BIS - LIMS (Laboratory Information Management System)

Central Institute of Petrochemical Engineering and Technology, Guwahati

NH 31, Near Assam Oil Petrol Pump, P.O Changsari, Guwahati, Assam, Guwahati, Kamrup, Assam, 781101

9337476507 cipetcstsguwahati@gmail.com

Scope List

Reset

38 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

upto DN 315 mm

49275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Polyethylene Resin)	-	5825	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
7.2(Length)	-	0.0	-
7.4 table -3 & 4(6.1 Dimensions)	-	800	ovality & visual appearance charges are inclusive
7.4.1.2(Ovality)	-	0.0	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	-
8.2(Longitudinal Reversion Test)	-	900	-
8.3(Carbon black)	-	1625	CBC & CBD ARE INCLUSIVE
8.4( Melt Flow Rate)	-	1100	-
8.5 (Oxidation Induction Time)	-	2200	-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	-
8.9 table-6(Elongation at Break)	-	1600	-
8.10(Slow Crack Growth Rate)	-	6000	-
5.3 (a)(Carbon Black Master Batch)	-	925	-
5.3(d)(Carbon Black Master Batch)	-	950	-
6.2(Colour)	-	250	identification of stripes charges are inclusive
8.6(Overall migration)	-	2000	-

Complete

31 Dec, 2026

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

TEXTILES — POLYPROPYLENE (PP) WOVEN, LAMINATED, BLOCK B

25700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	2000	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	1200	Linear density : 700/- Width of tape:500/-
5.4(Lamination for PP)	-	2000	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-
6.4(Ash Content)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-

Complete

31 Dec, 2026

Included w.e.f. 23.08.2024 Exclusion: Cl.6.5 (Air Permeability)

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

POLYPROPYLENE ( PP )/HIGH DENSITY POLYETHYLENE ( HDPE )

34505 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	7850	-
5.3(Lamination)	-	2050	-
5.4(Sack Fabrication)	-	7750	-
5.5(Capacity)	-	500	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	0	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	0	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	0	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	12880	-
7(PRINTING, PACKAGING AND MARKING)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	1500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2700	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	1100	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-

Complete

31 Dec, 2026

Included w.e.f. 20.08.2024

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

25 kg

20555.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	0	-
5.2 Table 1(Dimensions)	-	500.00	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Ends per dm)	-	500.00	-
5.2 Table 1(Picks per dm)	-	500.00	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500.00	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2200.00	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	2700.00	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1600.00	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	1100.00	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200.00	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.6(Capacity)	-	500.00	-
4.3.1(Bottom Seam)	-	500.00	-
4.3(Sacks)	-	500.00	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
4.2(Linear Density)	-	700	-
4.2(Width of tape)	-	500	-
5.2 Table 1(Dimensions)	-	0	-

Complete

31 Dec, 2026

Included w.e.f. 20.08.2024

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

PE MAN A50 D 045 or PE MAN A.50 D 090 or PE MAN A57D090

11600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	2000	-
2.3(Shape and Dimensions)	-	500	-
2.4(Mass )	-	500	-
2.5(Appearance and Surface Finish)	-	500	-
2.6(Colour Fastness)	-	0	Not Applicable as agreed between the purchaser and the supplier
2.7(Resistance to Stress)	-	1000	-
2.8(Resistance to Applied Load)	-	1000	-
2.9(Strength)	-	2100	-
2.1(Dimensional Stability)	-	2300	-
2.1(Crates)	-	700	-
2.2(Material)	-	1100	-
2.3(Shape and Dimensions)	-	500	-
2.4(Mass)	-	500	-
2.5(Appearance and surface finish)	-	500	-
2.6(Colour Fastness)	-	0	-
2.7(Resistance to stress)	-	1000	-
2.8(Resistance to Applied Load)	-	1000	-
2.9(Strength)	-	3400	Test Charge - 2200.00 Specimen Preparation - 1200.00
2.10(Dimensional Stability)	-	900	-
3(Marking)	-	0	-
2.1(Material Identification)	-	2000	-

