BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt. Ltd. 1668 Sonipat

1668 (DIV-II), HSIIDC INDUSTRIAL ESTATE, RAI, DIST. SONEPAT, HARYANA, INDIA, Sonipat, Sonipat, Haryana, 131029

9310314585 bthdiv2@bharattesthouse.com

Scope List

Reset

223 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1(Brass sliding door bolts shall have satin finish or shall be polished or plated as specified by the purchaser)	-	1000	-
Cl. 8.2 (Ref. Cl. 11.1 of IS 1868:1996)( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-	1000	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-	1000	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	1000	-
3(TYPES)	-	1000	-
4(SIZES)	-	1000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-A)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-B)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-C)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-D)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-E)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-F)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-G)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-H)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-J)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-K)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-L)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-M)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-N)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-Q)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-S)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-T)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-W)	-	5000	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-A)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-B)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-C)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-D)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-E)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-F)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-G)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-H)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-J)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-K)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-L)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-M)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-Pin dia)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-R)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-T)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-U)	-	5000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-	5000	-
7.1(MANUFACTURE-General)	-	1000	-
7.1(MANUFACTURE-General)	-	1000	-
7.1(MANUFACTURE-General)	-	1000	-
7.1(MANUFACTURE-General)	-	1000	-
7.1(MANUFACTURE-General)	-	1000	-
7.2(MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-	1000	-
7.2(MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-	1000	-
8.1(FINISH)	-	1000	-
8.2(FINISH)	-	1000	-
8.2(FINISH-anodic casting -Min Avg thickness)	-	1000	-
8.2(FINISH-anodic casting -Min Local thickness)	-	1000	-
7.2(Brass/Aluminium alloy door bolt)	-	1000	-
7.2(Aluminium alloy door bolt)	-	1000	-
7.1(General)	-	1000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	5000	-
4.0(Sizes)	-	1000	-
3.1(Sliding Door Bolts)	-	1000	-
6.1 Fig 1(Dimensions & Tolerances)	-	5000	-

-
Included w.e.f.28.07.2025

IS 18476 (2023)

Fasteners ï¿½ Hexagon Washer Head Drilling Screws with Tapping Screw Thread

1 mm to 50 mm

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	1000	-
Clause. 4.0(Thread size.)	-	2000	-
Clause. 4.0(Length)	-	1000	-
Clause. 5.0(Material)	-	5000	-
Clause. 5.0(Thread)	-	2000	-
Clause. 5.0(Tolerances)	-	1000	-
Clause. 5.0(Mechnical and functional properties.)	-	7000	-
Clause. 5.0(Finish)	-	5000	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Designation)	-	100	-
Clause.6.0(Marking)	-	100	-
Clause. 4.0(Dimenssions.)	-	0	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	0	-
Clause. 5.0(Thread)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Mechnical and functional properties.)	-	0	-
Clause. 5.0(Finish)	-	0	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Designation)	-	0	-
Clause.6.0(Marking)	-	0	-

-
Included w.e.f 24.06.2025

IS 16468 (2016)

Medical textiles â€“ Absorbent cotton (Sterile and non-sterile) â€“ Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Workmanship and Finish)	-	200	-
4.1 - Table 1 - (i)(Fibre Identification)	-	2500	-
4.1 - Table 1 - (ii)(Foreign fibres)	-	2500	-
4.1 - Table 1 - (iii)(Neps max)	-	2500	-
4.1 - Table 1 - (iv)(Fluorescence)	-	4000	-
4.1 - Table 1 - (v)(Loss on drying)	-	1000	-
4.1 - Table 1 - (vi)(Absorbancy)	-	3000	-
4.1 - Table 1 - (vi) -(a)(Shrinking time)	-	3000	-
4.1 - Table 1 - (vi) -(b)(Water holding time)	-	3000	-
4.1 - Table 1 - (vii)(Ph of aqueous extract)	-	100	-
4.1 - Table 1 - (viii)(Extractable coloring matter)	-	2500	-
4.1 - Table 1 - (ix)(Water soluble substance)	-	1500	-
4.1 - Table 1 - (x)(Ether soluble substance)	-	1500	-
4.1 - Table 1 - (xi)(Sulphated ash)	-	1000	-
4.1 - Table 1 - (xiii)(Sterility)	-	0	-
6.1(Marking)	-	200	-
8(Packing)	-	200	-
4.1 - Table 1 - (xii)(Surface active substance)	-	2500	-

-
Included w.e.f 26.05.2025 Exclusion: Cl 4.1 - Table 1 - (xiii) (Sterility)

IS 8699 (1977)

Specification for pvc coated fabrics for footwear industry

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1 and 4.1, Table - 1 (ii)(Total Mass)	-	200	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Warp direction)	-	1000	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Weft direction)	-	1000	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage I ")	-	2000	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage II ")	-	2000	-
3.1.1 and 4.1, Table - 1 (v)(Thickness)	-	200	-
4.2(Appearance)	-	500	-
4.3(Colour , Grain, Embossing and finish)	-	500	-
4.4.1(Resistance to cold)	-	3000	-
4.4.2(Colour fastness to Dry and Wet Rubbing)	-	3000	-
4.4.3(Colour fastness to light)	-	8000	-
4.4.4(Resistance to heat and loss of mass of coating on heating)	-	2000	-
4.4.5(Stability at Vulcanization Temperature)	-	2000	-
4.5(Resistance to Gelling)	-	2000	-
4.5.1(Embossing on Grain)	-	1000	-
4.6(Adhesion of print (for Printed PVC Coated fabrics))	-	500	-
4.7(Adhesion of coating)	-	400	-

-
Included w.e.f.17.06.2025

IS 6809 (1990)

Rehabilitation equipment - Fixed height walking frame - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(shape and dimensions)	-	500	-
Cl-4.1(Framework)	-	2500	-
Cl-4.2(Hand Grip)	-	500	-
Cl-4.3(Ferrule)	-	500	-
Cl-4.4(Washers, Screws and Rivets)	-	2500	-
Cl-5(Construction)	-	500	-
Cl-6(Workmanship and finish)	-	100	-
Cl-7.1(Stability Test)	-	1000	-
Cl-7.2(Load Test)	-	1000	-
Cl-8(Marking)	-	500	-
Cl-3.1(shape and dimensions)	-	0	-
Cl-4.1(Framework)	-	0	-
Cl-4.2(Hand Grip)	-	0	-
Cl-4.3(Ferrule)	-	0	-
Cl-4.4(Washers, Screws and Rivets)	-	0	-
Cl-5(Construction)	-	0	-
Cl-6(Workmanship and finish)	-	0	-
Cl-7.1(Stability Test)	-	0	-
Cl-7.2(Load Test)	-	0	-
Cl-8(Marking)	-	0	-

-
Included w.e.f 03.06.2025

IS 7404 : Part 1 (1991)

Paper covered copper conductors - Specification: Part 1 round conductors (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General test conditions )	-	100	-
5(Conductor )	-	500	-
5.1(Material )	-	1000	-
5.2(Diameter )	-	1000	-
6.1(Grade of Paper)	-	7000	-
7(Application of paper )	-	1500	-
8(Overall diameter and increase in diameter )	-	500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	500	-
8.3(Measuring Equipment)	-	500	-
8.4(Measuring Method)	-	500	-
9(Packing and marking )	-	500	-
4(General test conditions )	-	0	-
5(Conductor )	-	0	-
5.1(Material )	-	0	-
5.2(Diameter )	-	0	-
6.1(Grade of Paper)	-	0	-
7(Application of paper )	-	0	-
8(Overall diameter and increase in diameter )	-	0	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	0	-
8.2(Multiple Paper Covering Special (S))	-	0	-
8.3(Measuring Equipment)	-	0	-
8.4(Measuring Method)	-	0	-
9(Packing and marking )	-	0	-
4(General test conditions )	-	0	-
5(Conductor )	-	0	-
5.1(Material )	-	0	-
5.2(Diameter )	-	0	-
6.1(Grade of Paper)	-	0	-
7(Application of paper )	-	0	-
8(Overall diameter and increase in diameter )	-	0	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	0	-
8.2(Multiple Paper Covering Special (S))	-	0	-
8.3(Measuring Equipment)	-	0	-
8.4(Measuring Method)	-	0	-
9(Packing and marking )	-	0	-
4(General test conditions )	-	0	-
5(Conductor )	-	0	-
5.1(Material )	-	0	-
5.2(Diameter )	-	0	-
6.1(Grade of Paper)	-	0	-
7(Application of paper )	-	0	-
8(Overall diameter and increase in diameter )	-	0	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	0	-
8.2(Multiple Paper Covering Special (S))	-	0	-
8.3(Measuring Equipment)	-	0	-
8.4(Measuring Method)	-	0	-
9(Packing and marking )	-	0	-

