BIS - LIMS (Laboratory Information Management System)

Hi Physix Laboratory India Private Limited

B-32/1/2, MIDC, Industrial Area, Ranjangaon, Pune, Pune, Pune, Maharashtra, 412220

8552003805 infohplindia@gmail.com

Scope List

Reset

99 Results

S.No.

Indian Standard No.

Product

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1391 : Part 2 (2018)

Room air conditioners - Specification: Part 2 split air conditioners (Third Revision)

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 8.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	80000	-
Heating Capacity test (Clause No. 8.2.1, 9.11), Power consumption test by heat pump (Clause No. 9.8)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	115000	-
Clause No. 15.3.3(a)(Protection against access to the live part was conducted using Test Probe B.)	-	25000	-
Clause No. 15.2.5 & 15.3.3(c)(Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	0	Testing charges are included in Cl. 15.3.3(a)
Clause No. 15.2.3 & 15.3.3(b)(High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	0	Testing charges are included in Cl. 15.3.3(a)
Clause No. 15.2.4 & 15.3.3(d)( 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.)	-	0	Testing charges are included in Cl. 15.3.3(a)
Clause No. 14.3( Sound Test was conducted using Sound Level Meter. )	-	40000	-
Clause No. 8.1.3, 9.5( Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	60000	-
Clause No. 8.1.4, 9.6( Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	30000	-
Clause No. 8.1.2, 9.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	80000	-
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	135000	Testing charges are for Cl.9.7, 9.8 & 9.9.
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	0	Testing charges are included in Cl.9.7, 9.8 & 9.9.
Clause No. 15.4.2( Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Testing Charges are for 15.2

Complete

20 Jun, 2025

IS 1391 : Part 1 (2017)

Room air conditioners - Specification: Part 1 unitary air conditioners (Third Revision)

505000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 5.1(Physical Verification)	-	0	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	110000	-
Clause No. 9.1.2, 10.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 9.1.3, 10.5(Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	60000	-
Clause No. 9.1.4, 10.6(Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	30000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	0	Testing charges are included 10.10
Heating Capacity test (Clause No. 9.2.1), Power consumption test by heat pump ( Clause No. 10.9)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 9.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 16.4.2(Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Testing charges are for Cl. 16.2
Clause No. 16.3.3(a)(The Protection against access to the live part was conducted using Test Probe B.)	-	20000	Testing charges are for Cl. 16.3.3
Clause No. 16.2.3 & 16.3.3(b)(The High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	0	Testing charges are included in Cl.16.3.3(a)
Clause No. 16.2.5 & 16.3.3(c)(The Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	0	Testing charges are included in Cl.16.3.3(a)
Clause No. 16.2.4 & 16.3.3(d)(The 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester. )	-	0	Testing charges are included in Cl.16.3.3(a)
Clause No. 15.3(Sound Test was conducted using Sound Level Meter. )	-	35000	-

Complete

20 Jun, 2025

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

1200000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General testing requirements)	-	340000.00	340000.00 for upto 20kW, 480000.00 for Above 20kW - upto 50kW, 700000.00 for Above 50kW - upto 100kW, 970000.00 for Above 100kW - upto 200kW.
5(Marking and documentation)	-	20000.00	20000.00 for upto 20kW, 20000.00 for Above 20kW - upto 50kW, 20000.00 for Above 50kW - upto 100kW, 20000.00 for Above 100kW - upto 200kW.
6(Environmental Requirements and conditions)	-	60000.00	60000.00 for upto 20kW, 70000.00 for Above 20kW - upto 50kW, 80000.00 for Above 50kW - upto 100kW, 100000.00 for Above 100kW - upto 200kW.
7(Protection against electric shock and energy hazards)	-	160000.00	160000.00 for upto 20kW, 200000.00 for Above 20kW - upto 50kW, 270000.00 for Above 50kW - upto 100kW, 350000.00 for Above 100kW - upto 200kW.
8(Protection Against mechanical Hazards)	-	100000.00	100000.00 for upto 20kW, 130000.00 for Above 20kW - upto 50kW, 170000.00 for Above 50kW - upto 100kW, 210000.00 for Above 100kW - upto 200kW.
9(Protection Against Fire Hazards)	-	100000.00	100000.00 for upto 20kW, 120000.00 for Above 20kW - upto 50kW, 150000.00 for Above 50kW - upto 100kW, 180000.00 for Above 100kW - upto 200kW.
10(Protection against Sonic Pressure hazards)	-	50000.00	50000.00 for upto 20kW, 50000.00 for Above 20kW - upto 50kW, 50000.00 for Above 50kW - upto 100kW, 50000.00 for Above 100kW - upto 200kW.
11(Protection against liquid hazards)	-	40000.00	40000.00 for upto 20kW, 40000.00 for Above 20kW - upto 50kW, 40000.00 for Above 50kW - upto 100kW, 40000.00 for Above 100kW - upto 200kW.
12(Chemical hazards)	-	40000.00	40000.00 for upto 20kW, 40000.00 for Above 20kW - upto 50kW, 40000.00 for Above 50kW - upto 100kW, 40000.00 for Above 100kW - upto 200kW.
13(Physical requirements)	-	230000.00	230000.00 for upto 20kW, 270000.00 for Above 20kW - upto 50kW, 330000.00 for Above 50kW - upto 100kW, 390000.00 for Above 100kW - upto 200kW.
14(Components)	-	60000.00	60000.00 for upto 20kW, 80000.00 for Above 20kW - upto 50kW, 100000.00 for Above 50kW - upto 100kW, 150000.00 for Above 100kW - upto 200kW.
15(Software and firmware performing safety functions)	-	0.0	-

