BIS - LIMS (Laboratory Information Management System)

IDMA LABORATORIES LIMITED, PANCHKULA

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List

Reset

486 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 6031 (2023)

Calcium Propionate Food Grade - Specification

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1("Description IS 6031 : 2023 ")	-	600	-
3.2.1("Identification Tests IS 6031 : 2023 ")	-	1500	Testing charges for Identification test as per Clause no. 3.2.1 , 3.2.2 , 3.2.3 are Rs. 1500/-
3.2.2("Identification Tests IS 6031 : 2023 ")	-	0	Testing charges for Identification test as per Clause no. 3.2.1 , 3.2.2 , 3.2.3 are Rs. 1500/- already mentioned above
3.2.3("Identification Tests IS 6031 : 2023 ")	-	0	Testing charges for Identification test as per Clause no. 3.2.1 , 3.2.2 , 3.2.3 are Rs. 1500/- already mentioned above
3.3("pH of the 10 percent (m/v) solution IS 6031 : 2023 ")	-	1500	-
3.4Table 1 (i)("Purity, as C₆H₁₀O₄Ca IS 6031 : 2023 ")	-	2400	-
3.4Table 1 (ii)("Moisture IS 6031 : 2023 ")	-	1500	-
3.4Table 1 (iii)("Matter insoluble in water IS 6031 : 2023 ")	-	1500	-
3.4Table 1 (iv)("Arsenic (as As) IS 1699 : 1995")	-	1000	-
3.4 Table 1 (v)(Lead (as Pb) IS 1699 : 1995)	-	1000	-
3.4 Table 1 (vi)("Iron (as Fe) IS 6031 : 2023 ")	-	1000	-
3.4 Table 1 (vii)("Fluoride IS 6031 : 2023 ")	-	1000	-
3.4 Table 1 (viii)("Magnesium (as MgO) IS 6031 : 2023 ")	-	1000	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 799 (2023)

AMMONIA LIQUOR SPECIFICATION

Technical Grade and Analytical Reagent Grade

16400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description ( IS 799 : 2023 ))	-	500	-
4.2Table 1 (i)(Ammonia ( IS 799 : 2023 ))	-	2000	-
4.2 Table 1 (ii)(Residue on evaporation ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (iii)(Carbonate (as CO₂) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (iv)(Chloride (as Cl) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (v)(Phosphate (as PO₄) ( IS 799 : 2023 ))	-	1200	-
4.2 Table 1 (vi)(Silicate (as SiO₂) ( IS 799 : 2023 ))	-	1200	-
4.2 Table 1 (vii)(Sulphate (as SO₄) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (viii)(Sulphide (as S) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (ix)(Arsenic (as As) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (x)(Calcium and magnesium (as Ca) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (xi)(Copper (as Cu) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (xii)(Iron (as Fe) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (xii)(Heavy metals (as Pb) ( IS 799 : 2023 ))	-	1000	-
4.2 Table 1 (xiv)(Reducing substances (as O) ( IS 799 : 2023 ))	-	500	-
4.2 Table 1 (xv)(Pyridine and homologues ( IS 799 : 2023 ))	-	1000	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 261 (2023)

COPPER SULPHATE SPECIFICATION

Technical and Pure

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description ( IS 261 : 2023))	-	500	-
4.2Table 1 (i)(Copper ( IS 261 : 2023))	-	1000	-
4.2 Table 1 (ii)(Matter insoluble in water ( IS 261 : 2023))	-	1000	-
4.2 Table 1 (iii)(Soluble iron and aluminium compounds (as Fe) ( IS 261 : 2023))	-	1000	-
4.2 Table 1 (iv)(pH value ( IS 261 : 2023))	-	1000	-
4.2 Table 1 (v)(Chloride (as Cl) ( IS 261 : 2023))	-	1000	-
4.2 Table 1 (vi)(Arsenic (as As₂O₃) ( IS 261 : 2023))	-	1000	-
4.2 Table 1 (vii)(Lead and zinc ( IS 261 : 2023))	-	1000	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 2142 (2023)

BROMINE TECHNICAL SPECIFICATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 2142:2023)	-	500	-
3.2. Table 1 (i)(Bromine - IS 2142:2023)	-	1500	-
3.2. Table 1 (ii)(Chlorine (as Cl) - IS 2142:2023)	-	1500	-
3.2. Table 1 (iii)(Non - volatile matter - IS 2142:2023)	-	1500	-
3.2. Table 1 (iv)(Iodine (as I) - IS 2142:2023)	-	1500	-
3.2. Table 1 (v)(Sulphates (as SO4) - IS 2142:2023)	-	1500	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 2923 (2024)

Carmoisine, food grade - Specification (Third Revision)

15300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 and 7 Table 1 (i)(Total dye content - IS 2923:2024)	-	1500	-
3.2 and 7 Table 1 (ii)(Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-	2000	-
3.2 and 7 Table 1 (iii)(Water Insoluble Matter- IS 1699:1995)	-	1000	-
3.2 and 7 Table 1 (iv)(Combined ether extracts- IS 1699:1995)	-	1500	-
3.2 and 7 Table 1 (v)(Subsidiary dyes- IS 2923:2024)	-	1500	-
3.2 and 7 Table 1 (vi)(Dye Intermediates- IS 2923:2024)	-	1500	-
3.2 and 7 Table 1 (vii)(Unsulphonated primary aromatic amines- IS 2923:2024)	-	1500	-
3.2 and 7 Table 1 (viii)(Lead - IS 1699)	-	800	-
3.2 and 7 Table 1 (ix)(Arsenic - IS 1699)	-	800	-
3.2 and 7 Table 1 (x)(Mercury - IS 1699)	-	800	-
3.2 and 7 Table 1 (xi)(Copper - IS 1699)	-	800	-
3.2 and 7 Table 1 (xii)(Chromium - IS 1699)	-	800	-
3.2 and 7 Table 1 (xiii)(Cadmium - IS 1699)	-	800	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 5287 (2024)

