BIS - LIMS (Laboratory Information Management System)

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List

Reset

298 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

211

IS 14708 (1999)

Ethyl acrylate - Specification

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Packing)	-	19800	Complete Testing Charges
4.2(Marking)	-	19800	Complete Testing Charges
3.0- Table -1, Sl no. 1(Assay, percent by mass, Annex A)	-	19800	Complete Testing Charges
3.0- Table -1, Sl no. 2(Acidity (as acrylic acid), percent by mass, Annex B)	-	19800	Complete Testing Charges
3.0- Table -1, Sl no. 3(Colour, Pt-Co scale, IS 8768)	-	19800	Complete Testing Charges
3.0- Table -1, Sl no. 4(Water, percent by mass, IS 2362)	-	19800	Complete Testing Charges
3.0- Table -1, Sl no. 5(Inhibitors (as methyl etherhydroquinone), ppm, Annex C)	-	19800	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

212

IS 14434 (1998)

Polycarbonate moulding and extrusion materials - Specification

30800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.2.2-Table-1,2(Determination of ash ,%, Annex-B)	-	30800	Complete Testing Charges
Clause 3.2.4,Table-4, Sl no.i(Melt Flow Index,g/10min,IS 13360 (Part 4lSec 1) /IS0 1133)	-	30800	Complete Testing Charges
Clause 3.2.4,Table-4, Sl no.ii(Specific Gravity,IS 13360 (Part 3/Sec 10) or IS 13360 (Part 3/Sec 11) or IS 13360 (Part 3/Sec 12)’ for ‘IS 13360 (Part 3/Sec 1)/ISO 1183’)	-	30800	Complete Testing Charges
Clause 3.2.4,Table-4, Sl no.iii(Flexural Modulus,Mpa,Annex F of IS 134 11)	-	30800	Complete Testing Charges
Clause 3.2.4,Table-4, Sl no.iv(Izod impact strength,J/m,Annex E of IS 13411)	-	30800	Complete Testing Charges
Clause 3.2.4,Table-4, Sl no.v(Deflection temperature under load,ᴼC,Annex H of IS 13411)	-	30800	Complete Testing Charges
Clause 3.2.5(Flammability, Annex C, UL 94)	-	30800	Complete Testing Charges
Clause 3.2.5(Haze and Luminous transmittance of transparent plastic,Annex D)	-	30800	Complete Testing Charges
Clause 3.2.5-Table-5(Volume resistivity,Ohm.cm, IS 3396)	-	30800	Complete Testing Charges
Clause 3.2.5-Table-5(Dielectric strength,kV/mm,IS 4486)	-	30800	Complete Testing Charges
Clause 3.2.5-Table-5(Dielectric constant at 1 MHz, IS 4486)	-	30800	Complete Testing Charges
Clause 3.2.5-Table-5(Dissipation factor at 1 MHz, IS 4486)	-	30800	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 22.09.2023

213

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

18900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 7(Workmanship)	-	18900	Complete Testing Charges
Cl 6(Workmanship)	-	18900	Complete Testing Charges
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	18900	Complete Testing Charges
Cl 10(UTM)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	18900	Complete Testing Charges
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	18900	Complete Testing Charges
10.2(Reverse bend test-IS 1716)	-	18900	Complete Testing Charges
10.3(Torsion test- IS 1717)	-	18900	Complete Testing Charges
10.4(Wrapping test-IS 1755)	-	18900	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

214

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

18900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	18900	Complete Testing Charges
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	18900	Complete Testing Charges
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	18900	Complete Testing Charges
6(Freedom from defects , IS 6911)	-	18900	Complete Testing Charges
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	18900	Complete Testing Charges
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	18900	Complete Testing Charges
10.3(Bend Test - IS 1599)	-	18900	Complete Testing Charges
11,Table 7(Erichsen cupping test-IS 10175)	-	18900	Complete Testing Charges
15(Surface Finish)	-	18900	Complete Testing Charges
17(Dimension and tolerance)	-	18900	Complete Testing Charges
10.1 Amd 2(Yeild Strength)	-	18900	Complete Testing Charges
10.1 Amd 2(0.2 Percent Proof Stress)	-	18900	Complete Testing Charges
10.1 Amd 2(Elongation)	-	18900	Complete Testing Charges
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	18900	Complete Testing Charges
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	18900	Complete Testing Charges
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	18900	Complete Testing Charges
Clause 17 , Table 9 to Table 19(Flatness)	-	18900	Complete Testing Charges
Clause 17 , Table 9 to Table 19(Camber)	-	18900	Complete Testing Charges
4(Supply of Material)	-	18900	Complete Testing Charges
8(Heat Treatment)	-	18900	Complete Testing Charges
19(Marking)	-	18900	Complete Testing Charges

