BIS - LIMS (Laboratory Information Management System)

IDMA LABORATORIES LIMITED, PANCHKULA

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List

Reset

486 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 18316 (2023)

HOT ROLLED AND COLD ROLLED STEEL STRIPS INTENDED FOR PROCESSING OF SEMIFULLY PROCESSED NON-GRAIN ORIENTED ELECTRICAL STEEL OR FULLY PROCESSED GRAIN ORIENTED ELECTRICAL STEEL SPECIFICATION

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 7.0(Carbon)	-	1000	-
Clause. 7.0(Silicon)	-	1000	-
Clause. 7.0(Sulphur)	-	1000	-
Clause. 7.0(Phosphorus)	-	1000	-
Clause. 7.0(Manganese)	-	1000	-
Clause. 7.0(Aluminium)	-	1000	Testing Charges for Nitrogen is INR 1500/-
Clause.8.0(Freedom From Defects)	-	800	-
Clause.9.0(Dimensions, Shape & Tolerances (for Hot-rolled Steel))	-	3000	Total testing charges for clause no. 9 Dimensions (Thickness, Size, Mass, Crown, Permissible Width Variations and Camber) are Rs. 3000/-
Clause.10.0(Dimensions, Shape & Tolerances (for Cold-rolled Steel))	-	1500	Testing charges for clause no. 10.1 & 10.2 (Thickness variation, Width tolerance and Weld Height edge burr) are Rs. 1500/-
Clause. 7.0(Carbon)	-	0	Testing charges already mentioned above
Clause. 7.0(Silicon)	-	0	Testing charges already mentioned above
Clause. 7.0(Sulphur)	-	0	Testing charges already mentioned above
Clause. 7.0(Phosphorus)	-	0	Testing charges already mentioned above
Clause. 7.0(Manganese)	-	0	Testing charges already mentioned above
Clause. 7.0(Aluminium)	-	0	Testing charges already mentioned above
Clause.8.0(Freedom From Defects)	-	0	Testing charges already mentioned above
Clause.9.0(Dimensions, Shape & Tolerances (for Hot-rolled Steel))	-	0	Testing charges already mentioned above
Clause.10.0(Dimensions, Shape & Tolerances (for Cold-rolled Steel))	-	0	Testing charges already mentioned above

31 Dec, 2026

-
Included w.e.f 23.12.2024

IS 13164 (1991)

Ferrosilicomagnesium - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-3.2.1(Tapped Lot Method)	-	0	Test not applicable
Clause-3.2.2(Graded Lot Method)	-	0	Test not applicable
Clause-3.2.3(Blended Lot Method)	-	0	Test not applicable
Clause-3.3(Definition)	-	0	Test not applicable
Clause-4(Grades)	-	0	Test not applicable
Clause-6(Supply of Material)	-	0	Test not applicable
Clause-7.1(Constitution of Consignment)	-	0	Test not applicable
Clause-7.2.1, Table-1(Si)	-	2000	-
Clause-7.2.1, Table-1(Mg)	-	2000	-
Clause-7.2.1, Table-1(Al, Max)	-	2000	-
Clause-7.2.1, Table-1(Ca, Max)	-	2000	-
Clause-8.1(Size Range)	-	3500	Testing charges for Clause 9 Extraneous Contamination is INR 1000
Clause-12(Marking)	-	0	Test not applicable

31 Dec, 2026

-
Included w.e.f 23.12.2024

IS 8401 (1994)

Alkyl benzene sulphonic acid (Acid Slurry) - Specification (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	1000	-
5.2, table 1 (i)(Active matter as alkyl benzene sulphonic acid, % by mass, Min)	-	8500	-
5.2, table 1 (ii)(Free alkyl benzene, % by mass,Max)	-	2500	-
5.2, table 1 (iii)(Free sulphonic acid,5 by mass, Max)	-	3000	-
5.2, table 1 (iv)(Colour: a)of 10 % alcohol solution(mass by mass) in 1/4 in cell on Lovibond Tintometer, not darker than)	-	10000	a) of 10% alcoholic sol. (mass by mass) in 1/4 in cell on lovibond tintometer not darkar than INR 2000 b) of sol. In distilled water containing 5% active matter on Klett colorimeter max (in Klett) INR 8000
6.1(Packing)	-	0	Test not applicable
6.2(Marking)	-	0	Test not applicable
6.2(Marking)	-	0	Test not applicable

31 Dec, 2026

-
Included w.e.f.10.12.2024

IS 17988 (2022)

CHLORINATED POLYVINYL CHLORIDE CPVC RESIN SPECIFICATION

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grades)	-	0	Rs. 20000/- Excluding Special Requirements Rs. 14000/- for Special Requirements only For Basic resin test covered separately UNDER IS 17658
5.1(Basic Resin)	-	0	Rs. 20000/- Excluding Special Requirements Rs. 14000/- for Special Requirements only For Basic resin test covered separately UNDER IS 17658
5.2 Table - 1 (i)(K Value for PVC resin, Min)	-	2000	-
5.2 Table - 1 (ii)(Inherent Viscosity, Min)	-	2000	-
5.2 Table - 1 (iii)(Sieve Analysis, material retained on 250- micron sieve, percent by weight, Max)	-	1500	-
5.2 Table - 1 (iv)(Average Particle Size, micron)	-	2000	-
5.2 Table - 1 (v)(Apparent density, g/ml)	-	1500	-
5.2 Table - 1 (vi)(Dry Flow of 140 g, sec, Max)	-	1500	-
5.2 Table - 1 (vii)(Volatile Matter, percent, Max)	-	1500	-
5.2 Table - 1 (viii)(Chlorine Content, percent, Min)	-	1500	-
5.2 Table - 1 (ix)(RVCM Content, ppm, Max)	-	5000	-
5.2 Table - 1 (x)(Foreign Matter, Max)	-	1500	-
6(SPECIAL REQUIREMENTS OF POLYMER USED FOR MOULDING)	-	14000	1) RVCM Content INR 5000 2) Migration of RVCM into Food stuff INR 5000 3) Overall Migration INR 4000
7(Packing and Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

IS 14549 (1998)

Hexaconazole, technical - Specification

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 (g), Table 1 (i), Annex-A(Hexaconazole Content)	-	4000	-
Table 1 (ii)(Moisture Content)	-	1500	-
Table 1 (iii)(Acidity)	-	1200	-
Table 1 (iv)(Material insoluble in acetone)	-	1200	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

IS 17659 (2021)

