BIS - LIMS (Laboratory Information Management System)

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List

Reset

288 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

271

IS 3502 (2009)

Steel chequered plates (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Workmanship)	-	12000	5% discount on complete testing charges is applicable for BIS.
Cl 6(Workmanship)	-	12000	5% discount on complete testing charges is applicable for BIS.
Cl 8(UTM)	-	12000	5% discount on complete testing charges is applicable for BIS.
Cl 9(Press)	-	12000	5% discount on complete testing charges is applicable for BIS.
Cl 10(Length, Width, Thickness & Chequered Height)	-	12000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

272

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	12000	5% discount on complete testing charges is applicable for BIS.
Cl 8 & 9(Diameter)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Carbon %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Manganese %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Phosphorus %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Sulphur %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Silicon %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6( Copper %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6( Aluminium %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6( Nb)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(V)	-	12000	5% discount on complete testing charges is applicable for BIS.
6( Ti)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Cr)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Mo)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Ni)	-	12000	5% discount on complete testing charges is applicable for BIS.
6(Cr+ Mo+ Ni)	-	12000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

273

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	9800	Complete Testing Charges
Cl 9(Press)	-	9800	Complete Testing Charges
Cl 10(Die Press)	-	9800	Complete Testing Charges
Cl 12(Workmanship)	-	9800	Complete Testing Charges
Cl 13(Length, Width & Thickness)	-	9800	Complete Testing Charges
6.1(Carbon %)	-	9800	Complete Testing Charges
6.1(Manganese %)	-	9800	Complete Testing Charges
6.1(Phosphorus %)	-	9800	Complete Testing Charges
6.1(Silicon %)	-	9800	Complete Testing Charges
6.1( Copper %)	-	9800	Complete Testing Charges
6.1( Aluminium %)	-	9800	Complete Testing Charges
6.1( Nb)	-	9800	Complete Testing Charges
6.1(V)	-	9800	Complete Testing Charges
6.1( Ti)	-	9800	Complete Testing Charges
6.1(Cr)	-	9800	Complete Testing Charges
6.1(Mo)	-	9800	Complete Testing Charges
6.1(Ni)	-	9800	Complete Testing Charges
6.1( Nitrogen%)	-	9800	Complete Testing Charges
6.1(Microalloying)	-	9800	Complete Testing Charges

Complete

25 Feb, 2027

-
-

274

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	9800	Complete Testing Charges
Cl 6.2(Diameter & Ovality)	-	9800	Complete Testing Charges
Cl 6.2(Weight)	-	9800	Complete Testing Charges
Cl 8.2(Bend test)	-	9800	Complete Testing Charges
Cl 9.3(Press)	-	9800	Complete Testing Charges

Complete

25 Feb, 2027

-
-

275

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	100	5% discount on complete testing charges is applicable for BIS.
4.1.2(Manufacture)	-	100	5% discount on complete testing charges is applicable for BIS.
4.1.3(Manufacture)	-	100	5% discount on complete testing charges is applicable for BIS.
4.1.4(Manufacture)	-	100	5% discount on complete testing charges is applicable for BIS.
4.2(Dimensions Fig 1 and Table 1)	-	500	5% discount on complete testing charges is applicable for BIS.
4.3(Thickness)	-	500	5% discount on complete testing charges is applicable for BIS.
4.4.1(Physical Properties)	-	1500	5% discount on complete testing charges is applicable for BIS.
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	4000	5% discount on complete testing charges is applicable for BIS.
4.4.3(After heat ageing in autoclave)	-	3500	5% discount on complete testing charges is applicable for BIS.
4.4.4(Tension Set)	-	1200	5% discount on complete testing charges is applicable for BIS.
4.5(pH of Aqueous Extract )	-	800	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

276

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	100	On complete testing 5% discount offer to BIS.
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	500	On complete testing 5% discount offer to BIS.
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	1000	On complete testing 5% discount offer to BIS.
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	1000	On complete testing 5% discount offer to BIS.
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	On complete testing 5% discount offer to BIS.
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	On complete testing 5% discount offer to BIS.
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	On complete testing 5% discount offer to BIS.
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	1500	On complete testing 5% discount offer to BIS.
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1500	On complete testing 5% discount offer to BIS.
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1500	On complete testing 5% discount offer to BIS.
3.4-Table 1(vi)(Compression set)	-	800	On complete testing 5% discount offer to BIS.
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	800	On complete testing 5% discount offer to BIS.
Clause 4.3 Table 1(Zinc oxide)	-	800	On complete testing 5% discount offer to BIS.
Clause 3.4 Table 1(Heavy metal content)	-	800	On complete testing 5% discount offer to BIS.
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	1500	On complete testing 5% discount offer to BIS.

