BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11971 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3181

DELHI TEST HOUSE, Azadhpur

8131406

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.3.1(Adhesion )	-	2000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.3.2(Impact Resistance)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.4(Load Resistance)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.5(Scratch Resistance)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.7(Dry Film Thickness)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 9.1(Workmanship)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.1(Corrosion Test)	-	2000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.2(Humidity Test)	-	4500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 11(Length, Width & Thickness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.3.1(Adhesion )	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.3.2(Impact Resistance)	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.2(Humidity Test)	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 11(Length, Width & Thickness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
8.6(Solvent Resistance test)	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
9.2(colour)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
9.3(Gloss (60 Deg))	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.1(Corrosion Test)	-	15	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
10.1(IS 9844)	-	15	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
7 & 7.3(ISO 2808)	-	2000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
11.0(Thickness)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra

17 Jun, 2027

-
-

3182

DELHI TEST HOUSE, Azadhpur

8131406

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl 7(Workmanship)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 6(Outer Diameter, Thickness & Mass)	-	1500	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1500	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1500	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	-
5 AND AS PER IS 10748(CARBON)	-	500	-
Clause - 5.1, Table-3( ALUMINIUM)	-	500	-
Clause - 5.1, Table-3(SILICON)	-	500	-
Clause - 5.1, Table-3(NITROGEN)	-	2000	-
Clause - 5.1, Table-3(MANGANESE)	-	500	-
Clause - 5.1, Table-3(SULPHUR)	-	500	-
Clause - 5.1, Table-3( CARBON)	-	500	-
9(Straightness)	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	1000	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	1000	-
Cl. 11.2 Table 2(Yield strength)	-	1000	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	1000	-
Clause 11.2, Table -2(Yield Strength)	-	1000	-
Cl 13(Workmanship)	-	200	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 6(Outer Diameter, Thickness & Mass)	-	1500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	1500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	1500	-
13.0(Oiling and Painting - Visual)	-	500	-

17 Jun, 2027

-
-

3183

DELHI TEST HOUSE, Azadhpur

8131406

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	250	NA
4(Size of fitting)	-	250	NA
5.1 Table-1 Fig.1(Dimension of Socket length)	-	250	NA
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	250	NA
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	250	NA
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	250	NA
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	1000	NA
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	2000	NA
8(Marking)	-	250	NA
6.3(Effect on water test)	-	5500	NA

17 Jun, 2027

-
-

3184

SHRI BAJRANG TESTING LABS, GREATER NOIDA

8183006

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

All

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	1500	-
Clause 7.3, Annex G(Average Breaking Load)	-	1000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	1000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	600	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	4500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	3000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	200	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	200	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	200	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	200	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	200	-
Clause 7.1.3 (Colour and Texture)	-	500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	700	-
Clause 7.1.1 (General Quality)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	0	-
Clause 3.20(Spacer nibs)	-	400	-
10(Marking)	-	500	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	0	-
Clause 7.3, Annex G(Individual Breaking Load)	-	0	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	0	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	0	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	-
Clause 7.1.3 (Colour and Texture)	-	0	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	0	-
Clause 7.1.1 (General Quality)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	0	-
Clause 3.20(Spacer nibs)	-	0	-
10(Marking)	-	0	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	0	-
Clause 7.3, Annex G(Individual Breaking Load)	-	0	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	0	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	0	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	-
Clause 7.1.3 (Colour and Texture)	-	0	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	0	-
Clause 7.1.1 (General Quality)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	0	-
Clause 3.20(Spacer nibs)	-	0	-
10(Marking)	-	0	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	0	-
Clause 7.3, Annex G(Individual Breaking Load)	-	0	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	0	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	0	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	0	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	-
Clause 7.1.3 (Colour and Texture)	-	0	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	0	-
Clause 7.1.1 (General Quality)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	0	-
Clause 3.20(Spacer nibs)	-	0	-
10(Marking)	-	0	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-

