121 |
IS 1167 (2021) |
EDIBLE CASEIN PRODUCTS - SPECIFICATION |
-
|
11000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Clause 4.2(Description-IS 1167) |
- |
200 |
|
- |
Clasuse 4.4(Particle Size (500 micron IS sieve)-IS 460(P-1)) |
- |
400 |
|
- |
Table 1 (Clause 4.6) (i)(Milk Protein- (ODB)-IS 11917) |
- |
500 |
|
- |
Table 1 (Clause 4.6) (iii)(Casein in milk protein-ISO 17997-1 or ISO 17997-2) |
- |
600 |
|
- |
Table 1 (Clause 4.6) (iv)(Milk Fat-ISO 5543) |
- |
400 |
|
- |
Table 1 (Clause 4.6) (v)(Ash(including P2O5)-IS 11919) |
- |
300 |
|
- |
Table 1 (Clause 4.6) (vi)(Lactose-IS 11963) |
- |
700 |
|
- |
Table 1 (Clause 4.6) (ix)(Maximum Sediment (Scorched Parcticals)-IS 11888) |
- |
300 |
|
- |
Table 1 (Clause 4.6) (vii)(Free acid, ml of 0.1 N NaOH-IS 11964) |
- |
400 |
|
- |
Table 1 (Clause 4.6) (viii)(pH (in 10 % Solution)-IS 11918) |
- |
400 |
|
- |
Table 2 (Clause 4.6) (i)(Aerobic plate count-IS 5402 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(ii)(Coliform count-IS 5401 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(iii)(Staphylococcuus aureus (Coagulase positive)-IS 5887 (Part 2) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(iv)(Yeast & mould count-IS 5403 (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(v)(Salmonella sp.-IS 5887 (Part 3) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(vi)(Listeria monocytogenes-IS 14988 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(vii)(Bacillus cereus-IS 5887 (Part 6) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(viii)(Sulphite reducing clostridia-ISO 15213 (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 2 (Clause 4.6)(ix)(Escherichia coli-IS 5887 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
600 |
|
- |
Table 1 (Clause 4.6) (x)(Copper-ISO 5738/ILL/STP/INST/ICP/001) |
- |
500 |
|
- |
Table 1 (Clause 4.6) (xi)(Iron-ISO/TS 6733/ILL/STP/INST/ICP/001) |
- |
500 |
|
- |
Table 1 (Clause 4.6) (ii)(Moisture-IS - 11920 or 16072) |
- |
400 |
|
- |
Clause 4.2(Description-IS 1167) |
- |
0 |
|
Parameter already listed above |
Clasuse 4.4(Particle Size (500 micron IS sieve)-IS 460(P-1)) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (i)(Milk Protein- (ODB)-IS 11917) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (iii)(Casein in milk protein-ISO 17997-1 or ISO 17997-2) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (iv)(Milk Fat-ISO 5543) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (v)(Ash(including P2O5)-IS 11919) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (vi)(Lactose-IS 11963) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (ix)(Maximum Sediment (Scorched Parcticals)-IS 11888) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (vii)(Free acid, ml of 0.1 N NaOH-IS 11964) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (viii)(pH (in 10 % Solution)-IS 11918) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6) (i)(Aerobic plate count-IS 5402 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(ii)(Coliform count-IS 5401 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(iii)(Staphylococcuus aureus (Coagulase positive)-IS 5887 (Part 2) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(iv)(Yeast & mould count-IS 5403 (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(v)(Salmonella sp.-IS 5887 (Part 3) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(vi)(Listeria monocytogenes-IS 14988 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(vii)(Bacillus cereus-IS 5887 (Part 6) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(viii)(Sulphite reducing clostridia-ISO 15213 (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 2 (Clause 4.6)(ix)(Escherichia coli-IS 5887 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan)) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (x)(Copper-ISO 5738/ILL/STP/INST/ICP/001) |
- |
0 |
|
Parameter already listed above |
Table 1 (Clause 4.6) (ii)(Moisture-IS - 11920 or 16072) |
- |
0 |
|
Parameter already listed above |
|
Complete
|
|
31 Dec, 2026 |
- |
122 |
IS 17735 (2021) |
Aluminium Chlorohydrate Specification |
-
|
13800 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.1(Description - IS 17735:2021) |
- |
200 |
|
Total testing charges excluding Total Organic Carbon are Rs. 13800/- |
4.2, Table 1 (i)(Aluminium Compounds (as Al2O3) - IS 15573:2018) |
- |
1000 |
|
NA |
4.2, Table 1 (ii)(Relative Basicity - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (iii)(Chloride (as Cl) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (iv)(Specific Gravity at 25°C - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (xiv)(Water Insoluble - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (xv)(pH of 5% aqueous solution(W/V) - IS 15573:2018) |
- |
600 |
|
NA |
4.2, Table 1 (xvi)(Turbidity - IS 17735:2021) |
- |
600 |
|
NA |
4.2, Table 1 (xviii)(Dynamic Viscosity at 20°C - IS 9316 (Part - 2) : 1987 & IS 6213 (Part - 4) : 1971) |
- |
1000 |
|
NA |
4.2, Table 1 (v)(Mercury (as Hg) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (vi)(Arsenic (as As) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (vii)(Cadmium (as Cd) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (viii)(Lead (as Pb) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (ix)(Iron (as Fe) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (x)(Manganese (as Mn) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (xi)(Chromium (as Cr) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (xii)(Selenium (as Se) - IS 15573:2018) |
- |
800 |
|
NA |
4.2, Table 1 (xvii)(Nickel (as Ni) - IS 3025 (Part - 54) : 2003) |
- |
800 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
123 |
IS 17450 (2020) |
1,3 Phenylenediamine ” Specification |
-
|
10000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1(Description - IS 17450:2020) |
- |
500 |
|
NA |
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020) |
- |
2000 |
|
NA |
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020) |
- |
2000 |
|
NA |
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020) |
