BIS - LIMS (Laboratory Information Management System)

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List

Reset

257 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

181

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	12500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	12500	-
7.1 (As per IS 5986)(CE- IS 228)	-	12500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	12500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	12500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	12500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	12500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	12500	-
10.1(Coil Internal Diameter-IS17404)	-	12500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	12500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	12500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	12500	-
13.1(Marking)	-	12500	-

Complete

Included w.e.f. 07.10.2022

182

IS 5518 (1996)

Steels for die blocks for drop forging - Specification (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Molybdenum)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Nickel )	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Chromium)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Phosphorus)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Sulphur)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Silicon)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Manganese)	-	12500	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2(Carbon)	-	12500	-
6(Freedom from defects)	-	12500	-
9(Hardness)	-	12500	-
12(Dimensional Tolerances)	-	12500	-
14(Ultasonic Test)	-	12500	-
16(Marking)	-	12500	-
15(a) Macro etch test in accordance with IS 11371 : 1985; b) Cleanliness test as per IS 10138 (Part 1) : 1992, IS 10138 (Part 2) : 1983 and IS 10138 (Part 3) : 1983; and c) Distribution of carbides as per IS 12211 : 1987.)	-	12500	-

Complete

Included w.e.f. 07.10.2022

183

IS 15769 (2008)

Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel

29850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Radiographic Soundness Test)	-	29850	Complete Testing Charges
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	29850	Complete Testing Charges
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	29850	Complete Testing Charges
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	29850	Complete Testing Charges
5.6(Longitudinal Bend Test)	-	29850	Complete Testing Charges
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	29850	Complete Testing Charges
5.8 (Table No.- 15)(Chemical Composition,%)	-	29850	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

184

IS 7291 (1981)

Specification for high speed tool steels (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1, 5.2 & 14.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Cobalt- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Selenium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl. 5.1, 5.2 & 14.1(Lead- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
7(Hardness)	-	12500	-
8(Macrostructure)	-	12500	-
9(Surface Decarburisation)	-	12500	-
10(Carbide and distribution)	-	12500	-
11(Grain Size)	-	12500	-
12(Dimensional Tolerance)	-	12500	-
15.1(Fracture in Heat treated condition)	-	12500	-
18(Marking)	-	12500	-
16(Finish)	-	12500	-

Complete

Included w.e.f. 07.10.2022

185

IS 7226 (1974)

Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 Table 1(Carbon- IS 228)	-	12500	-
4.1 Table 1(Manganese- IS 228)	-	12500	-
4.1 Table 1(Silicon- IS 228)	-	12500	-
4.1 Table 1(Sulphur- IS 228)	-	12500	-
4.1 Table 1(Phosphorous- IS 228)	-	12500	-
4.1 Table 1(Chromium- IS 228)	-	12500	-
4.1 Table 1(Tungsten- IS 228)	-	12500	-
5(HARDNESS TEST)	-	12500	-
6( FREEDOM FROM DEFECTS)	-	12500	-
9.1, Table 3(i)TOLERANCE ON WIDTH)	-	12500	-
9.1, Table 4(ii)TOLERANCE ON THICKNESS)	-	12500	-
9.2( Camber)	-	12500	-
10(SURFACE FINISH)	-	12500	-
12.1(Marking)	-	12500	-

Complete

Included w.e.f. 07.10.2022

186

IS 3748 (1990)

Tool and die steels - Specification (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, 7.2, 12.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Cobalt- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
Cl 7.1, 7.2, 12.1 & Table 1(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12500	-
6(Freedom from defects)	-	12500	-
9.1(Hardness , max-IS 1500 )	-	12500	-
10(Dimensions and Tolerances, mm)	-	12500	-
13(Ultra sound testing)	-	12500	-
14.1(i) Shephard's P.F.Test)	-	12500	-
14.2(ii)Fracture disc test)	-	12500	-
14.3(iii)Macro etch test)	-	12500	-
14.4(iv)Crop test upto 45mm dia)	-	12500	-
14.5(v) Magnaflux test)	-	12500	-
14.6(vi) Metallographic test)	-	12500	-
14.7(vii) Diistribution of carbides)	-	12500	-

Complete

Included w.e.f. 07.10.2022

187

IS 11169 : Part 2 (1989)

Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.2 Table 2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
6.1,6.2 Table 2(Other(Titanium)- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	12500	-
7(FREEDOM FROM DEFECTS)	-	12500	-
8.2, table 5(i) Yield stess/.2% Proof stress, Mpa)	-	12500	-
8.2, table 5(ii)Ultimate Tensile Strength, Mpa)	-	12500	-
8.2, table 5(iii)Elongation, %)	-	12500	-
8.1, Table 4(iv) Reduction in area)	-	12500	-
8.2, table 5(v)Impact strength, J)	-	12500	-
9(CORROSION RESISTANCE)	-	12500	-

