| 601 |
IS 362 (1991) |
Parliament Hinges -specification |
- |
Please see remarks. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 7.1 (Brass parliament hinges shall have either bright or satin finish and shall be suitably protected against discoloration) |
- |
|
|
|
| Cl. 7.2 (Ref. Cl. 11.1 of IS 1868:1996) ( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance) |
- |
|
|
|
| Cl. 7.3 (Mild steel parliament hinges shall be finished bright or electro-galvanized as specified by the purchaser) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-A) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-B) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-C) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-D) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-d) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-E) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-No. of Screw holes) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Holes for screw designation) |
- |
|
|
|
| 6.1 (MANUFACTURE-General) |
- |
|
|
|
| 6.2 (MANUFACTURE-Knuckles) |
- |
|
|
|
| 6.3 (MANUFACTURE-Pins) |
- |
|
|
|
| 6.4 (MANUFACTURE-Screw Holes) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the ends of the flap) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the inner edge) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the ends of the flap) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the inner edge) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes) |
- |
|
|
|
| 7.3 (FINISH) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding "Complete for material; Quality of Sealing (Cl 10), Resistance to Crazing by Deformation (Cl 14)
Fastness to Light Cl 15
Light reflection properties Cl 16
Electrical Breakdown potential (Cl 17)
Continuity of the anodize coating (Cl 18)" |
| 602 |
IS 13997 (2014) |
Drums, large open top - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5, Table 1 (Dimensions-D2) |
- |
|
|
|
| 5, Table 1 (Dimensions-D3) |
- |
|
|
|
| 5, Table 1 (Dimensions-D4) |
- |
|
|
|
| 5, Table 1 (Dimensions-H1) |
- |
|
|
|
| 5, Table 1 (Dimensions-H5) |
- |
|
|
|
| 5, Table 1 (Dimensions-h2) |
- |
|
|
|
| 5, Table 1 (Dimensions-h3) |
- |
|
|
|
| 5, Table 1 (Dimensions-h4) |
- |
|
|
|
| 5, Table 1 (Dimensions-p1) |
- |
|
|
|
| 6.2 (The nominal thickness of steel sheets for body
and ends ) |
- |
|
|
|
| 7.1 ( CONSTRUCTION) |
- |
|
|
|
| 7.1 ( CONSTRUCTION) |
- |
|
|
|
| 7.2 ( CONSTRUCTION) |
- |
|
|
|
| 7.3 ( CONSTRUCTION- Double Seam/Spiral Seam/Triple Seam Construction for Grade A Drums) |
- |
|
|
|
| 7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums) |
- |
|
|
|
| 7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums-Seam rolling layers) |
- |
|
|
|
| 7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums-Seam rolling layers) |
- |
|
|
|
| 7.5 ( CONSTRUCTION) |
- |
|
|
|
| 7.6 ( CONSTRUCTION) |
- |
|
|
|
| 7.7 ( CONSTRUCTION) |
- |
|
|
|
| 7.8 ( CONSTRUCTION) |
- |
|
|
|
| 7.8 ( CONSTRUCTION- crest to trough gap) |
- |
|
|
|
| 7.8 ( CONSTRUCTION- no of corrugations on the body Each side) |
- |
|
|
|
| 7.9 (Closures) |
- |
|
|
|
| 7.10(a) (Closures) |
- |
|
|
|
| 7.10(b) (Closures) |
- |
|
|
|
| 7.10(c) (Closures) |
- |
|
|
|
| 7.10(d) (Closures) |
- |
|
|
|
| 7.11 ( Locking Ring) |
- |
|
|
|
| 8.1 (FINISH
) |
- |
|
|
|
| 8.2 (FINISH
) |
- |
|
|
|
| 9 (leakage test) |
- |
|
|
|
|
- |
-
- |
| 603 |
IS 12664 : Part 1 (2003) |
Artificial limbs - Sach foot for lower extremity prostheses: Part 1 design and dimensions (First Revision) |
- |
Rs.1800.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Type) |
- |
|
|
|
| 5,5.1 (Material for Foot) |
- |
|
|
|
| 5,5.2 (Material for Heel) |
- |
|
|
|
| 6, 7.3,Table1 ( Length of Foot) |
- |
|
|
|
| 6, 7.3,Table1 (Toe Circumference) |
- |
|
|
|
| 6, 7.3,Table1 (Heel Width ( Thread line)) |
- |
|
|
|
| 6, 7.3,Table1 (Heel Height) |
- |
|
|
|
| 6, 7.3,Table1 (Foot Height) |
- |
|
|
|
| 6, 7.3,Table1 (Heel Height) |
- |
|
|
|
| 7,7.1 (SHAPE & DESIGN; Performance Test) |
- |
|
|
|
| 7,7.2 (SHAPE & DESIGN Proper Shape) |
- |
|
|
|
| 7,7.4 (Adoption of Foot) |
- |
|
|
|
| 8,8.1 (Marking) |
- |
|
|
|
|
- |
-
- |
| 604 |
IS 3196 : Part 2 (2006) |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision) |
- |
- View breakup
Rs. 13300/- for 3 Pc. Cylinder,Rs. 9600/- for 2 Pc. Cylinder.