-
Included w.e.f. 31.07.2025

IS 13730 : Part 0 : Sec 1 (2018)

Specifications for particular types of winding wires: Part 0 general requirements: Sec 1 enamelled round copper wire (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	300	-
4.1(Conductor diameter)	-	300	-
4.2(Out of roundness of conductor)	-	300	-
4.3(Minimum increase in diameter due to the insulation and the bonding layer)	-	300	-
4.4(Maximum overall diameter)	-	300	-
5(Electrical resistance)	-	0	-
6(Elongation)	-	700	-
7(Springiness)	-	700	-
8.1(Mandrel winding test)	-	700	-
8.2(Stretching test)	-	700	-
8.3(Jerk test)	-	700	-
8.4(Peel test)	-	800	-
9(Heat shock)	-	800	-
10(Cut-through)	-	800	-
11(Resistance to abrasion)	-	700	-
12(Resistance to solvents)	-	800	-
13(Breakdown voltage)	-	0	-
13.1(General)	-	0	-
13.2(Nominal conductor diameters up to and including 0,100 mm)	-	0	-
13.3(Nominal conductor diameters over 0,100 mm up to and including 2,500 mm)	-	0	-
13.4(Nominal conductor diameters over 2,500 mm)	-	0	-
14(Continuity of insulation)	-	0	-
15(Temperature index)	-	0	-
16(Resistance to refrigerants)	-	800	-
17(Solderability)	-	0	-
18(Heat or solvent bonding)	-	0	-
19(Dielectric dissipation factor)	-	0	-
20(Resistance to transformer oil)	-	0	-
21(Loss of mass)	-	0	-
23(Pin hole test)	-	100	-
30(Packaging)	-	200	-

-
Included w.e.f.19.05.2025

IS 1115 (1986)

Specification for general purpose cutting oil, soluble (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General Requirement)	-	800	-
2.2 - Table 1 - (i)(Ash, Max)	-	700	-
2.2 - Table 1 - (ii)(Water, Max)	-	1000	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	1500	-
2.2 - Table 1 - (iv)(Frothing test)	-	1000	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	2500	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	2500	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	2000	-
2.2 - Table 1 - (viii)(Flash point)	-	1000	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	2000	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	1000	-
3(Packing and Marking)	-	500	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-

-
Included w.e.f.29.05.2025

IS 13382 (2018)

