BIS - LIMS (Laboratory Information Management System)

Hindustaan Testing Solutions LLP

Plot No. 36,Sector 1, HSIIDC IGC Saha, Ambala Cantt, Ambala Cantt, Ambala, Haryana, 133104

9355002828 hindustaantesthouse@gmail.com

Scope List

Reset

42 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	Extra Charges for Timber test
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	Extra Charges for Adhesive testing as per BIS scope of testing
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	Extra Charges for veneer test
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	Extra Charges for veneer test
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	Extra Charges
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	200	-
Cl-7.2(Thickness)	-	200	-
Cl-7.3(Squareness)	-	200	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	600	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	800	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	400	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	3000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	800	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	400	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	3000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	3300	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	400	-
Cl-10.8(Tensile Strength)	-	1200	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	1000	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1000	-
Cl-10.12(Formaldehyde Content Test)	-	2000	Testing charges-21500 20% discount to BIS GSTIN as per govt. rule
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	0	-
Cl-7.2(Thickness)	-	0	-
Cl-7.3(Squareness)	-	0	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	0	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	0	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	0	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	0	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	0	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	0	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	0	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	0	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	0	-
Cl-10.8(Tensile Strength)	-	0	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	0	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	0	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	0	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	0	-
Cl-10.11(Retention of Preservative)	-	0	-
Cl-10.12(Formaldehyde Content Test)	-	0	-

12 Sep, 2028

-
Included w.e.f. 26.09.2024 Exclusion: Cl.10.5.2 (Water Resistance Test (Alternate method)), Cl.10.13 (Steady State Foraldehyde Emission Test)

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	0	Testing charges -18500 20% discount to BIS GSTIN as per govt rule
Cl-4.2(Adhesive)	-	0	Extra Charges as per BIS scope of testing
Cl-5.1(Veneers)	-	0	Extra Charges
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	0	Extra Charges
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	0	-
Cl-6.1(Dimensions (length))	-	199.99	-
Cl-6.2(Thickness)	-	200	-
Cl-6.3(Squareness)	-	200	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	0	-
Cl-9.3(Moisture Content)	-	600	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	400	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	3000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	800	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	400	-
Cl-9.6(Tensile Strength-Along the grain)	-	1200	-
Cl-9.7(Mycological Test -Adhesion)	-	3700	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	1000	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	1000	-
Cl-9.10(Retention of Preservative)	-	1000	-
Cl-9.11(Formaldehyde Content Test)	-	2000	-
Cl-4.1(Timber)	-	0	-
Cl-4.2(Adhesive)	-	0	-
Cl-5.1(Veneers)	-	0	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	0	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	0	-
Cl-6.1(Dimensions (length))	-	0	-
Cl-6.2(Thickness)	-	0	-
Cl-6.3(Squareness)	-	0	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	0	-
Cl-9.3(Moisture Content)	-	0	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	0	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	0	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	0	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	0	-
Cl-9.6(Tensile Strength-Along the grain)	-	0	-
Cl-9.7(Mycological Test -Adhesion)	-	0	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	0	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	0	-
Cl-9.10(Retention of Preservative)	-	0	-
Cl-9.11(Formaldehyde Content Test)	-	0	-
5.1.1(Defects in veneers)	-	0	-
Cl-9.4.2(Adhesion of Plies)	-	0	-

12 Sep, 2028

-
Included w.e.f. 25.09.2024 Exclusion: Cl-9.12 (Steady-State Formaldehyde Emission Test), Cl.9.5.2 (Alternate method for water resistance test)

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	Testing charges-8900 (MR)/10600 (BWR)/11100 (BWP) 20% discount to BIS GSTIN as per govt rule.
Cl-5.2, Table- 1 (i)(Blister)	-	400	Clause 5.2, Table 1-Testing charges-400
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	Separate testing charges as per BIS scope of Testing
Cl-7.2.1(Thickness of veneers)	-	0	Separate testing charges-400
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	200	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	6300	Testing charges-800 (MR)/2500 (BWR)/3000 (BWP)
Cl-11.3.2(Mycological Test)	-	2500	-
Cl-11.4(Moisture Content)	-	600	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-

12 Sep, 2028

-
Included w.e.f. 25.09.2024 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

IS 13714 (1993)

Dunnage pallets - Warehousing - Specification

All

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(DIMENSIONS)	-	400	Testing charges-5000 20% discount to BIS GSTIN applicable as per govt rule
4.1(DIMENSIONS)	-	0	-
4.1(DIMENSIONS)	-	0	-
5.1 Annex A(Timber)	-	0	-
5.1.1(Timber)	-	100	-
5.1.2(Timber)	-	1200	-
5.1.2(Timber)	-	100	-
5.1.2(Timber)	-	200	-
5.1.2.1 (Objectionable knots)	-	200	-
5.2.1(Nails)	-	100	-
5.2.1(Nails)	-	100	-
6.1 , Fig. 1(CONSTRUCTION)	-	400	-
6.1.1(CONSTRUCTION)	-	400	-
6.1.2(CONSTRUCTION)	-	400	-
6.1.2(CONSTRUCTION)	-	400	-
6.1.2(CONSTRUCTION)	-	400	-
7(WORKMANSHIP AND FINISH)	-	400	-
10.1 (a)(MARKING)	-	0	-
10.1 (b)(MARKING)	-	0	-
10.1 (c)(MARKING)	-	0	-
5.1.2.1 (Objectionable knots)	-	200	-

12 Sep, 2028

-
Included w.e.f. 09.05.2024 Exclusion: Identification of timber species & Cl.5.2 (Nails)

IS 15380 (2023)

MOULDED HIGH DENSITY FIBRE HDF PANELLED DOOR SHUTTERS - SPECIFICATION ( First Revision )