Complete

25 Feb, 2027

-
-

277

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	8000		5% discount offered to BIS on complete Testing charges .
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	8000		5% discount offered to BIS on complete Testing charges .

Complete

25 Feb, 2027

-
Rs.8000/-(5% discount to BIS)

278

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

3100 View breakup
Rs.3100/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	5% discount offered to BIS on complete Testing charges .

Complete

25 Feb, 2027

-
REVISED VERWION OF IS 9873 PT-3):2020 INCLUDED W.E.F. 20-07-2021.

279

IS 737 (2008)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

all

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	14900	-
6 Table-1(Al)	-	14900	-
6 Table-1(Cu)	-	14900	-
6 Table-1(Mg)	-	14900	-
6 Table-1(Si)	-	14900	-
6 Table-1(Fe)	-	14900	-
6 Table-1(Mn)	-	14900	-
6 Table-1(Zn)	-	14900	-
6 Table-1(Ti)	-	14900	-
6 Table-1(Cr)	-	14900	-
6 Table-1(Cu+Si+Fe)	-	14900	-
6 Table-1(Cu+Si+Fe+Mn+Zn)	-	14900	-
6 Table-1(Cu+Mg+Si+Fe+Mn+Zn)	-	14900	-
6 Table-1(Zr)	-	14900	-
6 Table-1(Cr+Mn)	-	14900	-
7 Table-2(Tensile Strength)	-	14900	-
7 Table-2(Elongation)	-	14900	-
7 Table-2(0.2 % Proof Stress)	-	14900	-
7 Table-2(Bend Test)	-	14900	-
9(Dimension - IS 2676)	-	14900	-
12(Marking)	-	14900	-

Complete

25 Feb, 2027

-
-

280

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

all

13000 View breakup
-

Clause No.	Exclusion	Remark
3, 4(Type of Flask)	-	-
3.1, 4.1(Series of Nominal Capacity)	-	-
3.2, 4.2(Nominal Capacity )	-	-
3.3, 4.3(Material )	-	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	-
3.5.2(Neck Length)	-	-
3.5.3, 4.5.2(Dimensions of base )	-	-
3.5.4, 4.5.3(Wall thickness)	-	-
5(Marking )	-	-
3, 4(Type of Flask)	-	-
3.1, 4.1(Series of Nominal Capacity)	-	-
3.2, 4.2(Nominal Capacity )	-	-
3.3, 4.3(Material )	-	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	-
3.5.2(Neck Length)	-	-
3.5.3, 4.5.2(Dimensions of base )	-	-
3.5.4, 4.5.3(Wall thickness)	-	-
5(Marking )	-	-

Complete

25 Feb, 2027

-
-

281

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

50800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	50800	-
Cl-5.3(Material)	-	50800	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	50800	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	50800	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	50800	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	50800	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	50800	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	50800	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	50800	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	50800	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	50800	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	50800	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	50800	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	50800	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	50800	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	50800	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	50800	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	50800	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	50800	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	50800	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	50800	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	50800	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	50800	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	50800	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	50800	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	50800	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	50800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	50800	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	50800	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	50800	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	50800	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	50800	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	50800	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	50800	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	50800	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	50800	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	50800	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	50800	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	50800	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	50800	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	50800	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	50800	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	50800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	50800	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	50800	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	50800	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	50800	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	50800	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	50800	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	50800	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	50800	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	50800	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	50800	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	50800	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	50800	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	50800	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	50800	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	50800	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	50800	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	50800	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	50800	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	50800	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	50800	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	50800	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	50800	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	50800	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	50800	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	50800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	50800	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	50800	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	50800	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	50800	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	50800	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	50800	-
Cl-8.1(Marking)	-	50800	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	50800	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	50800	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	50800	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	50800	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	50800	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	50800	-