(Excluding Radiographic and Fatigue Test )
Material testing charges as per relevant referred ISs to be levied additionally
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 14 (Water Capacity) |
- |
|
|
|
| 16 (Pneumatic Leakage Test) |
- |
|
|
|
| 17 (Fatigue test: Fatigue testing/Cycle testing) |
- |
|
|
|
| 17.3 (Burst test under Hydraulic pressure) |
- |
|
|
|
| 18 (a)Parent metal Longitudinal specimen) |
- |
|
|
|
| 18 (a)Parent metal Circumferential specimen) |
- |
|
|
|
| 18 (Acceptance tests) |
- |
|
|
|
| 18 (c)Weld Joint test specimen) |
- |
|
|
|
| 18.1.4 (Macro Examination Body ,Bung, Non pressure parts Attachments-Foot ring and Stay Plate) |
- |
|
|
|
| 18.1.5 (Minimum Thickness test) |
- |
|
|
|
| 9 (Valve Connection) |
- |
|
|
|
| 10 (Handle) |
- |
|
|
|
| 10 (Foot ring) |
- |
|
|
|
| 10 (Foot ring) |
- |
|
|
|
| 10 (Foot ring) |
- |
|
|
|
| 10 (Foot ring) |
- |
|
|
|
| 10 (Foot Ring) |
- |
|
|
|
| 10.3 (Bung) |
- |
|
|
|
| 20 (Colour Identification) |
- |
|
|
|
| 14 (Water Capacity) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding "-; HYDROSTATIC STRETCH Test (Cl 17.1)
Fatigue Test (Cl.17.2)
Valves connection (Cl 9.1)
Fitting other than valves (Cl.10) Handle (Cl.10.1)
Bung (Cl 10.3)
13 RADIOGRAPHIC EXAMINATION" |
| 605 |
IS 12585 (1988) |
Specification for thermoplastic hoses (Textile Reinforced) for water - General purpose |
- |
1500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3 (Types) |
- |
|
|
|
| Cl 4.1 (Construction) |
- |
|
|
|
| Cl 4.2 (Dimensions & Tolerances) |
- |
|
|
|
| Cl 4.3.3 (Pressure Requirements) |
- |
|
|
|
| Cl 4.3.4 (Minimum Bend Radius) |
- |
|
|
|
| Cl 4.3.5 (Low Temperature Flexibility) |
- |
|
|
|
|
- |
-
- |
| 606 |
IS 8783 : Part 4 : Sec 3 (1995) |
Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision) |
- |
Rs.8700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.) |
- |
|
|
|
| 6.1 (The winding wire shall carry following information marked on the lable on spool / reel / coil;) |
- |
|
|
|
| 6.2 (BIS Certification Mark) |
- |
|
|
|
| 4 (i) Material) |
- |
|
|
|
| 5 (ii) Diameter [mm] Wire taken from cable:) |
- |
|
|
|
| 5 (d) Resistance test [Ohm/km corrected to 20°c) |
- |
|
|
|
| 5 (iii) Annealing test [Percentage] on Seperate wire:) |
- |
|
|
|
| 4.1, table 1 & 2 (a) Thickness of Polyster (mm)) |
- |
|
|
|
| 4.1, table 1 & 3 (b) Thickness of Polypropylene (mm)) |
- |
|
|
|
| 4.1, table 1 & 4 (c) Total thickness of Insulation(mm)) |
- |
|
|
|
| 4.2 (Application of insulation) |
- |
|
|
|
| 4.3 (Colour of Insuation) |
- |
|
|
|
| 4.4 (Overall diameter (mm)) |
- |
|
|
|
| 4 (High Voltage test [Water Immersion test] 3 KV for 1 Minute) |
- |
|
|
|
| 4 (Before ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (After ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (Variation on elongation at break [Percentage]) |
- |
|
|
|
| 4 (After Shrinkage Cracks found.) |
- |
|
|
|
| 4 (Before ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (Before ageing Elongation at break [Percentage]) |
- |
|
|
|
| 4 (After ageing Tensile strength [N/mm²]) |
- |
|
|
|
| 4 (Variation on tensile strangth [Percentage]) |
- |
|
|
|
| 4 (After ageing Elongation at break [Percentage]) |
- |
|
|
|
| 4 (Hot Deformation test [depth of indentation) [Percentage]) |
- |
|
|
|
| 4 (Heat Shock Test - No cracks found Physical) |
- |
|
|
|
| Table 1, Cl. 4.1, VI (Water Absorbtion Test (Gravimetric)) |
- |
|
|
|
| Cl. 4.1 of IS: 8783 (Pt-2) (Insulation Resistance Test) |
- |
|
|
|
| Cl. 4.1 of IS: 8783 (Pt-2) (Insulation Resistance Test) |
- |
|
|
|
| Cl.4.1 of IS: 8783 (Pt-2):1995 (Physical Test for Insulation after Ageing (on finished wire)) |
- |
|
|
|
|
- |
-
- |
| 607 |
IS 368 (2014) |
Electric immersion water heaters - Specification (Fifth Revision) |
- |
- View breakup
For 1 kW & 1.5 kW: Rs.12150.00
For 2 kW and 3 kW: Rs.13050.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.6 of IS 302-‐2-‐201:2008 (Classification) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.8 of IS 302‐2-201: 2008 (Protection Against Access to Live Parts) |
- |
|
|
|
| Cl.10 of IS 302‐2‐201:2008 (Power Input and Current ) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl. 12 of IS 368:2014 (Operation under overload conditions of appliances with heating elements) |
- |
|
|
|
| Cl.13 of IS 302-2-201: 2008 (Leakage Current & Electric Strength at Operating Temperature) |
- |
|
|
|
| Cl.13 of IS 302-2-201: 2009 (Leakage Current & Electric Strength at Operating Temperature) |
- |
|
|
|
| Cl.15 of IS 302-2-201:2008 (Moisture Resistance ) |
- |
|
|
|
| Cl.15 of IS 302-2-201:2008 (Moisture Resistance ) |
- |
|
|
|
| Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength) |
- |
|
|
|
| Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength) |
- |
|
|
|
