BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3061

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

9189614

IS 73 (2013)

Paving bitumen - Specification (Fourth Revision)

Paving bitumen

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	5460	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	3030	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	3030	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	3030	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	3030	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	4240	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	3030	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	5460	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	3030	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	3030	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	3030	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	4240	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	5460	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	3030	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	4240	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	3030	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	4240	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	4240	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	3030	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	4240	-

-
Exclusion: 6.1 (Description) 6.2 Table 1 (Flash point (Cleveland open cup), All Grades) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)

3062

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

9189614

IS 11489 (1985)

Specification for heavy petroleum stock (Hps)

Low Sulfur Heavy Stock (LSHS)

10980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-i)(Pour Point,°C,Max)	-	1900	-
3.2-Table 1-ii)(Flash point, PMCC, °C, Max)	-	1900	-
3.2-Table 1-iii)( Kinematic viscosity, mm2/s at 100°C, Max)	-	2270	-
3.2-Table 1-iv)(Relative Density,at 15°/15°C)	-	1130	-
3.2-Table 1-ix)(Sulphur Total percent by mass,Max)	-	2650	-
3.2-Table 1-x)(Water Content percent by volume, Max)	-	1130	-

-
Exclusion: 3.1 (General) 3.2-Table 1-v) (Gross Calorific Value) 3.2-Table 1-vi) (Acidity Inorganic) 3.2-Table 1-vii) (Ash Percent by mass,Max) 3.2-Table 1-viii) (Sediment percent by mass,Max) 4.1 (Packing) 4.2 (Marking)

3063

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

9189614

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

Furnace Oil & variants

9080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1130	-
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	-
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	-
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	-
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	-

-
Exclusion: 4.1 (General) 4.2 (Pour Point) 4.3 (Asphaltene Content) 4.4 (TOTAL SEDIMENT) 4.5 (Spot Test) 4.6-Table 1-i) (Acidity, inorganic) 4.6-Table 1-ii) (Ash, percent by mass, Max) 4.6-Table 1-iii) (Carbon residue, mass percent, Max) 4.6-Table 1-iv) (Gross, calorific value) 4.6-Table 1-viii) (Sediment, percent by mass, Max) 5.1 (Packing) 5.2 (Marking)

3064

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

9189614

IS 15770 (2021)

Heating Oil(LDO) - Specification

Light Diesel Oil (LDO)

10980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-iv)(Pour Point, °C, Max a) Winter [November toFebruary (both months inclusive)], b) Summer (rest of the months in a year))	-	1900	-
3.2-Table 1-vi)(Flash point, Pensky Martens ,°C, Min)	-	1900	-
3.2-Table 1-vii)(Kinematic viscosity at 40 °C, mm2 /sec)	-	2270	-
3.2-Table 1-ix)(Density at 15 °C, Kg/m3)	-	1130	-
3.2-Table 1-x)(Water content, percent by volume, Max)	-	1130	-
3.2-Table 1-xi)(Total sulphur, percent by mass)	-	2650	-

-
Exclusion: 3.1 (General) 3.2-Table 1-i) (Acid number, mg KOH/gm, Max) 3.2-Table 1-ii) (Ash, percent by mass, Max) 3.2-Table 1-iii) (Carbon residue, on whole samples, percent by mass, Max) 3.2-Table 1-v) (Copper strip corrosion for 3 h at 100 °C) 3.2-Table 1-viii) (Sediment, percent by mass, Max) 5.1 (Packing) 5.2 (Marking)

3065

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

9189614

IS 15464 (2022)

ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision

Anhydrous Ethanol

11020 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-xv)(Sulfur content, mg/kg, Max.)	-	4710	-
4.4-Table 1-i)(Appearance)	-	200	-
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.)	-	960	-
4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant))	-	1340	-
4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max)	-	1900	-
4.4-Table 1-ix)(Alkalinity, mg/kg, Max.)	-	400	-
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max)	-	1130	-
4.4-Table 1-xix)(Miscibility with water)	-	380	-

-
Exclusion: 4.1 (Description) 4.2 (Denaturant) 4.3 (Acidity) 4.4-Table 1 iv (Methanol) 4.4-Table 1-iv) (Ethanol, percent, v/v, Min1). (excluding denaturant)) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-vii) (Residue on evaporation, percent by mass, Max.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xvii) (Water content, percent v/v, Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.1 (Packing) 5.2 (Marking) 7.1 (Tests shall be conducted)

3066

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

11150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(TOTAL SEDIMENT)	-	1740	-
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	-
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1130	-
4.6-Table 1-ii)(Ash, percent by mass, Max)	-	2070	-
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	-
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	-
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	-
4.6-Table 1-viii)(Sediment, percent by mass, Max)	-	1740	-

10 Nov, 2028

-
Exclusion: 4.1 (General) 4.2 (Pour Point) 4.3 (Asphaltene Content) 4.5 (Spot Test) 4.6-Table 1-i) (Acidity, inorganic) 4.6-Table 1-iii) (Carbon residue, mass percent, Max) 4.6-Table 1-iv) (Gross, calorific value) 5.1 (Packing) 5.2 (Marking)

3067

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 15770 (2021)

Heating Oil(LDO) - Specification

10980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-vi)(Flash point, Pensky Martens ,°C, Min)	-	1900	-
3.2-Table 1-vii)(Kinematic viscosity at 40 °C, mm2 /sec)	-	2270	-
3.2-Table 1-xi)(Total sulphur, percent by mass)	-	2650	-
3.2-Table 1-x)(Water content, percent by volume, Max)	-	1130	-
3.2-Table 1-iv)(Pour Point, °C, Max a) Winter [November toFebruary (both months inclusive)], b) Summer (rest of the months in a year))	-	1900	-
3.2-Table 1-ix)(Density at 15 °C, Kg/m3)	-	1130	-

10 Nov, 2028

-
Exclusion;: 3.1 (General) 3.2-Table 1-i) (Acid number, mg KOH/gm, Max) 3.2-Table 1-ii) (Ash, percent by mass, Max) 3.2-Table 1-iii) (Carbon residue, on whole samples, percent by mass, Max) 3.2-Table 1-v) (Copper strip corrosion for 3 h at 100 °C) 3.2-Table 1-viii) (Sediment, percent by mass, Max) 5.1 (Packing) 5.2 (Marking)

3068

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 1459 (2018)

Kerosene - Specification (Fourth Revision)

13050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-vi)(Density at 15°C, kg/m3)	-	1130	-
4.2-Table 1-vii)(Distillation a)Percent recovered below200°C, percent (v/v), Min b)Final boiling point, °C, Max )	-	2650	-
4.2-Table 1-viii)(Flash point ( Abel), °C, Min)	-	1900	-
4.2-Table 1-ix)(Smoke Point4), mm, Min)	-	1130	-
4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max)	-	4710	-
4.2-Table 1-i)(Appearance)	-	200	-
4.2-Table 1-iv)(Colour a)Saybolt (in cas of undyedKerosene)3), Min b)Visual (in case of dyed Kerosene))	-	200	-
4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C)	-	1130	-

10 Nov, 2028

-
Exclusion: 4.2-Table 1-ii) (Acidity, inorganic) 4.2-Table 1-iii) (Burning quality2) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney) 5.1 (Packing) 5.2 (Marking)