SPECIFICATION FOR POLYESTER POLYOL

14300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 , Table 1 , 1) , i)(Visual appearance)	-	800	-
4 , Table 1 , 1) , ii)(Hydroxyl value, mg-KOH/g, Max)	-	3500	-
4 , Table 1 , 1) , iii)(Acid value, mg-KOH/g, Max)	-	3500	-
4 , Table 1 , 1) , iv)(Water content/Moisture, percent, Max)	-	3000	-
4 , Table 1 , 1) , v)(Viscosity at 25 °C, mPa-s, Max)	-	3500	Testing Charges for Viscosity at 25˚C ,Viscosity at 35˚C & Viscosity at 70˚C is 3500
4 , Table 1 , 1) , vi)(Viscosity at 35 °C, mPa-s, Max)	-	0	Testing Charges for Viscosity at 25˚C ,Viscosity at 35˚C & Viscosity at 70˚C is INR 3500
4 , Table 1 , 1) , vii)(Viscosity at 70 °C, mPa-s, Max)	-	0	Testing Charges for Viscosity at 25˚C ,Viscosity at 35˚C & Viscosity at 70˚C is INR 3500
5(PACKING AND MARKING)	-	0	Test not applicable

31 Dec, 2026

-
Included w.e.f.10.02.2025

IS 6971 (1998)

2 - Ethylhexan - I - Ol - Specification (First Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	-
4.2-Table 1-(i)(Colour hazen units Max)	-	1500	-
4.2-Table 1-(ii)(Relative density 27°/27°C)	-	1500	-
4.2-Table 1-(iii)(Distillation range)	-	3000	(iii) Distillation range a) Initial Boiling point 1500 b) Dry Point 1500
4.2-Table 1-(iv)(Water content, percent by mass, Max)	-	1500	-
4.2-Table 1-(v)(Acidity (as acetic acid), percent by mass, Max)	-	1500	-
4.2-Table 1-(vi)(Aldehydes and ketones (as carbony) group percent by mass, max)	-	2000	-
4.2-Table 1-(vii)(Sulphuric acid colour hazen units Max)	-	1500	-
4.2-Table 1-(viii)(Purity, percent by mass)	-	3500	-
5(PRECAUTION IN HANDLING)	-	0	Test not applicable
6(Packing And Marking)	-	0	Test not applicable

31 Dec, 2026

-
Included w.e.f.10.12.2024

IS 14314 (1995)

Thtnner,general purpose,for synthetic paints and varnishes - Specification

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5.1, Clause 4.2, Table 1 (Sr.No. x)(Keeping Quality (Copper corrosion))	-	2000	Rs.39000/- Including Keeping Quality Rs. 19500/- Without Keeping Quality
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ix)(Keeping Quality (Water content))	-	2000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. viii)(Keeping Quality (Hydrocarbon content))	-	2500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vii)(Keeping Quality (Residue on evaporation))	-	2000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vi)(Keeping Quality (Flash point (Abel)))	-	2000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. v)(Keeping Quality (Distillation range))	-	3000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iv)(Keeping Quality (Relative density at 27 °C))	-	2000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iii)(Keeping Quality (Spot test))	-	1000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ii)(Keeping Quality (Odour))	-	1000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. i)(Keeping Quality (Colour))	-	1000	-
Clause 4.2, Table 1 (Sr.No. x)(Copper corrosion)	-	2000	-
Clause 4.2, Table 1 (Sr.No. ix)(Water content)	-	2000	-
Clause 4.2, Table 1 (Sr.No. viii)(Hydrocarbon content)	-	2500	-
Clause 4.2, Table 1 (Sr.No. vii)(Residue on evaporation)	-	2000	-
Clause 4.2, Table 1 (Sr.No. vi)(Flash point (Abel))	-	2000	-
Clause 4.2, Table 1 (Sr.No. v)(Distillation range)	-	3000	-
Clause 4.2, Table 1 (Sr.No. iv)(Relative density at 27 °C)	-	2000	-
Clause 4.2, Table 1 (Sr.No. iii)(Spot test)	-	1000	-
Clause 4.2, Table 1 (Sr.No. ii)(Odour)	-	1000	-
Clause 4.2, Table 1 (Sr.No. i)(Colour)	-	1000	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. x)(Keeping Quality (Copper corrosion))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ix)(Keeping Quality (Water content))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. viii)(Keeping Quality (Hydrocarbon content))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vii)(Keeping Quality (Residue on evaporation))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vi)(Keeping Quality (Flash point (Abel)))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. v)(Keeping Quality (Distillation range))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iv)(Keeping Quality (Relative density at 27 °C))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iii)(Keeping Quality (Spot test))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ii)(Keeping Quality (Odour))	-	-	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. i)(Keeping Quality (Colour))	-	-	-
Clause 4.2, Table 1 (Sr.No. x)(Copper corrosion)	-	-	-
Clause 4.2, Table 1 (Sr.No. ix)(Water content)	-	-	-
Clause 4.2, Table 1 (Sr.No. viii)(Hydrocarbon content)	-	-	-
Clause 4.2, Table 1 (Sr.No. vii)(Residue on evaporation)	-	-	-
Clause 4.2, Table 1 (Sr.No. vi)(Flash point (Abel))	-	-	-
Clause 4.2, Table 1 (Sr.No. v)(Distillation range)	-	-	-
Clause 4.2, Table 1 (Sr.No. iv)(Relative density at 27 °C)	-	-	-
Clause 4.2, Table 1 (Sr.No. iii)(Spot test)	-	-	-
Clause 4.2, Table 1 (Sr.No. ii)(Odour)	-	-	-
Clause 4.2, Table 1 (Sr.No. i)(Colour)	-	-	-

31 Dec, 2026

-
Included w.e.f.11.11.2024

IS 16920 (2018)

Hexaconazole + zineb, wettable powder (WP) ? Specification

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Constituents)	-	0	Test Not Applicable
3.2.1(Description)	-	1500	-
3.2.2(Sieving Requirement)	-	2000	-
3.2.3(Suspensibility)	-	6000	-
3.2.4(Wettability)	-	2000	-
3.3.1(Hexaconazole and Zineb Content)	-	7000	Testing Charges for Hexaconazole Content : INR 4000 + Zineb : INR 3000
3.3.2(Acidity or Alkalinity)	-	2000	-
5(Packing)	-	0	Test not applicable
6(Marking)	-	0	Test not applicable
3.1(Constituents)	-	0	As above
3.2.1(Description)	-	0	As Above
3.2.2(Sieving Requirement)	-	0	As Above
3.2.3(Suspensibility)	-	0	As Above
3.2.4(Wettability)	-	0	As above
3.3.1(Hexaconazole and Zineb Content)	-	0	As above
3.3.2(Acidity or Alkalinity)	-	0	As Above
5(Packing)	-	0	As Above
6(Marking)	-	0	As Above

31 Dec, 2026

-
included w.e.f 17.10.2024

IS 4431 (1978)

Specification for carbon and carbon manganese free cutting steels (First Revision)

