BIS - LIMS (Laboratory Information Management System)

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List

Reset

288 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

241

IS 5295 (2021)

Ethylene Glycol - Specification (Second Revision)

Fibre grade and general grade

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Free from suspended matter)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Colour, Hazen units/Pt-Co, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Relative density1) at 20/20 °C)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Distillation range at 760 mm Hg (a) Initial boiling point, °C Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2 (Chem)(Distillation range at 760 mm Hg (b) The temperature at which 95 ml of material shall distil, °C, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Moisture content, percent by mass, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Acidity (as acetic acid), ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at b) 275 nm, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at c) 350 nm, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Freezing point of equal volumes of material and water, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Iron content, ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Chlorides content (as Cl), ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Diethylene glycol content, ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Purity, percent, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Aldehyde as CH3CHO or HCHO, ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.

Complete

25 Feb, 2027

-
Included w.e.f. 07.10.2022

242

IS 4566 (2020)

Specification For Methylene Chloride ( Dichloromethane ) — Technical ( Second Revision

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Description)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(i)(Relative density at 27/27°C)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(ii)(Distillation range at a pressure of 1 bar (optional for grade 1))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(iii)(Residue on evapouration)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(iv)(Moisture)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(v)(Acidity (as Hcl))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(vi)(Free Chlorine)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(vii)(Aldehydes)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(viii)(Iron (as Fe))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(ix)(Heavy metals (as Pb))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(x)(Resistance to potassium permanganate)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xi)(Nesslers reagent)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xii)(Resistance to sulphuric acid)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xiii)(Total impurities due to methyl chloride and chloroform)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xiv)(Purity)	-	19800	Complete Testing Charges

Complete

25 Feb, 2027

-
Included w.e.f. 07.10.2022

243

IS 5158 (1987)

Specification for phthalic anhydride,technical - (Second Revision)

10250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	10250	-
4.1(Packing)	-	10250	-
4.2(Marking)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 1(Crystallizing point, °C, Annex A2)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 2("Colour of the molten material, Hazen unit, Annex A3")	-	10250	-
0.2 & 2.2- Table -1, Sl no. 3(Colour of the molten material after heat treatment, Hazen unit, Annex A3)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 4(Free acidity, percent by mass, Annex A4)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 5(Total available acidity, percent by mass, Annex A5)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 6("Maleic anhydride and other oxidizable impurities, percent by mass of Annex A6")	-	10250	-
0.2 & 2.2- Table -1, Sl no. 7(Ash, ppm of Annex A7)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 8(Iron ( as Fe ), ppm, Annex A8)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 9(Naphthaquinone, ppm, Annex A9)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 10(Naphthalene, ppm, Annex A10)	-	10250	-

Complete

25 Feb, 2027

-
Included w.e.f. 07.10.2022

244

IS 798 (2020)

Orthophosphoric Acid — Specification ( Third Revision )

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	14400	Complete Testing Charges
5.2.2 Table 1 (i)(Relative density )	-	14400	Complete Testing Charges
5.2.2 Table 1 (ii)(Orthophosphoric acid (H3 PO4 ))	-	14400	Complete Testing Charges
5.2.2 Table 1 (iii)(Iron (as Fe), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (iv)(Chlorides (as Cl), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (v)(Sulphates (as SO4 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (vi)(Arsenic (as As2 O3 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (vii)(Antimony (as Sb2 O3 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (viii)(Nitrates (as NO3 ),)	-	14400	Complete Testing Charges
5.2.2 Table 1 (ix)(Lead (as Pb), parts per million, Max)	-	14400	Complete Testing Charges
5.2.2 Table 1 (x)(Silica (as SiO2 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xi)(Calcium (as Ca) and Magnesium (as Mg), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xii)(Oxygen absorbed (as O),)	-	14400	Complete Testing Charges
5.2.2 Table 1 (xiii)(Volatile acids)	-	14400	Complete Testing Charges
5.2.2 Table 1 (xiv)(Manganese (as Mn), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xv)(Molybdenum (as Mo), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xvi)(Mercury (as Hg), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xvii)(Aluminium (as Al), )	-	14400	Complete Testing Charges

