BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14026 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3121

Planet Electro Labs Private Limited, Wazirpur

8185226

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	5000	-
Cl-5.2(Filter Pads)	-	4000	-
Cl-5.3(Sump Tank Capacities)	-	4000	-
Cl-5.4(Blower/Fan)	-	4000	-
Cl-5.4.3(Fan motor)	-	4000	-
Cl-5.5(Pump Set)	-	4000	-
Cl-5.6.1(Electrical wiring and connection)	-	4000	-
Cl-5.6.2(Suitable power cable)	-	4000	-
Cl-5.7(Switches)	-	4000	-
Cl-6(Rating Requirement)	-	4000	-
Cl-8.1(Performance Requirement)	-	4000	-
Cl-8.2(Sound Test)	-	5000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	10000	-
Cl-8.4(Cooling Efficiency Test)	-	10000	-
Cl-8.5(Power Consumption)	-	5000	-
Cl-8.6(EER Calculation Method)	-	4000	-
Cl-8.7(Drop Test)	-	4000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	5000	-
Cl-12.2.2(Protection against Electric Shock)	-	2000	-
Cl-12.2.3(High Voltage Tests)	-	5090	-
Cl-12.2.4(Leakage Current)	-	2000	-
Cl-12.2.5(Provision for Earthing)	-	5000	-
Cl-12.2.6(Finish)	-	2000	-
Cl-13(Additional Requirement for ECO-Mark)	-	2000	-
Cl-14(Storage)	-	4000	-

08 May, 2028

-
Included w.e.f 03.07.2025

3122

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 6587 (2023)

Textiles - Spun hemp yarn - Specification (second revision)

All

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Hemp Fibre)	-	5000	-
4.2(Yarn)	-	2000	-
4.3(Skein)	-	2000	-
5.1(Fibre Identification)	-	5000	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	1000	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	1000	-
Cl. 5.2 Table-1(Variety no.)	-	1000	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	3000	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	3000	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	4000	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	4000	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	4000	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	4000	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	4000	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	2000	-
Cl. 5.2 Table-1(Ash Content)	-	2000	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	3000	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-
4.1(Hemp Fibre)	-	0	-
4.2(Yarn)	-	0	-
4.3(Skein)	-	0	-
5.1(Fibre Identification)	-	0	-
5.3(Rot Proofing Treatment- Zinc content (in case Zinc Naphthenate is used))	-	0	-
5.3(Rot Proofing Treatment- copper content (in case Copper Naphthenate is used))	-	0	-
Cl. 5.2 Table-1(Variety no.)	-	0	-
Cl. 5.2 Table-1(Linear Density- Untarred)	-	0	-
Cl. 5.2 Table-1(Linear Density-Tarred)	-	0	-
Cl. 5.2 Table-1(Turns Per Metre of Piled Yarn)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Untarred)	-	0	-
Cl. 5.2 Table-1(Runnage (M/25 Kg),-Tarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) -Untarred)	-	0	-
Cl. 5.2 Table-1(Breaking Load (60cm Test Length) - Tarred)	-	0	-
Cl. 5.2 Table-1(Tar Content for Tarred Yarn)	-	0	-
Cl. 5.2 Table-1(Ash Content)	-	0	-
Cl. 5.2 Table-1(Water Soluble Matter Content)	-	0	-

08 May, 2028

-
Included w.e.f 17.06.2025

3123

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

BWP/ MR/Cellular/Hollow/Tubular/decorative veneered/ prelaminated particle board/HDF/MDF

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	300	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	0	-
Cl-10.1(various test)	-	22000	-
Cl-10.2(End Immersion Test)	-	2500	-
Cl-10.3(Glue Adhesion Test)	-	1500	-
Cl-13(Marking)	-	0	-
Cl-6.1.(Timber)	-	0	-
Cl-5(Sizes and Tolerances)	-	0	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	0	-
Cl-10.1(various test)	-	0	-
Cl-10.2(End Immersion Test)	-	0	-
Cl-10.3(Glue Adhesion Test)	-	0	-
Cl-13(Marking)	-	0	-
Cl-6.1.(Timber)	-	0	-
Cl-5(Sizes and Tolerances)	-	0	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	0	-
Cl-10.1(various test)	-	0	-
Cl-10.2(End Immersion Test)	-	0	-
Cl-10.3(Glue Adhesion Test)	-	0	-
Cl-13(Marking)	-	0	-
Cl-6.1.(Timber)	-	0	-
Cl-5(Sizes and Tolerances)	-	0	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	0	-
Cl-10.1(various test)	-	0	-
Cl-10.2(End Immersion Test)	-	0	-
Cl-10.3(Glue Adhesion Test)	-	0	-
Cl-13(Marking)	-	0	-
Cl-6.1.(Timber)	-	0	-

26 Aug, 2027

-
Included w.e.f 04.06.2025

3124

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

48500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(i)(Main Chemical constituent-Sodium/Potassium bicarbonate )	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture content)	-	10000	-
Clause 5 Table 1(viii)(Rate of flow)	-	10000	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	10000	-
Clause 5 Table 1(x)(Fire test)	-	40000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	10000	-
Clause 5 Table 1(xii)(colour)	-	5000	-
Clause 5 Table 1(i)(Main chemical constituent-(Monoammonuim phosphate))	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture content)	-	10000	-
Clause 5 Table 1(viii)(Rate of flow)	-	10000	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	10000	-
Clause 5 Table 1(x)(Fire test)	-	40000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	10000	-
Clause 5 Table 1(xii)(colour)	-	5000	-
Clause 5 Table 1(i)(Main chemical constituent(Eutectic mixture of chlorides of sodium, potassium and barium))	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture content)	-	10000	-
Clause 5 Table 1(viii)(Rate of flow)	-	10000	-
Clause 5 Table 1(x)(Fire test)	-	40000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	10000	-
Clause 5 Table 1(xii)(colour)	-	5000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'D' Powder)	-	1000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'BC' Powder)	-	1000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'ABC' Powder)	-	1000	-
Clause No. 5, Sr. No. XI of Table 1, Annex-K(Temperature Resistance Test)	-	10000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'D')	-	40000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'B')	-	40000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'A')	-	40000	-
Clause No. 5, Sr. No. IX of Table 1, Annex-H(Foam Compatibility)	-	10000	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic for Class D Powder)	-	10000	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic)	-	10000	-
Clause No. 5, Sr. No. VII of Table 1, Annex-F(Moisture Content)	-	10000	-
Clause No. 5, Sr. No. VI of Table 1, Annex-E(Water Repellency)	-	10000	-
Clause No. 5, Sr. No. V of Table 1, Annex-D(Hygroscopicity)	-	10000	-
Clause No. 5, Sr. No. IV of Table 1, Annex-C(Particle Size/ Sieve Analysis)	-	10000	-
Clause No. 5, Sr. No. III of Table 1, Annex-B(Aparent Denisty)	-	10000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for D Powder)	-	10000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for BC Powder)	-	10000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for ABC Powder)	-	10000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for D Powder)	-	10000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for BC Powder)	-	10000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent of ABC Powder)	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(i)(Minimum main chemical constituent)	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(v)(Hygroscopicity)	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture Content)	-	10000	-
Clause 5 Table 1(xii)(Colour)	-	5000	-

08 May, 2028

-
included w.e.f.01.08.2025

3125

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4509 (2024)