ALCOHOLIC DRINKS COUNTRY SPIRIT DISTILLED SPECIFICATION

Plain; Blended ;Spiced country spirit

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Ethanol content at 20 °C - IS 3752: 2005)	-	1500	-
5.2(Freedom from sedimentation and harmful ingredients- IS 5287:2024)	-	1000	Testing charges for Clause no. 5.2 Freedom from sedimentation and harmful ingredients, Clause no. 5.2.1 free from sediments and suspended matter and Clause no. 5.2.2. free from Psychotrotic substances are Rs. 1000/-
5.2.1(Country Spirits shall be free from sediments and suspended matter- IS 5287:2024)	-	0	Testing charges for Clause no. 5.2 Freedom from sedimentation and harmful ingredients, Clause no. 5.2.1 free from sediments and suspended matter and Clause no. 5.2.2. free from Psychotrotic substances are Rs. 1000/- already mentioned above
5.2.2(Country Spirits shall be free from psychotropic substances such as chloral hydrate and paraldehyde- Annex B of IS 5287:2024)	-	0	Testing charges for Clause no. 5.2 Freedom from sedimentation and harmful ingredients, Clause no. 5.2.1 free from sediments and suspended matter and Clause no. 5.2.2. free from Psychotrotic substances are Rs. 1000/- already mentioned above
5.4(Taste and Aroma- IS 5287:2024)	-	500	-
5.7 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	1000	-
5.7 Table 1 (ii)(Volatile acids as acetic acid- 7 of IS 3752: 2005)	-	1000	-
5.7 Table 1 (iii)(Esters as ethyl acetate- 8 of IS 3752: 2005)	-	1500	-
5.7 Table 1 (iv)(Higher alcohols as amyl alcohol- 10 of IS 3752: 2005)	-	1500	-
5.7 Table 1 (v)(Aldehydes as acetaldehyde-11 of IS 3752: 2005)	-	1500	-
5.7 Table 1 (vi)(Furfural- 12 of IS 3752: 2005)	-	1000	-
5.7 Table 1 (viii)(Methyl Alcohol -16 of IS 3752: 2006)	-	1000	-
5.7 Table 1 (ix)(Copper - 15 of IS 3752:2005)	-	900	-
5.7 Table 1 (x)(Arsenic - Annex C of IS 5286:2024)	-	900	-
5.7 Table 1 (xi)(Cadmium - Annex C of IS 5286:2024)	-	900	-
5.7 Table 1 (xii)(Lead - Annex C of IS 5286:2024)	-	900	-
5.7 Table 1 (xiii)(Mercury - Annex C of IS 5286:2024)	-	900	-
5.7 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (ii)(Volatile acids as acetic acid- 7 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (iii)(Esters as ethyl acetate- 8 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (iv)(Higher alcohols as amyl alcohol- 10 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (v)(Aldehydes as acetaldehyde-11 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (vi)(Furfural- 12 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (viii)(Methyl Alcohol -16 of IS 3752: 2006)	-	0	Testing charges already mentioned above
5.7 Table 1 (ix)(Copper - 15 of IS 3752:2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (x)(Arsenic - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.7 Table 1 (xi)(Cadmium - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.7 Table 1 (xii)(Lead - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.7 Table 1 (xiii)(Mercury - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.7 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (ii)(Volatile acids as acetic acid- 7 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (iii)(Esters as ethyl acetate- 8 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (iv)(Higher alcohols as amyl alcohol- 10 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (v)(Aldehydes as acetaldehyde-11 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (vi)(Furfural- 12 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (viii)(Methyl Alcohol -16 of IS 3752: 2006)	-	0	Testing charges already mentioned above
5.7 Table 1 (ix)(Copper - 15 of IS 3752:2005)	-	0	Testing charges already mentioned above
5.7 Table 1 (x)(Arsenic - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.7 Table 1 (xi)(Cadmium - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.7 Table 1 (xii)(Lead - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.7 Table 1 (xiii)(Mercury - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above

31 Dec, 2026

-
Included w.e.f 09.10.2024

IS 4449 (2024)

ALCOHOLIC DRINKS WHISKY SPECIFICATION

5 types

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Ethanol content at 20 °C - IS 3752: 2005)	-	1500	-
5.2(Freedom from sedimentation and harmful ingredients- IS 4449:2024)	-	0	-
5.2.1(Whiskies shall be free from sediments and suspended matter- IS 4449:2024)	-	1000	Testing charges for Clause no. 5.2.1 Freedom from sediments, suspended matter and Clause no. 5.2.2. freedom from Psychotrotic substances are Rs. 1000/-
5.2.2(Whiskies shall be free from psychotropic substances such as chloral hydrate and paraldehyde- Annex B of IS 4449:2024)	-	0	Testing charges for Clause no. 5.2.1 Freedom from sediments, suspended matter and Clause no. 5.2.2. freedom from Psychotrotic substances are Rs. 1000/- already mentioned above
5.4(Taste and Aroma- IS 4449:2024)	-	500	-
5.8 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (ii)(Volatile acids as acetic acid- 8 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (iii)(Esters as ethyl acetate- 10 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (iv)(Higher alcohols as amyl alcohol- 11 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (v)(Aldehydes as acetaldehyde-12 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (vi)(Furfural- 13 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (vii)(Methyl Alcohol -16 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (viii)(Copper - 15 of IS 3752:2005)	-	900	-
5.8 Table 1 (ix)(Arsenic - Annex C of IS 5286:2024)	-	900	-
5.8 Table 1 (x)(Cadmium - Annex C of IS 5286:2024)	-	900	-
5.8 Table 1 (xi)(Lead - Annex C of IS 5286:2024)	-	900	-
5.8 Table 1 (xii)(Mercury - Annex C of IS 5286:2024)	-	900	-

31 Dec, 2026

-
Included w.e.f 09.10.2024

IS 4100 (2024)

ALCOHOLIC DRINKS GIN SPECIFICATION

Gin/Premix

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Ethanol content at 20 °C - IS 3752: 2005)	-	1500	-
5.2(Freedom from sedimentation and harmful ingredients- IS 4100:2024)	-	0	NA
5.2.1(Gins shall be free from sediments and suspended matter- IS 4100:2024)	-	1000	Testing charges for Clause no. 5.2.1 Freedom from sediments, suspended matter and Clause no. 5.2.2. freedom from Psychotrotic substances are Rs. 1000/-
5.2.2(Gins shall be free from psychotropic substances such as chloral hydrate and paraldehyde- Annex B of IS 4100:2024)	-	0	Testing charges for Clause no. 5.2.1 Freedom from sediments, suspended matter and Clause no. 5.2.2. freedom from Psychotrotic substances are Rs. 1000/- already mentioned above
5.4(Appearance- IS 4100:2024)	-	500	-
5.5(Taste and Aroma- IS 4100:2024)	-	500	-
5.8 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (ii)(Volatile acids as acetic acid- 8 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (iii)(Esters as ethyl acetate- 10 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (iv)(Higher alcohols as amyl alcohol- 11 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (v)(Aldehydes as acetaldehyde-12 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (vi)(Copper - 15 of IS 3752:2005)	-	1000	-
5.8 Table 1 (vii)(Methyl Alcohol -16 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (viii)(Furfural- 13 of IS 3752: 2005)	-	800	-
5.8 Table 1 (ix)(Arsenic - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (x)(Cadmium - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (xi)(Lead - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (xii)(Mercury - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (ii)(Volatile acids as acetic acid- 8 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (iii)(Esters as ethyl acetate- 10 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (iv)(Higher alcohols as amyl alcohol- 11 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (v)(Aldehydes as acetaldehyde-12 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (vi)(Copper - 15 of IS 3752:2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (vii)(Methyl Alcohol -16 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (viii)(Furfural- 13 of IS 3752: 2005)	-	0	Testing charges already mentioned above
5.8 Table 1 (ix)(Arsenic - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.8 Table 1 (x)(Cadmium - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.8 Table 1 (xi)(Lead - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above
5.8 Table 1 (xii)(Mercury - Annex C of IS 5286:2024)	-	0	Testing charges already mentioned above

31 Dec, 2026

-
Included w.e.f 09.10.2024

IS 3811 (2024)

