BIS - LIMS (Laboratory Information Management System)

BIS, Eastern Regional Laboratory (ERL)

(1) Annex Building & Sample-Cell: Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W,Kankurgachi,Kolkata-700054 (2) Main building: 1/14, CIT Scheme VII M, VIP Road, Kankurgachi,Kolkata-700054, Kolkata, Kolkata, West Bengal, 700054

- erol@bis.gov.in

Scope List

Reset

343 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17786 (2022)

Medical Textiles Underpad Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 8.1 (PH Value)	-
Clause 5, Table 1 (Dimensions of underpad, mm)	-
Clause 6 (WORKMANSHIP AND FINISH)	-
Clause 8.3.1 (Bacterial and Fungal Bioburden)	-
Clause 8.3.2 (Test for Common Skin Pathogen - Staphylococcus Aureus)	-
Clause 4.2 (Top Cover or Top Sheet)	-
Clause 4.3 (Absorbent Core)	-
Clause 4.4 (Outer Protective Barrier or Back Sheet)	-
Clause 4.5 (Adhesive)	-

-
Partial (Except: Minimum Absoption Capacity, Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization)

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (pH value (IS 1390))	-
3.1 (Cover/Top sheet)	-
3.2 (Absorbent core)	-
3.3 (Barrier or bottom sheet)	-
4.1 (Types)	-
4.2 (shapes)	-
5 (Sizes)	-
Cl. 5 Table-1 (Length (Absorbent core only))	-
Cl. 5 Table-1 (Width (Absorbent core only))	-
6.1 (Manufacture, workmanship and finish)	-
6.2 (Manufacture, workmanship and finish)	-
7.2 (Ability to withstand Pressure after absorption)	-
7.3.1 (Bacterial and Fungal Bioburden)	-
7.3.2 (Staphylococcus aureus)	-
Cl 7.5 (Phthalate test- Di-iso-butyl phthalate (DIBP))	-
Cl 7.5 (Phthalate Test- Di-n-butyl phthalate (DBP))	-
Cl 7.5 (Phthalate Test- Benzylbutyl Phthalate (BBP))	-
Cl 7.5 (Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-
Cl 7.5 (Phthalate Test- Di-n-octyl phthalate (DNOP))	-
Cl 7.5 (Phthalate Test- Di-iso-nonylphthalate (DINP))	-
Cl 7.5 (Phthalate Test- Di-iso-decyl phthalate (DIDP))	-

-
Partial (Except Bio-compatibility & Skin sensitivity tests)

IS 19084 (2024)

Plastic Containers and Closures for Homoeopathic Pharmaceutical Preparations ï¿½ Specification

Mech: Screw neck or drop-dispensing plastic bottle: 500 ml & Jar: 500 ml, 1000 ml, 2000 ml

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3 (Capacity)	-
4.4 (Design, Shape and Dimension)	-
4.6 (Mass)	-
4.8 (Wall Thickness)	-
4.9 (Workmanship and Finish)	-
5.2 (Leakage Test)	-
5.3 (Drop Impact Test)	-
5.4 (Collapsibility Test)	-
5.7 (Verticality test)	-
5.8 (Transparency)	-
5.9 (Stack Load Test)	-

-
Mechanical- Complete(For above 500 ml), Chemical- Partial Except Cl.4.1.1 - Material for Plastic container, Cl.4.1.2 - Material for Plastic Closures, Cl.4.2 - Pigments and Colorants Sample required: Mechanical- Quantity - 12 filled & 14 empty Chemical- For 5,10,15 ml capacity ~ 175 pieces, For 30, 50, 100 ml capacity ~70 pieces, For 500 ml capacity - 50 pieces

IS 18166 (2025)

Unplasticized Polyvinyl Chloride PVC-U Threaded Column Pipes for Borewells/Tubewells - Specification