RING SLUGGING WRENCHES (SPANNERS) â SPECIFICATION (second revision)

all

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimensions)	-	15000	-
Clause.4.0(Carbon)	-	15000	-
Clause.4.0(Sulphur)	-	15000	-
Clause.4.0(Phosphorus)	-	15000	-
Clause.4.0(Niobium)	-	15000	-
Clause.4.0(Vanadium)	-	15000	-
Clause.4.0(Nickel)	-	15000	-
Clause.4.0(Molybdenum)	-	15000	-
Clause.4.0(Chromium)	-	15000	-
Clause.4.0(Silicon)	-	15000	-
Clause.4.0(Manganese)	-	15000	-
Clause.5.0(Hardness)	-	15000	-
Clause.6.0(Manufacture ,Workmanship & finish)	-	15000	-
Clause.7.0(Preservation & packing)	-	15000	-
Clause.8.0(Sampling)	-	15000	-
Clause.9.0(Designation)	-	15000	-
Clause.10.0(Marking)	-	15000	-

31 Dec, 2026

-
Included w.e.f.20.06.2025

3126

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4508 (2024)

OPEN ENDED SLUGGING WRENCHES ( SPANNERS ) - SPECIFICATION ( Second Revision )

all

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimensions)	-	15000	-
Clause.4.0(Carbon)	-	15000	-
Clause.4.0(Sulphur)	-	15000	-
Clause.4.0(Phosphorus)	-	15000	-
Clause.4.0(Nickel)	-	15000	-
Clause.4.0(Molybdenum)	-	15000	-
Clause.4.0(Chromium)	-	15000	-
Clause.4.0(Silicon)	-	15000	-
Clause.4.0(Manganese)	-	15000	-
Clause.5.0(Hardness)	-	15000	-
Clause.6.0(Manufacture,Workmanship & finish)	-	15000	-
Clause.7.0(Preservation & packing)	-	15000	-
Clause.8.0(Sampling)	-	15000	-
Clause.9.0(Designation)	-	15000	-
Clause.10.0(Marking)	-	15000	-
Clause. 3.0(Dimensions)	-	15000	-
Clause.4.0(Carbon)	-	15000	-
Clause.4.0(Sulphur)	-	15000	-
Clause.4.0(Phosphorus)	-	15000	-
Clause.4.0(Nickel)	-	15000	-
Clause.4.0(Molybdenum)	-	15000	-
Clause.4.0(Chromium)	-	15000	-
Clause.4.0(Silicon)	-	15000	-
Clause.4.0(Manganese)	-	15000	-
Clause.5.0(Hardness)	-	15000	-
Clause.6.0(Manufacture,Workmanship & finish)	-	15000	-
Clause.7.0(Preservation & packing)	-	15000	-
Clause.8.0(Sampling)	-	15000	-
Clause.9.0(Designation)	-	15000	-
Clause.10.0(Marking)	-	15000	-

31 Dec, 2026

-
Included w.e.f 15.07.2025

3127

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4003 : Part 1 (2024)

Pipe Wrenches - Specification Part 1 General Purpose(Second revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimensions)	-	30000	-
Clause.5.0(Carbon)	-	30000	-
Clause.5.0(Sulphur)	-	30000	-
Clause.5.0(Phosphorus)	-	30000	-
Clause.5.0(Niobium)	-	30000	-
Clause.5.0(Vanadium)	-	30000	-
Clause.5.0(Nickel)	-	30000	-
Clause.5.0(Molybdenum)	-	30000	-
Clause.5.0(Chromium)	-	30000	-
Clause.5.0(Silicon)	-	30000	-
Clause.5.0(Manganese)	-	30000	-
Clause.6.0(Hardness)	-	30000	-
Clause.7.0(Manufacture)	-	30000	-
Clause.7.1(Handle)	-	30000	-
Clause.7.2(Movable Jaws)	-	30000	-
Clause.7.3(Adjusting Nut)	-	30000	-
Clause.7.4(Frame)	-	30000	-
Clause.7.5(Hinge Pin)	-	30000	-
Clause.7.6(Spring)	-	30000	-
Clause.8.0(Workmanship & finish)	-	30000	-
Clause.9.0(Operation)	-	30000	-
Clause.10.0(Sampling)	-	30000	-
Clause.11.0(Tests)	-	30000	-
Clause.11.1(Static Load Test)	-	30000	-
Clause.11.2(Static-Shock Load Test)	-	30000	-
Clause.12.0(Designation)	-	30000	-
Clause.13(Marking)	-	30000	-
Clause. 4.0(Dimensions)	-	30000	-
Clause.5.0(Carbon)	-	30000	-
Clause.5.0(Sulphur)	-	30000	-
Clause.5.0(Phosphorus)	-	30000	-
Clause.5.0(Niobium)	-	30000	-
Clause.5.0(Vanadium)	-	30000	-
Clause.5.0(Nickel)	-	30000	-
Clause.5.0(Molybdenum)	-	30000	-
Clause.5.0(Chromium)	-	30000	-
Clause.5.0(Silicon)	-	30000	-
Clause.5.0(Manganese)	-	30000	-
Clause.6.0(Hardness)	-	30000	-
Clause.7.0(Manufacture)	-	30000	-
Clause.7.1(Handle)	-	30000	-
Clause.7.2(Movable Jaws)	-	30000	-
Clause.7.3(Adjusting Nut)	-	30000	-
Clause.7.4(Frame)	-	30000	-
Clause.7.5(Hinge Pin)	-	30000	-
Clause.7.6(Spring)	-	30000	-
Clause.8.0(Workmanship & finish)	-	30000	-
Clause.9.0(Operation)	-	30000	-
Clause.10.0(Sampling)	-	30000	-
Clause.11.0(Tests)	-	30000	-
Clause.11.1(Static Load Test)	-	30000	-
Clause.11.2(Static-Shock Load Test)	-	30000	-
Clause.12.0(Designation)	-	30000	-
Clause.13(Marking)	-	30000	-

31 Dec, 2026

-
Included w.e.f 15.07.2025

3128

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
10.1(Power input)	-	5000	-
10.2(Current input)	-	5000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
14(Transient Over Voltages)	-	500	-
15.0(General)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
18(Endurance Test requirements and tests)	-	500	-
19(Abnormal Operation)	-	500	-
20(Stability test)	-	500	-
21(Mechanical Strength Test)	-	500	-
22(Construction verification related test)	-	500	-
23(General)	-	500	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	500	-
28(Screw test and connections)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
18(Endurance)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
11.4(Heating appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.7(Duration corresponding)	-	500	-
11.8(Temperature rise)	-	500	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classification- IS 302-1)	-	500	-

03 Dec, 2026

-
Included w.e.f 09.06.2025 Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC), Cl 32 (Radiation, Toxicity and similar Hazard ) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

3129

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 18161 (2023)

Textiles Light weight jute sacking bags for packing 50 kg mustard seed niger seed and ragi Specification

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture)	-	1000	-
4.1.1(Manufacture)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
4.2(Seam)	-	1000	-
4.3(Safety Stitch)	-	1000	-
4.3(Safety Stitch)	-	1000	-
4.4(Hemming at the Mouth)	-	1000	-
4.4(Hemming at the Mouth)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.5 & 8.4.1 Annex- B(Freedom from Defects)	-	1000	-
4.1 & 5.1, Table 1, i(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, i(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, i(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, iii(Dimensions)	-	1000	-
4.1 & 5.1, Table 1, iv(Dimensions)	-	2000	-
4.1 & 5.1, Table 1, v(Average Breaking strength)	-	2000	-
4.1 & 5.1, Table 1, v(Average Breaking strength)	-	2000	-
4.1 & 5.1, Table 1, vi(Average Breaking strength)	-	1000	-
4.1 & 5.1, Table 1, vii(Moisture Regain, % IS 9113 (Cl.8.2))	-	2000	-
4.1 & 5.1, Table 1, viii(Oil comtent IS: 9113(Cl.8.8))	-	2000	-
4.1.1 & 5.1, Table 1, ii(Ends/dm)	-	2000	-
5.4.2.1, Table 3, i(Non-halogenated hydrocarbons)	-	5000	-
5.4.2.1, Table 3, ii(Pesticides (Sum parameter))	-	5000	-
5.4.2.1, Table 3, iii(pH of aqueous extract)	-	1000	-
5.4.2.1, Table 3, iv(Coupled amines from azo-dyes)	-	5000	-