Cast iron specials for mechanical and push-on flexible joints for pressure pipes for water, gas and sewage - Specification (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Thickness Wall, mm )	-	500	-
7(Joints)	-	500	-
7.1(Type of Joints)	-	500	-
7.2(Push on joints)	-	500	-
7.3(Flange and mechanical joints)	-	500	-
7.4(Bolt and hole circle)	-	500	-
7.5(Flanges)	-	500	-
7.6(Flanges)	-	500	-
8(Rubber gaskets)	-	2000	-
8.2(Dimenmsions of Rubber gaskets)	-	500	-
10(Mechanical Test)	-	2300	-
10.1(Tensile Stregth, Mpa)	-	1500	-
10.2(Hardness, HBW)	-	800	-
11(Hydrostatic test)	-	3000	-
11.2(Withstand Hydrostatic Pressure)	-	3000	-
12(Sizes)	-	500	-
12.2(Dimensions, mm)	-	500	-
12.2(e)	-	500	-
12.2(R)	-	500	-
12.2(L)	-	500	-
12.2(Socket)	-	500	-
12.2(D)	-	500	-
12.2(Cylinder Pipe)	-	500	-
12.2(b)	-	500	-
12.2(D1)	-	500	-
12.2(W)	-	500	-
12.2(P)	-	500	-
12.2(X)	-	500	-
12.2(Y)	-	500	-
12.2(Z)	-	500	-
12.2(S)	-	500	-
12.2(Follower Gland)	-	500	-
12.2(D)	-	500	-
12.2(C )	-	500	-
12.2(E)	-	500	-
12.2(F)	-	500	-
12.2(Hole Dia)	-	500	-
12.2(N)	-	500	-
12.2(M)	-	500	-
12.2(A)	-	500	-
12.2(Dia of Bolt)	-	500	-
12.2(L)	-	500	-
12.2(No of Bolt)	-	500	-
12.2(Rubber Gasket )	-	500	-
12.2(N)	-	2000	-
12.2(Q)	-	500	-
12.2(R)	-	500	-
12.2(T)	-	500	-
12.2(U)	-	500	-
12.2(V)	-	500	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	2000	-
15(Internal Lining)	-	2000	-
15.1(Cement mortor lining)	-	1500	-
17.2(Flexible Joints)	-	1000	-
18.1(Positive internal hydrostatic pressure)	-	3000	-
18.3(Stregth and Leak tightness test for flanged joints)	-	3000	-
6(Thickness Wall, mm )	-	500	-
7(Joints)	-	500	-
7.1(Type of Joints)	-	500	-
7.2(Push on joints)	-	500	-
7.3(Flange and mechanical joints)	-	500	-
7.4(Bolt and hole circle)	-	500	-
7.5(Flanges)	-	500	-
7.6(Flanges)	-	500	-
10(Mechanical Test)	-	500	-
10.1(Tensile Stregth, Mpa)	-	500	-
10.2(Hardness, HBW)	-	500	-
11(Hydrostatic test)	-	500	-
11.2(Withstand Hydrostatic Pressure)	-	500	-
12(Sizes)	-	500	-
12.2(Dimensions, mm)	-	500	-
12.2(e)	-	500	-
12.2(R)	-	500	-
12.2(L)	-	500	-
12.2(Socket)	-	500	-
12.2(D)	-	500	-
12.2(Cylinder Pipe)	-	500	-
12.2(b)	-	500	-
12.2(D1)	-	500	-
12.2(W)	-	500	-
12.2(P)	-	500	-
12.2(X)	-	500	-
12.2(Y)	-	500	-
12.2(Z)	-	500	-
12.2(S)	-	500	-
12.2(Follower Gland)	-	500	-
12.2(D)	-	500	-
12.2(C )	-	500	-
12.2(E)	-	500	-
12.2(F)	-	500	-
12.2(Hole Dia)	-	500	-
12.2(N)	-	500	-
12.2(M)	-	500	-
12.2(A)	-	500	-
12.2(Dia of Bolt)	-	500	-
12.2(Q)	-	500	-
12.2(R)	-	500	-
12.2(T)	-	500	-
12.2(U)	-	500	-
12.2(V)	-	500	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	2000	-
15(Internal Lining)	-	2000	-
15.1(Cement mortor lining)	-	1500	-
17.2(Flexible Joints)	-	1000	-
18.1(Positive internal hydrostatic pressure)	-	3000	-
18.3(Stregth and Leak tightness test for flanged joints)	-	3000	-
8(Rubber gaskets)	-	2000	-
8.2(Dimenmsions of Rubber gaskets)	-	2000	-
12.2(L)	-	500	-
12.2(No of Bolt)	-	500	-
12.2(Rubber Gasket )	-	500	-
12.2(N)	-	500	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
6(Thickness Wall, mm )	-	0	-
7(Joints)	-	0	-
7.1(Type of Joints)	-	0	-
7.2(Push on joints)	-	0	-
7.3(Flange and mechanical joints)	-	0	-
7.4(Bolt and hole circle)	-	0	-
7.5(Flanges)	-	0	-
7.6(Flanges)	-	0	-
10(Mechanical Test)	-	0	-
10.1(Tensile Stregth, Mpa)	-	0	-
10.2(Hardness, HBW)	-	0	-
11(Hydrostatic test)	-	0	-
11.2(Withstand Hydrostatic Pressure)	-	0	-
12(Sizes)	-	0	-
12.2(Dimensions, mm)	-	0	-
12.2(e)	-	0	-
12.2(R)	-	0	-
12.2(L)	-	0	-
12.2(Socket)	-	0	-
12.2(D)	-	0	-
12.2(Cylinder Pipe)	-	0	-
12.2(b)	-	0	-
12.2(D1)	-	0	-
12.2(W)	-	0	-
12.2(P)	-	0	-
12.2(X)	-	0	-
12.2(Y)	-	0	-
12.2(Z)	-	0	-
12.2(S)	-	0	-
12.2(Follower Gland)	-	0	-
12.2(D)	-	0	-
12.2(C )	-	0	-
12.2(E)	-	0	-
12.2(F)	-	0	-
12.2(Hole Dia)	-	0	-
12.2(N)	-	0	-
12.2(M)	-	0	-
12.2(A)	-	0	-
12.2(Dia of Bolt)	-	0	-
12.2(Q)	-	0	-
12.2(R)	-	0	-
12.2(T)	-	0	-
12.2(U)	-	0	-
12.2(V)	-	0	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	0	-
15(Internal Lining)	-	0	-
15.1(Cement mortor lining)	-	0	-
17.2(Flexible Joints)	-	0	-
18.1(Positive internal hydrostatic pressure)	-	0	-
18.3(Stregth and Leak tightness test for flanged joints)	-	0	-
8(Rubber gaskets)	-	0	-
8.2(Dimenmsions of Rubber gaskets)	-	0	-
12.2(L)	-	0	-
12.2(No of Bolt)	-	0	-
12.2(Rubber Gasket )	-	0	-
12.2(N)	-	0	-
6(Thickness Wall, mm )	-	-	-
7(Joints)	-	-	-
7.1(Type of Joints)	-	-	-
7.2(Push on joints)	-	-	-
7.3(Flange and mechanical joints)	-	-	-
7.4(Bolt and hole circle)	-	-	-
7.5(Flanges)	-	-	-
7.6(Flanges)	-	-	-
8(Rubber gaskets)	-	-	-
8.2(Dimenmsions of Rubber gaskets)	-	-	-
10(Mechanical Test)	-	-	-
10.1(Tensile Stregth, Mpa)	-	-	-
10.2(Hardness, HBW)	-	-	-
11(Hydrostatic test)	-	-	-
11.2(Withstand Hydrostatic Pressure)	-	-	-
12(Sizes)	-	-	-
12.2(Dimensions, mm)	-	-	-
12.2(e)	-	-	-
12.2(R)	-	-	-
12.2(L)	-	-	-
12.2(Socket)	-	-	-
12.2(D)	-	-	-
12.2(Cylinder Pipe)	-	-	-
12.2(b)	-	-	-
12.2(D1)	-	-	-
12.2(W)	-	-	-
12.2(P)	-	-	-
12.2(X)	-	-	-
12.2(Y)	-	-	-
12.2(Z)	-	-	-
12.2(S)	-	-	-
12.2(Follower Gland)	-	-	-
12.2(D)	-	-	-
12.2(C )	-	-	-
12.2(E)	-	-	-
12.2(F)	-	-	-
12.2(Hole Dia)	-	-	-
12.2(N)	-	-	-
12.2(M)	-	-	-
12.2(A)	-	-	-
12.2(Dia of Bolt)	-	-	-
12.2(L)	-	-	-
12.2(No of Bolt)	-	-	-
12.2(Rubber Gasket )	-	-	-
12.2(N)	-	-	-
12.2(Q)	-	-	-
12.2(R)	-	-	-
12.2(T)	-	-	-
12.2(U)	-	-	-
12.2(V)	-	-	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	-	-
15(Internal Lining)	-	-	-
15.1(Cement mortor lining)	-	-	-
17.2(Flexible Joints)	-	-	-
18.1(Positive internal hydrostatic pressure)	-	-	-
18.3(Stregth and Leak tightness test for flanged joints)	-	-	-
6(Thickness Wall, mm )	-	-	-
7(Joints)	-	-	-
7.1(Type of Joints)	-	-	-
7.2(Push on joints)	-	-	-
7.3(Flange and mechanical joints)	-	-	-
7.4(Bolt and hole circle)	-	-	-
7.5(Flanges)	-	-	-
7.6(Flanges)	-	-	-
10(Mechanical Test)	-	-	-
10.1(Tensile Stregth, Mpa)	-	-	-
10.2(Hardness, HBW)	-	-	-
11(Hydrostatic test)	-	-	-
11.2(Withstand Hydrostatic Pressure)	-	-	-
12(Sizes)	-	-	-
12.2(Dimensions, mm)	-	-	-
12.2(e)	-	-	-
12.2(R)	-	-	-
12.2(L)	-	-	-
12.2(Socket)	-	-	-
12.2(D)	-	-	-
12.2(Cylinder Pipe)	-	-	-
12.2(b)	-	-	-
12.2(D1)	-	-	-
12.2(W)	-	-	-
12.2(P)	-	-	-
12.2(X)	-	-	-
12.2(Y)	-	-	-
12.2(Z)	-	-	-
12.2(S)	-	-	-
12.2(Follower Gland)	-	-	-
12.2(D)	-	-	-
12.2(C )	-	-	-
12.2(E)	-	-	-
12.2(F)	-	-	-
12.2(Hole Dia)	-	-	-
12.2(N)	-	-	-
12.2(M)	-	-	-
12.2(A)	-	-	-
12.2(Dia of Bolt)	-	-	-
12.2(Q)	-	-	-
12.2(R)	-	-	-
12.2(T)	-	-	-
12.2(U)	-	-	-
12.2(V)	-	-	-
14(Coating Test at 0 and 65 Degree Centegrade)	-	-	-
15(Internal Lining)	-	-	-
15.1(Cement mortor lining)	-	-	-
17.2(Flexible Joints)	-	-	-
18.1(Positive internal hydrostatic pressure)	-	-	-
18.3(Stregth and Leak tightness test for flanged joints)	-	-	-
8(Rubber gaskets)	-	-	-
8.2(Dimenmsions of Rubber gaskets)	-	-	-
12.2(L)	-	-	-
12.2(No of Bolt)	-	-	-
12.2(Rubber Gasket )	-	-	-
12.2(N)	-	-	-