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Vanadium)	-	1000	-
Cl. 6(Copper)	-	1000	-
Cl. 6(Nickel)	-	1000	-
Cl. 6(Molybdenum)	-	1000	-
Cl. 6(Chromium)	-	1000	-
Cl. 6(Phosphorus)	-	1000	-
Cl. 6(Sulphur)	-	1000	-
Cl. 6(Manganese)	-	1000	-
Cl. 6(Silicon)	-	1000	-
Cl. 6(Carbon)	-	1000	Testing charges for ( Chromium + Nickel + molybdenum + Copper + Vanadium ) are Rs. 900/-
5(Freedom from defectes)	-	1000	-
8.1(Tensile strength)	-	1200	Testing charges for Yield stress are Rs. 1200/-
8.1(Elongation)	-	1200	Testing charges for Limiting ruling section are Rs. 2000/-
8.1(Izod Impact)	-	2000	-
9(Diameter)	-	1500	Total Testing Charges for Dimensions is INR 1500/-
9(Out of Round)	-	0	As Above
9(Straightness)	-	0	As Above
Cl. 6(Vanadium)	-	0	As Above
Cl. 6(Copper)	-	0	As Above
Cl. 6(Nickel)	-	0	As Above
Cl. 6(Molybdenum)	-	0	As Above
Cl. 6(Chromium)	-	0	As Above
Cl. 6(Phosphorus)	-	0	As Above
Cl. 6(Sulphur)	-	0	As Above
Cl. 6(Manganese)	-	0	As Above
Cl. 6(Silicon)	-	0	As Above
Cl. 6(Carbon)	-	0	As Above
5(Freedom from defectes)	-	0	As Above
8.1(Tensile strength)	-	0	As Above
8.1(Elongation)	-	0	As Above
8.1(Izod Impact)	-	0	As Above
9(Diameter)	-	0	As Above
9(Out of Round)	-	0	As Above
9(Straightness)	-	0	As Above
Cl. 6(Vanadium)	-	0	As Above
Cl. 6(Copper)	-	0	As Above
Cl. 6(Nickel)	-	0	As Above
Cl. 6(Molybdenum)	-	0	As Above
Cl. 6(Chromium)	-	0	As Above
Cl. 6(Phosphorus)	-	0	As Above
Cl. 6(Sulphur)	-	0	As Above
Cl. 6(Manganese)	-	0	As Above
Cl. 6(Silicon)	-	0	As Above
Cl. 6(Carbon)	-	0	As Above
5(Freedom from defectes)	-	0	As Above
8.1(Tensile strength)	-	0	As Above
8.1(Elongation)	-	0	As Above
8.1(Izod Impact)	-	0	As Above
9(Diameter)	-	0	As Above
9(Out of Round)	-	0	As Above
9(Straightness)	-	0	As Above

31 Dec, 2026

-
Included w.e.f 23.12.2024

IS 11686 (1997)

Isopropyl alcohol, food grade - Specification (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Description)	-	1500	-
4 - Table 1 -(i)(Purity of Isopropyl alcohol percent by mass)	-	3500	-
4 - Table 1 -(ii)(Relative density)	-	2500	-
4 - Table 1 -(iii)(Colour)	-	2000	-
4 - Table 1 -(iv)(Distillation range)	-	3500	-
4 - Table 1 -(v)(Acidity percent by mass)	-	1500	-
4 - Table 1 -(vi)(Non-volatile matter)	-	1500	-
4 - Table 1 -(vii)(Aldehydes and ketones percent by mass)	-	2500	-
4 - Table 1 -(viii)(Substance reducing permanganate)	-	1500	-
4 - Table 1 -(ix)(Heavy metals)	-	2000	-
4 - Table 1 -(x)(Moisture percent by mass)	-	2000	-
5.1(PACKING)	-	0	Test not applicable
5.2(STORAGE)	-	0	Test not applicable
5.3(MARKING)	-	0	Test not applicable
3(Description)	-	-	-
4 - Table 1 -(i)(Purity of Isopropyl alcohol percent by mass)	-	-	-
4 - Table 1 -(ii)(Relative density)	-	-	-
4 - Table 1 -(iii)(Colour)	-	-	-
4 - Table 1 -(iv)(Distillation range)	-	-	-
4 - Table 1 -(v)(Acidity percent by mass)	-	-	-
4 - Table 1 -(vi)(Non-volatile matter)	-	-	-
4 - Table 1 -(vii)(Aldehydes and ketones percent by mass)	-	-	-
4 - Table 1 -(viii)(Substance reducing permanganate)	-	-	-
4 - Table 1 -(ix)(Heavy metals)	-	-	-
4 - Table 1 -(x)(Moisture percent by mass)	-	-	-
5.1(PACKING)	-	-	-
5.2(STORAGE)	-	-	-
5.3(MARKING)	-	-	-

31 Dec, 2026

-
Included w.e.f.07.11.2024

IS 10301 (1982)

Specification for isopropyl alcohol for cosmetic industry

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	-
2.2(Odour)	-	1000	-
2.1 - Table 1 - (i)(Relative density)	-	2500	-
2.1 - Table 1 - (ii)(Distillation range)	-	3500	-
2.1 - Table 1 - (iii)(Residue, Max)	-	2500	-
2.1 - Table 1 - (iv)(Acidity, Max)	-	2000	-
2.1 - Table 1 - (v)(Aldehydes and Ketons, Max)	-	3500	-
2.1 - Table 1 - (vi)(Water content, Max)	-	3000	-
3(Packing and Marking)	-	0	Test Not Applicable

31 Dec, 2026

-
Included w.e.f.07.11.2024

IS 2630 (2021)

NITROBENZENE SPECIFICATION

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1(Description)	-	1000	-
Clause 3.2 Table 1(i)(Relative density at 27 °C/27 °C)	-	2500	-
Clause 3.2 Table 1(ii)(Distillation range at 760 mm Hg.)	-	4000	-
Clause 3.2 Table 1(iii)(Crystallization point °C, Min)	-	3000	-
Clause 3.2 Table 1(iv)(Moisture, percent by Mass, Max)	-	2500	-
Clause 3.2 Table 1(v)(pH, Min)	-	1500	-
Clause 3.2 Table 1(vi)(Dinitrobenzene, percent by Mass, Max)	-	3000	-
Clause 3.2 Table 1(vii)(Assay, percent by Mass, Max)	-	4000	-
Clause 3.2 Table 1(viii)(Low boilers (Benzene) percent by Mass, Max)	-	3500	-
Clause 3.2 Table 1(ix)(High boilers (o-nitrotoluene, p-nitrotoluene, p-nitrochlorobenzene, and m-dinitrobenzene), percent by mass, Max)	-	4000	-
Clause 4.1(Packing)	-	0	Test not applicable
Clause 4.2(Marking)	-	0	Test not Applicable
Clause 3.1(Description)	-	1000	-
Clause 3.2 Table 1(i)(Relative density at 27 °C/27 °C)	-	2500	-
Clause 3.2 Table 1(ii)(Distillation range at 760 mm Hg.)	-	4000	-
Clause 3.2 Table 1(iii)(Crystallization point °C, Min)	-	3000	-
Clause 3.2 Table 1(iv)(Moisture, percent by Mass, Max)	-	2500	-
Clause 3.2 Table 1(v)(pH, Min)	-	1500	-
Clause 3.2 Table 1(vi)(Dinitrobenzene, percent by Mass, Max)	-	3000	-
Clause 3.2 Table 1(vii)(Assay, percent by Mass, Max)	-	4000	-
Clause 3.2 Table 1(viii)(Low boilers (Benzene) percent by Mass, Max)	-	3500	-
Clause 3.2 Table 1(ix)(High boilers (o-nitrotoluene, p-nitrotoluene, p-nitrochlorobenzene, and m-dinitrobenzene), percent by mass, Max)	-	4000	-
Clause 4.1(Packing)	-	0	Test not applicable
Clause 4.2(Marking)	-	0	Test not applicable