Complete

31 Dec, 2026

Included w.e.f. 20.08.2024

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

PE 63/PE 80/PE 100

41813.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1325	Test Charge - 700.00 Sample Preparation - 625.00
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1100	Test Charge - 1100.00 Sample Preparation - 0.00
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2200	Test Charge - 2200.00 Sample Preparation - 0.00
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	925	Test Charge - 9250.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	900	Test Charge - 900.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	3000	Test Charge - 3000.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound ash content - Any Method)	-	1200	Test Charge - 1200.00 Sample Preparation - 0.00
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.3(Density of Higher olefin - IS 7328:2020)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.3(Olefin Constituents- 14333-2022)	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	925	Test Charge - 925.00 Sample Preparation - 0.00
5.3(Ash content- Any Method)	-	1200	Test Charge - 1200.00 Sample Preparation - 0.00
5.3(Toluene extract - Any Method)	-	900	Test Charge - 700.00 Sample Preparation - 0.00
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.3(Carbon black particle size - Any Method)	-	3000	Test Charge - 3000.00 Sample Preparation - 0.00
5.4(Antioxidant - Any Method)	-	0	-
6(Pipe Description - IS 14333-2022)	-	0	-
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.3(Coiling- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	Test Charge includes OD, Wall Thickness & Ovality
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	Test Charge - 4000.00 Sample Preparation - 0.00
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	Test Charge - 1600.00 Sample Preparation - 0.00
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4800	Test Charge - 4800.00 Sample Preparation - 0.00
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	11000	Test Charge - 11000.00 Sample Preparation - 0.00
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	Test Charge - 1600.00 Sample Preparation - 0.00
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1200	Test Charge - 700.00 Sample Preparation - 500.00
8.3(Carbon black content- IS 2530-1963)	-	925	Test Charge - 925.00 Sample Preparation - 0.00
8.3(Carbon black content Dispersion- IS 2530-1963)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100	Test Charge - 1100.00 Sample Preparation - 0.00
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2200	Test Charge - 2200.00 Sample Preparation - 0.00
8.6(Density-IS 7328:2020)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1800	Test Charge - 1300.00 Sample Preparation - 500.00
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1800	Test Charge - 1300.00 Sample Preparation - 500.00
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1800	Test Charge - 1300.00 Sample Preparation - 500.00
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	6000	Test Charge - 5500.00 Sample Preparation - 500.00
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	0	Already quoted
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	0	Already quoted
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	0	Already quoted
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	0	Already quoted
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0	Already quoted
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	0	Already quoted
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	900	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	Already quoted
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	Already quoted
5.2.1.1, T2(Compound ash content - Any Method)	-	0	Already quoted
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	Already quoted
5.3(Density of Higher olefin - IS 7328:2020)	-	0	Already quoted
5.3(Olefin Constituents- 14333-2022)	-	0	Already quoted
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	Already quoted
5.3(Ash content- Any Method)	-	0	Already quoted
5.3(Toluene extract - Any Method)	-	0	Already quoted
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0	Already quoted
5.3(Carbon black particle size - Any Method)	-	0	Already quoted
5.4(Antioxidant - Any Method)	-	0	Already quoted
6(Pipe Description - IS 14333-2022)	-	0	Already quoted
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.3(Coiling- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	0	Already quoted
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	Already quoted
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	0	Already quoted
8.3(Carbon black content- IS 2530-1963)	-	0	Already quoted
8.3(Carbon black content Dispersion- IS 2530-1963)	-	0	Already quoted
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	Already quoted
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	0	Already quoted
8.6(Density-IS 7328:2020)	-	0	Already quoted
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	0	Already quoted
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	0	Already quoted
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0	Already quoted
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	0	Already quoted
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	0	Already quoted

Complete

31 Dec, 2026

Included w.e.f. 28.08.2024 Exclusion: Cl.5.4 (Antioxidant - Any Method)

IS 16654 (2017)

Geosynthetics - Polyprophylene multifilament woven geobags for coastal and waterways protection - Specification