Complete

25 Feb, 2027

-
Included w.e.f. 07.10.2022

245

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1( Description)	-	11000	-
Cl No 3.2(Miscibility with Water)	-	11000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	11000	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	11000	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	11000	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	11000	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	11000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	11000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	11000	-

Complete

25 Feb, 2027

-
Included w.e.f. 07.10.2022

246

IS 15030 (2001)

Terephthalic acid - Specification

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1(Description)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(i) ] Annex A Ref to IS 2362(Moisture content)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(ii) ] Annex B(Colour)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(iii) ] Annex C(Ash content,)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(iv) ] Annex D(Acid value)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(v) ] Annex E & Annex J(Total of iron, cobalt, manganese and chromium)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J(Total of sodium, magnesium, potassium, calcium and Nickel)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(vii) ] Annex G Method A and C (4-carboxybenzaldehyde)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(viii) ] Annex G Method A and B(p-toluic acid,)	-	20500	-
Cl No 3.3(Particle Size)	-	20500	-

Complete

25 Feb, 2027

-
Included w.e.f. 07.10.2022

247

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	4566	-
5.2.1.2(MFI)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at yield)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at yield)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at break)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec7)(Flexural modulas)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec23)(Tear Strength)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec6)(Dart Impact strength)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec4)(Izod/Charpy impact strength)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec11)(Shore Aor D hardness)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 11/Sec1)(Coeffiicient of friction)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 6/Sec3)(Heat deflection temperature)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 6/Sec1)(Vicat softening temperature)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 6/Sec11)(Brittleness Temperature)	-	4566	-
Annex B of IS 4984 5.3.2 Table6(Oxidation induction time)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	10500	-
IS 3396(Surface resistivity)	-	4566	-
IS 3397(Volume resistivity)	-	4566	-
IS2584(Dielectric strength)	-	4566	-
IS 4486(Dissipation factor)	-	4566	-
IS 4486(Relative permittivity)	-	4566	-
5.5.6 IS 2530(Carbon black dispersion)	-	4566	-
5.4.3 10 ofIS 2530(Carbon black content)	-	4566	-
5.4.35 15 ofIS 2530(Colour fastness to daylight)	-	4566	-
5.4.2 13 ofIS 2530(Colour fastness to water)	-	4566	-
IS 13360(part8/Sec1)(Water absorption)	-	4566	-
5.4.1 12 of IS 2530(Colour bleeding)	-	4566	-
IS 13360(part 8/Sec9)(ESCR)	-	4566	-
IS 13360(part 9/Sec10)(Colour bleeding)	-	4566	-
Annex C of IS4984(Volatile content)	-	4566	-
IS13360(part8/sec 6/ASTMD 1434(Gas permeability)	-	4566	-
ISO 51505-2(Oxygen gas transmission rate)	-	4566	-
ISO 2528(Water vopour transmission rate)	-	4566	-
IS 13360(part 9/Sec9)/ASTME313(Yellowness index or whiteness index)	-	4566	-
4 of IS 7016 (part 8)(Oven ageing)	-	4566	-
IS 13360(part 9/Sec8)(Transparency)	-	4566	-
IS15827(Natural/artificial weathering)	-	4566	-
IS 13360(part 9/Sec7)(Specular gloss)	-	4566	-

Complete

25 Feb, 2027

-
Excluding- Cl 5.3.2, table 6 (iv(d)) Gas permeability test, Cl 5.3.2, table 6 (iv(e)) Oxygen Gas Transmission rate test and Cl 5.3.2, table 6 (iv(f)) Water Vapour rate test . Included w.e.f. 07.10.2022