Complete

Included w.e.f. 07.10.2022

188

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Diameter & Out Of Roundness)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TIN)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TITANIUM)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(VANADIUM)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NIOBIUM)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Molybdenum)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Chromium)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Nickel)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( ALUMINIUM)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SILICON)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NITROGEN)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(MANGANESE)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(PHOSPHURS)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SULPHUR)	-	12500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( CARBON)	-	12500	-
"Clause 4.1,4.2,4,3 Table 2 Steel Designation 21C10BT Steel Designation 26C10BT Steel Designation 34C14BT Steel Designation B8Cr4Mn2BT"(Boron)	-	12500	-
"Clause 8 "(" Brinell Hardness")	-	12500	-
"Clause 9 "("Ultimate Tensile Strength 0.2 Percent proof Stress Elongation Izod Impact Strength")	-	12500	-
"Clause 10 "(Metalurgical Properties)	-	12500	-
"Clause 11 "(Hardenability)	-	12500	-
7(Freedom from defects-IS 7739)	-	12500	-

Complete

Included w.e.f. 07.10.2022

189

IS 4454 : Part 4 (2001)

Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1. Cl.1.1,1.2,7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
Table 1. Cl.1.1,1.2,7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
Table 1. Cl.1.1,1.2,7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
Table 1. Cl.1.1,1.2,7.1 & 7.2(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
Table 1. Cl.1.1,1.2,7.1 & 7.2(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
Table 1. Cl.1.1,1.2,7.1 & 7.2(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
Table 1. Cl.1.1,1.2,7.1 & 7.2(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
Table 1. Cl.1.1,1.2,7.1 & 7.2(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	14900	Complete Testing Charges
8(Freedom from defects)	-	14900	Complete Testing Charges
9(Dimensions & Tolerances)	-	14900	Complete Testing Charges
10(Mechanical properties)	-	14900	Complete Testing Charges
10.1.1, Table 4(Tensile strength)	-	14900	Complete Testing Charges
10.1.1, Table 4(Reduction in area)	-	14900	Complete Testing Charges
10.2(Wrapping test)	-	14900	Complete Testing Charges
10.3(Reverse torsion test)	-	14900	Complete Testing Charges
10.4(Cast of the wire)	-	14900	Complete Testing Charges
10.5(Bend test)	-	14900	Complete Testing Charges
10.6(Coiling test)	-	14900	Complete Testing Charges
11(Surface finish)	-	14900	Complete Testing Charges
15.1(Marking)	-	14900	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

190

IS 4454 : Part 2 (2001)

Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	14900	Complete Testing Charges
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	14900	Complete Testing Charges
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-	14900	Complete Testing Charges
7.1, 7.2(Vanadium)	-	14900	Complete Testing Charges
7.1, 7.2(Chromium)	-	14900	Complete Testing Charges
7.1, 7.2(copper)	-	14900	Complete Testing Charges
7.1, 7.2(phosphorus)	-	14900	Complete Testing Charges
7.1, 7.2(sulphur)	-	14900	Complete Testing Charges
7.1, 7.2(manganese)	-	14900	Complete Testing Charges
7.1, 7.2(silicon )	-	14900	Complete Testing Charges
7.1, 7.2(carbon)	-	14900	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

191

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	10800	Complete Testing Charges
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	10800	Complete Testing Charges
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	10800	Complete Testing Charges
7.1, 7.2(copper)	-	10800	Complete Testing Charges
7.1, 7.2(Vanadium)	-	10800	Complete Testing Charges
7.1, 7.2(phosphorus)	-	10800	Complete Testing Charges
7.1, 7.2(sulphur)	-	10800	Complete Testing Charges
7.1, 7.2(manganese)	-	10800	Complete Testing Charges
7.1, 7.2(silicon )	-	10800	Complete Testing Charges
7.1, 7.2(carbon)	-	10800	Complete Testing Charges
7.1, 7.2(copper)	-	10800	Complete Testing Charges
7.1, 7.2(Chromium)	-	10800	Complete Testing Charges
7.1, 7.2(nitrogen)	-	10800	Complete Testing Charges
7.1, 7.2(micro alloy)	-	10800	Complete Testing Charges
7.1, 7.2(cu + cr+ni)	-	10800	Complete Testing Charges
7.1, 7.2(sulphur + phosphorus)	-	10800	Complete Testing Charges
11(Coating and surface finish)	-	10800	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