31 Dec, 2026

-
Included w.e.f 09.10.2024

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
5.1 Table 1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	2000	-
6(FREEDOM FROM DEFECTS)	-	2000	-
7(Size and Tolerances)	-	3000	-
Clause 5.1(Molybdenum)	-	0	(Repeat entry)
Clause 5.1(Nickel)	-	0	(Repeat entry)
Clause 5.1(Chromium)	-	0	(Repeat entry)
Clause 5.1(Silicon)	-	0	(Repeat entry)
Clause 5.1(Phosphorous)	-	0	(Repeat entry)
Clause 5.1(Sulphur)	-	0	(Repeat entry)
Clause 5.1(Manganese)	-	0	(Repeat entry)
Clause 5.1(Carbon)	-	0	(Repeat entry)
5.1 Table 1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
6(FREEDOM FROM DEFECTS)	-	0	(Repeat entry)
7(Size and Tolerances)	-	0	(Repeat entry)
Clause 5.1(Molybdenum)	-	0	(Repeat entry)
Clause 5.1(Nickel)	-	0	(Repeat entry)
Clause 5.1(Chromium)	-	0	(Repeat entry)
Clause 5.1(Silicon)	-	0	(Repeat entry)
Clause 5.1(Phosphorous)	-	0	(Repeat entry)
Clause 5.1(Sulphur)	-	0	(Repeat entry)
Clause 5.1(Manganese)	-	0	(Repeat entry)
Clause 5.1(Carbon)	-	0	(Repeat entry)
5.1 Table 1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
5.1 Table 1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	(Repeat entry)
6(FREEDOM FROM DEFECTS)	-	0	(Repeat entry)
7(Size and Tolerances)	-	0	(Repeat entry)
Clause 5.1(Molybdenum)	-	0	(Repeat entry)
Clause 5.1(Nickel)	-	0	(Repeat entry)
Clause 5.1(Chromium)	-	0	(Repeat entry)
Clause 5.1(Silicon)	-	0	(Repeat entry)
Clause 5.1(Phosphorous)	-	0	(Repeat entry)
Clause 5.1(Sulphur)	-	0	(Repeat entry)
Clause 5.1(Manganese)	-	0	(Repeat entry)
Clause 5.1(Carbon)	-	0	(Repeat entry)

31 Dec, 2026

-
Included w.e.f.21.11.2024

IS 14364 (2024)

Quaternary Ammonium Compound Based Surface Cleaner, Liquid ï¿½ Specification ( First Revision )

25800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Description)	-	800	Total testing charges including Keeping Quality are Rs. 25,800/- Testing charges excluding Keeping Quality are Rs. 12,900/-
Cl-4.3(Odour)	-	800	-
Cl-4.4(Colour)	-	800	-
Cl-4.5(Stability on Dilution)	-	1500	-
Cl-4.6(Cleaning Property)	-	1500	-
Cl-4.7(Applicability)	-	1500	-
Cl-4.8(Keeping Quality)	-	12900	-
Cl-4.8 & 4.9, Table-1 (i)(Total non-volatile matter, percent by mass, Min)	-	2000	-
Cl-4.8 & 4.9, Table-1 (ii)(pH)	-	1500	-
Cl-4.8 & 4.9, Table-1 (iii)(QAC content, percent by mass, Min)	-	2000	-
Cl-4.2(Composition)	-	500	-
Cl-6(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	-
6.1(Silicon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	Testing charges for Copper %
6.1(Manganese %)	-	1500	Testing charges for Niobium, Vanadium & Titanium
Cl 8(Freedom from defects)	-	500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	500	Testing charges for Diameter
Cl. 9(Out of Shape)	-	500	-
Cl 8(Workmanship)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
Cl 8(Workmanship)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
6.1(Phosphorus %)	-	0	NA
6.1(Sulphur %)	-	0	NA
6.1(Silicon %)	-	0	NA
6.1( Aluminium %)	-	0	NA
6.1(Carbon %)	-	0	NA
6.1(Manganese %)	-	0	NA
6.1(Phosphorus %)	-	0	NA
6.1(Sulphur %)	-	0	NA
6.1(Silicon %)	-	0	NA
6.1( Aluminium %)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
Cl 8(Workmanship)	-	0	NA
Cl 8(Workmanship)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(By Calculation)	-	0	NA
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(By Calculation)	-	0	NA
Table 1 Note 3(Copper)	-	0	NA
Amendment 1(Niobium)	-	0	NA
Amendment 1(Vanadium)	-	0	NA
Amendment 1(Titanium)	-	0	NA
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	0	NA
9.1(Diameter - SOP-MT-23)	-	0	NA
9.3(Out of Shape - SOP-MT-23)	-	0	NA
11(Marking)	-	0	NA
Table 1 Note 3(Copper)	-	0	NA
Amendment 1(Niobium)	-	0	NA
Amendment 1(Vanadium)	-	0	NA
Amendment 1(Titanium)	-	0	NA
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	0	NA

31 Dec, 2026

-
Included w.e.f.21.11.2024

IS 1997 (2008)