| Cl.17 of IS 302‐2-201: 2008 (Overload Protection of Transformers & Associated Circuits) |
- |
|
|
|
| Cl.18 of IS 368:2014 (Endurance) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.20 of IS 302-2-201: 2008 (Stability & Mechanical Hazards) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.26 of IS 302-2-201: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.28 of IS 302-2-201: 2008 (Screws & Connections ) |
- |
|
|
|
| Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation ) |
- |
|
|
|
| Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation ) |
- |
|
|
|
| Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire ) |
- |
|
|
|
| Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire ) |
- |
|
|
|
| Cl.31 of IS 302-2-201:2008 (Resistance of Rusting ) |
- |
|
|
|
| Cl.32 of IS 302-2-201:2008 (Radiation, Toxicity and Similar Hazards) |
- |
|
|
|
|
- |
-
- |
| 608 |
IS 10891 : Part 1 (2001) |
Steel wire ropes for aerial ropeways - Specification: Part 1 haulage ropes (First Revision) |
- |
Rs. 1500/- + testing charges as per referred ISS. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4. Table 1to 6 ( ROPE SIZE AND TOLERANCE) |
- |
|
|
|
| 4 and 5 Table 1 t0 6 (MINIMUM BREAKING FORCE OF WIRE ROPE,KN) |
- |
|
|
|
| 4 and 5 Table 1 t0 6 (APPROXIMATE MASS,KG/100M) |
- |
|
|
|
| 6 (GENERAL REQUIREMENTS IS6594) |
- |
|
|
|
| 6.1.1 ( i)Fibre Core IS 1804.) |
- |
|
|
|
| 6.1.1 ( ii)Steel Core) |
- |
|
|
|
| 6.2 ( Joints IS 6594.) |
- |
|
|
|
| 6.3 (Lay) |
- |
|
|
|
| 7 ( GALVANIZING) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding only C & S tested for dia < 3mm; Cl 5 - Minimum Breaking Force (Only for size from 18 mm to 22 mm) |
| 609 |
IS 302 : Part 2 : Sec 30 (2007) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.6 (Classification) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7 (Marking and Instructions) |
- |
|
|
|
| Cl.7 (Marking and Instructions) |
- |
|
|
|
| Cl.7 (Marking and Instructions) |
- |
|
|
|
| Cl.7.3 (Marking and Instructions) |
- |
|
|
|
| Cl.7.3 (Marking and Instructions) |
- |
|
|
|
| Cl.7.3 (Marking and Instructions) |
- |
|
|
|
| Cl.7.4 (Marking and Instructions) |
- |
|
|
|
| Cl.7.5 (Marking and Instructions) |
- |
|
|
|
| Cl.7.6 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.8 of IS :302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.9 of IS :302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.10 of IS :302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.11 of IS :302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.12.1 & IS:302-1:2009 (Marking and Instructions) |
- |
|
|
|
| Cl.7.13 of IS 302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.14 of IS302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.14 (Marking and Instructions) |
- |
|
|
|
| Cl.7.14 (Marking and Instructions) |
- |
|
|
|
| Cl.7.15 of IS 302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.15 of IS 302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.15 of IS 302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.15 of IS 302-1:2008 (Marking and Instructions) |
- |
|
|
|
| Cl.7.101 (Marking and Instructions) |
- |
|
|
|
| Cl.8 & IS:302-1:2008 (Protection Against Access to Live Parts) |
- |
|
|
|
| Cl.10 & IS:302-1:2008 (Power Input and Current) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11 & IS:302-1:2008 (Heating) |
- |
|
|
|
| Cl.11.8 (Heating) |
- |
|
|
|
| Cl.11.8 (Heating) |
- |
|
|
|
| Cl.11.8 (Heating) |
- |
|
|
|
| Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. ) |
- |
|
|
|
| Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. ) |
- |
|
|
|
| Cl.15 & IS: 302-1:2008 (Moisture Resistance
) |
- |
|
|
|
| Cl.15.3 of IS 302-1:200 (Moisture Resistance
) |
- |
|
|
|
| Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength ) |
- |
|
|
|
| Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength ) |
- |
|
|
|
| Cl.18 (Endurance. ) |
- |
|
|
|
| Cl.19 & IS:302-1:2008 (Abnormal Operation.) |
- |
|
|
|
| Cl.19 & IS:302-1:2008 (Abnormal Operation.) |
- |
|
|
|
| Cl.19 & IS:302-1:2008 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.101 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.102 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.103 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.104 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.105 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.106 (Abnormal Operation.) |
- |
|
|
|
| Table 8 of IS 302-1:2008 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.107 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.108 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.109 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.110 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.111 (Abnormal Operation.) |
- |
|
|
|