ALCOHOLIC DRINKS RUM SPECIFICATION

Rum/ White Rum/ Premix

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Ethanol content at 20 °C - IS 3752: 2005)	-	1500	-
5.2(Freedom from sedimentation and harmful ingredients- IS 3811:2024)	-	0	NA
5.2.1(Rums shall be free from sediments and suspended matter- IS 3811:2024)	-	1000	Testing charges for freedom from sediments and suspended matter and freedom from psychotropic substances such as chloral hydrate and paraldehyde are Rs 1000/-
5.2.2(Rums shall be free from psychotropic substances such as chloral hydrate and paraldehyde- Annex B of IS 3811:2024)	-	0	Testing charges for freedom from sediments and suspended matter and freedom from psychotropic substances such as chloral hydrate and paraldehyde are Rs 1000/- already mentioned above
5.3(Colour and Additives- IS 3811:2024)	-	500	-
5.4(Taste and Aroma- IS 3811:2024)	-	500	-
5.8 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (ii)(Volatile acids as acetic acid- 8 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (iii)(Esters as ethyl acetate- 10 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (iv)(Higher alcohols as amyl alcohol- 11 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (v)(Aldehydes as acetaldehyde-12 of IS 3752: 2005)	-	1500	-
5.8 Table 1 (vi)(Furfural- 13 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (vii)(Methyl Alcohol -16 of IS 3752: 2005)	-	1000	-
5.8 Table 1 (viii)(Copper-15 of IS 3752: 2005)	-	800	-
5.8 Table 1 (ix)(Arsenic - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (x)(Cadmium - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (xi)(Lead - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (xii)(Mercury - Annex C of IS 5286:2024)	-	800	-
5.8 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (ii)(Volatile acids as acetic acid- 8 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (iii)(Esters as ethyl acetate- 10 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (iv)(Higher alcohols as amyl alcohol- 11 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (v)(Aldehydes as acetaldehyde-12 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (vi)(Furfural- 13 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (vii)(Methyl Alcohol -16 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (viii)(Copper-15 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (ix)(Arsenic - Annex C of IS 5286:2024)	-	0	Already listed above
5.8 Table 1 (ix)(Arsenic - Annex C of IS 5286:2024)	-	0	Already listed above
5.8 Table 1 (x)(Cadmium - Annex C of IS 5286:2024)	-	0	Already listed above
5.8 Table 1 (xi)(Lead - Annex C of IS 5286:2024)	-	0	Already listed above
5.8 Table 1 (xii)(Mercury - Annex C of IS 5286:2024)	-	0	Already listed above
5.8 Table 1 (i)(Residue on evaporation- 5 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (ii)(Volatile acids as acetic acid- 8 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (iii)(Esters as ethyl acetate- 10 of IS 3752: 2005)	-	0	Already listed above
5.8 Table 1 (iv)(Higher alcohols as amyl alcohol- 11 of IS 3752: 2005)	-	0	Already listed above

31 Dec, 2026

-
Included w.e.f 09.10.2024

100

IS 14552 (2024)

Thiophanate methyl wettable powders - Specification (first revision)

12300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description - IS 14552:2024)	-	800	-
3.3, Table 1 (i)(Thiophanate Methyl Content - IS 14551:1998)	-	3500	-
3.3, Table 1 (ii)(Material passing through 75 micron IS sieve - IS 6940:1982)	-	1500	-
3.3, Table 1 (iii)(Suspensibility - IS 6940:1982)	-	4500	-
3.3, Table 1 (iv)(Acidity as (H2SO4) - IS 6940:1982)	-	1000	Testing charges for Acidity (as H2SO4) / Alkalinity (as NaOH) are Rs. 1000/-
3.3, Table 1 (iv)(Alkalinity (as NaOH) - IS 6940:1982)	-	0	Testing charges for Acidity (as H2SO4) / Alkalinity (as NaOH) are Rs. 1000/- are already mentioned above.
3.3, Table 1 (v)(Wettability - IS 6940:1982)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

101

IS 14186 (2024)

Diflubenzuron wettable powder WP - Specification First Revision

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description - IS 14186:2024)	-	1000	-
3.3, 7.1 Table 1 (i)(Diflubenzuron Content - IS 14185:2024)	-	4000	-
3.3, 7.1Table 1 (ii)(Material passing through 44 micron IS sieve - IS 6940:1982)	-	2000	-
3.3, 7.1 Table 1 (iii)(Suspensibility - IS 6940:1982)	-	5000	-
3.3, 7.1 Table 1 (iv)(Acidity (as H2SO4) - IS 6940:1982)	-	1000	-
3.3, 7.1 Table 1 (v)(Wettability - IS 6940:1982)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

102

IS 12932 (2024)

Atrazine, technical - Specification (first revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 12932:2024)	-	500	-
3.2, 7.1 Table 1 (i)(Atrazine Content - IS 12932:2024)	-	2500	-
3.2, 7.1 Table 1 (ii)(Ionic Chloride content - IS 12932:2024)	-	1500	-
3.2, 7.1 Table 1 (iii)(Moisture - IS 6940:1982)	-	1000	-
3.2, 7.1 Table 1 (iv)(Melting Point - IS 6940:1982)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

103

IS 12931 (2024)

Atrazine wettable powder WP - Specification First Revision

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description - IS 12931:2024)	-	500	-
3.3, Table 1 (i)(Atrazine Content - IS 12932:2024)	-	1500	-
3.3, Table 1 (ii)(Material passing through 75 micron IS sieve - IS 6940:1982)	-	800	-
3.3, Table 1 (iii)(Suspensibility - IS 6940:1982)	-	2000	-
3.3, Table 1 (iv)(Acidity (as H2SO4) - IS 6940:1982)	-	800	Testing charges for Acidity (as H2SO4) / Alkalinity (as NaOH) are Rs. 800/- .
3.3, Table 1 (iv)(Alkalinity (as NaOH) - IS 6940:1982)	-	0	Testing charges for Acidity (as H2SO4) / Alkalinity (as NaOH) are Rs. 800/- already mentioned above.
3.3, Table 1 (v)(Wettability - IS 6940:1982)	-	800	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

104

IS 9360 (2024)

Carbofuran granules, encapsulated - Specification (first revision)

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description - IS 9360:2024)	-	500	-
3.2.2(Sieve Test (Upper Declared Limit) - IS 6940:1982)	-	1200	Testing Charges for Sieve analysis (Upper declared limit and lower declared limit) are Rs. 1200/-
3.2.2(Sieve Test (Lower Declared Limit) - IS 6940:1982)	-	0	Testing Charges for Sieve analysis (Upper declared limit and lower declared limit) are Rs. 1200/- already mentioned above.
3.2.2(Ratio of lower to upper limit of sieve size)	-	0	Testing Charges for Sieve analysis (Upper declared limit and lower declared limit) are Rs. 1200/- already mentioned above.
3.2.3(Dust 75 Micron sieve- IS 6940:1982)	-	800	-
3.2.4.1(Attrition Test - IS 9359:2023)	-	2000	-
3.2.4.2(Water run-off test - IS 9359:2023)	-	2000	-
3.2.5(Moisture content - IS 6940:1982)	-	800	-
3.3.1(Carbofuran Content - IS 9360:2024)	-	1500	-
3.3.2(Acidity (as H2SO4) - IS 6940:1982)	-	600	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

105

IS 4783 (2024)