3069

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

18360 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 b) Winter)	-	1900	-
4.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 a) Summer)	-	1900	-
4.4(Copper corrosion - IS 1448 P:15 / ISO 2160)	-	1130	-
4.4(Density at 15 oC - IS 1448 P:16/ ISO 3675/ ISO 12185/ ASTM D4052)	-	1130	-
4.4(Flash point (PMCC) - IS 1448 P:21 )	-	1900	-
4.4(Kinematic viscosity at 40°C - IS 1448 P:25/ ISO3104)	-	2270	-
4.4(Sulphur - ISO 20846 / ASTM D5453)	-	4710	-
4.4(Water content - IS 1448 P:40 / ISO 3733/ ISO 12937)	-	4160	-
4.4(Acid value - IS 1448 P:17)	-	960	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-
4.4-Table 1-i)(Appearance, visual)	-	200	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	-
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	960	-
4.4-Table 1-ii)(Colour, visual)	-	200	-

10 Nov, 2028

-
Exclusion: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

3070

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 15464 (2022)

ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision

10460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.)	-	400	-
4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max)	-	1900	-
4.4-Table 1-ix)(Alkalinity, mg/kg, Max.)	-	400	-
4.4-Table 1-i)(Appearance)	-	200	-
4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant))	-	1340	-
4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant))	-	1340	-
4.4-Table 1-xix)(Miscibility with water)	-	380	-
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max)	-	1130	-
4.4-Table 1-xv)(Sulfur content, mg/kg, Max.)	-	4710	-

10 Nov, 2028

-
Exclusion: 4.1 (Description) 4.2 (Denaturant) 4.3 (Acidity) 4.4-Table 1 iv (Methanol) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-vii) (Residue on evaporation, percent by mass, Max.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xvii) (Water content, percent v/v, Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.1 (Packing) 5.2 (Marking) 7.1 (Tests shall be conducted)

3071

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 1604 (2022)

Aviation gasoline - Specification (fifth revision)

12540 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2-Table 1-i(Appearance)	-	200	-
4.1.2-Table 1-iv(Copper strip corrosion for 2 h at 100°C)	-	1130	-
4.1.2-Table 1-v(Density at 15°C, kg/m3)	-	1130	-
4.1.2-Table 1-vi(Distillation)	-	2650	-
4.1.2-Table 1-viii(Existent gum, mg/100 ml, Max)	-	2070	-
4.1.2-Table 1-xiii(Specific energy MJ/kg, Min)	-	2480	-
4.1.2-Table 1-xii(Reid vapour pressure at 38°C, kPa)	-	1900	-
4.1.2-Table 1-xiv(Total sulphur percent m/m, Max)	-	4710	-
4.1.2-Table 1-xvi(Water reaction: Volume change, ml, Max)	-	780	-
4.1.2-Table 1-ii(Colour, visual)	-	200	-

10 Nov, 2028

-
Exclusion: 4.1 (General) 4.2 (Composition) 4.2.2-Table 1-vi) (Freezing point, °C, Max) 4.2.2-Table 1-vii) (Knock rating: a) Lean mixture,motor method,octane number, Min b) Rich mixture, octane number, Min c) Rich mixture, performance number, Min) 4.2.2-Table 1-viii) (Oxidation stability, 16 h: a) Potential gum, mg/100 ml, Max b) Potential gum, mg/100 ml, Max) 4.2.2-Table 1-xii) (Tetraethyl lead, g Pb/l at 15°C, Max) 4.2.2-Table 1-xiv) (Electrical conductivity, pS/m) 4.2.3 (Static Dissipater Additive (SDA)) 4.2.4 (Dyes) 4.3 (Materials) 4.4 (Requirements) 6.1 (Packing) 6.2 (Marking) 4.2.5 (Colour by lovibond)

3072

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

19660 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	-
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3770	-
Cl-3.1.4 , 3.2, Table-1 (xvi) (a)(Cold Filter Plugging Point (CFPP)3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xvi) (b)(Cold Filter Plugging Point (CFPP)3, °C, Max: Summer)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	-
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	-
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-3.1.4 , 3.2, Table-1 (xv)(Water content, mg/kg, Max)	-	4160	-
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	-

10 Nov, 2028

-
Exclusion: Cl-3.1 (General- Requirements) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-3.2 (Composition) Cl-5.2 (Marking)

3073

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 1571 (2018)

Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision)

33200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)("Aromatics, percent by volMumaex, or Total Aromatics, percent by volume, Max")	-	2650	-
Cl-3.2.2, 3.2.6, Table-1 (B)(Colour)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (a)(Copper strip corrosion for 2 h at 100°C)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (c)(Density at 15°C,kg/m3)	-	1130	-
Cl-3.2.2, 3.2.6, Table- 1, (iii) (a), 5)(Distillation:- Final boiling point,°C, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 1)(Distillation:- Initial boiling point, °)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 7)(Distillation:- Loss, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 6)(Distillation:- Residue, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (x)(Conductivity: Electrical conductivity, pS/m19))	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (viii)(Contaminants: Existent gum, mg/100 ml, Max)	-	2070	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (b)(Flash point ( Abel ), °C, Min)	-	1900	-
Cl-3.2.2, 3.2.6, Table- 1, (iv) (a)(Fluidity:- Freezing point, °C, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (iv) (b)(Fluidity:- Kinematic viscosity at minus 20°C, mm2/s, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (v) (b) 2)(Naphthalenes, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)("Silver stripcorrosion12) classification, for 4 h at 50°C, Max")	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (v) (b)(Smoke point, mm, Min or)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (v) (a)(Specific energy10) MJ/kg, Min)	-	2480	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (a)(Total acidi,t y mg KOHM/ga, x)	-	1530	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1 (a)(Visual appearance)	-	200	-
Cl-3.2.2, 3.2.6, Table-1, (ix) a)(Water reaction: Interface rating16), Max)	-	780	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)(Aromatics, percent by vol (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)(Silver stripcorrosion12) classification, for 4 h at 50°C, (Defense requirements))	-	1340	-
Amendment No.5 Table 3 Clause G-2.5 iii(Aromatics)	-	2650	-
Amendment No.5 Table 3 Clause G-2.5 ii(Fluidity-Freezing point)	-	2270	-