All

24400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Sized)	-	0	Testing charges-24400(BWP) & 21600(MR) 20% discount to BIS GSTIN applicable as per govt rule
Cl-6.1.2(Moisture content in timbers)	-	0	Additional Testing charges- 800
Cl-6.2 S.No (1), i(Density, kg/m3 , Min)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl-6.2 S.No (1), ii(Moisture content, percent, Max)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl-6.2 S.No (1), iii(Water absorption, percent, Max)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl-6.2 S.No (1), iv(Swelling in water, percent, Max)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl-6.2 S.No (1), v(Modulus of rupture, N/mm2 , Min)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl-6.2 S.No (1), vi(Internal bond strength, N/mm2 , Min)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl-6.2 S.No (1), vii(Immersion in boiling water at (100 ± 3) °C for 4 h)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl-6.2 S.No (1), viii(Formaldehyde emission, mg/100 g, Max)	-	0	Additional Testing charges for Clause 6.2, Table 2- 12200
Cl- 6.3(Particle Boards as Core)	-	0	Additional Testing charges for Clause 6.3- 1200
Cl- 6.4(Adhesive)	-	0	Additional Testing charges for Clause 6.4 as per BIS scope
Cl- 6.5(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	Additional Testing charges for Clause 6.5 as per BIS scope
Cl-11.1(Dimensions and Squareness Test)	-	400	-
Cl-11.2(General Flatness Test)	-	600	-
Cl-11.3(Local Planeness Test)	-	1250	-
Cl-11.4(Impact Indentation Test)	-	1250	-
Cl-11.5(Flexure Test)	-	1250	-
Cl-11.6(Edge Loading Test)	-	1250	-
Cl-11.7(Shock Resistance Test)	-	1250	-
Cl-11.8(Buckling Resistance Test)	-	1250	-
Cl-11.9(Slamming Test)	-	1250	-
Cl-11.10(Misuse Test)	-	1250	-
Cl-11.11(Varying Humidity Test)	-	7000	-
Cl-11.12(End Immersion Test)	-	3400	2800 (BWP) & 600(MR)
Cl-11.13(Glue Adhesion Test)	-	1200	-
Cl-11.14(Screw Withdrawal Resistance Test)	-	1500	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-5.1(Sized)	-	0	-
Cl-6.1.2(Moisture content in timbers)	-	0	-
Cl-6.2 S.No (1), i(Density, kg/m3 , Min)	-	0	-
Cl-6.2 S.No (1), ii(Moisture content, percent, Max)	-	0	-
Cl-6.2 S.No (1), iii(Water absorption, percent, Max)	-	0	-
Cl-6.2 S.No (1), iv(Swelling in water, percent, Max)	-	0	-
Cl-6.2 S.No (1), v(Modulus of rupture, N/mm2 , Min)	-	0	-
Cl-6.2 S.No (1), vi(Internal bond strength, N/mm2 , Min)	-	0	-
Cl-6.2 S.No (1), vii(Immersion in boiling water at (100 ± 3) °C for 4 h)	-	0	-
Cl-6.2 S.No (1), viii(Formaldehyde emission, mg/100 g, Max)	-	0	-
Cl- 6.3(Particle Boards as Core)	-	0	-
Cl- 6.4(Adhesive)	-	0	-
Cl- 6.5(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	-
Cl-11.1(Dimensions and Squareness Test)	-	0	-
Cl-11.2(General Flatness Test)	-	0	-
Cl-11.3(Local Planeness Test)	-	0	-
Cl-11.4(Impact Indentation Test)	-	0	-
Cl-11.5(Flexure Test)	-	0	-
Cl-11.6(Edge Loading Test)	-	0	-
Cl-11.7(Shock Resistance Test)	-	0	-
Cl-11.8(Buckling Resistance Test)	-	0	-
Cl-11.9(Slamming Test)	-	0	-
Cl-11.10(Misuse Test)	-	0	-
Cl-11.11(Varying Humidity Test)	-	0	-
Cl-11.12(End Immersion Test)	-	0	-
Cl-11.13(Glue Adhesion Test)	-	0	-
Cl-11.14(Screw Withdrawal Resistance Test)	-	0	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-5.1(Sized)	-	0	-
Cl-6.1.2(Moisture content in timbers)	-	0	-
Cl-6.2 S.No (1), i(Density, kg/m3 , Min)	-	0	-
Cl-6.2 S.No (1), ii(Moisture content, percent, Max)	-	0	-
Cl-6.2 S.No (1), iii(Water absorption, percent, Max)	-	0	-
Cl-6.2 S.No (1), iv(Swelling in water, percent, Max)	-	0	-
Cl-6.2 S.No (1), v(Modulus of rupture, N/mm2 , Min)	-	0.01	-
Cl-6.2 S.No (1), vi(Internal bond strength, N/mm2 , Min)	-	0	-
Cl-6.2 S.No (1), vii(Immersion in boiling water at (100 ± 3) °C for 4 h)	-	0	-
Cl-6.2 S.No (1), viii(Formaldehyde emission, mg/100 g, Max)	-	0	-
Cl- 6.3(Particle Boards as Core)	-	0	-
Cl- 6.4(Adhesive)	-	0	-
Cl- 6.5(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	-
Cl-11.1(Dimensions and Squareness Test)	-	0	-
Cl-11.2(General Flatness Test)	-	0	-
Cl-11.3(Local Planeness Test)	-	0	-
Cl-11.4(Impact Indentation Test)	-	0	-
Cl-11.5(Flexure Test)	-	0	-
Cl-11.6(Edge Loading Test)	-	0	-
Cl-11.7(Shock Resistance Test)	-	0	-
Cl-11.8(Buckling Resistance Test)	-	0	-
Cl-11.9(Slamming Test)	-	0	-
Cl-11.10(Misuse Test)	-	0	-
Cl-11.11(Varying Humidity Test)	-	0.01	-
Cl-11.12(End Immersion Test)	-	0	-
Cl-11.13(Glue Adhesion Test)	-	0	-
Cl-11.14(Screw Withdrawal Resistance Test)	-	0	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-6.1.1(Bulk density of timber)	-	0	Additional Testing charges for Clause 6.1.1, Table 2- 1200
Cl-9(Workmanship and finish)	-	0	-
Cl-5.1(Sized)	-	0	-
Cl-6.1.2(Moisture content in timbers)	-	0	-
Cl-6.2 S.No (1), i(Density, kg/m3 , Min)	-	0	-
Cl-6.2 S.No (1), ii(Moisture content, percent, Max)	-	0	-
Cl-6.2 S.No (1), iii(Water absorption, percent, Max)	-	0	-
Cl-6.2 S.No (1), iv(Swelling in water, percent, Max)	-	0	-
Cl-6.2 S.No (1), v(Modulus of rupture, N/mm2 , Min)	-	0	-
Cl-6.2 S.No (1), vi(Internal bond strength, N/mm2 , Min)	-	0	-
Cl-6.2 S.No (1), vii(Immersion in boiling water at (100 ± 3) °C for 4 h)	-	0	-
Cl-6.2 S.No (1), viii(Formaldehyde emission, mg/100 g, Max)	-	0	-
Cl- 6.3(Particle Boards as Core)	-	0	-
Cl- 6.4(Adhesive)	-	0	-
Cl- 6.5(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	-
Cl-11.1(Dimensions and Squareness Test)	-	0	-
Cl-11.2(General Flatness Test)	-	0	-
Cl-11.3(Local Planeness Test)	-	0	-
Cl-11.4(Impact Indentation Test)	-	0	-
Cl-11.5(Flexure Test)	-	0	-
Cl-11.6(Edge Loading Test)	-	0	-
Cl-11.7(Shock Resistance Test)	-	0	-
Cl-11.8(Buckling Resistance Test)	-	0	-
Cl-11.9(Slamming Test)	-	0	-
Cl-11.10(Misuse Test)	-	0	-
Cl-11.11(Varying Humidity Test)	-	0	-
Cl-11.12(End Immersion Test)	-	0	-
Cl-11.13(Glue Adhesion Test)	-	0	-
Cl-11.14(Screw Withdrawal Resistance Test)	-	0	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-6.1.1(Bulk density of timber)	-	0	-
Cl-9(Workmanship and finish)	-	0	-

12 Sep, 2028

-
Included w.e.f. 06.09.2024

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

All

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	0	Additional charges for testing MDF board (IS 12406) as BIS scope
Cl-7(Finish)	-	0	-
Cl-8.1(Dimensions of prelaminated MDF)	-	300	-
Cl-8.2(Tolerances)	-	0	-
Cl-8.2.1(Edge straightness)	-	300	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	600	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	0	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	600	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	0	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	2000	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	1000	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	3000	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	3000	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	500	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	500	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	2000	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	2000	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	1500	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	600	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	600	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	600	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	600	Testing charges-16700 (grade1) & 13700 (Grade 2) 20% discount to BIS GSTIN applicable as per govt rule
Cl-12(Marking)	-	0	-
Cl-11.2(Specific Requirement)	-	0	Additional Testing charges as per BIS scope for IS 12406 product
Cl-5.1(Medium Density Fibre (MDF) Board)	-	0	-
Cl-7(Finish)	-	0	-
Cl-8.1(Dimensions of prelaminated MDF)	-	0	-
Cl-8.2(Tolerances)	-	0	-
Cl-8.2.1(Edge straightness)	-	0	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	0	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	0	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	0	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	0	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	0	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	0	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	0	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	0	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	0	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	0	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	0	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	0	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	0	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	0	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	0	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	0	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	0	-
Cl-12(Marking)	-	0	-
Cl-11.2(Specific Requirement)	-	0	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	0	-
Cl-7(Finish)	-	0	-
Cl-8.1(Dimensions of prelaminated MDF)	-	0	-
Cl-8.2(Tolerances)	-	0	-
Cl-8.2.1(Edge straightness)	-	0	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	0	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	0	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	0	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	0	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	0	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	0	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	0	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	0	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	0	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	0	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	0	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	0	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	0	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	0	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	0	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	0	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	0	-
Cl-12(Marking)	-	0	-
Cl-11.2(Specific Requirement)	-	0	-