-
Included w.e.f 04.09.2025

100

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

All Grade / Type / Size / Designation

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	1000	-
As per clause 7(CARBON)	-	2500	-
As per clause 7(SILICON)	-	2500	-
As per clause 7(MANGANESE)	-	2500	-
As per clause 7(PHOSPHORUS)	-	2500	-
As per clause 7(SULPHUR)	-	2500	-
As per clause 7(CHROMIUM)	-	2500	-
As per clause 7(MOLYBEDNUM)	-	2500	-
As per clause 7(NICKEL)	-	2500	-
As per clause 7(NITROGEN)	-	2500	-
As per clause 7(COPPER)	-	2500	-
As per clause 7(NIOBIUM)	-	2500	-
As per clause 7(TITANIUM)	-	2500	-
As per clause 7(ALUMINIUM)	-	2500	-
As per clause 8(HEAT TREATMENT)	-	100	-
As per clause 9(Dimension Tolerance)	-	500	-
As per clause 10(TENSILE TEST)	-	1500	-
As per clause 10.2(REVERSE BEND TEST)	-	1000	-
As per clause 10.3(TORSION TEST)	-	1000	-
As per clause 14(FINISH)	-	300	-
As per clause 15(CORROSION RESISTANCE)	-	1000	-
As per clause 16.2(MARKING)	-	200	-
As per Clause 6(FREEDOM FROM DEFECTS)	-	0	-
As per clause 7(CARBON)	-	0	-
As per clause 7(SILICON)	-	0	-
As per clause 7(MANGANESE)	-	0	-
As per clause 7(PHOSPHORUS)	-	0	-
As per clause 7(SULPHUR)	-	0	-
As per clause 7(CHROMIUM)	-	0	-
As per clause 7(MOLYBEDNUM)	-	0	-
As per clause 7(NICKEL)	-	0	-
As per clause 7(NITROGEN)	-	0	-
As per clause 7(COPPER)	-	0	-
As per clause 7(NIOBIUM)	-	0	-
As per clause 7(TITANIUM)	-	0	-
As per clause 7(ALUMINIUM)	-	0	-
As per clause 8(HEAT TREATMENT)	-	0	-
As per clause 9(Dimension Tolerance)	-	0	-
As per clause 10(TENSILE TEST)	-	0	-
As per clause 10.2(REVERSE BEND TEST)	-	0	-
As per clause 10.3(TORSION TEST)	-	0	-
As per clause 14(FINISH)	-	0	-
As per clause 15(CORROSION RESISTANCE)	-	0	-
As per clause 16.2(MARKING)	-	0	-
As per Clause 6(FREEDOM FROM DEFECTS)	-	0	-
As per clause 7(CARBON)	-	0	-
As per clause 7(SILICON)	-	0	-
As per clause 7(MANGANESE)	-	0	-
As per clause 7(PHOSPHORUS)	-	0	-
As per clause 7(SULPHUR)	-	0	-
As per clause 7(CHROMIUM)	-	0	-
As per clause 7(MOLYBEDNUM)	-	0	-
As per clause 7(NICKEL)	-	0	-
As per clause 7(NITROGEN)	-	0	-
As per clause 7(COPPER)	-	0	-
As per clause 7(NIOBIUM)	-	0	-
As per clause 7(TITANIUM)	-	0	-
As per clause 7(ALUMINIUM)	-	0	-
As per clause 8(HEAT TREATMENT)	-	0	-
As per clause 9(Dimension Tolerance)	-	0	-
As per clause 10(TENSILE TEST)	-	0	-
As per clause 10.2(REVERSE BEND TEST)	-	0	-
As per clause 10.3(TORSION TEST)	-	0	-
As per clause 14(FINISH)	-	0	-
As per clause 15(CORROSION RESISTANCE)	-	0	-
As per clause 16.2(MARKING)	-	0	-
As per Clause 6(FREEDOM FROM DEFECTS)	-	0	-
As per clause 7(CARBON)	-	0	-
As per clause 7(SILICON)	-	0	-
As per clause 7(MANGANESE)	-	0	-
As per clause 7(PHOSPHORUS)	-	0	-
As per clause 7(SULPHUR)	-	0	-
As per clause 7(CHROMIUM)	-	0	-
As per clause 7(MOLYBEDNUM)	-	0	-
As per clause 7(NICKEL)	-	0	-
As per clause 7(NITROGEN)	-	0	-
As per clause 7(COPPER)	-	0	-
As per clause 7(NIOBIUM)	-	0	-
As per clause 7(TITANIUM)	-	0	-
As per clause 7(ALUMINIUM)	-	0	-
As per clause 8(HEAT TREATMENT)	-	0	-
As per clause 9(Dimension Tolerance)	-	0	-
As per clause 10(TENSILE TEST)	-	0	-
As per clause 10.2(REVERSE BEND TEST)	-	0	-
As per clause 10.3(TORSION TEST)	-	0	-
As per clause 14(FINISH)	-	0	-
As per clause 15(CORROSION RESISTANCE)	-	0	-
As per clause 16.2(MARKING)	-	0	-

-
Included w.e.f 04.08.2025

101

IS 14434 (2023)

POLYCARBONATE MOULDING AND EXTRUSION MATERIALS SPECIFICATION

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2.2(Filler Content)	-	1000	-
5(Melt Volume-Flow Rate (MVR))	-	1500	-
5.2(Specific Gravity)	-	1000	-
5.3(Flexural Modulus)	-	1500	-
5.4(Charpy Impact Strength, Notched)	-	1500	-
5.5(Deflection Temperature Under 1.82 MPa)	-	1500	-
5.6.1.2(Overall migration)	-	1000	-
4.2.5.2 Table 6 Sr.No.(i)(Volume resistivity)	-	0	-
4.2.5.2 Table 6 Sr.No.(ii)(Dielectric strength)	-	0	-
4.2.5(Flammability)	-	2000	-
4.2.5(Optical Properties(% Transmittance))	-	2500	-
4.2.5.2 Table 6 Sr.No.(ii)(Dielectric Constant)	-	0	-
4.2.5.2 Table 6 Sr.No.(ii)(Dissipation factor)	-	0	-
4.1(General)	-	1000	-
4.2.2.1(Data Block 2)	-	1000	-
4.2.2.2(Block 2)	-	1000	-
4.2.3(Data Block 3)	-	1000	-
4.2.4 (a)(Melt volume-flow rate)	-	1500	-
4.2.4 (b)(Specific gravity)	-	1000	-
4.2.4 (c)(Flexural modulus)	-	1500	-
4.2.4 (e)(Deflection temperature)	-	1500	-
4.2.5.2 Table - 6 (i)(Volume resistivity, Min, ohm-cm)	-	0	-
4.2.5.2 Table - 6 (ii)(Dielectric strength, Min, kV/mm)	-	0	-
4.2.5.2 Table - 6 (iii)(Dielectric constant at 1 MHz, Max)	-	0	-
4.2.5.2 Table - 6 (iv)(Dissipation factor at 1 MHz, Max)	-	0	-
5.6.1.1(Pigments and colourants)	-	3000	-
5.6.1.2(Overall migration)	-	1000	-
5.6.1.3(Storage and control)	-	200	-
6(Preparation of Test Specimens)	-	200	-
8(Packing and Marking)	-	200	-
4.2.4 (d)(Impact strength)	-	1500	-

-
Included w.e.f 23.07.2025 Scope restricted to Data Block 1,2,3&4 only

102

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	10000	-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	2500	-
11(Transverse Tension Test,%)	-	2500	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	2500	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	1500	-
14(Reverse Flattaning Test)	-	1500	-
15(Flattaning Test-IS 2328)	-	1500	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	5000	-
18(Leak Tighteness Test)	-	1500	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	1000	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	1000	-
22(Workmanship, Finish and Appearance)	-	500	-
23(Repair by Welding or Grinding)	-	500	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	1000	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	1000	-
Clause 10.1 - Table 4(Tensile Strength)	-	2500	-
Clause 10.1 - Table 4(Yield Strength)	-	2500	-
Clause 10.1 - Table 4(Percent Elongation)	-	2500	-
Clause 11(Transverse Tension Test)	-	2500	-
Clause 12(Hardness Test)	-	2500	-
Clause 13(Flange Test)	-	1500	-
Clause 14(Reverse Flattening Test)	-	1500	-
Clause 15(Flattening Test)	-	1500	-
Clause 16(Grain Size)	-	5000	-
Clause 18()	-	1500	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	1000	-
Clause 22(Workmanship, Finish & Appearance)	-	500	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	1000	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	1000	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	1000	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	1000	-
12.2(Hardness test)	-	2500	-
17(Sampling)	-	500	-
25(Marking)	-	500	-
6.7, Table 7, ii)(c) Chromium VI)	-	1000	-