Complete

25 Feb, 2027

-
Included w.e.f. 10.04.2024

282

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

50800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	50800	-
Cl-4.3.1(Size)	-	50800	-
Cl-4.3.2(Weight)	-	50800	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	50800	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	50800	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	50800	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	50800	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	50800	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	50800	-
Cl-4.6.1(Material)	-	50800	-
Cl-4.6.2(Tear Strength)	-	50800	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	50800	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	50800	-
Cl-4.7.1(Material)	-	50800	-
Cl-4.7.2(Tear Strength)	-	50800	-
Cl-4.7.3(Abrasion Resistance)	-	50800	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	50800	-
Cl. 4.8.1(Material)	-	50800	-
Cl-4.8.2(Abrasion Resistance)	-	50800	-
Cl-4.8.3(Water Absorption and Desorption)	-	50800	-
Cl-4.9.3(Abrasion Resistance)	-	50800	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	50800	-
Cl-4.11.1(Material)	-	50800	-
Cl-4.11.2(Tear Strength)	-	50800	-
Cl-4.12(Closing Thread)	-	50800	-
Cl-4.13.2(Thickness)	-	50800	-
Cl-4.13.3(Moulded Density)	-	50800	-
Cl-4.13.4(Hardness)	-	50800	-
Cl-4.13.5(Ageing Test)	-	50800	-
Cl-4.13.6(Tear Strength)	-	50800	-
Cl-4.13.7(Abrasion Resistance)	-	50800	-
Cl-4.13.8(Flexing Resistance)	-	50800	-
Cl-4.14(Eyelet)	-	50800	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	50800	-
Cl-5(Chemical Requirements)	-	50800	-
Cl-7(Marking)	-	50800	-
Cl-4.4(Height of Upper)	-	50800	-
Cl-4.2(Design)	-	-	-
Cl-4.3.1(Size)	-	-	-
Cl-4.3.2(Weight)	-	-	-
Cl-4.4(Height of Upper)	-	-	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	-	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	-	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	-	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	-	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	-	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	-	-
Cl-4.6.1(Material)	-	-	-
Cl-4.6.2(Tear Strength)	-	-	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	-	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	-	-
Cl-4.7.1(Material)	-	-	-
Cl-4.7.2(Tear Strength)	-	-	-
Cl-4.7.3(Abrasion Resistance)	-	-	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	-	-
Cl. 4.8.1(Material)	-	-	-
Cl-4.8.2(Abrasion Resistance)	-	-	-
Cl-4.8.3(Water Absorption and Desorption)	-	-	-
Cl-4.9.3(Abrasion Resistance)	-	-	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	-	-
Cl-4.11.1(Material)	-	-	-
Cl-4.11.2(Tear Strength)	-	-	-
Cl-4.12(Closing Thread)	-	-	-
Cl-4.13.2(Thickness)	-	-	-
Cl-4.13.3(Moulded Density)	-	-	-
Cl-4.13.4(Hardness)	-	-	-
Cl-4.13.5(Ageing Test)	-	-	-
Cl-4.13.6(Tear Strength)	-	-	-
Cl-4.13.7(Abrasion Resistance)	-	-	-
Cl-4.13.8(Flexing Resistance)	-	-	-
Cl-4.14(Eyelet)	-	-	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	-	-
Cl-5(Chemical Requirements)	-	-	-
Cl-7(Marking)	-	-	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	-	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	-	-
Cl.4.5.3.2(Interlayer bond strength)	-	-	-
Cl-4.9.1(Material)	-	-	-
Cl-4.9.2(Water Absorption and Desorption)	-	-	-
Cl-4.13.1(Material)	-	-	-