Thiram powder for dry seed treatment - Specification (second revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description - IS 4783:2024)	-	1000	-
3.2.2(Colour - IS 4783:2024)	-	1000	-
3.2.3(Sieving Requirement 150 micron sieve - IS 4783:2024)	-	2500	-
3.2.1(Description - IS 4783:2024)	-	0	Repeat entry
3.2.2(Colour - IS 4783:2024)	-	0	Repeat entry
3.2.3(Sieving Requirement 150 micron sieve - IS 4783:2024)	-	0	Repeat entry
3.3.1.(Thiram Content - IS 4320:2024)	-	4500	-
3.2.1(Description - IS 4783:2024)	-	0	-
3.2.2(Colour - IS 4783:2024)	-	0	-
3.2.3(Sieving Requirement 150 micron sieve - IS 4783:2024)	-	0	-
3.3.1.(Thiram Content - IS 4320:2024)	-	0	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

106

IS 4766 (2024)

Thiram water dispersible powder for slurry seed treatment - Specification (second revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 4766:2024)	-	1000	-
3.3, 7.1, Table 1 (i)(Thiram Content - IS 4320:2024)	-	4500	-
3.3, 7.1, Table 1 (ii)(Material passing through 53 micron IS sieve - IS 6940:1982)	-	2000	-
3.3, 7.1, Table 1 (iii)(Wettability - IS 6940:1982)	-	1500	-
CL 3.2.1(Description)	-	0	-
CL. 3.2.2(Colour)	-	0	-
CL 3.2.1(Description)	-	0	-
CL. 3.2.2(Colour)	-	0	-
CL 3.3.1(Thiram Content)	-	0	-
CL. 3.2.3(Sieving)	-	0	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

107

IS 4320 (2024)

Thiram technical - Specification Second Revision

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 4320:2024)	-	500	-
3.2, 7.1, Table 1 (i)(Bis (dimethylthiocarbamoyl) disulphide - IS 4320:2024)	-	2500	-
3.2, 7.1, Table 1 (ii)(Loss on drying at 60°C -- IS 4320:2024)	-	1500	-
3.2, 7.1, Table 1 (iii)(Ash content - IS 4320:2024)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

108

IS 3899 (2024)

Zineb water dispersible powder - Specification (Second Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 3899:2024)	-	800	-
3.2, 7.1, Table 1 (i)(Zineb Content - IS 3898:2024)	-	2500	-
3.2, 7.1, Table 1 (ii)(Zinc content - IS 3898:2024)	-	1500	-
3.2, 7.1, Table 1 (iii)(Material passing through 45 micron IS sieve - IS 6940:1982)	-	1500	-
3.2, 7.1, Table 1 (iv)(Suspensibility - IS 6940:1982)	-	3500	-
3.2, 7.1, Table 1 (v)(Wettability - IS 6940:1982)	-	1200	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

109

IS 5295 (2023)

Ethylene Glycol - Specification (Third Revision)

General and Fibre Grade

20600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1("Description IS 5295 : 2023 ")	-	600	Total testing charges for Fiber Grade are Rs. 20600/- Total testing charges for General Grade Rs. 14600/-
4.2Table 1 (i)("Colour IS 5295 : 2023 ")	-	1000	-
4.2Table 1 (ii)("Relative density at 20 °C/20 °C (IS 1448 (Part 167)")	-	1000	-
4.2Table 1 (iii)(a) Initial boiling point)	-	3500	Testing charges already mentioned are Rs. 3500/-
4.2Table 1 (iii)(b) The temperature at which 95 ml of material shall distil)	-	0	Testing charges already mentioned above i.e. Rs. 3500/-
4.2Table 1 (iv)("Moisture content 1448 (Part 175) / 1448(Part 182) ")	-	1500	-
4.2Table 1 (v)("Acidity (as acetic acid) IS 5295 : 2023 ")	-	1000	-
4.2Table 1 (vi)("Ultra-Violet transmittance in 1 cm cell at IS 5295 : 2023 ")	-	2500	Testing charges for Ultra violet transmittance are 2500/-
4.2Table 1 (vi)(a) 220 nm)	-	0	Testing charges already mentioned above i.e. Rs 2500/-
4.2Table 1 (vi)(b) 275 nm)	-	0	Testing charges already mentioned above i.e. Rs 2500/-
4.2Table 1 (vi)(c) 350 nm)	-	0	Testing charges already mentioned above i.e. Rs 2500/-
4.2Table 1 (vii)("Freezing point of equal volumes of material and water IS 5295 : 2023 ")	-	3500	-
4.2Table 1 (viii)("Iron content IS 5295 : 2023 ")	-	1500	-
4.2Table 1 (ix)("Chlorides content IS 5295 : 2023 ")	-	1500	-
4.2Table 1 (x)("Purity IS 5295 : 2023 ")	-	2500	-
4.2Table 1 (xi)("Diethylene glycol content IS 5295 : 2023 ")	-	2000	-
4.2Table 1 (xii)("Aldehyde (as HCHO) IS 5295 : 2023 ")	-	2000	-
4.1(Material shall be colourless)	-	0	Testing charges already mentioned above
4.2Table 1 (iii)("Distillation range at 760 mmHg IS 5298")	-	0	Testing charges already mentioned above
4.2-Table 1-i)(Colour, Pt-Co, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-ii)(Relative density1) at 20 °C/20 °C)	-	0	Testing charges already mentioned above
4.2-Table 1-iii)(Distillation range at 760 mmHg: a) Initial boiling point, °C Min b) The temperature at which 95 ml of material shall distil, °C, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-iv)(Moisture content, percent by mass, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-v)(Acidity (as acetic acid), ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-vi)(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min b) 275 nm, Min c) 350 nm, Min )	-	0	Testing charges already mentioned above
4.2-Table 1-vii)(Freezing point of equal volumes of material and water, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-viii)(Iron content, ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-ix)(Chlorides content (as Cl), ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-x)(Purity, percent, Min)	-	0	Testing charges already mentioned above
4.2-Table 1-xi)(Diethylene glycol content, ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-xii)(Aldehyde (as HCHO), ppm, Max)	-	0	Testing charges already mentioned above
6.1(Packing)	-	0	NA
6.2(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f.07.11.2024

110

IS 4412 (1981)

Specification for copper wires for general engineering purposes (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(Chemical Composition)	-	0	Total testing charges including chemical composition are Rs.12000/- Total Testing charges excluding chemical composition are Rs.6000/- Testing charges for Finish are Rs.500/-
5.1(Tensile Test)	-	2000	Testing charges for Tensile strength and Elongation are Rs.1000/-each.
6(Freedom from defect)	-	1000	-
7.1(Diameter and Tolerances)	-	2500	Testing charges for Dimension and Tolerances (Diameter/Distance between two parallel faces, Thickness, Radius of Square corner) are Rs.2500/-
Clause 4.1 ( Table -1)(Copper+Silver)	-	6000	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/-
Clause 4.1 ( Table -1)(phosphorus)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Antimony)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Arsenic)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Bismuth)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Iron)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Lead)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Nckel)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Selenium+Tellurium)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Tellurium)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Tin)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Total Impurities)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.