01 Dec, 2027

-
Included w.e.f.10.03.2025

3185

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 2618 (2016)

Laboratory glassware - Test tubes (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4, Table no. 1(i)("Water resistance ")	-	0	-
Cl. No. 4, Table no. 1(ii)(Acid resistance)	-	0	-
Cl. No. 4, Table no. 1(ii)(Alkali resistance)	-	0	-
Cl. No. 5, Table no.2 to 4(Construction and dimensions)	-	10000	-
Cl. No. 6("Marking ")	-	10000	-
Cl. No. 4, Table no. 1(i)("Water resistance ")	-	0	-
Cl. No. 4, Table no. 1(ii)(Acid resistance)	-	0	-
Cl. No. 4, Table no. 1(ii)(Alkali resistance)	-	0	-
Cl. No. 5, Table no.2 to 4(Construction and dimensions)	-	10000	-
Cl. No. 6("Marking ")	-	10000	-

-
Included w.e.f.13.02.2025

3186

Aaditech Test and Calibration Lab LLP

8179926

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

ELECTRICAL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.1(Marking )	-	1000	-
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(Mechanical strength )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.1(Marking )	-	1000	-
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(Mechanical strength )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
7.1, 7.5.4(Insulation Resistance)	-	1000	-

28 Aug, 2027

-
Included w.e.f 03.02.2025

3187

RTC cum Technology Back up Unit for Solar Thermal Devices (RTC), Pune

7165924

IS 16543 (2024)

All-glass evacuated solar collector tubes - Specification (First revision)

Non-Concentrating Type Solar Collector Hot water O/P

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.2.2(Uniformity)	-	0	GST Extra
Cl 7.4(Stagnation Performance Parameter Test)	-	750	GST Extra
Cl 7.5(Stagnation Solar Irradiation Test)	-	750	GST Extra
Cl 7.6(Average Heat Loss Coefficient Test)	-	750	GST Extra
Cl 7.7(Vacuum Performance Test)	-	1000	GST Extra
Cl 7.8(Resistance to Thermal Shock Test)	-	750	GST Extra
Cl 7.9(Resistance to Impact Test)	-	500	GST Extra
Cl 7.10(0 Resistance to Internal Pressure Test)	-	750	GST Extra
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	1500	GST Extra
Cl 5.1.1(Transmittance ratio ( material))	-	250	GST Extra
Cl 5.1.2(Bubble & crack (material))	-	0	GST Extra
Cl 5.1.3(Knots (material))	-	0	GST Extra
Cl 5.1.4(Solar absorbing ratio (material))	-	0	GST Extra
Cl 5.2.1(Scratch length and visibility)	-	0	GST Extra
Cl 5.2.3(Colour fading area)	-	0	GST Extra
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	0	GST Extra
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	0	GST Extra
Cl 5.2.8(Cross-section of the open end)	-	0	GST Extra
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	250	GST Extra
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	0	GST Extra
Cl 4.2 & table 1(Tube Length)	-	0	GST Extra
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	0	GST Extra
Cl 4.2 & table 1(Sealed off Part Length)	-	0	GST Extra
Cl 4.3(Absorber Area for Different Tube Sizes)	-	0	GST Extra
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	0	GST Extra
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	0	GST Extra
Cl 5.2.2(Appearance of selective coating)	-	0	GST Extra
Cl 5.2.5(The inner and cover tube at the open end)	-	0	GST Extra
Cl 5.2.9(Sealed end)	-	0	GST Extra
Cl 9(Marking)	-	250	GST Extra
Cl 4.4(Solar Selective Absorbing Coating)	-	0	GST Extra
Cl 5.2.4(Strut member)	-	0	GST Extra
Cl 7.2.2(Uniformity)	-	0	GST Extra
Cl 7.4(Stagnation Performance Parameter Test)	-	750	GST Extra
Cl 7.5(Stagnation Solar Irradiation Test)	-	750	GST Extra
Cl 7.6(Average Heat Loss Coefficient Test)	-	750	GST Extra
Cl 7.7(Vacuum Performance Test)	-	1000	GST Extra
Cl 7.8(Resistance to Thermal Shock Test)	-	750	GST Extra
Cl 7.9(Resistance to Impact Test)	-	500	GST Extra
Cl 7.10(0 Resistance to Internal Pressure Test)	-	750	GST Extra
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	1500	GST Extra
Cl 5.1.1(Transmittance ratio ( material))	-	250	GST Extra
Cl 5.1.2(Bubble & crack (material))	-	0	GST Extra
Cl 5.1.3(Knots (material))	-	0	GST Extra
Cl 5.1.4(Solar absorbing ratio (material))	-	0	GST Extra
Cl 5.2.1(Scratch length and visibility)	-	0	GST Extra
Cl 5.2.3(Colour fading area)	-	0	GST Extra
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	0	GST Extra
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	0	GST Extra
Cl 5.2.8(Cross-section of the open end)	-	0	GST Extra
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	250	GST Extra
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	0	GST Extra
Cl 4.2 & table 1(Tube Length)	-	0	GST Extra
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	0	GST Extra
Cl 4.2 & table 1(Sealed off Part Length)	-	0	GST Extra
Cl 4.3(Absorber Area for Different Tube Sizes)	-	0	GST Extra
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	0	GST Extra
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	0	GST Extra
Cl 5.2.2(Appearance of selective coating)	-	0	GST Extra
Cl 5.2.5(The inner and cover tube at the open end)	-	0	GST Extra
Cl 5.2.9(Sealed end)	-	0	GST Extra
Cl 9(Marking)	-	250	GST Extra
Cl 4.4(Solar Selective Absorbing Coating)	-	0	GST Extra
Cl 5.2.4(Strut member)	-	0	GST Extra