25 Feb, 2027

-
-

215

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	9000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	9000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	9000	-
6(Freedom from defects:)	-	9000	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	9000	-
9.2, Table 3(Tensile Strength, MPa)	-	9000	-
9.3, Table 3(Elongation ,Percent)	-	9000	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	9000	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	9000	-
12(Dimensions & Tolerances, mm-IS 6603)	-	9000	-
12(Diameter, mm)	-	9000	-
12(Out of Round , mm)	-	9000	-
12(Length , mm)	-	9000	-
12(Variation in Straightness)	-	9000	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	9000	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	9000	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	9000	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	9000	-
Cl. 12 Table 9(Out of Square)	-	9000	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	9000	-
Cl. 9.3 Table 3(Bend Test)	-	9000	-
Cl 9.1/Table-3(Tensile strength)	-	9000	-
Cl 9.1/Table-3(Elongation)	-	9000	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

216

IS 9550 (2001)

Bright steel bars - Specification (First Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6(Parameter as per requiremnt of purchaser.)	-	9000	-
7(Mechancial Properties)	-	9000	-
8.1 and 8.2(Dimensions and Tolerances, mm)	-	9000	-
8.2.3(Straightness Tolerances)	-	9000	-
9.1(Decarburisation)	-	9000	-
13(Surface Protection)	-	9000	-
14.1(Marking)	-	9000	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

217

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Heat Treatment)	-	9000	-
Cl 9(Tensile & Hardness)	-	9000	-
Cl 10(Diameter & Out Of Round)	-	9000	-
10 & 10.1, Dia over 20 mm (Out of round)	-	9000	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	9000	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	9000	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	9000	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	9000	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	9000	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	9000	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(%Elongation)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(0.2% Proof Stress)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(%Elongation)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(0.2% Proof Stress)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(%Elongation)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(0.2% Proof Stress)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(%Elongation)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(0.2% Proof Stress)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(%Elongation)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(0.2% Proof Stress)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Hardness)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(%Elongation)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Ultimate Tensile Strength)	-	9000	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(0.2% Proof Stress)	-	9000	-
8(Steel Wire rod may be supplied in the annealed condition.)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Titanium)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Niobium)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Niobium)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Titanium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Titanium)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Niobium)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Titanium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Niobium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Titanium)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Niobium)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X30Cr13)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X20Cr13)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X12Cr13)(Carbon)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Molybdenum)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Copper)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Aluminium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Phosphorous)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Sulphur)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Chromium)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Nickel)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Manganese)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Silicon)	-	9000	-
7, Table 1of IS:6527 (Designation X04Cr13)(Carbon)	-	9000	-
Cl. 6(Freedom from defects)	-	9000	-
Cl. 10.1(Out of Round)	-	9000	-
Cl. 9.2 Table 4(Hardness)	-	9000	-
Cl. 9 .1 Table 3(Elongation)	-	9000	-
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	9000	-
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	9000	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

218

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1,7.2,7.3 Table 1(Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Nickel-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Chromium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Molybdenum-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Titanium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Niobium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Others(Nitrogen)-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.1,7.2,7.3 Table 1(Selenium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
7.3(Copper-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	9800	Complete Testing Charges
13(Corrosion Resistance- IS 10461(Part1))	-	9800	Complete Testing Charges
13(Corrosion Resistance- IS 10461(Part2))	-	9800	Complete Testing Charges
6(Freedom from defects)	-	9800	Complete Testing Charges
9(Hardness)	-	9800	Complete Testing Charges
10(Dimensional Tolerances)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Phosphorus)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Sulphur)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Niobium)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Titanium)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Molybdenum)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Chromium)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Nickel )	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Manganese)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Silicon)	-	9800	Complete Testing Charges
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Carbon)	-	9800	Complete Testing Charges
14(Marking)	-	9800	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