-
Included w.e.f 11.07.2025

103

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

All Ferritic steels , Martensitic steels , Austenitic steels, Duplex

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	8000	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	2000	-
11(Transverse Tension Test,%)	-	2500	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	1500	-
13 (Table No.- 7)(Flaring Test)	-	1000	-
14(Flattaning Test-IS 2328)	-	1000	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	2000	-
17(Leak Tighteness Test)	-	1000	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	1000	-
19(Eddy current test & Air under water)	-	1000	-
21(Workmanship, Finish and Appearance)	-	500	-
22(Repair by Welding or Grinding)	-	500	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	800	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	800	-
Clause 10.1 - Table 4(Tensile Strength)	-	2000	-
Clause 10.1 - Table 4(Percent Elongation)	-	2000	-
Clause 11(Transverse Tension Test)	-	2500	-
Clause 12(Hardness Test)	-	1500	-
Clause 13(Flaring Test)	-	1000	-
Clause 14(Flattening Test)	-	1000	-
Clause 15(Grain Size)	-	2000	-
Clause 17(Leak Tightness Test)	-	1000	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	1000	-
Clause 21(Workmanship, Finish & Appearance)	-	500	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	500	-
10.2(Hardness test IS 1500 (part-1):2019)	-	1500	-
12.2(Flaring test IS 17878:2022)	-	1000	-
16(Sampling)	-	0	-
24(Marking)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	800	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	800	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	800	-
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	0	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	0	-
11(Transverse Tension Test,%)	-	0	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	0	-
13 (Table No.- 7)(Flaring Test)	-	0	-
14(Flattaning Test-IS 2328)	-	0	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	0	-
17(Leak Tighteness Test)	-	0	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	0	-
19(Eddy current test & Air under water)	-	0	-
21(Workmanship, Finish and Appearance)	-	0	-
22(Repair by Welding or Grinding)	-	0	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flaring Test)	-	0	-
Clause 14(Flattening Test)	-	0	-
Clause 15(Grain Size)	-	0	-
Clause 17(Leak Tightness Test)	-	0	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 21(Workmanship, Finish & Appearance)	-	0	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
10.2(Hardness test IS 1500 (part-1):2019)	-	0	-
12.2(Flaring test IS 17878:2022)	-	0	-
16(Sampling)	-	0	-
24(Marking)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	0	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	0	-
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	0	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	0	-
11(Transverse Tension Test,%)	-	0	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	0	-
13 (Table No.- 7)(Flaring Test)	-	0	-
14(Flattaning Test-IS 2328)	-	0	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	0	-
17(Leak Tighteness Test)	-	0	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	0	-
19(Eddy current test & Air under water)	-	0	-
21(Workmanship, Finish and Appearance)	-	0	-
22(Repair by Welding or Grinding)	-	0	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flaring Test)	-	0	-
Clause 14(Flattening Test)	-	0	-
Clause 15(Grain Size)	-	0	-
Clause 17(Leak Tightness Test)	-	0	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 21(Workmanship, Finish & Appearance)	-	0	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
10.2(Hardness test IS 1500 (part-1):2019)	-	0	-
12.2(Flaring test IS 17878:2022)	-	0	-
16(Sampling)	-	0	-
24(Marking)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	0	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	0	-

-
Included w.e.f.11.07.2025

104

IS 4992 (2024)

Door Handles for Mortice Locks â Specification (Second Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Fastening Elements and Spindle)	-	1000	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	4000	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	4000	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	5000	-
Cl-6.3(Safety Requirements)	-	1000	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	4000	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	4000	-
Cl-6.5(Corrosion Resistance)	-	1000	-
Cl-6.6(Fire Resistance Test)	-	5000	-
Cl-8(Marking)	-	1000	-

-
Included w.e.f.13.05.2025

105

IS 4992 (1975)

Specification for door handles for mortice locks (Vertical Type) (First Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1(Finish - Brass door handles shall have natural finish or shall be bright electro chromium plated. Aluminium alloy door handles shall be anodized )	-	3000	-
Cl. 8.1 (Ref. Cl.9 of IS 1868:1996)(Finish - Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	3000	-
4.1(MANUFACTURE AND CONSTRUCTION)	-	1000	-
4.2(MANUFACTURE AND CONSTRUCTION)	-	1000	-
5(DIMENSIONS AND TOLERANCES)	-	1000	-
6.1(Performance Requirments)	-	5000	-
6.2(Performance Requirments)	-	5000	-
7(WORKMANSHIP)	-	1000	-
7(WORKMANSHIP)	-	1000	-
8(FINISH)	-	500	-
8(FINISH)	-	500	-
8(FINISH)	-	500	-

-
Included w.e.f.19.05.2025

106

IS 208 (2020)

Door Handles - Specification ( Sixth Revision )

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(PACKING)	-	200	-
9.1(BIS Certification Marking)	-	200	-
9(MARKING)	-	200	-
6.2(Tolerance)	-	500	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	500	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	500	-
5.1(MANUFACTURE- General)	-	300	-
3(TYPES-Doors handle shall be of the following types according to the materials used:)	-	200	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	300	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	300	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	300	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	300	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	300	-
Cl.5.1(General)	-	300	-
Cl.6(Dimension)	-	500	-
Cl.7(Finish)	-	300	-
Cl.8.2(Cossosion Test)	-	500	-
Cl.8.3(Quench Test)	-	1000	-
Cl.9(Sampling and criterion for conformity)	-	200	-
Cl.10(Marking)	-	200	-
Cl.11(Packing)	-	200	-
Cl.8.3 (Amendment 1)(Anodizing Test)	-	500	-
10(PACKING)	-	0	-
9.1(BIS Certification Marking)	-	0	-
9(MARKING)	-	0	-
6.2(Tolerance)	-	0	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-	0	-
6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-	0	-
5.1(MANUFACTURE- General)	-	0	-
3(TYPES-Doors handle shall be of the following types according to the materials used:)	-	0	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	0	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	0	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	0	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	0	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	0	-
Cl.5.1(General)	-	0	-
Cl.6(Dimension)	-	0	-
Cl.7(Finish)	-	0	-
Cl.8.2(Cossosion Test)	-	0	-
Cl.8.3(Quench Test)	-	0	-
Cl.9(Sampling and criterion for conformity)	-	0	-
Cl.10(Marking)	-	0	-
Cl.11(Packing)	-	0	-
Cl.8.3 (Amendment 1)(Anodizing Test)	-	0	-

-
Included w.e.f.19.05.2025

107

IS 1019 (1974)

