable as under in addition to above test charges : IP23: 2275 IP33, IP34, IP43, IP44, IP53, IP54, IP55, IP56, IP65, IP66: 4600 IP67, IP68 : 5500
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	---
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	3300	If sample is marked IP protection than additional charges are applicable as under in addition to above test charges : IP3X to IP4X: 850, IP5X to IP6X: 3300, IPX1 to IP X6 :1300 IPX7 to IPX8: 2200
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	---
16.3(Resistance to Humidity)	-	0	---
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	---
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
18(OPERATION OF EARTHING CONTACTS)	-	500	---
19(TEMPERATURE RISE)	-	1300	TEMPERATURE RISE -- SINGLE SOCKET-OUTLETS : RS. 650/- TEMPERATURE RISE --COMBINED SOCKET-OUTLETS : RS. 1300/- TEMPERATURE RISE -- PLUG: RS. 650/-
19.1(TEMPERATURE RISE)	-	0	---
19.2(TEMPERATURE RISE)	-	0	---
19.3(TEMPERATURE RISE)	-	0	---
20(BREAKING CAPACITY)	-	3200	MAKING & BREAKING CAPACITY - Single socket-outlets: Rs. 1300/- MAKING & BREAKING CAPACITY - COMBINED SOCKET-OUTLETS: Rs. 3200/- MAKING & BREAKING CAPACITY- PLUGS : Rs. 2700/-
21(NORMAL OPERATION)	-	8200	NORMAL OPERATION -SINGLE SOCKET-OUTLETS: Rs. 4100/- NORMAL OPERATION - COMBINED SOCKET-OUTLETS: Rs. 8200/- NORMAL OPERATION - PLUGS : Rs. 4100/-
21(NORMAL OPERATION)	-	0	---
21(NORMAL OPERATION)	-	0	---
21(NORMAL OPERATION)	-	0	---
22.1(Verification of the Maximum Withdrawal Force)	-	500	---
22.2(Verification of Minimum Withdrawal Force)	-	0	---
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	FLEXIBLE CABLE & THEIR CONNECTION -FOR NON REWIRABLE PLUGS : Rs. 800/-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	3500	MECHANICAL STRENGTH (ORDINARY- SOCKET-OUTLETS): Rs. 900/- MECHANICAL STRENGTH (ORDINARY- SOCKET-OUTLETS- COMBINED): Rs. 1700/- MECHANICAL STRENGTH (ORDINARY- PLUG) : Rs. 1100/- MECHANICAL STRENGTH -PLUG PROVIDED WITH INSULATED SLEEVE : Rs. 3500/-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	---
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	---
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	---
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	---
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	0	---
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	---
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	---
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	---
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	---
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	---
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	---
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	---
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	---
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	0	---
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	0	---
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	0	---
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	---
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	---
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	---
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	---
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	---
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	---
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	---
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	---
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	0	---
24.15(MECHANICAL STRENGTH )	-	0	---
24.16(MECHANICAL STRENGTH )	-	0	---
24.17(MECHANICAL STRENGTH)	-	0	---
24.18(MECHANICAL STRENGTH)	-	0	---
24.19(MECHANICAL STRENGTH)	-	0	---
25(RESISTANCE TO HEAT)	-	500	---
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	---
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	0	---
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	0	---
25.4(RESISTANCE TO HEAT )	-	0	---
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	2500	SCREWS, CURRENT CARRYING PARTS & CONNECTIONS-COMBINED SOCKET-OUTLETS : Rs. 2500/-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	500	---
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	---
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	---
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	---
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	2400	---
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	0	---
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	2070	---
29(RESISTANCE TO RUSTING)	-	500	---
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	750	---
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	5300	---
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1700	---
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	4500	---

30 Nov, 2028

-
REVISED VERSION OF IS 1293:2019 INCLUDED W.E.F. 17-02-2021.

103

IS 16227 : Part 2 (2016)

Instrument transformers: Part 2 additional requirements for current transformers

76480 View breakup
Rs. 76,480/- (for Accuracy test including short circuit test). Up to 6.6kV: 5250/- ; For 6.6kV to 66kV: 5900/- ; For 66-132kV: 7750/- ; For 132kV: 7750/- ; For 220kV: 9450/- NOTE: PER CORE, PER RATIO, PER TAP in case of higher winding charges will increase accordingly.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.6(Test for accuracy)	-	11550	metering LTCT : 2100/- per core per tap per ratio metering above LT to 33kV CT : 2750/- per core per tap per ratio metering above 33 to 132kV CT : 4600/- per core per tap per ratio special protection turn ratio error :1350/ - per core per tap per ratio
7.5.2(Determination of the instrument security factor (FS) of measuring current transformers)	-	3150	per core per tap per ratio
7.3.201(Determination of secondaty winding resistance)	-	630	per core per tap per ratio
7.3.203(Test for rated knee point e.m.f. (Ek) and exciting current at Ek)	-	1050	per core per tap per ratio
7.3.204(Inter-turn overvoltage test)	-	525	per core per tap per ratio
7.2.2(Temperature-rise test)	-	8925	up to 200A : 3150/- above 200A to 1000A : 5250/- above 1000A to 2500A : 8400/- above 2500A to 5000A : 8925/-
7.2.6.203(Test for composite error of class P and PR protective current transformers)	-	3900	per core per tap per ratio
7.2.201(Short time current test)	-	46750	RESIN CAST CT: RS. 14300/- (UP TO 50 KA FOR 1 SEC.) RS. 21175/- (UP TO 31.5 KA FOR 3 SEC.) OIL COOLED CT: RS. 28600/- (UP TO 50 KA FOR 1 SEC.) RS. 46750/- (UP TO 31.5 KA FOR 3 SEC.)

30 Nov, 2028

-
-

104

IS 16227 : Part 1 (2016)

Instrument transformers: Part 1 general requirements

317681 View breakup
Rs. 3,17,681/- (for all tests including IP & Impulse test). For up to 6.6kV : 80560/- ; For 6.6kv to 66kV: 86425/- ; For 66-132kV: 99250/- ; For 132kV : 112675/- ; For 220kV: 135630/- NOTE: PER CORE, PER RATIO, PER TAP in case of higher winding charges will increase accordingly.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3.6(Verification of markings)	-	525	per ratio , per core, per tap
7.3.3(Power-frequency voltage withstand tests between sections)	-	525	per ratio , per core, per tap
7.3.4(Power-frequency voltage withstand tests on secondary terminals)	-	525	per ratio , per core, per tap
7.3.1(Power-frequency voltage withstand tests on primary terminals)	-	11550	2310/- up to 33kV 4725/- up to 33-66kV 5775/- for 66-132kV 11550/- for 132-220kV
7.3.2(Partial discharge measurement)	-	20000	5250/- up to 33kV 7350/- above 33 -up to 66kV 15000/- above 66 -up to 132kV 20000/- above 132kV - up to 220kV
7.2.3(Impulse voltage test on primary terminals)	-	39900	12600/- up to 33 kV 15750/- for 33 - 66 kV 24150/- for 66-132 kV 39900/- for 132-220 kV
7.2.4(Wet test for outdoor type transformers)	-	11500	2310/- up to 33 kV 4725/- for 33-66 kV 5775/- for 66-132 kV 11550/- for 132-220 kV
7.4.3(Measurement of capacitance and dielectric dissipation factor)	-	20000	RS. 9555/- UP TO 66 KV RS. 15000/- FROM 66 TO 132 KV RS. 20000/- FROM 132 TO 220 KV
7.2.7.1(Verification of the IP coding)	-	200000	IP 20: Rs. 12,500 for sample vol. >5000 Ltr. IP 33/34/43/44: Rs. 15,250 for sample vol. >5000 Ltr. IP 53/54/63/64/55/56/65/66: Rs. 15,250 for sample vol. >5000 Ltr. & Rs. 2,00,000 for sample wt. 30-40T IP 67/68: Rs. 14,700 for sample vol. >5000 Ltr.
7.2.7.2(Mechanical impact test)	-	13156	Rs. 13,156

30 Nov, 2028

-
-

105

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

Class 0.2S, 0.5S and 1.0S

311050 View breakup
Rs. 3,11,050/- (For All tests) [ Rs. 1,94,550/- for Type test as per Table 1 with General & Construction, Rs. 1,80,250/- for Type test as per Table 1, Rs. 1,02,000/- for Testing as per Cl. No. 7, 9.3, 9.5 & 10, Rs. 6,500/- for Testing as per Note a & b of Table 1, Rs. 14,000/- for Testing as per Cl. No. 9.3, 9.5 & 10, Rs. 96,000/- for Data Exchange Protocol Test ].