219

IS 4398 (1994)

Carbon - Chromium steel for the manufacture of balls, rollers and bearing races - Specification (Second Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
Cl. 5.1 & Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12400	Complete Testing Charges
7( Microstructure)	-	12400	Complete Testing Charges
8( Hardness-IS 1500: Pt 1)	-	12400	Complete Testing Charges
9(Inclusion content)	-	12400	Complete Testing Charges
10.1( Decarburization & surface)	-	12400	Complete Testing Charges
11( Fracture test)	-	12400	Complete Testing Charges
12( Macro etch test)	-	12400	Complete Testing Charges
14( Dimensional tolerances)	-	12400	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

220

IS 10151 (2019)

Polyvinyl chloride (Pvc) and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision)

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Marking)	-	10800	Complete Testing Charges
4.1("The material shall comply with the threshold limits of the catalysts, polymerization inhibitors, emulsifying agents, suspension agents, chain-transfer agents and miscellaneous additives as prescribed in IS 10148")	-	10800	Complete Testing Charges
5.1(Packing)	-	10800	Complete Testing Charges
4.3(Pigments and Colourants, IS 9833)	-	10800	Complete Testing Charges
4.5(Overall Migration, IS 9845)	-	10800	Complete Testing Charges
4.2("In case auxiliary items, that is, plasticizers, stabilizers, lubricants and other additives are used in PVC compounds for food-packaging applications it shall comply with the threshold limits as prescribed in IS 10148")	-	10800	Complete Testing Charges
4.4(Monomer content)	-	10800	Complete Testing Charges

25 Feb, 2027

-
-

221

IS 14707 (1999)

Methyl acrylate - Specification

26800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Packing)	-	26800	-
4.2(Marking)	-	26800	-
3 - Table -1, Sl no. 1(Assay, percent by mass, Min, Annex A)	-	26800	-
3 - Table -1, Sl no. 2(Acidity (as acrylic acid),percent by mass, Max, Annex B)	-	26800	-
3 - Table -1, Sl no. 3(Colour, Pt-Co scale, Max, IS 8768)	-	26800	-
3 - Table -1, Sl no. 4(Water, percent by mass,Max, 2362)	-	26800	-
3 - Table -1, Sl no. 5(" Inhibitors (as methyl etherhydroquinone), ppm Max , Annex C ")	-	26800	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

222

IS 16112 (2013)

Beta picoline - Specification

16800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	16800	-
3.2(Solubility)	-	16800	-
4.1(Packing)	-	16800	-
4.2(Marking)	-	16800	-
3.3 - Table -1, Sl no. 1(Beta picoline content,percent by mass, Min, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 2(2-Ethyl pyridine content,percent by mass, Max, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 3(Alpha picoline content,percent by mass, Max,Annex A)	-	16800	-
3.3 - Table -1, Sl no. 4(Gamma picoline content,percent by mass, Max, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 5(Other unknown impurities,percent by mass, Max, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 6(Moisture content,percent by mass, Max, Annex B)	-	16800	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

223

IS 16113 (2013)

Gamma picoline - Specification

16800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	16800	-
3.2(Solubility)	-	16800	-
4.1(Packing)	-	16800	-
4.2(Marking)	-	16800	-
3.3 - Table -1, Sl no. 1(Gamma picoline content,percent by mass, Min, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 2(2-Ethyl pyridine content,percent by mass, Max, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 3(Alpha picoline content,percent by mass, Max,Annex A)	-	16800	-
3.3 - Table -1, Sl no. 4(Beta picoline content,percent by mass, Max, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 5(2,6-Lutidine content,percent by mass, Max,Annex A)	-	16800	-
3.3 - Table -1, Sl no. 6(Other unknown impurities,percent by mass, Max, Annex A)	-	16800	-
3.3 - Table -1, Sl no. 7(Moisture content,percent by mass, Max, Annex B)	-	16800	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

224

IS 12540 (1988)