Complete

20 Jun, 2025

IS 16102 : Part 2 (2017)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

258000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	3000	-
8(Lamp Input)	-	58000	-
9(light output)	-	57000	-
10(Colour Nomenclature, Variation and Rendering)	-	18000	-
11(Lamp Life)	-	120000	-

Complete

20 Jun, 2025

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

31350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	20000		Additional charges Rs.5000 will be added for Marking (Cl. no.6) .
5.2(Message Readability)	-	15000		Additional charges Rs.5000 will be added for Marking (Cl. no.6) .

Complete

20 Jun, 2025

IS 1476 : Part 1 (2000)

Performance of household refrigerating appliance - Refrigerators with or without low temperature compartment: Part 1 energy consumption and performance (Third Revision)

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Determination of Linear dimensions, volumes & areas.)	-	30000	-
11( Additional Requirement for ECO mark)	-	0	-
14.1(Door Seal Test)	-	5000	-
14.2(Mechanical strength of shelves & similar components)	-	5000	-
14.3(Doors and fitting test)	-	10000	-
14.4(No load adjustment test)	-	30000	-
14.5(No-load performance Test)	-	50000	-
14.6(Ice making test)	-	10000	-
14.7(Thermal Insulation Test)	-	15000	-
14.9(Rated Energy consumption test)	-	50000	-
14.8(High voltage test)	-	5000	-
15.2(Insulation resistance)	-	5000	-
15.1(Thermostat Test)	-	5000	-

Complete

20 Jun, 2025

IS 15644 (2006)

Safety of electric toys

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	2500	-
8.0(Power Input)	-	5000	-
9.0(Heating and abnormal operation)	-	5000	-
10.0(Electrical strength at operating temperature)	-	5000	-
11.1(Moisture resistance)	-	10000	Testing charges are for Cl. no. 11
11.2(Resistant to humidity)	-	0	Testing charges are included in Cl. no. 11.1
12.0(Electric strength at room temperature)	-	2500	-
13.0(Mechanical strength)	-	5000	-
14.1(Construction)	-	5000	Testing charges are for Cl. no. 14
14.2(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.3(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.4(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.5(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.6(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.7(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.8(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.9(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.1(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.11(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.12(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.13(Construction)	-	0	Testing charges are included in Cl. no. 14.1
14.14(Construction)	-	0	Testing charges are included in Cl. no. 14.1
15.1(Protection of cords and wires)	-	5000	Testing Charges are for Cl. no.15.
15.2(Protection of cords and wires)	-	0	Testing charges are included in Cl. no. 15.1
17 Table-1(Screws and connections)	-	5000	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	0	Testing charges are included in Cl. no. 17
18.0(Clearance and creepage distance)	-	5000	-
19.1(Ball pressure test IEC 60695-10-2)	-	10000	Testing charges are for Cl. no. 19
19.2.1(Glow wire test IEC 60695-2-11)	-	0	Testing charges are included in Cl. no. 19.1

Complete

20 Jun, 2025

IS 15750 (2006)

Household frost - Free refrigerating appliances - Refrigerators cooled by internal forced air circulation - Characteristics and test methods - Specification

530000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Testing the air tightness of Door or Lid Seal)	-	5000	-
9(Testing the opening force of door(s) or lid(s))	-	20000	-
10(Testing the durability of hinges and handles of door(s) and lid(s))	-	50000	-
11(Testing the mechanical strength of shelves and similar components)	-	20000	-
12(Testing the storage temperatures)	-	30000	-
13(Water vapour condensation test )	-	60000	-
14(Energy consumption test)	-	100000	-
15(Temperature Rise Test)	-	60000	-
16(Pull down test)	-	60000	-
17(Ice making test)	-	30000	-
18(Test for absence of odour & taste)	-	50000	-
19(High voltage test)	-	5000	-
20(Insulation resistance test)	-	5000	-
22(Requirement of ECO mark)	-	0	-
23(Designation)	-	0	-
24(Marking)	-	5000	-
6(Determination of linear dimensions, volumes and areas)	-	30000	-