10 Nov, 2028

-
Exclusion: Amendment No.5 Table 3 Clause G-2.5 i (Annex B VTR) Amendment No.5 Table 3 Clause G-2.5 i (Annex C ITR or Annex D ETR, average over an area of 2.5 mm2) Amendment No.5 Table 3 Clause G-2.5 i (Pressure differential) Amendment No.5 Table 3 Clause G-2.5 i (Test temperature for 2.5 h) Amendment No.5 Table 3 Clause G-2.5 i (Thermal stability) Amendment No.5 Table 3 Clause G-2.5 i (Tube Rating) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Viscosity at - 40 ℃) Amendment No.5 Table 3 Clause G-2.5 iv (Volatility- Distillation-T50 to T10, ℃) Amendment No.5 Table 3 Clause G-2.5 v (Lubricity) Amendment No.5 Table 3 Clause G-2.5 vi (Unconverted fatty acid esters and fatty acids) Cl-3.1 (General-Material) Cl-3.2 (Composition) Cl-3.2.1 (Antioxidants) Cl-3.2.2 (Metal Deactivator Additive (MDA)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm (defense requirements)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm, Max) Cl-3.2.2, 3.2.6, Table-1 (c) (Particulate contamination, at point of 1.02) manufacture, mg/l, Max) Cl-3.2.2, 3.2.6, Table-1 (d) 1) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥ 4 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 2) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥6 μm(c) Cl-3.2.2, 3.2.6, Table-1 (d) 3) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥14 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 4) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥21 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 5) (Particulate, at point of manufacture, cumulative channel particle counts:-≥25 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 6) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥30 μm©) Cl-3.2.2, 3.2.6, Table-1, (ii) (e) (Doctor Test) Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 1) ("Refining components, at the point of manufacture8) :- Non Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 2) ("Refining components, at the point of manufacture8) :- Mildly Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 3) ("Refining components, at the point of manufacture8) :- Severely Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 4) ("Refining components, at the point of manufacture8) :- Synthetic Components, percenvt/ v") Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 2) (Distillation:- 10 percent recovery °Cv/,v , Max) Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 4) (Distillation:- 90 percent recovery °C, v/v) Cl-3.2.2, 3.2.6, Table-1, (ix) b), 1) ("Micro-separometer rating18) at the point of manufacture: - MSEP without SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 2) ("Micro-separometer rating18) at the point of manufacture: MSEP with SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (vii) (a) (Filter pressure differential, mm Hg, Max) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 1) (Tube rating, visual (VTR)) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 2) (ITR or ETR, average over area of 2.5 mm2 in nm) Cl-3.2.2, 3.2.6, Table-1, (xii) (Identified Incidental Materials :- Fatty Acid Methyl Ester, mg/kg, Max) Cl-3.2.3 (Static Dissipater Additive (SDA)) Cl-3.2.4 (Lubricity Improver Additive (LIA)) Cl-3.2.5 (Fuel System Icing Inhibitor (FSII)) Cl-3.2.7 (Leak Detection Additive) Cl-5.2 (Marking)

3074

Indian Oil Corporation Limited (IOCL), Jalandhar Terminal Laboratory

9190014

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	690	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	-

10 Nov, 2028

-
Exclusion: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) (percent evaporated at 70°C (E 70°C), percent v/v: E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Ethanol content, percent by volume: a):- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-5.2 (Markeing)

3075

Perfect International Testing Lab

8187826

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	N/A
8(Protection against access to live parts)	-	500	N/A
10(Power input and current)	-	1000	N/A
11(Heating)	-	1000	N/A
13.1 &13.2(Leakage current test)	-	500	N/A
13.1 &13.3(Electric strength test)	-	500	N/A
14(Transient overvoltages)	-	1000	N/A
15(Moisture resistance)	-	500	N/A
15.3(Moisture resistance)	-	500	N/A
15.101(Moisture resistance)	-	500	N/A
16.1 &16.2(Leakage current test)	-	500	N/A
16.1 & 16.3(Electric strength test)	-	500	N/A
17(Overload protection of transformers and associated circuits)	-	1000	N/A
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	500	N/A
19.101 to to 19.102(Abnormal operation)	-	500	N/A
20(Stability and mechanical hazards)	-	500	N/A
21(Mechanical strength)	-	500	N/A
22(Construction)	-	1000	N/A
22.101(Construction)	-	500	N/A
23(Internal wiring)	-	500	N/A
24(Components)	-	500	N/A
25("Supply connection and external flexible cords")	-	500	N/A
26("Terminals for external conductors")	-	1000	N/A
27(Provision for earthing)	-	1000	N/A
28(Screws and connections)	-	500	N/A
29("Clearances, creepage distances and solid insulation")	-	500	N/A
30(Resistance to heat and fire)	-	1000	N/A
31(Resistance to rusting)	-	500	N/A
32("Radiation, toxicity and similar hazards")	-	0	N/A
Cl.19.11.4.1(Electrostatic discharges)	-	1000	N/A
Cl.19.11.4.2(Radiated fields)	-	0	N/A
Cl.19.11.4.3(Fast transient bursts)	-	0	N/A
Cl.19.11.4.4(Voltage surges)	-	1000	N/A
Cl.19.11.4.5(Injected currents)	-	0	N/A
Cl.19.11.4.6(Class 3 voltage dips and interruptions)	-	0	N/A
Cl.19.11.4.7(mains signals)	-	0	N/A
7(Marking and instructions)	-	-	-
8(Protection against access to live parts)	-	-	-
10(Power input and current)	-	-	-
11(Heating)	-	-	-
13.1 &13.2(Leakage current test)	-	-	-
13.1 &13.3(Electric strength test)	-	-	-
14(Transient overvoltages)	-	-	-
15(Moisture resistance)	-	-	-
15.3(Moisture resistance)	-	-	-
15.101(Moisture resistance)	-	-	-
16.1 &16.2(Leakage current test)	-	-	-
16.1 & 16.3(Electric strength test)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	-	-
19.101 to to 19.102(Abnormal operation)	-	-	-
20(Stability and mechanical hazards)	-	-	-
21(Mechanical strength)	-	-	-
22(Construction)	-	-	-
22.101(Construction)	-	-	-
23(Internal wiring)	-	-	-
24(Components)	-	-	-
25("Supply connection and external flexible cords")	-	-	-
26("Terminals for external conductors")	-	-	-
27(Provision for earthing)	-	-	-
28(Screws and connections)	-	-	-
29("Clearances, creepage distances and solid insulation")	-	-	-
30(Resistance to heat and fire)	-	-	-
31(Resistance to rusting)	-	-	-
32("Radiation, toxicity and similar hazards")	-	-	-
Cl.19.11.4.1(Electrostatic discharges)	-	-	-
Cl.19.11.4.2(Radiated fields)	-	-	-
Cl.19.11.4.3(Fast transient bursts)	-	-	-
Cl.19.11.4.4(Voltage surges)	-	-	-
Cl.19.11.4.5(Injected currents)	-	-	-
Cl.19.11.4.6(Class 3 voltage dips and interruptions)	-	-	-
Cl.19.11.4.7(mains signals)	-	-	-

02 Sep, 2028

-
Included w.e.f. 15.10.2025 Exclusion: "24 (Components) 32 (""Radiation, toxicity and similar hazards"") Cl.19.11.4.2 (Radiated fields) Cl.19.11.4.3 (Fast transient bursts) Cl.19.11.4.5 (Injected currents) Cl.19.11.4.6 (Class 3 voltage dips and interruptions) Cl.19.11.4.7 (mains signals) "

3076

Bathinda Terminal Laboratory (IOCL)

9192314

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

17780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	-
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3770	-
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	-
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	-
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-3.1.4 , 3.2, Table-1 (xvi) (a)(Cold Filter Plugging Point (CFPP)3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	-

03 Dec, 2028

-
Cl-3.1 (General- Requirements) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-3.2 (Composition) Cl-5.2 (Marking)