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(General Constructional requirements)	-	3000	-
6.2(Meter case)	-	0	Charges Covered in General Constructional requirements
6.2(Window)	-	0	Charges Covered in General Constructional requirements
6.2(Communication module)	-	0	Charges Covered in General Constructional requirements
6.2.1(Terminals, terminal block and protective earth terminal)	-	0	Charges Covered in General Constructional requirements
6.2.1(Heat Deflection Test)	-	2300	-
6.2.2(Terminal Cover(s))	-	0	Charges Covered in General Constructional requirements
6.2.2(Insulating encased meter)	-	0	Charges Covered in General Constructional requirements
6.3(Clearance and creepage distances)	-	0	Charges Covered in General Constructional requirements
6.6(Display of measured values)	-	2000	-
6.7(Output device)	-	5000	-
6.8(Marking of meters Name plate)	-	2000	-
6.8(BIS Standard Mark)	-	0	Charges Covered in Marking of meters
6.8(Connection diagrams and terminal marking)	-	0	Charges Covered in Marking of meters
6.8.1(Additional information)	-	0	Charges Covered in Marking of meters
6.10.6(Impulse voltage test)	-	7590	-
6.10.6(ac high voltage test)	-	1000	-
6.10.6(Insulation test)	-	1000	-
6.12(Test on limits of error)	-	2200	-
6.12(Test of meter constant)	-	1000	-
6.12(Test of starting condition)	-	1000	-
6.12(Test of no-load condition)	-	1000	-
6.12(Test of ambient temperature influence)	-	965	-
6.12(Test of repeatability of error)	-	3450	-
6.12(Test of influence quantities)	-	1930	Charges for Auxiliary Voltage and Phase of auxiliary supply voltage by 120 deg.
6.12(Voltage Variation)	-	965	-
6.12(Frequency Variation)	-	965	-
6.12(Waveform 10% of 3rd Harmonics)	-	965	-
6.12(Reversed Phase Sequence)	-	965	-
6.12(Voltage Unbalanced)	-	965	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	965	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	965	-
6.12(Magnetic induction of External Origin 0.5mT)	-	965	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	965	-
6.12(Operation of Accessories)	-	1150	-
6.10.1(Test of power consumption)	-	1000	-
6.10.2(Test of influence of supply voltage)	-	2070	-
6.10.3(Test of influence of short time over currents)	-	3450	-
6.10.4(Test of influence of self-heating)	-	1380	-
6.10.5(Test of influence of heating)	-	575	-
6.10.7(Test of immunity to earth/phase fault)	-	965	-
6.11(Radio interference measurement)	-	11550	-
6.11(Fast transient burst test)	-	8325	-
6.11(Test of immunity to electrostatic discharge)	-	6475	-
6.11(Test of immunity to electromagnetic HF field)	-	34650	-
6.11(Surge Immunity test)	-	7500	-
6.9(Dry heat test)	-	2070	-
6.9(Cold test)	-	12280	-
6.9(Damp heat cyclic test)	-	12970	-
6.5(Vibration test)	-	15640	-
6.5(Shock test)	-	11590	-
6.5(Spring hammer test)	-	575	-
6.5(Test of protection against penetration of dust and water)	-	10465	-
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	1500	-
Note b of Table 1(Access and data read test)	-	5000	-
6.4(Test of resistance to heat and fire)	-	5750	-
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	96000	Rs. 60,000/- for Single Port RS. 36,000/- for Two Ports
9.3(Test of Display)	-	2000	-
8, 9.5(Smart Meter Communicability)	-	6000	-
10.0(Smart Meter Functional Requirements)	-	6000	-

30 Nov, 2028

-
-

106

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

Class 1 and 2

625825 View breakup
Rs. 6,03,930/- (For 1 Phase All tests) [Rs. 2,08,830/- for Type test as per Table 1, Rs. 2,23,130/- for Type test as per Table 1 with General & Construction, Rs. 2,09,000/- for Testing as per Cl. No. 7.2 & 10.4, Rs. 14,000/- for Testing as per Cl. No. 10.3, 10.6 & 11, Rs. 60,000/- for Testing as per Cl. No. 7.2 & 10.4 (UC 1), Rs. 96,000/- Data Exchange Protocol Test - Verification up to two Port ]. Rs. 6,25,825/- (For 3 Phase All tests) [ Rs. 2,30,725/- for Type test as per Table 1, Rs. 2,45,025/- for Type test as per Table 1 with General & Construction, Rs. 2,09,000/- for Testing as per Cl. No. 7.2 & 10.4, Rs. 14,000/- for Testing as per Cl. No. 10.3, 10.6 & 11, Rs. 60,000/- for Testing as per Cl. No. 7.2 & 10.4 (UC 1), Rs. 96,000/- Data Exchange Protocol Test - Verification up to two Port ].