248

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	9800	Complete testing charges
Cl 8.2(Press)	-	9800	Complete testing charges
Cl 10(Galvanising Test)	-	9800	Complete testing charges
Cl 13(Weight)	-	9800	Complete testing charges
Cl 14(Length, Width & Thickness)	-	9800	Complete testing charges
Cl 12(Workmanship)	-	9800	Complete testing charges
5.1(carbon)	-	9800	Complete testing charges
5.1(silicon )	-	9800	Complete testing charges
5.1(manganese)	-	9800	Complete testing charges
5.1(sulphur)	-	9800	Complete testing charges
5.1(phosphorus)	-	9800	Complete testing charges
5.1(Titanium)	-	9800	Complete testing charges
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	9800	Complete testing charges
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	9800	Complete testing charges
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	9800	Complete testing charges
cl 5.1, T-1, Note-3(N2)	-	9800	Complete testing charges
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	9800	Complete testing charges
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	9800	Complete testing charges
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	9800	Complete testing charges
7.4(Mass of Coating: Single Spot Test)	-	9800	Complete testing charges
7.4(Mass of Coating: Triple Spot Test)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 550(P)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 550(S)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 550(Mn)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 550(C)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 450(C)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 450(Mn)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 450(S)	-	9800	Complete testing charges
cl 5.1, T-1, designation For GP 450(P)	-	9800	Complete testing charges
Cl. 9(Surface roughness)	-	9800	Complete testing charges
Cl 14(Length, Width & Thickness)	-	9800	Complete testing charges
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Pitch of Corrugation))	-	9800	Complete testing charges
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Depth of Corrugation))	-	9800	Complete testing charges
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	9800	Complete testing charges
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	9800	Complete testing charges
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	9800	Complete testing charges
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	9800	Complete testing charges
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	9800	Complete testing charges
Cl.12(Freedom from defects)	-	9800	Complete testing charges

Complete

25 Feb, 2027

-
-

249

IS 14549 (1998)

Hexaconazole, technical - Specification

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (g), Table 1 (i), Annex-A(Hexaconazole Content)	-	4500		5% discount to BIS

Complete

25 Feb, 2027

-
-

250

IS 8445 (1991)

Pesticide - Carbendazim (MBC), technical - Specification (First Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4(Packaging)	-	4500		Complete Testing Charges

Complete

25 Feb, 2027

-
-

251

IS 14509 (1997)

Lambda - Cyhalothrin, technical - Specification

3950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4(Packaging)	-	3950		5% discount to BIS

Complete

25 Feb, 2027

-
-

252

IS 12502 (1988)

Specification for glyphosate, technical

4550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Packaging)	-	4550	5% discount on complete testing charges is applicable for BIS.
3.2(Marking)	-	4550	5% discount on complete testing charges is applicable for BIS.
5.2 Quality of Reagent(Unless specified otherwise, pure chemicals shall be employed in tests and distilled water ( see IS : 1070-1977t ) shall be used where its use as a reagent is intended)	-	4550	5% discount on complete testing charges is applicable for BIS.
5.1 Test(Test shall be carried out in accordnace with 2.1, 2.2 and col 4 & 5 of table1)	-	4550	5% discount on complete testing charges is applicable for BIS.
2.2 Table-1 iv) moisture content(Clause no. 4 of IS 6940:1982)	-	4550	5% discount on complete testing charges is applicable for BIS.
2.2 Table-1 iii) Chloride (as NaCl)(Appendix B IS 12503)	-	4550	5% discount on complete testing charges is applicable for BIS.
2.2 Table-1 ii) Extra Acidity/Total acidity(Appendix A-2 IS 12502)	-	4550	5% discount on complete testing charges is applicable for BIS.
2.2 Table-1 i) Glyphosate content(Appendix A IS 12502)	-	4550	5% discount on complete testing charges is applicable for BIS.
2.1 Description(The material shall consist of N-Phosphonomethyl glycine and shall be in the form of white to off white powder)	-	4550	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

253

IS 15182 (2002)

Propiconazole EC - Specification

3850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.2.2(Cold Test)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.2.3(Flash Point (Abel))	-	3850	5% discount on complete testing charges is applicable for BIS.
3.2.4(Emulsion Stability)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.3.1(Pretilachlor content)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.3.2(Acidity)	-	3850	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

254

IS 15160 (2002)