Type 1 & Type 2

117256.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1.1 Table 1 B (ii)(Apperent opening size)	-	700	Testing Charges-700.00 Specimen preparation charges-0
Cl 4.1.1 Table 1 A (i) (a)(Tensile strength, Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 A (ii) (a)(Elongation at designed tensile strength, Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iii)(Seam strength)	-	1100	Testing Charges-1100.00 Specimen preparation charges-00.00
Cl 4.1.1 Table 1 A (iv) (a)(Abrasion resistance, Machine Direction)	-	4075	Testing Charges-3075.00 Specimen preparation charges-1000.00
Cl 4.1.1 Table 1 A (v) (a)(Trapezodial tear strength, Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 A (vi)(Puncture resistance)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 B (i)(Water permeability)	-	1700	Testing Charges-1200.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 C (i)(Mass)	-	500	-
Cl 4.1.1 Table 1 C (ii) (a)(Length of geobag, Small size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (a)(Width of geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (a)(Mass of sand filled geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (v)(UV resistance after 500h)	-	92200.00	Testing Charges-2200.00 Specimen preparation charges-90000.00
Cl 4.1.1 Table 1 A (i) (b)(Tensile strength, Cross Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 A (ii) (b)(Elongation at designed tensile strength, Cross Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iv) (b)(Abrasion resistance, Cross Machine Direction)	-	4075	Testing Charges-3075.00 Specimen preparation charges-1000.00
Cl 4.1.1 Table 1 A (v) (b)(Trapezodial tear strength, Cross Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 C (ii) (b)(Length of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (b)(Width of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (b)(Mass of sand filled geobag, large size)	-	500	-
Cl 5(Marking)	-	3200	Testing Charges-3200.00 Specimen preparation charges-0.00
4.3(Prefabrication of Geobags)	-	4300	Testing Charges-4300.00 Specimen preparation charges-0.00
Cl 4.1.1 Table 1 B (ii)(Apperent opening size)	-	700	-
Cl 4.1.1 Table 1 A (i) (a)(Tensile strength, Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 A (ii) (a)(Elongation at designed tensile strength, Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iii)(Seam strength)	-	1600	-
Cl 4.1.1 Table 1 A (iv) (a)(Abrasion resistance, Machine Direction)	-	4075	-
Cl 4.1.1 Table 1 A (v) (a)(Trapezodial tear strength, Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 A (vi)(Puncture resistance)	-	1600	-
Cl 4.1.1 Table 1 B (i)(Water permeability)	-	700	-
Cl 4.1.1 Table 1 C (i)(Mass)	-	500	-
Cl 4.1.1 Table 1 C (ii) (a)(Length of geobag, Small size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (a)(Width of geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (a)(Mass of sand filled geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (v)(UV resistance after 500h)	-	92200	-
Cl 4.1.1 Table 1 A (i) (b)(Tensile strength, Cross Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 A (ii) (b)(Elongation at designed tensile strength, Cross Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iv) (b)(Abrasion resistance, Cross Machine Direction)	-	4075	-
Cl 4.1.1 Table 1 A (v) (b)(Trapezodial tear strength, Cross Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 C (ii) (b)(Length of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (b)(Width of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (b)(Mass of sand filled geobag, large size)	-	500	-
Cl 5(Marking)	-	0	-
4.3(Prefabrication of Geobags)	-	0	-

Complete

31 Dec, 2026

Included w.e.f. 28.08.2024

IS 16653 (2017)

Geosynthetics â€“ Needle punched nonwoven geobags for coastal and waterways protection â€“ Specification