Complete

20 Jun, 2025

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

16350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	2000	2000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW
Cl.10 of IS:302-1:2008(Power Input and Current)	-	2000	2000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW
Cl.11 & IS:302-1:2008(Heating)	-	2000	2000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW
Cl.11.8(Heating)	-	0	2000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 11
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	2000	2000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	2000	2000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	4000	4000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	4000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 15
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	3000	3000 for Convector, Fan, Heaters for use in Green House, Panel Heaters, Tabular heaters, Liquid filled radiators & radiant heaters for up to 3kW
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW.
Cl.19.101(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.103(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.102(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.104(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.105(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.106(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.107(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.108(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.109(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.110(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.111(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.112(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.113(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.19.114(Abnormal Operation.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 1kW and 3000 for Liquid filled radiators & radiant heaters for above 1kW to 3kW. Charges already included in clause number 19
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	2000	2000 for Liquid filled radiators & radiant heaters for up to 3kW
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	2000	2000 for Liquid filled radiators & radiant heaters for up to 3kW
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 21
Cl.21.101 (Mechanical Strength.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 21
Cl.21.102(Mechanical Strength.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 21
Cl.21.103(Mechanical Strength.)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 21
Cl.22.1 of IS 302-1:2008(Construction)	-	2000	2000 for Liquid filled radiators & radiant heaters for up to 3kW
Cl.22.5 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.7 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.8 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.9 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.11(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.12 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.13 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.14 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.15 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.18 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.20 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.22.21 of IS 302-1:2008(Construction)	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 22.1
Cl.23 & IS:302-1:2008(Internal Wiring )	-	2000	2000 for Liquid filled radiators & radiant heaters for up to 3kW
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 23
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 23
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	2000 for Liquid filled radiators & radiant heaters for up to 3kW Charges already included in clause number 23
Cl.24.1 of 302-1:2008(Component)	-	3000	3000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators for up to 3kW. 2000 radiant heaters for up to 3kW.
Cl.24.1.3 (Component)	-	0	3000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators for up to 3kW. 2000 radiant heaters for up to 3kW. Testing charges already included included in clause number 24.
C.24.1.4(Component)	-	0	3000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators for up to 3kW. 2000 radiant heaters for up to 3kW. Testing charges already included included in clause number 24.
C.24.2 of 302-1:2008(Component)	-	0	3000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators for up to 3kW. 2000 radiant heaters for up to 3kW. Testing charges already included included in clause number 24.
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	2000	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 25.1
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	1000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 26.1
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	1000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 26.1
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	2000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 27.1
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	1000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1000	2000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	3000	3000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	3000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 30
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	1000	1000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	3000 for Convector, Fan, heaters use in green house, Panel & Tubular Heaters & Liquid filled radiators & radiant heaters for up to 3kW Testing charges already included included in clause number 30

Complete

20 Jun, 2025

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

14334 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions (Cl.App.F-4))	-	2000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	Testing charges are for Cl. no. 9
9(General construction (as per Cl. 9 & F-3))	-	0	Testing charges are for Cl. no. 9
9.1(General construction (as per Cl. 9 & F-3))	-	0	Testing charges are for Cl. no. 9
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	Testing charges are for Cl. no. 9
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	Testing charges are for Cl. no. 9
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	Testing charges are for Cl. no. 9
9.5(Earthing)	-	0	Testing charges are for Cl. no. 9
9.5(Earthing)	-	0	Testing charges are for Cl. no. 9
9.5(Earthing)	-	0	Testing charges are for Cl. no. 9
10(Type of enclosures)	-	5000	-
11(Methods of cooling)	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	5000	Testing charges are for Cl. no. 12.1.1
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	Testing charges are for Cl. no. 12.1.1
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	Testing charges are for Cl. no. 12.1.1
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	2000	Testing charges are for Cl. no. 12.1.2
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	3000	Testing charges are for Cl. no. 12.2
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	Testing charges are for Cl. no. 12.2
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	Testing charges are for Cl. no. 12.2
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	5000	Testing charges are for Cl. no. 12.5
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	Testing charges are for Cl. no. 12.5
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	Testing charges are for Cl. no. 12.5
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	Testing charges are for Cl. no. 12.5
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	Testing charges are for Cl. no. 12.5
12.6(Vibration Severity)	-	2000	-
12.7(Insulation resistance test)	-	2000	-
13.1(High voltage test)	-	1000	-
13.2(Moisture proofness)	-	4000	Testing charges are for Cl. no. 13.2
13.2(Moisture proofness)	-	0	Testing charges are for Cl. no. 13.2
13.3(Leakage current test)	-	1000	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	0	-
15.1.5(Noise Level)	-	0	-
15.2(Specific Requirements)	-	0	-
16.1(Marking and Diagram of connenctions)	-	1000	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
16.1(Marking and Diagram of connenctions)	-	0	Testing charges are for Cl. no. 16
17.3 (a)(No load test at rated voltage and frequency )	-	5000	Testing charges are for Cl. no. 17.3
17.3 (a)(No load test at rated voltage and frequency)	-	0	Testing charges are for Cl. no. 17.3
17.3 (a)(No load test at rated voltage and frequency)	-	0	Testing charges are for Cl. no. 17.3