31 Dec, 2026

-
Included w.e.f.21.11.2024 Exclusion CL 5.2 (Embrittlement Test) (Given to ATH)

111

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

LD-2.5, MD-10, HD-20,EHD-35

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GRADES )	-	0	Total testing charges for Material (Cl. 4) are Rs. 3800/- (Testing charges for Material composition are Rs. 2000/- (P, S, C, Mn, Si are Rs.400/-each) . Testing charges for Tensile Test are Rs. 1000/- Testing charges for Hardness Test are Rs. 800/-)
3(TYPES)	-	0	Testing charges for Workmanship are Rs. 400/-
5.1.1(Covers and Frames)	-	500	-
5.1.2(Covers and Frames)	-	800	-
5.1.2(The rise of the chequer)	-	0	Testing charges for cover and frame ( Cover chequer design and rise) are Rs.800/-already mentioned above.
5.2(Key Holes and Keys)	-	1000	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.3(Locking Devices)	-	500	-
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	2000	-
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	0	Testing charges for Type/Shape of cover, Dimension clear opening in frame O,O1, Frame Depth Fd, fd, Frame sitting S, Test load, Weight , Manhole cover and frames are Rs.2000/-already mentioned above.
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	0	Testing charges for Type/Shape of cover, Dimension clear opening in frame O,O1, Frame Depth Fd, fd, Frame sitting S, Test load, Weight , Manhole cover and frames are Rs.2000/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	1200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
8(COATING - At 63˚C)	-	800	-
8(COATING - At 0˚C)	-	0	Testing charges already mentioned above.
10 and Table 3(LOAD TEST)	-	0	NA
3(GRADES )	-	0	As above
3(TYPES)	-	0	As above
5.1.1(Covers and Frames)	-	0	As above
5.1.2(Covers and Frames)	-	0	As above
5.1.2(The rise of the chequer)	-	0	As above
5.2(Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.3(Locking Devices)	-	0	As above
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	0	As above
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	0	As above
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	0	As above
8(COATING - At 63˚C)	-	0	As above
8(COATING - At 0˚C)	-	0	As above
10 and Table 3(LOAD TEST)	-	0	As above

31 Dec, 2026

-
Included w.e.f 23.12.2024

112

IS 1254 (2007)

Corrugated aluminium sheet (Fourth Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(FREEDOM FROM DEFECTS)	-	500	-
4(SUPPLY OF MATERIAL)	-	0	NA
5(PROFILE)	-	1000	Testing charges for Uniformity of corrugation is Rs. 500/-
6(MATERIAL)	-	5100	Testing charges for Chemical composition ( Al, Cu, Mg, Si, Mn, Fe, Zn, Ti, Cr) are Rs.500/-each, Testing charges for Cu+Si+Fe+Mn+Zn, are Rs. 200/- Testing charges for Cu+Mg+Si+Fe+Mn+Zn are Rs. 200/ Testing charges for Cr+Mn are Rs.200 each)
7.2(WIDTH)	-	0	Total charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/-
7.3(LENGTH)	-	0	Testing charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/- already mentioned above.
7.4(SQUARENESS)	-	0	Testing charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/- already mentioned above.
7.5(Depth and Pitch of the Corrugation)	-	0	Testing charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/- already mentioned above.
8(FINISH)	-	500	-
9(MARKING)	-	0	Testing charges for Mechanical properties are Rs. 1200/- for 0.2% proof stress, Rs. 1000/- for Tensile strength, Rs. 1000/- for Elongation and Rs. 1200/- for Bend test.
3(FREEDOM FROM DEFECTS)	-	0	Testing charges already mentioned above
4(SUPPLY OF MATERIAL)	-	0	NA
5(PROFILE)	-	0	Testing charges already mentioned above
6(MATERIAL)	-	0	Testing charges already mentioned above
7.2(WIDTH)	-	0	Testing charges already mentioned above
7.3(LENGTH)	-	0	Testing charges already mentioned above
7.4(SQUARENESS)	-	0	Testing charges already mentioned above
7.5(Depth and Pitch of the Corrugation)	-	0	Testing charges already mentioned above
8(FINISH)	-	0	Testing charges already mentioned above
9(MARKING)	-	0	NA

31 Dec, 2026

-
Included w.e.f 23.12.2024

113

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	500	Total testing charges are Rs.7700/-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	0	Testing charges already mentioned above
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	1000	Testing charges for Dimension and Tolerances ( Wall Thickness, In side/Outside Diameter, Straightness, Length, Width, Flatness, Angularity) are Rs.1000/-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	0	Testing charges mentioned below.
10(Tensile test)	-	2750	Testing charges for Mechanical Properties are Rs.2750/- ( 0.2 % proof - stress -Rs.1000/- , Tensile strength Rs.1000/-, Elongation Rs.750-)
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	350	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	100	Testing charges for Cu+Si+Fe+Mn+Zn are Rs.100/-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	100	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	100	Testing charges for Cu+Mg+Si+Fe+Mn+Zn are Rs.100/

31 Dec, 2026

-
Included w.e.f.21.11.2024

114

IS 453 (1993)

Double Acting Spring Hinges -Specification

Mild steel double acting , Brass double acting hinges

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	0	Total Testing Charges are including chemical composition are Rs. 24500/- Testing Charges are excluding chemical composition are Rs. 20500/-
9(PERFORMANCE TESTS)	-	8000	Testing charges for chemical composition (C,Si, Mn, S, P, V, Cu, Ti, Al, N, Nb, B) of Steel are Rs. 4000/- per Sample (Flap or Pin) Testing charges for steel are Rs. 8000/- for Material Composition of Flap and Pin
Clause 4.1(Mild Steel Sheet)	-	1000	Testing charges For Chemical composition ( Cu,Pb, Fe, Zn, P) of Brass are Rs. 4000/- per Sample (Flap or Pin) Testing charges are Rs. 8000/- for Material Composition of Flap and
Clause 4.2(Mild Steel Wire)	-	1500	-
Clause 4.3(Cast Brass)	-	0	-
Clause 4.4(Brass Sheets)	-	0	-
Clause 4.5(Brass Rods)	-	1000	-
Clause 4.6(Steel Wire)	-	0	-
Clause 4.7(Phosphor Bronze Wire)	-	0	-
Clause 5(Sizes)	-	500	-
Clause 6(Dimensions)	-	4000	Testing charges for Dimension and Tolerances-Casing Thickness, Spring size, Spindle Dia., CSK Holes for Screw No., Flap Thickness are Rs. 800/-each.
Clause 8(Finish)	-	500	-
Clause 9(Performance Test)	-	0	Testing charges already mentioned above.
Clause 10(Marking)	-	0	NA
Clause 11(Packing)	-	0	NA
Cl-7.1(Mild Steel Hinges)	-	0	-
Cl-7.2(Brass Hinges)	-	0	-
Cl-7.2.1(Blank hinges shall be made of cast brass)	-	0	-
Clause-9.0(Performance Test)	-	0	Testing charges already mentioned above.
Cl-7.1.1(Blank hinge shall be made from mild steel sheet)	-	0	Testing charges already mentioned above
6(DIMENSIONS)	-	0	Testing charges already mentioned above
9(PERFORMANCE TESTS)	-	0	Testing charges already mentioned above
Clause 4.1(Mild Steel Sheet)	-	0	Testing charges already mentioned above
Clause 4.2(Mild Steel Wire)	-	0	Testing charges already mentioned above
Clause 4.3(Cast Brass)	-	0	Testing charges already mentioned above
Clause 4.4(Brass Sheets)	-	0	Testing charges already mentioned above
Clause 4.5(Brass Rods)	-	0	Testing charges already mentioned above
Clause 4.6(Steel Wire)	-	0	Testing charges already mentioned above
Clause 4.7(Phosphor Bronze Wire)	-	0	Testing charges already mentioned above
Clause 5(Sizes)	-	0	Testing charges already mentioned above
Clause 6(Dimensions)	-	0	Testing charges already mentioned above
Clause 8(Finish)	-	0	Testing charges already mentioned above
Clause 9(Performance Test)	-	0	Testing charges already mentioned above
Clause 10(Marking)	-	0	Testing charges already mentioned above
Clause 11(Packing)	-	0	Testing charges already mentioned above
Cl-7.1(Mild Steel Hinges)	-	0	Testing charges already mentioned above
Cl-7.2(Brass Hinges)	-	0	Testing charges already mentioned above
Cl-7.2.1(Blank hinges shall be made of cast brass)	-	0	Testing charges already mentioned above
Clause-9.0(Performance Test)	-	0	Testing charges already mentioned above
Cl-7.1.1(Blank hinge shall be made from mild steel sheet)	-	0	Testing charges already mentioned above

