BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

990 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15354 : Part 1 (2023)

Single-use medical examination gloves Part 1 Specification for gloves made from rubber latex or rubber solution Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.3 (Finish)	-
Cl-5 (Materials)	-
Cl-7.1, Table-2 (Size code)	-
Cl-7.1, Table-2 (Width corresponding to size code (dimension w, Figure 1))	-
Cl-7.1, Table-2 (Descriptive size)	-
Cl-7.1, Table-2 (Width corresponding to descriptive size (dimension w, Figure 1))	-
Cl-7.1, Table-2 (Minimum length (dimension l, Figure 1))	-
Cl-7.1, Table-2 (Minimum thickness (at locations shown in Figure 1))	-
Cl-7.1, Table-2 (Maximum thickness (at approximate centre of palm))	-
Cl-7.2 (Water tightness)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum force at break before accelerated ageing, N)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum elongation at break before accelerated ageing, %)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum force at break after accelerated ageing, N)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum elongation at break after accelerated ageing, %)	-
Cl-7.4 (Sterility)	-
Cl-9 (Marking)	-

-
Partial

IS 5290 (2025)

Landing Valves - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (MATERIAL OF CONSTRUCTION)	-

-
-

IS 903 (2025)

Fire Hose Delivery Couplings, Branch Pipe, Nozzles and Nozzle Spanner - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Clause 5.2, 6.2, 7.2, 10.2 (Dimensions & Tolerances)	-

-
-

IS 12492 (2025)

Thermoplastics Hoses (Textile Reinforced) for Compressed Air â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6 (Materials and construction)	-
Cl-7.1, Table-1 (Inside diameter)	-
Cl-7.1, Table-1 (Tolerance)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type A)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type B)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type C)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type D)	-
Cl-7.2 (Concentricity)	-
Cl-7.3 (Tolerances on length)	-
Cl-8.1.1 (Tensile strength and elongation at break of lining and cover)	-
Cl-8.1.2 (Resistance to ageing)	-
Cl-8.1.3 (Loss in mass on heating)	-
Cl-8.2.1 (Hydrostatic requirements)	-

-
Excluding Resistance to Liquids, Performance Test- Cold bend radius

IS 573 (2023)

TRISODIUM PHOSPHATE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2, Table-1 (i) (Matter insoluble in water, percent by mass, Max)	-
Cl-5.2, Table-1 (ii) (Phosphates (P2O5), percent by mass, Min)	-
Cl-5.2, Table-1 (iii) (Carbonates (Na2CO3), percent by mass, Max)	-
Cl-5.2, Table-1 (iv) (Carbonate alkalinity (NaOH), percent by mass, Max)	-
Cl-5.2, Table-1 (v) (Free sodium hydroxide (NaOH), percent by mass Max)	-
Cl-5.2, Table-1 (vi) (Total alkalinity (NaOH), percent by mass, Max)	-
Cl-5.2, Table-1 (viii) (Nitrogen compounds (N), percent by mass, Max)	-
Cl-5.2, Table-1 (ix) (Sulphates (SO4), percent by mass, Max)	-
Cl-5.2, Table-1 (x) (Arsenic (As2O3), percent by mass, Max)	-
Cl-5.2, Table-1 (xi) (Heavy metals (Pb), percent by mass, Max)	-
Cl-5.2, Table-1 (xiii) (Chloride (Cl), percent by pass, Max)	-

-
-

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10 (MECHANICAL PROPERTIES)	-
Cl.9.1 (Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Copper- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Iron- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-

-
-

IS 10709 (1983)

Specification for brass wires for fourdrinier cloth

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
NA

IS 8877 (2023)

Acetoacetic methyl ester - Specification (Third Revision)

Rs. 4,060/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Description)	-
Cl-3.2, Table-1 (i) (Assay, percent by mass, Min)	-
Cl-3.2, Table-1 (ii) (Acidity (as CH3COOH), percent by mass, Max)	-
Cl-3.2, Table-1 (iii) (Moisture content, percent by mass, Max)	-