Type 1 to 3

122031 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1.1 Table 1 A (iii)(Seam strength, percentage of actual fabric strength)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (vi)(CBR Puncture resistance (N))	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (i) (a)(Wide with tensile strength , Machine direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (ii) (a)(Elongation, Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iv)(Abrasion Resistance)	-	7275	Test Charge - 5275.00 Specimen Preparation Charges - 2000.00
Cl 4.1.1 Table 1 A (v) (a)(Trapezoidal tear strength, Machine Direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 B (i)(Permittivity)	-	1700	Test Charge - 1200.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 B (ii)(Water permittivity)	-	1700	Test Charge - 1200.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 B (iii)(Apparent opening size)	-	700	Test Charge - 700.00
Cl 4.1.1 Table 1 C (i)(Thickness at 2kpa)	-	500	-
Cl 4.1.1 Table 1 C (ii)(Polymer types)	-	2700	-
Cl 4.1.1 Table 1 C (iii)(Mass)	-	500	-
Cl 4.1.1 Table 1 C (iv) (a)(Length of geobag, Small size)	-	500	-
Cl 4.1.1 Table 1 C (v) (a)(Width of geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (vi) (a)(Mass of sand filled geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (vii)(Durability)	-	0	-
Cl 4.1.1 Table 1 C (vii)(UV resistance after 500h)	-	95400	Test Charge - 4400.00 Specimen Preparation Charges - 91000.00
Cl 4.1.1 Table 1 A (i) (b)(Wide with tensile strength , Cross Machine direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (ii) (b)(Elongation, Cross Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (v) (b)(Trapezoidal tear strength, Cross Machine Direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 C (iv) (b)(Length of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (v) (b)(Width of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (vi) (b)(Mass of sand filled geobag, large size)	-	500	-
Cl 5(Marking)	-	500	-
Cl 4.1.3(The isophthalic acid content of the virgin polyester fiber)	-	2000	-
Cl 4.3(Prefabrication of Geobags)	-	4300	-
Cl 4.1.1 Table 1 A (iii)(Seam strength, percentage of actual fabric strength)	-	0	Already quoted
Cl 4.1.1 Table 1 A (vi)(CBR Puncture resistance (N))	-	0	Already quoted
Cl 4.1.1 Table 1 A (i) (a)(Wide with tensile strength , Machine direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (ii) (a)(Elongation, Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (iv)(Abrasion Resistance)	-	0	Already quoted
Cl 4.1.1 Table 1 A (v) (a)(Trapezoidal tear strength, Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 B (i)(Permittivity)	-	0	Already quoted
Cl 4.1.1 Table 1 B (ii)(Water permittivity)	-	0	Already quoted
Cl 4.1.1 Table 1 B (iii)(Apparent opening size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (i)(Thickness at 2kpa)	-	0	Already quoted
Cl 4.1.1 Table 1 C (ii)(Polymer types)	-	0	Already quoted
Cl 4.1.1 Table 1 C (iii)(Mass)	-	0	Already quoted
Cl 4.1.1 Table 1 C (iv) (a)(Length of geobag, Small size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (v) (a)(Width of geobag, small size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vi) (a)(Mass of sand filled geobag, small size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vii)(Durability)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vii)(UV resistance after 500h)	-	0	Already quoted
Cl 4.1.1 Table 1 A (i) (b)(Wide with tensile strength , Cross Machine direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (ii) (b)(Elongation, Cross Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (v) (b)(Trapezoidal tear strength, Cross Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 C (iv) (b)(Length of geobag, large size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (v) (b)(Width of geobag, large size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vi) (b)(Mass of sand filled geobag, large size)	-	0	Already quoted
Cl 5(Marking)	-	0	Already quoted
Cl 4.1.3(The isophthalic acid content of the virgin polyester fiber)	-	0	Already quoted
Cl 4.3(Prefabrication of Geobags)	-	0	Already quoted