Complete

20 Jun, 2025

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

740000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	-
10.1(Visual inspection)	-	5000	-
10.2(Maximum power determination)	-	10000	-
10.3(Insulation test)	-	5000	-
10.4(Measurement of temperature coefficients)	-	20000	-
10.5(Measurement of NOCT)	-	20000	-
10.6(Performance at STC and NOCT)	-	20000	-
10.7(Performance at low irradiance)	-	10000	-
10.8(Outdoor exposure test)	-	30000	-
10.9(Hot-spot endurance test)	-	50000	-
10.10(UV preconditioning)	-	100000	-
10.11(Thermal cycling test)	-	150000	-
10.12(Humidity freeze test)	-	100000	-
10.13(Damp heat test)	-	150000	-
10.14(Robustness of termination test)	-	5000	-
10.15(Wet leakage current test)	-	5000	-
10.16(Mechanical load test)	-	20000	-
10.17(Hail test)	-	10000	-
10.18(Bypass diode thermal' test)	-	30000	-

Complete

20 Jun, 2025

IS/IEC 60335 : Part 2 : Sec 89 (2010)

Household and similar electrical appliances - Safety: Part 2 - 89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 , 7.12, 7.14,7.15(Marking)	-	5000	-
8, 8.1(Protection against access to live parts)	-	5000	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	Testing charges already included in 8
8.2(Protection against access to live parts)	-	0	Testing charges already included in 8
10.1(Power input and current)	-	15000	-
10.101 (Power input and current)	-	0	Testing charges already included in 10.1
11(TEMPERATURE RISE)	-	20000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	10000	-
14(Transient Over Voltage & table 6)	-	10000	-
15(Moisture resistance)	-	15000	-
16 & 16.1(Leakage current and electric strength)	-	10000	-
17(Overload protection of transformers and associated circuits)	-	10000	-
19(ABNORMAL OPERATION)	-	30000	-
20.1(Stability and mechanical hazards)	-	10000	-
20.2(Stability and mechanical hazards)	-	0	Testing charges already included in 20.1
21.1(MECHANICAL STRENGTH)	-	10000	-
21.2(MECHANICAL STRENGTH)	-	0	Testing charges already included in 21.1
22.101(MECHANICAL STRENGTH)	-	0	Testing charges already included in 21.1
22.102(MECHANICAL STRENGTH)	-	0	Testing charges already included in 21.1
22.1(Constructions)	-	40000	-
22.2(Constructions)	-	0	Testing charges already included in 22.1
22.3(Constructions)	-	0	Testing charges already included in 22.1
22.4(Constructions)	-	0	Testing charges already included in 22.1
22.5(Constructions)	-	0	Testing charges already included in 22.1
22.6(Constructions)	-	0	Testing charges already included in 22.1
22.7 to 22.10(Constructions)	-	0	Testing charges already included in 22.1
22.11(Constructions)	-	0	Testing charges already included in 22.1
22.12(Constructions)	-	0	Testing charges already included in 22.1
22.13 to 22.52(Constructions)	-	0	Testing charges already included in 22.1
22.101 to 22.102(Constructions)	-	0	Testing charges already included in 22.1
22.103(Constructions)	-	0	Testing charges already included in 22.1
22.104(Constructions)	-	0	Testing charges already included in 22.1
22.105 to 22.114(Constructions)	-	0	Testing charges already included in 22.1
23.1 & 23.2(Internal wiring)	-	5000	-
23.3(Internal wiring)	-	0	Testing charges already included in 23.1 & 23.2
23.4(Internal wiring)	-	0	Testing charges already included in 23.1 & 23.2
23.5 to 23.8(Internal wiring)	-	0	Testing charges already included in 23.1 & 23.2
23.9 ,23.10(Internal wiring)	-	0	Testing charges already included in 23.1 & 23.2
24(Components)	-	5000	-
25.1(Supply connection and external flexible cords)	-	5000	-
25.2 to 25.25(Supply connection and external flexible cords)	-	0	Testing charges already included in 25.1
26, 26.1 to 26.11(Terminals for external conductors)	-	5000	-
27, 27.1 to 27.6(Provision for earthing)	-	5000	-
28.1, Table No.-14(Screws and connections)	-	5000	-
28.2 to 28.4(Screws and connections)	-	0	Testing charges already included in 28.1
29 and table (creepage and Clearances distances )	-	10000	-
30.1(Resistance to heat and fire)	-	15000	-
30.2(Resistance to heat and fire)	-	0	Testing charges already included in 30.1
31(Resistance to rusting)	-	5000	-

Complete

20 Jun, 2025

IS 16103 : Part 2 (2012)

Led modules for general lighting: Part 2 performance requirements

296000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	3000	-
7(Module Power)	-	6000	-
8(Light Output)	-	77000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	18000	-
10(LED Module Life)	-	150000	-
13(Test for Emission (Radiated and Conducted) of radio frequency distribution)	-	40000	-

Complete

20 Jun, 2025

IS 16107 : Part 1 (2012)

Luminaires performance: Part 1 general requirements

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2(Photometric and Electrical Data)	-	75000		-

Complete

20 Jun, 2025

IS 16107 : Part 2 : Sec 1 (2012)

Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire

102000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Total Input Power)	-	6000	-
8(Light Output)	-	77000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	18000	-
10(LED Luminaire Life)	-	160000	-

Complete

20 Jun, 2025

IS 16077 (2013)

Thin - Film terrestrial photovoltaic (PV) modules - Design qualification and type approval