Specification for acrylonitrile

28800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Packing)	-	28800	-
4.2(Marking)	-	28800	-
2.2- Table -1, Sl no. 2(Assay, percent by mass, Annex A3)	-	28800	-
2.2- Table -1, Sl no. 1(Distiilation range at 760 mm Hg, Annex A2)	-	28800	-
2.2- Table -1, Sl no. 3(Water content, percent by mass, Annex A4)	-	28800	-
2.2- Table -1, Sl no. 4(Specific gravity, at 27/27 °C, Annex A5)	-	28800	-
2.2- Table -1, Sl no. 5(Refractive index at 27 °C, Annex A6)	-	28800	-
2.2- Table -1, Sl no. 6(Hydrocyanic acid content, percent by mass, Annex A7)	-	28800	-
2.2- Table -1, Sl no. 7(Soluble iron content, percent by mass, Annex A8)	-	28800	-
2.2- Table -1, Sl no. 8(Methyl vinyl ketone, percent by mass, Annex A9)	-	28800	-
2.2- Table -1, Sl no. 9(Acetonitrile, percent by mass, Annex A10)	-	28800	-
2.2- Table -1, Sl no. 10(Acetaldehyde content, percent by mass, Annex A11)	-	28800	-
2.2- Table -1, Sl no. 11(Ammonia content, percent by mass, Annex A12)	-	28800	-
2.2- Table -1, Sl no. 12("Monoethyl ether of hydroqninone (MEHQ), ppm, Annex A13")	-	28800	-
2.2- Table -1, Sl no. 13(pH (5 percent aqueous sol), Annex A14)	-	28800	-
2.2- Table -1, Sl no. 14(Colour, APHA, Annex A15)	-	28800	-
2.2- Table -1, Sl no. 15(Non-volatile matter, percent by mass, Annex A16)	-	28800	-
2.2- Table -1, Sl no. 16(Peroxide content, percent by mass, Annex A17)	-	28800	-
2.2- Table -1, Sl no. 17(Heavy metals (as Cu), percent by mass, Annex A18)	-	28800	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

225

IS 12345 (1988)

Specification for vinyl acetate monomer

26100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Packing)	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 1("Acidity ( as acetic acid ), percent by mass, Annex A2")	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 3("Aldehyde ( as acetaldehyde), percent by mass,, Annex A3")	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 4(Moisture, percent by mass, IS : 2362)	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 5("Distillation range at 760 mm of Hg, Method A of P : 18 of IS: 1448")	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 6("Colour, APHA, Appendix A of IS: 170")	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 7(Specific gravity 20/20 °C, 6 of IS : 82)	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 8(Inhibitor content-Hydroquinone, ppm, Annex A4)	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 8(Inhibitor content-Diphenylamine, ppm, Annex A5)	-	26100	-
2.2 & 5.1 - Table -1, Sl no. 9(Polymer content, ppm, Annex A6)	-	26100	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

226

IS 12084 (2018)

Morpholine - Specification (First Revision)

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 - Table 1 - Sl No - vi(Chloride ( as Cl ) I IS 3025 (Part 32)	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - x(Silica ( as SiO2 ) - IS 3025 (Part 35))	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - ix(Nickel ( as Ni ) - IS 3025 (Part 54))	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - viii(Copper ( as Cu ) - IS 3025 (Part 42))	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - vii(Iron ( as Fe ) - IS 3025 (Part 53))	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - vi(Ash content - Annex E)	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - v(Residue, on evaporation - Annex D)	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - iv(Boiling range for for 90 percent recovery - IS 5298)	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - iii(Colour (Pt-Co-Scale ) - IS 3025(Part 4))	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - ii(Relative density, 20/20 oC - Annex C)	-	10800	Complete Testing Charges
4.3 - Table 1 - Sl No - i(Purity (as Morpholine) - Annex B)	-	10800	Complete Testing Charges
4.2(The material shall not contain any free ammonia, IS 11255 part-6)	-	10800	Complete Testing Charges
4.1(Description)	-	10800	Complete Testing Charges
4.1(Requirement)	-	10800	Complete Testing Charges
5.1(Packing)	-	10800	Complete Testing Charges
5.2(Marking)	-	10800	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

227

IS 869 (2020)

Specification for Ethylene Dichloride ( Third Revision )