31 Dec, 2026

-
Included w.e.f.10.12.2024

115

IS 863 (2023)

Medical Textiles - Cotton bandage cloth - Specification third revision of IS 863

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Fibre Identification)	-	800	Total charges Rs. 7700/- for Dyed Cloth Bandage. Total charges Rs. 5700/- for White Cloth Bandage.
4.2, Table 1, i)(Count of yarn (for guidance only))	-	500	-
4.2, Table 1, ii)(Threads, dm, Min)	-	500	-
4.2, Table 1, iii)(Mass, g/m2)	-	400	-
4.2, Table 1, iv)(Length, m, tolerance)	-	300	-
4.2, Table 1, v)(Width, m, tolerance)	-	300	-
4.2, Table 1, vi)(pH value of acqueous extract)	-	500	-
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	800	-
4.2, Table 1, viii)(Freedom from optical whiteners)	-	600	-
4.2, Table 1, ix)(Colour fastness: a) Light)	-	1000	-
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	1000	-
4.2, Table 1, x)(Sterility (optional))	-	1000	Testing charges for Microbial / Bioburden test
6(Marking)	-	0	Not applicable
4.1(Fibre Identification)	-	0	As above
4.2, Table 1, i)(Count of yarn (for guidance only))	-	0	As above
4.2, Table 1, ii)(Threads, dm, Min)	-	0	As above
4.2, Table 1, iii)(Mass, g/m2)	-	0	As above
4.2, Table 1, iv)(Length, m, tolerance)	-	0	As above
4.2, Table 1, v)(Width, m, tolerance)	-	0	As above
4.2, Table 1, vi)(pH value of acqueous extract)	-	0	As above
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	0	As above
4.2, Table 1, viii)(Freedom from optical whiteners)	-	0	As above
4.2, Table 1, ix)(Colour fastness: a) Light)	-	0	As above
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	0	As above
4.2, Table 1, x)(Sterility (optional))	-	0	As above
6(Marking)	-	0	As above

31 Dec, 2026

-
Included w.e.f 12.12.2024

116

IS 758 (2023)

MEDICAL TEXTILES ï¿½ COTTON ABSORBENT GAUZE ï¿½ SPECIFICATION ( Fifth Revision of IS 758 )

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Yarn)	-	600	Total testing charges are Rs. 7800/- including Raw material Testing charges are Rs. 6400/- without Raw material
Cl-3.2("Cloth- shall be free from weaving defects, sizing, dressing and filling materials, and substances liable to cause subsequent tendering.Shall be reasonably free from holes, slubs, snarls and naps")	-	800	-
Cl-3.2 a("Cloth- The fabric shall be reasonably free from Odour")	-	0	Testing charges already mentioned above i.e. Rs. 800/-.
Cl-3.2 b("Cloth- The fabric shall be reasonably free from Defective Selvedge")	-	0	Testing charges already mentioned above i.e. Rs. 800/-.
Cl-3.2 c("Cloth- The fabric shall be reasonably free from Cracks")	-	0	Testing charges already mentioned above i.e. Rs. 800/-.
Cl-3.2 d("Cloth- The fabric shall be reasonably free from Double ends")	-	0	Testing charges already mentioned above i.e. Rs. 800/-.
Cl-3.2 e("Cloth- The fabric shall be reasonably free from Sloughing")	-	0	Testing charges already mentioned above i.e. Rs. 800/-.
Cl-4.1(Fibre Identification)	-	800	-
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (a)-Warp")	-	500	-
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (b)-Weft")	-	0	Testing charges already mentioned above i.e. Rs. 500/-.
Cl-4.2, Table 1 (ii)(Threads/dm)	-	500	-
Cl-4.2, Table 1 (iii)(Mass, g/m2)	-	400	-
Cl-4.2, Table 1 (iv)(Length, m)	-	300	-
Cl-4.2, Table 1 (v)(Width, cm)	-	300	-
Cl-4.2, Table 1 (vi)(Absorbency)	-	600	-
Cl-4.2, Table 1 (vii)(pH value of aqueous extract)	-	600	-
Cl-4.2, Table 1 (viii)(Scouring loss, percent)	-	800	-
Cl-4.2, Table 1 (ix)(Freedom from optical whitener)	-	600	-
Cl-4.2, Table 1 (x)(Sterility (optional))	-	1000	Testing charges for Microbial / Bioburden test.
Cl-5(Marking)	-	0	NA
Cl-3.1(Yarn)	-	0	Testing Charges mentioned above
Cl-3.2("Cloth- shall be free from weaving defects, sizing, dressing and filling materials, and substances liable to cause subsequent tendering.Shall be reasonably free from holes, slubs, snarls and naps")	-	0	Testing Charges mentioned above
Cl-3.2 a("Cloth- The fabric shall be reasonably free from Odour")	-	0	Testing Charges mentioned above
Cl-3.2 b("Cloth- The fabric shall be reasonably free from Defective Selvedge")	-	0	Testing Charges mentioned above
Cl-3.2 c("Cloth- The fabric shall be reasonably free from Cracks")	-	0	Testing Charges mentioned above
Cl-3.2 d("Cloth- The fabric shall be reasonably free from Double ends")	-	0	Testing Charges mentioned above
Cl-3.2 e("Cloth- The fabric shall be reasonably free from Sloughing")	-	0	Testing Charges mentioned above
Cl-4.1(Fibre Identification)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (a)-Warp")	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (b)-Weft")	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (ii)(Threads/dm)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (iii)(Mass, g/m2)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (iv)(Length, m)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (v)(Width, cm)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (vi)(Absorbency)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (vii)(pH value of aqueous extract)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (viii)(Scouring loss, percent)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (ix)(Freedom from optical whitener)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (x)(Sterility (optional))	-	0	Testing Charges mentioned above
Cl-5(Marking)	-	0	Testing Charges mentioned above
Cl-3.1(Yarn)	-	0	Testing Charges mentioned above
Cl-3.2("Cloth- shall be free from weaving defects, sizing, dressing and filling materials, and substances liable to cause subsequent tendering.Shall be reasonably free from holes, slubs, snarls and naps")	-	0	Testing Charges mentioned above
Cl-3.2 a("Cloth- The fabric shall be reasonably free from Odour")	-	0	Testing Charges mentioned above
Cl-3.2 b("Cloth- The fabric shall be reasonably free from Defective Selvedge")	-	0	Testing Charges mentioned above
Cl-3.2 c("Cloth- The fabric shall be reasonably free from Cracks")	-	0	Testing Charges mentioned above
Cl-3.2 d("Cloth- The fabric shall be reasonably free from Double ends")	-	0	Testing Charges mentioned above
Cl-3.2 e("Cloth- The fabric shall be reasonably free from Sloughing")	-	0	Testing Charges mentioned above
Cl-4.1(Fibre Identification)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (a)-Warp")	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (b)-Weft")	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (ii)(Threads/dm)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (iii)(Mass, g/m2)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (iv)(Length, m)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (v)(Width, cm)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (vi)(Absorbency)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (vii)(pH value of aqueous extract)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (viii)(Scouring loss, percent)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (ix)(Freedom from optical whitener)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (x)(Sterility (optional))	-	0	Testing Charges mentioned above
Cl-5(Marking)	-	0	Testing Charges mentioned above
Cl-3.1(Yarn)	-	0	Testing Charges mentioned above
Cl-3.2("Cloth- shall be free from weaving defects, sizing, dressing and filling materials, and substances liable to cause subsequent tendering.Shall be reasonably free from holes, slubs, snarls and naps")	-	0	Testing Charges mentioned above
Cl-3.2 a("Cloth- The fabric shall be reasonably free from Odour")	-	0	Testing Charges mentioned above
Cl-3.2 b("Cloth- The fabric shall be reasonably free from Defective Selvedge")	-	0	Testing Charges mentioned above
Cl-3.2 c("Cloth- The fabric shall be reasonably free from Cracks")	-	0	Testing Charges mentioned above
Cl-3.2 d("Cloth- The fabric shall be reasonably free from Double ends")	-	0	Testing Charges mentioned above
Cl-3.2 e("Cloth- The fabric shall be reasonably free from Sloughing")	-	0	Testing Charges mentioned above
Cl-4.1(Fibre Identification)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (a)-Warp")	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (i)("Count of yarn (for guidance only) (b)-Weft")	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (ii)(Threads/dm)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (iii)(Mass, g/m2)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (iv)(Length, m)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (v)(Width, cm)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (vi)(Absorbency)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (vii)(pH value of aqueous extract)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (viii)(Scouring loss, percent)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (ix)(Freedom from optical whitener)	-	0	Testing Charges mentioned above
Cl-4.2, Table 1 (x)(Sterility (optional))	-	0	Testing Charges mentioned above
Cl-5(Marking)	-	0	Testing Charges mentioned above
Cl.4.2 - Table No 1 - Sl. No.-vi(Absorbency- IS 2369)	-	0	Testing Charges mentioned above
Cl.4.2 - Table No 1 - Sl. No.-vii(pH value of aqueous extract - IS 1390)	-	0	Testing Charges mentioned above
Cl.4.2 - Table No 1 - Sl. No.-viii(Scouring loss - IS 1383 (mild method))	-	0	Testing Charges mentioned above
Cl.4.2 - Table No 1 - Sl. No.-ix("Freedom from optical whitener - viewing under ultra-violet light")	-	0	Testing Charges mentioned above
Medical Textiles — Absorbent Cotton Gauze — Specification (Fifth Revision)(Sterile product)	-	0	Testing Charges mentioned above
4.3(Non-sterile product)	-	0	Testing Charges mentioned above