1130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	-
10.1(Visual inspection)	-	5000	-
10.2(Maximum power determination)	-	10000	-
10.3(Insulation test)	-	5000	-
10.4(Measurement of temperature coefficients)	-	20000	-
10.5(Measurement of NOCT)	-	20000	-
10.6(Performance at STC and NOCT)	-	20000	-
10.7(Performance at low irradiance)	-	10000	-
10.8(Outdoor exposure test)	-	30000	-
10.9(Hot-spot endurance test)	-	200000	-
10.10(UV preconditioning)	-	100000	-
10.11(Thermal cycling test)	-	150000	-
10.12(Humidity freeze test)	-	100000	-
10.13(Damp heat test)	-	150000	-
10.14(Robustness of termination test)	-	5000	-
10.15(Wet leakage current test)	-	5000	-
10.16(Mechanical load test)	-	20000	-
10.17(Hail test)	-	10000	-
10.18(Bypass diode thermal' test)	-	70000	-
10.19(Light Soaking)	-	200000	-

Complete

20 Jun, 2025

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

1400000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	470000.00	470000.00 for upto 20kW, 690000.00 for Above 20kW - upto 50kW, 940000.00 for Above 50kW - upto 100kW, 1290000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
5(Marking and documentation)	-	30000.00	30000.00 for upto 20kW, 30000.00 for Above 20kW - upto 50kW, 30000.00 for Above 50kW - upto 100kW, 30000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
6(Environmental requirements and conditions)	-	60000.00	60000.00 for upto 20kW, 70000.00 for Above 20kW - upto 50kW, 80000.00 for Above 50kW - upto 100kW, 100000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
7(Protection against electric shock and energy hazards)	-	190000.00	190000.00 for upto 20kW, 240000.00 for Above 20kW - upto 50kW, 320000.00 for Above 50kW - upto 100kW, 410000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
8(Protection against Mechanical Hazards)	-	100000.00	100000.00 for upto 20kW, 130000.00 for Above 20kW - upto 50kW, 170000.00 for Above 50kW - upto 100kW, 210000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
9(Protection against Fire Hazards)	-	120000.00	120000.00 for upto 20kW, 150000.00 for Above 20kW - upto 50kW, 190000.00 for Above 50kW - upto 100kW, 230000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
10(Protection against Sonic Pressure Hazards)	-	50000.00	50000.00 for upto 20kW, 50000.00 for Above 20kW - upto 50kW, 50000.00 for Above 50kW - upto 100kW, 50000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
11(Protection against Liquid Hazards)	-	40000.00	40000.00 for upto 20kW, 40000.00 for Above 20kW - upto 50kW, 40000.00 for Above 50kW - upto 100kW, 40000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
12(Protection against Chemical Hazards)	-	40000.00	40000.00 for upto 20kW, 40000.00 for Above 20kW - upto 50kW, 40000.00 for Above 50kW - upto 100kW, 40000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
13(Physical Requirements)	-	240000.00	240000.00 for upto 20kW, 280000.00 for Above 20kW - upto 50kW, 340000.00 for Above 50kW - upto 100kW, 400000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
14(Components)	-	60000.00	60000.00 for upto 20kW, 80000.00 for Above 20kW - upto 50kW, 100000.00 for Above 50kW - upto 100kW, 150000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.