12 Sep, 2028

-
Included w.e.f 04.06.2024 Cl.8.2.1 (Edge straightness length restricted upto 5200mm Exclusion : Cl.9.1 (xii) (Steady state formaldehyde emission (optional)

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

All

24400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	0	Testing charges-23800 (BWP) & 21600 (MR), Additional charges as per clause
Cl-6.1.(Timber)	-	0	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	Additional testing charges for clause 6.2 as per BIS scope
Cl-6.3.1(Particle board)	-	0	Additional testing charges clause 6.3.1 as per BIS scope
Cl-6.3.2(MDF board and HDF board)	-	0	Additional testing charges clause 6.3.2 as per BIS scope
Cl-6.3.5(shutters with fibre hardboard face)	-	0	Additional testing charges as per test
Cl-8.1(Locks)	-	0	-
Cl-10.1(various test)	-	19800	-
Cl-10.2(End Immersion Test)	-	3400	2800 (BWP) & 600 (MR)
Cl-10.3(Glue Adhesion Test)	-	1200	-
Cl-13(Marking)	-	0	-
Cl-5(Sizes and Tolerances)	-	0	-
Cl-6.1.(Timber)	-	0	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	0	-
Cl-10.1(various test)	-	0	-
Cl-10.2(End Immersion Test)	-	0	-
Cl-10.3(Glue Adhesion Test)	-	0	-
Cl-13(Marking)	-	0	-

12 Sep, 2028

-
Included w.e.f. 27.06.2024 Full sheet upto thickness 45mm

IS 2191 : Part 1 (2022)

WOODEN FLUSH DOOR SHUTTERS CELLULAR TUBULAR AND HOLLOW CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Fifth Revision

All

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes)	-	0	Testing charges-24800 (BWP) & 22400 (MR), Additional charges as mention 20% discount to BIS GSTIN applicable as per govt rule
Cl-6.1.1(Species of timber)	-	0	-
Cl-6.3(Cross-Bands)	-	0	Additional testing charges for Cross Bands-2000
Cl-6.4.1(Commercial face veneers)	-	0	Additional testing charges for Commercial face veneer-2000
Cl-6.4.2(Decorative face veneers)	-	0	Additional testing charges for Decorative face veneer-2000
Cl-6.7(Particle Board)	-	0	Additional testing charges for Cl. 6.3 Particle Board-1200
Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	Additional testing charges for Cl. 6.8 as per BIS scope
Cl-11.1(Dimensions and Squareness Test)	-	400	-
Cl-11.2(General Flatness Test)	-	600	-
Cl-11.3(Local Planeness Test)	-	1250	-
Cl-11.4(Impact Indentation Test)	-	1250	-
Cl-11.5(Flexure Test)	-	1250	-
Cl-11.6(Edge Loading Test)	-	1250	-
Cl-11.7(Shock Resistance Test)	-	1250	-
Cl-11.8(Buckling Resistance Test)	-	1250	-
Cl-11.9(Slamming Test)	-	1250	-
Cl-11.10(Misuse Test)	-	1250	-
Cl-11.11(Varying Humidity Test)	-	7000	-
Cl-11.12(End Immersion Test)	-	3400	For MR-600, BWP-2800
Cl-11.13(Knife Test)	-	400	-
Cl-11.14(Glue Adhesion Test)	-	1200	-
Cl-11.15(Screw Withdrawal Resistance Test)	-	1500	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-5(Sizes)	-	0	-
Cl-6.1.1(Species of timber)	-	0	-
Cl-6.3(Cross-Bands)	-	0	-
Cl-6.4.1(Commercial face veneers)	-	0	-
Cl-6.4.2(Decorative face veneers)	-	0	-
Cl-6.7(Particle Board)	-	0	-
Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	0	-
Cl-11.1(Dimensions and Squareness Test)	-	0	-
Cl-11.2(General Flatness Test)	-	0	-
Cl-11.3(Local Planeness Test)	-	0	-
Cl-11.4(Impact Indentation Test)	-	0	-
Cl-11.5(Flexure Test)	-	0	-
Cl-11.6(Edge Loading Test)	-	0	-
Cl-11.7(Shock Resistance Test)	-	0	-
Cl-11.8(Buckling Resistance Test)	-	0	-
Cl-11.9(Slamming Test)	-	0	-
Cl-11.10(Misuse Test)	-	0	-
Cl-11.11(Varying Humidity Test)	-	0	-
Cl-11.12(End Immersion Test)	-	0	-
Cl-11.13(Knife Test)	-	0	-
Cl-11.14(Glue Adhesion Test)	-	0	-
Cl-11.15(Screw Withdrawal Resistance Test)	-	0	-
Cl-12.2(Sample Size)	-	0	-
Cl-14(Marking)	-	0	-
Cl-6.1.2(Moisture content of timber)	-	0	Extra Charges 800 for Clause 6.1.2