For all nominal size and class

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (COLOUR)	-
6 (CLASSIFICATION)	-
7, Table - 2,3,4,7 (DIMENSIONS)	-
8.3 , Table 5, 6 (Basic Thread Dimensions)	-
9.1 (Visual Appearance)	-
9.2 (Resistance to External Blows at 0 °C)	-
9.4 (Tensile Strength)	-
9.4 (Elongation at Break)	-
9.8 (Density)	-
9.9 (Vicat Softening Temperature)	-
8.1 (Column Pipes)	-
8.2 (Column Couplers)	-
8.4 (Sealing rings and elements made of elastomeric material such as EPDM,)	-
9.6 (Izod Impact Strength Test)	-
9.9 (Vicat Softening Temperature)	-
8.1 (Column Pipes)	-
8.2 (Column Couplers)	-
8.4 (Sealing rings and elements made of elastomeric material such as EPDM,)	-
9.5 , Table- 9 (Ultimate Breaking Load)	-
9.11 (Hydrostatic Pressure Test)	-
9.12 (Joint Leak Pressure Test)	-
9.3 (Flattening Test)	-
9.7 (Resistance to DCM)	-
9. 10 (Effect on Water Lead (first extraction))	-
9. 10 (Effect on Water Lead (third extraction))	-
9. 10 (Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-
9. 10 (Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-
9. 10 (Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-

-
Except 9.5 Ultimate Breaking Load, 9.6 Izod Impact Strength Test, 9.11 Hydrostatic Pressure Test, 9.12 Joint Leak Pressure Test, 9.3 Flattening Test. Sample required- 16 pieces pipes approx 1 m (Mechanical- 10 pc and chemical- 6 pc)

IS 15905 (2024)

Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories — Spigot Series —Specification

For all sizes except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-10.2 (External Diameters and Tolerances)	-
Cl-10.3 (Thickness and Tolerances)	-
Cl-10.5 (Tolerances on Angles)	-
Cl-10.6 (Straightness of Pipe)	-
7 ("VISUAL INSPECTION AND HAMMER TEST")	-
6 (JOINTS)	-
11 (COATING)	-

-
Mech: Except 8 (crushing Test), 9 (Hydrostatic Test), 11.2 (resistance to salt spray)

IS 8086 (2024)

Rehabilitation Equipment â Wheelchairs, Folding, Junior Size â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
SHAPE AND DIMENSIONS (As per Table-1)	-
Cl-6 (MATERIALS)	-
Cl-7.1 (Backrest and Seat)	-
Cl-7.2 (Frame)	-
Cl-7.3 (Footrests and Supports)	-
Cl-7.4 (Armrests)	-
Cl-7.5 (Hand Rims)	-
Cl-7.6 (Brakes)	-
Cl-7.7 (Castors)	-
Cl-7.8 (Wheels)	-
Cl-7.9 (Clothing Guards)	-
Cl-7.11 (Lubrication)	-
Cl-8 (FINISH)	-
Cl-9.1 (Test for Wheeling)	-
Cl-9.3 (Load Test)	-
Cl-11 (MARKING)	-

-
Partial Mech: except 9.2 Hazard running test, 9.4 Test for folding

IS 3626 (2024)

Locked Coil Winding Ropes â Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1,6 Table-1 (Nominal rope diameter)	-
Cl-4.2 (Length)	-

-
-

IS 7142 (2025)

Welded Low Carbon Steel Cylinders for Low Pressure Liquefiable Gases not exceeding 5 Litre Water Capacity - Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-8.1 (Agreed Finished Thickness)	-
Cl-10.1 (Test of Handle or other suitable arrangement)	-
Cl-10.2 (Foot- ring)	-
Cl-10.3 (Bung)	-
Cl-13 (Checking of Water Capacity)	-
Cl-14 (Proof Test)	-
Cl-15 (Pneumatic Leakage Test)	-
Cl-16.1 (Hydrostatic Stretch Test)	-
Cl-16.2 (Bursting Test)	-
Cl-17.1.1 (Tensile Test)	-
Cl-17.1.2 (Weld Tests)	-
Cl-17.1.3 (Minimum Thickness Test)	-

-
-

IS 5950 (2024)