| Cl.19.114 (Abnormal Operation.) |
- |
|
|
|
| Cl.20 & IS:302-1:2008 (Stability & Mechanical Hazards) |
- |
|
|
|
| Cl.21 & IS:302-1:2008) (Mechanical Strength.) |
- |
|
|
|
| Cl.21.2 of IS 302-1:2008 (Mechanical Strength.) |
- |
|
|
|
| Cl.21.101 (Mechanical Strength.) |
- |
|
|
|
| Cl.21.102 (Mechanical Strength.) |
- |
|
|
|
| Cl.21.103 (Mechanical Strength.) |
- |
|
|
|
| Cl.22.1 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.5 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.6 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.7 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.8 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.9 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.11 (Construction) |
- |
|
|
|
| Cl.22.12 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.13 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.14 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.15 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.18 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.20 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.22.21 of IS 302-1:2008 (Construction) |
- |
|
|
|
| Cl.23 & IS:302-1:2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23.4 & Cl.29 of 302-1:2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23.5 of 302-1:2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23.7 of 302-1:2008 (Internal Wiring
) |
- |
|
|
|
| C.23.7 of 302-1:2008 (Internal Wiring
) |
- |
|
|
|
| Cl.24.1 of 302-1:2008 (Component) |
- |
|
|
|
| Cl.24.1 of 302-1:2008 (Component) |
- |
|
|
|
| Cl.24.1.3 (Component) |
- |
|
|
|
| Cl.24.1.3 (Component) |
- |
|
|
|
| Cl.24.1.3 (Component) |
- |
|
|
|
| C.24.1.4 (Component) |
- |
|
|
|
| C.24.2 of 302-1:2008 (Component) |
- |
|
|
|
| Cl.24.10 (Component) |
- |
|
|
|
| Cl.25.1 of 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl. 25.2 of IS 3021:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl. 25.3 of IS 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl. 25.4 of IS 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.5 of 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.6 of 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.7. (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.8 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl. 25.9 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.10 of 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl. 25.11 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl. 25.12 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl. 25.13 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.14 of IS 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.15 of IS 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.17 of IS 302-1:2008 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.18 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.25.20 (Supply Connection and External Flexible Cords ) |
- |
|
|
|
| Cl.26.1 of IS 302-1:2008 (Terminal for External Conductors
) |
- |
|
|
|
| Cl.26.10 of IS 302-1:2008 (Terminal for External Conductors
) |
- |
|
|
|
| Cl.26.11 of IS 302-1:2008 (Terminal for External Conductors
) |
- |
|
|
|
| Cl.27.1 of 302-1:2008 (Provision for Earthing.) |
- |
|
|
|
| Cl.27.5 of 302-1:2008 (Provision for Earthing.) |
- |
|
|
|
| Cl.28 of 302-1:2008 (Screws and Connections.) |
- |
|
|
|
| Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation) |
- |
|
|
|
| Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation) |
- |
|
|
|
| Cl.30 & IS:302-1:2008 (Resistance to Heat and Fire) |
- |
|
|
|
| Cl.30.2.2 of 302-1:2008 (Resistance to Heat and Fire) |
- |
|
|
|
| Cl.31 & IS:302-1:2008 (Resistance to Rusting.) |
- |
|
|
|
| Cl.32 & IS:302-1:2008 (Radition,Toxicity and similar Hazards.) |
- |
|
|
|
|
- |
-
Excluding electronic circuit type appliances(Cl.19.11 of IS 302 part 1) |
| 610 |
IS 8783 : Part 4 : Sec 1 (1995) |
Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision) |
- |
9300/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.3.1 (Conductor) |
- |
|
|
|
| Cl.4 (Material) |
- |
|
|
|
| Cl.5.1.1 (Dimensions) |
- |
|
|
|
| Cl. 6 (Annealing Test) |
- |
|
|
|
| Cl 6 (Resistance Test) |
- |
|
|
|
| Cl.4.1 (Insulation ) |
- |
|
|
|
| Cl.4.2 (Application) |
- |
|
|
|
| Cl.4.3 (Colour) |
- |
|
|
|
| Cl.4.4 (Overall Diameter) |
- |
|
|
|
| Cl.4.5 (Finish) |
- |
|
|
|
| Cl.4.6 (High Voltage Test Water Immersion ) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength ) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Elongation) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Variation) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break ) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Variation) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test ) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test ) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) ) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test ) |