12 Sep, 2028

-
Included w.e.f. 27.06.2024 Full sheet upto thickness 45mm

IS 2046 (1995)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

All

25400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 , Table 1(CLASSIFICATION)	-	0	Complete Testing Charges-25400 20% discount to BIS GST applicable as per govt rule
5.1(Colour and Pattern)	-	100	-
5.2(Surface Finish)	-	100	-
5.2.2(Reverse side/Bonding)	-	0	-
5.3 ,Table 5(Thickness)	-	200	-
5.4(Appearance )	-	100	-
5.2.2(Sports, dirt and similar surface defects)	-	200	-
5.2.2(Fibres,hairs,scratches)	-	100	-
5.2.2(Accumulated(Combination)of surface defects)	-	100	-
5.2.2(Edge Defects)	-	100	-
5.2.2(Broken Corners )	-	100	-
5.4.4(Sanding Defects)	-	100	-
5.4.5 table 6(W arping (Flatness ))	-	200	-
5.4.6 (Length and width of a full size Laminate)	-	400	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.7,Fig. 2(Staightness of Edges)	-	200	-
5.4.8, Fig.3(Squareness of the Laminates)	-	200	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	1500	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	2000	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	1500	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	1800	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	1800	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	1000	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	1500	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	600	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	600	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	600	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	3500	-
5.5, Tables 7, Sr No.(x) Annex -O (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	600	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	1000	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	1000	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	600	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	600	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	1000	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	500	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	500	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	1000	-
7.2 a)(Marking)	-	0	-
7.2 b)(Marking)	-	0	-
7.2 c)(Marking)	-	0	-
7.2 d)(Marking)	-	0	-
7.2.1(Marking)	-	0	-
5 & 5.1(Colour & Pattern)	-	0	-
5.2(Surface & Finish)	-	0	-
5.2.2(Reverse side Bonding)	-	0	-
5.3(Nominal thickness)	-	0	-
5.4.1.1(Surface defects)	-	0	-
5.4.1.2(Fiber hair scratches)	-	0	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	0	-
5.4.2(Edge defect)	-	0	-
5.4.3(Broken corner)	-	0	-
5.4.4(Sanding defect)	-	0	-
5.4.5(Warping(Flatness))	-	0	-
5.4.6(Length)	-	0	-
5.4.6(Width)	-	0	-
5.4.7(Straightness of edge)	-	0	-
5.4.8(Squreness of laminate)	-	0	-
5.5Table-7(1(Surfacewear)	-	0	-
Table-7(2(Immesion in boiling water)	-	0	-
Table-7(3(Dry heat resistance)	-	0	-
Table-7(4(Dimensional stability)	-	0	-
Table-7(6(Impact by small dia.Ball)	-	0	-
Table-7(7(Impact by large dia.Ball)	-	0	-
Table-7(8(Cracking resistance)	-	0	-
Table-7(9(Scracting resistance)	-	0	-
Table-7(10(Staining resistance)	-	0	-
Table-7(10(Colour change(Xenon arc resis))	-	0	-
Table-7(11(Cigarette burn resistance)	-	0	-
Table-7(12(Formability)	-	0	-
Table-7(13(Blistering)	-	0	-
Table-7(14(Steam resistance)	-	0	-
Table-7(15(Crazing reistance)	-	0	-
Table-7(16(Moisture reistance)	-	0	-
Table-8(17(Flexural Modulus)	-	0	-
Table-8(18(Flexural strength)	-	0	-
Table-8(19(Tensile strength)	-	0	-
4 , Table 1(CLASSIFICATION)	-	0	-
5.1(Colour and Pattern)	-	0	-
5.2(Surface Finish)	-	0	-
5.2.2(Reverse side/Bonding)	-	0	-
5.3 ,Table 5(Thickness)	-	0	-
5.4(Appearance )	-	0	-
5.2.2(Sports, dirt and similar surface defects)	-	0	-
5.2.2(Fibres,hairs,scratches)	-	0	-
5.2.2(Accumulated(Combination)of surface defects)	-	0	-
5.2.2(Edge Defects)	-	0	-
5.2.2(Broken Corners )	-	0	-
5.4.4(Sanding Defects)	-	0	-
5.4.5 table 6(W arping (Flatness ))	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.7,Fig. 2(Staightness of Edges)	-	0	-
5.4.8, Fig.3(Squareness of the Laminates)	-	0	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	0	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	0	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	0	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	0	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	0	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	0	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	0	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	0	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	0	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	0	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	0	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	0	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	0	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	0	-
7.2 a)(Marking)	-	0	-
7.2 b)(Marking)	-	0	-
7.2 c)(Marking)	-	0	-
7.2 d)(Marking)	-	0	-
7.2.1(Marking)	-	0	-
5 & 5.1(Colour & Pattern)	-	0	-
5.2(Surface & Finish)	-	0	-
5.2.2(Reverse side Bonding)	-	0	-
5.3(Nominal thickness)	-	0	-
5.4.1.1(Surface defects)	-	0	-
5.4.1.2(Fiber hair scratches)	-	0	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	0	-
5.4.2(Edge defect)	-	0	-
5.4.3(Broken corner)	-	0	-
5.4.4(Sanding defect)	-	0	-
5.4.5(Warping(Flatness))	-	0	-
5.4.6(Length)	-	0	-
5.4.6(Width)	-	0	-
5.4.7(Straightness of edge)	-	0	-
5.4.8(Squreness of laminate)	-	0	-
5.5Table-7(1(Surfacewear)	-	0	-
Table-7(2(Immesion in boiling water)	-	0	-
Table-7(3(Dry heat resistance)	-	0	-
Table-7(4(Dimensional stability)	-	0	-
Table-7(6(Impact by small dia.Ball)	-	0	-
Table-7(7(Impact by large dia.Ball)	-	0	-
Table-7(8(Cracking resistance)	-	0	-
Table-7(9(Scracting resistance)	-	0	-
Table-7(10(Staining resistance)	-	0	-
Table-7(10(Colour change(Xenon arc resis))	-	0	-
Table-7(11(Cigarette burn resistance)	-	0	-
Table-7(12(Formability)	-	0	-
Table-7(13(Blistering)	-	0	-
Table-7(14(Steam resistance)	-	0	-
Table-7(15(Crazing reistance)	-	0	-
Table-7(16(Moisture reistance)	-	0	-
Table-8(17(Flexural Modulus)	-	0	-
Table-8(18(Flexural strength)	-	0	-
Table-8(19(Tensile strength)	-	0	-
4 , Table 1(CLASSIFICATION)	-	0	-
5.1(Colour and Pattern)	-	0	-
5.2(Surface Finish)	-	0	-
5.2.2(Reverse side/Bonding)	-	0	-
5.3 ,Table 5(Thickness)	-	0	-
5.4(Appearance )	-	0	-
5.2.2(Sports, dirt and similar surface defects)	-	0	-
5.2.2(Fibres,hairs,scratches)	-	0	-
5.2.2(Accumulated(Combination)of surface defects)	-	0	-
5.2.2(Edge Defects)	-	0	-
5.2.2(Broken Corners )	-	0	-
5.4.4(Sanding Defects)	-	0	-
5.4.5 table 6(W arping (Flatness ))	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.7,Fig. 2(Staightness of Edges)	-	0	-
5.4.8, Fig.3(Squareness of the Laminates)	-	0	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	0	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	0	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	0	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	0	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	0	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	0	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	0	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	0	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	0	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	0	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	0	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	0	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	0	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	0	-
7.2 a)(Marking)	-	0	-
7.2 b)(Marking)	-	0	-
7.2 c)(Marking)	-	0	-
7.2 d)(Marking)	-	0	-
7.2.1(Marking)	-	0	-
5 & 5.1(Colour & Pattern)	-	0	-
5.2(Surface & Finish)	-	0	-
5.2.2(Reverse side Bonding)	-	0	-
5.3(Nominal thickness)	-	0	-
5.4.1.1(Surface defects)	-	0	-
5.4.1.2(Fiber hair scratches)	-	0	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	0	-
5.4.2(Edge defect)	-	0	-
5.4.3(Broken corner)	-	0	-
5.4.4(Sanding defect)	-	0	-
5.4.5(Warping(Flatness))	-	0	-
5.4.6(Length)	-	0	-
5.4.6(Width)	-	0	-
5.4.7(Straightness of edge)	-	0	-
5.4.8(Squreness of laminate)	-	0	-
5.5Table-7(1(Surfacewear)	-	0	-
Table-7(2(Immesion in boiling water)	-	0	-
Table-7(3(Dry heat resistance)	-	0	-
Table-7(4(Dimensional stability)	-	0	-
Table-7(6(Impact by small dia.Ball)	-	0	-
Table-7(7(Impact by large dia.Ball)	-	0	-
Table-7(8(Cracking resistance)	-	0	-
Table-7(9(Scracting resistance)	-	0	-
Table-7(10(Staining resistance)	-	0	-
Table-7(10(Colour change(Xenon arc resis))	-	0	-
Table-7(11(Cigarette burn resistance)	-	0	-
Table-7(12(Formability)	-	0	-
Table-7(13(Blistering)	-	0.01	-
Table-7(14(Steam resistance)	-	0	-
Table-7(15(Crazing reistance)	-	0	-
Table-7(16(Moisture reistance)	-	0	-
Table-8(17(Flexural Modulus)	-	0.01	-
Table-8(18(Flexural strength)	-	0	-
Table-8(19(Tensile strength)	-	0	-

12 Sep, 2028

-
Included w.e.f 27.11.2024 Exclusion Cl 5.5, Tables 7, (xi) (Resistance to Cigarette burns) Cl 5.5, Tables 7, (xiv) (Formability Method B) Cl 5.5, Tables 7, (xiv) (Resistance to Blistering Method B)

IS 14315 (1995)