-
-

IS 12640 : Part 1 (2024)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses Rccbs: Part 1 general rules (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Marking)	-
8.1.1 (General)	-
8.1.2 (Mechanism)	-
8.1.3 (Clearance and creepage distance (External parts only))	-
8.1.3 (Clearance and creepage distance (Internal parts only))	-
9.15 (Trip free mechanism)	-
9.4 (Reliability of screws, current-carrying parts and connections)	-
9.5 (Reliability of terminals for external conductors)	-
9.6 (Protection againts electrci shock)	-
9.13 (Resistance to heat)	-
9.7.1 (Resistance to humidity)	-
9.7.2 (Insulation resistance of the main circuit)	-
9.7.3 (Dielectric strength of the main circuit)	-
9.8 (Temperature-rise)	-
9.14 (Resistance to abnormal heat and to fire)	-
9.25 (Resistance to rusting)	-

-
Testing facility not available for 1. Trip free mechanism, 2. Resistance of insulation against impulse voltage, 3. Reliability at 40 °C 4. Aging of electric components, 5. Mechanical and electrical endurance 6. Test sequence D 7. Test sequence E 8. Test sequence F, 9. Test sequence G, 10. Verification of the suitability of RCCB for use in IT system

IS 2692 (1989)

Ferrules for water services ? specification

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Nominal Size )	-

-
-

IS 3521 : Part 4 (2021)

Personal Fall Arrest Systems Specification Part 4 Vertical rails and vertical lifelines incorporating a sliding-type fall arrester

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (general requirement)	-
4.2 (Requirements for vertical rails)	-
4.3 (" Requirements for permanent vertical lifelines ")	-
4.4 (" Requirements for temporary vertical lifelines ")	-
4.5.1 ("Fibre ropes and webbing ")	-
4.5.2 (" Wire ropes ")	-
4.5.3 (Terminations)	-
4.6 (Verticle life energy absorber)	-
4.7 (Sliding type fall Arrester Requirement)	-
4.8 (Requirement for connectors)	-
4.9 (Corrosion)	-
4.1 (" Locking performance after conditioning ")	-
4.11 (Locking Reliability)	-
4.12 (Dynamic Performance)	-

-
-

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

Please See Remerk View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Manufacture and Workmanship)	-
5.3 (Manufacture and Workmanship)	-
7.1 (Material)	-
7.1.2 (Thickness)	-
7.1.2.1 (Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-
7.1.2.1 (Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-
7.1.2.8 (Bisphenol A(BPA))	-
7.3 (Capacity)	-
7.4 (Heat Retention Capability)	-
7.5 (Cold Retention Capability)	-
7.6.1 (Drop Impact Test)	-
7.6.2 (Pendulum Impact Test)	-
7.8 (Test for Strength of Shoulder Strap)	-
7.9 (Leakage Test)	-
7.10 (Joint Leak Test)	-
7.11 (Staining Test)	-
7.12 ("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-
7.13.1 (Length of the Shoulder Strap)	-
7.13.2 (Stability of Insulated Container)	-
7.13.3 (Cleaning)	-
7.14 (Seepage Test)	-
9.1 (Marking)	-
CLAUSE 5.2 (Welding Defects)	-
CLAUSE 7.1 (Materials)	-
CLAUSE 7.1.2.2 (Thickness of plastic)	-
"CLAUSE 7.1.2.1 " (Minimum Thickness of Outer Container)	-
"CLAUSE 7.1.2.1 " (Coating Thickness)	-
"CLAUSE 7.1.2.1 " (Salt Water Corrosion Test)	-
CLAUSE 7.1.2.1 (Adhesion Test)	-
CLAUSE 7.1.2.1 (Lead Limit)	-
CLAUSE 7.1.2.1 (Cadmium Limit)	-
CLAUSE 7.1.2.3 (Outer container or lid - thickness)	-

-
-

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (General Requirements)	-
Cl-5 (General Conditions for the tests)	-
Cl-6 (Classification)	-
Cl-7 (Marking)	-
Cl-8 (Safety Requirements)	-
Cl-9 (Endurance fpr motor and base assembly)	-
Cl-10.2 ("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-
Cl-10.3 (Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-
Cl-10.4 (Idli Batter)	-
Cl-10.5 (Operational Tests for Juicers)	-
Cl-11 (Temperature Withstand Test for Bowl)	-
Cl-13 (Strength of Assembly)	-
Cl-14.2, 14.3 Table-2 (i) (Protection against access to live parts)	-
Cl-14.2, Table-2 (ii) (Power input and current)	-
Cl-14.2, 14.3 Table-2 (iii) (Leakage current and electric strength at operating temperature)	-
Cl-14.2, Table-2 (iv) (Moisture resistance)	-
Cl-14.2, Table-2 (v) (Leakage current and electric strength)	-
Cl-14.2, 14.3 Table-2 (vi) (Provision for earthing)	-