Pretilachlor emulsifiable concentrate - specification

2400 View breakup
Rs.2400/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	2400	5% discount on complete testing charges is applicable for BIS.
3.2.2(Cold Test)	-	2400	5% discount on complete testing charges is applicable for BIS.
3.2.3(Flash Point (Abel))	-	2400	5% discount on complete testing charges is applicable for BIS.
3.2.4(Emulsion Stability)	-	2400	5% discount on complete testing charges is applicable for BIS.
3.3.1(Pretilachlor content)	-	2400	5% discount on complete testing charges is applicable for BIS.
3.3.2(Acidity)	-	2400	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

255

IS 14510 (1997)

Lambda - Cyhalothrin WP - Specification

3950 View breakup
Rs.3950/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	3950	5% discount on complete testing charges is applicable for BIS.
3.3 Table 1 i(Lamda cyhalothrin content )	-	3950	5% discount on complete testing charges is applicable for BIS.
3.3 Table 1 ii(Sieving requirements material passing through 75 micron IS sieve)	-	3950	5% discount on complete testing charges is applicable for BIS.
3.3 Table 1 iii(Suspensibility)	-	3950	5% discount on complete testing charges is applicable for BIS.
3.3 Table 1 iv(Wettability)	-	3950	5% discount on complete testing charges is applicable for BIS.
3.3 Table 1 v(Acidity/Alkalinity)	-	3950	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

256

IS 15240 (2002)

Profenofos emulsifiable concentrate - Specification

3850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.2.2(Cold Test)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.2.3(Flash Point (Abel))	-	3850	5% discount on complete testing charges is applicable for BIS.
3.2.4(Emulsion Stability)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.3.1( Profenofos Content)	-	3850	5% discount on complete testing charges is applicable for BIS.
3.3.2(Acidity)	-	3850	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

257

IS 13457 (1992)

Pesticide - Deltamethrin WP specification

5450 View breakup
Rs.5450/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	5450	Complete Testing Charges
Cl. 3.3&3.3.1 Table 1(Deltamethrin content, )	-	5450	Complete Testing Charges
Cl. 3.3 Table 1(Sieving (material passing through 45 Micron IS Sieve),)	-	5450	Complete Testing Charges
Cl. 3.3 Table 1(Suspensibility, )	-	5450	Complete Testing Charges
Cl. 3.3 Table 1(Acidity (as H2SO4), or Alkalinity (as NaOH))	-	5450	Complete Testing Charges
Cl. 3.3 Table 1(Wettability )	-	5450	Complete Testing Charges

Complete

25 Feb, 2027

-
-

258

IS 8963 (2006)

Chlorpyrifos, technical - (First Revision) specification

1150 View breakup
Rs.1150/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 Table 1(Water content)	-	1150	5% discount on complete testing charges is applicable for BIS.
3.2 Table 1(Acidity)	-	1150	5% discount on complete testing charges is applicable for BIS.
3.2 Table 1(Material insoluble in acetone)	-	1150	5% discount on complete testing charges is applicable for BIS.
3.2 Table 1(Chlorpyrifos content)	-	1150	5% discount on complete testing charges is applicable for BIS.
3.1(Description )	-	1150	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

259

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

1000 View breakup
Rs.1000/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	1000	5% discount on complete testing charges is applicable for BIS.
3.2.2(Cold Test)	-	1000	5% discount on complete testing charges is applicable for BIS.
3.2.3(Flash Point (Abel))	-	1000	5% discount on complete testing charges is applicable for BIS.
3.2.4(Emulsion Stability)	-	1000	5% discount on complete testing charges is applicable for BIS.
3.3.1(Chloropyrifos content)	-	1000	5% discount on complete testing charges is applicable for BIS.
3.3.2(Acidity (as H2SO4), )	-	1000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

260

IS 8446 (1991)

Pesticide - Carbendazim (MBC) WP - Specification (First Revision)

3200 View breakup
Rs.3200/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	3200	5% discount on complete testing charges is applicable for BIS.
3.3 table 1(Material passing through 75 micron IS sieve)	-	3200	5% discount on complete testing charges is applicable for BIS.
3.3 table 1(suspensibility)	-	3200	5% discount on complete testing charges is applicable for BIS.
3.3 table 1(Acidity (as H2SO4), or Alkalinity (as NaOH) )	-	3200	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

261

IS 6444 (1979)

Specification for sulphur dusting powders (First Revision)