- |
2000 |
|
NA |
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001) |
- |
1500 |
|
NA |
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001) |
- |
1000 |
|
NA |
3.2, 4.3 Table 1 v)(Other unknown impurities - IS 17450:2020) |
- |
1000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
124 |
IS 17412 (2020) |
Trimethyl Phosphite ” Technical Grade |
-
|
9000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1(Description - IS 17412:2020) |
- |
300 |
|
NA |
3.2, Table 1 (i)(Trimethyl Phosphite (TMP) - IS 17412:2020) |
- |
1500 |
|
NA |
3.2, Table 1 (ii)(Dimethyl Phosphite (DMHP) - IS 17412:2020) |
- |
1500 |
|
NA |
3.2, Table 1 (iii)(Dimethyl Methyl Phosphonate (DMMP) - IS 17412:2020) |
- |
1500 |
|
NA |
3.2, Table 1 (iv)(Trimethyl Phosphate (TMPO) - IS 17412:2020) |
- |
1500 |
|
NA |
3.2, Table 1 (v)(Methanol - IS 17412:2020) |
- |
1500 |
|
NA |
3.2, Table 1 (vi)(Refractive Index at 25°C - IS 17412:2020) |
- |
1200 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
125 |
IS 12361 (1988) |
Specification for partially hydrogenated rice bran fatty acids |
-
|
13500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
2.1/2.2(Description - IS 12361:1988) |
- |
1000 |
|
NA |
2.3, 4.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
2.3, 4.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
2.3, 4.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
2.3, 4.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
2.3, 4.1 Table 1 (v)(Mineral Acidity - IS 12361:1988) |
- |
1500 |
|
NA |
2.3, 4.1 Table 1 (vi)(Ash - IS 12361:1988) |
- |
1000 |
|
NA |
2.3, 4.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
2.3, 4.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
2.3, 4.1 Table 1 (ix)(Colour) |
- |
1500 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
126 |
IS 12124 (1987) |
Specification for rubberseed fatty acids |
-
|
14500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1/3.1.1/3.2(Description - IS 12124:1987) |
- |
1000 |
|
Testing charges for Description as per Clause 3.1.1. and 3.2 are Rs. 500/- each |
3.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3,Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, Table 1 (v)(Mineral Acidity - IS 12124:1987) |
- |
1000 |
|
NA |
3.3, Table 1 (vi)(Ash - IS 12124:1987) |
- |
1500 |
|
NA |
3.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, Table 1 (ix)(Colour) |
- |
1000 |
|
NA |
3.3, Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
1000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
127 |
IS 12069 (1987) |
Specification for coconut fatty acids |
-
|
14500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1/3.1.1/3.2(Description - IS 12069:1987) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12069:1987) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (vi)(Ash - IS 12069:1987) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (ix)(Colour) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (x)(Lauric Acid Content - IS 548 (Part 3/Sec 1) : 2021) |
- |
2500 |
|
NA |
3.3, 6.1 Table 1 (xi)(Flash Point - IS 1448 (P-21)) |
- |
1000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
128 |
IS 12068 (1987) |
Specification for rice bran fatty acids |
-
|
14500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1/3.1.1/3.2(Description - IS 12068:1987) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (ix)(Colour) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
1000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
129 |
IS 12067 (1987) |
Specification for palm fatty acids |
-
|
13000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1/3.1.1/3.2(Description - IS 12067:1987) |
- |
500 |
|
NA |
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12067:1987) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (vi)(Ash - IS 12067:1987) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (ix)(Colour) |
- |
1000 |
|
NA |
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
1000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
130 |
IS 12029 (1986) |
Specification for acid oil |
-
|
15000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Acid Oil(Total Fatty Matter (TFM) - IS 286 : 2018) |
- |
2000 |
|
NA |
3.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018) |
- |
1500 |
|
NA |
3.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021) |
- |
2000 |
|
NA |
3.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:1986) |
- |
1500 |
|
NA |
3.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
2000 |
|
NA |
3.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:1986) |
- |
2000 |
|
NA |
3.2 Table 1 (vii)(Iron - IS 12029:1986) |
- |
1500 |
|
NA |
3.2 Table 1 (viii)(Ash - IS 12029:1986) |
- |
1500 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
131 |
IS 10931 (1984) |
Specification for lauric acid |
-
|
17500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1(Description - IS 10931:1984) |
- |
500 |
|
NA |
3.2, 6.1 (Table 1 (i))(Lauric Acid Content - IS 548 (Part 3/Sec 1) : 2021) |
- |
4000 |
|
NA |
3.2, 6.1 (Table 1 (ii))(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
NA |
3.2, 6.1 (Table 1 (iii))(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.2, 6.1 (Table 1 (iv))(Acid value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.2, 6.1 (Table 1 (v))(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.2, 6.1 (Table 1 (vi))(Mineral Acidity - IS 10931:1984) |
- |
1500 |
|
NA |
3.2, 6.1 (Table 1 (vii))(Ash - IS 10931:1984) |
- |
1500 |
|
NA |
3.2, 6.1 (Table 1 (viii))(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.2, 6.1 (Table 1 (ix))(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
NA |
3.2, 6.1 (Table 1 (x))(Colour) |
- |
1500 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
132 |
IS 1785 : Part 1 (1983) |
Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision) |
-
|
35000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl 5.1(Diameter) |
- |
300 |
|
Total testing charges are Rs. 35000/- (Including Relaxation) test.