Complete

31 Dec, 2026

Included w.e.f. 28.08.2024

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

PE 80 and PE 100/16-315 mm/ SDR 9, 11, 13.6 & 17

402000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	0	-
4.3(Nominal Diameter)	-	0	-
4.4(Colour)	-	0	-
5.1(Polyethylene compound)	-	48900	Test Charge - 8400.00 Specimen Preparation Charge - 40500.00
5.7(PE Compound Quality Evaluation)	-	400000	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	Test Charge - 1000.00 Specimen Preparation Charge - 4000.00 *Cost of chemicals will be extra or supplied by the party
5.6(Resistance to Weathering)	-	51500	Test Charge - 2300.00 Specimen Preparation Charge - 40500.00
6.1(Outside Diameter)	-	500	-
6.2(Wall Thickness)	-	500	-
7(Finish)	-	500	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	11000	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4500	Test Charge - 4000.00 Specimen Preparation Charge - 500.00
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	5300	Test Charge - 4800.00 Specimen Preparation Charge - 500.00
8.2(Reversion Test)	-	700	-
8.3(Density)	-	700	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
8.7(Volatile Matter Content)	-	700	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1800	Test Charge - 1300.00 Specimen Preparation Charge - 500.00
8.9(Resistance to Weathering)	-	15500	Test Charge - 14500.00 Specimen Preparation Charge - 1000.00
6.4(Length of Pipe)	-	500	-
8.4(Melt Flow Rate (MFR))	-	1100	-
8.5(Pigment Dispersion)	-	700	-
8.10(Slow Crack Growth Rate Test)	-	10800	Test Charge - 10300.00 Specimen Preparation Charge - 500.00
8.11(Squeeze-off)	-	6600	Test Charge - 6100.00 Specimen Preparation Charge - 500.00
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	700	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	-
5.1, 5.7 Table 2(iv) Volatile content)	-	700	-
5.1, 5.7 Table 2(v) Water content1))	-	700	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	700	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	10800	Test Charge - 10300.00 Specimen Preparation Charge - 500.00
5.6(ii) Hydraulic characteristics)	-	11500	Test Charge - 11000.00 Specimen Preparation Charge - 500.00
5.6(iii) Thermal stability (Oxidation induction time))	-	2200	-
8.1(Hydraulic Characteristics)	-	20800	Test Charge - 19800.00 Specimen Preparation Charge - 1000.00
8.2(Reversion test)	-	700	-
8.3(Density)	-	700	-
8.4(Melt Flow Rate)	-	1100	-
8.5(Pigment Dispersion)	-	700	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
8.7(Volatile Matter Content)	-	700	-
8.9(Resistance to Weathering)	-	0	Already quoted
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	Already quoted
8.10(Slow Crack Growth Rate Test)	-	0	Already quoted
8.11(Squeeze-of)	-	0	Already quoted
10(Marking)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	5000	Test Charge - 1000.00 Specimen Preparation Charge - 4000.00 *Cost of chemicals will be extra or supplied by the party
5.3(Anti-oxidant)	-	0	-
5.4(U-V stabilizer)	-	2500	Facility not available
5.3(Anti-Oxidant)	-	0	-
5.4(U.V. Stabilizer)	-	0	Already quoted
6.1(Out of Roundness (Ovality))	-	0	-
6(Dimensions of pipes)	-	0	Already quoted
7(Finish)	-	0	Already quoted
4.2(Grade of material)	-	0	-
4.3(Nominal Diameter)	-	0	-
4.4(Colour)	-	0	-
5.1(Polyethylene compound)	-	0	Already quoted
5.7(PE Compound Quality Evaluation)	-	0	Already quoted
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	0	Already quoted
5.6(Resistance to Weathering)	-	0	Already quoted
6.1(Outside Diameter)	-	0	Already quoted
6.2(Wall Thickness)	-	0	Already quoted
7(Finish)	-	0	Already quoted
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	0	Already quoted
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	0	Already quoted
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	0	Already quoted
8.2(Reversion Test)	-	0	Already quoted
8.3(Density)	-	0	Already quoted
8.6(Thermal Stability (Oxidation Induction Time))	-	0	Already quoted
8.7(Volatile Matter Content)	-	0	Already quoted
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	Already quoted
8.9(Resistance to Weathering)	-	0	Already quoted
6.4(Length of Pipe)	-	0	Already quoted
8.4(Melt Flow Rate (MFR))	-	0	Already quoted
8.5(Pigment Dispersion)	-	0	Already quoted
8.10(Slow Crack Growth Rate Test)	-	0	Already quoted
8.11(Squeeze-off)	-	0	Already quoted
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	0	Already quoted
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	0	Already quoted
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	0	Already quoted
5.1, 5.7 Table 2(iv) Volatile content)	-	0	Already quoted
5.1, 5.7 Table 2(v) Water content1))	-	0	Already quoted
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	0	Already quoted
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	Already quoted
5.6(ii) Hydraulic characteristics)	-	0	Already quoted
5.6(iii) Thermal stability (Oxidation induction time))	-	0	Already quoted
8.1(Hydraulic Characteristics)	-	0	Already quoted
8.2(Reversion test)	-	0	Already quoted
8.3(Density)	-	0	Already quoted
8.4(Melt Flow Rate)	-	0	Already quoted
8.5(Pigment Dispersion)	-	0	Already quoted
8.6(Thermal Stability (Oxidation Induction Time))	-	0	Already quoted
8.7(Volatile Matter Content)	-	0	Already quoted
8.9(Resistance to Weathering)	-	0	Already quoted
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	Already quoted
8.10(Slow Crack Growth Rate Test)	-	0	Already quoted
8.11(Squeeze-of)	-	0	Already quoted
10(Marking)	-	0	Already quoted
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	Already quoted
5.3(Anti-oxidant)	-	0	-
5.4(U-V stabilizer)	-	0	Already quoted
5.3(Anti-Oxidant)	-	0	-
5.4(U.V. Stabilizer)	-	0	Already quoted
6.1(Out of Roundness (Ovality))	-	0	Already quoted
6(Dimensions of pipes)	-	0	Already quoted
7(Finish)	-	0	Already quoted
4.2(Grade of material)	-	0	Already quoted
4.3(Nominal Diameter)	-	0	Already quoted
4.4(Colour)	-	0	Already quoted
5.1(Polyethylene compound)	-	0	Already quoted
5.7(PE Compound Quality Evaluation)	-	0	Already quoted
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	0	Already quoted
5.6(Resistance to Weathering)	-	0	Already quoted
6.1(Outside Diameter)	-	0	Already quoted
6.2(Wall Thickness)	-	0	Already quoted
7(Finish)	-	0	Already quoted
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	0	Already quoted
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	0	Already quoted
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	0	Already quoted
8.2(Reversion Test)	-	0	Already quoted
8.3(Density)	-	0	Already quoted
8.6(Thermal Stability (Oxidation Induction Time))	-	0	Already quoted
8.7(Volatile Matter Content)	-	0	Already quoted
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	Already quoted
8.9(Resistance to Weathering)	-	0	Already quoted
6.4(Length of Pipe)	-	0	Already quoted
8.4(Melt Flow Rate (MFR))	-	0	Already quoted
8.5(Pigment Dispersion)	-	0	Already quoted
8.10(Slow Crack Growth Rate Test)	-	0	Already quoted
8.11(Squeeze-off)	-	0	Already quoted
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	0	Already quoted
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	0	Already quoted
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	0	Already quoted
5.1, 5.7 Table 2(iv) Volatile content)	-	0	Already quoted
5.1, 5.7 Table 2(v) Water content1))	-	0	Already quoted
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	0	Already quoted
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	Already quoted
5.6(ii) Hydraulic characteristics)	-	0	Already quoted
5.6(iii) Thermal stability (Oxidation induction time))	-	0	Already quoted
8.1(Hydraulic Characteristics)	-	0	Already quoted
8.2(Reversion test)	-	0	Already quoted
8.3(Density)	-	0	Already quoted
8.4(Melt Flow Rate)	-	0	Already quoted
8.5(Pigment Dispersion)	-	0	Already quoted
8.6(Thermal Stability (Oxidation Induction Time))	-	0	Already quoted
8.7(Volatile Matter Content)	-	0	Already quoted
8.9(Resistance to Weathering)	-	0	Already quoted
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	Already quoted
8.10(Slow Crack Growth Rate Test)	-	0	Already quoted
8.11(Squeeze-of)	-	0	Already quoted
10(Marking)	-	0	Already quoted
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	Already quoted
6.1(Out of Roundness (Ovality))	-	0	Already quoted
6(Dimensions of pipes)	-	0	Already quoted
7(Finish)	-	0	Already quoted
5.3(Anti-oxidant)	-	0	-
5.4(U-V stabilizer)	-	0	Already quoted
5.3(Anti-Oxidant)	-	0	-
5.4(U.V. Stabilizer)	-	0	Already quoted