1100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2 Table 1(Sulphur Content, NV upto 9)	-	1100	5% discount on complete testing charges is applicable for BIS.
2.2 Table 1(Sulphur Content, NV Above 9 below 50)	-	1100	5% discount on complete testing charges is applicable for BIS.
2.2 Table 1(Sulphur Content, NV above 50)	-	1100	5% discount on complete testing charges is applicable for BIS.
2.2 Table 1(Material passing through 75 micron sieve)	-	1100	5% discount on complete testing charges is applicable for BIS.
2.1(Description)	-	1100	5% discount on complete testing charges is applicable for BIS.
2.2 Table 1(Bulk Density after compacting)	-	1100	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

262

IS 15962 (2012)

Structural steels for buildings and structures with improved seismic resistance

40000 View breakup
Rs.40000/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Freedom from Defects)	-	40000	5% discount on complete testing charges is applicable for BIS.
Cl 7(Grades)	-	40000	5% discount on complete testing charges is applicable for BIS.
Cl 10(Tensile Test)	-	40000	5% discount on complete testing charges is applicable for BIS.
Cl 11(Impact Test)	-	40000	5% discount on complete testing charges is applicable for BIS.
Cl 13(Dimensions)	-	40000	5% discount on complete testing charges is applicable for BIS.
Cl 16(Mass)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E250S, C)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E250S, Mn )	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E250S, P)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E250S, S)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E250S, Si)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E250S, CE)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E300S, C)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E300S, Mn)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E300S, P)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E300S, S)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E300S, Si)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E300S, CE)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E450S, C)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E450S, Mn)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E450S, P)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E450S, Si)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E450S, CE)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E350S, C)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E350S, Mn)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E350S, P)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E350S, S)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E350S, Si)	-	40000	5% discount on complete testing charges is applicable for BIS.
Clauses 7, 8.1 & .2, Table- 1(E350S, CE)	-	40000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

263

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	9800	Complete Testing Charges
Cl 9 & Table 2(Workmanship)	-	9800	Complete Testing Charges
Cl 10(Coating Adhesion )	-	9800	Complete Testing Charges
Cl 12(Weight)	-	9800	Complete Testing Charges
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	9800	Complete Testing Charges

Complete

25 Feb, 2027

-
-

264

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	11000	5% discount on complete testing charges is applicable for BIS.
Cl 9(Press)	-	11000	5% discount on complete testing charges is applicable for BIS.
Cl 11(Workmanship)	-	11000	5% discount on complete testing charges is applicable for BIS.
Cl 12(Length, Width & Thickness)	-	11000	5% discount on complete testing charges is applicable for BIS.
Cl 13(Workmanship)	-	11000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

265

IS 11587 (1986)

Specification for structural weather resistant steels

25000 View breakup
Rs.25000/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades)	-	25000	5% discount on complete testing charges is applicable for BIS.
Cl 8(Tensile Test)	-	25000	5% discount on complete testing charges is applicable for BIS.
Cl 9(Bend Test)	-	25000	5% discount on complete testing charges is applicable for BIS.
Cl 10(Impact Test)	-	25000	5% discount on complete testing charges is applicable for BIS.
Cl 11(Flattening Test)	-	25000	5% discount on complete testing charges is applicable for BIS.
Cl 12(Freedom from Defects)	-	25000	5% discount on complete testing charges is applicable for BIS.
Cl 13(Dimensions)	-	25000	5% discount on complete testing charges is applicable for BIS.
Cl 16(Mass)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 500, C)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 500, Si)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 500, P)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 500, S)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	25000	5% discount on complete testing charges is applicable for BIS.
Clause 5.1, Table -1(WR-Fe 500, V)	-	25000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