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.9.2 of IS 13779(Test for Immunity to Electrostatic Discharge (ESD))	-	0	Not Applicable as Standard Refer IS 15884
12.9.3 of IS 13779(Test for Immunity to EIectromagnetic HF Fields)	-	0	Not Applicable as Standard Refer IS 15884
12.9.4 of IS 13779(FastTransient BurstTest)	-	0	Not Applicable as Standard Refer IS 15884
12.9.5 of IS 13779(Radio Interference Measurement)	-	0	Not Applicable as Standard Refer IS 15884
cl. 12.7.6.2 of IS 13779(Impulse voltage test)	-	7590	-
cl. 12.7.6.3 of IS 13779(ac Voltage test)	-	575	-
cl. 12.7.6.4 of IS 13779(Insulation resistance test)	-	575	-
cl 11.1 of IS 13779(Limits of Error and Interpretation or Test Results)	-	1520	-
12.15 of IS 13779(Test of Meter Constant/Registration)	-	690	-
12.14 of IS 13779(Test of Starting Conditions)	-	690	-
12.13 of IS 13779(Test of No-Load Condition)	-	690	-
12.12 of IS 13779(Test ofAmbient Temperature Influence)	-	965	-
12.17 of IS 13779(Repeatability of Error Test )	-	3450	-
12.11 of IS 13779(Test of Iniluence Quantities)	-	10800	-
12.7.1 of IS 13779(Test of Power Consumption)	-	0	Not Applicable as Standard Refer IS 15884
12.7.2 of IS 13779(Test of Influence of Supply Voltage)	-	0	Not Applicable as Standard Refer IS 15884
12.7.3 of IS 13779( Test of Influence of Short-time Overcurrents)	-	0	Not Applicable as Standard Refer IS 15884
12.7.4 of IS 13779(Test of Influence of Self-Heating)	-	0	Not Applicable as Standard Refer IS 15884
12.7.5 of IS 13779(Test of Influence of Heating)	-	0	Not Applicable as Standard Refer IS 15884
12.8 of IS 13779(TestorImmunity to Earth Fault)	-	965	-
12.6.1 of IS 13779(Dry Heat Test)	-	2070	-
12.6.2 of IS 13779(Cold Test)	-	12280	-
12.6.3 of IS 13779( Damp Heat Cycle Test)	-	12970	-
12.3.1 of IS 13779(Shock Test)	-	11590	-
12.3.3 of IS 13779( Spring Hammer Test)	-	575	-
12.4 of IS 13779(Testof Resistance to Heat and Fire )	-	5750	-
4.4.2.1 of IS 15844(Voltage range)	-	0	Charges Covered in Test of Influence of Supply Voltage
4.4.2.2 of IS 15844( Specified operating range )	-	0	Charges Covered in Test of Influence of Supply Voltage
4.4.2.3 of IS 15844(Extended operating range)	-	0	Charges Covered in Test of Influence of Supply Voltage
4.4.2.4 of IS 15844( Limit range of operation)	-	0	Charges Covered in Test of Influence of Supply Voltage
4.4.2.5 of IS 15844(Withstand range)	-	0	Charges Covered in Test of Influence of Supply Voltage
4.4.2.6 of IS 15844(Abnormal voltage conditions)	-	0	Charges Covered in Test of Influence of Supply Voltage
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	0	Charges Covered in Test of Influence of Supply Voltage
cl. 7.1 a) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 b) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 c) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 d) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 e) of of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 f) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 g) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 h) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 j) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 k) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 m) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 n) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
cl. 7.1 p) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters
6.2.1(Heat Deflection Test)	-	2300	-
12.3.2 of IS 13779(Vibration Test)	-	15640	-
6.5(Vibration test)	-	15640	-
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	3450	-
4.4.4 of IS 15844(Influence of Self-Heating)	-	1380	-
4.4.5 of IS 15844(Influence of Heating)	-	575	-
4.4.6 of IS 15844(Insulation)	-	575	-
6.8(BIS Standard Mark)	-	0	Charges Covered in Marking of smart meters
6.8(Marking of smart meters Name plate)	-	2000	-
6.3(Clearance and creepage distances)	-	0	Charges Covered in General and constructional requirements
11.0(Smart meter functional requirements)	-	6000	-
9, 10.6(Test of Smart Meter Communicability)	-	6000	-
10.3(Test of Display)	-	2000	-
8.0(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (Verification up to two Port))	-	96000	-
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	60000	-
7.2, 10.4(Dielectric strength (G-8))	-	19500	-
7.2, 10.4(Minimum switched current (G-7))	-	9000	-
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	31000	-
7.2, 10.4(Fault current making capacity (G-5))	-	56000	-
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	7500	-
7.2, 10.4(Electrical endurance (G-3))	-	80000	-
7.2, 10.4(Normal operation (G-2))	-	6000	-
6.5(Test of resistance to heat and fire)	-	5750	-
Note 1c of Table 1(Remote disconnect/connect)	-	5000	-
Note 1b of Table 1(Access and data read test)	-	5000	-
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	1500	-
6.5(Spring Hammer test)	-	575	-
6.5(Shock test)	-	11590	-
6.9(Damp heat cyclic test)	-	12970	-
6.9(Cold test)	-	12280	-
6.9(Dry heat test)	-	2070	-
6.11(Test of immunity to electromagnetic HF field)	-	34650	-
6.11(Test of immunity to electrostatic discharge)	-	6600	-
6.11(Fast transient burst test)	-	8325	-
6.11(Radio interference measurement)	-	54250	-
6.10.7(Test of influence of immunity to earth fault)	-	965	-
6.10.5(Test of influence of heating)	-	575	-
6.10.4(Test of influence of self-heating)	-	1380	-
6.10.1(Test of influence of short time over currents)	-	3450	Cl. No. 6.10.3 of IS 16444 Part 1
6.10.1(Test of influence of supply voltage)	-	3870	Cl. No. 6.10.2 of IS 16444 (Part 1
6.10.1(Test of power consumption)	-	575	-
6.12(Operation of Accessories)	-	1150	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	965	-
6.12(Magnetic induction of External Origin 0.5mT)	-	965	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	965	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	965	-
6.12(DC & Even Harmonics in the ac current circuit)	-	965	-
6.12(Voltage Unbalanced)	-	965	-
6.12(Reversed Phase Sequence)	-	965	-
6.12(Waveform 10% of 3rd Harmonics)	-	965	-
6.12(Frequency Variation)	-	965	-
6.12(Voltage Variation)	-	965	-
6.12(Test of influence quantities)	-	0	Test wise Charges are added
6.12(Test of repeatability of error )	-	3450	-
6.12(Test of ambient temperature influence)	-	965	-
6.12(Test of no-load condition)	-	690	-
6.12(Test of starting condition)	-	690	-
6.12(Test of meter constant)	-	690	-
6.12(Test on limits of error due to variation of the current)	-	1520	-
6.10.6(Insulation resistance test)	-	575	-
6.10.6(ac high voltage test)	-	575	-
6.10.6(Impulse voltage test)	-	7590	-
6.8.1(Additional information)	-	0	Charges Covered in Marking of smart meters
6.8(Connection diagrams and terminal marking)	-	0	Charges Covered in Marking of smart meters
6.7(Output device)	-	5000	-
6.6(Display of measured values)	-	2000	-
6.2.2(Insulating encased meter)	-	0	Charges Covered in General and constructional requirements
6.2.2(Terminal Cover(s))	-	0	Charges Covered in General and constructional requirements
6.2.1(Terminals, terminal block and protective earth ter-minal)	-	0	Charges Covered in General and constructional requirements
6.2(Communication module Load switch)	-	0	Charges Covered in General and constructional requirements
6.2(Window)	-	0	Charges Covered in General and constructional requirements
6.2(Meter case)	-	0	Charges Covered in General and constructional requirements
6.2(General and constructional requirements)	-	3000	-
6.11(Surge Immunity test)	-	7500	-
12.5 a) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	10465	-
12.5 b) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	0	Charges Covered in 12.5 a
6.5(Protection against penetration of dust and water)	-	10465	-

30 Nov, 2028

-
-

107

IS 16102 : Part 2 (2017)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

210900 View breakup
Rs. 2,10,900/- (Up to 6000 hrs. life))

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	1000	NA
8(Lamp Input)	-	19400	Test Charges included of Harmonics and power factor: 6000 Rs. & Test Charges of EMISSION (RADIATED AND CONDUCTED) OF RADIO FREQUENCY DISTURBANCE: 13400 Rs. Total Test charges : (6000 + 13400)= 19400 Rs.
9(light output)	-	45000	Test charges included of Luminous flux: 25000 Rs. and Test charges for center beam intensity and Beam angle : 20000 Rs. Total test charges : (25000 + 20000) =45000 Rs.
10(Colour Nomenclature, Variation and Rendering)	-	25000	NA
11(Lamp Life)	-	120000	NA

30 Nov, 2028

-
Exclusion: Cl.6 (Dimensions)

108

IS 335 (2018)

New insulating oils - Specification (Fifth Revision)

40425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Viscosity)	-	1640	Viscosity at 40C Rs. 410/- Viscosity at 0 C Rs. 410/- Viscosity at -30C Rs. 410/- Viscosity at -40C Rs. 410/-
6.2(Pour Point)	-	570	Per Sample
6..3(Water Content)	-	1280	Per Sample
6.4(Breakdown Voltage)	-	710	Per Sample
6.5(Dielectric Dissipation Factor (DDF))	-	990	Per Sample
6.6(Appearance)	-	180	Per Sample
6.7(Acidity)	-	520	Per Sample
6.8(Interfacial Tension (IFT))	-	410	Per Sample
6.15(Flash Point)	-	410	Per Sample
6.1(Corrosive Sulphur and Potentially Corrosive Sulphur)	-	1380	Per Sample
6.11(Additives)	-	1150	Per Sample
6.12(Oxidation Stability)	-	5180	Per Sample
6.16(Density)	-	410	Per Sample
6.19(2-Furfural (2-FAL) and Related Compounds Content)	-	3700	Per Sample
6.9(Sulphur Content)	-	7475	Per Sample
6.13(Gassing Tendency)	-	5570	Per Sample
6.17(Polycyclic Aromatics (PCA))	-	8850	Per sample

30 Nov, 2028

-
Exclude Cl. No. 6.11 Additivies, Cl. No. 6.14 Electrostatic Charging Tendency (ECT), Cl. No. 6.18 Polychlorinated Biphenyls (PCB), Cl. No. 6.21 DBDS Content, Cl. No. 6.22 Stray Gassing of Oil.

