BIS - LIMS (Laboratory Information Management System)

Central Institute of Petrochemical Engineering and Technology, Guwahati

NH 31, Near Assam Oil Petrol Pump, P.O Changsari, Guwahati, Assam, Guwahati, Kamrup, Assam, 781101

9337476507 cipetcstsguwahati@gmail.com

Scope List

Reset

38 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

All

1600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	all other dimensions are inclusive to this charge
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2026

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

All

1600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	500	all dimensions charges are inclusive
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2026

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

All

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	All parameters are included in this charge
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	0	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0	-

Complete

31 Dec, 2026

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

All

1600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Manufacture)	-	500	All dimensions charge are inclusive
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(socket length)	-	0	-

Complete

31 Dec, 2026

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

All

6725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0.0	socket length, Internal ID & tolerance all are inclusive in this charge
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0.0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0.0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	-
Cl. 6.2(Opacity- Appendix B)	-	575	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	All effect on water test parameters are included in this charge
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	-

Complete

31 Dec, 2026

IS 6192 (1994)

Textiles – Monoaxially oriented high density polyethylene tapes – Specification (second revision)

All

4250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1))	-	500	-
5.5(Thickness (For test method Refer IS 6193:1971))	-	250	-
5.4(Finished width (For test method Refer IS 6193:1971))	-	250	-
5.3(Elongation (For test method Refer IS 6193:1971))	-	1100	-
5.2(Tenacity (For test method Refer IS 6193:1971))	-	250	-
5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971) )	-	700	-
5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971) )	-	700	-
4(MATERIAL(Refer IS 7328 :1974))	-	500	-

Complete

31 Dec, 2026

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

upto DN 315mm

23925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(CLASSIFICATION OF PIPES)	-	0.0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
9.1(PIPE ENDS)	-	0	compiled with the test charges for cl no. 10.1
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
Clause 10.7(Sulphated Ash Content)	-	950	-
11.2(Resistance to External Blows at 0°C)	-	1400	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-

Complete

31 Dec, 2026

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

ALL

17725.00 View breakup
FOR OTHERS : Rs. 14350/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 7700/- GST for Low Density Polyethylene Films (Natural) Type III & IV Rs. 16925/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 10275/- + GST for Low Density Polyethylene Films(Black) Type III & IV. For PE Film & sheet - Raw Materials Rs. 2650/- + GST for Natural Compound Rs. 1500/- + GST for Black Compound. Rs. 4075/- + GST for Carbon Black Masterbatch (Optional). Rs. 5100/- + GST for Carbon Black Powder (Optional). FOR BIS : Rs. 12025/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 5900/- + GST for Low Density Polyethylene Films (Natural) Type III & IV. Rs. 13956/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 7831/- + GST for Low Density Polyethylene Films (Black) Type III & IV. For PE Film & sheet - Raw Materials. For PE Film & sheet - Raw Materials Rs. 1988/- + GST for Natural Compound. Rs. 375/- + GST for Black Compound. Rs. 3056/- + GST for Carbon Black Masterbatch (Optional). Rs. 3825/- + GST for Carbon Black Powder (Optional).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	500	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1225	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1225	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1225	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1225	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	875	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	875	-
8.1, Table 3(Puncture resistance , Annex C)	-	1100	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-

Complete

31 Dec, 2026

Bureau of Indian Standards

The National Standards Body of India

Central Institute of Petrochemical Engineering and Technology, Guwahati

NH 31, Near Assam Oil Petrol Pump, P.O Changsari, Guwahati, Assam, Guwahati, Kamrup, Assam, 781101

9337476507 cipetcstsguwahati@gmail.com

Scope List