Total testing charges are Rs. 35000/- (Including Relaxation test) for 1000 hrs.
Total testing charges are Rs. 10000/- (Including Relaxation test) for 100 hrs. |
Cl 6.3(Reverse Bend Test) |
- |
500 |
|
NA |
Cl 6.1(Tensile Test On UTM) |
- |
1000 |
|
NA |
Cl 6.2(Tensile Test On UTM) |
- |
0 |
|
NA |
Cl 6.4(Tensile Test On UTM) |
- |
800 |
|
NA |
Clause 3.3(Workmanship ) |
- |
200 |
|
NA |
Clause 3.4(Surface Finish) |
- |
200 |
|
NA |
Clause 3.5(Weld joints) |
- |
200 |
|
NA |
Clause 6.5(Relaxation stress(1000 h)) |
- |
30000 |
|
NA |
Clause 6.5.1(Relaxation stress(100 h)) |
- |
10000 |
|
Testing charges same as for 100 hours |
Clause 3.1.1(Sulphur) |
- |
350 |
|
NA |
Clause 3.1.1(Phosphorus) |
- |
350 |
|
NA |
Cl 6.4(Tensile Test On UTM) |
- |
300 |
|
Ductility testing charges are Rs. 800/- |
|
Complete
|
|
31 Dec, 2026 |
- |
133 |
IS 1806 (2018) |
Malted milk foods - Specification (Second Revision) |
-
|
9500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.3-Table 1- i(Moisture) |
- |
200 |
|
Rs-9500/- for Type-I
Rs-8900/- for Type-II |
4.3-Table 1- ii(Total protein (N × 6.25) (on dry basis),) |
- |
500 |
|
NA |
4.3-Table 1- iii(Total fat (on dry basis)) |
- |
500 |
|
NA |
4.3-Table 1- iv(Total ash (on dry basis)) |
- |
400 |
|
NA |
4.3-Table 1- v(Acid insoluble ash (on dry basis) (in dilute HCl)) |
- |
400 |
|
NA |
4.3-Table 1- vi(Solubility) |
- |
500 |
|
NA |
4.3-Table 1- vii(Cocoa powder (on dry basis)) |
- |
0 |
|
Records of addition to be maintained by manufacturers. |
4.3-Table 1- viii(Test for starch) |
- |
600 |
|
NA |
4.3-Table 1- ix(Bacterial count) |
- |
600 |
|
NA |
4.3-Table 1- x(Coliform count) |
- |
600 |
|
NA |
4.3-Table 1- xi(E. coli) |
- |
600 |
|
NA |
4.3-Table 1- xii(Yeast and mould count) |
- |
600 |
|
NA |
4.3-Table 1- xiii(Salmonella) |
- |
600 |
|
NA |
4.3-Table 1- xiv(Shigella) |
- |
600 |
|
NA |
4.3-Table 1- xv(Vibrio cholerae ) |
- |
600 |
|
NA |
4.3-Table 1- xv( V. parahaemolyticus) |
- |
600 |
|
NA |
4.3-Table 1- xvi(Faecal streptococci ) |
- |
600 |
|
NA |
4.3-Table 1- xvi( Staphylococcusaureas) |
- |
600 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
134 |
IS 9532 (1980) |
Specification for chakka and shrikhand |
-
|
6300 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1.2 (Appearance and Colours) |
- |
400 |
|
Chakka |
3.1.3(Odour and Flavour) |
- |
400 |
|
Chakka |
3.1.4(Texture and Consistency) |
- |
400 |
|
Chakka |
3.1.1 and 3.1.6 Table 1(Total solids, Chakka made from skimmed milk) |
- |
800 |
|
Chakka |
3.1.1 and 3.1.6 Table 1(Milk fat, Chakka) |
- |
800 |
|
Chakka |
3.1.1 and 3.1.6 Table 1(Milk protein, Chakka) |
- |
800 |
|
Chakka |
3.1.1 and 3.1.6 Table 1( Titratable acidity) |
- |
800 |
|
Chakka |
3.1.1 and 3.1.6 Table 1(Total ash, Chakka ) |
- |
800 |
|
Chakka |
3.1.1 and 3.1.6 Table 1(Coliform count) |
- |
800 |
|
Chakka |
3.1.1 and 3.1.6 Table 1(Yeast and mould count) |
- |
800 |
|
Chakka |
3.2.2 (Appearance and Colours) |
- |
400 |
|
Shrikhand |
3.2.3(Odour and Flavour) |
- |
400 |
|
Shrikhand |
3.2.4(Texture and Consistency) |
- |
400 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2(Total solids) |
- |
800 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2(Milk fat) |
- |
800 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2(Milk protein) |
- |
800 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2( Titratable acidity) |
- |
800 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2(Sugar ( Sucrose )) |
- |
800 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2(Total ash) |
- |
800 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2(Coliform count) |
- |
800 |
|
Shrikhand |
3.2.1 and 3.2.6 Table 2(Yeast and mould count) |
- |
800 |
|
Rs 7600 /- for Shrikhand and
Rs 6800/- for Chakka |
|
Complete
|
|
31 Dec, 2026 |
- |
135 |
IS 2802 (1964) |
Specification for ice-cream |
-
|
7900 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1(Odour and Flavour) |
- |
500 |
|
NA |
3.2(Texture and Appearance) |
- |
500 |
|
NA |
3.3(Freedom from Dirt) |
- |
500 |
|
NA |
4.1 Table 1(weight in gram, ice cream) |
- |
800 |
|
NA |
4.1 Table 1(Total Solids) |
- |
800 |
|
NA |
4.1 Table 1(Milk Fat, ice cream) |
- |
800 |
|
NA |
4.1 Table 1(Acidity percent, ice cream only) |
- |
800 |
|
NA |
4.1 Table 1(Sucrose, all types) |
- |
800 |
|
NA |
4.1 Table 1(Phosphatase test of mix) |
- |
800 |
|
NA |
4.1 Table 1(Total Colony Count) |
- |
800 |
|
NA |
4.1 Table 1(Coliform Count) |
- |
800 |
|
NA |
6.1(Odour and Flavour-IS 2802:2022) |
- |
0 |
|
NA |
6.2(Texture and Appearance) |
- |
0 |
|
NA |
6.3(Freedom from Dirt) |
- |
0 |
|
NA |
6.5,Table(i)(Weight in grams- IS 2802:2022) |
- |
0 |
|
NA |
6.5,Table(ii)(Total Solids - IS 12333) |
- |
0 |
|
NA |
6.5,Table(iii)(Milk fat -IS 11762) |
- |
0 |
|
NA |
6.5,Table(iv)(Milk Protein-IS 11917) |
- |
0 |
|
NA |
6.5,Table(v)(Acidity -IS 1479 (Part-1)) |
- |
0 |
|
NA |
6.5,Table(vi)(Sucrose-IS 11764) |
- |
0 |
|
NA |
6.5,Table(vii)(Phosphatase test of mix-Is 8479(Part-1)) |
- |
0 |
|
NA |
6.5 Table:2(i)(Aerobic Plate count - IS 5402(P-2)) |
- |
0 |
|
NA |
3.1(Odour and Flavour) |
- |
0 |
|
NA |
Cl-4.1, Table 1, sl.no-i(Weight in grams) |
- |
0 |
|
NA |
Cl-4.1, Table 1, sl.no-ii(Total solids) |
- |
0 |
|
NA |
Cl-4.1, Table 1, sl.no-iii(Milk fat) |
- |
0 |
|
NA |
Cl-4.1, Table 1, sl.no-iv(Acidity) |
- |
0 |
|
NA |
Cl-4.1, Table 1, sl.no-v(Sucrose) |
- |
0 |
|
NA |
4.1 Table 1(Coliform Count) |
- |
0 |
|
NA |