Complete

25 Feb, 2027

-
Included w.e.f. 10.04.2024

283

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

ALL

33900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	33900	-
5.3(Manufacture and Workmanship)	-	33900	-
7.1(Material)	-	33900	-
7.1.2(Thickness)	-	33900	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	33900	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	33900	-
7.1.2.8(Bisphenol A(BPA))	-	33900	-
7.3(Capacity)	-	33900	-
7.4(Heat Retention Capability)	-	33900	-
7.5(Cold Retention Capability)	-	33900	-
7.6.1(Drop Impact Test)	-	33900	-
7.6.2(Pendulum Impact Test)	-	33900	-
7.7(Fixing Strength of the Handle)	-	33900	-
7.8(Test for Strength of Shoulder Strap)	-	33900	-
7.9(Leakage Test)	-	33900	-
7.10(Joint Leak Test)	-	33900	-
7.11(Staining Test)	-	33900	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	33900	-
7.13.1(Length of the Shoulder Strap)	-	33900	-
7.13.2(Stability of Insulated Container)	-	33900	-
7.13.3(Cleaning)	-	33900	-
7.14(Seepage Test)	-	33900	-
9.1(Marking)	-	33900	-
9.2(BIS certification marking)	-	33900	-
10(Packaging)	-	33900	-
CLAUSE 5.2(Welding Defects)	-	33900	-
CLAUSE 7.1(Materials)	-	33900	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	33900	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	33900	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	33900	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	33900	-
CLAUSE 7.1.2.1(Adhesion Test)	-	33900	-
CLAUSE 7.1.2.1(Lead Limit)	-	33900	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	33900	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	33900	-
CLAUSE 7.3(Capacity)	-	33900	-
CLAUSE 7.4(Heat Retention Capability)	-	33900	-
CLAUSE 7.5(Cold Retention Capability)	-	33900	-
CLAUSE 7.6.1(Drop Impact)	-	33900	-
CLAUSE 7.6.2(Pendulum Impact)	-	33900	-
CLAUSE 7.7(Fixing Strength of Handle)	-	33900	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	33500	-
CLAUSE 7.9(Leakage Test)	-	33900	-
CLAUSE 7.10(Joint Leak Test)	-	33900	-
CLAUSE 7.11(Staining Test)	-	33900	-
CLAUSE 7.12(Checking of PUF insulation)	-	33900	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	33900	-
CLAUSE 7.13.2(Stability of Flask)	-	33900	-
CLAUSE 7.1.1(Material - inner container)	-	33900	-
5(Manufacture and Workmanship)	-	33900	-
5.3(Manufacture and Workmanship)	-	33900	-
7.1(Material)	-	33900	-
7.1.2(Thickness)	-	33900	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	33900	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	33900	-
7.1.2.8(Bisphenol A(BPA))	-	33900	-
7.3(Capacity)	-	33900	-
7.4(Heat Retention Capability)	-	33900	-
7.5(Cold Retention Capability)	-	33900	-
7.6.1(Drop Impact Test)	-	33900	-
7.6.2(Pendulum Impact Test)	-	33900	-
7.7(Fixing Strength of the Handle)	-	33900	-
7.8(Test for Strength of Shoulder Strap)	-	33900	-
7.9(Leakage Test)	-	33900	-
7.10(Joint Leak Test)	-	33900	-
7.11(Staining Test)	-	33900	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	33900	-
7.13.1(Length of the Shoulder Strap)	-	33900	-
7.13.2(Stability of Insulated Container)	-	33900	-
7.13.3(Cleaning)	-	33900	-
7.14(Seepage Test)	-	33900	-
9.1(Marking)	-	33900	-
9.2(BIS certification marking)	-	33900	-
10(Packaging)	-	33900	-
CLAUSE 5.2(Welding Defects)	-	33900	-
CLAUSE 7.1(Materials)	-	33900	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	33900	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	33900	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	33900	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	33900	-
CLAUSE 7.1.2.1(Adhesion Test)	-	33900	-
CLAUSE 7.1.2.1(Lead Limit)	-	33900	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	33900	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	33900	-
CLAUSE 7.3(Capacity)	-	33900	-
CLAUSE 7.4(Heat Retention Capability)	-	33900	-
CLAUSE 7.5(Cold Retention Capability)	-	33900	-
CLAUSE 7.6.1(Drop Impact)	-	33900	-
CLAUSE 7.6.2(Pendulum Impact)	-	33900	-
CLAUSE 7.7(Fixing Strength of Handle)	-	33900	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	33900	-
CLAUSE 7.9(Leakage Test)	-	33900	-
CLAUSE 7.10(Joint Leak Test)	-	33900	-
CLAUSE 7.11(Staining Test)	-	33900	-
CLAUSE 7.12(Checking of PUF insulation)	-	33900	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	33900	-
CLAUSE 7.13.2(Stability of Flask)	-	33900	-
CLAUSE 7.1.1(Material - inner container)	-	33900	-
5(Manufacture and Workmanship)	-	-	-
5.3(Manufacture and Workmanship)	-	-	-
7.1(Material)	-	-	-
7.1.2(Thickness)	-	-	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	-	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	-	-
7.1.2.8(Bisphenol A(BPA))	-	-	-
7.3(Capacity)	-	-	-
7.4(Heat Retention Capability)	-	-	-
7.5(Cold Retention Capability)	-	-	-
7.6.1(Drop Impact Test)	-	-	-
7.6.2(Pendulum Impact Test)	-	-	-
7.7(Fixing Strength of the Handle)	-	-	-
7.8(Test for Strength of Shoulder Strap)	-	-	-
7.9(Leakage Test)	-	-	-
7.10(Joint Leak Test)	-	-	-
7.11(Staining Test)	-	-	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	-	-
7.13.1(Length of the Shoulder Strap)	-	-	-
7.13.2(Stability of Insulated Container)	-	-	-
7.13.3(Cleaning)	-	-	-
7.14(Seepage Test)	-	-	-
9.1(Marking)	-	-	-
9.2(BIS certification marking)	-	-	-
10(Packaging)	-	-	-
CLAUSE 5.2(Welding Defects)	-	-	-
CLAUSE 7.1(Materials)	-	-	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	-	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	-	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	-	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	-	-
CLAUSE 7.1.2.1(Adhesion Test)	-	-	-
CLAUSE 7.1.2.1(Lead Limit)	-	-	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	-	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	-	-
CLAUSE 7.3(Capacity)	-	-	-
CLAUSE 7.4(Heat Retention Capability)	-	-	-
CLAUSE 7.5(Cold Retention Capability)	-	-	-
CLAUSE 7.6.1(Drop Impact)	-	-	-
CLAUSE 7.6.2(Pendulum Impact)	-	-	-
CLAUSE 7.7(Fixing Strength of Handle)	-	-	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	-	-
CLAUSE 7.9(Leakage Test)	-	-	-
CLAUSE 7.10(Joint Leak Test)	-	-	-
CLAUSE 7.11(Staining Test)	-	-	-
CLAUSE 7.12(Checking of PUF insulation)	-	-	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	-	-
CLAUSE 7.13.2(Stability of Flask)	-	-	-
CLAUSE 7.1.1(Material - inner container)	-	-	-