Specification for rim latches (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1 -i(mild steel)	-	1000	-
5.1 table 1 -ii(galvenised mild steel wire ( for rivets ))	-	1000	-
5.1 table 1 -iii(cast brass)	-	1000	-
5.1 table 1 -iv(brass sheet)	-	1000	-
5.1 table 1 -v(Phosphor bronze wire)	-	1000	-
5.1 table 1 -vi(steel wire for spring)	-	1000	-
5.1 table 1 -vii(leaded tin bronze)	-	1000	-
5.1 table 1-viii(aluminium alloy pressure die casting)	-	1000	-
5.1 table 1 -ix(aluminium alloy sheets)	-	1000	-
5.1 table 1 -x(Cast brass)	-	300	-
8.2.1(body)	-	300	-
8.2.2(Back Plate)	-	300	-
8.2.3(latch Bolt)	-	300	-
8.2.4(Follower)	-	300	-
8.2.5(spring)	-	300	-
8.2.6(LockingPin -)	-	300	-
8.2.7(Spindle)	-	300	-
8.2.8(Knob)	-	300	-
8.29(disc)	-	300	-
8.2.10(striking box)	-	300	-
9.2()	-	300	-
Cl. 10(PERFORMANCE REQUIREMENTS)	-	300	-
2-2.1(HANDING OF RIM LATeRES)	-	300	-
5.1 table 1 -i(mild steel)	-	0	-
5.1 table 1 -ii(galvenised mild steel wire ( for rivets ))	-	0	-
5.1 table 1 -iii(cast brass)	-	0	-
5.1 table 1 -iv(brass sheet)	-	0	-
5.1 table 1 -v(Phosphor bronze wire)	-	0	-
5.1 table 1 -vi(steel wire for spring)	-	0	-
5.1 table 1 -vii(leaded tin bronze)	-	0	-
5.1 table 1-viii(aluminium alloy pressure die casting)	-	0	-
5.1 table 1 -ix(aluminium alloy sheets)	-	0	-
5.1 table 1 -x(Cast brass)	-	0	-
8.2.1(body)	-	0	-
8.2.2(Back Plate)	-	0	-
8.2.3(latch Bolt)	-	0	-
8.2.4(Follower)	-	0	-
8.2.5(spring)	-	0	-
8.2.6(LockingPin -)	-	0	-
8.2.7(Spindle)	-	0	-
8.2.8(Knob)	-	0	-
8.29(disc)	-	0	-
8.2.10(striking box)	-	0	-
9.2()	-	0	-
Cl. 10(PERFORMANCE REQUIREMENTS)	-	0	-
2-2.1(HANDING OF RIM LATeRES)	-	0	-

-
Included w.e.f.19.05.2025

108

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

POTABLE WATER BOTTLES

29900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1(Materials)	-	0	-
7.1.1(copper bottle - copper)	-	250	-
7.1.1(copper bottle – lead)	-	1000	-
7.1.1(copper bottle – bismuth)	-	1000	-
7.1.1(copper bottle – oxygen)	-	250	-
7.1.1(copper bottle – total impurities)	-	500	-
7.1.3.3(o-ring or washer - Defects)	-	250	-
7.1.4(Auxillary closure- Bisphenol A (BPA))	-	1000	-
7.1.8(Anodic coating)	-	500	-
7.1.8(Hard Anodized)	-	500	-
7.1.9(External coating– Limit of Lead)	-	750	-
7.1.9(External coating– Limit of Cadmium)	-	750	-
7.2(Capacity)	-	250	-
7.3, 7.3.1, 7.3.2(Impact resistance Test/ Drop Impact Test/ Pendulum Impact test)	-	500	-
7.4(Test for strength of shoulder strap)	-	500	-
7.5(Test for cord)	-	500	-
7.7(Leakage test)	-	500	-
7.8(Staining test)	-	500	-
7.9(Lever, device for operating or Regulating flow test)	-	500	-
7.10(Stability test)	-	500	-
7.11(Load test)	-	500	-
7.12(Food safe test/Leaching test)	-	500	-
7.12(Water potability)	-	250	-
7.13(Turbidity)	-	250	-
7.13(pH value)	-	250	-
7.13(Taste threshold)	-	250	-
7.13(Colour, Hazen units)	-	250	-
7.13(Odour)	-	250	-
7.13(Total dissolved solids)	-	250	-
9.1(Marking)	-	250	-

-
-

109

IS 7454 (2024)

Rehabilitation Equipment â Wheelchairs, Folding, Adult Size â Specification (Second Revision)

Wheelchairs, Folding, Adult Size

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(SHAPE AND DIMENSIONS)	-	500	-
Cl-6(Materials)	-	10000	-
Cl-7.1(Backrest and Seat)	-	500	-
Cl-7.2(Frame)	-	500	-
Cl-7.3(Footrests and Supports)	-	200	-
Cl-7.4(Armrests)	-	1000	-
Cl-7.5(Hand Rims)	-	1000	-
Cl-7.6(Brakes)	-	1000	-
Cl-7.7(Castors)	-	1000	-
Cl-7.8(Wheels)	-	1000	-
Cl-7.9(Clothing Guards)	-	4000	-
Cl-7.10(Folding Mechanism)	-	3000	-
Cl-7.11(Lubrication)	-	1000	-
Cl-8(Finish)	-	500	-
Cl-9.1(Test for Wheeling)	-	500	-
Cl-9.2(Hazard Running Test)	-	8000	-
Cl-9.3(Load Test)	-	5000	-
Cl-9.4(Test for Folding)	-	3000	-
Cl-9.5(Stability Test)	-	3000	-
Cl-11(Marking)	-	300	-
Cl-5(SHAPE AND DIMENSIONS)	-	0	-
Cl-6(Materials)	-	0	-
Cl-7.1(Backrest and Seat)	-	0	-
Cl-7.2(Frame)	-	0	-
Cl-7.3(Footrests and Supports)	-	0	-
Cl-7.4(Armrests)	-	0	-
Cl-7.5(Hand Rims)	-	0	-
Cl-7.6(Brakes)	-	0	-
Cl-7.7(Castors)	-	0	-
Cl-7.8(Wheels)	-	0	-
Cl-7.9(Clothing Guards)	-	0	-
Cl-7.10(Folding Mechanism)	-	0	-
Cl-7.11(Lubrication)	-	0	-
Cl-8(Finish)	-	0	-
Cl-9.1(Test for Wheeling)	-	0	-
Cl-9.2(Hazard Running Test)	-	0	-
Cl-9.3(Load Test)	-	0	-
Cl-9.4(Test for Folding)	-	0	-
Cl-9.5(Stability Test)	-	0	-
Cl-11(Marking)	-	0	-

-
Included w.e.f.19.05.2025

110

IS 1361 (1978)

Specification for Steel Windows for Industrial Buildings

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.3(HANDING)	-	1000	-
Cl. No.4(DESIGNATION)	-	1000	-
Cl. No.5(STANDARD SIZES AND TOLERANCES)	-	2000	-
Cl. No.6(MATERIAL)	-	10000	-
Cl. No.7(CONSTRUCTION)	-	1000	-
Cl. No.8(HOLES FOR FIXING, COUPLING AND GLAZING)	-	1000	-
Cl. No.9(FITTINGS AND FIXING MATERIALS)	-	1000	-
Cl. No.10(COMPOSITE WINDOWS)	-	1000	-
Cl. No.11, Table no. 1(GLASS)	-	4000	-
Cl. No.12(FINISH)	-	1000	-
Cl. No.3(HANDING)	-	1000	-
Cl. No.4(DESIGNATION)	-	0	-
Cl. No.5(STANDARD SIZES AND TOLERANCES)	-	0	-
Cl. No.6(MATERIAL)	-	0	-
Cl. No.7(CONSTRUCTION)	-	0	-
Cl. No.8(HOLES FOR FIXING, COUPLING AND GLAZING)	-	0	-
Cl. No.9(FITTINGS AND FIXING MATERIALS)	-	0	-
Cl. No.10(COMPOSITE WINDOWS)	-	0	-
Cl. No.11, Table no. 1(GLASS)	-	0	-
Cl. No.12(FINISH)	-	0	-
Cl. No.3(HANDING)	-	0	-
Cl. No.4(DESIGNATION)	-	0	-
Cl. No.5(STANDARD SIZES AND TOLERANCES)	-	0	-
Cl. No.6(MATERIAL)	-	0	-
Cl. No.7(CONSTRUCTION)	-	0	-
Cl. No.8(HOLES FOR FIXING, COUPLING AND GLAZING)	-	0	-
Cl. No.9(FITTINGS AND FIXING MATERIALS)	-	0	-
Cl. No.10(COMPOSITE WINDOWS)	-	0	-
Cl. No.11, Table no. 1(GLASS)	-	0	-
Cl. No.12(FINISH)	-	0	-

-
Included w.e.f.19.05.2025

111

IS 17296 (2020)