192

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	0	Complete Testing Charges
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	4000	Rs. 4000 for entire Table -4
11(Transverse Tension Test,%)	-	0	Complete Testing Charges
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	0	Complete Testing Charges
13 (Table No.- 7)(Flange Test-IS 2330)	-	0	Complete Testing Charges
14(Reverse Flattaning Test)	-	0	Complete Testing Charges
15(Flattaning Test-IS 2328)	-	0	Complete Testing Charges
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	0	Complete Testing Charges
18(Leak Tighteness Test)	-	0	Complete Testing Charges
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	0	Complete Testing Charges
20(Eddy current test, Air under water test ,Radiographic tests)	-	0	Complete Testing Charges
22(Workmanship, Finish and Appearance)	-	0	Complete Testing Charges
23(Repair by Welding or Grinding)	-	0	Complete Testing Charges
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	2000	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	7000	Rs. 7000 for entire Table 1
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	4000	Complete Testing Charges
Clause 10.1 - Table 4(Tensile Strength)	-	0	Complete Testing Charges
Clause 10.1 - Table 4(Yield Strength)	-	0	Complete Testing Charges
Clause 10.1 - Table 4(Percent Elongation)	-	0	Complete Testing Charges
Clause 11(Transverse Tension Test)	-	3500	Complete Testing Charges
Clause 12(Hardness Test)	-	3000	Complete Testing Charges
Clause 13(Flange Test)	-	3000	Complete Testing Charges
Clause 14(Reverse Flattening Test)	-	2500	Complete Testing Charges
Clause 15(Flattening Test)	-	2500	Complete Testing Charges
Clause 16(Grain Size)	-	3500	Complete Testing Charges
Clause 18()	-	2500	Complete Testing Charges
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	4000	Complete Testing Charges
Clause 22(Workmanship, Finish & Appearance)	-	1500	Complete Testing Charges
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	Complete Testing Charges
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	0	Complete Testing Charges
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	0	Complete Testing Charges
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	0	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

193

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	24900	Complete Testing Charges
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	24900	Complete Testing Charges
11(Transverse Tension Test,%)	-	24900	Complete Testing Charges
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	24900	Complete Testing Charges
13 (Table No.- 7)(Flaring Test)	-	24900	Complete Testing Charges
14(Flattaning Test-IS 2328)	-	24900	Complete Testing Charges
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	24900	Complete Testing Charges
17(Leak Tighteness Test)	-	24900	Complete Testing Charges
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	24900	Complete Testing Charges
19(Eddy current test & Air under water)	-	24900	Complete Testing Charges
21(Workmanship, Finish and Appearance)	-	24900	Complete Testing Charges
22(Repair by Welding or Grinding)	-	1500	Complete Testing Charges
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	24900	Complete Testing Charges
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	24900	Complete Testing Charges
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	24900	Complete Testing Charges
Clause 10.1 - Table 4(Tensile Strength)	-	4000	For Entire Table- 4
Clause 10.1 - Table 4(Percent Elongation)	-	4000	Complete Testing Charges
Clause 11(Transverse Tension Test)	-	24900	Complete Testing Charges
Clause 12(Hardness Test)	-	24900	Complete Testing Charges
Clause 13(Flaring Test)	-	24900	Complete Testing Charges
Clause 14(Flattening Test)	-	24900	Complete Testing Charges
Clause 15(Grain Size)	-	24900	Complete Testing Charges
Clause 17(Leak Tightness Test)	-	24900	Complete Testing Charges
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	24900	Complete Testing Charges
Clause 21(Workmanship, Finish & Appearance)	-	24900	Complete Testing Charges
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	2000	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

194

IS 13449 (1992)

Positive list of constituents of ethylene vinyl acetate (Eva) copolymers in contact with foodstuffs, pharmaceuticals and drinking water

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Basic Resin,m/m)	-	20000	Complete Testing Charges
3.2(Manufacturing Residues,%)	-	20000	Complete Testing Charges
3.2.1(Emulsifyirlg and Suspension Agents,%)	-	20000	Complete Testing Charges
3.2.2(Catalyst,%)	-	20000	Complete Testing Charges
3.3(Polymerization Ingredients)	-	20000	Complete Testing Charges
3.4(Auxiliary Items,%)	-	20000	Complete Testing Charges
3.4.6(Pigments, Fillers and Dyes of IS 9833)	-	20000	Complete Testing Charges
3.4.1(Lubricants)	-	20000	Complete Testing Charges
3.4.2(Antioxidants)	-	20000	Complete Testing Charges
3.4.3(Antistatic and /or antifogging agent)	-	20000	Complete Testing Charges
3.4.4(Ultra-violet absorbers)	-	20000	Complete Testing Charges
3.4.5(Blowing Agents)	-	20000	Complete Testing Charges
3.4.6(Antifungal Agents)	-	20000	Complete Testing Charges
3.4.8(Other additives including anti blocking agent for EVA copolymer)	-	20000	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