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	24900	Complete Testing Charges
3.1.1(Solubility)	-	24900	Complete Testing Charges
4.2(Marking)	-	24900	Complete Testing Charges
3.2 Table -1, Sl no. 1(Relative density at 15°C/15°C, Annex A2)	-	24900	Complete Testing Charges
3.2 Table -1, Sl no. 2(1,2 Dichloroethane (EDC), weight percent, ASTM D 6806)	-	24900	Complete Testing Charges
3.2 Table -1, Sl no. 3(Residue on evaporation, percent by mass, Annex A3)	-	24900	Complete Testing Charges
3.2 Table -1, Sl no. 4(Acidity (as HCl), percent by mass, Annex A4)	-	24900	Complete Testing Charges
3.2 Table -1, Sl no. 5(Colour, Annex A6)	-	24900	Complete Testing Charges
3.2 Table -1, Sl no. 6(Moisture content, percent by mass, Annex A5)	-	24900	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

228

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 8.3.1(Adhesion )	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 8.3.2(Impact Resistance)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 8.4(Load Resistance)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 8.5(Scratch Resistance)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 8.7(Dry Film Thickness)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 9.1(Workmanship)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 10.1(Corrosion Test)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 10.2(Humidity Test)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 11(Length, Width & Thickness)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
Cl 12(Weight)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
8.6(Solvent Resistance test)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
9.2(colour)	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)
9.3(Gloss (60 Deg))	-	11900	Rs 25000(class-I), Rs 52900(class-III), Rs 57900(class-IV)

25 Feb, 2027

-
Included w.e.f. 07.10.2022

229

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	12000	Complete testing charges
Cl 9(Tensile Test On UTM)	-	12000	Complete testing charges
6 AND AS PER IS 7887(MICRO ALLOY)	-	12000	Complete testing charges
6 AND AS PER IS 7887(ALUMINIUM)	-	12000	Complete testing charges
6 AND AS PER IS 7887(PHOSPHORUS)	-	12000	Complete testing charges
6 AND AS PER IS 7887(SULPHUR)	-	12000	Complete testing charges
6 AND AS PER IS 7887(MANGANESE)	-	12000	Complete testing charges
6 AND AS PER IS 7887(SILICON)	-	12000	Complete testing charges
6 AND AS PER IS 7887(CARBON)	-	12000	Complete testing charges
7 & 8(Ovality)	-	12000	Complete testing charges
7 & 8(Diameter)	-	12000	Complete testing charges
9.2(Wrapping Test)	-	12000	Complete testing charges
9.3(Bend test)	-	12000	Complete testing charges
10(Finish)	-	12000	Complete testing charges
11(Coating test)	-	12000	Complete testing charges
13(Freedom from defects)	-	12000	Complete testing charges
14(Packing)	-	12000	Complete testing charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

230

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Diameter)	-	34000	Complete Testing Charges
Cl 5.1.2(Weight)	-	34000	Complete Testing Charges
Cl 6.1(Tensile Test On UTM)	-	34000	Complete Testing Charges
Cl 6.2(Tensile Test On UTM)	-	34000	Complete Testing Charges
Cl 6.3(Tensile Test On UTM)	-	34000	Complete Testing Charges
3.1.1(PHOSPHORUS)	-	34000	Complete Testing Charges
3.1.1(SULPHUR)	-	34000	Complete Testing Charges
Cl. 7.5(Ductility/ Reverse Bend Test)	-	34000	Complete Testing Charges
Cl. 7.4(0.2 % Proof Stress )	-	34000	Complete Testing Charges
Clause 6.4(Uncoiling Of Wire)	-	34000	Complete Testing Charges
Clause 3.5(Weld joints)	-	34000	Complete Testing Charges
Clause 3.4(Surface Finish)	-	34000	Complete Testing Charges
Clause 3.3(Workmanship )	-	34000	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

231

IS 1785 : Part 1 (1983)

Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Diameter)	-	32000	-
Cl 6.1(Tensile Test On UTM)	-	32000	-
Cl 6.2(Tensile Test On UTM)	-	32000	-
Cl 6.3(Reverse Bend Test)	-	32000	-
Cl 6.4(Tensile Test On UTM)	-	32000	-
Cl 6.5(Load )	-	32000	-
Clause 3.1.1(Phosphorus)	-	32000	-
Clause 3.1.1(Sulphur)	-	32000	-
Clause 6.5.1(Relaxation stress(100 h))	-	32000	-
Clause 6.5(Relaxation stress(1000 h))	-	32000	-
Clause 3.5(Weld joints)	-	32000	-
Clause 3.4(Surface Finish)	-	32000	-
Clause 3.3(Workmanship )	-	32000	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