4.1 Table 1(Phosphatase test of mix) |
- |
0 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
136 |
IS 5149 (2020) |
Specification for Maleic Anhydride, Technical ( Second Revision ) |
-
|
8300 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl.2.1(Description) |
- |
500 |
|
NA |
Cl.2.2, Table-1(i)(Crystallizing point) |
- |
1200 |
|
NA |
Cl.2.2, Table-1(ii)(Colour of the molten material) |
- |
1000 |
|
NA |
Cl.2.2, Table-1(iii)(Maleic acid content) |
- |
1800 |
|
NA |
Cl.2.2, Table-1(iv)(Maleic anhydride content) |
- |
1800 |
|
NA |
Cl.2.2, Table-1(v)(Ash) |
- |
1000 |
|
NA |
Cl.2.2, Table-1(vi)(Iron content (as Fe)) |
- |
1000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
137 |
IS 3564 (1995) |
Hydraulically Regulated Door Closers -Specification |
-
|
17000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6(Nominal Sizes) |
- |
950 |
|
NA |
B-1.2(a) Visual Inspection) |
- |
650 |
|
NA |
B-1.3(b) Surface) |
- |
250 |
|
NA |
B-1.4(c) Performance Requirements) |
- |
6900 |
|
NA |
B-1.5(d) Endurance Test) |
- |
4000 |
|
NA |
9(Finish) |
- |
450 |
|
na |
9(Finish) |
- |
0 |
|
Testing charges already mentioned above |
8(Essential Requirements) |
- |
0 |
|
Testing charges for Hydraulic Oil testing are Rs. 750/-
Testing charges for The nut/top lid assembly are Rs. 400 |
8(Essential Requirements) |
- |
0 |
|
NA |
8(Essential Requirements) |
- |
450 |
|
NA |
8(Essential Requirements) |
- |
0 |
|
NA |
8(Essential Requirements) |
- |
0 |
|
NA |
8(Essential Requirements) |
- |
0 |
|
NA |
8(Essential Requirements) |
- |
0 |
|
NA |
8(Essential Requirements) |
- |
0 |
|
NA |
8(Essential Requirements) |
- |
600 |
|
NA |
Cl. 7 Table 2(Materials) |
- |
450 |
|
NA |
Clause 7 (Table 2 - ii)(Material for Torsion spring helical spring) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - iii)(Material for Nuts) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - iv)(Material for Piston or Rack-piston/pinion) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - v)(Material for Material for Packing/washers) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - vi)(Material for Control valve screw) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - vii)(Material for All weather resistant homogeneous high viscosity hydraulic) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - viii)(Material for Adjusting arm) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - ix)(Material for Main arm ) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - x)(Material for Clamp) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - xi)(Material for Concentric ratchet ( For bottle type ) ) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - xii)(Material for Material for Eccentric shaft ) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - xiii)(Material for Internal bearing and gland ) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - xiv)(Material for Main arm bolt) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - xv)(Material for Top nut) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - xvi)(Material for Pawl) |
- |
0 |
|
Testing charges already mentioned above |
Clause 7 (Table 2 - xvii)(Material for Top lid) |
- |
0 |
|
Testing charges already mentioned above |
8(Essential Requirements) |
- |
500 |
|
NA |
8(Essential Requirements) |
- |
650 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
138 |
IS 1786 (2008) |
High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision) |
-
|
18000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl. 7.2 Table -2 (Nominal Mass) |
- |
400 |
|
Total testing charges are Rs. 18000/- including Pull Out test
Testing charges for Pull Out test only Rs. 8000/- |
Cl. 8.1 Table 3(Tensile Strength (TS)) |
- |
500 |
|
Testing charges for Freedom from defects are Rs. 200/- |
Cl. 8.1 Table 3(Elongation, percentage) |
- |
500 |
|
NA |
Cl. 8.1 Table 3(TS/YS ratio) |
- |
500 |
|
NA |
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), ) |
- |
700 |
|
NA |
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar)) |
- |
0 |
|
Testing charges already mentioned above at Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar) i.e. Rs. 700/- |
Cl. 6.1(Nominal Size) |
- |
200 |
|
NA |
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON ) |
- |
300 |
|
Testing charges for Carbon content. |
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR) |
- |
300 |
|
NA |
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS) |
- |
300 |
|
NA |
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN) |
- |
300 |
|
NA |
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE) |
- |
300 |
|
NA |
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR) |
- |
0 |
|
NA |
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT ) |
- |
0 |
|
NA |
Cl 5(Deformations and Surface Characteristics) |
- |
0 |
|
Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/- |
Cl 5(Deformations and Surface Characteristics) |
- |
0 |
|
Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/- |
Cl 5(Deformations and Surface Characteristics) |
- |
0 |
|
Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/- |
Cl. 8.1 Table 3(Yield Stress (YS)) |
- |
500 |
|
NA |
Cl. 9.3, Table 4(Bend Test ) |
- |
500 |
|
NA |
Clause 9.4(Rebend Test) |
- |
500 |
|
NA |
Clause 6.3(Effective Cross-sectional Area) |
- |
500 |
|
NA |
Clause 8.1(Table 3)(Total Elongation at Maximum Force) |
- |
500 |
|
NA |
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs) |