195

IS 13601 (1993)

Ethylene vinyl acetate (Eva) copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Vinyl Acetate (VA) Content,% of Annex B)	-	24900	Complete Testing Charges
4.1.2(Additive Concentrate,%)	-	24900	Complete Testing Charges
4.2(Material,% of IS 13349)	-	24900	Complete Testing Charges
4.3(Pigments and Colourants of IS 9833)	-	24900	Complete Testing Charges
4.4(Overall Migration of IS 9845)	-	24900	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

196

IS 17264 (2022)

Textiles - Polyester industrial yarn - Specification (first revision)

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation of Yarn (IS 17264))	-	46500	-
5.2.1 a(melting point)	-	46500	-
5.2.1 b(Staining Test (IS 667))	-	46500	-
5.2.2 & Table-1(Classification (IS 17264))	-	46500	-
5.2.2 & Table-1(Identification)	-	46500	-
6.3(Freedom from defects (IS 17264))	-	46500	-
6.1 & Table-3(Linear Density (IS 7703 Part-1))	-	46500	-
6.1 & Table-3(Tenacity (IS 7703 Part-2))	-	46500	-
6.1 & Table-3(Elongation (IS 7703 Part-2))	-	46500	-
6.1 & Table-3(Hot Air Shrinkage (IS 17264))	-	46500	-
6.2 & Table-4(Moisture regain (IS 17264))	-	46500	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	46500	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	46500	-
6.2 & Table-4(Finish oil pick-up (IS 17264))	-	46500	-
6.2 & Table-4(Phosphorus content (IS 17264))	-	46500	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 Part-2))	-	46500	-
6.2 & Table-4(Colour strength with reference to standard yarn (IS 17264))	-	46500	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE (IS 17264))	-	46500	-
6.4 & Table-5(Colour Fastness Rating to light (IS/ISO 105-B01))	-	46500	-
6.4 & Table-5(Colour Fastness Rating to Rubbing (IS/ISO 105-X12))	-	46500	-
8(Marking (IS 17264))	-	46500	-
6.6 & Table-6(Free and releasable formaldehyde (IS 14563 Part-1 & 2))	-	46500	-
6.6 & Table-6(Mercury (IS 15651))	-	46500	-
6.6 & Table-6(Chromium III (IS 15651))	-	46500	-
6.6 & Table-6(Chromium VI (IS 15651))	-	46500	-
6.6 & Table-6(Lead (IS 15651))	-	46500	-
6.6 & Table-6(Cadmium (IS 15651))	-	46500	-
6.6 & Table-6(Copper (IS 15651))	-	46500	-
6.6 & Table-6(Antimony (IS 15651))	-	46500	-
6.6 & Table-6(Pentachlorophenol (IS 15651))	-	46500	-
6.6 & Table-6(Pesticides (sum parameter) (IS 15651))	-	46500	-
6.6 & Table-6(Banned pesticides (IS 15651))	-	46500	-
6.6 & Table-6(Banned azo colourants (arylamines) (IS 15570))	-	46500	-

Complete

Included w.e.f. 07.10.2022

197

IS 17263 (2022)

Textiles - Polyester staples fibres - Specification (first revision)

45800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
5(Identification (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-3(Mean Linear Density (IS 234))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-3(Cut Length (IS 10014 Part-1))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-3(Average Elongation at Break (IS 235))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-3(Hollowness (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-3(Average Tenacity (IS 235))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-3(Crimp Reoval (For filing nonwoven Fiber Only) (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-3(Sinking Time (For spun lace fiber only)(IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Moisture Regain (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Isophthalic Acid (IS 16481))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Phosphorus Content (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Ultraviolet Resistence (IS 13162 Part-2))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Water Soluble Matter (IS 3456))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Anti Microbial activity Value (IS/ISO 20743))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Silicon Content (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Colour strength with reference to standard shade (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(L Colour Value (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Whiteness Index (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Resistance to ageing (fibres in sheet form at 40ºC for 168 h) (IS 7016Part-8))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Dry heat (hot air) shrinkage at 180ºC, for 30 min (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Commercial Mass (IS 7703 Part-3))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.4 & Table 6(Colour Fastness to Light (IS/ISO 105-B01))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.4 & Table 6(Colour Fastness to Washing (IS/ISO 105-C10))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.4 & Table 6(Colour Fastness to Rubbing (IS/ISO 105-X12))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.4 & Table 6("Colour Fastness to Perspiration (acidic and alkaline) (IS/ISO 105-E04)")	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(Free and releasable formaldehyde,)	-	2500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(Extractable heavy metals by artificial Acidic sweat/saliva (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(Mercury (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(b) Chromium III (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(d) Lead (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(e) Cadmium (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(f) Copper (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(g) Antimony (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(Pentachlorophenol (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(Pesticides (Sum parameter) (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(Banned pesticides (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(Banned azo colourants (arylamines) (IS 15570))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
8(Marking (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6 & Table-4(Colour difference with reference to standard shade (IS 17263))	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.6 & Table-7(c) Chromium VI (IS 15651))	-	3500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.2(Freedom from Major Defects)	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)
6.3(Lustre/Brightness)	-	37500	Rs.37500/- (Excluding additional test parameters per Table 7)