Complete

31 Dec, 2026

Included w.e.f. 28.08.2024 Exclusion: Cl.5.3 (Anti-oxidant), Cl. 5.4 (U-V stabilizer)

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Upto DN 315 mm

31025.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	All dimensions are included in this mentioned test charge
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
9.1(PIPE ENDS)	-	0	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	8501	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
10.7(Sulphated Ash Content)	-	950	-
11.2(Resistance to External Blows at 0°C)	-	1400	-
10.3(Effect on Water Test)	-	3000	-
6.1.2(PVC Resin)	-	4100	K Value & VCM content are included in the mentioned test charge

Complete

31 Dec, 2026

Hydraulic characteristics & resistance to external blow restricted up to 315mm.

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

ALL

19480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.3(Sacks)	-	300	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.4 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v(Mass of sack )	-	250	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	2200	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11130	-
5.2 and Table 1 x(Ash content )	-	950	-

Complete

31 Dec, 2026

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

ALL

24380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Dimensions Of Pipes)	-	250	-
Cl 8(Visual Appearance)	-	300	-
Cl 9.1(Hydraulic Characteristics)	-	18400	-
Cl 9.2(Fusion Compatibility)	-	4800	-
Cl 9.3(Reversion Test )	-	1000	-
Cl 9.4 & Annex B(Impact Strength)	-	1400	-
Cl 9.5(Density)	-	500	-
Cl 9.6(Melt Flow Rate)	-	1100	-
Cl 9.7(Carbon Black Content & Dispersion)	-	1625	CBC & CBD inclusive
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825	-
Cl 9.9(Opacity)	-	575	-