232

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	25000	With pullout test
Cl 9.3(Load In One Direction)	-	25000	With pullout test
Cl 8.1(UTM)	-	25000	With pullout test
Cl 7.2(Weight)	-	25000	With pullout test
Cl 6.1(Length, Width & Thickness)	-	25000	With pullout test
Cl 5(Deformations and Surface Characteristics)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	25000	With pullout test
4.1(Sulphur and phosphorous)	-	25000	With pullout test
4.1(CE)	-	25000	With pullout test
4.1( Nitrogen%)	-	25000	With pullout test
4.1(Silicon %)	-	25000	With pullout test
4.1(Ni)	-	25000	With pullout test
4.1(Mo)	-	25000	With pullout test
4.1(Cr)	-	25000	With pullout test
4.1( Ti)	-	25000	With pullout test
4.1(V)	-	25000	With pullout test
4.1( Nb)	-	25000	With pullout test
4.1( Aluminium %)	-	25000	With pullout test
4.1( Copper %)	-	25000	With pullout test
4.1(Sulphur %)	-	25000	With pullout test
4.1(Phosphorus %)	-	25000	With pullout test
4.1(Manganese %)	-	25000	With pullout test
4.1(Carbon %)	-	25000	With pullout test
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	25000	With pullout test
Cl. 9.3, Table 4(Bend Test )	-	25000	With pullout test
Cl. 8.1 Table 3(Elongation, percentage)	-	25000	With pullout test
Cl. 8.1 Table 3(Tensile Strength (TS))	-	25000	With pullout test
Cl. 8.1 Table 3(Yield Stress (YS))	-	25000	With pullout test
Cl. 7.2 Table -2 (Nominal Mass)	-	25000	With pullout test
Cl. 6.1(Nominal Size)	-	25000	With pullout test
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	25000	With pullout test
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	25000	With pullout test
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	25000	With pullout test
8.18.1 Table 3(Total elongation at maximum force)	-	25000	With pullout test
5.7(PullOut (Bond Test))	-	25000	With pullout test
4.2(Niobium (Nb))	-	25000	With pullout test
4.2(Boron (B))	-	25000	With pullout test
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	25000	With pullout test
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	25000	With pullout test
Cl. 8.1 Table 3(TS/YS Ratio)	-	25000	With pullout test
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	25000	With pullout test
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	25000	With pullout test
Cl. 4.3(Visual Inspection.)	-	25000	With pullout test
Cl. 5.2(Surface Characteristics)	-	25000	With pullout test
13(Identification and marking)	-	25000	With pullout test

25 Feb, 2027

-
Included w.e.f. 07.10.2022 Inclusive of Pull-out test

233

IS 15392 (2003)

Aluminium and aluminium alloy bare foil for food packaging - Specification

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(PINHOLE COUNT)	-	1500	Complete Testing Charges
Clause 6(FREEDOM FROM DEFECTS)	-	1500	Complete Testing Charges
Clause 7 Sub-Clause 7.1(Material)	-	4500	Complete Testing Charges
Clause 7 Sub-Clause 7.2(Material)	-	1000	Complete Testing Charges
Clause 10 Table 2(Preferred Thickness)	-	1500	Complete Testing Charges
Clause 14(Surface condition)	-	2500	Complete Testing Charges
Clause 12(Dimension and Tolerances: I) Width)	-	2500	For entire Cl. 12
Clause 12(Dimension and Tolerances: 2) Length)	-	2500	For entire Cl. 12
9(Lubricants)	-	0	Complete Testing Charges
13-(Table-5)(Tensile properties-IS 13237)	-	3500	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