08 May, 2028

-
-

3130

Sleen India Biz venture Private Limited, Agra

9139736

IS 15354 : Part 1 (2023)

Single-use medical examination gloves Part 1 Specification for gloves made from rubber latex or rubber solution Second Revision

type-1/type-2

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.3(Finish)	-	500	-
Cl-5(Materials)	-	1000	-
Cl-7.1, Table-2(Size code)	-	500	-
Cl-7.1, Table-2(Width corresponding to size code (dimension w, Figure 1))	-	500	-
Cl-7.1, Table-2(Descriptive size)	-	500	-
Cl-7.1, Table-2(Width corresponding to descriptive size (dimension w, Figure 1))	-	500	-
Cl-7.1, Table-2(Minimum length (dimension l, Figure 1))	-	500	-
Cl-7.1, Table-2(Minimum thickness (at locations shown in Figure 1))	-	500	-
Cl-7.1, Table-2(Maximum thickness (at approximate centre of palm))	-	500	-
Cl-7.2(Water tightness)	-	2000	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum force at break before accelerated ageing, N)	-	750	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum elongation at break before accelerated ageing, %)	-	750	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum force at break after accelerated ageing, N)	-	500	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum elongation at break after accelerated ageing, %)	-	500	-
Cl-9(Marking)	-	500	-
Cl-4.3(Finish)	-	0	-
Cl-5(Materials)	-	0	-
Cl-7.1, Table-2(Size code)	-	0	-
Cl-7.1, Table-2(Width corresponding to size code (dimension w, Figure 1))	-	0	-
Cl-7.1, Table-2(Descriptive size)	-	0	-
Cl-7.1, Table-2(Width corresponding to descriptive size (dimension w, Figure 1))	-	0	-
Cl-7.1, Table-2(Minimum length (dimension l, Figure 1))	-	0	-
Cl-7.1, Table-2(Minimum thickness (at locations shown in Figure 1))	-	0	-
Cl-7.1, Table-2(Maximum thickness (at approximate centre of palm))	-	0	-
Cl-7.2(Water tightness)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum force at break before accelerated ageing, N)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum elongation at break before accelerated ageing, %)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum force at break after accelerated ageing, N)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum elongation at break after accelerated ageing, %)	-	0	-
Cl-9(Marking)	-	0	-
Cl-4.3(Finish)	-	0	-
Cl-5(Materials)	-	0	-
Cl-7.1, Table-2(Size code)	-	0	-
Cl-7.1, Table-2(Width corresponding to size code (dimension w, Figure 1))	-	0	-
Cl-7.1, Table-2(Descriptive size)	-	0	-
Cl-7.1, Table-2(Width corresponding to descriptive size (dimension w, Figure 1))	-	0	-
Cl-7.1, Table-2(Minimum length (dimension l, Figure 1))	-	0	-
Cl-7.1, Table-2(Minimum thickness (at locations shown in Figure 1))	-	0	-
Cl-7.1, Table-2(Maximum thickness (at approximate centre of palm))	-	0	-
Cl-7.2(Water tightness)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum force at break before accelerated ageing, N)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum elongation at break before accelerated ageing, %)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum force at break after accelerated ageing, N)	-	0	-
Cl-7.3.2 & 7.3.3, Table-3(Minimum elongation at break after accelerated ageing, %)	-	0	-
Cl-9(Marking)	-	0	-

15 May, 2027

-
Included w.e.f 03.06.2025 Exclusion: Cl-7.4 (Sterility)

3131

Perfect International Testing Lab

8187826

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	N/A
8(Protection against access to live parts)	-	1000	N/A
10(Power input and current)	-	1000	N/A
11(Heating)	-	2000	N/A
12(Charging of metal-ion batteries)	-	1000	N/A
13.1 &13.2(Leakage current test)	-	1000	N/A
13.1 &13.3(Electric strength test)	-	2000	N/A
14(Transient overvoltages)	-	2000	N/A
15(Moisture resistance)	-	2000	N/A
15.3(Moisture resistance)	-	1000	N/A
16.1 &16.2(Leakage current test)	-	1000	N/A
16.1 & 16.3(Electric strength test)	-	1000	N/A
17(Overload protection of transformers and associated circuits)	-	1000	N/A
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	N/A
19.101(Abnormal operation)	-	1000	N/A
20.1(Stability and mechanical hazards)	-	1000	N/A
20.2(Stability and mechanical hazards)	-	0	N/A
21(Mechanical strength)	-	1000	N/A
21.101(Mechanical strength)	-	0	N/A
21.102(Mechanical strength)	-	0	N/A
21.103(Mechanical strength)	-	0	N/A
22(Construction)	-	1000	N/A
22.101(Construction)	-	0	N/A
22.102(Construction)	-	1000	N/A
22.103(Construction)	-	1000	N/A
23(Internal wiring)	-	2000	N/A
24(Components)	-	0	N/A
25("Supply connection and external flexible cords")	-	1000	N/A
26("Terminals for external conductors")	-	1000	N/A
27(Provision for earthing)	-	1000	N/A
28(Screws and connections)	-	1000	N/A
29("Clearances, creepage distances and solid insulation")	-	1000	N/A
30(Resistance to heat and fire)	-	2000	N/A
31(Resistance to rusting)	-	2000	N/A
32("Radiation, toxicity and similar hazards")	-	0	N/A
19.11.4.1(Electrostatic discharges)	-	0	N/A
19.11.4.2(Radiated fields)	-	0	N/A
19.11.4.3(Fast transient bursts)	-	0	N/A
19.11.4.4(Surge immunity test)	-	0	N/A
19.11.4.5(Immunity to conducted discharges)	-	0	N/A
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	N/A
19.11.4.7(Harmonics)	-	0	N/A

02 Sep, 2028

-
Exclusion: 19.11.4.1 to 19.11.4.7 (EMI/EMC), 32 (Radiation, Toxicity and similar Hazard ), 24 (COMPONENTS)