Complete

20 Jun, 2025

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 IS/IEC 61730-1( Classification, Application and Inteded Use)	-	5000	-
5, 5.1 IS/IEC 61730-1( Requirements for design and Construction)	-	195000	Complete testing charges for Clause number 5 including all sub clauses.
5.2 IS/IEC 61730-1( Marking and Documentation)	-	0	Testing charges already covered in clause number 5.
5.3, 5.3.1 IS/IEC 61730-1( Electrical Components and Insualtion)	-	0	Testing charges already covered in clause number 5.
5.3.2 IS/IEC 61730-1( Internal Wiring)	-	0	Testing charges already covered in clause number 5.
5.3.3 IS/IEC 61730-1( External Wirings and cables)	-	0	Testing charges already covered in clause number 5.
5.3.4 IS/IEC 61730-1( Connectors)	-	0	Testing charges already covered in clause number 5.
5.3.5 IS/IEC 61730-1( Junction Box for PV modules)	-	0	Testing charges already covered in clause number 5.
5.3.6 IS/IEC 61730-1( Front sheet and back Sheet)	-	0	Testing charges already covered in clause number 5.
5.3.7 IS/IEC 61730-1( Insulation Barrier)	-	0	Testing charges already covered in clause number 5.
5.3.8 IS/IEC 61730-1( Electrical Connections)	-	0	Testing charges already covered in clause number 5.
5.3.9 IS/IEC 61730-1( Encapsulants)	-	0	Testing charges already covered in clause number 5.
5.3.10 IS/IEC 61730-1( Bypass Diodes)	-	0	Testing charges already covered in clause number 5.
5.4, 5.4.1 IS/IEC 61730-1( Mechanical and Electromechanical connections)	-	0	Testing charges already covered in clause number 5.
5.4.2 IS/IEC 61730-1( Screw Connctions)	-	0	Testing charges already covered in clause number 5.
5.4.3 IS/IEC 61730-1( Rivets)	-	0	Testing charges already covered in clause number 5.
5.4.4 IS/IEC 61730-1( Thread Cutting Screws)	-	0	Testing charges already covered in clause number 5.
5.4.5 IS/IEC 61730-1( Form/Press/Tight/Fit)	-	0	Testing charges already covered in clause number 5.
5.4.6 IS/IEC 61730-1( Connections by adhesives)	-	0	Testing charges already covered in clause number 5.
5.4.7 IS/IEC 61730-1( Other Connections)	-	0	Testing charges already covered in clause number 5.
5.5, 5.5.1 IS/IEC 61730-1( Materials)	-	0	Testing charges already covered in clause number 5.
5.5.2 IS/IEC 61730-1( Polymeric Materials)	-	0	Testing charges already covered in clause number 5.
5.5.2.3.2 IS/IEC 61730-1( Endurance to Electrical Stress)	-	0	Testing charges already covered in clause number 5.
5.5.2.3.3 IS/IEC 61730-1( Endurance to thermal stress-RTE (RTI) or TI )	-	0	Testing charges already covered in clause number 5.
5.5.2.3.4 IS/IEC 61730-1( Polymeric Insulating materials used as external Parts)	-	0	Testing charges already covered in clause number 5.
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	0	Testing charges already covered in clause number 5.
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions )	-	0	Testing charges already covered in clause number 5.
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	0	Testing charges already covered in clause number 5.
5.5.3.2 IS/IEC 61730-1( Current Carrying Parts)	-	0	Testing charges already covered in clause number 5.
5.5.4 IS/IEC 61730-1(Adhesives)	-	0	Testing charges already covered in clause number 5.
5.6, 5.6.1 IS/IEC 61730-1( Protection Agianst Electric Shock)	-	0	Testing charges already covered in clause number 5.
5.6.2 IS/IEC 61730-1( Protection Agianst accessibility to hazardeous live parts)	-	0	Testing charges already covered in clause number 5.
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	0	Testing charges already covered in clause number 5.
5.6.4 IS/IEC 61730-1( Distance through Insulation)	-	0	Testing charges already covered in clause number 5.

Complete

20 Jun, 2025

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

16612 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-35(Classification)	-	0	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	1000	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	2000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	3000	-
Cl. 11 IS 302-2-35(Heating)	-	5000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	4000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	5000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	4000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	5000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	2000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	2000	-
Cl. 22 IS 302-2-35(Construction )	-	3000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	1000	-
Cl. 24 IS 302-2-35(Components)	-	2000	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	1000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	3000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	1000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	4000	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	1000	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	1000	-

Complete

20 Jun, 2025

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	0	-
8.0(Protection against access to live parts)	-	2000	-
7.0(Classification)	-	1000	-
10.0(Input and Current)	-	3000	-
11.0(Heating)	-	3000	-
13.0(Leakage Current and electric strength at operating temperature)	-	3000	-
14.0(Transient Overvoltage)	-	2000	-
15.0(Moisture resistance)	-	5000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	2000	-
17.0(Overload Protection of transformer and associated circuit)	-	2000	-
19.0(Abnormal Operation)	-	5000	Excluding the testing charges of EMI/EMC (Cl. 19.11.4.1 to 19.11.4.7 of IS 302-1:2008
20.0(Stability and mechanical hazards)	-	2000	-
21.0(Mechanical Strength)	-	3000	-
22.0(Construction)	-	5000	-
23.0(Internal Wiring)	-	2000	-
24.0(Components)	-	5000	Additional testing charges will be applicable for other components testing, if required. Excluding the testing charges of components
25.0(Supply Connection and External Flexible Cords)	-	3000	-
26.0(Terminals for external conductors)	-	1000	-
27.0(Provision For Earthing)	-	2000	-
28.0(Screws and Connections)	-	1000	-
29.0(Creepage Distances and Clearances)	-	2000	-
30.0(Resistance To Heat and Fire)	-	3000	-
31.0(Resistance To Rusting)	-	3000	-
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-

Complete

20 Jun, 2025

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	4000	4000 for Upto 3kW & 5000 for Upto 5kW
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.18 of IS 2082:2018( Reheating Time)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.22 of IS 2082:2018(Finish)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
7(Marking)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
6(Classification )	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	2000	2000 for Upto 3kW & 3000 for Upto 5kW
(Cl.11 of 302-2-21:2011)(Heating)	-	3000	3000 for Upto 3kW & 4000 for Upto 5kW
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	3000	3000 for Upto 3kW & 3000 for Upto 5kW
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	3000	3000 for Upto 3kW & 3000 for Upto 5kW
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	4000	4000 for Upto 3kW & 4000 for Upto 5kW
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	3000	3000 for Upto 3kW & 4000 for Upto 5kW
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.24ofIS302-221:2011)(Component)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	3000	3000 for Upto 3kW & 3000 for Upto 5kW
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	999.99	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW

Complete

20 Jun, 2025

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

36750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.10(Lamp minimum overall length)	-	3000	-
Clause No. 4.9(Lamp cap temperature rise)	-	5000	-
Clause No. 4.8(Creepage distance for caps)	-	3000	-
Clause No. 4.7(Resistance to heat & fire)	-	20000	-
Clause No. 4.6(Parts which can become accidentally live)	-	2000	-
Clause No. 4.5(Electric strength )	-	3000	-
Clause No. 4.4(Insulation Resistance Measurement)	-	2000	-
Clause No. 4.3(Mechanical requirement for caps)	-	65000	-
Clause No. 4.2 (Marking.)	-	2000	-

Complete

20 Jun, 2025

IS 10617 (2018)

Hermetic compressors - Specification (Second Revision)

975000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1 & 5.1 -Table 2, 3, 4,5(Compressor Performance Test & Compressor Capacity Rating Test)	-	400000		-

Complete

20 Jun, 2025

Testing of samples less than 500 Watts only.

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 369:2019(Dimensions)	-	5000	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	5000	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	5000	-
Cl.10 of IS 369:2019(Warming-up time of the heater)	-	5000	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	10000	-
Cl.12 of IS 369:2019(Set-back)	-	10000	-
Cl.14 of IS 369:2019(Inrush current)	-	5000	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	5000	-
Cl.16 of IS 369:2019(Usable power)	-	5000	-

Complete

20 Jun, 2025

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

31275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Rating)	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	Testing charges already included in clause number 8.
8.1,a(Marking )	-	0	Testing charges already included in clause number 8.
8.1,b(Marking )	-	0	Testing charges already included in clause number 8.
8.1,c(Marking )	-	0	Testing charges already included in clause number 8.
8.1,d(Marking )	-	0	Testing charges already included in clause number 8.
8.1,e(Marking )	-	0	Testing charges already included in clause number 8.
8.1,f(Marking )	-	0	Testing charges already included in clause number 8.
8.1,g(Marking )	-	0	Testing charges already included in clause number 8.
8.2(Marking )	-	0	Testing charges already included in clause number 8.
8.3,a(Marking )	-	0	Testing charges already included in clause number 8.
8.3,b(Marking )	-	0	Testing charges already included in clause number 8.
8.3,c(Marking )	-	0	Testing charges already included in clause number 8.
8.3,d(Marking )	-	0	Testing charges already included in clause number 8.
8.3,e(Marking )	-	0	Testing charges already included in clause number 8.
8.4(Marking )	-	0	Testing charges already included in clause number 8.
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	Testing charges already included in clause number 8.
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	Testing charges already included in clause number 8.
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	Testing charges already included in clause number 8.
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	3000	-
10.2(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.3(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.4(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.5(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.6(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.7(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.8(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
11.1(Starting)	-	1000	-
11.2(Starting)	-	0	Testing charges already included in clause number 11.1
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	3000	-
16(Endurance Test)	-	10000	-
17(Test for Harmonic Distortion)	-	8000	-

Complete

20 Jun, 2025

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(PERFORMANCE REQUIREMENTS)	-	40000	Charges for Cl. 6.1& 9.3- Rs.10000, For Cl. 6.2(c),8.2.8 &8.4.3-Rs.10000, For Cl. 6.2(a),(b)& 10.4- Rs.20000
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	10000	Charges are for Cl. 6.2(c),8.2.8,8.4.3
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	10000	Charges are for 6.2 (a),(b) & 10.4
8.2.2(Protection against Electric Shock )	-	5000	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.4(Insulation Resistance Test)	-	5000	-
8.2.5( Leakage Current)	-	5000	-
8.2.6( Earthing Connections Tests)	-	5000	-
9.5( Energy Consumption)	-	10000	-
15( MARKING AND INFORMATION)	-	5000	-

Complete

20 Jun, 2025

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Design and General Construction)	-	5000	-
6.2(Design and General Construction)	-	0	Testing charges already included in 6.1
6.3(Design and General Construction)	-	0	Testing charges already included in 6.1
6.5(Design and General Construction)	-	0	Testing charges already included in 6.1
6.6(Design and General Construction)	-	0	Testing charges already included in 6.1
7.4.1(a)(Mechanical strength )	-	2000	-
7.4.1(b)(Mechanical strength )	-	0	Testing charges already included in 7.4
7.6(General and safety requirements)	-	2000	-
7.7(Voltage drop)	-	2000	-
8.1(Performance)	-	5000	-
8.2(Performance)	-	0	Testing charges already included in 8.1
8.3(Performance)	-	0	Testing charges already included in 8.1
9.1 (a)(Marking )	-	2000	-
9.1 (b)(Marking )	-	0	Testing charges already included in 9.1
9.1 (c)(Marking )	-	0	Testing charges already included in 9.1
9.1 (d)(Marking )	-	0	Testing charges already included in 9.1
9.1 (e)(Marking )	-	0	Testing charges already included in 9.1
9.1 (f)(Marking )	-	0	Testing charges already included in 9.1
9.5.1 , 7.3 (a)(Temperature Rise )	-	5000	-
9.5.1 , 7.3(Temperature Rise)	-	0	Testing charges already included in 9.5.1
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	Testing charges already included in 9.5.1
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	2000	-
9.5.3(High Voltage Test)	-	2000	-
9.5.7, 9.5.4(Moisture Resistance )	-	7000	-
9.5.5(Earthing Connection)	-	2000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	2000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	2000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	2000	-
9.5.10( Electrical Endurance Test)	-	5000	-
9.5.11.3(Environmental Tests)	-	10000	Testing charges for cold test and dry heat test.
9.5.11.4(Environmental Tests)	-	5000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	5000	-
9.5.13(Resistance to Rusting )	-	3000	-
9.5.14(Checking of Dimensions)	-	2000	-