Shot Firing Cables (for Use Other than in Shafts) - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Section-3, Cl-6 (CONDUCTOR)	-
Section-3, Cl-7.2 (Tolerance on Thickness of Insulation)	-
Section-3, Cl-7.3 (Colour of Insulation)	-
Section-3, Cl-8.1 (Single-Core)	-
Section-3, Cl-8.2 (Tolerance on Thickness of Sheath)	-
Section-3, Cl-8.3 (Color of Sheath)	-
Cl-10.2 (Voltage Test)	-
Cl-10.4 (Flammability Test)	-
Cl-9.1 (a) (Annealing test;)	-
Cl-9.1 (b) (Conductor resistance test)	-
Cl-9.1 (c) (Test for thickness of insulation and sheath)	-
Cl-9.1 (d) 1 (Tensile strength and elongation at break)	-
Cl-9.1 (d) 2 (Ageing in air oven)	-
Cl-9.1 (d) 3 (Loss of mass test)	-
Cl-9.1 (d) 4 (Hot deformation)	-
Cl-9.1 (d) 5 (Heat shock)	-
Cl-9.1 (d) 6 (hrinkage)	-
Cl-9.2 , e (Insulation resistance test)	-

-
Complete

IS 5290 (2025)

Landing Valves - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6 (FINISH)	-
Cl-4.3, Table-1 (Flanged -Outer Diameter)	-
Cl-4.3, Table-1 (Flanged - Thickness)	-
Cl-4.3, Table-1 (Flanged -Pitch Circle Diameter (PCD))	-
Cl-4.3, Table-1 (Flanged -No. of Holes × Diameter of Hole)	-
Cl-4.3, Table-1 (Threaded)	-
Cl-4.2 (shape and dimensions of)	-
Cl-4.4 (Outlet(s) of landing valve)	-
Cl-4.4 (dimensions- outlet adaptor)	-
Cl-4.4 (dimensions- Blank cap for outlet)	-

-
Facility not available for performance test, Al, Ti

IS 903 (2025)

Fire Hose Delivery Couplings, Branch Pipe, Nozzles and Nozzle Spanner - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4 (WORKMANSHIP AND FINISH)	-
Cl. 5 ("INSTANTANEOUS DELIVERY HOSE COUPLINGS")	-
As per Clause 5.2, 6.2, 7.2, 10.2 (Dimensions & Tolerances)	-
Cl. 6 (BRANCH PIPE)	-
Cl. 7 (NOZZLES)	-
Cl. 10 (NOZZLE SPANNER)	-

-
Facility not available for Hydraulic test & critical dimensions, Sn,Si,Mn,Al,Sb

IS 444 (2025)

Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
except physical test,performance and pressure requirements; except Proof pressure ,Change in length, Min Burst pr , Adhesion between components, Ozone resistance , Flexibility at 23 °C, Flexibility at low temp cl 13 RADIOGRAPHIC EXAMINATION ;

IS 4296 : Part 2 (2024)

Tools for Pressing Punches Part 2 Punches with Cylindrical Head and Straight or Reduced Shank (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1.1 (Punches with Straight Shank Type)	-
Cl-4.1.2.1 (Punches with round shape Type B)	-
Cl-4.1.2.2 (Punches with Reduced Shank with Different Shapes)	-
Cl-4.2.1 (Pilot Punches Type C)	-
Cl-4.2.2 (Positive Pilot Punches — Type D)	-
Cl-4.3.1 (Punches with Ejector with Straight Shank — Type E)	-
Cl-4.3.2.1 (Punches with ejector with round shape — Type F)	-
Cl-4.3.2.2 (Punches with Ejector with Different Shapes — Type F)	-
Cl-5 (Material and hardness)	-

-
Facility not available for Perpendicularity and radius (r)

IS 9738 (2025)

POLYETHYLENE BAGS FOR GENERAL PURPOSES - SPECIFICATION (third revision)