109

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

Plugs and sockets-outlets of rated voltage up to and in

14775 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Ratings)	-	100	Total test charges for cl. no. 6 is Rs. 100/-
6.0(Ratings)	-	0	Total test charges for cl. no. 6 is Rs. 100/-
7.0(Classification)	-	100	Total test charges for cl. no. 7 is Rs. 100/-
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
7.0(Classification)	-	0	---
8.0(Marking)	-	100	Total test charges for cl. no. 8 is Rs. 100/-
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
8.0(Marking)	-	0	---
9.0(Checking of dimensions)	-	200	Total test charges for cl. no. 9 is Rs. 100/- (For single rating) Total test charges for cl. no. 9 is Rs. 200/- (For Combined rating)
9.0(6A/10A )	-	0	---
9.0(6A/10A )	-	0	---
9.0(6A/10A )	-	0	---
9.0(16 A)	-	0	---
9.0(16 A)	-	0	---
9.0(16 A)	-	0	---
10.1(Protection against Electric Shock)	-	200	Total test charges for cl. no. 10 is Rs. 100/- (For single rating) Total test charges for cl. no. 10 is Rs. 200/- (For Combined rating)
10.1(Protection against Electric Shock)	-	0	---
10.3(Protection against Electric Shock)	-	0	---
10.5(Protection against Electric Shock)	-	0	---
10.6(Protection against Electric Shock)	-	0	---
11.1(Provision for Earthing)	-	200	Total test charges for cl. no. 11 is Rs. 100/- (For single rating) Total test charges for cl. no. 11 is Rs. 200/- (For Combined rating)
11.2(Provision for Earthing)	-	0	---
11.5(Provision for Earthing)	-	0	---
12.1(Terminals)	-	0	---
12.2.1(Terminals)	-	200	Total test charges for cl. no. 12 is Rs. 100/- (For single rating) Total test charges for cl. no. 12 is Rs. 200/- (For Combined rating)
12.2.2(Terminals)	-	0	---
12.2.3(Terminals)	-	0	---
12.2.4(Terminals)	-	0	---
12.2.5(Terminals)	-	0	---
12.2.7(Terminals)	-	0	---
12.2.9(Terminals)	-	0	---
12.2.10(Terminals)	-	0	---
12.2.11(Terminals)	-	0	---
13.1(Construction of fixed Socket Outlets)	-	200	Total test charges for cl. no. 13 is Rs. 100/- (For single rating) Total test charges for cl. no. 13 is Rs. 200/- (For Combined rating)
13.2(Construction of fixed Socket Outlets)	-	0	---
13.3(Construction of fixed Socket Outlets)	-	0	---
13.4(Construction of fixed Socket Outlets)	-	0	---
13.4(Construction of fixed Socket Outlets)	-	0	---
13.4(Construction of fixed Socket Outlets)	-	0	---
13.4(Construction of fixed Socket Outlets)	-	0	---
13.4(Construction of fixed Socket Outlets)	-	0	---
13.5(Construction of fixed Socket Outlets)	-	0	---
13.9(Construction of fixed Socket Outlets)	-	0	---
13.1(Construction of fixed Socket Outlets)	-	0	---
13.16(Construction of fixed Socket Outlets)	-	0	---
13.14(Construction of fixed Socket Outlets)	-	0	---
13.17(Construction of fixed Socket Outlets)	-	0	---
15.0(Interlocked socket-outlets)	-	0	---
16.1(Resistance to Ageing )	-	1750	Total test charges for cl. no. 16 is Rs. 1750/- (For Socket-outlets) Total test charges for cl. no. 16 is Rs. 1500/- (For Plugs)
16.2(Resistance to Harmful Ingress of Water)	-	0	---
16.3(Resistance to humidity)	-	0	---
17.1(Insulation Resistance)	-	200	Total test charges for cl. no. 17 is Rs. 100/- (For single rating) Total test charges for cl. no. 17 is Rs. 200/- (For Combined rating)
17.2( Electric Strength)	-	0	---
18.0(Operation of Earthing Contacts)	-	200	Total test charges for cl. no. 18 is Rs. 100/- (For single rating) Total test charges for cl. no. 18 is Rs. 200/- (For Combined rating)
19.0(Temperature Rise )	-	1350	Total test charges for cl. no. 19 is Rs. 650/- (For single rating- socket) Total test charges for cl. no. 19 is Rs. 1350/- (For Combined rating-socket) Total test charges for cl. no. 19 is Rs. 500/- (For plugs)
20.0(Making & Breaking Capacity)	-	1500	Total test charges for cl. no. 20 is Rs. 750/- (For single rating) Total test charges for cl. no. 20 is Rs. 1500/- (For Combined rating)
21.0(Normal Operation)	-	3275	Total test charges for cl. no. 21 -socket : for 6A: Rs. 2450/-, for 10A: Rs.2675/-, for 16A :Rs.2975, for 6/16A: Rs.3150/- Total test charges for cl. no. 21 -Plugs: for 2.5A: Rs. 2600/-, for 6A: Rs.2900/-, for 10A :Rs.2975, for 6/16A: Rs.3275/-
21.0(Normal Operation)	-	0	---
21.0(Normal Operation)	-	0	---
21.0(Normal Operation)	-	0	---
22.1(Verification of Max withdrawal force)	-	0	Total test charges for cl. no. 22 is Rs. 100/- (For single rating) Total test charges for cl. no. 22 is Rs. 200/- (For Combined rating)
22.2(Verification of Minimum withdrawal force)	-	0	---
24.1(a) Mechanical Strength )	-	0	Total test charges for cl. no. 24 is Rs. 100/- (For single rating) Total test charges for cl. no. 24 is Rs. 200/- (For Combined rating)
24.3(a) For surface type socket outlet)	-	0	---
24.6(b) For screwed glands of accessories other than ordinary)	-	0	---
24.8(c) For shuttered socket-outlets )	-	0	---
24.14.1(e)Verification of the Non-removal of Covers or Cover-Plates )	-	0	---
24.14.2(f)Verification of the Removal of Covers or Cover-Plates )	-	0	---
25.1(Resistance to heat)	-	100	Total test charges for cl. no. 25 is Rs. 100/-
25.2(Resistance to heat)	-	0	---
25.3(Resistance to heat)	-	0	---
25.4(Resistance to heat)	-	0	---
26.1(Screws, current carrying parts and connections)	-	200	Total test charges for cl. no. 26 is Rs. 100/- (For single rating) Total test charges for cl. no. 19 is Rs. 200/- (For Combined rating)
26.2(Screws, current carrying parts and connections)	-	0	---
26.7(Screws, current carrying parts and connections)	-	0	---
27.1(Creepage distances, clearances and distances through sealing compound )	-	0	Total test charges for cl. no. 27 is Rs. 100/-
27.2(Creepage distances, clearances and distances through sealing compound )	-	0	---
27.3(Creepage distances, clearances and distances through sealing compound )	-	0	---
28.1.1(Glow-Wire Test )	-	850	---
28.2(Resistance to Tracking)	-	500	---
29.0(Resistance to Rusting)	-	100	Total test charges for cl. no. 29 is Rs. 100/-
6(RATINGS)	-	0	----
6.1(RATINGS)	-	0	---
6.2(RATINGS)	-	0	---
7(CLASSIFICATION)	-	0	---
7.1(CLASSIFICATION)	-	0	---
7.1.1 (CLASSIFICATION)	-	0	---
7.1.2(CLASSIFICATION)	-	0	---
7.1.3 (CLASSIFICATION)	-	0	---
7.1.4(CLASSIFICATION)	-	0	---
7.2(CLASSIFICATION)	-	0	---
7.2.1(CLASSIFICATION)	-	0	---
7.2.2 (CLASSIFICATION)	-	0	---
7.2.3(CLASSIFICATION)	-	0	---
7.2.4(CLASSIFICATION)	-	0	---
7.2.5(CLASSIFICATION)	-	0	---
7.3(CLASSIFICATION)	-	0	---
8.1(MARKING)	-	0	---
8.2(MARKING)	-	0	---
8.3(MARKING)	-	0	---
8.4(MARKING)	-	0	---
8.5(MARKING)	-	0	---
8.6(MARKING)	-	0	---
8.7(MARKING)	-	0	---
8.8(MARKING)	-	0	---
9.1(CHECKING OF DIMENSIONS)	-	0	---
9.2(CHECKING OF DIMENSIONS)	-	0	---
9.3(CHECKING OF DIMENSIONS)	-	0	---
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	---
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
11(PROVISION FOR EARTHING)	-	200	---
11.1(PROVISION FOR EARTHING)	-	0	---
11.2(PROVISION FOR EARTHING)	-	0	---
11.3(PROVISION FOR EARTHING)	-	0	---
11.4(PROVISION FOR EARTHING)	-	0	---
11.5(PROVISION FOR EARTHING)	-	0	---
6.2(RATINGS)	-	0	---
7.1(CLASSIFICATION)	-	0	---
7.1.1 (CLASSIFICATION)	-	0	---
7.1.2(CLASSIFICATION)	-	0	---
7.1.3 (CLASSIFICATION)	-	0	---
7.1.4(CLASSIFICATION)	-	0	---
7.2(CLASSIFICATION)	-	0	---
7.2.1(CLASSIFICATION)	-	0	---
7.2.2 (CLASSIFICATION)	-	0	---
7.2.3(CLASSIFICATION)	-	0	---
7.2.4(CLASSIFICATION)	-	0	---
7.2.5(CLASSIFICATION)	-	0	---
7.3(CLASSIFICATION)	-	0	---
8.1(MARKING)	-	0	---
8.2(MARKING)	-	0	---
8.3(MARKING)	-	0	---
8.4(MARKING)	-	0	---
8.7(MARKING)	-	0	---
8.8(MARKING)	-	0	---
9.1(CHECKING OF DIMENSIONS)	-	0	---
9.2(CHECKING OF DIMENSIONS)	-	0	---
9.3(CHECKING OF DIMENSIONS)	-	0	---
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	---
11(PROVISION FOR EARTHING)	-	0	---
11.3(PROVISION FOR EARTHING)	-	0	---
11.4(PROVISION FOR EARTHING)	-	0	---
12(TERMINALS)	-	3275	---
12.1.1(TERMINALS)	-	0	---
12.1.2(TERMINALS)	-	0	---
12.2(TERMINALS)	-	0	---
12.2.1(TERMINALS)	-	0	---
12.2.6(TERMINALS)	-	0	---
12.2.8(TERMINALS)	-	0	---
12.3(TERMINALS)	-	0	---
12.3.1(TERMINALS)	-	0	Total test charges for cl. no. 12.3 (screwless terminals) : for 6A: 1525/-, for 10A: Rs. 2200/-, for 16A: Rs. 3175/-, for 6/16A: Rs.3275/-
12.3.2(TERMINALS)	-	0	---
12.3.3(TERMINALS)	-	0	---
12.3.4(TERMINALS)	-	0	---
12.3.5(TERMINALS)	-	0	---
12.3.6(TERMINALS)	-	0	---
12.3.7(TERMINALS)	-	0	---
12.3.8(TERMINALS)	-	0	---
12.3.9(TERMINALS)	-	0	---
12.3.10(TERMINALS)	-	0	---
12.3.11 (a)(TERMINALS)	-	0	---
12.3.11 (b)(TERMINALS)	-	0	---
12.3.12 (TERMINALS)	-	0	---
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	200	---
13.7(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.8(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.11(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.12(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.15(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.18(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.19(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.2(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.21(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.22(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
13.23(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	---
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	---
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	---
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1750	---
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	---
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	---
22(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	200	---
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	250	---
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	---
24(MECHANICAL STRENGTH)	-	200	---
24.1(MECHANICAL STRENGTH)	-	0	---
24.2(MECHANICAL STRENGTH)	-	0	---
24.3(MECHANICAL STRENGTH)	-	0	---
24.4(MECHANICAL STRENGTH)	-	0	---
24.5(MECHANICAL STRENGTH)	-	0	---
24.6(MECHANICAL STRENGTH)	-	0	---
24.7(MECHANICAL STRENGTH)	-	0	---
24.8(MECHANICAL STRENGTH)	-	0	---
24.9(MECHANICAL STRENGTH)	-	0	---
24.1(MECHANICAL STRENGTH)	-	0	---
24.11(MECHANICAL STRENGTH)	-	0	---
24.12(MECHANICAL STRENGTH)	-	0	---
24.13(MECHANICAL STRENGTH)	-	0	---
24.14(MECHANICAL STRENGTH)	-	0	---
24.14.1(MECHANICAL STRENGTH)	-	0	---
24.14.2(MECHANICAL STRENGTH)	-	0	---
24.15 & 24.14.1(MECHANICAL STRENGTH)	-	0	---
24.15 & 24.14.2(MECHANICAL STRENGTH)	-	0	---
24.16 & 24.14.1(MECHANICAL STRENGTH)	-	0	---
24.16 & 24.14.2(MECHANICAL STRENGTH)	-	0	---
24.17(MECHANICAL STRENGTH)	-	0	---
24.18(MECHANICAL STRENGTH)	-	0	---
25(RESISTANCE TO HEAT)	-	100	---
25.1(Resistance to heat)	-	0	---
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	---
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	---
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	---
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	850	---
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	---
28.1.2(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	---
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	2175	Total test charge for cl. no. 30 is Rs. 2175/-
30.1(Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-	0	---
30.2(Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-	0	---
30.3(Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-	0	---
30.4(Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-	0	---