-
Exclusions : Cl.19.11, Cl,19.12 EMI/EMC, Cl.24 components (as per IS 302 part 1)

IS 14569 (1999)

Commutators for electrical machines - Specification

Rs 2315/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11 (Electrical Tests)	-
12 (Humidity Test)	-
9 (Marking)	-

-
Exclusion : Spin Test (Cl. 13), Cl.6, Cl.7

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
32 (Radiation, toxicity and similar hazards)	-
Cl. 31 IS 302-2-9 (Resistance To Rusting )	-
Cl. 30 IS 302-2-9 (Resistance To Heat, Fire And Tracking)	-
Cl. 29 IS 302-2-9 (Creepage Distances, Clearances And Distances Through Insulation)	-
Cl. 28 IS 302-2-9 (Screws and Connections)	-
Cl. 27 IS 302-2-9 (Provision For Earthing )	-
26.1 to 26.8 (Terminals for external conductors)	-

-
Exclusions : Cl.19.11, Cl,19.12 EMI/EMC, Cl.24 components, Cl.19.101(For toaster)

IS 2041 (2024)

Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7.1, Table-1 (C)	-
Cl-7.1, Table-1 (Si)	-
Cl-7.1, Table-1 (Mn Max)	-
Cl-7.1, Table-1 (P max)	-
Cl-7.1, Table-1 (S Max)	-
Cl-7.1, Table-1 (Al Max)	-
Cl-7.1, Table-1 (N Max)	-
Cl-7.1, Table-1 (Nb Max)	-
Cl-7.1, Table-1 (V Max)	-
Cl-7.1, Table-1 (Ti Max)	-
Cl-7.1, Table-1 (Nb + V + Ti Max)	-
Cl-7.1, Table-1 (Cr Max)	-
Cl-7.1, Table-1 (Cu Max)	-
Cl-7.1, Table-1 (Mo Max)	-
Cl-7.2, Table-2 (Nickel)	-

-
-

IS 17150 (2019)

Mini domestic water heater for use with piped natural gas (PNG) ? specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
24 (Temperature of the surface in normal use)	-

-
-

IS 17153 (2019)

Domestic gas stoves for use with piped natural gas (PNG) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
25.1 (Temperature of the surface in normal use)	-

-
-

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5 (Thickness)	-

-
-

IS 14787 (2000)

Unplasticized pvc pipes (Ducts) and fittings for underground telecommunications cable installation - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Diameter and wall thickness)	-

-
-

IS 12232 : Part 2 (1995)

Irrigation equipment - Rotating sprinkler: Part 2 test method for uniformity of distribution (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Test of Construction and parts)	-

-
-

IS 12232 : Part 1 (1996)

Irrigation equipment - Rotating sprinkler: Part 1 design and operational requirements (First Revision)

for sprinklers 4935 For durability test 13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Construction and workmanship)	-

-
-

IS 12785 (1994)

Irrigation equipment - Strainer - Type filters - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (MECHANiCAL TESTS)	-

-
-

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2 (Emitter Ends)	-
Cl-5.3 (Materials)	-
Cl-7.1 (Construction and Workmanship)	-
Cl-7.2 (Flow Paths in Emitter)	-
Cl-7.3 (Resistance to Hydrostatic Pressure)	-
Cl-7.4 (Emitter Pull-Out)	-
Cl-7.4.1 (In-Line Emitters)	-
Cl-7.4.2 (On-Line Emitters)	-
Cl-8.1.1 (Uniformity of Emission Rate)	-
Cl-8.1.2 (Emission Rate as Function of Inlet Pressure)	-
Cl-8.1.3 (Determination of Emitter Exponent)	-
Cl-9 (Marking)	-

-
-

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-

-
-

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-

-
-

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-

-
-

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-

-
-

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-

-
-

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

No Record Found