3077

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 Table 1(Carbon)	-	2000	-
Cl. 5.1 Table 1(Silicon)	-	2000	-
Cl. 5.1 Table 1(Manganese)	-	2000	-
Cl. 5.1 Table 1(Phosphorous)	-	2000	-
Cl. 5.1 Table 1(Sulphur)	-	2000	-
Cl. 6.1(Workmanship)	-	1000	-
Cl. 6.2(Fin Height)	-	0	-
Cl. 6.3(Straightness)	-	0	-
Cl. 8.1(Tensile Strength)	-	2000	-
Cl. 8.1(Yield Strength)	-	2000	-
Cl. 8.1(Elongation)	-	2000	-
Cl. 8.2(Drift Expansion Test- IS 2335)	-	2000	-
Cl. 8.3(Flattening Test-IS 2338)	-	2000	-
Cl. 9(Diameter)	-	1499.99	-
Cl. 9(Thickness)	-	0	-
Cl. 3.2.1, Table 4(Yield Stress)	-	0	-
Cl. 3.2.1, Table 4(UTS)	-	0	-
Cl. 3.2.1, Table 4(Elongation)	-	0	-
Cl. 3.2.2, Table 2(Drift Expansion Test- IS 2335)	-	0	-
Cl. 3.2.3, Table 3(Flattening Test-IS 2338)	-	0	-
Cl. 4.2.1(Diameter)	-	0	-
Cl. 4.2.2(Thickness)	-	0	-
Cl. 4.2.3(Length)	-	0	-
Cl. 3.1(Carbon)	-	0	-
Cl. 3.1(Silicon)	-	0	-
Cl. 3.1(Manganese)	-	0	-
Cl. 3.1(Phosphorous)	-	0	-
Cl. 3.1(Sulphur)	-	0	-
Cl. 4.2.1, Table 7(Yield Stress)	-	0	-
Cl. 4.2.1, Table 7(UTS)	-	0	-
Cl. 4.2.1, Table 7(Crushing)	-	0	-
Cl. 4.2.2, Table 8(Drift Expansion Test- IS 2335)	-	0	-
Cl. 4.2.3, Table 9(Flattening Test-IS 2338)	-	0	-
Cl. 5.2.1, Table 10(Diameter)	-	0	-
Cl. 5.2.2(Mean Thickness)	-	0	-
Cl. 5.2.3, Table 6(Length)	-	0	-
CL 5.1 TABLE 1(Carbon- IS 228(Part 1))	-	0	-
CL 5.1 TABLE 1(Sulphur- IS 228(Part 9))	-	0	-
CL 5.1 TABLE 1(Phosphorous- IS 228(Part 3))	-	0	-
CL 5.1 TABLE 1(Manganese- IS 228(Part 2))	-	0	-
CL 5.1 TABLE 1(Silicon- IS 228(Part 2))	-	0	-
2.1(General requirements)	-	0	-
3.2.1(Tensile properties)	-	0	-
3.2.2(Drift expansion test)	-	0	-
3.2.3(Flattening test)	-	0	-
4.1(Dimensions of tubes)	-	0	-
4.2(4.2)	-	0	-
2.1(General requirements)	-	0	-
5.1, table 1(C Si Mn P S)	-	0	-
4.2.1(Tensile properties)	-	0	-
4.2.2(Drift expansion test)	-	0	-
4.2.3(Flattening test)	-	0	-
5.1(Dimenion of tube)	-	0	-
5.2(Tolerances)	-	0	-
3.1(General requirements)	-	0	-
5.1, table 1(C Si Mn P S)	-	0	-
6(Workmanship)	-	0	-
7(Inspection)	-	0	-
8.1(Tensile test)	-	0	-
8.2(Drift expansion test)	-	0	-
8.3(Flattening test)	-	0	-
10(Selection of tubes for testing)	-	0	-
11(Test certificate & Marking)	-	0	-

-
Included w.e.f. 12.11.2025

3078

INDIAN OIL CORPORATION LTD. (IOCL) (MD) LEH DEPOT LABORATORY

9195414

IS 17586 (2021)

E12 and E15 Fuel - Admixture of Anhydrous Ethanol and Motor Gasoline - For Positive Ignition Engine Powered Vehicles - Specification

MG/EBMG UPTO 15%-1 LTR

11570 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1-Table 1-i)(Appearance)	-	200	Testing charges as per FY 2025-26, excluding GST.
4.1.1-Table 1-ii)(Colour)	-	200	Testing charges as per FY 2025-26, excluding GST.
4.1.1-Table 1-vii)(Gum content (Solvent washed), g/m3 , Max)	-	2070	Testing charges as per FY 2025-26, excluding GST.
4.1.1-Table 1-viii)(Total Sulphur, mg/kg, Max)	-	2650	-
4.1.1-Table 1-xiii)(Copper strip corrosion (3 h at 50 °C), Max)	-	1980	Testing charges as per FY 2025-26, excluding GST.
4.1.1-Table 1-xx)(Ethanol content6), percent, v/v, Max)	-	690	Testing charges as per FY 2025-26, excluding GST.
4.1.1-Table 1-iii)(Density at 15°C, kg/m3)	-	1130	Testing charges as per FY 2025-26, excluding GST.
4.1.1-Table 1-iv)(Distillation a) percent evaporated at 70°C(E70 °C), percent v/v b) percent evaporated at 100°C (E100 °C), percent v/v c) percent evaporated at 150°C (E150 °C ), percent v/v, Min d) Final Boiling Point, °C, Max e) Residue, percent by volume, Max )	-	2650	Testing charges as per FY 2025-26, excluding GST.

07 Jan, 2029

-
4.1.1-Table 1-iv) (Distillation a) percent evaporated at 70°C(E70 °C), percent v/v b) percent evaporated at 100°C (E100 °C), percent v/v c) percent evaporated at 150°C (E150 °C ), percent v/v, Min d) Final Boiling Point, °C, Max e) Residue, percent by volume, Max ) 4.1.1-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.1.1-Table 1-v) (Research Octane Number (RON)11), Min) 4.1.1-Table 1-vi) (Motor Octane Number (MON) 11), Min) 4.1.1-Table 1-x) (Reid Vapour pressure at 37.8°C, kPa, Max) 4.1.1-Table 1-xi) (Vapour Lock Index (VLI), Max a) Summer2) b) Other Months) 4.1.1-Table 1-xii) (Benzene content, percent by volume, Max) 4.1.1-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max: a) other months b) Winter3)) 4.1.1-Table 1-xix) (Oxygen content, percent by mass, Max) 4.1.1-Table 1-xix) (Oxygen content, percent by mass, Max) 4.1.1-Table 1-xv) (Engine intake system cleanliness) 4.1.1-Table 1-xv) (Engine intake system cleanliness) 4.1.1-Table 1-xvi) (Olefin content, percent by volume, Max) 4.1.1-Table 1-xvii) (Oxidation stability, minutes, Min) 4.1.1-Table 1-xvii) (Oxidation stability, minutes, Min) 4.1.1-Table 1-xviii) (Aromatic content5), percent by volume, Max) 4.1.1-Table 1-xx) (Ethanol content6), percent, v/v, Max) 4.1.1-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates) 4.1.1-Table 1-xxii) (Motor Gasoline Content, percent, v/v) 4.4 (Organic Oxygenates) 4.5 (Phosphorous) 6.1 (Packing) 6.2 (Marking)