For all Size and thickness

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6 ("Material Polyethylene films of low density polyethylene (LDPE), linear low density polyethylene (LLDPE), High density polyethylene (HDPE), High molecular high-density polyethylene (HMHDPE)")	-
Cl-8.4 (Drop Test)	-
Cl-8.3 (Printing Ink Adhesion Test)	-
Cl-8.2 (Water Leak Test)	-
Cl-8.1 (Appearance)	-
Cl-7.3 (Thickness)	-
Cl-7.1, Table-2 (Dimensions of Flat Bags- Size b × l)	-
Cl-7.1, Table-2 (Dimensions of Flat Bags- Nominal Thickness of Film -LDPE/LLDPE/Blends)	-
Cl-7.1, Table-2 (Dimensions of Flat Bags- Nominal Thickness of Film -HMHDPE)	-
Cl-7.1, Table-3 (Dimensions of U-Shaped Bags (Gusseted)- Size b × l)	-
Cl-7.1, Table-3 ("Dimensions of U-Shaped Bags (Gusseted)- Nomination Thickness of Film- LDPE/LLDPE/Blends")	-
Cl-7.1, Table-3 ("Dimensions of U-Shaped Bags (Gusseted)- Nomination Thickness of Film- HMHDPE")	-
Cl-7.1, Table-3 (Dimensions of U-Shaped Bags (Gusseted)- Nominal Finish Width b)	-
Cl-7.1, Table-4 (Dimensions of Bottom Seal Flat Bags- Size b × l)	-
Cl-7.1, Table-4 ("Dimensions of Bottom Seal Flat Bags Nomination Thickness of Film- LDPE/LLDPE/Blends")	-
Cl-7.1, Table-4 ("Dimensions of Bottom Seal Flat Bags Nomination Thickness of Film- HMHDPE")	-

-
Complete

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.3.1 a ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-
Cl-5.3.1 b ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-
Cl-5.3.1 c ("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-
Cl-5.1 (Material)	-
Cl-7 (Dimension)	-

-
Except Others Eliments V, B, Ga and Others.

IS 266 (2024)

Sulphuric Acid âSpecification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3.1 & Table 1, S.No (i) ("Total acidity (as H2SO4) (Technical Grade)")	-
4.3.1 & Table 1, S.No (ii) ("Residue on ignition (Technical Grade)")	-
4.3.1 & Table 1, S.No (iii) ("Iron (as Fe) (Technical Grade)")	-
4.3.1 & Table 1, S.No (v) ("Heavy metals (as lead) (Technical Grade)")	-
4.3.1 & Table 1, S.No (vi) ("Arsenic (as As) (Technical Grade)")	-

-
Complete for technical grade. Grade to be declared.

IS 1855 (2024)

STRANDED STEEL WIRE ROPES FOR WINDING AND MAN-RIDING HAULAGES IN MINES - SPECIFICATION ( Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (ROPE SIZE AND TOLERANCE)	-
Cl-5 (Minimum breaking force)	-
Cl-6.1 (Wire)	-
Cl-6.4.1 (Direction of Lay)	-
Cl-6.5 (Mass)	-
Cl-7 (Galvanizing)	-
Cl-9 (FREEDOM FROM DEFECTS)	-
Cl.6 (Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.6 (Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.6 (Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.6 (Phosphorus - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.6 (Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.6 (Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.6 (Copper - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.6 (Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-

-
Declarations required - Nominal dia, Type of core, Rope grade.

IS 4109 (2023)