Complete

25 Feb, 2027

-
-

284

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

ALL

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Manufacture)	-	9900	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	9900	-
Cl-6.2(Chemical analysis of the material)	-	9900	-
Cl-7.1(General condition for delivery and inspection relating)	-	9900	-
Cl-9(Ultimate tensile strength and elongation)	-	9900	-
Cl-10.1(Resistivity)	-	9900	-
Cl-10.1(electrical conductivity)	-	9900	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	9900	-
Cl-11(Dimensions)	-	9900	-
Cl-13(Finish and freedom from defects)	-	9900	-
Cl-14(Rejection and retest)	-	9900	-
Cl-16(Marking)	-	9900	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	9900	-
CL 11(DIMENSIONS)	-	9900	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	9900	-
9(Elongation)	-	9900	-
12(Joint)	-	9900	-
Cl-5(Manufacture)	-	9900	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	9900	-
Cl-6.2(Chemical analysis of the material)	-	9900	-
Cl-7.1(General condition for delivery and inspection relating)	-	9900	-
Cl-9(Ultimate tensile strength and elongation)	-	9900	-
Cl-10.1(Resistivity)	-	9900	-
Cl-10.1(electrical conductivity)	-	9900	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	9900	-
Cl-11(Dimensions)	-	9900	-
Cl-13(Finish and freedom from defects)	-	9900	-
Cl-14(Rejection and retest)	-	9900	-
Cl-16(Marking)	-	9900	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	9900	-
CL 11(DIMENSIONS)	-	9900	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	9900	-
9(Elongation)	-	9900	-
12(Joint)	-	9900	-
Cl-5(Manufacture)	-	9900	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	9900	-
Cl-6.2(Chemical analysis of the material)	-	9900	-
Cl-7.1(General condition for delivery and inspection relating)	-	9900	-
Cl-9(Ultimate tensile strength and elongation)	-	9900	-
Cl-10.1(Resistivity)	-	9900	-
Cl-10.1(electrical conductivity)	-	9900	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	9900	-
Cl-11(Dimensions)	-	9900	-
Cl-13(Finish and freedom from defects)	-	9900	-
Cl-14(Rejection and retest)	-	9900	-
Cl-16(Marking)	-	9900	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	9900	-
CL 11(DIMENSIONS)	-	9900	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	9900	-
9(Elongation)	-	9900	-
12(Joint)	-	9900	-

Complete

25 Feb, 2027

-
-

285

IS 210 (2009)

Grey iron castings - Specification (First Revision)