Commercial Veneers -specification

Type A & B

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 (i)(Discolouration)	-	100	-
4 (ii)(Dote)	-	50	-
4 (iii)(Insect Hole)	-	50	-
4 (iv)(Joints)	-	50	-
4 (v)(Knots (dead))	-	50	-
4 (vi)(Pin Knots (dead))	-	50	-
4 (vii)(Pin Knots (live))	-	50	-
4 (viii)(Knots (tight))	-	50	-
4 (ix)(Patches)	-	50	-
4 (x)(Splits)	-	100	-
4 (xi)(Swirl)	-	100	-
5(Manufacture)	-	0	-
6(Face Veneer)	-	50	-
7(Core and Crossband veneer)	-	50	-
8(Joints in veneers)	-	50	-
9.2(Dimension)	-	200	-
9.3(Thickness)	-	150	-
9.4.1 (Tolerances)	-	100	-
9.4.2(Squarenes)	-	100	-
9.4.3(Edge Straightness)	-	100	Face Veneer-1500, Core/Cross band-1500 GSTIN as per govt rule 20% discount to BIS
11(Marking)	-	0	-
4 (i)(Discolouration)	-	0	-
4 (ii)(Dote)	-	0	-
4 (iii)(Insect Hole)	-	0	-
4 (iv)(Joints)	-	0	-
4 (v)(Knots (dead))	-	0	-
4 (vi)(Pin Knots (dead))	-	0	-
4 (vii)(Pin Knots (live))	-	0	-
4 (viii)(Knots (tight))	-	0	-
4 (ix)(Patches)	-	0	-
4 (x)(Splits)	-	0	-
4 (xi)(Swirl)	-	0	-
5(Manufacture)	-	0	-
6(Face Veneer)	-	0	-
7(Core and Crossband veneer)	-	0	-
8(Joints in veneers)	-	0	-
9.2(Dimension)	-	0	-
9.3(Thickness)	-	0	-
9.4.1 (Tolerances)	-	0	-
9.4.2(Squarenes)	-	0	-
9.4.3(Edge Straightness)	-	0	-
11(Marking)	-	0	-

12 Sep, 2028

-
Included w.e.f. 16.01.2024

IS 3097 (2006)

Veneered Particle Boards -Specification

All

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 3(TERMINOLOGY)	-	0	-
Clause No - 4(GRADES AND TYPES)	-	0	-
Clause No - 5.1(Particle Board)	-	14700	Grade 1-14700, Grade 2-11700
Clause No - 5.2.1.1("Timbers for face veneers of decorative type veneered particle boards")	-	0	-
Clause No - 5.2.1.1(a)("particle boards, shall be of Type A or Type B surface ")	-	0	-
Clause No - 5.3(Adhesive)	-	8000	MR grade-7200 & BWR & BWP-8000
Clause No - 6.1(Preservative Treatment of Veneers)	-	0	-
Clause No - 6.2.7(Lipping)	-	0	-
Clause No - 7(Dimensional Tolerance)	-	800	-
Clause No - 9.1 (1(cutting the test specimens)	-	0	-
Clause No - 9.1 (2(" method of preparation and conditioning oftest specimens")	-	0	-
Clause No - 9.1 (a(Determination of density)	-	800	-
Clause No - 9.1 (b(Determination of moisture content)	-	800	-
Clause No - 9.1 (c(Water absorption)	-	1500	-
Clause No - 9.1 (e) (1(Determination of swelling in water - Swelling due to general absorption)	-	2000	-
Clause No - 9.1 (e) (2(Determination of swelling in water -Swelling due to surface absorption)	-	2000	-
Clause No - 9.1 (g)("Modulus of rupture (MOR) and modulus of elasticity (MOE) ")	-	1500	-
Clause No - 9.1 (h)("Determination of deflection under sustained load (long time loading test)")	-	1000	-
Clause No - 11(MARKING)	-	0	-
Clause No - 3(TERMINOLOGY)	-	0	-
Clause No - 4(GRADES AND TYPES)	-	0	-
Clause No - 5.1(Particle Board)	-	0	-
Clause No - 5.2.1.1("Timbers for face veneers of decorative type veneered particle boards")	-	0	-
Clause No - 5.2.1.1(a)("particle boards, shall be of Type A or Type B surface ")	-	0	-
Clause No - 5.3(Adhesive)	-	0	-
Clause No - 6.1(Preservative Treatment of Veneers)	-	0	-
Clause No - 6.2.7(Lipping)	-	0	-
Clause No - 7(Dimensional Tolerance)	-	0	-
Clause No - 9.1 (1(cutting the test specimens)	-	0	-
Clause No - 9.1 (2(" method of preparation and conditioning oftest specimens")	-	0	-
Clause No - 9.1 (a(Determination of density)	-	0	-
Clause No - 9.1 (b(Determination of moisture content)	-	0	-
Clause No - 9.1 (c(Water absorption)	-	0	-
Clause No - 9.1 (e) (1(Determination of swelling in water - Swelling due to general absorption)	-	0	-
Clause No - 9.1 (e) (2(Determination of swelling in water -Swelling due to surface absorption)	-	0	-
Clause No - 9.1 (g)("Modulus of rupture (MOR) and modulus of elasticity (MOE) ")	-	0	-
Clause No - 9.1 (h)("Determination of deflection under sustained load (long time loading test)")	-	0	-
Clause No - 11(MARKING)	-	0	-
Clause 9.1 d) Water Resistance test(Clause 9.1 d) Water Resistance test)	-	1500	-
9.1 f)Adhesion of plies(9.1 f)Adhesion of plies)	-	500	Testing charges-38500 (Separate testing charges- IS 3097-15800, Particle board-Grade 14700 & Grade 2-11700, Adhesive-MR-7200 & BWR & BWP-8000) 20% Discount to BIS GSTIN as per govt rule

12 Sep, 2028

-
Included w.e.f. 16.01.2024

IS 15786 (2008)

Prelaminated cement bonded particle board - Specification

All

32900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 10.3 (Moisture content)	-	600	-
Clause 10.3 (Moisture content)	-	0	-
Clause 10.3 (Moisture content)	-	0	-
5.1(Cement Bonded Particle Board)	-	14400	-
5.2(Impregnated Base Paper)	-	1000	-
5.3(Impregnated OverlaylUnderIay)	-	1000	-
5.4(Finished Foil)	-	1000	-
6(Manufacture)	-	0	-
7(Finish)	-	0	-
8(DIMENSIONS AND TOLERANCES)	-	600	-
10.2(Test for Density)	-	600	-
10.4(Test for Water Absorption)	-	1200	-
10.5(Test for Swelling in Water)	-	1200	-
10.6(Test for Modulus of Elasticity and Modulus of Rupture)	-	1000	-
10.7(Test for Tensile Strength Perpendicular to Surface)	-	1000	-
10.8(Test for Tensile Strength Perpendicular to Surface After Ageing)	-	3000	-
10.9(Test for Screw Withdrawal Strength)	-	2000	Face-1000 Edge-1000
10.10(Test for Abrasion Resistance)	-	1500	-
10.11(Test for Resistance to Steam)	-	600	-
10.12(Test for Resistance to Crack)	-	600	-
10.13(Test for Resistance to Cigarette Bum)	-	600	-
10.14(Test for Resistance to Stain)	-	600	Complete Testing Charges IS-32900 (For IS 15786 physical tests-15500, Raw material cl. 5.2, 5.3, 5.4-3000, IS 14276 as per clause 5.1-14400 ) 20% discount to BIS GSTIN as per govt. rule
11(Marking)	-	0	-

12 Sep, 2028

-
Included w.e.f. 16.01.2024

IS 14276 (2016)

Cement bonded particle boards - Specification (First Revision)