3079

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	250	-
Cl 8.3.1(Adhesion )	-	1000	-
Cl 8.3.2(Impact Resistance)	-	1500	-
Cl 8.4(Load Resistance)	-	1500	-
Cl 8.5(Scratch Resistance)	-	1500	-
Cl 8.7(Dry Film Thickness)	-	2000	-
Cl 9.1(Workmanship)	-	0	-
Cl 10.1(Corrosion Test)	-	3500	-
Cl 10.2(Humidity Test)	-	3000	-
Cl 11(Length, Width & Thickness)	-	1500	-
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1000	-
Cl 12(Weight)	-	500	-
Cl 7(Workmanship)	-	0	-
Cl 8.3.1(Adhesion )	-	0	-
Cl 8.3.2(Impact Resistance)	-	0	-
Cl 8.4(Load Resistance)	-	0	-
Cl 8.5(Scratch Resistance)	-	0	-
Cl 8.7(Dry Film Thickness)	-	0	-
Cl 9.1(Workmanship)	-	0	-
Cl 10.1(Corrosion Test)	-	0	-
Cl 10.2(Humidity Test)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 13(Weight)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8.3.1(Adhesion )	-	0	-
Cl 8.3.2(Impact Resistance)	-	0	-
Cl 8.4(Load Resistance)	-	0	-
Cl 8.5(Scratch Resistance)	-	0	-
Cl 8.7(Dry Film Thickness)	-	0	-
Cl 9.1(Workmanship)	-	0	-
Cl 10.1(Corrosion Test)	-	0	-
Cl 10.2(Humidity Test)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	0	-
Cl 12(Weight)	-	0	-
8.6(Solvent Resistance test)	-	2000	-
9.2(colour)	-	500	-
9.3(Gloss (60 Deg))	-	500	-
4, 5(CARBON)	-	500	-
4, 5(SULPHUR)	-	500	-
4, 5(PHOSPHURS)	-	500	-
4, 5(MANGANESE)	-	500	-
4, 5(NITROGEN)	-	500	-
4, 5(SILICON)	-	500	-
4, 5(ALUMINIUM)	-	500	-
Cl 12(Weight)	-	0	-
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 10.2(Humidity Test)	-	0	-
Cl 10.1(Corrosion Test)	-	0	-
Cl 9.1(Workmanship)	-	0	-
Cl 8.7(Dry Film Thickness)	-	0	-
Cl 8.5(Scratch Resistance)	-	0	-
Cl 8.4(Load Resistance)	-	0	-
Cl 8.3.2(Impact Resistance)	-	0	-
Cl 8.3.1(Adhesion )	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8.3.1(Adhesion)	-	0	-
Cl 8.3.2(Impact Resistance)	-	0	-
Cl 8.4(Load Resistance)	-	0	-
Cl 8.5(Scratch Resistance)	-	0	-
Cl 8.7(Dry Film Thickness)	-	0	-
Cl 9.1(Workmanship)	-	0	-
Cl 10.1(Corrosion Test)	-	0	-
Cl 10.2(Humidity Test)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	0	-
Cl 12(Weight)	-	0	-
13(IS 15965)	-	0	-
12.1(IS 15965)	-	0	-
12.2(IS/ISO 16163)	-	0	-
12.3(IS 15965)	-	0	-
11.0(IS/ISO 16163)	-	0	-
11.0(IS/ISO 16163)	-	0	-
10.1(IS 9844)	-	0	-
10.1(IS 9844)	-	0	-
10.1(IS 9844)	-	0	-
10.1(IS 9844)	-	0	-
10.1(IS 9844)	-	0	-
10.1(IS 9844)	-	0	-
10.2(IS 101 Part 6 Sec 1)	-	0	-
10.2(IS 101 Part 6 Sec 1)	-	0	-
10.2(IS 101 Part 6 Sec 1)	-	0	-
10.2(IS 101 Part 6 Sec 1)	-	500	-
9.1(IS 15965)	-	0	-
8.3.1(IS 15965)	-	0	-
8.3.2(IS 15965)	-	0	-
8.3.2(IS 15965)	-	0	-
8.4(IS 101 Part 5 Sec 1)	-	0	-
8.5(IS 101 Part 5 Sec 2)	-	0	-
7 & 7.3(ISO 2808)	-	0	-
7 & 7.3(ISO 2808)	-	0	-
7 & 7.4(ISO 2808)	-	0	-
13(Mass)	-	500	-
12.1(Chamber)	-	500	-
12.2(Deviation from Squareness (Out of square))	-	0	-
12.3(Deviation from flatness (Steepness))	-	500	-
11.0(Length)	-	0	-
11.0(Width)	-	0	-
11.0(Thickness)	-	500	-
10.1(Corrosion resistance ( Rating for Failure at scribed and panel edge))	-	0	-
10.1(Corrosion resistance (Under cut at scribed Lines, Rating for failure at scribe & Panel edge))	-	0	-
10.1(Corrosion resistance (Corrosion of base metal, Degree of deterioration for the metal substrate))	-	0	-
10.1(Corrosion resistance (Rating for density of Blistering))	-	0	-
10.1(Corrosion resistance (Rating for size of Blisters))	-	0	-
10.2(Humidity resistance ( Rating for Failure at scribed and panel edge))	-	0	-
10.2(Humidity resistance (Under cut at scribed Lines, Rating for failure at scribe & Panel edge))	-	0	-
10.2(Humidity resistance (Rating for density of Blistering))	-	0	-
10.2(Humdity resistance (Rating for size of Blisters))	-	0	-
9.1(Appearance (General))	-	500	-
8.3.1(T bend Adhesion Test)	-	500	-
8.3.2(Reverse Impact Resistance test)	-	1000	-
8.4(Pencile hardness test)	-	0	-
8.5(Scratch Hardness Test)	-	0	-
7 & 7.3(Coating (Top Side))	-	250	-
7 & 7.3(Coating (Bottom Side))	-	250	-
7 & 7.4(Coating (Primer Coating))	-	500	-
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	0	-

08 Feb, 2027

-
Included w.e.f. 17.02.2026

3080

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

PE 80, PE100 DN 16 to DN 315

402000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	0	-
4.3(Nominal Diameter)	-	0	-
4.4(Colour)	-	0	-
5.1(Polyethylene compound)	-	6100	Density: 700 MFI: 1100 OIT: 2200 Volatile: 700 Water Content: 700 Pigment Dispersion:700
5.7(PE Compound Quality Evaluation)	-	400000	Long Term hydro for 20°C for 10000 hrs : 400000/-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	Chemicals charges will be extra 4000 + 1000/-
5.6(Resistance to Weathering)	-	36000	conditioning charges: 36000/- Elongation: 1300 + 500 Hydro 80deg./1000hrs: 11000 + 500 OIT: 2200/-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	500	-
6.1(Out of Roundness (Ovality))	-	0	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	-
7(Finish)	-	500	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5300	4800 + 500
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4500	4000 + 500
8.2(Reversion Test)	-	700	-
8.3(Density)	-	700	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
8.7(Volatile Matter Content)	-	700	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1800	1300+500
8.9(Resistance to Weathering)	-	15500	COnditioning : 36000/- Elongation: 1300 + 500 Hydraulic: 11000 + 500 OIT: 2200
6.4(Length of Pipe)	-	500	-
8.4(Melt Flow Rate (MFR))	-	1100	-
8.5(Pigment Dispersion)	-	700	-
8.10(Slow Crack Growth Rate Test)	-	10800	Acceptance: 80deg./165hrs: 4800 + 500/- Type test: 80deg./500 hrs: 5500 + 500/-
8.11(Squeeze-off)	-	6600	Squeeze: 60 min to 180 min: 1300/- Hydro: 4800 + 500/-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	700	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	-
5.1, 5.7 Table 2(iv) Volatile content)	-	700	-
5.1, 5.7 Table 2(v) Water content1))	-	700	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	700	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	Chemicals charges will be extra
5.6(ii) Hydraulic characteristics)	-	0	-
5.6(iii) Thermal stability (Oxidation induction time))	-	2200	-
6(Dimensions of pipes)	-	500	-
7(Finish)	-	500	-
8.1(Hydraulic Characteristics)	-	0	-
8.2(Reversion test)	-	700	-
8.3(Density)	-	700	-
8.4(Melt Flow Rate)	-	1100	-
8.5(Pigment Dispersion)	-	700	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
8.7(Volatile Matter Content)	-	700	-
8.9(Resistance to Weathering)	-	0	36000/- for conditioning
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1800	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-of)	-	0	-
10(Marking)	-	500	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	-
4.2(Grade of material)	-	0	-
4.3(Nominal Diameter)	-	0	-
4.4(Colour)	-	0	-
5.1(Polyethylene compound)	-	0	-
5.7(PE Compound Quality Evaluation)	-	0	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	0	-
5.6(Resistance to Weathering)	-	0	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	0	-
6.1(Out of Roundness (Ovality))	-	0	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	0	-
7(Finish)	-	0	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	0	-
8.2(Reversion Test)	-	0	-
8.3(Density)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.9(Resistance to Weathering)	-	0	-
6.4(Length of Pipe)	-	0	-
8.4(Melt Flow Rate (MFR))	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-off)	-	0	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	0	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	0	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	0	-
5.1, 5.7 Table 2(iv) Volatile content)	-	0	-
5.1, 5.7 Table 2(v) Water content1))	-	0	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	0	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	-
5.6(ii) Hydraulic characteristics)	-	0	-
5.6(iii) Thermal stability (Oxidation induction time))	-	0	-
6(Dimensions of pipes)	-	0	-
7(Finish)	-	0	-
8.1(Hydraulic Characteristics)	-	0	-
8.2(Reversion test)	-	0	-
8.3(Density)	-	0	-
8.4(Melt Flow Rate)	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.9(Resistance to Weathering)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-of)	-	0	-
10(Marking)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	0	-