KADAHI - SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1, Table-1 (i) (Kadahi Body)	-
Cl-3.1, Table-1 (ii) (Handle)	-
Cl-3.1, Table-1 (iii) (Rivet)	-
Cl-4.1, Table-2 (Round Shape nominal)	-
Cl-4.1, Table-2 (Round Shape-Overall Height H1)	-
Cl-4.1, Table-2 (Round Shape-Thickness at Bottom* Min)	-
Cl-4.1, Table-2 (Round Shape-Dia of Rod for Handle Min)	-
Cl-4.1, Table-2 (Raound shape-Pull Test Load)	-
Cl-4.1, Table-3 (Bowl Shape-Nominal Overall Height H1)	-
Cl-4.1, Table-3 (Bowl Shape- Thickness at Bottom Min)	-
Cl-4.1, Table-3 (Bowl Shape- Dia of Rod for Handle Min)	-
Cl-4.1, Table-3 (Bowl Shape- Pull Test Load)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Overall Height Round Shape H1)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Overall Height Bowl Shape H2)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Thickness at Bottom Min)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Dia of Rod for Handle)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Pull Test Load)	-
Cl-5.3, Table-5 (Diameter, in mm)	-
Cl-5.3, Table-5 (Minimum Height)	-
Cl-5.3, Table-5 (Minimum width)	-
Cl-5.3, Table-5 (Minimum gap between rivet holes/weld)	-
Cl-5.3, Table-5 (Riveted/Welded)	-
Cl-6.1 (Pull Test)	-
Cl-6.2 (Leakage Test)	-

-
Mechanical- Complete

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

For all grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 12 (UTM)	-
Cl 13 (Press)	-
Cl 14 (Workmanship)	-
Cl 9 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Copper %)	-
6.1 (V)	-
6.1 (Cr)	-
6.1 (Mo)	-
6.1 (Ni)	-
6.1 ( Nitrogen%)	-
6.1 (CE)	-

-
Mech: Except elevated temperature tensile test and Ultrasonic Test

IS 2041 (2009)

Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 9 (Freedom from Defect)	-
Clause 9.3 (Edge Imperfection)	-
Clause 11 (Theoretical Mass)	-
Clause 12.1, Table 3 (Tensile strength)	-
Clause 12.1, Table 3 (Yield Stress)	-
Clause 12.1, Table 3 (Elongation)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Carbon-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Sulphur-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Phosphorous-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Manganese-IS228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Silicon-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Nitrogen- IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Nickel-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Chromium-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Copper-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Molybdenum-IS 228)	-
Clause 12.2 (Bend Test)	-
Clause 12.3 (Low Temperature Charpy Impact Test)	-
Clause 10 (Length)	-
Clause 10 (Width)	-
Clause 10 (Thickness)	-
Clause 10 (Flatness)	-
Clause 10 (Out of squareness)	-

-
Mech: Except Impact test at -40 and ultrasonic test

IS 2041 (2024)

Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature â Specification (Fourth Revision)

All grades and sizes except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-9 (FREEDOM FROM DEFECTS)	-
Cl-9.3 (Edge Imperfection)	-
Cl-10 (DIMENSIONS AND TOLERANCES)	-
Cl-11 (THEORETICAL MASS)	-
Cl-12.1.6 (Tensile Test Result)	-
Cl-12.2 (Bend Test)	-
Cl-12.3.1 (Charpy impact test)	-
Cl-7.1, Table-1 (C)	-
Cl-7.1, Table-1 (S Max)	-
Cl-7.1, Table-1 (P max)	-
Cl-7.1, Table-1 (Mn Max)	-
Cl-7.1, Table-1 (Si)	-
Cl-7.1, Table-1 (N Max)	-
Cl-7.1, Table-1 (Ni Max)	-
Cl-7.1, Table-1 (Cr Max)	-
Cl-7.1, Table-1 (Cu Max)	-
Cl-7.1, Table-1 (Mo Max)	-

-
Mech: Except Impact test at -40 and ultrasonic test

IS 1838 : Part 3 (2011)

Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Dimension and tolerances)	-
6 Table-1 i (Resistance to handling)	-
6 Table-1 iii (Compression test in accordance with IS 10566)	-
6 Table-1 v (Water absorption test in accordance with IS 10566)	-
6 Table-1 vi (Test for Density in accordance with IS 10566)	-
6 Table-1 viii (Weathering test in accordance with IS 10566)	-

-
Complete

IS 266 (1993)