3132

Perfect International Testing Lab

8187826

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	500	N/A
5(General conditions for the tests)	-	500	N/A
6(Classification)	-	1000	N/A
7(Marking and instructions)	-	1000	N/A
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	N/A
10(Power input and current)	-	2000	N/A
11(Heating)	-	1000	N/A
11.3(Heating)	-	1000	N/A
11.7(Heating)	-	500	N/A
11.8(Heating)	-	500	N/A
12(Charging of metal-ion batteries)	-	1000	N/A
13(Leakage current and electric strength at operating temperature)	-	2000	N/A
14(Transient overvoltages)	-	2000	N/A
15(MOISTURE RESISTANCE)	-	2000	N/A
16(Leakage current and electric strength)	-	1000	N/A
17(Overload protection of transformers and associated circuits)	-	1000	N/A
19(ABNORMAL OPERATION)	-	2000	N/A
19.11.4.1(Electrostatic discharges)	-	0	N/A
19.11.4.2(Radiated fields)	-	0	N/A
19.11.4.3(Fast transient bursts)	-	0	N/A
19.11.4.4(Voltage surges)	-	0	N/A
19.11.4.5(Injected currents)	-	0	N/A
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	N/A
19.11.4.7(Mains signals)	-	0	N/A
20("STABILITY AND MECHANICAL HAZARDS")	-	1000	N/A
21(MECHANICAL STRENGTH)	-	1000	N/A
22(CONSTRUCTION)	-	1000	N/A
23(INTERNAL WIRING)	-	2000	N/A
24(COMPONENTS)	-	0	N/A
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	1000	N/A
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	N/A
27(PROVISION FOR EARTHING)	-	1000	N/A
28(SCREWS AND CONNECTIONS)	-	1000	N/A
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	N/A
31(RESISTANCE TO RUSTING)	-	1000	N/A
32(Radiation, toxicity and similar hazards)	-	0	N/A
29(Clearances, creepage distances and solid insulation)	-	2000	N/A

02 Sep, 2028

-
Exclusion: 19.11.4.1 to 19.11.4.7 (EMI/EMC), 32 (Radiation, Toxicity and similar Hazard ), 24 (COMPONENTS)

3133

Planet Electro Labs Private Limited, Wazirpur

8185226

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	2000	-
31.0(Resistance To Rusting)	-	2000	-
30.0(Resistance To Heat and Fire)	-	2000	-
29.0(Creepage Distances and Clearances)	-	2000	-
28.0(Screws and Connections)	-	2000	-
27.0(Provision For Earthing)	-	2000	-
26.0(Terminals for external conductors)	-	2000	-
25.0(Supply Connection and External Flexible Cords)	-	2000	-
24.0(Components)	-	2000	-
23.0(Internal Wiring)	-	2000	-
22.0(Construction)	-	2000	-
21.0(Mechanical Strength)	-	2000	-
20.0(Stability and mechanical hazards)	-	2000	-
19.0(Abnormal Operation)	-	2000	-
17.0(Overload Protection of transformer and associated circuit)	-	2000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	2000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	2000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2000	-
11.0(Heating)	-	2000	-
10.0(Input and Current)	-	2000	-
8.0(Protection against access to live parts)	-	2000	-
7.0(Classification)	-	2000	-
6.0(Marking and Instructions)	-	2000	-
4(GENERAL REQUIREMENT)	-	2000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

08 May, 2028

-
Included w.e.f 03.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

3134

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

ALL

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl - 9.1,9.5,13.2(Thickness or Diameter)	-	270	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP)	-	270	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP)	-	270	-
Cl - 9.1,9.5,13.2(Tensile Strength)	-	270	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Long.)	-	270	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.)	-	270	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.)	-	270	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.)	-	270	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition)	-	270	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition)	-	270	-
Cl - 9.1,9.5,13.2(Hardness)	-	270	-
Cl - 9.1,9.5,13.2(Elongation After Fracture)	-	270	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	270	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.)	-	270	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	270	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	270	-
Cl-7.1, 7.2(C)	-	270	-
Cl-7.1, 7.2(Si)	-	270	-
Cl-7.1, 7.2(Mn)	-	270	-
Cl-7.1, 7.2(P)	-	270	-
Cl-7.1, 7.2(S)	-	270	-
Cl-7.1, 7.2(Cr)	-	270	-
Cl-7.1, 7.2(Mo)	-	270	-
Cl-7.1, 7.2(Ni)	-	270	-
Cl-7.1, 7.2(N)	-	270	-
Cl-7.1, 7.2(Cu)	-	270	-
Cl-7.1, 7.2(Ti)	-	270	-
Cl-7.1, 7.2(W)	-	270	-
Cl-7.1, 7.2(Nb)	-	270	-
cL-7.1, 7.2(Co)	-	270	-
Cl-7.1, 7.2(Ti: (C + N))	-	270	-
Cl-7.1, 7.2(V)	-	270	-
Cl-7.1, 7.2(Al)	-	270	-
Cl-7.1, 7.2(Boron)	-	270	-
Cl-7.1, 7.2(Tungsten)	-	270	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1((Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.))	-	270	-
Cl 6((freedom from defects))	-	270	-
Cl. 12((dimension and tolerance))	-	270	-
Cl. 14((corrosion resistance))	-	270	-

13 May, 2028

-
Included w.e.f.30.05.2025

3135

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

All

140000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Nominal Size(DN))	-	0	-
3.2(Nominal Outside Diameter)	-	500	-
3.3(Mean Inside Diameter of Socket at Entry)	-	500	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	-
3.5(Out-of-Roundness (Ovality))	-	500	-
3.6(Nominal Wall Thickness)	-	500	-
3.7(Minimum Wall Thickness)	-	500	-
3.8(Tolerance)	-	0	-
3.9(Working Pressure)	-	0	-
3.1(Standard Dimension Ratio)	-	0	-
3.11(Type Tests)	-	85000	-
3.11(Acceptance Tests)	-	1000	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	1000	-
8.2(Opacity)	-	1000	-
8.1(Visual Appearance)	-	100	-
8.3(Stress Relief Test)	-	1500	-
8.4(Vicat softening Temperature)	-	1500	-
8.5(Density)	-	1500	-
8.6(Effect on water)	-	7000	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
Cl-6.2.2(Compound Chlorine Content)	-	2000	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	10000	-
Cl-9.1(Hydrostatic Characteristics)	-	16000	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	75000	-
3.1(Nominal Size(DN))	-	0	-
3.2(Nominal Outside Diameter)	-	1000	-
3.3(Mean Inside Diameter of Socket at Entry)	-	1000	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	1000	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	1000	-
3.5(Out-of-Roundness (Ovality))	-	100	-
3.6(Nominal Wall Thickness)	-	1000	-
3.7(Minimum Wall Thickness)	-	1000	-
3.8(Tolerance)	-	0	-
3.9(Working Pressure)	-	0	-
3.1(Standard Dimension Ratio)	-	0	-
3.11(Type Tests)	-	85000	-
3.11(Acceptance Tests)	-	55000	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	1000	-
8.2(Opacity)	-	1500	-
8.1(Visual Appearance)	-	100	-
8.3(Stress Relief Test)	-	1500	-
8.4(Vicat softening Temperature)	-	1500	-
8.5(Density)	-	1500	-
8.6(Effect on water)	-	7000	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
Cl-6.2.2(Compound Chlorine Content)	-	2000	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	10000	-
Cl-9.1(Hydrostatic Characteristics)	-	16000	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	75000	-