all

6500 View breakup
-

Clause No.	Exclusion	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
10.1(FREEDOM FROM DEFECTS)	-	-
10.2(FREEDOM FROM DEFECTS)	-	-
13(SIZE OF TEST BARS-Diameter)	-	-
13(SIZE OF TEST BARS-Length)	-	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	-
16, Table 3(Hardness Test)	-	-
17,Annex B(TRANSVERSE TEST)	-	-
18(HYDROSTATIC TEST)	-	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
10.1(FREEDOM FROM DEFECTS)	-	-
10.2(FREEDOM FROM DEFECTS)	-	-
13(SIZE OF TEST BARS-Diameter)	-	-
13(SIZE OF TEST BARS-Length)	-	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	-
16, Table 3(Hardness Test)	-	-
17,Annex B(TRANSVERSE TEST)	-	-
18(HYDROSTATIC TEST)	-	-
9(IS 7754)	-	-
9(IS 7754)	-	-
9(Microstructure)	-	-
21(Marking)	-	-
9(Microstructure)	-	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
10.1(FREEDOM FROM DEFECTS)	-	-
10.2(FREEDOM FROM DEFECTS)	-	-
13(SIZE OF TEST BARS-Diameter)	-	-
13(SIZE OF TEST BARS-Length)	-	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	-
16, Table 3(Hardness Test)	-	-
17,Annex B(TRANSVERSE TEST)	-	-
18(HYDROSTATIC TEST)	-	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
10.1(FREEDOM FROM DEFECTS)	-	-
10.2(FREEDOM FROM DEFECTS)	-	-
13(SIZE OF TEST BARS-Diameter)	-	-
13(SIZE OF TEST BARS-Length)	-	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	-
16, Table 3(Hardness Test)	-	-
17,Annex B(TRANSVERSE TEST)	-	-
18(HYDROSTATIC TEST)	-	-
9(IS 7754)	-	-
9(IS 7754)	-	-
9(Microstructure)	-	-
21(Marking)	-	-
9(Microstructure)	-	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
10.1(FREEDOM FROM DEFECTS)	-	-
10.2(FREEDOM FROM DEFECTS)	-	-
13(SIZE OF TEST BARS-Diameter)	-	-
13(SIZE OF TEST BARS-Length)	-	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	-
16, Table 3(Hardness Test)	-	-
17,Annex B(TRANSVERSE TEST)	-	-
18(HYDROSTATIC TEST)	-	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
10.1(FREEDOM FROM DEFECTS)	-	-
10.2(FREEDOM FROM DEFECTS)	-	-
13(SIZE OF TEST BARS-Diameter)	-	-
13(SIZE OF TEST BARS-Length)	-	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	-
16, Table 3(Hardness Test)	-	-
17,Annex B(TRANSVERSE TEST)	-	-
18(HYDROSTATIC TEST)	-	-
9(IS 7754)	-	-
9(IS 7754)	-	-
9(Microstructure)	-	-
21(Marking)	-	-
9(Microstructure)	-	-

Complete

25 Feb, 2027

-
-

286

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

all

8000 View breakup
-

Clause No.	Exclusion	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	-
10(Tensile test)	-	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	-