Complete

Included w.e.f. 07.10.2022

198

IS 17262 (2019)

Textiles – Polyester partially oriented yarn (POY) – Specification

45800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1, Table 11(UV resistance, 500 h, For UV resistant yarn only , IS 13162 (P2))	-	45800	-
6.1, Table 10(Moisture content , Annex D)	-	45800	-
6.1, Table 9(Unevenness of linear density ,(Upercent/CV percent), Max , micro debier, IS 7703 (Part 5))	-	45800	-
6.1, Table 8(Unevenness of linear density ,(Upercent/CV percent), Max , All deniers except micro debier, IS 7703 (Part 5))	-	45800	-
6.1, Table 7(Interlace as nips per metre Texturing , Draw warping/twisting ,Annex C)	-	45800	-
6.1, Table 6(Yarn elongation at break, IS 7703 (Part 2))	-	45800	-
6.1, Table 5(Yarn breaking tenacity,IS 7703 (Part 2))	-	45800	-
6.1, Table 4(No of filaments)	-	45800	-
6.1, Table 3(Linear density , IS 7703 (Part 1))	-	45800	-
6.1 & 8.2 - Table -3, Sl no. 7 (a)(All deniers except microdeniers)	-	45800	-
6.1 & 8.2 - Table -3, Sl no. 7 (b)(Microdeniers)	-	45800	-
6.1 & 8.2 - Table -3, Sl no. 7 ©(Dope dyed (all deniers))	-	45800	-
6.3(Freedom from Yarn Defects)	-	45800	-
6.4(Lustre/Brightness)	-	45800	-
6.5(Colour Fastness Properties of Dyed POY)	-	45800	-

Complete

199

IS 8058 (2018)

Pyridine - Specification (First Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	16500	-
4.2(Solubility)	-	16500	-
4.3(Identity and Purity - (Annex B))	-	16500	-
4.4 - Table 1 - Sl No - i(Relative density at 250C/250C - Annex A)	-	16500	-
4.4 - Table 1 - Sl No - iii(Boiling range at 760 mm Hg - Annex C)	-	16500	-
4.4 - Table 1 - Sl No - iv(Residue on evaporation - Annex D)	-	16500	-
4.4 - Table 1 - Sl No - v(Ammonium compounds (as NH4) - Annex E)	-	16500	-
4.4 - Table 1 - Sl No - vi(Chlorides (as Cl) - Annex G)	-	16500	-
4.4 - Table 1 - Sl No - vii(Copper (as Cu) - Annex H)	-	16500	-
4.4 - Table 1 - Sl No - viii(Oxidizable substances - Annex J)	-	16500	-
4.4 - Table 1 - Sl No - ix(Sulphates (as SO4) - Annex K)	-	16500	-
4.4 - Table 1 - Sl No - x(Moisture content - Annex L)	-	16500	-
4.4 - Table 1 - Sl No - xi(Colour, HU (Pt-Co scale) - IS 8768)	-	16500	-
4.4 - Table 1 - Sl No - ii(Pyridine content - Annex B)	-	16500	-

Complete

Included w.e.f. 07.10.2022

200

IS 10951 (2020)

Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion ( Second Revision )