Sulphuric acid - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.2 (Description)	-
4.2&3 Table-1(i) (Total Acidity (as H2So4),)	-
4.2 Table-1(iii) (Iron (as Fe),)	-
4.2&3 Table-1(iv) (Chlorides (as ),)	-
4.2, Table-1(vii) (Oxiddizable Impurities(as S02),)	-
4.2Table-1(viii) (Organic matter)	-
4.2 Table-1(xi) (Selenium(as Se),)	-
4.2 Table-1(xii) (Mangnese (as Mn),)	-
4.2Table-1(v) (Lead (as Pb))	-
4.2 Table-1(xiii) (Copper (as cu),)	-
4.2, Table-1(xiv) (Zinc (as Zn),)	-
4.2, Table-1(xv) (Nitrates,nitrites and ammonia(as N),)	-
4.2, Table-1(ix) (Nitrate)	-
4.2, Table-1(x) (Ammonia)	-

-
Grade to be declared.

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

For all capacity.

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.6.1.1 (Transparency)	-
Clause 4.6.2 (Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-
Clause 4.6.4.1 (Overall Migration Container)	-
Clause 4.6.4.1 (Overall Migration Closure)	-
Clause 4.6.4.2 (Specific Migration Container Barium)	-
Clause 4.6.4.2 (Specific Migration Container Cobalt)	-
Clause 4.6.4.2 (Specific Migration Container Copper)	-
Clause 4.6.4.2 (Specific Migration Container Iron)	-
Clause 4.6.4.2 (Specific Migration Container Lithium)	-
Clause 4.6.4.2 (Specific Migration Container Manganese)	-
Clause 4.6.4.2 (Specific Migration Container Zinc)	-
Clause 4.6.4.2 (Specific Migration Closure Antimony)	-
Clause 4.6.4.2 (Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-
Clause 4.6.4.2 (Specific Migration Closure Barium)	-
Clause 4.6.4.2 (Specific Migration Closure Cobalt)	-
Clause 4.6.4.2 (Specific Migration Closure Copper)	-
Clause 4.6.4.2 (Specific Migration Closure Iron)	-
Clause 4.6.4.2 (Specific Migration Closure Lithium)	-
Clause 4.6.4.2 (Specific Migration Closure Manganese)	-
Clause 4.6.4.2 (Specific Migration Closure Zinc)	-
Clause 4.6.4.2 (Specific Migration Closure Antimony)	-
Clause 4.6.4.2 (Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-
Clause 4.6.4.3 (Colour migration Container)	-
Clause 4.6.4.3 (Colour migration Closure)	-

-
Material test being done fof PET only.

IS 9294 (2023)

COLD-ROLLED STAINLESS STEEL STRIPS FOR RAZOR BLADES - Specification (First Revision)

All thickness

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-8.1 (Hardness test)	-
Cl-8.2 (hardness of cold-rolled)	-
Cl-9.1 (Microstructure)	-
Cl-13.1 (Width)	-
Cl-13.1 (Thickness)	-
Cl-13.2.2 (Edge Camber (Straightness))	-
Cl-13.2.3 (Edge Ripple)	-
Cl-14 (Surface Finish)	-
Cl-12 (Edge Condition)	-
Cl-6 (FREEDOM FROM DEFECTS)	-

-
Chemical: Except sulphur

IS 16088 (2012)

Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1.1 IS 12235 (Part 1) Table 1 (Mean outside Diameter)	-
7.1.1.1 IS 12235 (Part 1) Table 1 (Outside Diameter at any point)	-
7.1.2 IS 12235 (Part 1) Table 1 (Wall Thickness )	-
9.1 (Visual Appearance)	-
7.1.3 (Length)	-
8 (Pipe Ends)	-
9.2 IS 12235 (Part 3) (Opacity)	-
9.3 (Reversion test : )	-
9.4 (Vicat Softening temperature: )	-
9.5 (Density)	-
10.2 (resistance to external blows at 0 deg c)	-
10.4 IS 12235(Part 19) (Tensile Strength : )	-

-
Except Short term test (cl. 10.1.1), Long Term Test (cl. 10.1.2), Fire Exposure Test(cl 9.6), Flammability Test (cl 9.7), Flattening Test (cl 10.3 ), Kinking Resistance Test(Cl 10.5), CPVC Fire sprinkler pipes and fitting (cl. 10.6).