234

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9800	Complete Testing Charges
Cl. 5.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9800	Complete Testing Charges
Cl. 5.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9800	Complete Testing Charges
Cl. 5.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9800	Complete Testing Charges
Cl. 5.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9800	Complete Testing Charges
7(Workmanship & Finish)	-	9800	Complete Testing Charges
8(Freedom from defects)	-	9800	Complete Testing Charges
6.1, Table 3 (Tensile Test-1608:Part 1)	-	9800	Complete Testing Charges
6.1, Table 3 (Yield Strength, Mpa)	-	9800	Complete Testing Charges
6.1, Table 3 (Elongation, %)	-	9800	Complete Testing Charges
6.1, Table 3 (Reduction in area, Percent)	-	9800	Complete Testing Charges
6.1, Table 3 (Impact Test)	-	9800	Complete Testing Charges
11(Ultrasonic Testing)	-	9800	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

235

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	12500	-
7.1 (As per IS 5986)(CE- IS 228)	-	12500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	12500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	12500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	12500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	12500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	12500	-
10.1(Coil Internal Diameter-IS17404)	-	12500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	12500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	12500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	12500	-
13.1(Marking)	-	12500	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

236

IS 5518 (1996)

Steels for die blocks for drop forging - Specification (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Molybdenum)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Nickel )	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Chromium)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Phosphorus)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Sulphur)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Silicon)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Manganese)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Carbon)	-	12500	-
6(Freedom from defects)	-	12500	-
9(Hardness)	-	12500	-
12(Dimensional Tolerances)	-	12500	-
14(Ultasonic Test)	-	12500	-
16(Marking)	-	12500	-
15(a) Macro etch test in accordance with IS 11371 : 1985; b) Cleanliness test as per IS 10138 (Part 1) : 1992, IS 10138 (Part 2) : 1983 and IS 10138 (Part 3) : 1983; and c) Distribution of carbides as per IS 12211 : 1987.)	-	12500	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

237

IS 15769 (2008)

Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel

29850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Radiographic Soundness Test)	-	29850	Complete Testing Charges
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	29850	Complete Testing Charges
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	29850	Complete Testing Charges
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	29850	Complete Testing Charges
5.6(Longitudinal Bend Test)	-	29850	Complete Testing Charges
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	29850	Complete Testing Charges
5.8 (Table No.- 15)(Chemical Composition,%)	-	29850	Complete Testing Charges

25 Feb, 2027

-
Included w.e.f. 07.10.2022

238

IS 7291 (1981)

Specification for high speed tool steels (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1, 5.2 & 14.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Cobalt- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Selenium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Lead- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
7(Hardness)	-	12500	-
8(Macrostructure)	-	12500	-
9(Surface Decarburisation)	-	12500	-
10(Carbide and distribution)	-	12500	-
11(Grain Size)	-	12500	-
12(Dimensional Tolerance)	-	12500	-
15.1(Fracture in Heat treated condition)	-	12500	-
18(Marking)	-	12500	-
16(Finish)	-	12500	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

239

IS 7226 (1974)

Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 Table 1(Carbon- IS 228)	-	12500	-
4.1 Table 1(Manganese- IS 228)	-	12500	-
4.1 Table 1(Silicon- IS 228)	-	12500	-
4.1 Table 1(Sulphur- IS 228)	-	12500	-
4.1 Table 1(Phosphorous- IS 228)	-	12500	-
4.1 Table 1(Chromium- IS 228)	-	12500	-
4.1 Table 1(Tungsten- IS 228)	-	12500	-
5(HARDNESS TEST)	-	12500	-
6( FREEDOM FROM DEFECTS)	-	12500	-
9.1, Table 3(i)TOLERANCE ON WIDTH)	-	12500	-
9.1, Table 4(ii)TOLERANCE ON THICKNESS)	-	12500	-
9.2( Camber)	-	12500	-
10(SURFACE FINISH)	-	12500	-
12.1(Marking)	-	12500	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

240

IS 11169 : Part 2 (1989)

Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.2 Table 2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Other(Titanium)- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
7(FREEDOM FROM DEFECTS)	-	12500	-
8.2, table 5(i) Yield stess/.2% Proof stress, Mpa)	-	12500	-
8.2, table 5(ii)Ultimate Tensile Strength, Mpa)	-	12500	-
8.2, table 5(iii)Elongation, %)	-	12500	-
8.1, Table 4(iv) Reduction in area)	-	12500	-
8.2, table 5(v)Impact strength, J)	-	12500	-
9(CORROSION RESISTANCE)	-	12500	-

25 Feb, 2027

-
Included w.e.f. 07.10.2022

Bureau of Indian Standards

The National Standards Body of India

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List