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	20500	-
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	20500	-
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	20500	-
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	20500	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	20500	-
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	20500	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	20500	-
Clause 6.3.2,Table-8, Sl no.1(Charpy impact strength, KJ/m2, IS 13360 (Part 5/Sec 5))	-	20500	-
Clause 6.3.2,Table-8, Sl no.1(Hardness – Rockwell R, Shore D,IS 13360 (Part 5/Sec 13),IS 13360 (Part 5/Sec 11))	-	20500	-
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	20500	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	20500	-
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	20500	-
Clause 6.3.2,Table-8, Sl no.2(Flammability, mm/min,IS/ IEC 60695-11-10)	-	20500	-
Clause 6.3.2,Table-8, Sl no.2(Ignitability (Oxygen index), percent,IS 13360 (Part 6/Sec 19))	-	20500	-
Clause 6.3.2,Table-8, Sl no.3(Relative permittivity,IS 4486,IS 13360 (Part 7/Sec 1))	-	20500	-
Clause 6.3.2,Table-8, Sl no.3(Dissipation factor,IS 4486,IS 13360 (Part 7/Sec 1))	-	20500	-
Clause 6.3.2,Table-8, Sl no.3(Volume resistivity,IS 2071 (Part 1))	-	20500	-
Clause 6.3.2,Table-8, Sl no.3(Surface resistivity,IS 2071 (Part 1))	-	20500	-
Clause 6.3.2,Table-8, Sl no.3(Dielectric strength,IS 2584)	-	20500	-
Clause 6.3.2,Table-8, Sl no.4(Water absorption,%,IS 13360 (Part 8/ Sec 1))	-	20500	-
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	20500	-
Clause 6.4.1(All additives used in the material which is meant,for usage in contact with foodstuffs, pharmaceuticals,and drinking water are given in IS 16738 for guidance purpose only.)	-	20500	-
Clause 6.4.2(When the products are used in contact with ,foodstuffs, pharmaceuticals and drinking water, its requirements with respect to the material shall also be met as per clause 3.3, 3.4 and 3.5 of IS 10910.)	-	20500	-
Clause 6.4.2(Pigments and colourants, IS 9833, Annex D.1)	-	20500	-
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	20500	-
6.1(The material shall be uniform and free from foreign matter.)	-	20500	-

Complete

Included w.e.f. 07.10.2022

201

IS 10910 (1984)

Specification for polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Basic Resin,% of IS 10909)	-	20500	-
3.2(Material,% of IS 10909)	-	20500	-
3.3(Pigments & Colourants of IS 9833)	-	20500	-
3.4(Overall Migration of IS 9845)	-	20500	-

Complete

Included w.e.f. 07.10.2022

202

IS 4105 (2020)

Specification for Styrene ( Vinyl Benzene ) ( Second Revision )

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grade)	-	19800	-
4.1(Description)	-	19800	-
5.2(Marking)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 1(Colour, Annex A1)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 2(Relative density at 27/27°C, Annex A2)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 3(Refractive index at 27ºC, Annex A3)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 4(Freezing point ºC, Annex A4)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 5(Assay, percent by mass, Annex A5)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 6(Aldehyde, percent by mass, Annex A6)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 7(Peroxides, percent by mass, Annex A7)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 8(Sulphur, percent by mass of IS 1448 [P : 34])	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 9(Chlorides, percent by mass, Annex A8)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 10(Polymer content, ppm, Annex A9)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 11(Solubility of polymer in toluene, Annex A10)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 12(Inhibitor content (p-tertiary butyl catechol), ppm, Annex A11)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 13(Ethyl benzene, percent by mass, Annex A12)	-	19800	-
4.2 & 7.1 - Table -1, Sl no. 14(Alpha methyl styrene, percent by mass, Annex A12)	-	19800	-

Complete

Included w.e.f. 07.10.2022

203

IS 17261 (2022)

Textiles - Polyester continuous filament fully drawn yarns - Specification (first revision)

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification (IS 17261))	-	46500	-
5(Designation ( IS 17261))	-	46500	-
6.1 & Table-3(Linear Density)	-	46500	-
6.1 & Table-3(Uneveness U)	-	46500	-
6.1 & Table-3(Tenacity)	-	46500	-
6.1 & Table-3(Elongation)	-	46500	-
6.2 & Table-4(Moisture regain ( IS17261))	-	46500	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	46500	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	46500	-
6.2 & Table-4(Finish oil pick-up ( IS17261))	-	46500	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	46500	-
6.2 & Table-4(Anti-microbial activity value (IS/ISO 20743))	-	46500	-
6.2 & Table-4(Colour strength with reference to standard yarn ( IS17261))	-	46500	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE ( IS17261))	-	46500	-
6.3(Freedom From Defects)	-	46500	-
6.4 & Table-5(Lustre/Brightness TiO2 Content)	-	46500	-
6.5 & Table-6(Colour Fastness Rating To Light Change in colour)	-	46500	-
6.5 & Table-7(Colour Fastness Rating To Washing Change in colour)	-	46500	-
6.5 & Table-8(Colour Fastness Rating To Washing Staining)	-	46500	-
6.5 & Table-9(Colour Fastness Rating To Rubbing Dry)	-	46500	-
6.5 & Table-10(Colour Fastness Rating To Rubbing Wet)	-	46500	-
6.5 & Table-11(Colour Fastness Rating To Perspiration (acidic and alkaline) Change in colour)	-	46500	-
6.5 & Table-12(Colour Fastness Rating To Perspiration (acidic and alkaline) Staining)	-	46500	-
6.7 & table-7(Free and releasable formaldehyde)	-	46500	-
6.7 & table-7(Mercury (IS 15651))	-	46500	-
6.7 & table-7(Chromium III (IS 15651))	-	46500	-
6.7 & table-7(Chromium VI (IS 15651))	-	46500	-
6.7 & table-7(Lead (IS 15651))	-	46500	-
6.7 & table-7(Cadmium (IS 15651))	-	46500	-
6.7 & table-7(Copper (IS 15651))	-	46500	-
6.7 & table-7(Antimony (IS 15651))	-	46500	-
6.7 & table-7(Pentachlorophenol (IS 15651))	-	46500	-
6.7 & table-7(Pesticides (IS 15651))	-	46500	-
6.7 & table-7(Banned Pesticides (IS 15651))	-	46500	-
6.7 & table-7(Banned azo colourants (arylamines) (IS 15570))	-	46500	-
8(Marking (IS 17261))	-	46500	-
6.7 & Table 7(Colour Fastness Rating To Light Change in colour (IS/ISO 105-B01 or IS/ISO 105-B02))	-	46500	-
6.2 & Table-4(Phosphorus content ( IS17261))	-	46500	-