All

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Finish)	-	400	-
7(Dimensions and Tolerances)	-	600	-
8.5(Workability)	-	500	-
10.3, Table-1(Test for Density)	-	600	-
10.5, Table-1(Test for Water Absorption)	-	1200	-
10.6, Table-1(Test for swelling in water)	-	2000	-
10.7, Table-1(Test for modulus of Rupture)	-	1500	Dry & Wet
10.8, Table-1(Test for modulus of Elasticity)	-	1500	Dry & Wet
10.9, Table-1(Test for tensile strength perpendicular to Surface)	-	3500	Dry-1000 & Cyclic-2500
10.1, Table-1(Test for Screw Withdrawal Strength)	-	2000	-
Clause 8.2 Table 1(Moisture content)	-	600	20% discount to BIS GSTIN as per govt. rule

12 Sep, 2028

-
Included w.e.f. 05.01.2024

IS 14616 (1999)

Laminated veneer lumber specification

All (upto 50 mm)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Dimensions)	-	200	Total testing charges-17700(upto 50mm testing only) 20% discount to BIS GSTIN as per govt rule
6.2(Dimensions)	-	200	-
7(workmanship and finish)	-	600	-
8.2.2(adhesion of plies)	-	4900	Dry State-400, After Cyclic test-2000, After Mycological test-2500
8.2.3, 8.2.4, Table-1(modulus of rupture)	-	1500	-
8.2.3, 8.2.4, Table-1(modulus of elasticity)	-	1500	-
8.2.3, 8.2.4, Table-1(compressive strength parallel to grain)	-	1500	-
8.2.3, 8.2.4, Table-1(horizontal shear a)-parallel to grain ,b)-perpendicular to grain)	-	3000	-
8.2.3, 8.2.4, Table-1(tensile strength parallel to grain )	-	2000	-
8.2.3, 8.2.4, Table-1(screw holding power a)-parallel to grain ,b)-perpendicular to grain)	-	2000	-
8.2.3, 8.2.4, Table-1(thickness swelling in 2 hrs. water soaking)	-	0	-
8.2.4(swelling in wear)	-	800	-
Clause 8.2.1(Moisture content)	-	800	-
8.2.1(moisture content)	-	800	-
6.1(Dimensions)	-	0	-
6.2(Dimensions)	-	0	-
7(workmanship and finish)	-	0	-
8.2.2(adhesion of plies)	-	0	-
8.2.3, 8.2.4, Table-1(modulus of rupture)	-	0	-
8.2.3, 8.2.4, Table-1(modulus of elasticity)	-	0	-
8.2.3, 8.2.4, Table-1(compressive strength parallel to grain)	-	0	-
8.2.3, 8.2.4, Table-1(horizontal shear a)-parallel to grain ,b)-perpendicular to grain)	-	0	-
8.2.3, 8.2.4, Table-1(tensile strength parallel to grain )	-	0	-
8.2.3, 8.2.4, Table-1(screw holding power a)-parallel to grain ,b)-perpendicular to grain)	-	0	-
8.2.3, 8.2.4, Table-1(thickness swelling in 2 hrs. water soaking)	-	0	-
8.2.4(swelling in wear)	-	0	-
Clause 8.2.1(Moisture content)	-	0	-
8.2.1(moisture content)	-	0	-

12 Sep, 2028

-
Included w.e.f. 16.01.2024

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

All

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	2000	Extra charges for Clause 6.1-2000
Clause No -6.2(Alternative Materials (LVL)	-	17500	Extra charges for Clause 6.2-17500
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	11700	Extra charges for Clause 6.2-11700
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	13800	Extra charges for Clause 6.2-13800
Clause No -6.2(Alternative Materials -plywood)	-	17500	Extra charges for Clause 6.2-for IS 710-12600 & IS 303-4900
Clause No -6.2(BWP grade flush door shutter)	-	0	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	14700	Extra charges for Clause 6.3.1for IS 3087-14700
Clause No -6.4(Adhesive)	-	8000	Extra Charges for Clause 6.4 for MR-7200 & BWP-8000
Clause No -7.1(Construction)	-	0	-
Clause No - 7.3(" MDF board or HDF board ")	-	0	-
Clause No -9.2("Workmanship and finish")	-	200	-
Clause No -10.1(tests for flush door shutters)	-	20000	-
Clause No -10.2(End Immersion Test)	-	3400	BWP-2800, MR-600
Clause No -10.3(Glue Adhesion Test)	-	1200	Testing Charges for -24200-BWP & 22000-MR Extra charges for Clause 6.1, 6.2, 6.3, 6.4, 6.5, 7.2 raw material as mention in remarks 20% discount to BIS GSTIN applicable as per govt rule
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
Clause No - 6.1(Timber)	-	0	-
Clause No -6.2(Alternative Materials (LVL)	-	0	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	-
Clause No -6.2(Alternative Materials -plywood)	-	0	-
Clause No -6.2(BWP grade flush door shutter)	-	0	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	-
Clause No -6.4(Adhesive)	-	0	-
Clause No -7.1(Construction)	-	0	-
Clause No - 7.3(" MDF board or HDF board ")	-	0	-
Clause No -9.2("Workmanship and finish")	-	0	-
Clause No -10.1(tests for flush door shutters)	-	0	-
Clause No -10.2(End Immersion Test)	-	0	-
Clause No -10.3(Glue Adhesion Test)	-	0	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
5(SIZES AND TOLERANCES)	-	0	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	800	Testing Charges for -24200-BWP & 22000-MR Extra charges for Clause 6.1, 6.2, 6.3, 6.4, 6.5, 7.2 raw material as mention in remarks 20% discount to BIS GSTIN applicable as per govt rule

12 Sep, 2028

-
Included w.e.f. 16.01.2024

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

BWP/MR/All type Designation

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	100	Testing charges-22600 (MR) & 24800 (BWP) 20% discount to BIS GSTIN applicable as per govt rule
9.2(Workmanship & Finish)	-	100	-
9.3(Workmanship & Finish)	-	100	-
11.1(Dimensions - Height)	-	50	-
11.1(Dimensions - Width)	-	50	-
11.1(Dimensions - Thickness)	-	150	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	150	-
11.12(End immersion test)	-	3400	BWP-2800, MR-600
11.13(Knife Test)	-	400	-
11.14(Glue Adhesion Test)	-	1200	-
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	0	-
11.1(Dimensions - Width)	-	0	-
11.1(Dimensions - Thickness)	-	0	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	0	-
11.12(End immersion test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	Extra charges-1500 for Cl. 7.1.1
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	Extra charges-1500 for Cl. 7.1.1
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	Extra charges-1500 for Cl. 7.1.1
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	600	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	1250	-
11.4(Impact Indentation Test)	-	1250	-
11.4(Impact Indentation Test)	-	1250	-
11.5(Flexure Test)	-	1250	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	1250	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	1250	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	1250	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	1250	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	1250	-
11.11(Varying Humidity Test)	-	7000	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	1500	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	Extra charges for Cl. 6.1.3-800
Clause 6.2.1(Plywood)	-	0	Extra charges for Cl. 6.2.1-IS 303-4900 & IS 710-12600
Clause 6.2.2(Decorative plywood)	-	0	Extra charges for Cl. 6.2.2-4700
Clause 6.3(Cross-Bands)	-	0	Extra charges for Cl. 6.3-1500
Clause 6.4.1(Commercial Face Veneers)	-	0	Extra charges for Cl. 6.4.1-1500
Clause 6.4.2(Decorative Face Veneers)	-	0	Extra charges for Cl. 6.4.2-1500
Clause 6.6.1(Adhesives)	-	8000	Extra charges for Cl. 6.6.1-BWP-8000 & MR-7200
Clause 6.7(Particle Board)	-	0	Extra charges for Cl. 6.7-1200(swelling in thickness due to general absorption)
Clause 6.8(Medium density fibre board)	-	0	Extra charges for Cl. 6.8-1200(swelling in thickness due to general absorption)
Clause 6.9(Alternative Materials)	-	0	Extra charges for Cl. 6.9-For IS 14616-17700, IS 16171-11700, IS 12406-13800, IS 710-12600, IS 303-4900
Clause 7.1(Blockboard Core)	-	0	Extra charges for Cl. 7.1-1500
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	100	-
Clause 7.5(Face Panel)	-	0	Extra charges for Cl. 7.5-1500
Clause 7.6(Lipping)	-	100	-
Clause 7.7(Rebating)	-	100	-
Clause 7.8(Opening for Glazing)	-	100	-
Clause 7.9(Venetian)	-	100	-
Clause 8.1(Locks)	-	100	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	0	-
11.1(Dimensions - Width)	-	0	-
11.1(Dimensions - Thickness)	-	0	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	0	-
11.12(End immersion test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	0	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	0	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-