31 Dec, 2026

-
Included w.e.f 12.12.2024

117

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Workmanship & Finish)	-	1000	Total Testing charges including Chemical composition parameters are Rs.17000/- Testing charges excluding Chemical composition parameters are Rs.8000/-
Cl.6.2(Ultimate Tensile Strength- IS 2657)	-	1500	Total Testing charges for Chemical composition parameters are Rs.6000/-
Cl.6.2(0.2 percent proof strength- IS 2657)	-	1500	-
Cl.6.2(Elongation on 50 mm gauge length- IS 2657)	-	1000	-
Cl. 6.3(Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-	1500	-
Cl. 6.4(Hydrostatic Pressure Test-Cl. 6.4)	-	3000	NA
Cl.7.1, Table 2(Outside Diameter-)	-	1500	Testing Charges for Dimension and Tolerances ( outside diameter, Roundness or Ovality, Wall Thickness) are Rs.1500/-
Cl.7.1, Table 2(Roundness or Ovality)	-	0	Testing Charges for Dimension and Tolerances ( outside diameter, Roundness or Ovality, Wall Thickness) are Rs.1500/- already mentioned above.
Cl.7.1, Table 2(Wall Thickness)	-	0	Testing Charges for Dimension and Tolerances ( outside diameter, Roundness or Ovality, Wall Thickness) are Rs.1500/- already mentioned above.
Cl. 7.2(Length)	-	0	NA
Cl. 6.1(Copper- IS 504 or any other established instrumental/ chemical method)	-	600	-
Cl. 6.1(Magnesium- IS 504 or any other established instrumental/ chemical method)	-	600	-
Cl. 6.1(Silicon- IS 504 or any other established instrumental/ chemical method)	-	600	-
Cl. 6.1(Iron- IS 504 or any other established instrumental/ chemical method)	-	600	-
Cl. 6.1(Manganese- IS 504 or any other established instrumental/ chemical method)	-	600	-
Cl. 6.1(Zinc- IS 504 or any other established instrumental/ chemical method)	-	600	-
Cl. 6.1(Chromium- IS 504 or any other established instrumental/ chemical method)	-	600	-
Cl. 6.1(Titanium and/ other grain refining elements)	-	600	-
Cl. 6.1(Aluminium- IS 504 or any other established instrumental/ chemical method)	-	600	-
9.1(Marking)	-	0	NA
14(Workmanship & Finish)	-	0	Testing charges already mentioned above
7.1(Dimensions)	-	0	Testing charges already mentioned above
6.2(Mechanical properties)	-	0	Testing charges already mentioned above
6.3(Drift Expanding Test)	-	0	Testing charges already mentioned above
6.4(Drift Expanding Testt)	-	0	Testing charges already mentioned above
5.3.2(hydrostatic pressure test)	-	0	NA
6.3(Drift expanding test)	-	0	Testing charges already mentioned above
7.1 table 2(Dimensions and tolerances for extruded tubes)	-	0	Testing charges already mentioned above
6.1(chemical composition)	-	600	Testing charges for chemical composition parameters (Cu+Si+Fe+Mn+Zn, Cu+Si+Fe+Mn+Zn+Mg, Cr+Mn ) are Rs.200/-each.
6.2(ultimate tensile strength)	-	0	Testing charges already mentioned above
6.2(0.2% proof strength)	-	0	Testing charges already mentioned above
6.2(Elongation on 50 mm gauge length)	-	0	Testing charges already mentioned above
Cl.4(Workmanship & Finish)	-	0	NA
Cl.6.2(Ultimate Tensile Strength- IS 2657)	-	0	NA
Cl.6.2(0.2 percent proof strength- IS 2657)	-	0	NA
Cl.6.2(Elongation on 50 mm gauge length- IS 2657)	-	0	NA
Cl. 6.3(Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-	0	NA
Cl. 6.4(Hydrostatic Pressure Test-Cl. 6.4)	-	0	NA
Cl.7.1, Table 2(Outside Diameter-)	-	0	NA
Cl.7.1, Table 2(Roundness or Ovality)	-	0	NA
Cl.7.1, Table 2(Wall Thickness)	-	0	NA
Cl. 7.2(Length)	-	0	NA
Cl. 6.1(Copper- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Magnesium- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Silicon- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Iron- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Manganese- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Zinc- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Chromium- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Titanium and/ other grain refining elements)	-	0	NA
Cl. 6.1(Aluminium- IS 504 or any other established instrumental/ chemical method)	-	0	NA
9.1(Marking)	-	0	NA
14(Workmanship & Finish)	-	0	NA
7.1(Dimensions)	-	0	NA
6.2(Mechanical properties)	-	0	NA
6.3(Drift Expanding Test)	-	0	NA
6.4(Drift Expanding Testt)	-	0	NA
5.3.2(hydrostatic pressure test)	-	0	NA
6.3(Drift expanding test)	-	0	NA
7.1 table 2(Dimensions and tolerances for extruded tubes)	-	0	NA
6.1(chemical composition)	-	0	NA
6.2(ultimate tensile strength)	-	0	NA
6.2(0.2% proof strength)	-	0	NA
6.2(Elongation on 50 mm gauge length)	-	0	NA
Cl.4(Workmanship & Finish)	-	0	NA
Cl.6.2(Ultimate Tensile Strength- IS 2657)	-	0	NA
Cl.6.2(0.2 percent proof strength- IS 2657)	-	0	NA
Cl.6.2(Elongation on 50 mm gauge length- IS 2657)	-	0	NA
Cl. 6.3(Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-	0	NA
Cl. 6.4(Hydrostatic Pressure Test-Cl. 6.4)	-	0	NA
Cl.7.1, Table 2(Outside Diameter-)	-	0	NA
Cl.7.1, Table 2(Roundness or Ovality)	-	0	NA
Cl.7.1, Table 2(Wall Thickness)	-	0	NA
Cl. 7.2(Length)	-	0	NA
Cl. 6.1(Copper- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Magnesium- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Silicon- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Iron- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Manganese- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Zinc- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Chromium- IS 504 or any other established instrumental/ chemical method)	-	0	NA
Cl. 6.1(Titanium and/ other grain refining elements)	-	0	NA
Cl. 6.1(Aluminium- IS 504 or any other established instrumental/ chemical method)	-	0	NA
9.1(Marking)	-	0	NA
14(Workmanship & Finish)	-	0	NA
7.1(Dimensions)	-	0	NA
6.2(Mechanical properties)	-	0	NA
6.3(Drift Expanding Test)	-	0	NA
6.4(Drift Expanding Testt)	-	0	NA
5.3.2(hydrostatic pressure test)	-	0	NA
6.3(Drift expanding test)	-	0	NA
7.1 table 2(Dimensions and tolerances for extruded tubes)	-	0	NA
6.1(chemical composition)	-	0	NA
6.2(ultimate tensile strength)	-	0	NA
6.2(0.2% proof strength)	-	0	NA
6.2(Elongation on 50 mm gauge length)	-	0	NA