Laboratory glassware - Burettes (Third Revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Maximum permissible errors)	-	3500	Testing charges for Maximum permissible errors
11(Markings )	-	2000	Testing charges for Material (Hydrolytic resistance Test)
5.1(Class of Accuracy)	-	1500	Testing charges for Colored stripe
5.2(Types)	-	800	Testing charges for Dimensions Overall length
8(Construction)	-	800	Testing charges for Subdivision
Table 2(i) Scale length )	-	1000	Testing charges for Scale length
Table 3( ii) Overall length )	-	800	Testing charges for Distance of zero line from top of burette
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	800	Testing charges for Distance of lowest graduation line from top of stopcock
Table 6(v) Length of tube of uniform bore below graduation line )	-	800	Testing charges for Length of tube of uniform bore below lowest graduation line
Table 7(vi) Distance of end of jet from underside of stopcock )	-	800	Testing charges for Distance of end of jet from underside of stopcock
8.2( c) Top of burette )	-	800	Testing charges for Top of burette
8.3(d) Stopcock and similar devices)	-	800	Testing charges for Stopcock and similar devices
8.4(e) Stop Cock Leakage)	-	1500	Testing charges for Stop Cock Leakage
8.5( f) Delivery jet)	-	1000	Testing charges for Delivery jet
8.6(g) Delivery time )	-	1500	Testing charges for Delivery time
8.6(g) Delivery time )	-	800	Testing charges for Waiting time
9.1(a) Graduations patterns )	-	500	Testing charges for Graduations patterns
9.2(Position of graduation line)	-	800	Testing charges for Position of graduation line
9.3(c) Marking of graduation lines )	-	1000	Testing charges for Marking of graduation lines
11(Markings )	-	800	Testing charges for Markings
12(. Visibility of graduation line)	-	700	Testing charges for Visibility of graduation line
Table 4(iii) Distance of Zero line from top of burette )	-	0	NA
9(Graduations, figuring and patterns )	-	0	NA
5.1(Class of Accuracy)	-	0	NA
5.2(Types)	-	0	NA
6.1(Maximum permissible errors)	-	0	NA
8(Construction)	-	0	NA
Table 2(i) Scale length )	-	0	NA
Table 3( ii) Overall length )	-	0	NA
Table 4(iii) Distance of Zero line from top of burette )	-	0	NA
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	0	NA
Table 6(v) Length of tube of uniform bore below graduation line )	-	0	NA
Table 7(vi) Distance of end of jet from underside of stopcock )	-	0	NA
8.2( c) Top of burette )	-	0	NA
8.3(d) Stopcock and similar devices)	-	0	NA
8.4(e) Stop Cock Leakage)	-	0	NA
8.5( f) Delivery jet)	-	0	NA
8.6(g) Delivery time )	-	0	NA
8.6(g) Delivery time )	-	0	NA
9(Graduations, figuring and patterns )	-	0	NA
9.1(a) Graduations patterns )	-	0	NA
9.2(Position of graduation line)	-	0	NA
9.3(c) Marking of graduation lines )	-	0	NA
12(. Visibility of graduation line)	-	0	NA
11(Markings )	-	0	NA
5.1(Class of Accuracy)	-	0	NA
5.2(Types)	-	0	NA
6.1(Maximum permissible errors)	-	0	NA
8(Construction)	-	0	NA
Table 2(i) Scale length )	-	0	NA
Table 3( ii) Overall length )	-	0	NA
Table 4(iii) Distance of Zero line from top of burette )	-	0	NA
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	0	NA
Table 6(v) Length of tube of uniform bore below graduation line )	-	0	NA
Table 7(vi) Distance of end of jet from underside of stopcock )	-	0	NA
8.2( c) Top of burette )	-	0	NA
8.3(d) Stopcock and similar devices)	-	0	NA
8.4(e) Stop Cock Leakage)	-	0	NA
8.5( f) Delivery jet)	-	0	NA
8.6(g) Delivery time )	-	0	NA
8.6(g) Delivery time )	-	0	NA
9(Graduations, figuring and patterns )	-	0	NA
9.1(a) Graduations patterns )	-	0	NA
9.2(Position of graduation line)	-	0	NA
9.3(c) Marking of graduation lines )	-	0	NA
12(. Visibility of graduation line)	-	0	NA

31 Dec, 2026

-
Included w.e.f.21.11.2024

IS 2618 (2016)

Laboratory glassware - Test tubes (Third Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4, Table no. 1(i)("Water resistance ")	-	2000	-
Cl. No. 4, Table no. 1(ii)(Acid resistance)	-	2000	-
Cl. No. 4, Table no. 1(ii)(Alkali resistance)	-	2000	-
Cl. No. 5, Table no.2 to 4(Construction and dimensions)	-	2500	Testing Charges for (Top -Open end, Length, External diameter, Wall thickness, Wall thickness of bottom) are Rs. 500/- for each parameter.
Cl. No. 6("Marking ")	-	0	Testing charges for Material – Coefficient of Thermal Expansion are Rs. 3000/-

31 Dec, 2026

-
Included w.e.f.21.11.2024

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	0	NA
3(Class of Accuracy)	-	2000	Testing charges for Maximum Permissible Error
5.1(Material)	-	2000	Testing charges for Material (water resistance test)
6.1.2(Marking)	-	1000	Testing charges for Shape
5.6&7(Graduation line & Visibility )	-	500	Testing charges for Bulb
5.4(vii) Overall length, L)	-	500	Testing charges for Dimension Overall length
5.5(Delivery Time)	-	500	Testing charges for Internal diameter at the graduation line
5.4(viii) Length of suction tube, L1 )	-	500	Testing charges for Length of suction tube
5.4(ix) Length of delivery tube, L2 )	-	500	Testing charges for Length of delivery tube,
5.5(Delivery Time)	-	500	Testing charges for External diameter of delivery tube
5.4(xi) External dia. of bulb D2 )	-	500	Testing charges for External diameter of bulb
5.4(xii) External dia. of delivery tube D3 )	-	500	Testing charges for External diameter of tube
5.4(i) Distance of graduation line from top of pipette.)	-	500	Testing charges for Distance of graduation line from top of pipette
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	500	Testing charges for Distance from graduation line to top of bulb
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	500	Testing charges for Distance from graduation line to tip of jet
5.4(iv) Wall thickness)	-	500	Testing charges for Wall thickness
5.4(xii) External dia. of delivery tube D3 )	-	0	NA
5.4(xi) External dia. of bulb D2 )	-	500	Testing charges for Distance from lower graduation line to bottom of bulb
5.4(x) Internal dia. of suction tube D1 )	-	500	Testing charges for Top of pipette
5.4(ix) Length of delivery tube, L2 )	-	500	Testing charges for Delivery jet
5.4(viii) Length of suction tube, L1 )	-	0	NA
5.4(vii) Overall length, L)	-	0	NA
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	NA
5.5(Delivery Time)	-	1500	Testing charges for Delivery Time
5.4(v) Dia. of safety bulb (if provided ))	-	500	Testing charges for Waiting time
5.6&7(Graduation line & Visibility )	-	1000	Testing charges for Graduation line
6.1.2(Marking)	-	500	Testing charges for Visibility of graduation lines, figures and inscriptions
5.4(b) Other pipettes)	-	1000	Testing charges for Colour coding
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	NA
5.4(iv) Wall thickness)	-	0	NA
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	NA
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	NA
5.4(i) Distance of graduation line from top of pipette.)	-	0	NA
5.3(Workmanship & Finish)	-	0	NA
5.2(Pattern of Pipette)	-	0	NA
5.1.1(Limit of Alkalinity)	-	0	NA
5.1(Material)	-	0	NA
5.1(Material)	-	0	NA
4.2(Accuracy)	-	0	NA
4.1(Nominal capacities)	-	0	NA
3(Class of Accuracy)	-	0	NA
6.1.1&3(Marking)	-	0	NA
6.1.2(Marking)	-	0	NA
5.6&7(Graduation line & Visibility )	-	0	NA
5.5(Delivery Time)	-	0	NA
5.5(Delivery Time)	-	0	NA
5.4(xii) External dia. of delivery tube D3 )	-	0	NA
5.4(xi) External dia. of bulb D2 )	-	0	NA
5.4(x) Internal dia. of suction tube D1 )	-	0	NA
5.4(ix) Length of delivery tube, L2 )	-	0	NA
5.4(viii) Length of suction tube, L1 )	-	0	NA
5.4(vii) Overall length, L)	-	0	NA
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	NA
5.4(v) Dia. of safety bulb (if provided ))	-	0	NA
5.4(b) Other pipettes)	-	0	NA
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	NA
5.4(iv) Wall thickness)	-	0	NA
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	NA
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	NA
5.4(i) Distance of graduation line from top of pipette.)	-	0	NA
5.3(Workmanship & Finish)	-	0	NA
5.2(Pattern of Pipette)	-	0	NA
5.1.1(Limit of Alkalinity)	-	0	NA
5.1(Material)	-	0	NA
5.1(Material)	-	0	NA
4.2(Accuracy)	-	0	NA
4.1(Nominal capacities)	-	0	NA
3(Class of Accuracy)	-	0	NA
6.1.1&3(Marking)	-	0	NA
5.5(Delivery Time)	-	0	NA
5.4(x) Internal dia. of suction tube D1 )	-	0	NA
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	NA
5.4(v) Dia. of safety bulb (if provided ))	-	0	NA
5.4(b) Other pipettes)	-	0	NA
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	NA
5.3(Workmanship & Finish)	-	0	NA
5.2(Pattern of Pipette)	-	0	NA
5.1.1(Limit of Alkalinity)	-	0	NA
5.1(Material)	-	0	NA
4.2(Accuracy)	-	0	NA
4.1(Nominal capacities)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 20.11.2024