30 Nov, 2028

-
-

110

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

Electronic type fan regulator for use with single phase

26025 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1 (a)(Marking )	-	500	---
9.1 (b)(Marking )	-	0	---
9.1 (c)(Marking )	-	0	---
9.1 (d)(Marking )	-	0	---
9.1 (e)(Marking )	-	0	---
9.1 (f)(Marking )	-	0	---
9.2(Marking )	-	0	---
6.1(Design and General Construction)	-	500	---
6.2(Design and General Construction)	-	0	---
6.3(Design and General Construction)	-	0	---
6.5(Design and General Construction)	-	0	---
6.6(Design and General Construction)	-	0	---
9.5.1 , 7.3(Temperature Rise)	-	850	---
9.5.1 , 7.3 (a)(Temperature Rise )	-	0	---
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	---
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	---
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	---
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	500	---
9.5.3(High Voltage Test)	-	500	---
9.5.5(Earthing Connection)	-	500	---
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	500	---
7.6(General and safety requirements)	-	1700	---
7.7(Voltage drop)	-	500	---
8.1(Performance)	-	800	---
8.2(Performance)	-	0	---
8.3(Performance)	-	0	---
9.5.7, 9.5.4(Moisture Resistance )	-	3350	---
7.4.1(a)(Mechanical strength )	-	500	---
7.4.1(b)(Mechanical strength )	-	0	---
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	500	---
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	500	---
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	---
9.5.10( Electrical Endurance Test)	-	4800	---
9.5.11.2(Environmental Tests)	-	1525	---
9.5.11.3(Environmental Tests)	-	750	---
9.5.11.4(Environmental Tests)	-	3800	---
9.5.12(Resistance to Abnormal Heat and to Fire)	-	2450	---
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	0	---
9.5.13(Resistance to Rusting )	-	500	---
9.5.14(Checking of Dimensions)	-	500	---

30 Nov, 2028

-
REVISED VERSION OF IS 11037:2019 INCLUDED W.E.F. 17-02-2021.