- |
0 |
|
Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/- |
4.1(Ni) |
- |
300 |
|
NA |
4.1(Mo) |
- |
300 |
|
NA |
4.1(Cr) |
- |
300 |
|
NA |
4.1( Ti) |
- |
300 |
|
NA |
4.1(V) |
- |
300 |
|
NA |
4.1( Nb) |
- |
300 |
|
NA |
4.1( Copper %) |
- |
300 |
|
NA |
4.2(Boron (B)) |
- |
300 |
|
NA |
4.1( Aluminium %) |
- |
300 |
|
NA |
4.1(Sulphur and phosphorous) |
- |
0 |
|
NA |
4.1(Silicon %) |
- |
300 |
|
NA |
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
0 |
|
NA |
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
0 |
|
NA |
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
0 |
|
NA |
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
0 |
|
NA |
4.2(Niobium (Nb)) |
- |
0 |
|
NA |
5.7(Pull-out test - IS:2770(P1)) |
- |
8000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
139 |
IS 12299 (1998) |
Dairy whitener - Specification (First Revision) |
-
|
5600 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Description) |
- |
100 |
|
NA |
5.3(Flavour and Taste) |
- |
100 |
|
Including Cl 5.1- Extraneous Matter, Added Colour & Flavour |
5.6 Table 1 i)(Moisture) |
- |
350 |
|
NA |
5.6 Table 1 ii)(Milk Solids (non-fat)) |
- |
350 |
|
NA |
5.6 Table 1 iii)(Insolubility Index) |
- |
350 |
|
NA |
5.6 Table 1 iv)(Total Ash (on dry basis)) |
- |
400 |
|
NA |
5.6 Table 1 vi)(Acid Insoluble ash) |
- |
400 |
|
NA |
5.6 Table 1 vii)(Total added sugar) |
- |
500 |
|
NA |
5.6 Table 1 v)(Milk Fat) |
- |
350 |
|
NA |
5.5.1(Bacterial Count) |
- |
500 |
|
NA |
5.5.2(Coliform Count) |
- |
500 |
|
NA |
5.5.2(E Coli) |
- |
700 |
|
NA |
5.5.2(Staphylococcus aureus) |
- |
700 |
|
NA |
5.5.3(Salmonella) |
- |
500 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
140 |
IS 5295 (2021) |
Ethylene Glycol - Specification (Second Revision) |
-
|
19150 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.2, Table 1(Colour, Hazen units/Pt-Co, Max) |
- |
650 |
|
Total testing charges for Fiber Grade are Rs. 19150/-
Total testing charges for General Grade Rs. 10850/- |
4.2, Table 1(Relative density1) at 20/20 °C) |
- |
1000 |
|
NA |
4.2, Table 1(Distillation range at 760 mm Hg (a) Initial boiling point, °C Min) |
- |
3500 |
|
NA |
4.2 (Chem)(Distillation range at 760 mm Hg (b) The temperature at which 95 ml of
material shall distil, °C, Max) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 3500/- |
4.2, Table 1(Moisture content, percent by mass, Max) |
- |
900 |
|
NA |
4.2, Table 1(Acidity (as acetic acid), ppm, Max) |
- |
900 |
|
NA |
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min) |
- |
2500 |
|
NA |
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at b) 275 nm, Min) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 2500/- |
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at c) 350 nm, Min) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 2500/- |
4.2, Table 1(Freezing point of equal volumes of material
and water, Max) |
- |
1000 |
|
NA |
4.2, Table 1(Iron content, ppm, Max) |
- |
1600 |
|
NA |
4.2, Table 1(Chlorides content (as Cl), ppm, Max) |
- |
1600 |
|
NA |
4.2, Table 1(Diethylene glycol content, ppm, Max) |
- |
1600 |
|
NA |
4.2, Table 1(Purity, percent, Min) |
- |
2500 |
|
NA |
4.2, Table 1(Aldehyde as CH3CHO or HCHO, ppm, Max) |
- |
2000 |
|
NA |
4.1(Description) |
- |
400 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
141 |
IS 15609 (2005) |
Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification |
-
|
14900 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour) |
- |
1000 |
|
NA |
6.1.7 IS: 9845:1998(Migration- b. Colour migration) |
- |
1000 |
|
NA |
6.1.4(Odour) |
- |
100 |
|
NA |
6.1.1(Description) |
- |
200 |
|
NA |
6.1.2(Film Form) |
- |
100 |
|
NA |
6.1.3(Winding of the Film ) |
- |
100 |
|
NA |
6.1.5 A-2 of IS: 2508:2016(Thickness) |
- |
200 |
|
NA |
6.1.6(Width) |
- |
200 |
|
NA |
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction) |
- |
500 |
|
NA |
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction) |
- |
500 |
|
NA |
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction) |
- |
325 |
|
NA |
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction) |
- |
325 |
|
NA |
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance) |
- |
450 |
|
NA |
7.2 Annex F(Stack Load test) |
- |
500 |
|
NA |
7.3 Annex G(Drop test ) |
- |
500 |
|
NA |
7.4 Annex H(Ink adhesion test for printed pouches) |
- |
400 |
|
NA |
7.5 Annex J(Product resistance test for printed pouches) |
- |
500 |
|
NA |
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive ) |
- |
0 |
|
Already add in parameter |
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour) |
- |
0 |
|
Already add in parameter |
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium) |
- |
800 |
|
NA |
Table 3(ii) Cobalt) |
- |
800 |
|
NA |
Table 3(iii) Copper) |
- |
800 |
|
NA |
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron) |
- |
800 |
|
NA |
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium) |
- |
800 |
|
NA |
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese) |
- |
800 |
|
NA |
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc) |
- |
800 |
|
NA |
CL 6.1.11.2 and 6.1.11.3, Table 3 (viii)(Antimony) |
- |
800 |
|
NA |
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP)) |
- |
1600 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
142 |
IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
-
|
10600 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1.1(Appearance) |