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

13600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	0	-
Table-1(Overall height)	-	800	-
Table-1(Distance from top of scale to top of cylinder)	-	800	-
Table-1(Internal height to highest graduation line)	-	800	-
Table-1(Sub-divisions)	-	800	-
Table-1(capacity at lowest graduation line)	-	800	-
Cl-9.1(Wall thickness)	-	700	-
Cl-9.2(Stability)	-	700	-
Cl-9.3(Base)	-	700	-
Cl-9.4(Rim and spout)	-	700	-
Cl-9.5(Neck and stopper)	-	700	-
Cl-10.1(Graduation)	-	700	-
Cl-10.2(Figuring)	-	700	-
Cl-11(Accuracy testing)	-	700	Testing charges for Marking are Rs. 700/-
Cl-13(Visibility of graduation lines, figures and marking)	-	1000	Testing charges for Visibility of graduation lines, number and inscriptions are Rs. 1000/-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	1000	Testing charges for Material (Hydrolytic resistance Test) are Rs. 1000/-
Cl-9.6, Table-2(Sub divisions)	-	2000	Testing charges for Maximum permissible errors are Rs. 2000/-
Cl-9.6, Table-2(Nominal capacity)	-	0	NA
Cl-9.6, Table-2(Overall height)	-	0	NA
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	0	NA
Cl-9.6, Table-2(Internal height to highest graduation line)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 30.10.2024

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	2500	Testing charges for Material as per clause no. 8.1 (Coefficient of Thermal expansion) are Rs. 1500/- Testing charges for Material as per clause no. 8.1 (Hydrolytic resistance) are Rs. 1000/-
Table 1(Wall Thickness)	-	800	-
8.3(Shape)	-	800	-
8.4(Neck)	-	800	-
8.5(Stopper)	-	700	-
8.6(Dimensions)	-	0	-
Table 1(Nominal Capacity)	-	0	-
Table 1(Internal Neck Diameter)	-	800	-
Table 1(Distance of graduation line)	-	800	-
Table-2(Nominal capacity)	-	2500	Testing charges for Maximum Permissible error are Rs. 2500/-.
Table 1(Overall Height)	-	800	-
Table 1(Bulb Diameter)	-	800	-
Table 1(Base Diameter)	-	800	-
Table 1(Ground joint k4)	-	800	-
Table 1(Ground joint k6)	-	0	Testing charges already mentioned above.
9.0(Graduation Line)	-	800	-
Table-2(Internal neck diameter)	-	800	Testing charges for Marking and Designation
12.1(Visibility of graduation line, figures and marking)	-	1000	-
12.2(Visibility of graduation line, figures and marking)	-	0	NA
Table-2(Distance of graduation line 1))	-	0	NA
Table-2(Overall height 2))	-	0	NA
Table-2(Bulb diameter)	-	0	NA
Table-2(Base diameter)	-	0	NA
Table-2(Wall thickness)	-	0	NA
Table-2(Ground joint 3) k4)	-	0	NA
Table-2(Ground joint 3) k6)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 30.10.2024

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Phosphorus %)	-	600	-
6.2(Sulphur %)	-	600	-
7(Dimensions)	-	500	Dimensions and tolerances of round wires and tapes
7(Dimensions)	-	500	Dimensions and tolerances of formed wire
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	800	Testing charges for Tensile test and Elongation test are Rs. 800/-.
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	0	Testing charges for Tensile test and Elongation test are Rs. 800/- already mentioned above.
8.2(Mechanical Properties (as per IS 1717))	-	600	Testing charges for Torsion test.
8.3(Mechanical Properties (as per IS 1755))	-	400	Testing charges for Wrapping test.
9.1(Galvanizing Requirements )	-	500	Testing charges for Mass of Zinc Coating.
9.2(Galvanizing Requirements )	-	400	Testing charges for Uniformity of Zinc Coating.
9.3(Galvanizing Requirements )	-	400	Testing charges for Adhesion test.
11(Freedom from defects)	-	400	-
14 (a)(Marking)	-	0	NA
14 (b)(Marking)	-	0	NA
14 (c)(Marking)	-	0	NA
14 (d)(Marking)	-	0	NA
14 (e)(Marking)	-	0	NA
14 (f)(Marking)	-	0	NA
14 (g)(Marking)	-	0	NA
14.2(Marking)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	0	NA
14(Marking)	-	0	NA
14 (a)(Marking)	-	0	NA
14 (b)(Marking)	-	0	NA
14 (c)(Marking)	-	0	NA
14 (d)(Marking)	-	0	NA
14 (e)(Marking)	-	0	NA
14 (f)(Marking)	-	0	NA
14 (g)(Marking)	-	0	NA
14.2(Marking)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
11(Freedom from defects)	-	0	NA
9.1(Galvanizing Requirements )	-	0	NA
9.2(Galvanizing Requirements )	-	0	NA
9.3(Galvanizing Requirements )	-	0	NA
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	0	NA
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	0	NA
8.2(Mechanical Properties (as per IS 1717))	-	0	NA
8.3(Mechanical Properties (as per IS 1755))	-	0	NA
Clause 6.1, Table-1(Sulphur)	-	0	NA
Clause 6.1, Table-1(Phosphorus)	-	0	NA
6.2( Nitrogen%)	-	0	NA
6.2(Phosphorus %)	-	0	NA
6.2(Sulphur %)	-	0	NA
6.2( Nitrogen%)	-	0	NA
6.2(Phosphorus %)	-	0	NA
6.2(Sulphur %)	-	0	NA
6.2( Nitrogen%)	-	0	NA