111

IS 15111 : PART 1 AND PART 2 (2002)

Self ballasted lamps for general lighting services: Part 1 safety requirements

13140 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	280	-
7(Interchangeability )	-	390	-
8(Protection against electric shock)	-	150	-
9.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH After HUMIDIT’Y TREATMENT)	-	2970	-
10(Mechanical strength test )	-	480	-
11(Cap Temperature rise test )	-	1600	-
12(Resistance to heat)	-	650	-
13(Resistance to Flame and Ignition)	-	2780	-
14(Fault Conditions)	-	3840	Fault condition to be conducted on 6 Nos. lamps. Hence, total test charges for fault condition lamp is Rs.640 x 6 = Rs.3840/-

30 Nov, 2028

-
-

112

IS 15111 : Part 2 (2002)

Self ballasted lamps for general lighting services: Part 2 performance requirements

63810 View breakup
Rs.63810/-(upto 6000 hrs life)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	370	-
8.1(STARTING AND RUN-UP)	-	720	-
8.2(STARTING AND RUN-UP)	-	0	-
9(Lamp Wattage)	-	0	Combine test charges of Lamp wattage, Luminous flux, PF and Efficacy is : 2410 Rs.
10(Luminous Flux)	-	2410	-
11(Colour)	-	1560	-
12(LUMEN MAINTENANCE)	-	0	-
13.1(Life)	-	43790	Combine Test charges for Lumen maintenance at 2000 hours and Life test up to 6000 Hrs is 43790 Rs.
13.2(Life)	-	0	-
14(Harmonics)	-	1560	-
16(Power factor)	-	0	-
18.1(Marking)	-	0	-
15(Lamp Efficacy)	-	0	-

30 Nov, 2028

-
-

113

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

30760 View breakup
Rs. 30,760/- (Marked with T1 or T2 or Txxx).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating )	-	315	Total test charge for cl. no. 6 is Rs. 315/-
6(Rating )	-	0	Total test charge for cl. no. 6 is Rs. 315/-
7(Classification)	-	315	Total test charge for cl. no. 7 is Rs. 315/-
7.2(Classification)	-	0	Total test charge for cl. no. 7 is Rs. 315/-
7.3(Classification)	-	0	Total test charge for cl. no. 7 is Rs. 315/-
7.4(Classification)	-	0	Total test charge for cl. no. 7 is Rs. 315/-
7.5(Classification)	-	0	Total test charge for cl. no. 7 is Rs. 315/-
7.6(Classification)	-	0	Total test charge for cl. no. 7 is Rs. 315/-
8.1(Marking )	-	315	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.1(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.2(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.2(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.2(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.3(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.4(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.5(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.6(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.7(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
8.8(Marking )	-	0	Total test charge for cl. no. 8 is Rs. 315/-
9.1(Dimensions)	-	315	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.1(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.2(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.3(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.3(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.3(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.3(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.3(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
9.3(Dimensions)	-	0	Total test charge for cl. no. 9 is Rs. 315/-
10(Protection against electric shock )	-	315	Total test charge for cl. no. 10 is Rs. 315/-
11.1(Terminals)	-	1135	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.2(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.3(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.3(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.3(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.3(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.3(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.3(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
11.4(Terminals)	-	0	TERMINALS-SCREW TYPE : Rs. 315/- TERMINALS-SCREW less TYPE : 1135/-
12(Provision for Earthing)	-	315	Total test charge for cl. no. 12 is Rs. 315/-
13.1(Construction)	-	315	Total test charge for cl. no. 13 is Rs. 315/-
13.1(Construction (Data Sheet No 7005-10))	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.3(Construction )	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.4(Construction )	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.5(Construction)	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.2 ,13.6 & 13.7 (Construction)	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.2 ,13.6 & 13.8(Construction)	-	0	Total test charge for cl. no. 13 is Rs. 315/-
13.11(Construction)	-	0	Total test charge for cl. no. 13 is Rs. 315/-
14(Construction)	-	0	Total test charge for cl. no. 13 is Rs. 315/-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	780	Total test charge for cl. no. 15 is Rs. 780/-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	Total test charge for cl. no. 15 is Rs. 780/-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	0	Total test charge for cl. no. 15 is Rs. 780/-
16.1(Mechanical Strength)	-	350	Total test charge for cl. no. 16 is Rs. 350/-
16.1(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
16.2(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
16.3(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
16.4(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
16.5(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
16.6 & Table - 6(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
16.7(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
16.8(Mechanical Strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
17(Screws,current-carrying parts and connections)	-	315	Total test charge for cl. no. 17 is Rs. 315/-
18(Creepage distances and Clearances)	-	315	Total test charge for cl. no. 18 is Rs. 315/-
18.1, Table 8(Creepage distances and Clearances)	-	0	Total test charge for cl. no. 18 is Rs. 315/-
18.1, Table 8(Creepage distances and Clearances)	-	0	Total test charge for cl. no. 18 is Rs. 315/-
18.1, Table 8(Creepage distances and Clearances)	-	0	Total test charge for cl. no. 18 is Rs. 315/-
18.1, Table 8(Creepage distances and Clearances)	-	0	Total test charge for cl. no. 18 is Rs. 315/-
18.1, Table 8(Creepage distances and Clearances)	-	0	Total test charge for cl. no. 18 is Rs. 315/-
18.1, Table 8(Creepage distances and Clearances)	-	0	Total test charge for cl. no. 18 is Rs. 315/-
18.1, Table 8(Creepage distances and Clearances)	-	0	Total test charge for cl. no. 18 is Rs. 315/-
19.1(General resistance to heat)	-	20490	GENERAL RESISTANCE TO HEAT -FOR LH WITHOUT TEMP. MARKING OR MARKED Txxx : Rs. 2425/- GENERAL RESISTANCE TO HEAT- FOR LH MARKED T1 OR T2 : Rs. 20490/-
19.2(General resistance to heat)	-	0	GENERAL RESISTANCE TO HEAT -FOR LH WITHOUT TEMP. MARKING OR MARKED Txxx : Rs. 2425/- GENERAL RESISTANCE TO HEAT- FOR LH MARKED T1 OR T2 : Rs. 20490/-
19.3(General resistance to heat)	-	0	GENERAL RESISTANCE TO HEAT -FOR LH WITHOUT TEMP. MARKING OR MARKED Txxx : Rs. 2425/- GENERAL RESISTANCE TO HEAT- FOR LH MARKED T1 OR T2 : Rs. 20490/-
19.4(Resistance to heat test)	-	0	GENERAL RESISTANCE TO HEAT -FOR LH WITHOUT TEMP. MARKING OR MARKED Txxx : Rs. 2425/- GENERAL RESISTANCE TO HEAT- FOR LH MARKED T1 OR T2 : Rs. 20490/-
20.1(Resistance to heat, fire and tracking)	-	3440	Total test charge for cl. no. 20 is Rs. 3440/-
20.3(Resistance to heat, fire and tracking)	-	0	Total test charge for cl. no. 20 is Rs. 3440/-
20.4(Resistance to heat, fire and tracking)	-	0	Total test charge for cl. no. 20 is Rs. 3440/--
20.5(Resistance to tracking)	-	0	Total test charge for cl. no. 20 is Rs. 3440/-
21.1(Resistance to excessive residual stresses and to rusting)	-	1415	Total test charge for cl. no. 21 is Rs. 1415/-
21.1(Resistance to excessive residual stresses and to rusting)	-	0	Total test charge for cl. no. 21 is Rs. 1415/-

30 Nov, 2028

-
-

114

IS 15652 (2006)