Stainless Steel Door Stoppers ” Specification

Stainless Steel Door Stoppers

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3,a(Single rod door stoppers)	-	1000	-
Clause 3,b(Double rod door stoppers)	-	2000	-
Clause 3,c(Long square rod door stoppers)	-	2000	-
Clause 4.1.1(Base Plate)	-	7500	-
Clause 4.1.2(Rod)	-	7500	-
Clause 4.1.3(Rubber)	-	2000	-
Clause 5(Sizes)	-	2000	-
Clause 7(Finish)	-	1000	-
Clause 8(Sampling and criteria for conformity)	-	0	-
Clause 9(Marking)	-	1000	-
Clause 10(Packing)	-	1000	-
Clause 3,a(Single rod door stoppers)	-	0	-
Clause 3,b(Double rod door stoppers)	-	0	-
Clause 3,c(Long square rod door stoppers)	-	0	-
Clause 4.1.1(Base Plate)	-	0	-
Clause 4.1.2(Rod)	-	0	-
Clause 4.1.3(Rubber)	-	0	-
Clause 5(Sizes)	-	0	-
Clause 7(Finish)	-	0	-
Clause 8(Sampling and criteria for conformity)	-	0	-
Clause 9(Marking)	-	0	-
Clause 10(Packing)	-	0	-

-
Included w.e.f.19.05.2025

112

IS 17573 (2021)

BWP GRADE BAMBOO MAT BOARD SPECIFICATION

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Bamboo)	-	1000	-
4.2(Adhesive)	-	2000	-
5.1(Bamboo Mats)	-	1000	-
5.1.1(Prophylactic Treatment)	-	1500	-
5.2(Application of Adhesive)	-	0	-
5.3(Conditioning of Adhesive Coated Bamboo Mats)	-	1000	-
5.4(Assembly)	-	0	-
5.5(Hot Pressing)	-	1000	-
5.6(Preservative Treatment)	-	1500	-
5.7(Moisture Content)	-	1000	-
6.2(Thickness)	-	300	-
6.3 Table - 1 (i)(Length)	-	300	-
6.3 Table - 1 (ii)(Width)	-	300	-
6.3 Table - 1 (iii)(Thickness)	-	300	-
6.3 Table - 1 (iv)(Edge straightness)	-	300	-
6.3 Table - 1 (v)(Squareness)	-	300	-
7(Workmanship and Finish)	-	1000	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	1000	-
8.1 Table - 2 (ii)(Moisture content, percent)	-	1000	-
8.1 Table - 2 (iii)(Internal bond strength in dry state, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (iv)(Internal bond strength in wet state, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (v)(Modulus of rupture, N/mm2 , Min)	-	500	-
8.1 Table - 2 (vi)(Modulus of elasticity, N/mm2 , Min)	-	500	-
8.1 Table - 2 (vii)(Tensile strength, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (viii)(Compressive strength, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	1000	-
8.1 Table - 2 (x) (a)(Flammability)	-	1000	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	1000	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	1500	-
8.2(Flammability, Flame Penetration and Rate of Burning)	-	1500	-
11(Marking)	-	1000	-
6.1(Dimensions)	-	0	-

-
Included w.e.f.19.05.2025

113

IS 17571 (2021)

Flattened Bamboo Board - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Bamboo)	-	2000	-
4.2(Veneer)	-	2000	-
4.3(Adhesive)	-	1000	-
5.1(Flattened Bamboo)	-	1000	-
5.2(Preservative Treatment)	-	1000	-
5.3(Application of Adhesive)	-	1000	-
5.4(Conditioning of Adhesive Coated Flattened Bamboos)	-	500	-
5.5(Assembly)	-	1000	-
5.6(Hot Pressing)	-	1000	-
5.7(Moisture Content)	-	1000	-
6.1(Dimensions)	-	1000	-
6.2(Thickness)	-	1000	-
6.3 Table - 1 (i)(Length)	-	1000	-
6.3 Table - 1 (ii)(Width)	-	1000	-
6.3 Table - 1 (iii)(Thickness)	-	1000	-
6.3 Table - 1 (iv)(Edge straightness)	-	1000	-
6.3 Table - 1 (v)(Squareness)	-	1000	-
7(Workmanship and Finish)	-	1000	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	1000	-
8.1 Table - 2 (ii)(Moisture content)	-	1000	-
8.1 Table - 2 (iii)(Internal bond strength in dry state)	-	1000	-
8.1 Table - 2 (iv)(Internal bond strength in wet state)	-	1000	-
8.1 Table - 2 (v)(Modulus of rupture)	-	1000	-
8.1 Table - 2 (vi)(Modulus of elasticity)	-	2000	-
8.1 Table - 2 (vii)(Tensile strength)	-	1000	-
8.1 Table - 2 (viii)(Compressive strengt)	-	2000	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	1000	-
8.1 Table - 2 (x) (a)(Flammability)	-	2000	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	2000	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	2000	-
11(Marking)	-	1000	-
4.1(Bamboo)	-	0	-
4.2(Veneer)	-	0	-
4.3(Adhesive)	-	0	-
5.1(Flattened Bamboo)	-	0	-
5.2(Preservative Treatment)	-	0	-
5.3(Application of Adhesive)	-	0	-
5.4(Conditioning of Adhesive Coated Flattened Bamboos)	-	0	-
5.5(Assembly)	-	0	-
5.6(Hot Pressing)	-	0	-
5.7(Moisture Content)	-	0	-
6.1(Dimensions)	-	0	-
6.2(Thickness)	-	0	-
6.3 Table - 1 (i)(Length)	-	0	-
6.3 Table - 1 (ii)(Width)	-	0	-
6.3 Table - 1 (iii)(Thickness)	-	0	-
6.3 Table - 1 (iv)(Edge straightness)	-	0	-
6.3 Table - 1 (v)(Squareness)	-	0	-
7(Workmanship and Finish)	-	0	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	0	-
8.1 Table - 2 (ii)(Moisture content)	-	0	-
8.1 Table - 2 (iii)(Internal bond strength in dry state)	-	0	-
8.1 Table - 2 (iv)(Internal bond strength in wet state)	-	0	-
8.1 Table - 2 (v)(Modulus of rupture)	-	0	-
8.1 Table - 2 (vi)(Modulus of elasticity)	-	0	-
8.1 Table - 2 (vii)(Tensile strength)	-	0	-
8.1 Table - 2 (viii)(Compressive strengt)	-	0	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	0	-
8.1 Table - 2 (x) (a)(Flammability)	-	0	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	0	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	0	-
11(Marking)	-	0	-

-
Included.w.e.f.19.05.2025

114

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	800	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	800	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	800	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	800	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	800	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	800	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	800	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	800	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	800	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	800	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	800	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	800	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	800	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	800	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	800	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	800	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	800	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	800	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	800	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	800	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	800	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	800	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	800	-
7(Finish)	-	200	-
8.3(Dimensional Tolerances)	-	500	-
9.2, 11.4(Moisture content)	-	1000	-
11.10(screw withdrawal strength)	-	800	-
Cl-9.6(Workability)	-	800	-
Cl-9.7 (Amendment No-5)(Formaldehyde Content/Emission, Fc)	-	800	-
Cl-9.7.2 (Amendment No-5)(Steady State Formaldehyde Emission Value)	-	800	-
Cl-12 (Amendment No 1)(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	200	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
7(Finish)	-	0	-
8.3(Dimensional Tolerances)	-	0	-
9.2, 11.4(Moisture content)	-	0	-
11.10(screw withdrawal strength)	-	0	-
Cl-9.6(Workability)	-	0	-
Cl-9.7 (Amendment No-5)(Formaldehyde Content/Emission, Fc)	-	0	-
Cl-9.7.2 (Amendment No-5)(Steady State Formaldehyde Emission Value)	-	0	-
Cl-12 (Amendment No 1)(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