- |
|
|
|
| Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test ) |
- |
|
|
|
| Cl.3.2 (Dielectric Material ) |
- |
|
|
|
|
- |
-
- |
| 611 |
IS 302 : Part 1 (2008) |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (Marking and instructions) |
- |
|
|
|
| 8.1.1 (Protection against live parts in all positions) |
- |
|
|
|
| 9 (Starting of motor operation test requirements and tests) |
- |
|
|
|
| 10.1 (Power input) |
- |
|
|
|
| 10.2 (Current input) |
- |
|
|
|
| 11.1 (General) |
- |
|
|
|
| 11.2 (General) |
- |
|
|
|
| 11.3 (Heating) |
- |
|
|
|
| 13.1 (General) |
- |
|
|
|
| 13.2 (Leakage current at operating temperature) |
- |
|
|
|
| 13.3 (Electric Strength at operating temperature) |
- |
|
|
|
| 15.1 (Ingress Protection test other than IPX0 (IP test)) |
- |
|
|
|
| 15.2 (Spillage Test) |
- |
|
|
|
| 15.3 (Humidity Test) |
- |
|
|
|
| 16.2 (Leakage Current (after Clause 15)) |
- |
|
|
|
| 16.3 (Electric Strength (after clause 15 and 16.2)) |
- |
|
|
|
| 19 (Abnormal Operation) |
- |
|
|
|
| 20 (Stability test) |
- |
|
|
|
| 21 (Mechanical Strength Test) |
- |
|
|
|
| 22 (Construction verification related test) |
- |
|
|
|
| 23 (General) |
- |
|
|
|
| 24 (Components) |
- |
|
|
|
| 25 (Supply connection and external flexible cords) |
- |
|
|
|
| 26 (Terminals for external conductors) |
- |
|
|
|
| 27 (Provision for earthing) |
- |
|
|
|
| 28 (Screw test and connections) |
- |
|
|
|
| 29 (clearance, creepage distances and solid insulation) |
- |
|
|
|
| 30.1 (Ball pressure test) |
- |
|
|
|
| 30.2 (Glow Wire Test) |
- |
|
|
|
| 31 (Resistance to Rusting) |
- |
|
|
|
| 32 (Radiation Toxicity and Similar Hazards) |
- |
|
|
|
| 6 (Classification- IS 302-1) |
- |
|
|
|
| 17 (Over Load Protection of Transformers and associated circuits) |
- |
|
|
|
| 18 (Endurance Test requirements and tests) |
- |
|
|
|
|
- |
view Scope file
View scope file |
| 612 |
IS 15380 (2003) |
Moulded Raised High Density Fibre (HDF) Panel Doors - |
- |
30847 View breakup
Rs. 30847/- (for panel size less than 2005 H x 800 W x 30 T) + testing charges as per referred ISS.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5, Table-1 (dimension ) |
- |
|
|
|
| 7.1 (Heavy duty (Construction)) |
- |
|
|
|
| 7.2 (Light duty) |
- |
|
|
|
| 7.4 (Lipping ) |
- |
|
|
|
| 7.5 (rebating ) |
- |
|
|
|
| 9 (workmanship and finish) |
- |
|
|
|
| 11.1 (Dimension and squareness test) |
- |
|
|
|
| 11.2 (General flatness test) |
- |
|
|
|
|
- |
-
Excluding Test facility not avaialble for Cl.11.2 General Fattness test, Cl.11.3 Local Planeness Test, Cl.11.4 Impact Indentation test, Cl. 11.6 Edge Loading Test, Cl.11.8 Buckling Test, Cl.11.9 Slamming Test; |
| 613 |
IS 1551 (1991) |
Carbon papers - Typewriters - Specification (Second Revision) |
- |
Rs 3400/- including keeping property, View breakup
Rs 3400/- including keeping property,
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.1 (Description) |
- |
|
|
|
| Cl. 5.2 (Base Paper) |
- |
|
|
|
| Cl. 5.3 (Size) |
- |
|
|
|
| Cl. 5.6 Table 1 S.No. ii) (Durability) |
- |
|
|
|
| Cl. 5.6 Table 1 S.No. ii) (Coating) |
- |
|
|
|
|
- |
-
- |
| 614 |
IS 14490 (2018) |
Plain copier paper - Specification (First Revision) |
- |
4685 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5.5, Table 1, Sl. No. (vii), (a) (Tensile Index (CD)) |
- |
|
|
|
|
- |
-
- |
| 615 |
IS 12928 (1990) |
Precipitated barium carbonate for ceramic and glass industry - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl no 5.1 (Description ) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1 (Barium ( as Ba )) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2 (Barium ( as Ba )) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(ii) ] Annex A-3 Grade-1 (Volatile matter 105 ± 2°C) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(ii) ] Annex A-3 Grade-2 (Volatile matter 105 ± 2°C) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(iii) ] Annex A-4 Grade-1 ref to IS 12305 (Matter insoluble in hydrochloric acid) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(iii) ] Annex A-4 Grade-2 ref to IS 12305 (Matter insoluble in hydrochloric acid) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(iv) ] Annex A-5 Grade-2 only (Free alkali) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(v) ] Annex A-6 Grade-1 (Water soluble sulphide ( as S )) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(v) ] Annex A-6 Grade-2 (Water soluble sulphide ( as S )) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(vi) ] Annex A-7 Grade-1 only (Sulphur ( as SO4 )) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(vii) ] Annex A-8 Grade-1only (Alkali and other metal sulphates ( as BaSO4 ),) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(viii) ] Annex A-9 Grade-1only (Sodium oxide ( as Na2O )) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(ix) ] Annex A-10 Grade-1 & Grade-2 (Total iron ( as Fe2O3 )) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(x) ] Annex A-11 Grade-1only (Tap density) |