Insulating mats for electrical purposes - Specification

23749 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Composition (As per Cl. 5.1 of IS 15652 : 2006))	-	0	This test is excluded
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	414	NA
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	345	NA
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	161	NA
6(Colour (As per Cl. 6.4 of IS 15652 : 2006))	-	0	This test is excluded
7(Workmanship & Finish (As per Cl. 7.1 of IS 15652 : 2006))	-	161	NA
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	690	NA
8(Di-electric Properties (As per Cl.8.2.1 and C-3.1 of IS 15652 : 2006))	-	690	NA
8(Di-electric Properties (As per Cl.8.2.2 and C-3.2 of IS 15652 : 2006))	-	552	NA
8(Di-electric Properties (As per Cl.8.2.3 and C-3.3 of IS 15652 : 2006))	-	690	NA
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	1656	NA
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	5934	NA
8(Thermal Properties (Cl..8.4))	-	1140	NA
8(Thermal Properties (Cl..8.4))	-	3795	NA
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	3726	NA
8(Extreme Low Temperature (Cl.8.6))	-	3795	NA

30 Nov, 2028

-
Exclusion: Cl.5 (Composition (As per Cl. 5.1 of IS 15652 : 2006)), Cl. 6 (Colour (As per Cl. 6.4 of IS 15652 : 2006))

115

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

Class 1 and 2

559813 View breakup
Rs. 5,53,978/- (For 1Phase All tests) [Rs. 10,000/- for Routine tests as per Table 20, Rs. 20,000/- for Acceptance tests as per Table 20, Rs. 6000/- for testing as per Cl. No. 4.2.10.8 & 4.2.10.9, Rs. 42,000/- for testing as per Cl. No. 4.2.12.3, Rs. 2,24,878/- for Type test as per Table 20, Rs. 2,28,978/- for Type test as per Table 20 with General & Construction, Rs. 2,92,878/- for Type test as per Table 20 with UC1 Category load switch, Rs. 4,41,878/- for Type test as per Table 20 with UC2 & UC3 Category load switch, Rs. 2,09,000/- for Annex G for UC2 & UC3 (Load Switch Test) ]. Rs. 5,59,813/- (For 3 Phase All tests) [Rs. 11,000/- for Routine tests as per Table 20, Rs. 14,500/- for Acceptance tests as per Table 20, Rs. 6000/- for testing as per Cl. No. 4.2.10.8 & 4.2.10.9, Rs. 42,000/- for testing as per Cl. No. 4.2.12.3, Rs. 2,30,713/- for Type test as per Table 20, Rs. 2,34,813/- for Type

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	7500	-
5.4.6.3(Table 15, power source 500 VA)	-	2000	-
5.4.6.4(500±50V dc)	-	1500	-
4.6.1(As per table 10 & 11, cl 5.6.1)	-	4500	-
5.6.5(As per cl 4.6.5)	-	1500	For Single Phase meter Rs. 1000/-
5.6.4(As per cl 4.6.3, Table 13)	-	1500	For Single Phase meter Rs. 1000/-
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	1500	For Single Phase meter Rs. 1000/-
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	5000	For Single Phase meter Rs. 4000/-
4.6.2(As per table 12)	-	14530	-
5.4.1(As per 4.4.1.1)	-	1500	-
5.4.2(As per 4.4.2.1)	-	4800	Testing Charges Including Abnormal Voltage Test Charges Rs. 1800/-
5.4.3(Table 8, as per cl4.4.3)	-	3000	-
5.4.4(Table 9, and cl 4.4.4)	-	3000	-
5.4.5(As per cl 4.4.5)	-	2500	-
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	3000	-
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	9000	-
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	10000	-
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	9000	-
5.2.1(As per cl 12.3.3 of IS 13779)	-	1000	-
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	5000	For Single Phase meter Rs. 3000/-
5.5.5(according to IEC 62052-11)	-	54250	For Single Phase meter Rs. 52820/-
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	8325	For Single Phase meter Rs. 7400/-
5.5.3(Table 12 & IS 14700 (Part 4/Sec 3))	-	34650	-
5.5.2(according to IS 14700 (Part 4/Sec 2))	-	6600	For Single Phase meter Rs. 5950/-
5.5.6(Surge Immunity Test)	-	7500	-
4.2.4(IS 13360 (Part 6/Sec 17) for a temperature of 135°C and a pressure of 1.8 MPa (Method A).)	-	2300	-
5.2.3(As per IS 9000 (Part 8))	-	13000	For Single Phase meter Rs. 11200/-
4.1.1(By Inspection)	-	0	Test Charges included in General Mechanical Requirements
4.1.2(By Inspection)	-	0	Test Charges included in General Mechanical Requirements
4.1.3(By Inspection)	-	0	Test Charges included in General Mechanical Requirements
4.1.4(By Inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.1(By Inspection)	-	1800	-
4.2.2(By Inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.3(By Inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.4(By Inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.5(shall have a separate cover which can be sealed independently of the meter cover. The terminal cover shall enclose the actual terminals)	-	0	Test Charges included in General Mechanical Requirements
4.2.6(By measurement)	-	0	Test Charges included in General Mechanical Requirements
4.2.7(Standard test fingure)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.2(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.3(By measurement)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.4(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.5(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.6(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.7(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.10.8(General requirements- Mechanical and electrical characteristics)	-	3000	-
4.2.10.9(General requirements- Optical characteristics)	-	3000	-
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.11.1(By inspection)	-	0	Test Charges included in General Mechanical Requirements
4.2.12.3(Keypad Interface)	-	42000	-
4.6.3(Limits of error due to Ambient temperature Variation)	-	2500	For Single Phase meter Rs. 2000/-
5.2.5(Protection against penetration of dust (IP5X))	-	12558	-
5.2.5(Protection against penetration of water (IP1X))	-	0	Test Charges included in Protection against penetration of dust (IP5X)
5.8(Test of Load Switch)	-	2000	-
5.9(Test of Consumption-Based charging function)	-	3000	-
5.10(Test of Time-Based charging function)	-	3000	-
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	60000	-
4.6.6.2.2 & G2(Normal operation)	-	6000	-
4.6.6.2.2 & G3(Electrical endurance)	-	80000	-
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	7500	-
4.6.6.2.2 & G5(Fault current making capacity)	-	56000	-
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	31000	-
4.6.6.2.2 & G7(Minimum switched current)	-	9000	-
4.6.6.2.2 & G8(Dielectric strength)	-	19500	-

30 Nov, 2028

-
-

116

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

324380 View breakup
Rs. 2,60,250/- for 1 core (upto 11 kV) ; Rs. 2,69,700/- for 1 core (above 11 kV) ; Rs. 3,14,930/- for 3 core (upto 11 kV) ; Rs. 3,24,380/- for 3 core (above 11 kV) ; Multicore cables: additional charges Rs. 500/- per core per test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.2(Partial discharge test)	-	7350	7350/- For Single core, 12600/- For three core
20.3(Bending test)	-	3150	2100/- For Single core, 3150/- For three core
20.4(Dielectric power factor test : As a function of voltage)	-	10290	5250/- For Single core, 10290/- For three core
20.5(Heating Cycle Test)	-	57750	47250/- For Single core, 57750/- For three core
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	36750	27300/- upto 11kV, 36750/- above 11kV
20.7(High voltage test)	-	8400	6300/- For Single core, 8400/- For three core
19.1 i) a)(Annealing test (for copper))	-	900	NA
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	900	NA
19.1 i) c)(Wrapping test ( for aluminium))	-	500	NA
19.1 i) d)(Resistance test - Main conductor )	-	1300	NA
12.2(INSULATION : Thickness of Insulation)	-	1600	nA
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	0	NA
12.4(Eccentricity and Ovality)	-	1600	NA
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	NA
18.3(Thicknes of outer sheath : minimum )	-	1600	nA
18.3(Thicknes of outer sheath : average )	-	0	NA
19.1 i) d)(Resistance test - Neutral conductor )	-	1300	NA
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	2000	NA
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	0	NA
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	8600	NA
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	NA
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	1500	NA
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	0	NA
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	1300	NA
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	NA
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	10300	NA
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	8000	NA
19.1 v) b)(Volume resistivity)	-	3100	NA
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	2000	NA
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	0	NA
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	8600	NA
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	NA
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	NA
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	NA
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	1300	na
19.1 vi) d)(Sheath : Hot deformation)	-	1900	NA
19.1 vi) e)(Loss of massIn air oven)	-	8600	NA
19.1 vi) f)(Sheath : Heat shock test)	-	1300	NA
19.1 vi) g)(Sheath : Thermalstability)	-	1900	NA
19.1 vi) h)(Carbon black content of polythene sheath )	-	4250	NA
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	10300	NA
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	0	NA
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	0	NA
19.1 xi)(Insulation resistance test : volume resistivity )	-	2800	NA
20.4(Dielectric power factor test : As a function of temperature)	-	12600	above 11 kV :12600 3 core upto and above 11 kV : 8400 for 1 core
20.8(Flammability test)	-	1500	NA
20.1(Oxygen Index Test)	-	3750	NA
20.12(Flame Retardance Test on Bunched Cables)	-	10000	NA
20.13(Test for Halogen Acid Gas Evolution)	-	5000	NA
20.14( Test for Smoke Density)	-	6250	NA
20.15(Temperature Index)	-	6250	NA