-
Included w.e.f 12.11.2025 Exclusion: Cl 5.3 (Anti-oxidant), 5.4 (U-V stabilizer)

3081

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Efficiency calculations)	-	60000	-
6(Efficiency test circuits)	-	60000	-
7(Loss measurement)	-	20000	-
Annex A(Power conditioner description)	-	20000	-
Annex B(Power efficiency and conversion factor)	-	20000	-
Annex C(Weighted average energy efficiency)	-	20000	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	20000	-
4(Efficiency measurement conditions)	-	60000	-
4.1(DC power source for testing)	-	20000	-
4.2(Temperature)	-	20000	-
4.3(Output voltage and frequency)	-	20000	-
4.4(Input voltage)	-	20000	-
4.5(Ripple and distortion)	-	20000	-
4.6(Resistive loads/utility grid)	-	20000	-
4.7(Reactive loads)	-	20000	-
4.8(Resistive plus non-linear loads)	-	20000	-
4.9(Complex loads)	-	20000	-
5(Efficiency calculations)	-	60000	-
6(Efficiency test circuits)	-	60000	-
7(Loss measurement)	-	60000	-
Annex A(Power conditioner description)	-	20000	-
Annex B(Power efficiency and conversion factor)	-	20000	-
Annex C(Weighted average energy efficiency)	-	20000	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	20000	-
4(Efficiency measurement conditions)	-	60000	-
4.1(DC power source for testing)	-	20000	-
4.2(Temperature)	-	20000	-
4.3(Output voltage and frequency)	-	20000	-
4.4(Input voltage)	-	20000	-
4.5(Ripple and distortion)	-	20000	-
4.6(Resistive loads/utility grid)	-	20000	-
4.7(Reactive loads)	-	20000	-
4.8(Resistive plus non-linear loads)	-	20000	-
4.9(Complex loads)	-	20000	-

-
Included w.e.f. 04.11.2025

3082

Perfect International Testing Lab

8187826

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	250	N/A
7.0(Marking and instructions)	-	500	N/A
8.0(Protection against access to live part test)	-	500	N/A
9.0(Starting of motor-operated appliances test)	-	0	N/A
10.0(Power Input and current test)	-	500	N/A
11.0(Heating test)	-	500	N/A
13.0(Leakage current and electric strength test)	-	500	N/A
14.0(Transient voltages)	-	500	N/A
15.0(Moisture Resistance)	-	1000	N/A
16.0(Leakage current and electric strength test)	-	500	N/A
17.0(Overload protection of transformers test)	-	500	N/A
18.0(Endurance test)	-	0	N/A
19.0(Abnormal Operations)	-	500	N/A
20.0(Stability and Mechanical Hazards)	-	500	N/A
21.0(Mechanical Strength)	-	500	N/A
22.0(Construction verification related tests)	-	1000	N/A
23.0(Internal wiring)	-	500	N/A
24.0(Components)	-	500	N/A
25.0(Supply connections and External Flexible Cords)	-	500	N/A
26.0(Terminal for External Conductors)	-	500	N/A
27.0(Provision for Earthing)	-	500	N/A
28.0(Screws and connections)	-	500	N/A
29.0(Clearances and Creepage distances and solid insulation)	-	250	N/A
30.0(Resistance to heat and fire)	-	250	N/A
31.0(Resistance to rusting)	-	250	N/A
32.0(Radiation, Toxicity and Similar hazards)	-	0	N/A
19.11.4.1(Electrostatic discharges)	-	1000	N/A
19.11.4.2(Radiated fields)	-	0	N/A
19.11.4.3(Fast transient bursts)	-	0	N/A
19.11.4.4(Surge immunity test)	-	1000	N/A
19.11.4.5(Immunity to conducted discharges)	-	0	N/A
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	N/A
19.11.4.7(Harmonics)	-	0	N/A
4(General Requirements)	-	0	N/A
5(General condition for the tests)	-	0	N/A
22.111(Pyrolytic self-cleaning)	-	500	N/A
6.0(Classification)	-	0	N/A
7.0(Marking and instructions)	-	0	N/A
8.0(Protection against access to live part test)	-	0	N/A
9.0(Starting of motor-operated appliances test)	-	0	N/A
10.0(Power Input and current test)	-	0	N/A
11.0(Heating test)	-	0	N/A
13.0(Leakage current and electric strength test)	-	0	N/A
14.0(Transient voltages)	-	0	N/A
15.0(Moisture Resistance)	-	0	N/A
16.0(Leakage current and electric strength test)	-	0	N/A
17.0(Overload protection of transformers test)	-	0	N/A
18.0(Endurance test)	-	0	N/A
19.0(Abnormal Operations)	-	0	N/A
20.0(Stability and Mechanical Hazards)	-	0	N/A
21.0(Mechanical Strength)	-	0	N/A
22.0(Construction verification related tests)	-	0	N/A
23.0(Internal wiring)	-	0	N/A
24.0(Components)	-	0	N/A
25.0(Supply connections and External Flexible Cords)	-	0	N/A
26.0(Terminal for External Conductors)	-	0	N/A
27.0(Provision for Earthing)	-	0	N/A
28.0(Screws and connections)	-	0	N/A
29.0(Clearances and Creepage distances and solid insulation)	-	0	N/A
30.0(Resistance to heat and fire)	-	0	N/A
31.0(Resistance to rusting)	-	0	N/A
32.0(Radiation, Toxicity and Similar hazards)	-	0	N/A
19.11.4.1(Electrostatic discharges)	-	0	N/A
19.11.4.2(Radiated fields)	-	0	N/A
19.11.4.3(Fast transient bursts)	-	0	N/A
19.11.4.4(Surge immunity test)	-	0	N/A
19.11.4.5(Immunity to conducted discharges)	-	0	N/A
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	N/A
19.11.4.7(Harmonics)	-	0	N/A
4(General Requirements)	-	0	N/A
5(General condition for the tests)	-	0	N/A
22.111(Pyrolytic self-cleaning)	-	0	N/A
6.0(Classification)	-	-	-
7.0(Marking and instructions)	-	-	-
8.0(Protection against access to live part test)	-	-	-
9.0(Starting of motor-operated appliances test)	-	-	-
10.0(Power Input and current test)	-	-	-
11.0(Heating test)	-	-	-
13.0(Leakage current and electric strength test)	-	-	-
14.0(Transient voltages)	-	-	-
15.0(Moisture Resistance)	-	-	-
16.0(Leakage current and electric strength test)	-	-	-
17.0(Overload protection of transformers test)	-	-	-
18.0(Endurance test)	-	-	-
19.0(Abnormal Operations)	-	-	-
20.0(Stability and Mechanical Hazards)	-	-	-
21.0(Mechanical Strength)	-	-	-
22.0(Construction verification related tests)	-	-	-
23.0(Internal wiring)	-	-	-
24.0(Components)	-	-	-
25.0(Supply connections and External Flexible Cords)	-	-	-
26.0(Terminal for External Conductors)	-	-	-
27.0(Provision for Earthing)	-	-	-
28.0(Screws and connections)	-	-	-
29.0(Clearances and Creepage distances and solid insulation)	-	-	-
30.0(Resistance to heat and fire)	-	-	-
31.0(Resistance to rusting)	-	-	-
32.0(Radiation, Toxicity and Similar hazards)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
19.11.4.2(Radiated fields)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.5(Immunity to conducted discharges)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.7(Harmonics)	-	-	-
4(General Requirements)	-	-	-
5(General condition for the tests)	-	-	-
22.111(Pyrolytic self-cleaning)	-	-	-