- |
200 |
|
Total testing charges are Rs. 10600/- excluding Raw material. |
5.1.2(Film Form) |
- |
200 |
|
NA |
5.1.3(Odour) |
- |
200 |
|
NA |
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1)) |
- |
500 |
|
NA |
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
500 |
|
NA |
5.1.6a(Carbon Black Content, Annex-A) |
- |
500 |
|
NA |
5.1.6b(Ash Content, Annex-A) |
- |
500 |
|
NA |
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
500 |
|
NA |
5.2.2(Tolerance on Thickness, Annex-A) |
- |
300 |
|
NA |
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1000 |
|
NA |
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1000/- |
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
500 |
|
NA |
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 500/- |
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) ) |
- |
700 |
|
NA |
6.1, Table 1(Tear resistence. A) Machine direction Annex B) |
- |
700 |
|
NA |
6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 700/- |
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1000/- |
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1000/- |
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 500/- |
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 500/- |
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 700/- |
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
500 |
|
NA |
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
500 |
|
NA |
8.1, Table 3(Tear resistance , Annex B) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 700/- |
8.1, Table 3(Puncture resistance , Annex C) |
- |
500 |
|
NA |
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
500 |
|
NA |
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 500/- |
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
500 |
|
NA |
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 500/- |
9.1, Table 4(Tear resistance , Annex B) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 700/- |
9.1, Table 4(Puncture resistance , Annex C) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 700/- |
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
1500 |
|
NA |
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1500/- |
Clause 5.2.3(Tolerance on Width) |
- |
300 |
|
NA |
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction)) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1500/- |
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction)) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1500/- |
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction)) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1500/- |
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction)) |
- |
0 |
|
Testing charges already mentioned above i.e. Rs. 1500/- |
|
Complete
|
|
31 Dec, 2026 |
- |
143 |
IS 269 (2015) |
Ordinary portland cement - Specification (Sixth Revision) |
-
|
13500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
7 Table-3 ii a(Expansion by Le Chatelier) |
- |
600 |
|
Total testing charges excluding Optional test (Transverse strength) are Rs. 13500/-
Testing charges for Optional test only (Transverse strength) Rs. 5000/- |
7 Table-3 ii b(Expansion by Autoclave) |
- |
1000 |
|
Testing charges for Performance improver are Rs. 1500/- |
7 Table-3 iii a(Setting Time Initial) |
- |
500 |
|
NA |
7 Table-3 iii b(Setting Time Final) |
- |
500 |
|
NA |
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
2000 |
|
NA |
6.1 Table-2 viii(Alkali content) |
- |
600 |
|
NA |
6.1 Table-2 vii(Chloride content) |
- |
600 |
|
NA |
6.1 Table-2 vi(Loss on ignition) |
- |
600 |
|
NA |
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride) |
- |
600 |
|
NA |
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide) |
- |
600 |
|
NA |
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
- |
1800 |
|
NA |
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985) |
- |
600 |
|
OK |
6.1 Table-2 iii.(Insoluble residue) |
- |
600 |
|
NA |
7 Table-3 i.(Fineness) |
- |
800 |
|
NA |
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
5000 |
|
NA |
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
0 |
|
Testing charges already mentioned above |
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
0 |
|
Testing charges already mentioned above |
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
0 |
|
Testing charges already mentioned above |
|
Complete
|
|
31 Dec, 2026 |
- |
144 |
IS 5405 (2019) |
Sanitary napkins – Specification (second revision) |
-
|
27950 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes) |
- |
700 |
|
OK |
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B) |
- |
1200 |
|
OK |
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1)) |
- |
6000 |
|
OK |
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus
Aureus, 7.3.2.1, IS 5887 (Part 2)) |
- |
6000 |
|
OK |
6.0(Manufacture, workmanship & finish) |
- |
500 |
|
OK |
Cl 7.5(Biodegradability and Compostability
(Optional), IS/ISO 17088.) |
- |
12000 |
|
ok |
Cl 5(SIZES, Regular ) |
- |
1550 |
|
Rs. 1550/- for dimensions of all sizes |
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1)) |
- |
6000 |
|
OK |
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity,
Irritation and Skin Sensitization, IS/ISO 10993 Part 5
and IS/ISO 10993 Part 10) |
- |
240000 |
|
Rs. 2,67,950/- Including Biocompatibility Evaluation – Cytotoxicity, Irritation & Skin Sensitization (as per cl. no. 7.4).