Complete

Included w.e.f. 07.10.2022

204

IS 5295 (2021)

Ethylene Glycol - Specification (Second Revision)

Fibre grade and general grade

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Free from suspended matter)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Colour, Hazen units/Pt-Co, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Relative density1) at 20/20 °C)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Distillation range at 760 mm Hg (a) Initial boiling point, °C Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2 (Chem)(Distillation range at 760 mm Hg (b) The temperature at which 95 ml of material shall distil, °C, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Moisture content, percent by mass, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Acidity (as acetic acid), ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at b) 275 nm, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at c) 350 nm, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Freezing point of equal volumes of material and water, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Iron content, ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Chlorides content (as Cl), ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Diethylene glycol content, ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Purity, percent, Min)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.
4.2, Table 1(Aldehyde as CH3CHO or HCHO, ppm, Max)	-	21000	Rs. 14900 for general grade and Rs.21000 for Fibre grade.

Complete

Included w.e.f. 07.10.2022

205

IS 4566 (2020)

Specification For Methylene Chloride ( Dichloromethane ) — Technical ( Second Revision

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Description)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(i)(Relative density at 27/27°C)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(ii)(Distillation range at a pressure of 1 bar (optional for grade 1))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(iii)(Residue on evapouration)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(iv)(Moisture)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(v)(Acidity (as Hcl))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(vi)(Free Chlorine)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(vii)(Aldehydes)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(viii)(Iron (as Fe))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(ix)(Heavy metals (as Pb))	-	19800	Complete Testing Charges
Cl.4.2, Table-1(x)(Resistance to potassium permanganate)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xi)(Nesslers reagent)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xii)(Resistance to sulphuric acid)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xiii)(Total impurities due to methyl chloride and chloroform)	-	19800	Complete Testing Charges
Cl.4.2, Table-1(xiv)(Purity)	-	19800	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

206

IS 5158 (1987)

Specification for phthalic anhydride,technical - (Second Revision)

10250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	10250	-
4.1(Packing)	-	10250	-
4.2(Marking)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 1(Crystallizing point, °C, Annex A2)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 2("Colour of the molten material, Hazen unit, Annex A3")	-	10250	-
0.2 & 2.2- Table -1, Sl no. 3(Colour of the molten material after heat treatment, Hazen unit, Annex A3)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 4(Free acidity, percent by mass, Annex A4)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 5(Total available acidity, percent by mass, Annex A5)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 6("Maleic anhydride and other oxidizable impurities, percent by mass of Annex A6")	-	10250	-
0.2 & 2.2- Table -1, Sl no. 7(Ash, ppm of Annex A7)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 8(Iron ( as Fe ), ppm, Annex A8)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 9(Naphthaquinone, ppm, Annex A9)	-	10250	-
0.2 & 2.2- Table -1, Sl no. 10(Naphthalene, ppm, Annex A10)	-	10250	-

Complete

Included w.e.f. 07.10.2022

207

IS 798 (2020)

Orthophosphoric Acid — Specification ( Third Revision )