02 Sep, 2028

-
Included w.e.f. 15.10.2025 Exclusion: "19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 24.0 (Components) 32.0 (Radiation, Toxicity and Similar hazards) "

3083

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

9189614

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

Bio Diesel (B-100)

18560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-i)(Appearance, visual)	-	200	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	960	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	-
4.4-Table 1-ii)(Colour, visual)	-	200	-

-
Exclusion: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-ii) (Colour, visual) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

3084

IEC TEST LABS LLP

8165726

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	1000	-
Cl-5, Table-1 (i)(Tensile strength)	-	2000	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	2000	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	3000	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	3000	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	2000	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	2000	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	2000	-
Cl-5, Table-1 (iv)(Shrinkage)	-	2000	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	5000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	2000	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	1000	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	1000	-
Cl-7(Armouring)	-	1000	-
Cl-8(Outer Sheath)	-	1000	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	2000	-
Cl-11(Core Identification)	-	1000	-
Cl-12(Laying up of Cores)	-	1000	-
Cl-13(Inner Sheath (Common Covering))	-	1000	-
Cl-14.1(Armouring- Application)	-	1000	-
Cl-14.1.2(armour round wires/formed wires)	-	1000	-
Cl-14.2(Type of Armour)	-	1000	-
Cl-14.3(Dimensions)	-	2000	-
Cl-14.4(Joints)	-	1000	-
Cl-14.5(Resistance)	-	2000	-
Cl-15.3(Thickness of Outer Sheath)	-	2000	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	2000	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	2000	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	2000	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	2000	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	2000	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	2000	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	2000	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	2000	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	2000	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	2000	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	2000	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	2000	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	2000	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	3000	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	3000	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	2000	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	2000	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	2000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	2000	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	2000	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	5000	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	2000	-
Cl-17.2(High voltage test)	-	2000	-
Cl-17.3(Flammability test)	-	2000	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	3000	-
Cl-17.5(Flame retardance test on single cable)	-	2000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	3000	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	3000	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	3000	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	3000	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	5000	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	2000	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	2000	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 15.10.2025

3085

Intertek India Private Limited (Gujarat)

7166626

IS/IEC 61730 : PART 2 (2023)

Photovoltaic (PV) Module - Safety Qualification Part 2 Requirements for Testing (Second Revision)

1853690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Visual inspection MST 01)	-	30960	-
10.3(Performance at STC MST 02)	-	529200	-
10.4(Maximum power determination MST 03)	-	99360	-
10.5(Insulation thickness test MST 04)	-	8886	-
10.6(Durability of markings MST 05)	-	8886	-
10.7(Sharp edge test MST 06)	-	8886	-
10.8(Bypass diode functionality test MST 07)	-	22608	-
10.9(Accessibility test MST 11)	-	8886	-
10.1(Cut susceptibility test MST 12)	-	8886	-
10.11(Continuity test of equipotential bonding MST 13)	-	8886	-
10.12(Impulse voltage test MST 14)	-	8886	-
10.13(Insulation test MST 16)	-	22770	-
10.14(Wet leakage current test MST 17)	-	60840	-
10.16(Hot-spot endurance test MST 22)	-	120960	-
10.17(Fire test MST 23)	-	8886	-
10.18(Ignitability test MST 24)	-	8886	-
10.19(Bypass diode thermal test MST 25)	-	22608	-
10.20(Reverse current overload test MST 26)	-	8886	-
10.21(Module breakage test MST 32)	-	8886	-
10.22(Screw connections test MST 33)	-	8886	-
10.23(Static mechanical load test MST 34)	-	24624	-
10.24(Peel test MST 35)	-	8886	-
10.25(Lap shear strength test MST 36)	-	8886	-
10.26(Materials creep test MST 37)	-	8886	-
10.27(Robustness of terminations test MST 42)	-	2289	-
10.28(Thermal cycling test MST 51)	-	169344	-
10.29(Humidity freeze test MST 52)	-	63676	-
10.30(Damp heat test MST 53)	-	220563	-
10.31(UV test MST 54)	-	96336	-
10.32(Cold conditioning test MST 55)	-	100000	-
10.33(Dry heat conditioning test MST 56)	-	100000	-
10.34(Evaluation of insulation coordination MST 57)	-	50000	-

-
Included w.e.f 08.12.2025

3086

Indian Oil Corporation Ltd (IOCL) Mughalsarai Terminal Laboratory

9191314

IS 17021 (2018)

E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	Visual Appearance
4.2-Table 1-ii)(Colour)	-	200	Visual Colour
4.2-Table 1-iii)(Density at 15°C, kg/m3)	-	1130	-
4.2-Table 1-iv)(Distillation a) percent evaporated at 70 °C (E70 °C), percent v/v b) percent evaporated at 100 °C (E100 °C), percent v/v c) percent evaporated at 150 °C (E150 °C ), percent v/v, Min d) Final Boiling Point, °C, Max e) Residue, percent by volume, Max)	-	2650	-
4.2-Table 1-vii)(Gum content (Solvent washed), g/m3 , Max)	-	2070	-
4.2-Table 1-viii)(Total Sulphur, mg/kg, Max)	-	4710	-
4.2-Table 1-xiii)(Copper strip corrosion (3 h at 50 °C), Max)	-	1130	-
4.2-Table 1-xx)(Ethanol content6), percent, v/v)	-	690	-
4.2-Table 1-xxii)(Motor Gasoline Content, percent, v/v)	-	690	-
4.3(Ethanol Content)	-	690	-

26 Nov, 2028

-
Exclusions: 4.1 (Description) 4.2-Table 1-v) (Research Octane Number (RON), Min) 4.2-Table 1-vi) (Motor Octane Number (MON), Min) 4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.2-Table 1-x) (Reid Vapour pressure at 38°C, kPa, Max) 4.2-Table 1-xi) (Vapour Lock Index (VLI), Max a) Summer2) b) Other Months) 4.2-Table 1-xii) (Benzene content, percent by volume, Max) 4.2-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max a) other months b) Winter3)) 4.2-Table 1-xv) (Engine intake system cleanliness) 4.2-Table 1-xvi) (Olefin content, percent by volume, Max) 4.2-Table 1-xvii) (Oxidation stability, minutes, Min) 4.2-Table 1-xviii) (Aromatic content5), percent by volume, Max) 4.2-Table 1-xix) (Oxygen content, percent by mass, Max) 4.2-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates) 4.4 (Organic Oxygenates) 4.5 (Phosphorous) 6.1 (Packing) 6.2 (Marking) 4.2-Table 1-xxiii (Amendment No.3) (Water content)