- |
|
|
|
| Cl no 5.2 [ Table 1, Sl no.(xi) ] Annex A-12 Grade-1 & Grade-2 (Residue retained on 63 micron IS Sieve) |
- |
|
|
|
|
- |
-
- |
| 616 |
IS 12766 (1997) |
Paper, computer - Specification (First Revision) |
- |
7466 View breakup
Rs.7466, except cl.4.1.2 and cl.4.2 for which testing charges shall be as per relevant ISS
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1 (Grammage ( Substance ) ) |
- |
|
|
|
| 4.5 (Size) |
- |
|
|
|
| 4.6 Table 1 S.no.i) (Bulk ) |
- |
|
|
|
| 4.6 Table 1 S.no.ii) (Moisture) |
- |
|
|
|
| 4.6 Table 1 S.no.iii) (Ash,) |
- |
|
|
|
| 4.6 Table 1 S.no.iv) (Tesile Indec CD) |
- |
|
|
|
| 4.6 Table 1 S.no.iv) (Tesile Indec MD) |
- |
|
|
|
| 4.6 Table 1 S.no.v) (Burst index) |
- |
|
|
|
| 4.6 Table 1 S.no. vi ) (Tear Index Average of CD & MD) |
- |
|
|
|
| 4.6 Table 1 S.no. vii) (One minute cobb test) |
- |
|
|
|
| 4.6 Table 1 S.no. vi ) (Tear Index Average of CD & MD) |
- |
|
|
|
| 4.6 Table 1 S.no.x) (Smoothness) |
- |
|
|
|
|
- |
-
IS is withdrawn. Revisied IS of 2023 is now available.; |
| 617 |
IS 11744 (1986) |
PecificatiOn for phosphorous pentachloride, technical |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl no . 2.1 (Description) |
- |
|
|
|
| Cl no . 2.2 APPENDIX A -2 [Table 1 Sl no. (i)] (Phosphorous pentachloride ( as PCl 5),) |
- |
|
|
|
| Cl no . 2.2 APPENDIX A -3 Table 1 Sl no. (i)] (Bulk density) |
- |
|
|
|
|
- |
-
- |
| 618 |
IS 11673 : Part 2 (2019) |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
- |
Rs.18022/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4.3, Table-1, Sr.no. 1 (Relative density (at 25o/25oC)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 2 (Available Chlorine(as Cl2)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 3 (Total Chlorine(as Cl2)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 4 (Free alkali( as NaOH),) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 5 (Free Sodium Carbonate (as Na2CO3)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 6 (Iron (as Fe)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 7 (Sodium Chlorate ( as NaClO3),) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 8 (Lead (as Pb)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 9 (Arsenic (as As)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 10 (Mercury (as Hg)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 11 (Manganese (as Mn)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 12 (Total chromium (as Cr)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 13 (Cadmium (as Cd)) |
- |
|
|
|
| Cl. 4.3, Table-1, Sr.no. 14 (Selenium (as Se)) |
- |
|
|
|
|
- |
-
Facility is complete for this IS; |
| 619 |
IS 11673 : Part 1 (2019) |
Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
- |
11900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. No. 5.1 (Description Grade 1 & 2) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 1, Annex -A) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 2, Annex -A) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 1, Annex B) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 2, Annex B) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 1, Annex C) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 2, Annex C) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 1, Annex D) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 2, Annex D) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 1, Annex E) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 2, Annex E) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 1, Annex F) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 2, Annex F) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 1, Annex G) |
- |
|
|
|
| Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 2, Annex G) |
- |
|
|
|
|
- |
-
Facility is complete for this IS; |
| 620 |
IS 11087 (1986) |
Specification for paper for magnetic ionk character recognition cheque printing (First Revision) |
- |
Rs.5355.0 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Description ) |
- |
|
|
|
| 3.3 (Substance) |
- |
|
|
|
| Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Smoothness) |
- |
|
|
|
| Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Porosity) |
- |
|
|
|
| Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Tearing strength) |
- |
|
|
|
|
- |
-
Test facility is not available for mentioned exclusion parameters;
Excluding Smoothness, Porosity, Opacity, Stiffness; |