31 Dec, 2026

-
Included w.e.f 22.01.2025

118

IS 7092 : Part 1 (1992)

Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	0	Total testing charges are Rs.16500/-Including chemical composition parameters. Testing charges are Rs.10500/-Excluding chemical composition parameters.
5(Workmanship and Finish)	-	1000	Testing charges are Rs.6000/- (Rs. 500/- for each parameter) for chemical composition parameters only. (Al, Cu, Mg, Mn, Si,Fe, Zn , Ti, Cr, Cu+Fe+Si+Mn+Zn, Cu+Fe+Si+Mn+Zn+Mg, Cr+Mn ). .
8(Dimensions)	-	1500	Testing charges for Dimension and Tolerances ( Outside Diameter, Roundness or Ovality, Wall Thickness) are Rs. 1500/-
7.2(Mechanical properties)	-	1500	Testing charges for Mechanical Properties ( Tensile strength, 0.2% proof Test, Elongation and Bend Test ) are Rs.1500/-
7.3(Flattening test)	-	1500	-
7.4(Hydrostatic test)	-	5000	-
10(Marking)	-	0	NA
5(Workmanship and Finish)	-	0	NA
8(Dimensions)	-	0	NA
7.2(Mechanical properties)	-	0	NA
7.3(Flattening test)	-	0	NA
7.4(Hydrostatic test)	-	0	NA
10(Marking)	-	0	NA
5(Workmanship and Finish)	-	0	NA
8(Dimensions)	-	0	NA
7.2(Mechanical properties)	-	0	NA
7.3(Flattening test)	-	0	NA
7.4(Hydrostatic test)	-	0	NA

31 Dec, 2026

-
Included w.e.f 22.01.2025

119

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

Wrought Aluminum and Aluminum alloy

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	Total testing charges are Rs. 6000/-including chemical composition. Testing charges are Rs. 3000/-excluding chemical composition only. Testing charges are Rs. 3000/-for chemical composition only.
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges for Cl.no.4.1 Table 1 Cu+Si+Fe+Mn+Zn are Rs.100/-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	0	NA
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	100	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	100	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	0	Testing charges already mentioned above.
6(Freedom From Defects)	-	500	-
7(Dmension And Tolerances)	-	500	-
9.2(Head Forming Test)	-	1000	-
11(Marking)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	0	Testing charges already mentioned above.
6(Freedom From Defects)	-	0	Testing charges already mentioned above.
7(Dmension And Tolerances)	-	0	Testing charges already mentioned above.
9.2(Head Forming Test)	-	0	Testing charges already mentioned above.
11(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 22.01.2025

120

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

G-1, G-2, G-3, G-4

8600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General requirements )	-	0	Total Testing Charges including chemical composition are Rs.8600/-. Testing Charges excluding chemical composition are Rs. 1000/- Testing Charges for chemical composition are Rs. 7600/-
4(Manufacture )	-	0	NA
5(Grades)	-	0	NA
6.1(Chemical composition )	-	1500	Testing Charges for Gallium, Titanium and Chromium are Rs. 500/-each.
7.1(Shapes and sizes)	-	1000	Testing charges for Shape, Size and weight are Rs.1000/-only.
9(Marking)	-	0	NA
Table-1, Clause - 6.1.1(Copper)	-	500	-
Table-1, Clause - 6.1.1(Iron)	-	500	-
Table-1, Clause - 6.1.1(Magnesium)	-	500	-
Table-1, Clause - 6.1.1(Manganese)	-	500	-
Table-1, Clause - 6.1.1(Titanium + Vanadium)	-	100	-
Table-1, Clause - 6.1.1(Silicon)	-	500	-
Table-1, Clause - 6.1.1(Vanadium)	-	500	-
Table-1, Clause - 6.1.1(Zinc)	-	500	-
Table-1, Clause - 6.1.1(Other elements (each))	-	1000	-
Table-1, Clause - 6.1.1(Others Total)	-	1000	-
Table-1, Clause - 6.1.1(Aluminium)	-	500	-

31 Dec, 2026

-
Included w.e.f 22.01.2025

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

IDMA LABORATORIES LIMITED, PANCHKULA

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List