30 Nov, 2028

-
Termination will be in customer scope for cables above 11kV

117

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

89550 View breakup
Rs. 63,670/-(Except Vibration Test); Rs. 89,550/-(Including Vibration Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	-
7.0(Construction)	-	27880	Above Test charges included test charges of construction, terminals , external & internal wiring: 2000 Rs. Test charges for vibration test (applicable for rough service luminary only): 25880 Rs. Total charges : (2000 + 25880) = 27880 Rs.
8.0(Creepage Distance and Clearances)	-	500	-
9.0(Provision for earthing)	-	500	-
10.0(Terminals)	-	0	-
11.0(External & Internal Wiring)	-	0	-
12.0(Protection against electric shock)	-	500	-
13.0(Endurance Tests and Thermal Tests)	-	17600	Above test charges for endurance test is 11600 Rs. , test charges for thermal test normal test is 3000 Rs. , test charges for thermal test abnormal test is 3000 Rs. Total test charges : (11600 + 3000 + 3000) = 17600 Rs.
14.0(Resistance to Dust & Moisture)	-	9000	Above Test charges for resistance to dust IP1X/2X/3X/4X : 1500 Rs. , IPX1/X2 : 2000 Rs. Also Test charges for resistance to moisture is 5500 Rs. Total test charges : (1500 + 2000 + 5500) = 9000 Rs.
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	12070	Above test charges included charges of resistance to heat is 1500 Rs. , resistance to fire is 3500 Rs. , resistance to fire (Glow wire test) is 5000 Rs., resistance to tracking is 2070 Rs. Total test charges : (1500+3500+5000+2070)=12070 Rs.
17.0(Photometric Test)	-	20000	-

30 Nov, 2028

-
-

118

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

89550 View breakup
Rs. 63,670/-(Except Vibration Test); Rs. 89,550/-(Including Vibration Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	-
7(Construction)	-	27880	Above test charges included charges of construction, terminals, external & internal wiring: 2000 Rs. and vibration test charges: 25880 Rs. Total test charges: (2000 + 25880)= 27880 Rs.
8(Creepage Distance and Clearances)	-	500	-
9(Provision for earthing)	-	500	-
10(Terminals)	-	0	-
11(External & Internal Wiring)	-	0	-
12(Protection against electric shock)	-	500	-
13(Endurance Tests and Thermal Tests)	-	17600	Above test charges included charges of endurance test: 11600 Rs., and charges of thermal normal test: 3000 Rs. and abnormal test: 3000 Rs. Total test charges: (11600 + 3000 + 3000)= 17600 Rs.
14(Resistance to Dust and Moisture)	-	9000	Above test charges included charges of resistance to dust IP1X/2X/3X/4X: 1500 Rs. , Charges of IPX1/X2: 2000 Rs., and charges of Resistance to moisture: 5500 Rs. Total test charges : (1500+2000+5500)= 9000 Rs.
15(Insulation Resistance and Electric Strength)	-	1000	-
16(Resistance to Heat , fire and tracking)	-	12070	Above Test charges included charges of resistance to heat: 1500 Rs. , Charges of resistance to fire: 3500 Rs. , resistance to fire (glow wire test): 5000 Rs., resistance to tracking : 2070 Rs. Total test charges: (1500+3500+5000+2070)=12070 Rs.
17(Photometric Test)	-	20000	-

30 Nov, 2028

-
-

119

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

93899 View breakup
Rs. 68,019/-(Except Vibration Test); Rs. 93,899/-(Including Vibration Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	-
7.0(Construction)	-	27880	Above test charges included charges of construction, terminals, external & internal wiring: 2000 Rs. and vibration test charges: 25880 Rs. Total test charges: (2000 + 25880)= 27880 Rs.
8.0(Creepage Distance and Clearances)	-	500	-
9.0(Provision for earthing)	-	500	-
10.0(Terminals)	-	0	-
11.0(External & Internal Wiring)	-	0	-
12.0(Protection against electric shock)	-	500	-
13.0(Endurance Tests and Thermal Tests)	-	17600	Above test charges included charges of endurance test: 11600 Rs., and charges of thermal normal test: 3000 Rs. and abnormal test: 3000 Rs. Total test charges: (11600 + 3000 + 3000)= 17600 Rs.
14.0(Resistance to Dust & Moisture)	-	13349	Above test charges included charges of resistance to dust IP 54/IP65/IP66: 7849 Rs., and charges of Resistance to moisture: 5500 Rs. Total test charges : (7849+5500)= 13349 Rs.
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	12070	Above Test charges included charges of resistance to heat: 1500 Rs. , Charges of resistance to fire: 3500 Rs. , resistance to fire (glow wire test): 5000 Rs., resistance to tracking : 2070 Rs. Total test charges: (1500+3500+5000+2070)=12070 Rs.
17.0(Photometric Test)	-	20000	-

30 Nov, 2028

-
-

120

IS 13340 : PART 1 (2012)

Shunt power capacitors of the self - Healing type for AC systems having a rated voltage up to and including 1000 V: Part 1 general - Performance, testing and rating - Safety requirements - Guide for installation and operation (First Revision)

up to 50kVAr

237725 View breakup
Routine Tests : Rs. 8,890/-, Type Tests : upto 4 kVar : Rs. 1,56,785/-, For 5 to 10 kVar : Rs. 1,58,135/-, For 11 to 25 kVar : Rs. 1,67,835/-, For 26 to 50 kVar : Rs. 2,37,725/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Capacitance Measurement and Output Calculation)	-	1365	RS.
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	2730	RS.
9.1(Voltage test between terminals)	-	1365	RS.
10.1(Voltage test between terminals and container)	-	700	RS.
11(Test of Internal Discharge Device)	-	1365	RS.
12(Sealing Test)	-	1365	RS.
13 & Table 2-Ambient air temperature for the thermal stability test(Thermal Stability Test)	-	26650	12,300/- for 0-4 KVAR, 13,650/- for 5-10 KVAR, 16,400/- for 11-25 KVAR, 26,650/- for 26-50 KVAR
14(Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature)	-	3450	RS.
9.2(Voltage test between terminals)	-	1365	RS.
10.2(Voltage test between terminals and container)	-	700	RS.
16(Discharge Test)	-	4100	RS.
17 & IEC 60831-2(Ageing Test)	-	130000	95,550/- for 0-10 KVAR, 1,02,500/- for 11-25 KVAR, 1,30,000/- for 26-50 KVAR
18 & IEC 60831-2(Self-Healing Test)	-	4800	4100/- for 0-25 KVAR, 4800/- for 26-50 KVAR
15(Lightning impulse voltage test between terminals and container)	-	3780	RS.
19 & IEC 60831-2(Destruction Test)	-	45100	22,550/- for 0-25 for KVAR, 45,100/- for 26-50 KVAR

30 Nov, 2028

-
-

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Electrical Research and Development Association (ERDA), Vadodara, Gujarat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940719 nirav.taunk@erda.org

Scope List