Complete

31 Dec, 2026

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

ALL

16525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Compound Properties)	-	1100	-
6.3.1 Annex B(Chloride content)	-	8600	-
9.1(Visual Appearance)	-	550	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	-
10(Mechanical Properties)	-	1725	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	3450	-

Complete

31 Dec, 2026

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

ALL

19630 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.3.1(The two rows of stitches shall be separated from each other)	-	300	-
4.4(Bottom seam of the loose liner)	-	250	-
4.5 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
5.2 and Table 1 x(Ash content )	-	950	-

Complete

31 Dec, 2026

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

ALL

18330 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250.00	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0.0	NA
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0.0	NA
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0.0	NA
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0.0	NA
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0.0	NA
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	1100	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
4.2 and Table 1 x(Ash content )	-	950	-

Complete

31 Dec, 2026

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

UPTO DN 315

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour of fittings)	-	300	-
10(Workmanship)	-	300	-
7.1,Table 1(Wall thickness)	-	0	-
7.2 ,Table 2&3(Socket Dimensions)	-	500	-
12.1(Visual appearance)	-	300	-
12.2(Stress relief test)	-	700	-
12.3(Vicat softening tempewrature)	-	1100	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	-
Cl.15, Annex B(Sulphated Ash Content)	-	950	-
16.1(Impact test)	-	1000	8950 FOR PRODUCT & 2300 FOR RAW MATERIAL.TOTAL IS 11250

Complete

31 Dec, 2026

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

ALL

18930 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	-
3.2(Tapes – Width )	-	0.0	-
3.2(Tapes – Linear Density )	-	0.0	Attached separately
3.4(Sack)	-	0.0	-
3.4.1(Seam)	-	0.0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	-
4.1 and Table 1 ii(Ends per dm )	-	250	-
4.1 and Table 1 iii(Picks per dm )	-	250	-
4.2 and Table 1 iv(Mass of sack )	-	250	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	Tensile Strength & Elongation charges are inclusive
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	Tensile Strength & Elongation charges are inclusive
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0.0	Mentioned above
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0.0	Mentioned above
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	Lengthwise & width wise test charges are inclusive
4.1 and Table 1 ix(Ash content )	-	950	-
3.3(Tying Cord)	-	0.0	-

Complete

31 Dec, 2026

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

UPTO DN 315

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(REQUIREMENTS)	-	300	-
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	3000	-
4.8(Dissolution)	-	400	-
4.9 and 6.1(Viscosity)	-	1100	-
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	0	-
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	0	-
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	3800	-
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	850	-

Complete

31 Dec, 2026

upto DN 315

IS 13958 (1994)

Bamboo Mat Board For General Purposes -specification

ALL

17375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions and tolerances)	-	1200	-
7.1(Workmanship and finish)	-	300	-
7.2(Workmanship and finish)	-	0	-
9.3.1(Internal bond strength in Dry State)	-	1350	-
9.3.2(Internal bond strength in Wet State)	-	1350	-
9.4.2(surface strength test in Wet State)	-	2025	-
9.4.3(Mycological Test)	-	7650	-
5.2(Application of Adhesive)	-	1800	-
5.4(Assembly)	-	650	-

Complete

31 Dec, 2026

IS 13714 (1993)

Dunnage pallets - Warehousing - Specification

ALL

3550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(DIMENSIONS)	-	750	-
5.1.2(Timber)	-	700	-
5.1.2.1 (Objectionable knots)	-	300	-
6.1.2(CONSTRUCTION)	-	1500	-
7(WORKMANSHIP AND FINISH)	-	300	-

Complete

31 Dec, 2026

Resistance to external blow restricted up to 315mm.

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

ALL

17100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	-
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	-
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0.0	INCLUDED ABOVE
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	4850	3500+1350
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1350	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1000	-

Complete

31 Dec, 2026

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

ALL

11725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2(K-Value as per IS-4669)	-	1100	-
5.0(Colour of Pipes)	-	300	-
9.1( Visual Appearance)	-	0	colour & visual appearance are inclusive to above charge
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	1500	all
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	all dimensions added to above charge
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	-
8.4(Sealing rings - Hardness)	-	375	-
9.2(Internal Diameter)	-	350	-
9.3(Density IS 12235 (Part 14))	-	500	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	-
9.5(Tensile Strength IS 12235(Part 13))	-	1600	-
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	-

Complete

31 Dec, 2026

Resistance to external blow restricted up to 315mm.