IS 5872 (2025)

Steel strapping for packaging ( Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause. 7.0 (Reverse Bend Test)	-
Clause. 6.0 (Tensile Test)	-
Clause. 6.0 (Elongation test)	-
Clause. 5.0 (Carbon)	-
Clause. 5.0 (Manganese)	-
Clause. 5.0 (Sulphur)	-
Clause. 5.0 (Phosphorus)	-

-
Excluding Salt spray test and micro alloying elements (V,Nb,B,Ti)

IS 12679 (2023)

By-Product Gypsum for Construction - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4, Table-1 (i) (P2O5, percent by mass, Max)	-
Cl-4, Table-1 (ii) (F, percent by mass, Max)	-
Cl-4, Table-1 (iii) (Na2 O, percent by mass, Max)	-
Cl-4, Table-1 (iv) (K2 O, percent by mass, Max)	-
Cl-4, Table-1 (v) (Organic matter, percent by mass, Max)	-
Cl-4, Table-1 (vi) (CaSO4.2H2O, percent by mass, Min)	-
Cl-4, Table-1 (vii) (Cl as NaCl, percent by mass, Max)	-
Cl-4, Table-1 (viii) (pH of 10 percent aqueous suspension of gypsum, Min)	-
Cl-4, Table-1 (ix) (free water, percent by mass, Max)	-

-
Complete

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Sack Type)	-
5.2.1 (Fabric)	-
5.2.2 (Linear density of tapes)	-
5.2.4 (Unlaminated fabric mass)	-
5.3.1.2.1 (Mass of nonwoven fabric in sandwich extrusion lamination)	-
5.4.1 (Sack)	-
5.4.1.1 (Centre seam)	-
5.4.1.2 (Bottom seam)	-
6.1.1, Table 1 (Inside length)	-
6.1.1, Table 1 (Inside width)	-
6.1.1, Table 1 (Gusset width)	-
6.1.1, Table 1 (Warp per dm)	-
6.1.1, Table 1 (Weft per dm)	-
6.1.1, Table 1 (Mass of laminated fabric)	-
6.2, Table 1 (Average breaking strength - Lengthwise)	-
6.2, Table 1 (Average elongation at break of fabric - Widthwise)	-
6.2, Table 1 (Breaking strength of bottom seam)	-
6.2, Table 1 (Breaking strength of centre seam)	-
6.2, Table 1 (Average elongation at break of fabric - Lengthwise)	-
6.2, Table 1 (Average elongation at break of fabric - Widthwise)	-
6.4 (Drop Impact Testing of Filled Sacks)	-

-
Except UV Resistance

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 & Table 2 (Size code)	-
6.1 & Table 2 (Descriptive size)	-
6.3.2 & Table 3 (Minimum force at break before accelerated ageing)	-
6.3.2 & Table 3 (Minimum Elongation at break before accelerated ageing)	-
6.3.3 & Table 3 (Minimum force at break after accelerated ageing)	-
6.3.3 & Table 3 (Minimum Elongation at break after accelerated ageing)	-
6.2 (Watertightness)	-
6.1 & Table 2 (Width corresponding to size code (dimension w,Figure 1))	-
6.1 & Table 2 (Width corresponding to Descriptive size (dimension w,Figure 1))	-
6.1 & Table 2 (Minimum length (dimension l, Figure 1))	-
6.1 & Table 2 (Minimum thickness (at locations shown in Figure 2))	-
6.1 & Table 2 (Maximum thickness (at approximate centre of palm))	-

-
Except water tightness and sterility test

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Eastern Regional Laboratory (ERL)

(1) Annex Building & Sample-Cell: Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W,Kankurgachi,Kolkata-700054 (2) Main building: 1/14, CIT Scheme VII M, VIP Road, Kankurgachi,Kolkata-700054, Kolkata, Kolkata, West Bengal, 700054

- erol@bis.gov.in

Scope List