Complete

25 Feb, 2027

-
-

287

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

ALL

32400 View breakup
-

Clause No.	Exclusion	Remark
4.1(Gross capacity)	-	-
4.2(Body Capacity)	-	-
5.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body and Lid )	-	-
5.1.3(Stainless steel pressure cooker)	-	-
5.1.4(Aluminium cooker )	-	-
5.2(Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device )	-	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	-
5.7(Vent Pipe )	-	-
5.8(Vent Pipe Nut )	-	-
5.9(Spring )	-	-
5.1(Material of Rim )	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(Construction)	-	-
7(Workmanship and Finish )	-	-
8.1(Air Pressure Test )	-	-
8.2(Proof Pressure Test )	-	-
8.3(Operating Test for Pressure Regulating Device )	-	-
8.4(Test for Safety Relief Device )	-	-
8.5(Bursting Pressure Test )	-	-
8.6(Test for Removal of Lid under Pressure )	-	-
8.7(Test for Spring Loaded Mechanism )	-	-
8.8(Composite Cooker Base )	-	-
8.9(Aluminium induction compatible Base )	-	-
8.1(Handles of cooker )	-	-
8.11(External Coating)	-	-
8.12(Internal Coating )	-	-
8.13(Integral electrical heating)	-	-
8.14(Ply construction cooker Body )	-	-
8.15.1(Fragmentation Test )	-	-
8.15.2(Ball Drop Test )	-	-
8.15.3(Thermal Shock Test )	-	-
8.15.4(Free Fall Test)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
11(Marking )	-	-
12(Packing )	-	-
4(Capacity)	-	-
4.2(Body Capacity)	-	-
5.1.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body, Lid, Containers and Grid)	-	-
5.1.3(Body, Lid, Containers and Grid)	-	-
5.1.4(Body, Lid, Containers and Grid)	-	-
5.1.5(Body, Lid, Containers and Grid)	-	-
5.2.1(Destructive Type Safety Relief Device)	-	-
5.2.2(Resettable Type Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device)	-	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	-
5.7(Vent Pipe)	-	-
5.8(Vent Pipe Nut)	-	-
5.9(Spring)	-	-
5.10(Spring)	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(CONSTRUCTION)	-	-
6.1(Pressure Regulating Device)	-	-
6.1.1(Pressure Regulating Device)	-	-
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	-
6.1.2(Pressure Regulating Device)	-	-
6.1.3(Pressure Regulating Device)	-	-
6.1.4(Pressure Regulating Device)	-	-
6.1.5(Pressure Regulating Device)	-	-
6.1.6(Pressure Regulating Device)	-	-
6.2(Safety Relief Device)	-	-
6.2.1(Safety Relief Device)	-	-
6.2.2(Safety Relief Device)	-	-
6.2.3(Safety Relief Device)	-	-
6.3.1(Temperature Responsive Safety Relief Device)	-	-
6.3.2(Temperature Responsive Safety Relief Device)	-	-
6.3.3(Temperature Responsive Safety Relief Device)	-	-
6.4.1(Handles and Knobs)	-	-
6.4.1.1(Handles and Knobs)	-	-
6.4.2(Handles and Knobs)	-	-
6.4.2.1(Handles and Knobs)	-	-
6.5(CONSTRUCTION)	-	-
6.6(CONSTRUCTION)	-	-
6.7(Internal Level Marking)	-	-
6.8(Internal Level Marking)	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
7.2(WORKMANSHIP AND FINISH)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
8.16(PRD with chain)	-	-
8.15.4.2(Glass lid without rim)	-	-
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	-
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	-
8.15.2(Ball Drop Test on Tempered Glass lid)	-	-
8.15.1(Fragmentation Test on Tempered Glass lid)	-	-
8.14(3 ply construction cooker body)	-	-
8.13(Pressure cooker with integral electrical heating)	-	-
8.12(Internal Coating)	-	-
7.3(WORKMANSHIP AND FINISH)	-	-
7.4(WORKMANSHIP AND FINISH)	-	-
8.1(Air Pressure Test)	-	-
8.2(Proof Pressure Test)	-	-
8.3.1(Operating Test for Pressure Regulating Device)	-	-
8.4.1(Test for Safety Relief Device)	-	-
8.4.2(Test for Safety Relief Device)	-	-
8.4.2 NOTE(Test for Safety Relief Device)	-	-
8.5(Bursting Pressure Test)	-	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	-
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	-
8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-	-
8.7(Test for Spring Loaded Mechanism)	-	-
8.8(Test for stainless steel cookers)	-	-
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	-
8.10(Testing of Handles of the cooker)	-	-
8.10 Note 3(Testing of Handles of the cooker)	-	-
8.10 Note 4(Testing of Handles of the cooker)	-	-
8.10 Note 5(Testing of Handles of the cooker)	-	-
8.10 Note 6(Testing of Handles of the cooker)	-	-
8.10.1(Testing of Handles of the cooker)	-	-
8.11.1(External Coating)	-	-
4.1(Gross capacity)	-	-
4.2(Body Capacity)	-	-
5.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body and Lid )	-	-
5.1.3(Stainless steel pressure cooker)	-	-
5.1.4(Aluminium cooker )	-	-
5.2(Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device )	-	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	-
5.7(Vent Pipe )	-	-
5.8(Vent Pipe Nut )	-	-
5.9(Spring )	-	-
5.1(Material of Rim )	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(Construction)	-	-
7(Workmanship and Finish )	-	-
8.1(Air Pressure Test )	-	-
8.2(Proof Pressure Test )	-	-
8.3(Operating Test for Pressure Regulating Device )	-	-
8.4(Test for Safety Relief Device )	-	-
8.5(Bursting Pressure Test )	-	-
8.6(Test for Removal of Lid under Pressure )	-	-
8.7(Test for Spring Loaded Mechanism )	-	-
8.8(Composite Cooker Base )	-	-
8.9(Aluminium induction compatible Base )	-	-
8.1(Handles of cooker )	-	-
8.11(External Coating)	-	-
8.12(Internal Coating )	-	-
8.13(Integral electrical heating)	-	-
8.14(Ply construction cooker Body )	-	-
8.15.1(Fragmentation Test )	-	-
8.15.2(Ball Drop Test )	-	-
8.15.3(Thermal Shock Test )	-	-
8.15.4(Free Fall Test)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
11(Marking )	-	-
12(Packing )	-	-
4(Capacity)	-	-
4.2(Body Capacity)	-	-
5.1.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body, Lid, Containers and Grid)	-	-
5.1.3(Body, Lid, Containers and Grid)	-	-
5.1.4(Body, Lid, Containers and Grid)	-	-
5.1.5(Body, Lid, Containers and Grid)	-	-
5.2.1(Destructive Type Safety Relief Device)	-	-
5.2.2(Resettable Type Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device)	-	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	-
5.7(Vent Pipe)	-	-
5.8(Vent Pipe Nut)	-	-
5.9(Spring)	-	-
5.10(Spring)	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(CONSTRUCTION)	-	-
6.1(Pressure Regulating Device)	-	-
6.1.1(Pressure Regulating Device)	-	-
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	-
6.1.2(Pressure Regulating Device)	-	-
6.1.3(Pressure Regulating Device)	-	-
6.1.4(Pressure Regulating Device)	-	-
6.1.5(Pressure Regulating Device)	-	-
6.1.6(Pressure Regulating Device)	-	-
6.2(Safety Relief Device)	-	-
6.2.1(Safety Relief Device)	-	-
6.2.2(Safety Relief Device)	-	-
6.2.3(Safety Relief Device)	-	-
6.3.1(Temperature Responsive Safety Relief Device)	-	-
6.3.2(Temperature Responsive Safety Relief Device)	-	-
6.3.3(Temperature Responsive Safety Relief Device)	-	-
6.4.1(Handles and Knobs)	-	-
6.4.1.1(Handles and Knobs)	-	-
6.4.2(Handles and Knobs)	-	-
6.4.2.1(Handles and Knobs)	-	-
6.5(CONSTRUCTION)	-	-
6.6(CONSTRUCTION)	-	-
6.7(Internal Level Marking)	-	-
6.8(Internal Level Marking)	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
7.2(WORKMANSHIP AND FINISH)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
8.16(PRD with chain)	-	-
8.15.4.2(Glass lid without rim)	-	-
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	-
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	-
8.15.2(Ball Drop Test on Tempered Glass lid)	-	-
8.15.1(Fragmentation Test on Tempered Glass lid)	-	-
8.14(3 ply construction cooker body)	-	-
8.13(Pressure cooker with integral electrical heating)	-	-
8.12(Internal Coating)	-	-
7.3(WORKMANSHIP AND FINISH)	-	-
7.4(WORKMANSHIP AND FINISH)	-	-
8.1(Air Pressure Test)	-	-
8.2(Proof Pressure Test)	-	-
8.3.1(Operating Test for Pressure Regulating Device)	-	-
8.4.1(Test for Safety Relief Device)	-	-
8.4.2(Test for Safety Relief Device)	-	-
8.4.2 NOTE(Test for Safety Relief Device)	-	-
8.5(Bursting Pressure Test)	-	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	-
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	-
8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-	-
8.7(Test for Spring Loaded Mechanism)	-	-
8.8(Test for stainless steel cookers)	-	-
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	-
8.10(Testing of Handles of the cooker)	-	-
8.10 Note 3(Testing of Handles of the cooker)	-	-
8.10 Note 4(Testing of Handles of the cooker)	-	-
8.10 Note 5(Testing of Handles of the cooker)	-	-
8.10 Note 6(Testing of Handles of the cooker)	-	-
8.10.1(Testing of Handles of the cooker)	-	-
8.11.1(External Coating)	-	-