-
Included w.e.f.19.05.2025

115

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

Medium density fibre boards for general purpose

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	500	-
Clauses 5.2, 9 and 10.2.2(Density)	-	500	-
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	500	-
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	500	-
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	500	-
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	500	-
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	500	-
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	500	-
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	500	-
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	500	-
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	500	-
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	1000	-
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	500	-
8(DIMENSIONS AND TOLERANCES)	-	500	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1000	-
Cl 7(Finish)	-	300	-
Clauses 5.2, 9 and 10.2.2(Density)	-	0	-
Clauses 5.2, 9 and 10.2.2(Density)	-	0	-
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	0	-
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	0	-
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	0	-
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	0	-
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	0	-
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	0	-
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	0	-
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	0	-
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	0	-
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	0	-
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	0	-
8(DIMENSIONS AND TOLERANCES)	-	0	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
Cl 7(Finish)	-	0	-

-
Included w.e.f. 19.05.2025

116

IS 16171 (2014)

Veneer laminated lumber - Specification

Veneer Laminated Lumber

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Timber)	-	1000	-
4.2(Veneers)	-	1000	-
4.3(Adhesive)	-	1000	-
4.4(Preservatives)	-	1000	-
5(Manufacture)	-	0	-
6(Dimensions)	-	1000	-
7(Finish)	-	1000	-
8(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
9.1(Moisture Content)	-	1000	-
9.2(Density)	-	1000	-
9.3(Resistance to Water)	-	1000	-
9.3.1(Adhesion of Plies)	-	1000	-
9.4(Modulus of Elasticity)	-	1000	-
9.5(Hardness Under Static Indentation)	-	1500	-
9.6(Screw Withdrawal Strength)	-	1500	-
11(Marking)	-	500	-
4.1(Timber)	-	0	-
4.2(Veneers)	-	0	-
4.3(Adhesive)	-	0	-
4.4(Preservatives)	-	0	-
5(Manufacture)	-	0	-
6(Dimensions)	-	0	-
7(Finish)	-	0	-
8(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
9.1(Moisture Content)	-	0	-
9.2(Density)	-	0	-
9.3(Resistance to Water)	-	0	-
9.3.1(Adhesion of Plies)	-	0	-
9.4(Modulus of Elasticity)	-	0	-
9.5(Hardness Under Static Indentation)	-	0	-
9.6(Screw Withdrawal Strength)	-	0	-
11(Marking)	-	0	-

-
Included w.e.f.19.05.2025

117

IS 14616 (1999)

Laminated veneer lumber specification

Laminated veneer lumber

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Dimensions)	-	500	-
6.2(Dimensions)	-	500	-
7(workmanship and finish)	-	200	-
8.2.1(moisture content)	-	500	-
8.2.2(adhesion of plies)	-	500	-
8.2.3, 8.2.4, Table-1(modulus of rupture)	-	1200	-
8.2.3, 8.2.4, Table-1(modulus of elasticity)	-	1200	-
8.2.3, 8.2.4, Table-1(compressive strength parallel to grain)	-	1200	-
8.2.3, 8.2.4, Table-1(horizontal shear a)-parallel to grain ,b)-perpendicular to grain)	-	1200	-
8.2.3, 8.2.4, Table-1(tensile strength parallel to grain )	-	1200	-
8.2.3, 8.2.4, Table-1(screw holding power a)-parallel to grain ,b)-perpendicular to grain)	-	1200	-
8.2.3, 8.2.4, Table-1(thickness swelling in 2 hrs. water soaking)	-	1200	-
8.2.4(swelling in wear)	-	1000	-
Clause 8.2.1(Moisture content)	-	500	-

-
Included w.e.f.19.05.2025

118

IS 10701 (2012)

Structural plywood - Specification (First Revision)

Specification for Structural Plywood

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Glue Shear strength in dry state)	-	1000	-
11.4.1(Resistance to Water)	-	1000	-
11.4.2(Resistance to Water)	-	0	-
11.5(Resistance to Micro-organisms)	-	3500	-
11.6(Tensile Strength)	-	1500	-
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	1500	-
11.8(Wet Bending Strength)	-	2000	-
Clause 11.2(Moisture content)	-	500	-
Cl-8(Dimension and tolerances)	-	500	-
Cl-9(Workmanship and finish)	-	500	-
Cl-7.1(Veneers)	-	2500	-
Cl-7.2(Construction)	-	500	-
Cl-11.9(Retention of preservatives)	-	5000	-
Cl-4(Material)	-	500	-
Cl-5(Plywood)	-	2500	-
Clause. 7.3(Consruction Inclination)	-	2000	-
Clause. 7.4(Moisture content)	-	500	-

-
Included w.e.f.19.05.2025

119

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

Fire Retardant Plywood

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	0	-
4.1(Flame retardant chemicals)	-	0	-
4.2(Flame retardant and preservative treatment)	-	0	-
4.3(Treatment)	-	0	-
5(PREPARATION FOR TREATMENT)	-	0	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	0	-
6.1.2(Soaking Treatment)	-	0	-
6.2(Choice of Treatment)	-	0	-
7(CONDITIONING AFTER TREATMENT)	-	0	-
8.1(Dimensions)	-	500	-
8.2(Thickness)	-	0	-
8.3, Taable-1 (i)(Tolerance- Length)	-	500	-
9(WORKMANSHIP AND FINISH)	-	500	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	100	-
11 (a)(For flammability)	-	600	-
11 (b)(For flame penetration)	-	600	-
11 (c)(For rate of burning)	-	600	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	1800	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	2500	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	3000	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	3000	-
12.2(Other Tests)	-	0	-
14(Marking)	-	200	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
8.3 (Table 1)(b) 6 mm and above)	-	0	-
4.1(Flame retardant chemicals)	-	0	-
4.2(Flame retardant and preservative treatment)	-	0	-
4.3(Treatment)	-	0	-
5(PREPARATION FOR TREATMENT)	-	0	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	0	-
6.1.2(Soaking Treatment)	-	0	-
6.2(Choice of Treatment)	-	0	-
7(CONDITIONING AFTER TREATMENT)	-	0	-
8.1(Dimensions)	-	0	-
8.2(Thickness)	-	0	-
8.3, Taable-1 (i)(Tolerance- Length)	-	0	-
9(WORKMANSHIP AND FINISH)	-	0	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
11 (a)(For flammability)	-	0	-
11 (b)(For flame penetration)	-	0	-
11 (c)(For rate of burning)	-	0	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	0	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	0	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	0	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	0	-
12.2(Other Tests)	-	0	-
14(Marking)	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

-
Included w.e.f.19.05.2025

120

IS 1503 (2023)

Wooden Packing Cases - Specification (Fourth Revision)

Wooden Packing Cases

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	1000	-
Cl-4.2.1(Laminated veneer lumber)	-	2000	-
Cl-4.2.1(Veneer laminated lumber)	-	0	-
Cl-4.3(Nails)	-	2000	-
Cl-5.1, Table-1 (i)(Thickness of bottom, top and side boards)	-	1000	-
Cl-5.1, Table-1 (ii)(Thickness of end boards)	-	0	-
Cl-5.1, Table-1 (iii)(Thickness of battens)	-	0	-
Cl-5.1, Table-1 (iv)(Width of battens)	-	0	-
Cl-5.2(Styles)	-	1000	-
Cl-5.3(Sizes)	-	1000	-
Cl-7(MANUFACTURE)	-	500	-
Cl-8(WORKMANSHIP AND FINISH)	-	500	-
Cl-9(PRESERVATIVE TREATMENT)	-	1000	-
Cl-12(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1000	-
Cl-13(Marking)	-	500	-

-
Included w.e.f.19.05.2025

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt. Ltd. 1668 Sonipat

1668 (DIV-II), HSIIDC INDUSTRIAL ESTATE, RAI, DIST. SONEPAT, HARYANA, INDIA, Sonipat, Sonipat, Haryana, 131029

9310314585 bthdiv2@bharattesthouse.com

Scope List