266

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	9800	Complete Testing Charges
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	9800	Complete Testing Charges
6.1(Carbon %)	-	9800	Complete Testing Charges
6.1(Manganese %)	-	9800	Complete Testing Charges
6.1(Phosphorus %)	-	9800	Complete Testing Charges
6.1(Sulphur %)	-	9800	Complete Testing Charges
6.1(Silicon %)	-	9800	Complete Testing Charges
6.1( Copper %)	-	9800	Complete Testing Charges
6.1(V)	-	9800	Complete Testing Charges
6.1( Nb)	-	9800	Complete Testing Charges
6.1( Ti)	-	9800	Complete Testing Charges
6.1(Boron)	-	9800	Complete Testing Charges
6.1( Nitrogen%)	-	9800	Complete Testing Charges
6.1(Microalloying)	-	9800	Complete Testing Charges

Complete

25 Feb, 2027

-
-

267

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

10900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	10900	Complete Testing Charges
Cl 9(Press)	-	10900	Complete Testing Charges
Cl 11(Workmanship)	-	10900	Complete Testing Charges
Cl 12 & 13(Length, Width & Thickness)	-	10900	Complete Testing Charges
7.1(Carbon %)	-	10900	Complete Testing Charges
7.1(Manganese %)	-	10900	Complete Testing Charges
7.1(Phosphorus %)	-	10900	Complete Testing Charges
7.1(Sulphur %)	-	10900	Complete Testing Charges
7.1(Silicon %)	-	10900	Complete Testing Charges
7.1( Copper %)	-	10900	Complete Testing Charges
7.1( Aluminium %)	-	10900	Complete Testing Charges
7.1( Nb)	-	10900	Complete Testing Charges
7.1(V)	-	10900	Complete Testing Charges
7.1( Ti)	-	10900	Complete Testing Charges
7.1(Cr)	-	10900	Complete Testing Charges
7.1(Mo)	-	10900	Complete Testing Charges
7.1(Ni)	-	10900	Complete Testing Charges
7.1( Nitrogen%)	-	10900	Complete Testing Charges
7.1(CE)	-	10900	Complete Testing Charges

Complete

25 Feb, 2027

-
-

268

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

12000 View breakup
Rs.12000/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	12000	5% discount on complete testing charges is applicable for BIS.
Cl 9(Nominal Diameter & Out Of Shape)	-	12000	5% discount on complete testing charges is applicable for BIS.
6.1(Carbon %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6.1(Manganese %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6.1(Phosphorus %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6.1(Sulphur %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6.1(Silicon %)	-	12000	5% discount on complete testing charges is applicable for BIS.
6.1( Aluminium %)	-	12000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

269

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

10900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	10900	Complete Testing Charges
Cl 7(Diameter & Out Of Round)	-	10900	Complete Testing Charges
Cl 8(Decarburization)	-	10900	Complete Testing Charges
Cl 9(Inclusion)	-	10900	Complete Testing Charges
Cl 10(Hardenability)	-	10900	Complete Testing Charges
Cl 11(Size)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Carbon)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Sulphur)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Phosphorus)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Manganese)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Silicon)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Nickel)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Copper)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chromium)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Lead)	-	10900	Complete Testing Charges
5, 5.1, 5.2(Chemical Composition - Nitrogen)	-	10900	Complete Testing Charges

Complete

25 Feb, 2027

-
-

270

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	15000	5% discount on complete testing charges is applicable for BIS.
Cl 8(Press)	-	15000	5% discount on complete testing charges is applicable for BIS.
Cl 9(Strainage Embrittlement)	-	15000	5% discount on complete testing charges is applicable for BIS.
Cl 10(Erichsen Cupping)	-	15000	5% discount on complete testing charges is applicable for BIS.
Cl 13(Length, Width & Thickness)	-	15000	5% discount on complete testing charges is applicable for BIS.
6.1(Carbon %)	-	15000	5% discount on complete testing charges is applicable for BIS.
6.1(Manganese %)	-	15000	5% discount on complete testing charges is applicable for BIS.
6.1(Phosphorus %)	-	15000	5% discount on complete testing charges is applicable for BIS.
6.1(Sulphur %)	-	15000	5% discount on complete testing charges is applicable for BIS.
6.1(Silicon %)	-	15000	5% discount on complete testing charges is applicable for BIS.
6.1(Nitrogen%)	-	15000	5% discount on complete testing charges is applicable for BIS.
6.1( Aluminium %)	-	15000	5% discount on complete testing charges is applicable for BIS.

Complete

25 Feb, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List