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

Upto DN 315

16425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	2150	-
4.1.c.i (Density)	-	1125	-
4.1.c.ii (Toluene extract - Annex A)	-	1100	-
4.1.c.iii (Volatile matter - Annex B )	-	700	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
6.1(Visual Appearance)	-	300	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test)	-	1350	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	-

Complete

31 Dec, 2026

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

All

18250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	nil
4.2.3(Carbon Dispersion Test)	-	700	nil
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	for net & gross capacity
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	for over all diameter
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	for over all height
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	for internal dia of man hole
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	for net & gross capacity
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	for overall diameter
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	for overall height
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	for internal dia of manhole
7.1.1(Resistance to Deformation)	-	700	nil
7.1.2(Resistance to Deformation)	-	700	nil
7.2(Resistance to Impact)	-	1100	nil
7.3(Test for Top Load Resistance)	-	1100	nil
7.4(Tensile Strength)	-	1350	nil
7.5(Flexural Modulus)	-	1350	nil
7.6(overall Migration)	-	2200	nil
9.2.1(Man-Hole and Hand-Hole Lids)	-	200	-
9.1(Man-Hole and Hand-Hole Lids)	-	3225	-
5.4(Wall Thickness above effective height)	-	250	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	Gross Capacity
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	Internal Manhole
5.3(Types and Features )	-	0	Visual Inspection of Flat area
5.6(Types and Features )	-	0	-
9.1(Lid Thickness)	-	0	-
6.1(Finish)	-	0	-

Complete

31 Dec, 2026

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

All

25330 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material )	-	1050	-
4.2 (Fabric)	-	250	-
4.3(Sacks)	-	300	-
4.4(Seam )	-	0	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	1050	-
4.4(Seam)	-	250	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	-
4.5(Lamination )	-	1250	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	400	-
4.7(and then stitching shall be done through six layers.)	-	250	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	1150	MASS & DIMENSIONS CHARGE ARE INCLUSIVE
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	-
5/5.6 (UV Resistance, )	-	10180	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	2200	-

Complete

31 Dec, 2026

IS 10889 (2004)

High density polyethylene films (First Revision)

All

11525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials)	-	2225	-
5.2(Black Compound)	-	1625	-
6.1.1(Appearance)	-	300	-
6.1.4(Density)	-	500	-
6.1.5(Melt Flow Rate)	-	1100	-
6.1.6(Black Film)	-	1625	-
6.2.1, Table 1(Nominal Thickness)	-	250	-
6.2.2, Table 2(Nominal Width)	-	250	-
6.3, Table 3(Yield Tolerance)	-	600	-
6.4.1(Tensile Strength at Break)	-	2200	Tensile strength & elongation at break are inclusive
6.4.2(Elongation at Break)	-	0	-
6.4.3(Impact Resistance (Falling Dart))	-	850	-

Complete

31 Dec, 2026

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

All

21360 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	1800	Linear density & WIDTH & identification all are inclusive
3.1(MANUFACTURE-Raw Material)	-	250	Visual appearance
3.2(MANUFACTURE-)	-	1500	-
3.3(Sacks)	-	250	-
3.3.1(Sacks-Table 1)	-	0	-
3.5(Bottom Seam-(see IS 10789).)	-	1050	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	500	-
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	250	-
4.1 , Table 1(REQUIREMENTS)	-	5050	-
4.2(UV Resistance)	-	8260	-
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	2200	-
4.3(Mass-(Annexure E))	-	250	-

Complete

31 Dec, 2026

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

All

1600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2(Manufacture)	-	500		dimension charge are inclusive
2.2.2(diameter of the socket of cap)	-	0		-

Complete

31 Dec, 2026

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

All

500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Union Laying Length)	-	500	All dimensions charges are inclusive
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2026

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

All

1600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	All dimensions charges are inclusive
2.2.2, Table 1(Socket Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2026

Bureau of Indian Standards

The National Standards Body of India

Central Institute of Petrochemical Engineering and Technology, Guwahati

NH 31, Near Assam Oil Petrol Pump, P.O Changsari, Guwahati, Assam, Guwahati, Kamrup, Assam, 781101

9337476507 cipetcstsguwahati@gmail.com

Scope List