3087

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	7000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	10000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	40000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	13000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	20000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	45000	-
"Cl. No.16 "(Safety Requirements)	-	61500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	7000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	10000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	40000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	13000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	20000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	45000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	5000	-
"Cl. No.16(b) "(Power input and current)	-	10500	-
"Cl. No.16(c) "(Heating)	-	17000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	6000	-
"Cl. No.16(e) "(Moisture resistance)	-	17000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	6000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	5000	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	5000	-
"Cl. No.20.3(c) "(c) Electric strength)	-	5000	-
"Cl. No.8.11 "(Thermostat function test)	-	3500	-
"Cl. No.5 "(Markings)	-	2000	-
4(Classification)	-	500	-
5(Marking)	-	2000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	500	-
8.2(Material and Finishes)	-	500	-
8.3(Thermal Insulation and Air Tightness)	-	500	-
8.4(Doors, Lids and Fittings)	-	500	-
8.5(Shelves and Containers)	-	500	-
8.6(Disposal of Defrost Water)	-	500	-
8.7(Refrigerating System)	-	500	-
8.8(Supply Cord)	-	500	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	5000	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	3500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	7000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	7000	-
10(Testing the Opening force of door(s) or lid(s))	-	10000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	40000	-
12(Testing the Mechanical strength of shelves and similar components)	-	13000	-
13(Water-vapour condensation test)	-	40000	-
14(Ice-making test (if applicable))	-	20000	-
15(Test for absence of odour and taste)	-	45000	-
16(a)(Protection against access to live parts)	-	5000	-
16(b)(Power input and current)	-	10500	-
16 (c(Heating)	-	17000	-
16(d)(Leakage current and electric strength at operating temperature)	-	6000	-
16(e)(Moisture resistance)	-	17000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	6000	-
17(Packing)	-	4000	-
18(Designation)	-	4000	-
19(Instructions for Use and Maintenance)	-	4000	-
20.3 (a)(Leakage Current Test)	-	5000	-
20.3 (b)(Earth Continuity Test)	-	5000	-
20.3 (c(Electric Strength Test)	-	5000	-

04 Jul, 2027

-
Included w.e.f 17.12.2025

3088

Indian Oil Corporation Ltd(IOCL), Visakha Smart Laboratory

6190814

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

21110 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Pour Point)	-	1900	For the financial year 2025-26
4.3(Asphaltene Content)	-	2270	For the financial year 2025-26
4.4(TOTAL SEDIMENT)	-	1740	For the financial year 2025-26
4.5(Spot Test)	-	410	For the financial year 2025-26
4.6-Table 1-i)(Acidity, inorganic)	-	960	For the financial year 2025-26
4.6-Table 1-ii)(Ash, percent by mass, Max)	-	2070	For the financial year 2025-26
4.6-Table 1-iv)(Gross, calorific value)	-	780	For the financial year 2025-26
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1130	For the financial year 2025-26
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	For the financial year 2025-26
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	For the financial year 2025-26
4.6-Table 1-viii)(Sediment, percent by mass, Max)	-	1740	For the financial year 2025-26
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	For the financial year 2025-26
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	For the financial year 2025-26
4.6-Table 1-iii)(Carbon residue, mass percent, Max)	-	1900	For the financial year 2025-26

14 Nov, 2028

-
Excluding: 4.1 (General) 5.1 (Packing) 5.2 (Marking)

3089

Indian Oil Corporation Ltd(IOCL), Visakha Smart Laboratory

6190814

IS 15770 (2021)

Heating Oil(LDO) - Specification

18590 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-i)(Acid number, mg KOH/gm, Max)	-	1140	For the financial year 2025-26
3.2-Table 1-ii)(Ash, percent by mass, Max)	-	2070	For the financial year 2025-26
3.2-Table 1-iv)(Pour Point, °C, Max a) Winter [November toFebruary (both months inclusive)], b) Summer (rest of the months in a year))	-	1900	For the financial year 2025-26
3.2-Table 1-vi)(Flash point, Pensky Martens ,°C, Min)	-	1900	For the financial year 2025-26
3.2-Table 1-vii)(Kinematic viscosity at 40 °C, mm2 /sec)	-	2270	For the financial year 2025-26
3.2-Table 1-ix)(Density at 15 °C, Kg/m3)	-	1130	For the financial year 2025-26
3.2-Table 1-x)(Water content, percent by volume, Max)	-	1130	For the financial year 2025-26
3.2-Table 1-xi)(Total sulphur, percent by mass)	-	2650	For the financial year 2025-26
3.2-Table 1-viii)(Sediment, percent by mass, Max)	-	1740	For the financial year 2025-26
3.2-Table 1-iii)(Carbon residue, on whole samples, percent by mass, Max)	-	1530	For the financial year 2025-26
3.2-Table 1-v)(Copper strip corrosion for 3 h at 100 °C)	-	1130	For the financial year 2025-26

14 Nov, 2028

-
Excluding: 3.1 (General) 5.1 (Packing) 5.2 (Marking)

3090

Indian Oil Corporation Ltd(IOCL), Visakha Smart Laboratory

6190814

IS 16861 (2018)

High flash high speed diesel fuel - Specification

25910 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3-Table 1-i)(Appearance)	-	200	For the financial year 2025-26
3.3-Table 1-ii)(Acid Number, mg KOH/g, Max)	-	2270	For the financial year 2025-26
3.3-Table 1-iii)(Ash, percent by mass, Max)	-	2070	For the financial year 2025-26
3.3-Table 1-iv)(Carbon residue on the 10 percent Volume Distillation Residue, mass %, Max)	-	1530	For the financial year 2025-26
3.3-Table 1-vi)(Pour Point2), Max a) Winter b) Summer)	-	1900	For the financial year 2025-26
3.3-Table 1-v)(Cetane index1), Min)	-	3770	For the financial year 2025-26
3.3-Table 1-vii)(Copper strip Corrosion for 3 h at 100°C)	-	1130	For the financial year 2025-26
3.3-Table 1-viii)(Distillation, percent (v/v), recovered a) at 350°C, Min b) at 370°C Min)	-	2650	For the financial year 2025-26
3.3-Table 1-ix)(Flash Point Pensky Martens closed cup °C, Min)	-	1900	For the financial year 2025-26
3.3-Table 1-x)(Kinematic viscosity, cSt, at 40°C)	-	2270	For the financial year 2025-26
3.3-Table 1-xi)(Density3) at 15°C, kg/m3 , Max)	-	1130	For the financial year 2025-26
3.3-Table 1-xii)(Total sulphur4), % by mass, Max)	-	4710	For the financial year 2025-26
3.3-Table 1-xiii)(Water content, ppm, max.)	-	4160	For the financial year 2025-26

14 Nov, 2028

-
Excluding: 3.1 (General) 3.2 (Composition) 3.3-Table 1-xv) (Oxidation Stability), g/m3 , Max) 3.3-Table 1-xvi) (Lubricity), Corrected WSD at 60°C, microns max) 5.1 (Packing) 5.2 (Marking)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number