| 621 |
IS 8041 (1990) |
Rapid hardening portland cement - Specific4tion (Second Revision) |
- |
Please see remarks View breakup
Testing charges for the product are: Including Transverse Strength (optional test) test 9,100.00 Excluding Transverse Strength (optional test) test 7,900.00 -Testing charges for only chemical test report: 4,300.00 -Testing charges for only physical test report including optional tests: 4,800.00 -Testing charges for only physical test report excluding optional tests: 3,600.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Fineness 4031 Part 2) |
- |
|
|
|
| 6.2.1 (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 6.2.1 (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 6.3 a) (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 6.3 b) (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
|
- |
-
- |
| 622 |
IS 14887 (2014) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision) |
- |
19750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
|
|
|
| 3.3.1 (Bottom seam (IS 10789)) |
- |
|
|
|
| 4.1 and 3.4 (Mass of bale (Cl. 4.1), Capacity (Cl 3.4)) |
- |
|
|
|
| 4.2 and Table 1 ii (Dimensions ) |
- |
|
|
|
| 3.2 (Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
|
|
|
| 4.2 and Table 1 v (Mass of sack ) |
- |
|
|
|
|
- |
-
Excluding TF not available for 1. Average breaking strength and elongation at break before and after UV radiation and weathering, 2. Linear density/Denier, 3. Tenacity in g/Tex; |
| 623 |
IS 9873 : Part 3 (2017) |
Safety of toys: Part 3 migration of certain elements (Second Revision) |
- |
Rs.14080/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
|
- |
-
2 piece |
| 624 |
IS 7320 (1974) |
Specificaiton for concrete slump test apparatus |
- |
Rs/-300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 (Internal Dimension of mould) |
- |
|
|
|
| Fig 2(Cl3.1 to 3.3) (Construction) |
- |
|
|
|
|
- |
-
- |
| 625 |
IS 9157 (1979) |
Specification for sodium nitrate and potassium nitrate for glass compositions |
- |
1125 for Sodium nitrate, Pota nitrate each View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Description) |
- |
|
|
|
| 3.2 Table 1 i (Moisture and volatile matter) |
- |
|
|
|
| 3.2 Table 1 ii (Matter insoluble in water) |
- |
|
|
|
| 3.2 Table 1 iii (Carbonates) |
- |
|
|
|
| 3.2 Table 1 iv (Nitrites) |
- |
|
|
|
| 3.2 Table 1 v (Chlorides) |
- |
|
|
|
| 3.2 Table 1 vi (Sulphates) |
- |
|
|
|
| 3.2 Table 1 vii (Copper) |
- |
|
|
|
| 3.2 Table 1 viii (Iron) |
- |
|
|
|
| 3.2 Table 1 ix (Manganese) |
- |
|
|
|
| 3.2 Table 1 x (Potassium Compounds) |
- |
|
|
|
| 3.2 Table 1 xi (Sodium Compounds) |
- |
|
|
|
| 3.2 Table 1 xii (Sodium nitrate) |
- |
|
|
|
| 3.2 Table 1 xiii (Potassium nitrate) |
- |
|
|
|
|
- |
-
- |
| 626 |
IS 1264 (1997) |
Brass gravity die castings - Specification (Fourth Revision) |
- |
1435.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0 (Freedom from defects) |
- |
|
|
|
| 9.0 (Pressure test) |
- |
|
|
|
| 6.0 (Shape) |
- |
|
|
|
| 7.0 (Cu) |
- |
|
|
|
| 7.0 (Sn) |
- |
|
|
|
| 7.0 (Pb) |
- |
|
|
|
| 7.0 (Ni) |
- |
|
|
|
| 7.0 (Fe) |
- |
|
|
|
| 7.0 (Al) |
- |
|
|
|
| 7.0 (Mn) |
- |
|
|
|
| 7.0 (Si) |
- |
|
|
|
| 7.0 (Total impurities excluding Ni Pb Al Zn) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 627 |
IS 8887 (2018) |
Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision) |
- |
Rs.7855/- (for grade SS-2) View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9) |
- |
|
|
|
| 6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9) |
- |
|
|
|
| 6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad MS) Annex 9) |
- |
|
|
|
| 6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9) |
- |
|
|
|
| 6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9) |
- |
|
|
|
| 6.6.2 Table-1; 1(viii) (Miscibility with water (Grade RS-1) Annex H) |
- |
|
|
|
| 6.6.2 Table-1; 1(viii) (Miscibility with water (Grade RS-2) Annex H) |
- |
|
|
|
| 6.6.2 Table-1; 1(viii) (Miscibility with water (Grade MS) Annex H) |
- |
|
|
|
| 6.6.2 Table-1; 1(viii) (Miscibility with water (Grade SS-1) Annex H) |
- |
|
|
|
| 6.6.2 Table-1; 1(viii) (Miscibility with water (Grade SS-2) Annex H) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade RS-1) Annex J) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade RS-2) Annex J) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade MS) Annex J) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade SS-1) Annex J) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade SS-2) Annex J) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne,
(Grade RS-1) IS 1216) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne,
(Grade RS-2) IS 1216) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne,
(Grade MS) IS 1216) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne,