Complete

25 Feb, 2027

-
-

288

IS 4026 (2023)

ALUMINIUM INGOTS BILLETS AND WIRE BARS EC GRADE

ALL

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(SHAPES AND SIZES)	-	6000	-
9, Table 1, i)(Aluminium, Min)	-	6000	-
9, Table 1, ii)(Silicon)	-	6000	-
9, Table 1, iii)(Iron)	-	6000	-
9, Table 1, iv)(Copper)	-	6000	-
9, Table 1, v)(Manganese)	-	6000	-
9, Table 1, vi)(Magnesium)	-	6000	-
9, Table 1, vii)(Chromium)	-	6000	-
9, Table 1, viii)(Zinc)	-	6000	-
9, Table 1, ix)(Titanium)	-	6000	-
9, Table 1, x)(Boron)	-	6000	-
9, Table 1, xi)(Gallium)	-	6000	-
9, Table 1, xii)(Zirconium)	-	6000	-
9, Table 1, xiii)(Titanium + Vanadium)	-	6000	-
9, Table 1, xiv)(Other elements (each))	-	6000	-
9, Table 1, xv)(Other elements (Total))	-	6000	-
8(SHAPES AND SIZES)	-	6000	-
9, Table 1, i)(Aluminium, Min)	-	6000	-
9, Table 1, ii)(Silicon)	-	6000	-
9, Table 1, iii)(Iron)	-	6000	-
9, Table 1, iv)(Copper)	-	6000	-
9, Table 1, v)(Manganese)	-	6000	-
9, Table 1, vi)(Magnesium)	-	6000	-
9, Table 1, vii)(Chromium)	-	6000	-
9, Table 1, viii)(Zinc)	-	6000	-
9, Table 1, ix)(Titanium)	-	6000	-
9, Table 1, x)(Boron)	-	6000	-
9, Table 1, xi)(Gallium)	-	6000	-
9, Table 1, xii)(Zirconium)	-	6000	-
9, Table 1, xiii)(Titanium + Vanadium)	-	6000	-
9, Table 1, xiv)(Other elements (each))	-	6000	-
9, Table 1, xv)(Other elements (Total))	-	6000	-
3.3.1.(Thiram Content - IS 4320:2024)	-	4500	-

Complete

25 Feb, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List