18 Dec, 2027

-
Included w.e.f 11.06.2025

3136

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

260000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	100000	-
Cl 7.2.2(SIZE (width))	-	10000	-
Cl 7.2.2(SIZE (Height))	-	10000	-
Cl 7.3.2(SIZE (width))	-	10000	-
Cl 7.3.2(SIZE (Height))	-	10000	-
Cl 7.4.2(SIZE (width))	-	10000	-
Cl 7.4.2(SIZE (Height))	-	10000	-
Cl 7.5.2(SIZE (width))	-	10000	-
Cl 7.5.2(SIZE (Height))	-	10000	-
7.3.1(MOISTURE CONTENT)	-	10000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	10000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	10000	-
7.2.7(Vision Pane (Insulated door) Width)	-	10000	-
7.2.7(Vision Pane (Insulated door) Height)	-	10000	-
7.3.4(Vision Pane (Width))	-	10000	-
7.3.4(Vision Pane (Height))	-	10000	-
Cl-7.2.1(Material)	-	10000	-
Cl-7.2.4(Fire Door Frames)	-	10000	-
Cl-7.2.5(Door Leaf)	-	10000	-
Cl-7.2.8(Louvres)	-	10000	-
Cl-7.2.9(Builder’s Hardware)	-	10000	-
Cl-7.4.3(Construction)	-	10000	-
Cl-7.4.5(Operator)	-	10000	-
Cl-7.5.1(Material)	-	10000	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	10000	-
Cl-11.3.1(Walls)	-	10000	-
Cl-11.4.1(Closing Devices)	-	10000	-
Cl-11.4.2(Releasing Devices)	-	10000	-
Cl-11.4.3(Hardware)	-	10000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	100000	-
Cl-7.2.3(Construction)	-	10000	-
Cl-7.2.6(Intumescent Seal)	-	10000	-
Cl-7.3.6(Builder’s Hardware)	-	10000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	100000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	100000	-
Cl-7.6(General Requirement of Fire Doors)	-	100000	-
Cl-7.3.3(Construction)	-	10000	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	10000	-

08 May, 2028

-
Included w.e.f.01.08.2025

3137

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 2167 (2024)

Commercial Beverage Coolers - Classification, Requirements and Test Conditions (Third Revision)

Commercial Beverage Coolers

198000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification according to temperature)	-	500	-
Cl-5.2.1.1(Strength and rigidity)	-	1000	-
Cl-5.2.1.2(Pipes and connections)	-	1000	-
Cl-5.2.2(Materials)	-	1000	-
Cl-5.2.3(Thermal insulation)	-	1000	-
Cl-5.2.4(Refrigerating system)	-	1000	-
Cl-5.2.5(Electrical components)	-	1000	-
Cl-6.2.1(General)	-	0	-
Cl-6.2.2(Seal test for doors and lids)	-	5000	-
Cl-6.2.3(Test on durability of door and lid.)	-	50000	-
Cl-6.2.4(Linear dimensions, areas and volumes)	-	1000	-
Cl-6.3.2(Test room condition)	-	0	-
Cl-6.3.3(M-can)	-	0	-
Cl-6.3.4(Preparation of test commercial beverage cooler and general test procedures)	-	10000	-
Cl-6.3.5(Loading the commercial beverage cooler)	-	10000	-
Cl-6.3.6(Running in period)	-	5000	-
Cl-6.3.7(Stable conditions)	-	10000	-
Cl-6.3.8(Lighting and night-covers)	-	1000	-
Cl-6.3.9(Power supply)	-	1000	-
Cl-6.3.10(Testing several commercial beverage coolers in the same room)	-	0	-
Cl-6.3.11(Test with M-cans)	-	40000	-
Cl-6.3.12(Water vapour condensation test)	-	38000	-
Cl-6.3.13(Calculation of specific energy consumption (SEC).)	-	5000	-
Cl-6.3.14(Lighting test)	-	5000	-
Cl-6.4(Test report)	-	5000	-
Cl-7(Marking)	-	2000	-

19 Mar, 2026

-
Included w.e.f 29.07.2025

3138

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	2000	-
5(General conditions for the tests)	-	2000	-
6(Classification)	-	2000	-
7(Marking and instructions)	-	2000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
11.3(Heating)	-	2000	-
11.7(Heating)	-	2000	-
11.8(Heating)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
29(Clearances, creepage distances and solid insulation)	-	2000	-
4(General)	-	2000	-
5(General conditions for the tests)	-	2000	-
6(Classification)	-	2000	-
7(Marking and instructions)	-	2000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
11.3(Heating)	-	2000	-
11.7(Heating)	-	2000	-
11.8(Heating)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
29(Clearances, creepage distances and solid insulation)	-	2000	-

14 Nov, 2027

-
Included w.e.f. 12.11.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

3139

NAYRA LABORATORIES (INDIA) LLP

8188136

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	100	-
Cl. No.5("SIZE AND FITTINGS ")	-	200	-
Cl. No.6("CONSTRUCTION ")	-	100	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	600	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	600	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	600	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	600	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	500	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	200	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	700	-
Cl. No.8.4,Table no. 5(i)(Density)	-	200	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	600	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	700	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2100	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	600	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1200	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	2100	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	600	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1200	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	600	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	700	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1000	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1200	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	600	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	500	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	200	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	700	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	200	-
Cl-10 (Amendment No-1)(Marking)	-	300	-

10 Sep, 2028

-
Exclusion: Cl. No.8. ("Requirement of Complete Sandal and Slipper (Chemical Requirements) ") Cl. No.8.6.1,Table 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes) Cl. No.8.6.1,Table 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)) Cl. No.8.6.1,Table 1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)) Cl. No.8.6.1,Table 1 of IS 17011(iv) (Chromium (VI)) Cl. No.8.6.1,Table 1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols) Cl. No.8.6.1,Table 1 of IS 17011(v) (Dimethyl fumarate (DMFU)) Cl. No.8.6.1,Table 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)) Cl. No.8.6.1,Table 1 of IS 17011(vii) (Formaldehyde) Cl. No.8.6.1,Table 1 of IS 17011(viii) (Organotin compounds) Cl. No.8.6.1,Table 1 of IS 17011(x) (pH) Cl. No.8.6.1,Table 1 of IS 17011(xi) (Phthalates (each individual phthalate)) Cl. No.8.6.1,Table 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) Cl. No.8.6.2 (Lead content) Cl.8 - Table No 1 - Sl. No.-xiv (pH- IS 1390:2022) Cl.8 - Table No 1 - Sl. No.-xv ("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988") Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1) (Chemical Requirements) Cl.8 Table-1 S.No 1, (xv) (Amendment No-1) (Lead content (as Pb)7 ppm)

3140

NAYRA LABORATORIES (INDIA) LLP

8188136

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	200	-
Cl No.4.2(Construction)	-	200	-
Cl No.4.3(Whole Footwear)	-	200	-
4.3.1(Insole)	-	100	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
4.3.6(Energy Absorption at Seat Region)	-	800	-
4.3.7(Complete Shoe Flexing)	-	800	-
4.3.8(Washability)	-	800	-
4.3.9(Slip Resistance)	-	1200	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	800	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	800	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2100	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	1200	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	800	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	800	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1200	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	800	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	600	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2100	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	800	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	800	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	600	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	800	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	600	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	600	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	600	-
Cl No . 5(MARKING AND PACKING)	-	200	-
Clause 4.2 - 4.2.1(Construction)	-	200	-
Clause 4.2 - 4.2.2(Construction)	-	200	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	200	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	300	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	500	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	500	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	800	-
Clause 4.4, Table 1 ii)(Tear strength)	-	500	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	800	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	500	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	500	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	500	-
Clause 4.4, Table 2 iii)(Tear strength)	-	500	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1200	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.6, Table 4 i)(Thickness)	-	200	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	800	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	800	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	800	-
Clause 4.7, Table 5 i)(Thickness)	-	200	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	1200	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	800	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	800	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	600	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	600	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2100	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	500	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	800	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	200	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	300	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	500	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	800	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	800	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	800	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	1200	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	600	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2100	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	500	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2100	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1200	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	800	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	800	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1200	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	600	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2100	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	800	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	800	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	800	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	800	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	800	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	600	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	800	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	600	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	600	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	600	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	600	-