(Grade SS-1) IS 1216) |
- |
|
|
|
| 6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne,
(Grade SS-2) IS 1216) |
- |
|
|
|
|
- |
-
Excluding viscosity by saybolt furol viscometer, Determination of coagulation of emulsion at low temperature, Storage stability, Particle charge, Coating ability and water resistance, Stability to mixing with cerment,Penetration, ductility,Distillation in percent volume of distillate recovered at 360 degree celsius, Water content; |
| 628 |
IS 5950 (1984) |
Specification for shot firing cables (For Use Other Than In Shafts) (First Revision) |
- |
11030 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Conductor : Material -IS : 8130-2013) |
- |
|
|
|
| 4.1 (Insulation : Material -IS : 5831-1984) |
- |
|
|
|
| 5.1 (Sheath : materail IS : 5831-1984) |
- |
|
|
|
| 6.1 (Conductor : Construction IS : 8130-2013) |
- |
|
|
|
| 7.1 (Insulation : Application ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - average ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - Min. ) |
- |
|
|
|
| 7.3 (Colour of Insulation) |
- |
|
|
|
| 8.1, 9.1 (c) (Nominal radial thickness of sheath) |
- |
|
|
|
| 8.2 (Thickness of Sheath - min.) |
- |
|
|
|
| 8.3 (Colour of Sheath) |
- |
|
|
|
| 9.1 a) (Annealing test) |
- |
|
|
|
| 9.1 b) (Conductor resistance test) |
- |
|
|
|
| 9.1 d) i) (Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) i) (Sheath : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Sheath : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation ) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - insulation ) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - Sheath ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - insulation ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - sheath ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - insulation ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - insulation ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage : Crack observed - insulation ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage: Crack observed - Sheath ) |
- |
|
|
|
| 10.2 (Voltage test ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test: Volume resistivity ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test : IR constant) |
- |
|
|
|
| 10.4 (Flammability Test ) |
- |
|
|
|
| 11.1 (Manufacturer’s Identification) |
- |
|
|
|
|
- |
-
- |
| 629 |
IS 5430 (2017) |
Ammonia preserved concentrated natural rubber latex (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Colour) |
- |
|
|
|
| 4.2 (Odour) |
- |
|
|
|
| 4.3 ( Table 1) (1. Dry rubber content,(Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (2. Non-rubber solids ,(Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (3. Coagulum content, (Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (4. Sludge content (Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type HA) ) |
- |
|
|
|
| 4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type MA) |
- |
|
|
|
| 4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type LA) ) |
- |
|
|
|
| 4.3 ( Table 1) (6. KOH number (Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (7. Mechanical stability, (Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (8. Volatile fatty acid number (Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (9. Copper content,(Type HA, Type MA, Type LA)) |
- |
|
|
|
| 4.3 ( Table 1) (10. Manganese content (Type HA, Type MA, Type LA)) |
- |
|
|
|
|
- |
-
Excluding Volatile fatty acid number parameter; |
| 630 |
IS 2041 (2009) |
Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9 (Workmanship) |
- |
|
|
|
| Cl 10 (Length, Width & Thickness) |
- |
|
|
|
| Cl 12.1 (UTM) |
- |
|
|
|
| Cl 12.2 (Press) |
- |
|
|
|
| Cl 12.3 (Load Impact ) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Carbon-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Sulphur-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Phosphorous-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Manganese-IS228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Silicon-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Aluminium-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Nitrogen- IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Niobium) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Vanadium) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Titanium) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Chromium-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Copper-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Molybdenum-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Nickel-IS 228) |
- |
|
|
|
| Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Vanadium+Niobium+ Titanium) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
