BIS - LIMS (Laboratory Information Management System)

ATCC TEST LABS

KHASRA NO. 45/6, SITUATED IN THE AREA, VILLAGE PRAHLADPUR BANGER,, North West Delhi, Delhi, 110042, Delhi, North West, Delhi, 110042

9891606632 info@atncc.in

Scope List

Reset

63 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	2000	-
29.0(Creepage Distances and Clearances)	-	1000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	1000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
24.0(Components)	-	500	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	3000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	2000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	1500	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	2000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	0	-
6.0(Marking and Instructions)	-	500	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	2000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2500	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	2000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	500	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	500	-
16(Endurance Test)	-	3000	-
17(Test for Harmonic Distortion)	-	1000	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components. Electronic Type regulators (Cl.10.7) size upto 1500 mm.

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
6(Classification )	-	0	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	1000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	1000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1500	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	3000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	-

15 Jun, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

ATCC TEST LABS

KHASRA NO. 45/6, SITUATED IN THE AREA, VILLAGE PRAHLADPUR BANGER,, North West Delhi, Delhi, 110042, Delhi, North West, Delhi, 110042

9891606632 info@atncc.in

Scope List