31 Dec, 2026

-
Included w.e.f.21.11.2024 Exclusion CL 8.4 Resistance test (for rand & formed wires)

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	-
Cl 9(Tensile Test On UTM)	-	800	-
9.2(Wrapping Test)	-	500	-
9.3(Bend test)	-	500	-
Cl 11(Workmanship)	-	800	Testing charges for Mass of Zinc Coating
Cl 11(Workmanship)	-	500	Testing charges for Uniformity of Zinc Coating
11(Coating test)	-	500	Testing charges for Adhesion Test
Cl 13(Workmanship)	-	500	Testing charges for Freedom from defects
10(Finish)	-	300	-
6 AND AS PER IS 7887(ALUMINIUM)	-	500	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	500	-
6 AND AS PER IS 7887(SULPHUR)	-	500	-
6 AND AS PER IS 7887(MANGANESE)	-	500	-
6 AND AS PER IS 7887(SILICON)	-	500	-
6 AND AS PER IS 7887(CARBON)	-	500	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	500	Testing charges for Copper
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
Cl 11(Workmanship)	-	0	NA
Cl 13(Workmanship)	-	0	NA
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
7 & 8(Ovality)	-	0	NA
7 & 8(Diameter)	-	0	NA
13(Freedom from defects)	-	0	NA
Cl 13(Workmanship)	-	0	NA
Cl 11(Workmanship)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
Cl 11(Workmanship)	-	0	NA
Cl 13(Workmanship)	-	0	NA
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	NA
Clause 6 and Note 3 of IS 7887(Copper)	-	0	NA
14(Packing)	-	0	NA
15(Marking)	-	0	NA
Clause 6 and Note 3 of IS 7887(Copper)	-	0	NA

31 Dec, 2026

-
Included w.e.f.21.11.2024

IS 6406 (2024)

Brilliant blue FCF, food grade - Specification (Third Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 and 7 Table 1 (i)(Total dye content - IS 6406:2024)	-	1000	-
3.2 and 7 Table 1 (ii)- a)(Loss on drying at 135° C - IS 1699: 1995)	-	1500	-
3.2 and 7 Table 1 (ii)- b)(Chlorides and sulphates - IS 1699: 1995)	-	1000	-
3.2 and 7 Table 1 (iii)(Water Insoluble Matter- IS 1699:1995)	-	1000	-
3.2 and 7 Table 1 (iv)(Combined ether extracts- IS 1699:1995)	-	1500	-
3.2 and 7 Table 1 (v)(Subsidiary dyes- - IS 6406: 2024)	-	1500	-
3.2 and 7 Table 1 (vi)- a)(Dye intermediates a)- O-sulpho-benzaldehyde - IS 6406: 2024)	-	2500	Testing Charges for Dye intermediates (a) , (b) and (c) are Rs. 2500/-
3.2 and 7 Table 1 (vi)- b)(Dye intermediates b) - N-N’ ethyl-benzyl-aniline-3-sulphonic acid - IS 6406: 2024)	-	0	Testing Charges for Dye intermediates (a) , (b) and (c) are Rs. 2500/- already mentioned above.
3.2 and 7 Table 1 (vi)- c)(Dye intermediates -c)- Leuco Base - IS 6406: 2024)	-	0	Testing Charges for Dye intermediates (a) , (b) and (c) are Rs. 2500/- already mentioned above.
3.2 and 7 Table 1 (vii)(Unsulphonated primary aromatic amines - IS 6406: 2024)	-	1500	-
3.2 and 7 Table 1 (viii)(Lead - IS 1699:1995)	-	1500	-
3.2 and 7 Table 1 (ix)(Arsenic- IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (x)(Mercury - IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (xi)(Copper - IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (xii)(Chromium - IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (xiii)(Cadmium - IS 1699:1995)	-	800	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 2558 (2024)

Ponceau 4R, food grade - Specification (Third Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 and 7 Table 1 (i)(Total dye content - IS 2558:2024)	-	1000	-
3.2 and 7 Table 1 (ii)(Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-	1500	-
3.2 and 7 Table 1 (iii)(Water Insoluble Matter- IS 1699:1995)	-	1000	-
3.2 and 7 Table 1 (iv)(Combined ether extracts- IS 1699:1995)	-	1000	-
3.2 and 7 Table 1 (v)(Subsidiary dyes- - IS 2558:2024)	-	1500	-
3.2 and 7 Table 1 (vi)(Dye intermediates - IS 2558:2024)	-	1500	-
3.2 and 7 Table 1 (vii)(Unsulphonated primary aromatic amines - IS 2558:2024)	-	1500	-
3.2 and 7 Table 1 (viii)(Lead - IS 1699:1995)	-	1500	-
3.2 and 7 Table 1 (ix)(Arsenic- IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (x)(Mercury - IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (xi)(Copper - IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (xii)(Chromium - IS 1699:1995)	-	800	-
3.2 and 7 Table 1 (xiii)(Cadmium - IS 1699:1995)	-	800	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 1698 (2024)

Indigo carmine, food grade - Specification (Third Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Test for Colour- IS 1698:2024)	-	700	-
3.3 and 7 Table 1 (i)(Total dye content - IS 1698:2024)	-	1000	-
3.3 and 7 Table 1 (ii)(Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-	1500	-
3.3 and 7 Table 1 (iii)(Water Insoluble Matter- IS 1698:2024)	-	1000	-
3.3 and 7 Table 1 (iv)(Combined ether extracts- IS 1698:2024)	-	1000	-
3.3 and 7 Table 1 (v)(Subsidiary dyes- - IS 1698:2024)	-	1500	-
3.3 and 7 Table 1 (vi)(Isatin sulphonic acid- IS 1698:2024)	-	1500	-
3.3 and 7 Table 1 (vii)(Dye intermediates (organic compounds other than colouring matters)- IS 1698:2024)	-	1500	-
3.3 and 7 Table 1 (viii)(Unsulphonated primary aromatic amines -IS 1698:2024)	-	1500	-
3.3 and 7 Table 1 (ix)(Lead - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (x)(Arsenic- IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xi)(Mercury - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xii)(Copper - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xiii)(Chromium - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xiv)(Cadmium - IS 1699:1995)	-	800	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 1697 (2024)

Erythrosine, food grade - Specification (Third Revision)