10 Sep, 2028

-
Exclusion: Cl No . 4.14 ("Chemical Requirement on Complete Product for all Types of Sports Shoe") Cl No . 4.14, Table no. 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes) Cl No . 4.14, Table no. 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)) Cl No . 4.14, Table no. 1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)) Cl No . 4.14, Table no. 1 of IS 17011(iv) (Chromium (VI)) Cl No . 4.14, Table no. 1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols) Cl No . 4.14, Table no. 1 of IS 17011(v) (Dimethyl fumarate (DMFU)) Cl No . 4.14, Table no. 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)) Cl No . 4.14, Table no. 1 of IS 17011(vii) (Formaldehyde) Cl No . 4.14, Table no. 1 of IS 17011(viii) (Organotin compounds) Cl No . 4.14, Table no. 1 of IS 17011(x) (pH) Cl No . 4.14, Table no. 1 of IS 17011(xi) (Phthalates (each individual phthalate)) Cl No . 4.14, Table no. 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) Cl No.4.4 , Table No. 2 , vi) ("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)") Cl-5, Table -1 S. No- (x) (Amendment No-1) (Chemical requirements) Cl-5, Table -1 S. No- (xii) (Amendment No-1) (Lead content) Cl-6, Table -2 S. No- (v),(Amendment No-1) (Colour fastness to light grey scale rate,)

3141

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17788 (2021)

Medical Textiles Nonwoven Fabric for Wipes Specification

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Fibre identification)	-	10000	-
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	1000	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	1000	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	1000	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	1000	-
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	1000	-
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	1000	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	1000	-
Clause 6.1, Table 1, (vi)(pH)	-	1000	-

08 May, 2028

-
Included w.e.f 17.06.2025

3142

NAYRA LABORATORIES (INDIA) LLP

8188136

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	200	-
5(DESIGN)	-	100	-
6(SIZE AND FITTINGS)	-	200	-
7.1.1(Whole Footwear)	-	200	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
7.1.5(Energy Absorption at Seat Region)	-	700	-
7.1.6(Complete Shoe Flexing)	-	800	-
7.1.7(Washability)	-	800	-
7.1.8(Slip Resistance)	-	1200	-
7.1.9(Heel Drop)	-	300	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1000	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	800	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	800	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	500	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	500	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	500	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1200	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	500	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	500	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1000	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	800	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	800	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	1500	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	600	-
7.3 , Table No. 4 , i)(Tear strength,)	-	500	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	1200	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	600	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	800	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	800	-
7.4 , Table No. 5 , i)(Thickness)	-	100	-
7.4 , Table No. 5 , ii)(Flexing index)	-	800	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	800	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , i)(Thickness)	-	100	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	1200	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	800	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	600	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	600	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	600	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2100	-
7.6 , Table No. 7 , iv)(Tear strength)	-	500	-
7.6 , Table No. 7 , v)(Tensile strength)	-	500	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	500	-
7.6 , Table No. 7 , vii)(Compression set)	-	600	-
7.7 , Table No. 8 , i)(Compression set)	-	600	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	600	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	500	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	800	-
7.8 , Table No. 9 , ii)(Resilience)	-	800	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	800	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	800	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	800	-
7.8 , Table No. 9 , v)(Peel strength)	-	500	-
7.9 , Table No. 10 , i)(Peel strength)	-	700	-
7.9 , Table No. 10 , ii)(Shear strength)	-	700	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	500	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	500	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	800	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	600	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	500	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	500	-
8(MARKING AND PACKING)	-	300	-

10 Sep, 2028

-
Exclusion: 7.12 ("Chemical Requirement on Complete Product for All Types of Sports Shoe") 7.12, Table no. 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes) 7.12, Table no. 1 of IS 17011,(ii) (Aromatic amines released from Azo dyes (each individual amine)) 7.12, Table no. 1 of IS 17011,(iii) (Aromatic amines released from Azo dyes (each individual amine)) 7.12, Table no. 1 of IS 17011,(iv) (Chromium (VI)) 7.12, Table no. 1 of IS 17011,(ix) (PCP-TeCP-TriCP polychlorophenols) 7.12, Table no. 1 of IS 17011,(v) (Dimethyl fumarate (DMFU)) 7.12, Table no. 1 of IS 17011,(vi) (Formaldehyde (free or released by partial hydrolysis)) 7.12, Table no. 1 of IS 17011,(vii) (Formaldehyde) 7.12, Table no. 1 of IS 17011,(viii) (Organotin compounds) 7.12, Table no. 1 of IS 17011,(x) (pH) 7.12, Table no. 1 of IS 17011,(xi) (Phthalates (each individual phthalate)) 7.12, Table no. 1 of IS 17011,(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) 7.12.2 (Amendment 1) (Lead content) 7.2 , Table No. 2 , vi) ("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)") 7.2 , Table No. 3 , viii) (Colour fastness to light grey scale rate)

3143

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

ALL

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	1000	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	5000	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	1000	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	1000	-
6(Packing)	-	1000	-
7(Marking)	-	1000	-
5(Requirements)	-	1000	-
5.1(Workmanship and Finish)	-	1000	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	5000	-
5.2- Table 1- ii)(Tensile strength)	-	1000	-
5.2- Table 1- iii)(Bursting strength)	-	2000	-
6(Packing)	-	1000	-
7(Marking)	-	1000	-

08 May, 2028

-
Included w.e.f 03.06.2025

3144

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.5(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.8(Chain link fence fabric(Mass of zinc coating)- IS 6745)	-	200	-
Cl.8(Chain link fence fabric (Uniformity of Zinc coating)-IS 2633)	-	200	-
Cl.9.2(Line wire (Mass of zinc coating)- IS 6745)	-	200	-
Cl.9.2(Line Wire (Uniformity of Zinc coating)-IS 2633)	-	200	-
Cl.9.2(Mesh wire (Mass of zinc coating)- IS 6745)	-	200	-
Cl.9.2(Mesh Wire (Uniformity of Zinc coating)-IS 2633)	-	200	-
Cl.6.1, 6.2, Table 1(Mesh Size)	-	100	-
Cl.6.3, Table 1(Width of the fabric)	-	100	-
Cl.6.3, Table 1(Length of the fabric)	-	100	-
Cl.6.1, 6.2, Table 1(Nominal Dia of Mesh wire)	-	100	-
Cl. 7.2 and Table 1(Line Wire (Diameter))	-	100	-
Cl. 7.2 and Table 1(Line Wire (Number of wires))	-	100	-
Cl.9.1.1(Tensile test of mesh and line wires- IS 1608)	-	1200	-
Cl.9.1.2(Wrapping test of mesh and line wires-IS 1755)	-	600	-
Cl.9.1.3(Twist test of mesh and line wires-IS 1717)	-	600	-
Cl.9.1.4(Bend test of mesh and line wires- IS 1608)	-	500	-
Cl.5(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.5(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.8(Chain link fence fabric(Mass of zinc coating)- IS 6745)	-	0	-
Cl.8(Chain link fence fabric (Uniformity of Zinc coating)-IS 2633)	-	0	-
Cl.9.2(Line wire (Mass of zinc coating)- IS 6745)	-	0	-
Cl.9.2(Line Wire (Uniformity of Zinc coating)-IS 2633)	-	0	-
Cl.9.2(Mesh wire (Mass of zinc coating)- IS 6745)	-	0	-
Cl.9.2(Mesh Wire (Uniformity of Zinc coating)-IS 2633)	-	0	-
Cl.6.1, 6.2, Table 1(Mesh Size)	-	0	-
Cl.6.3, Table 1(Width of the fabric)	-	0	-
Cl.6.3, Table 1(Length of the fabric)	-	0	-
Cl.6.1, 6.2, Table 1(Nominal Dia of Mesh wire)	-	0	-
Cl. 7.2 and Table 1(Line Wire (Diameter))	-	0	-
Cl. 7.2 and Table 1(Line Wire (Number of wires))	-	0	-
Cl.9.1.1(Tensile test of mesh and line wires- IS 1608)	-	0	-
Cl.9.1.2(Wrapping test of mesh and line wires-IS 1755)	-	0	-
Cl.9.1.3(Twist test of mesh and line wires-IS 1717)	-	0	-
Cl.9.1.4(Bend test of mesh and line wires- IS 1608)	-	0	-
Cl.5(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.8(Chain link fence fabric (Number of dips of zinc coating))	-	0	-
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	0	-
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	0	-
Cl.9.2(Line Wire (Number of dips of zinc coating))	-	0	-
Cl.9.2(Mesh Wire (Number of dips of zinc coating))	-	0	-
Cl.9.2(Line Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	0	-
Cl.9.2(Line Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	0	-
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	0	-
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	0	-