&
Rs. 27,950/- Excluding Biocompatibility Evaluation – Cytotoxicity, Irritation & Skin Sensitization (as per cl. no. 7.4). |
|
Complete
|
|
31 Dec, 2026 |
- |
145 |
IS 170 (2020) |
Acetone — Specification ( Fifth Revision ) |
-
|
12000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Cl No 3.1( Description) |
- |
400 |
|
NA |
Cl No 3.2(Miscibility with Water) |
- |
500 |
|
NA |
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity) |
- |
2000 |
|
NA |
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour) |
- |
800 |
|
NA |
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C) |
- |
800 |
|
NA |
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range) |
- |
800 |
|
NA |
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content) |
- |
1000 |
|
NA |
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation) |
- |
800 |
|
NA |
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),) |
- |
800 |
|
NA |
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity) |
- |
800 |
|
NA |
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test) |
- |
800 |
|
NA |
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities) |
- |
500 |
|
NA |
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content) |
- |
1000 |
|
NA |
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content) |
- |
1000 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
146 |
IS 16232 (2014) |
Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification |
-
|
9500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
3.1(Description - Iron fortified iodized salt (Double fortified salt) shall
be crushed crystalline solid; white or pale pink or light
grey in colour, free from contamination with clay and
other extraneous adulterants and impurities) |
- |
400 |
|
NA |
3.2(Salt used for manufacture of double fortified salt - sodium chloride content on dry weight basis for double fortified salt manufactured by fortification with encapsulated ferrous fumarate - A-5 of IS 253) |
- |
750 |
|
NA |
3.3(material shall pass through 4.00 mm IS sieve) |
- |
400 |
|
NA |
3.4 - Table 1 - i(Moisture - Annex A of IS 7224) |
- |
500 |
|
NA |
3.4 - Table 1 - ii(Water insoluble matter, on dry basis - A-4 of IS 253
) |
- |
500 |
|
NA |
3.4 - Table 1 - iii(Chloride content (as NaCl), on dry basis - A-4 of IS 253) |
- |
750 |
|
NA |
3.4 - Table 1 - iv(Matter insoluble in dilute HCl, on dry basis - Annex G) |
- |
500 |
|
NA |
3.4 - Table 1 - v(Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253) |
- |
500 |
|
NA |
3.4 - Table 1 - vi(Iron content (as Fe) - Annex A) |
- |
1000 |
|
NA |
3.4 - Table 1 - vii- a(Iodine content, Manufacturer’s level - Annex B) |
- |
750 |
|
NA |
3.4 - Table 1 - viii - a(pH of 5 percent aqueous solution : For iron fortification through
encapsulated ferrous fumarate - Annex C) |
- |
450 |
|
NA |
3.4 - Table 1 - ix(Sulphate (as SO4) - A-8 of IS 253) |
- |
750 |
|
NA |
3.4 - Table 1 - xi - a(Phosphorous (as P2O5) - For iron fortification through
encapsulated ferrous fumarate - Annex D) |
- |
750 |
|
NA |
3.4 - Table 1 - xii(Sodium hexa meta phosphate, on dry basis - Annex E) |
- |
750 |
|
NA |
3.4 - Table 1 - x(Magnesium (as Mg), water soluble - A-7 of IS 253) |
- |
750 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
147 |
IS 14542 (1998) |
Partly skimmed milk powder specification |
-
|
6000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Table 1(i)(Moisture Type I (IS 11623)) |
- |
800 |
|
Rs 250/- for Description (Cl 5.1) only,
Rs 250/- for Flavour and taste (Cl 6.4). |
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623)) |
- |
500 |
|
NA |
Table 1(iii)(Milk fat, Type I (IS I1722)) |
- |
500 |
|
NA |
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759)) |
- |
500 |
|
NA |
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759)) |
- |
0 |
|
As above |
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1)) |
- |
800 |
|
NA |
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766)) |
- |
800 |