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	14400	Complete Testing Charges
5.2.2 Table 1 (i)(Relative density )	-	14400	Complete Testing Charges
5.2.2 Table 1 (ii)(Orthophosphoric acid (H3 PO4 ))	-	14400	Complete Testing Charges
5.2.2 Table 1 (iii)(Iron (as Fe), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (iv)(Chlorides (as Cl), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (v)(Sulphates (as SO4 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (vi)(Arsenic (as As2 O3 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (vii)(Antimony (as Sb2 O3 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (viii)(Nitrates (as NO3 ),)	-	14400	Complete Testing Charges
5.2.2 Table 1 (ix)(Lead (as Pb), parts per million, Max)	-	14400	Complete Testing Charges
5.2.2 Table 1 (x)(Silica (as SiO2 ), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xi)(Calcium (as Ca) and Magnesium (as Mg), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xii)(Oxygen absorbed (as O),)	-	14400	Complete Testing Charges
5.2.2 Table 1 (xiii)(Volatile acids)	-	14400	Complete Testing Charges
5.2.2 Table 1 (xiv)(Manganese (as Mn), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xv)(Molybdenum (as Mo), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xvi)(Mercury (as Hg), )	-	14400	Complete Testing Charges
5.2.2 Table 1 (xvii)(Aluminium (as Al), )	-	14400	Complete Testing Charges

Complete

Included w.e.f. 07.10.2022

208

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1( Description)	-	11000	-
Cl No 3.2(Miscibility with Water)	-	11000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	11000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	11000	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	11000	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	11000	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	11000	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	11000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	11000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	11000	-

Complete

Included w.e.f. 07.10.2022

209

IS 15030 (2001)

Terephthalic acid - Specification

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1(Description)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(i) ] Annex A Ref to IS 2362(Moisture content)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(ii) ] Annex B(Colour)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(iii) ] Annex C(Ash content,)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(iv) ] Annex D(Acid value)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(v) ] Annex E & Annex J(Total of iron, cobalt, manganese and chromium)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J(Total of sodium, magnesium, potassium, calcium and Nickel)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(vii) ] Annex G Method A and C (4-carboxybenzaldehyde)	-	20500	-
Cl No 3.2 [ Table 1, Sl no.(viii) ] Annex G Method A and B(p-toluic acid,)	-	20500	-
Cl No 3.3(Particle Size)	-	20500	-

Complete

Included w.e.f. 07.10.2022

210

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	4566	-
5.2.1.2(MFI)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at yield)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at yield)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at break)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec7)(Flexural modulas)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec23)(Tear Strength)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec6)(Dart Impact strength)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec4)(Izod/Charpy impact strength)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec11)(Shore Aor D hardness)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 11/Sec1)(Coeffiicient of friction)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 6/Sec3)(Heat deflection temperature)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 6/Sec1)(Vicat softening temperature)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 6/Sec11)(Brittleness Temperature)	-	4566	-
Annex B of IS 4984 5.3.2 Table6(Oxidation induction time)	-	4566	-
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	10500	-
IS 3396(Surface resistivity)	-	4566	-
IS 3397(Volume resistivity)	-	4566	-
IS2584(Dielectric strength)	-	4566	-
IS 4486(Dissipation factor)	-	4566	-
IS 4486(Relative permittivity)	-	4566	-
5.5.6 IS 2530(Carbon black dispersion)	-	4566	-
5.4.3 10 ofIS 2530(Carbon black content)	-	4566	-
5.4.35 15 ofIS 2530(Colour fastness to daylight)	-	4566	-
5.4.2 13 ofIS 2530(Colour fastness to water)	-	4566	-
IS 13360(part8/Sec1)(Water absorption)	-	4566	-
5.4.1 12 of IS 2530(Colour bleeding)	-	4566	-
IS 13360(part 8/Sec9)(ESCR)	-	4566	-
IS 13360(part 9/Sec10)(Colour bleeding)	-	4566	-
Annex C of IS4984(Volatile content)	-	4566	-
IS13360(part8/sec 6/ASTMD 1434(Gas permeability)	-	4566	-
ISO 51505-2(Oxygen gas transmission rate)	-	4566	-
ISO 2528(Water vopour transmission rate)	-	4566	-
IS 13360(part 9/Sec9)/ASTME313(Yellowness index or whiteness index)	-	4566	-
4 of IS 7016 (part 8)(Oven ageing)	-	4566	-
IS 13360(part 9/Sec8)(Transparency)	-	4566	-
IS15827(Natural/artificial weathering)	-	4566	-
IS 13360(part 9/Sec7)(Specular gloss)	-	4566	-

Complete

Excluding- Cl 5.3.2, table 6 (iv(d)) Gas permeability test, Cl 5.3.2, table 6 (iv(e)) Oxygen Gas Transmission rate test and Cl 5.3.2, table 6 (iv(f)) Water Vapour rate test . Included w.e.f. 07.10.2022

First
Prev
6
7
8
9
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Atmy Analytical Labs Pvt. Ltd.

I-30,DLF Industrial Area, Phase-1, Faridabad, Faridabad, Haryana, 121003

9910808996 info@atmylabs.com

Scope List