BIS - LIMS (Laboratory Information Management System)

Hindustaan Testing Solutions LLP, Ambala

Plot No. 36,Sector 1, HSIIDC IGC Saha, Ambala Cantt, Ambala Cantt, Ambala, Haryana, 133104

9355002828 hindustaantesthouse@gmail.com

Scope List

Reset

64 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

BWP

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Plywood)	-	20	20 % discount to BIS
9.2(Workmanship & finish - IS 2202(Pt-1))	-	20	20 % discount to BIS
9.3(Workmanship & finish - IS 2202(Pt-1))	-	20	20 % discount to BIS
11.1(Height - IS 4020 (Pt-2))	-	50	20 % discount to BIS
11.1(Width- IS 4020 (Pt-2))	-	20	20 % discount to BIS
11.1(Thickness - IS 4020 (Pt-2))	-	100	20 % discount to BIS
11.1( Squareness Test - IS 4020 (Pt-2))	-	100	20 % discount to BIS
11.1(Variation in thickness - IS 4020 (Pt-2))	-	40	20 % discount to BIS
11.3(Depth of deviation - IS 4020(Pt-4))	-	750	20 % discount to BIS
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	400	20 % discount to BIS
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	650	20 % discount to BIS
11.4(Depth of indentation - IS 4020(Pt-5))	-	100	20 % discount to BIS
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	650	20 % discount to BIS
11.5(Residual deflection - IS 4020(Pt-6))	-	100	20 % discount to BIS
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	500	20 % discount to BIS
11.6(Residual deflection after removal of load - IS 4020(Pt-7))	-	100	20 % discount to BIS
11.6(Lateral buckling during loading - IS 4020(Pt-7))	-	100	20 % discount to BIS
11.6(Residual lateral buckling - IS 4020(Pt-7))	-	50	20 % discount to BIS
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	500	20 % discount to BIS
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	250	20 % discount to BIS
11.8(Buckling Test - IS 4020(Pt-9))	-	500	20 % discount to BIS
11.8(Initial deflection - IS 4020(Pt-9))	-	150	20 % discount to BIS
11.8(Residual deformation after 15 minutes of unloading - IS 4020(Pt-9))	-	100	20 % discount to BIS
11.9(Slamming Test - IS 4020(Pt-10))	-	750	20 % discount to BIS
11.1(Misuse Test - IS 4020(Pt-11))	-	750	20 % discount to BIS
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	1500	20 % discount to BIS
11.11(Maximum departure from the general planeness - IS 4020(Pt-12))	-	300	20 % discount to BIS
11.11(The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12))	-	300	20 % discount to BIS
11.12(End Immersion Test - IS 4020(Pt-13))	-	1600	20 % discount to BIS
11.13(Knife Test - IS 4020(Pt-14))	-	400	20 % discount to BIS
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	800	20 % discount to BIS
11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16))	-	400	20 % discount to BIS
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	400	20 % discount to BIS

12 Sep, 2028

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

BWP

12600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	50	20 % discount to BIS
6.1(DIMENSIONS)	-	50	20 % discount to BIS
6.2(DIMENSIONS)	-	80	20 % discount to BIS
6.3(DIMENSIONS)	-	80	20 % discount to BIS
6.3(DIMENSIONS)	-	80	20 % discount to BIS
7.1(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
7.2(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
7.3(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
7.5(WORKMANSHIP AND FINISH )	-	15	20 % discount to BIS
9.1.1(MOISTURE CONTENT)	-	400	20 % discount to BIS
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	600	20 % discount to BIS
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	400	20 % discount to BIS
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2100	20 % discount to BIS
9.1.5(Mycological test)	-	1800	20 % discount to BIS
9.1.5 , 9.1.3.1.1(Mycological test)	-	600	20 % discount to BIS
9.1.5 , 9.1.3.1.2(Mycological test)	-	400	20 % discount to BIS
9.1.4(Tensile strength)	-	1000	20 % discount to BIS
9.1.6 (Table 3)(Static bending strength)	-	750	20 % discount to BIS
9.1.6 (Table 3)(Static bending strength)	-	750	20 % discount to BIS
9.1.7 (Table 4)(Wet bending strength)	-	1000	20 % discount to BIS
9.1.7 (Table 4)(Wet bending strength)	-	1000	20 % discount to BIS
9.1.8(Retention of preservative)	-	1000	20 % discount to BIS
11.1(MARKING)	-	0	NA
11.2(MARKING)	-	0	NA
9.1.3 , 9.1.3.1.2(Water resistance test)	-	400	20 % discount to BIS

12 Sep, 2028

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

MR-BWP

6850 View breakup
For MR-Rs.6150/- For BWP-Rs.6850

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	400	(For MR Grade-6150 & BWP grade-6850) 20 % discount to BIS GSTIN extra as per govt rule
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	400	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Length - 8.1.4)	-	50	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Width - 8.1.4)	-	50	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Thickness - Annexure E)	-	80	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	20 % discount to BIS GSTIN extra as per govt rule
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	20 % discount to BIS
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	20	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	300	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	100	20 % discount to BIS GSTIN extra as per govt rule
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	150	20 % discount to BIS GSTIN extra as per govt rule
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	3300	20 % discount to BIS GSTIN extra as per govt rule
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	800	20 % discount to BIS GSTIN extra as per govt rule
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1800	20 % discount to BIS GSTIN extra as per govt rule
9.2.3(Adhesion of Plies - Annexure H)	-	400	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	100	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	150	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	100	20 % discount to BIS GSTIN extra as per govt rule
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	150	20 % discount to BIS GSTIN extra as per govt rule
9.2.6(Spot test - Annexure L)	-	400	20 % discount to BIS GSTIN extra as per govt rule
9.2.6 (mechanical)(Spot test - Annexure L)	-	400	20 % discount to BIS GSTIN extra as per govt rule
cl. 11(marking)	-	0	20 % discount to BIS GSTIN extra as per govt rule
cl. 11.1(marking - BIS certification marking)	-	0	20 % discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

IS 303 (1989)

Plywood for General Purposes -

MR-BWR

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grade - For BWR grade)	-	0	For MR Grade-4900 & BWR Grade-5400 20% discount to BIS GSTIN extra as per govt rule
4(Grade - For MR grade)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For AA Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For AB Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For BB Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	300	20% discount to BIS GSTIN extra as per govt rule
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	20% discount to BIS GSTIN extra as per govt rule
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Length - Cl. 8)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Width - Cl. 8)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.3(Moisture Content - Part 1 of IS 1734)	-	400	20% discount to BIS GSTIN extra as per govt rule
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	3200	20% discount to BIS GSTIN extra as per govt rule
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	800	20% discount to BIS GSTIN extra as per govt rule
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1900	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
cl. 13.1(marking)	-	0	20% discount to BIS GSTIN extra as per govt rule
cl. 13.2(marking)	-	0	20% discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Hindustaan Testing Solutions LLP, Ambala

Plot No. 36,Sector 1, HSIIDC IGC Saha, Ambala Cantt, Ambala Cantt, Ambala, Haryana, 133104

9355002828 hindustaantesthouse@gmail.com

Scope List