Complete

20 Jun, 2025

IS 14286 : Part 1 : Sec 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules (Second Revision)

1315000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Visual inspection (MQT 01))	-	5000	-
11.2(Maximum power determination (MQT 02))	-	10000	-
11.3(Insulation test (MQT 03))	-	5000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	60000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	20000	-
11.6(Performance at STC and NMOT (MQT 06))	-	80000	-
11.7(Performance at low irradiance (MQT 07))	-	30000	-
11.8(Outdoor exposure test (MQT 08))	-	30000	-
11.9(Hot-spot endurance test (MQT 09))	-	200000	-
11.1(UV preconditioning test (MQT 10))	-	100000	-
11.11(Thermal cycling test (MQT 11))	-	250000	-
11.12(Humidity-freeze test (MQT 12))	-	100000	-
11.13(Damp heat test (MQT 13))	-	150000	-
11.14(Robustness of terminations (MQT 14))	-	10000	-
11.15(Wet leakage current test (MQT 15))	-	5000	-
11.16(Static mechanical load test (MQT 16))	-	20000	-
11.17(Hail test (MQT 17))	-	10000	-
11.18(Bypass diode thermal test (MQT 18))	-	80000	-
11.19(Stabilization (MQT 19))	-	150000	-

Complete

20 Jun, 2025

IS 14286 : Part 1 : Sec 2 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 2 special requirements for testing of thin - Film cadmium telluride (CdTe) based photovoltaic (Pv) modules (Second Revision)

1465000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 IS 14286( Marking and Documentation)	-	0	-
11.1 IS 14286( Visual inspection)	-	5000	-
11.2 IS 14286( Maximum power determination)	-	10000	-
11.3 IS 14286( Insulation Test)	-	5000	-
11.4 IS 14286( Measurement of temperature coefficients)	-	60000	-
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	20000	-
11.6 IS 14286( Performance at STC and NMOT)	-	80000	-
11.7 IS 14286( Performance at low irradiance)	-	30000	-
11.8 IS 14286( Outdoor exposure Test)	-	30000	-
11.9 IS 14286( Hot-spot endurance test)	-	200000	-
11.10 IS 14286( UV Preconditioning test )	-	100000	-
11.11 IS 14286( Thermal cycling test)	-	250000	-
11.12 IS 14286( Humidity-freeze test)	-	100000	-
11.13 IS 14286(Damp heat test)	-	150000	-
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	10000	-
11.15 IS 14286( Wet leakage current test)	-	5000	-
11.16 IS 14286( Static Mechanical load test)	-	20000	-
11.17, Table 3 & 4, IS 14286( Hail test)	-	10000	-
11.18 IS 14286( Bypass diode testing)	-	80000	-
11.19 IS 14286( Stabilization )	-	300000	-

Complete

20 Jun, 2025

IS 14286 : Part 1 : Sec 3 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 3 special requirements for testing of thin - Film amorphous silicon based photovoltaic (Pv) modules (Second Revision)

1465000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 IS 14286( Marking and Documentation)	-	0	-
11.1 IS 14286( Visual inspection)	-	5000	-
11.2 IS 14286( Maximum power determination)	-	10000	-
11.3 IS 14286( Insulation Test)	-	5000	-
11.4 IS 14286( Measurement of temperature coefficients)	-	60000	-
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	20000	-
11.6 IS 14286( Performance at STC and NMOT)	-	80000	-
11.7 IS 14286( Performance at low irradiance)	-	30000	-
11.8 IS 14286( Outdoor exposure Test)	-	30000	-
11.9 IS 14286( Hot-spot endurance test)	-	200000	-
11.10 IS 14286( UV Preconditioning test )	-	100000	-
11.11 IS 14286( Thermal cycling test)	-	250000	-
11.12 IS 14286( Humidity-freeze test)	-	100000	-
11.13 IS 14286(Damp heat test)	-	150000	-
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	10000	-
11.15 IS 14286( Wet leakage current test)	-	5000	-
11.16 IS 14286( Static Mechanical load test)	-	20000	-
11.17, Table 3 & 4, IS 14286( Hail test)	-	10000	-
11.18 IS 14286( Bypass diode testing)	-	80000	-
11.19(Stabilization (MQT 19))	-	300000	-

Complete

20 Jun, 2025

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Hi Physix Laboratory India Private Limited

B-32/1/2, MIDC, Industrial Area, Ranjangaon, Pune, Pune, Pune, Maharashtra, 412220

8552003805 infohplindia@gmail.com

Scope List