19 Aug, 2027

-
Included w.e.f 06.06.2025

3145

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

496750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	500	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	-
5.1, 5.7 Table 2(iv) Volatile content)	-	700	-
5.1, 5.7 Table 2(v) Water content1))	-	700	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	700	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-
5.6(ii) Hydraulic characteristics)	-	11250	-
5.6(iii) Thermal stability (Oxidation induction time))	-	2200	-
8.5(Pigment Dispersion)	-	700	-
8.7(Volatile Matter Content)	-	700	-
8.3(Density)	-	500	-
8.2(Reversion Test)	-	700	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4250	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5050	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	-
6(Dimensions of pipes)	-	0	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	0	-
6.1(Out of Roundness (Ovality))	-	800	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	550	-
7(Finish)	-	300	-
5.7(PE Compound Quality Evaluation)	-	400000	-
8.9(Resistance to Weathering)	-	9000	-
5.6(Resistance to Weathering)	-	9000	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1350	-
8.11(Squeeze-of)	-	6350	-
8.10(Slow Crack Growth Rate Test)	-	5050	8.10.1 Acceptance Test 80 degree centigrade for 165 hrs.
8.10(Slow Crack Growth Rate Test)	-	5750	8.10.2 Type Test 80 degree centigrade for 500 hrs.
5.1(Polyethylene compound)	-	5000	-
4.4(Colour)	-	300	-
6.4(Length of Pipe)	-	0	-
10(Marking)	-	500	-

31 Dec, 2026

-
-

3146

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1090000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	3500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1500	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	150000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	100	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	10000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	35000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	7000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	7000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	4500	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	35000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	35000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	35000	-
11.2.2(Spark Test)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	10000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	1000	-
11.3.2(Sheath Marking)	-	1000	-
Annex J(Assessment of Halogens)	-	10000	-
11.3.3(Overall Diameters and Ovality)	-	1500	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	2000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	2000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	2000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	340000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	25000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2500	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	2000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	10000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	2100	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	40000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	5000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	2500	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	5000	-
5.2(Application to the Conductor)	-	100	-
5.3(Thickness)	-	500	-
6.2(Sheath application)	-	100	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	1000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	50000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	1500	-
Annex - B of IS 17293:2020(Compatibility test)	-	2500	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1500	-
Annex - E of IS 17293 : 2020(UV resistance)	-	50000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	35000	-
6.3(Sheath Thickness)	-	500	-
6.4(Sheath Colour)	-	1000	-
7(Overall Dimension)	-	500	-
8.1(Continuity of Marking)	-	500	-
8.2(Durability)	-	500	-
8.3(Legibility)	-	500	-
9(Core Identification)	-	500	-
12(Packing and Marking)	-	100	-
4.1(Resistance)	-	500	-
7.1.2.1, 7.2.3(Annealing)	-	500	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	1500	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	50000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
8.3(Legibility)	-	0	-
9(Core Identification)	-	0	-
12(Packing and Marking)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
8.3(Legibility)	-	0	-
9(Core Identification)	-	0	-
12(Packing and Marking)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-

15 Aug, 2028

-
Included w.e.f 19.06.2025

3147

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

ALL TYPES

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	26000	-
5.3(Manufacture and Workmanship)	-	26000	-
7.1.1(Material- Inner containers)	-	26000	-
7.1.2(Outer protective case and accessories - Thickness)	-	26000	-
7.1.2.1(Coating - Limit of lead)	-	26000	-
7.1.2.1(Coating - Limit of Cadmium)	-	26000	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	26000	-
7.3(Capacity)	-	26000	-
7.4(Heat Retention Capability)	-	26000	-
7.5(Cold Retention Capability)	-	26000	-
7.6.1(Drop Impact Test)	-	26000	-
7.6.2(Pendulum Impact Test)	-	26000	-
7.7(Fixing Strength of the Handle)	-	26000	-
7.8(Test for Strength of Shoulder Strap)	-	26000	-
7.8.1(Test for strength of cord)	-	26000	-
7.9(Leakage Test)	-	26000	-
7.10(Joint Leak Test)	-	26000	-
7.11(Staining Test)	-	26000	-
7.12(Length of the Shoulder Strap)	-	26000	-
7.13(Stability of Flask/Bottle)	-	26000	-
7.14(Pour Test)	-	26000	-
9.1(Marking)	-	26000	-
9.2(BIS certification marking)	-	26000	-
10(Packaging)	-	26000	-
7.1.2(Outer protective case and accessories - Material)	-	26000	-
7.1.2.1(Coating- Thickness test)	-	26000	-
7.1.2.1(Coating- Adhesion test)	-	26000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	26000	-
7.2(Arrangement for holding and suspension)	-	26000	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	26000	-
7.1.3(Overall migration)	-	26000	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	26000	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	26000	-
7.1.3(Stopper Material)	-	26000	-

13 May, 2028

-
Included w.e.f. 03.06.2025

3148

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 16362 (2024)

Geosynthetics - Geotextiles for Subsurface Drainage, Subgrade Separation, Subgrade Stabilization, Filtration and Erosion Control (In Hard Armor Systems) Applications - Specification (second revision)