18100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1 and 7 Table 1 (i)(Total dye content - IS 1697:2024)	-	1000	-
3.1 and 7 Table 1 (ii)(Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-	1500	-
3.1 and 7 Table 1 (iii)(Water Insoluble Matter- IS 1699:1995)	-	1000	-
3.1 and 7 Table 1 (iv)(Ether Extractable matter (alkaline)- IS 1699:1995)	-	1000	-
3.1 and 7 Table 1 (v)(Inorganic Iodide - IS 1697:2024)	-	1000	-
3.1 and 7 Table 1 (vi)(Subsidiary colouring matters except fluoroscein- IS 1697:2024)	-	1500	-
3.1 and 7 Table 1 (vii)(Fluoroscein- IS 1697:2024)	-	1500	-
3.1 and 7 Table 1 (viii) - a)(organic compounds other than colouring matter a) Tri-idoresorcinol- IS 1697:2024)	-	2500	Testing Charges for Organic Compounds other than colouring matter (a) & (b) are Rs. 2500/-.
3.1 and 7 Table 1 (viii)- b)(organic compounds other than colouring matter- b) 2-(2,4-dihydroxy-3,5-di-idobenzoyl) benzoic acid- IS 1697:2024)	-	0	Testing Charges for Organic Compounds other than colouring matter (a) & (b) are Rs. 2500/- already mentioned above.
3.1 and 7 Table 1 (ix)(Unsulphonated primary aromatic amines- IS 1697:2024)	-	1500	-
3.1 and 7 Table 1 (x)(Lead - IS 1699:1995)	-	800	-
3.1 and 7 Table 1 (xi)(Arsenic- IS 1699:1995)	-	800	-
3.1 and 7 Table 1 (xii)(Mercury - IS 1699:1995)	-	800	-
3.1 and 7 Table 1 (xiii)(Copper - IS 1699:1995)	-	800	-
3.1 and 7 Table 1 (xiv)(Chromium - IS 1699:1995)	-	800	-
3.1 and 7 Table 1 (xv)(Cadmium - IS 1699:1995)	-	800	-
3.1 and 7 Table 1 (xvi)(Zinc - IS 1699:1995)	-	800	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 1695 (2024)

Sunset yellow FCF, food grade - Specification (Fourth Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Test for Colour- IS 1695:2024)	-	700	-
3.3 and 7 Table 1 (i)(Total dye content - IS 1695:2024)	-	1000	-
3.3 and 7 Table 1 (ii)(Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-	1500	-
3.3 and 7 Table 1 (iii)(Water Insoluble Matter- IS 1699:1995)	-	1000	-
3.3 and 7 Table 1 (iv)(Combined ether extracts- IS 1699:1995)	-	1000	-
3.3 and 7 Table 1 (v)- a)(Subsidiary dyes- a) lower sulphonated dyes including traces of orange II - IS 1695:2024)	-	2000	Testing Charges for Subsidiary dyes (a) & (b) are Rs. 2000/-
3.3 and 7 Table 1 (v)- b)(Subsidiary dyes - b) colours other than trisodium 2- hydroxy-1-(4-sulphonatophenyl azo), naphthalene-3,6- disulphonate - IS 1695:2024)	-	0	Testing Charges for Subsidiary dyes (a) & (b) are Rs. 2000/- already mentioned above.
3.3 and 7 Table 1 (vi)(Dye intermediates (organic compounds other than colouring matters)- IS 1695:2024)	-	1500	-
3.3 and 7 Table 1 (vii)(Unsulphonated primary aromatic amines -IS 1695:2024)	-	1500	-
3.3 and 7 Table 1 (viii)(Sudan I (1-(phenylazo)-2-naphthalenol)- IS 1695:2024)	-	1500	-
3.3 and 7 Table 1 (ix)(Lead - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (x)(Arsenic- IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xi)(Mercury - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xii)(Copper - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xiii)(Chromium - IS 1699:1995)	-	800	-
3.3 and 7 Table 1 (xiv)(Cadmium - IS 1699:1995)	-	800	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 1694 (2024)

Tartrazine, food grade - Specification (Third Revision)

15300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1 Table 1 (i)(Total dye content - IS 1694:2024)	-	1500	-
3.1 Table 1 (ii)(Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-	2000	-
3.1 Table 1 (iii)(Water Insoluble Matter- IS 1699:1995)	-	1000	-
3.1 Table 1 (iv)(Combined ether extracts- IS 1699:1995)	-	1500	-
3.1 Table 1 (v)(Subsidiary dyes - IS 1694:2024)	-	1500	-
3.1 Table 1 (vi)(Dye intermediates IS 1694:2024)	-	1500	-
3.1 Table 1 (vii)(Lead - IS 1699:1995)	-	800	-
3.1 Table 1 (viii)(Arsenic- IS 1699:1995)	-	800	-
3.1 Table 1 (ix)(Mercury - IS 1699:1995)	-	800	-
3.1 Table 1 (x)(Copper - IS 1699:1995)	-	800	-
3.1 Table 1 (xi)(Chromium - IS 1699:1995)	-	800	-
3.1 Table 1 (xii)(Cadmium - IS 1699:1995)	-	800	-
3.1 Table 1 (xiii)(Unsulphonated primary aromatic amines (as aniline)- IS 1699:1995)	-	1500	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

IS 13186 (2024)

Citric Acid, Food Grade â Specification (First Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1("Description IS 13186 : 2024")	-	800	Total testing charges are Rs. 13500/- (Excluding ECO mark requirements). Testing charges for ECO mark requirements are Rs. 5500/- only.
3.2.1("Identification Test (Solubility) IS 13186 : 2024")	-	1500	Testing charges for Identification test as per clause no. 3.2.1 , 3.2.2 are Rs. 1500/-
3.2.2("Identification Test IS 13186 : 2024")	-	0	Testing charges for Identification test as per clause no. 3.2.1 , 3.2.2 are Rs. 1500/- already mentioned above
3.3Table 1 (i)("Purity as C₆H₈O₇ IS 13186 : 2024")	-	2500	-
3.3Table 1 (ii)("Moisture( Anhydrous) IS 13186 : 2024")	-	1500	-
3.3Table 1 (ii)("Moisture ( Monohydrate) IS 13186 : 2024")	-	0	Testing charges already mentioned above
3.3Table 1 (iii)("Sulphated ash IS 13186 : 2024")	-	1200	-
3.3Table 1 (iv)("Lead IS 1699 : 1995 ")	-	1000	-
3.3Table 1 (v)("Arsenic IS 1699 : 1995 ")	-	1000	-
3.3Table 1 (vi)("Oxalates IS 13186 : 2024")	-	1500	-
3.3Table 1 (vii)("Readily Carbonizable substance IS 13186 : 2024")	-	1500	-
3.3Table 1 (viii)("Sulphate ( as Na₂SO₄) IS 1699 : 1995 ")	-	1000	-
3.4.2 Table2(i)("Water insoluble matter (Specific Requirements) IS 13186 : 2024 ")	-	1000	-
3.4.2 Table2(ii)("Chloride (as Cl) (Specific Requirements) IS 3025 : Part 32 : 1988")	-	1000	-
3.4.2 Table2(iii)("Phosphate (as P₂O₅) (Specific Requirements) IS 13186 : 2024 ")	-	1000	-
3.4.2 Table2(iv)("Calcium (Specific Requirements) IS 3025 : Part 40 : 1991 ")	-	1000	-
3.4.2 Table2(v)("Tridodecylamine (Specific Requirements) IS 13186 : 2024")	-	1500	-

31 Dec, 2026

-
Included w.e.f. 12.09.2024

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

IDMA LABORATORIES LIMITED, PANCHKULA

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List