12 Sep, 2028

-
Included w.e.f. 16.01.2024

IS 13801 (2013)

Chequered Cement Concrete Tiles -

All

7350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	600	Complete Testing Charges-7350 20% discount to BIS GSTIN Applicable as per govt rule
Cl 12.1(Concavity & Convexity )	-	750	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	750	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	750	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.5(Wet transverse strength)	-	1000	-
Cl 12.6(Resistance to wear)	-	2000	-
Cl 11(Finish)	-	500	GSTIN applicable as per govt rule 20% discount to BIS
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	0	-
Cl 12.1(Concavity & Convexity )	-	0	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	0	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.4(Water absorption)	-	0	-
Cl 12.5(Wet transverse strength)	-	0	-
Cl 12.6(Resistance to wear)	-	0	-
Cl 11(Finish)	-	0	-
8.3(Thickness of wearing layer)	-	0	-

12 Sep, 2028

-
-

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

All

21700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.20(Spacer nibs)	-	0	(19700 without optional test, 21700 with optional test) 20% discount to BIS GSTIN extra as per govt rule
Clause 7.1.1 (General Quality)	-	400	Spacer nibs charges included 20% discount to BIS GSTIN extra as per govt rule
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.1.3 (Colour and Texture)	-	0	Charges Included in Visual inspection 20% discount to BIS GSTIN extra as per govt rule
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	Charges Included in Visual inspection 20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	0	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	250	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	0	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	250	20% discount to BIS GSTIN extra as per govt rule
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2000	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	3200	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2300	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	2400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	2400	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex G(Individual Breaking Load)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3, Annex G(Average Breaking Load)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	500	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	20% discount to BIS GSTIN extra as per govt rule
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	20% discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
Amendment No. 1 included w.e.f. 10-04-2023

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

Grade 1 & Grade 2

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	600	(For Exterior Grade, Grade-1-13800 & Interior Grade, Grade-2-10800) 20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	0	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	600	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	0	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	3000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	3000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	500	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	500	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	2000	20% discount to BIS GSTIN extra applicable as per govt. rule
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2000	20% discount to BIS GSTIN extra applicable as per govt. rule
8(DIMENSIONS AND TOLERANCES)	-	600	20% discount to BIS GSTIN extra applicable as per govt. rule

12 Sep, 2028

-
Excluding Table-3 (xii) Steady-State Formaldehyde Emission

IS 10701 (2012)

Structural plywood - Specification (First Revision)

17650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 11.2(Moisture content)	-	400	20% discount for BIS GSTIN extra as per govt rule
11.3(Glue Shear strength in dry state)	-	1000	20% discount for BIS GSTIN extra as per govt rule
11.4.1(Resistance to Water)	-	2500	20% discount for BIS GSTIN extra as per govt rule
11.5(Resistance to Micro-organisms)	-	2800	20% discount for BIS GSTIN extra as per govt rule
11.6(Tensile Strength)	-	1000	20% discount for BIS GSTIN extra as per govt rule
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	6150	20% discount for BIS GSTIN extra as per govt rule
11.8(Wet Bending Strength)	-	2000	20% discount for BIS (Retention of preservative-1000)

12 Sep, 2028

-
-

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

All

7250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirements)	-	100	20% discount for BIS GSTIN extra as per govt rule
3.2(General Requirements)	-	200	20% discount for BIS GSTIN extra as per govt rule
3.3(General Requirements)	-	0	20% discount for BIS GSTIN extra as per govt rule
3.4(General Requirements)	-	100	20% discount for BIS GSTIN extra as per govt rule
3.5(General Requirements)	-	100	20% discount for BIS GSTIN extra as per govt rule
5.1(Dimensions)	-	1000	20% discount for BIS GSTIN extra as per govt rule
7.1, Table -1(Average Wet Compressive Strength)	-	1500	20% discount for BIS GSTIN extra as per govt rule
7.2(Drying Shrinkage)	-	1500	20% discount for BIS GSTIN extra as per govt rule
7.3(Efflorescence Test)	-	2000	20% discount for BIS GSTIN extra as per govt rule
7.4(Water Absorption)	-	750	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

IS 13757 (1993)

Burnt Clay Fly Ash Building Bricks-specification

All

5750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(GENERAL QUALITY)	-	500	20% discount for BIS GSTIN extra as per govt rule
6.1(Dimensions)	-	1000	20% discount for BIS GSTIN extra as per govt rule
6.2(Tolerances)	-	0	20% discount for BIS GSTIN extra as per govt rule
7.1(Compressive Strength)	-	1500	20% discount for BIS GSTIN extra as per govt rule
7.2(Water Absorption)	-	750	20% discount for BIS GSTIN extra as per govt rule
7.3(Efforescence)	-	2000	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

IS 16720 (2018)

Pulverized Fuel Ash-Cement Bricks- Specification

All

5750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and fig.1A &1B(Dimensions- Length (L) )	-	300	20% discount for BIS GSTIN extra as per govt rule
4.1 and fig.1A &1B(Dimensions- Width (B) )	-	300	20% discount for BIS GSTIN extra as per govt rule
4.1 and fig.1A &1B(Dimensions- Height (H))	-	300	20% discount for BIS GSTIN extra as per govt rule
4.1 & 4.3 and fig.1A &1B(Dimensions - Depth)	-	100	20% discount for BIS GSTIN extra as per govt rule
4.1 and fig.1A &1B(Dimensions)	-	0	20% discount for BIS GSTIN extra as per govt rule
5 and Tanle 1 (CLASSIFICATION)	-	0	20% discount for BIS GSTIN extra as per govt rule
8.1(GENERAL)	-	500	20% discount for BIS GSTIN extra as per govt rule
8.3(Density Annex C of IS 2185 (Part 1))	-	500	20% discount for BIS GSTIN extra as per govt rule
8.4 and Table 1(Compressive Strength - Individual IS 3495 (Part 1))	-	1500	20% discount for BIS GSTIN extra as per govt rule
8.5(Drying Shrinkage IS 4139)	-	1500	20% discount for BIS GSTIN extra as per govt rule
8.6(Water Absorption IS 3495 (Part 2))	-	750	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

7350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	600	20% discount for BIS GSTIN extra as per govt rule
Cl 11(Suface Finish)	-	500	20% discount for BIS GSTIN extra as per govt rule
Cl 12.2(Concavity & Convexity )	-	750	20% discount for BIS GSTIN extra as per govt rule
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	750	20% discount for BIS GSTIN extra as per govt rule
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	750	20% discount for BIS GSTIN extra as per govt rule
Cl 12.5(Water absorption)	-	1000	20% discount for BIS GSTIN extra as per govt rule
Cl 12.6(Wet transverse strength )	-	1000	20% discount for BIS GSTIN extra as per govt rule
Cl 12.7(Resistance to wear)	-	2000	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

IS 15558 (2005)