Class 1H, Class 2H, Class 3H

296030 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(isophthalic acid content of the virgin polyester)	-	7210	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (a)(Type of geotextile)	-	500	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (b)(Roll length, m, Min)	-	500	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (c)(Roll width, m, Min)	-	500	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (d)(Grab strength, N, Min)	-	1500	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (e)(Sewn seam strength, N, Min (see Note 1))	-	1500	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (f)(Trapezoidal tear strength, N, Min)	-	1500	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (g)(CBR puncture strength, N, Min)	-	2700	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (h)(Abrasion strength)	-	2500	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (ii) (a)(Resistance to installation damage,percent retained strength, SC/SW/GP (see Note 3), Min)	-	150000	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (ii) (b)("Ultraviolet stability at 500 h, retained strength, percent of original strength, Min")	-	52000	-
Cl-5.2, 6.1.2, 8.4, Table-2, (ii)(Permittivity1), s-1, Min)	-	2100	-
Cl-5.2, 6.1.2, 8.4, Table-2, (iii)(AOS2,3), mm, Max)	-	1000	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (c)(Minimum retained ultimate tensile strength (for 100 years service life), percent)	-	71000	-
Cl-4.1(Material)	-	1520	-
Cl-5.1(Geotextiles)	-	0	-
Cl-5.2, 6.1.2, 8.4, Table-2, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (a)(Type of geotextile)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (b)(Roll length, m, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (c)(Roll width, m, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (d)(Elongation at break, Percentage, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (e)(Grab strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (f)(Trapezoidal tear strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (g)(CBR puncture strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (ii) (a)(Apparent opening size, mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (ii) (b)(Water flow rate normal to the plane, l/m2/s, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (a)(Abrasion strength, percentage retained strength in breaking load, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (b)(Resistance to UV light weathering, Percentage retained strength in breaking load after 500 h UV exposure, Min)	-	0	-
Cl-9(Marking)	-	0	-
Cl-4.2(isophthalic acid content of the virgin polyester)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (a)(Type of geotextile)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (b)(Roll length, m, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (c)(Roll width, m, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (d)(Grab strength, N, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (e)(Sewn seam strength, N, Min (see Note 1))	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (f)(Trapezoidal tear strength, N, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (g)(CBR puncture strength, N, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (h)(Abrasion strength)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (ii) (a)(Resistance to installation damage,percent retained strength, SC/SW/GP (see Note 3), Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (ii) (b)("Ultraviolet stability at 500 h, retained strength, percent of original strength, Min")	-	0	-
Cl-5.2, 6.1.2, 8.4, Table-2, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.1.2, 8.4, Table-2, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (c)(Minimum retained ultimate tensile strength (for 100 years service life), percent)	-	0	-
Cl-4.1(Material)	-	0	-
Cl-5.1(Geotextiles)	-	0	-
Cl-5.2, 6.1.2, 8.4, Table-2, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (a)(Type of geotextile)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (b)(Roll length, m, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (c)(Roll width, m, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (d)(Elongation at break, Percentage, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (e)(Grab strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (f)(Trapezoidal tear strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (g)(CBR puncture strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (ii) (a)(Apparent opening size, mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (ii) (b)(Water flow rate normal to the plane, l/m2/s, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (a)(Abrasion strength, percentage retained strength in breaking load, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (b)(Resistance to UV light weathering, Percentage retained strength in breaking load after 500 h UV exposure, Min)	-	0	-
Cl-9(Marking)	-	0	-
Cl-4.2(isophthalic acid content of the virgin polyester)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (a)(Type of geotextile)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (b)(Roll length, m, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (c)(Roll width, m, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (d)(Grab strength, N, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (e)(Sewn seam strength, N, Min (see Note 1))	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (f)(Trapezoidal tear strength, N, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (g)(CBR puncture strength, N, Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (h)(Abrasion strength)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (ii) (a)(Resistance to installation damage,percent retained strength, SC/SW/GP (see Note 3), Min)	-	0	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (ii) (b)("Ultraviolet stability at 500 h, retained strength, percent of original strength, Min")	-	0	-
Cl-5.2, 6.1.2, 8.4, Table-2, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.1.2, 8.4, Table-2, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (c)(Minimum retained ultimate tensile strength (for 100 years service life), percent)	-	0	-
Cl-4.1(Material)	-	0	-
Cl-5.1(Geotextiles)	-	0	-
Cl-5.2, 6.1.2, 8.4, Table-2, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.2.3, 8.4, Table-3, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.3.2, 8.4, Table-4, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (i)(Geotextile class)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (ii)(Permittivity1), s-1, Min)	-	0	-
Cl-5.2, 6.4.3, 8.4, Table-5, (iii)(AOS2,3), mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (a)(Type of geotextile)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (b)(Roll length, m, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (c)(Roll width, m, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (d)(Elongation at break, Percentage, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (e)(Grab strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (f)(Trapezoidal tear strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (i) (g)(CBR puncture strength, N, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (ii) (a)(Apparent opening size, mm, Max)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (ii) (b)(Water flow rate normal to the plane, l/m2/s, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (a)(Abrasion strength, percentage retained strength in breaking load, Min)	-	0	-
Cl-5.2, 7.2 & 8.4, Table-6 (iii) (b)(Resistance to UV light weathering, Percentage retained strength in breaking load after 500 h UV exposure, Min)	-	0	-
Cl-9(Marking)	-	0	-

-
-

3149

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

Grade 1/Grade 2

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	500	-
Cl 8(Dimensions & Tolerances)	-	1500	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	500	-
Cl 8(Dimensions & Tolerances)	-	1500	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.2(Test For Density)	-	500	-
Cl 8(Dimensions & Tolerances)	-	1500	-
Cl 7(Finish)	-	500	-
Cl 6(Manufacture)	-	0	-
Cl 4(Grades & Types)	-	0	-
Cl 10.15(Test for Formaldehyde Content/Emission)	-	1500	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

27 May, 2028

-
Included w.e.f.30.05.2025

3150

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

Insect Killers

156500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	100	-
5(General conditions for the tests)	-	100	-
6(Classification)	-	200	-
7(Marking and instructions)	-	400	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	2000	-
11.3(Heating)	-	2000	-
11.7(Heating)	-	2000	-
11.8(Heating)	-	2000	-
12(Charging of metal-ion batteries)	-	2500	-
13(Leakage current and electric strength at operating temperature)	-	800	-
14(Transient overvoltages)	-	1500	-
15(MOISTURE RESISTANCE)	-	3000	-
16(Leakage current and electric strength)	-	800	-
17(Overload protection of transformers and associated circuits)	-	1500	-
19(ABNORMAL OPERATION)	-	2500	-
19.11.4.1(Electrostatic discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.2(Radiated fields)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.3(Fast transient bursts)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.4(Voltage surges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.5(Injected currents)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.6(Class 3 Voltage dips and interruptions)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.7(Mains signals)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
20("STABILITY AND MECHANICAL HAZARDS")	-	800	-
21(MECHANICAL STRENGTH)	-	800	-
22(CONSTRUCTION)	-	2500	-
23(INTERNAL WIRING)	-	800	-
24(COMPONENTS)	-	200	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	800	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
27(PROVISION FOR EARTHING)	-	800	-
28(SCREWS AND CONNECTIONS)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1500	-
31(RESISTANCE TO RUSTING)	-	800	-
32(Radiation, toxicity and similar hazards)	-	2000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
4(General)	-	100	-
5(General conditions for the tests)	-	100	-
6(Classification)	-	200	-
7(Marking and instructions)	-	400	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	2000	-
11.3(Heating)	-	2000	-
11.7(Heating)	-	2000	-
11.8(Heating)	-	2000	-
12(Charging of metal-ion batteries)	-	2500	-
13(Leakage current and electric strength at operating temperature)	-	800	-
14(Transient overvoltages)	-	1500	-
15(MOISTURE RESISTANCE)	-	3000	-
16(Leakage current and electric strength)	-	800	-
17(Overload protection of transformers and associated circuits)	-	1500	-
19(ABNORMAL OPERATION)	-	2500	-
19.11.4.1(Electrostatic discharges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.2(Radiated fields)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.3(Fast transient bursts)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.4(Voltage surges)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.5(Injected currents)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.6(Class 3 Voltage dips and interruptions)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
19.11.4.7(Mains signals)	-	125000	EMI/EMC Test facility is available under our other BIS recognized lab.
20("STABILITY AND MECHANICAL HAZARDS")	-	800	-
21(MECHANICAL STRENGTH)	-	800	-
22(CONSTRUCTION)	-	2500	-
23(INTERNAL WIRING)	-	800	-
24(COMPONENTS)	-	200	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	800	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
27(PROVISION FOR EARTHING)	-	800	-
28(SCREWS AND CONNECTIONS)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1500	-
31(RESISTANCE TO RUSTING)	-	800	-
32(Radiation, toxicity and similar hazards)	-	2000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-

31 Dec, 2026

-
Included w.e.f 26.08.2025 Exclusion: Cl 24 COMPONENTS

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number