|
NA |
Cl 6.6.1(Bacterial Count (IS 5402)) |
- |
800 |
|
NA |
Cl 6.6.2(Coliform Count ((IS 5402)) |
- |
800 |
|
NA |
Table 1(i)(Moisture Type II (IS 11623)) |
- |
0 |
|
As above |
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623)) |
- |
0 |
|
As above |
Table 1(iii)(Milk fat, Type II (IS I1722)) |
- |
0 |
|
As above |
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759)) |
- |
0 |
|
As above |
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759)) |
- |
0 |
|
As above |
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1)) |
- |
0 |
|
As above |
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766)) |
- |
0 |
|
As above |
|
Complete
|
|
31 Dec, 2026 |
- |
148 |
IS 16326 (2015) |
Ghee - Specification |
-
|
12400 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.1.1(Texture) |
- |
200 |
|
NA |
4.1.2(Colour) |
- |
200 |
|
NA |
4.1.3(Odour and taste) |
- |
400 |
|
NA |
4.1.9, Table 1(Milk fat) |
- |
500 |
|
NA |
4.1.7(Baudouin test) |
- |
1000 |
|
NA |
4.1.6(Phenolphthalein test) |
- |
1000 |
|
NA |
4.1.6(tests for the presence of animal fats (other than milk fats)) |
- |
2000 |
|
Including phytosterol acetate test |
4.1.9, Table 1(Peroxide value) |
- |
1000 |
|
NA |
4.1.10(Butyro-Refractometer reading at 40°C) |
- |
800 |
|
NA |
4.1.10(Reichert Meissl value) |
- |
800 |
|
NA |
4.1.10( Polenske value) |
- |
800 |
|
NA |
4.11.1, Table 3(Free fatty acid as oleic acid) |
- |
1500 |
|
NA |
4.11.1, Table 3(Moisture) |
- |
800 |
|
NA |
4.1.9, Table 1(Coliform) |
- |
1000 |
|
NA |
4.1.4(Excess Moisture) |
- |
400 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
149 |
IS 7839 (1975) |
Specification for dried ice-cream mix |
-
|
6900 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Table-1(Moisture, percent by mass, max) |
- |
800 |
|
NA |
Table-1(Milk fat, percent by mass, min) |
- |
800 |
|
NA |
Table-1(Sucrose, percent by mass, MU) |
- |
800 |
|
NA |
Table-1(Titratable acidity (as lactic
acid), percent by mass, Max) |
- |
800 |
|
NA |
Table-1(Solubility index, Max) |
- |
800 |
|
NA |
Table-1(Milk proteins, percent by mass,min) |
- |
800 |
|
NA |
Table-1(Bacterial count per gram, Max) |
- |
800 |
|
NA |
Table-1(Coliform count per gram, Max) |
- |
800 |
|
NA |
3.2(Description) |
- |
500 |
|
NA |
3.5 Table 1 (i)(Moisture - IS 11623 / 16072) |
- |
0 |
|
As above |
3.5 Table 1 (ii)(Milk Fat - IS 11721 OR 12249 ( part 2)) |
- |
0 |
|
As above |
3.5 Table 1 (iii)(Sucrose -Annex c of IS 2802 or 11764) |
- |
0 |
|
As above |
3.5 Table 1 (iv)(Titratable acidity (as lactic acid) IS 11765) |
- |
0 |
|
As above |
3.5 Table 1 (v)(Solubility index IS 12759) |
- |
0 |
|
As above |
3.5 Table 1 (vi)(Milk Proteins IS 11917) |
- |
0 |
|
As above |
3.5 Table:2(ii)(Coliform count - IS 5401(P-1)) |
- |
0 |
|
As above |
3.5 Table:2(i)(Aerobic Plate count - IS 5402(P-1)) |
- |
0 |
|
As above |
3.5Table:2(iii)(S.aureus - IS 5887(P-8/Sec-1):2002) |
- |
0 |
|
NA |
3.5Table:2(iv)(Yeast & Mould count - IS 5403:1999) |
- |
0 |
|
NA |
3.5 Table:2(v)(Salmonella sp.- IS 5887(P-3/Sec-1):2020) |
- |
0 |
|
NA |
3.5 Table:2(vi)(L.monocytogenes - IS 14988(P-1):2020) |
- |
0 |
|
NA |
3.5 Table:2(vii)(B.cereus - IS 5887(P-6):2012) |
- |
0 |
|
NA |
3.5 Table:2(viii)(Sulphite reducing clostridia - ISO 15213:2003) |
- |
0 |
|
NA |
3.5 Table:2(ix)(E.coli- IS 5887(P-1):1976) |
- |
0 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |
150 |
IS 5550 (1970) |
Specification for burfi |
-
|
6600 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
Table-1(Moisture, percent by mass, Max) |
- |
800 |
|
NA |
Table-1(fat, by mass,min) |
- |
800 |
|
NA |
Table-1(lactose, min) |
- |
800 |
|
NA |
Table-1(sucrose, min) |
- |
800 |
|
NA |
Table-1(acidity, max (lactic acid)) |
- |
800 |
|
NA |
Cl. 5.4 (Table 1, S. no vi)(Standard plate) |
- |
800 |
|
NA |
Table-1(yeast and mould count, max) |
- |
800 |
|
NA |
Cl. 5.1(Body and Texture) |
- |
500 |
|
NA |
Cl. 5.2(Colour and Flavour ) |
- |
500 |
|
NA |
|
Complete
|
|
31 Dec, 2026 |
- |