Mini domestic water heater for use with LPG - Specification

All

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.2(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.3(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.4(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.5(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.6(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.7(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.8(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.9(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.10(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.11(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
4.1.12(Construction)	-	50	20% discount for BIS GSTIN extra as per Govt rule
5.1(Materials)	-	0	20% discount for BIS GSTIN extra as per Govt rule
5.2(Materials)	-	200	20% discount for BIS GSTIN extra as per Govt rule
5.3(Materials)	-	100	20% discount for BIS GSTIN extra as per Govt rule
5.4(Materials)	-	200	20% discount for BIS GSTIN extra as per Govt rule
5.5(Materials)	-	0	20% discount for BIS GSTIN extra as per Govt rule
6.1(Connections)	-	100	20% discount for BIS GSTIN extra as per Govt rule
6.2(Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
6.3(Connections)	-	100	20% discount for BIS GSTIN extra as per Govt rule
6.4(Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
6.5(Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
6.6(Gas Inlet Connections)	-	200	20% discount for BIS GSTIN extra as per Govt rule
7(Flame Visibility)	-	100	20% discount for BIS GSTIN extra as per Govt rule
8(Gas Taps)	-	200	20% discount for BIS GSTIN extra as per Govt rule
9(Flame Failure Device)	-	200	20% discount for BIS GSTIN extra as per Govt rule
10(Ignition Device)	-	100	20% discount for BIS GSTIN extra as per Govt rule
11(Protection Against Accidental Overheating)	-	500	20% discount for BIS GSTIN extra as per Govt rule
12(Water Rate Adjuster)	-	500	20% discount for BIS GSTIN extra as per Govt rule
14(Gas Soundness)	-	200	20% discount for BIS GSTIN extra as per Govt rule
15(Water Soundness)	-	300	20% discount for BIS GSTIN extra as per Govt rule
16(Thermal Efficiency)	-	1500	20% discount for BIS GSTIN extra as per Govt rule
17(Combustion)	-	500	20% discount for BIS GSTIN extra as per Govt rule
18(Gas Consumption)	-	2000	20% discount for BIS GSTIN extra as per Govt rule
19.1(Ignition and flame travel)	-	100	20% discount for BIS GSTIN extra as per Govt rule
19.2(Ignition and flame travel)	-	150	20% discount for BIS GSTIN extra as per Govt rule
19.3(Ignition and flame travel)	-	150	20% discount for BIS GSTIN extra as per Govt rule
20(Flame Stability)	-	200	20% discount for BIS GSTIN extra as per Govt rule
21(Noise Control)	-	200	20% discount for BIS GSTIN extra as per Govt rule
22(Flash Back)	-	300	20% discount for BIS GSTIN extra as per Govt rule
23(Resistance to Draught)	-	300	20% discount for BIS GSTIN extra as per Govt rule
24(Fire Hazard And Limiting Temperature )	-	400	20% discount for BIS GSTIN extra as per Govt rule
25(Time For Temperature Rise)	-	500	20% discount for BIS GSTIN extra as per Govt rule
26(Hot Water Output Test)	-	500	20% discount for BIS GSTIN extra as per Govt rule
27(Marking)	-	0	20% discount for BIS GSTIN extra as per Govt rule

12 Sep, 2028

-
-

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

All

21450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	900		20% discount for BIS GSTIN extra as per Govt rule

12 Sep, 2028

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

19700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	100	20% discount for BIS
6.1.3(Physical requirement)	-	100	20% discount for BIS
6.1.4(Physical requirement)	-	100	20% discount for BIS
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	20% discount for BIS
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	400	20% discount for BIS
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	20% discount for BIS
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	400	20% discount for BIS
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	20% discount for BIS
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	400	20% discount for BIS
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	100	20% discount for BIS
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	200	20% discount for BIS
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	200	20% discount for BIS
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	100	20% discount for BIS
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	400	20% discount for BIS
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	100	20% discount for BIS
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	20% discount for BIS
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	20% discount for BIS
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	20% discount for BIS
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	20% discount for BIS
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	600	20% discount for BIS
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	100	20% discount for BIS
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	600	20% discount for BIS
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	100	20% discount for BIS
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	600	20% discount for BIS
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	100	20% discount for BIS
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	0	20% discount for BIS
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1400	20% discount for BIS
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	100	20% discount for BIS
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	100	20% discount for BIS
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens))	-	100	20% discount for BIS
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	3000	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	1800	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	200	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	1800	20% discount for BIS
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	200	20% discount for BIS
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	2000	20% discount for BIS
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	200	20% discount for BIS
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	200	20% discount for BIS
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	2000	20% discount for BIS
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	100	20% discount for BIS
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	200	20% discount for BIS
Annex-G-7(AVERAGE BREAKING LOAD)	-	100	20% discount for BIS GSTIN extra as per govt rule

12 Sep, 2028

-
Amendment 3 & 4 included w.e.f. 21-07-2020.

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 (Table 1)(b) 6 mm and above)	-	400		20% discount for BIS

12 Sep, 2028

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Water for Costruction Purpose

6000 View breakup
Rs.4000/- for water for construction purpose Rs. 2000/- for concrete cube testing

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 (b)(Alkalinity)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 (a)(Acidity)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (i)(Organic Solids)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (iii)(Sulphate)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (iv)(Chloride)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 Table 1 (v)(Suspended Matter)	-	500	20% discount to BIS GSTIN extra as per govt rule
Cl 5.4 .2(pH)	-	500	20% discount to BIS GSTIN extra as per govt rule
16.1(Average Compressive Strength)	-	200	20% discount to BIS GSTIN extra as per govt rule
16.1(Compressive Strength of Individual Samples )	-	600	20% discount to BIS GSTIN extra as per govt rule
16.1(Compressive Strength of Individual Samples )	-	600	20% discount to BIS GSTIN extra as per govt rule
16.1(Compressive Strength of Individual Samples )	-	600	(Construction Water-4000 & Compressive Strength-2000) 20% discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
Only for water for construction purpose as per cl.5.4

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

BWP/CS,CSC,CSFF

13100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	0	20 % discount to BIS GSTIN extra as per govt rule
7.2(DIMENSIONS & TOLERANCES )	-	50	20 % discount to BIS
7.2(DIMENSIONS & TOLERANCES )	-	50	20 % discount to BIS
7.3(DIMENSIONS & TOLERANCES )	-	80	20 % discount to BIS
7.4(DIMENSIONS & TOLERANCES )	-	80	20 % discount to BIS
7.4(DIMENSIONS & TOLERANCES )	-	80	20 % discount to BIS
8.1(WORKMANSHIP AND FINISH )	-	30	20 % discount to BIS
8.3(WORKMANSHIP AND FINISH )	-	30	20 % discount to BIS
10.1.1(MOISTURE CONTENT)	-	400	20 % discount to BIS
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	600	20 % discount to BIS
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	400	20 % discount to BIS
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	1500	20 % discount to BIS
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	900	20 % discount to BIS
10.1.4(RESISTANCE TO WATER TEST)	-	600	20 % discount to BIS
10.1.5(MYCOLOGICAL TEST )	-	1800	20 % discount to BIS
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	600	20 % discount to BIS
10.1.5.2(MYCOLOGICAL TEST )	-	400	20 % discount to BIS
10.1.6(TENSILE STRENGTH)	-	1000	20 % discount to BIS
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	750	20 % discount to BIS
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	750	20 % discount to BIS
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	1000	20 % discount to BIS
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	1000	20 % discount to BIS
10.1.9(RETENTION OF PRESERVATIVE)	-	1000	20 % discount to BIS
12, 12.1(MARKING)	-	0	20 % discount to BIS
12, 12.2(MARKING)	-	0	20 % discount to BIS

12 Sep, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Hindustaan Testing Solutions LLP

Plot No. 36,Sector 1, HSIIDC IGC Saha, Ambala Cantt, Ambala Cantt, Ambala, Haryana, 133104

9355002828 hindustaantesthouse@gmail.com

Scope List