26 Oct, 2026

-
Included.w.e.f.15.01.2025

3188

National Test House (WR) - NTH, Mumbai

7107604

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	5000	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	500	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	500	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	500	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	1500	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	-
Cl-15.3(Resistance to Humidity)	-	1500	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	500	-
Cl-19(Normal operation)	-	2500	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	500	-
Cl-25(Resistance to rusting)	-	500	-
19.1(Test for Switches Intended for Inductive Loads)	-	1000	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	2500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	2500	-
13.5(Attachment of knobs)	-	1000	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	1000	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	1000	-
Cl-11(Provision for earthing)	-	500	-
Cl-12(Terminals)	-	500	-
Cl-13(Constructional requirements)	-	500	-
Cl-14(Mechanism)	-	500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	500	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1500	-
Cl-19(Normal operation)	-	2000	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	500	-
Cl-24.2(Resistance to tracking)	-	500	-
Cl-25(Resistance to rusting)	-	500	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1500	-
13.5(Attachment of knobs)	-	500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	1000	-
12.3.12(Table 13)(Deflection Test Forces)	-	500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General notes on tests)	-	500	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	500	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	500	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	500	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	500	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	500	-
Cl-12(Terminals)	-	500	-
Cl-13(Constructional requirements)	-	500	-
Cl-14(Mechanism)	-	500	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	500	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1500	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	1000	-
Cl-24.2(Resistance to tracking)	-	500	-
Cl-25(Resistance to rusting)	-	500	-
19.1(Test for Switches Intended for Inductive Loads)	-	1500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1500	-
13.5(Attachment of knobs)	-	500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	500	-
12.3.12(Table 13)(Deflection Test Forces)	-	500	-

24 Jul, 2025

-
Included .w.e.f.06.02.2025

3189

National Test House (WR) - NTH, Mumbai

7107604

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	500	-
6(Standard ratings)	-	500	-
7(Classification)	-	500	-
8(Marking)	-	1000	-
9(Dimensions)	-	1500	-
10(Protection against electric shock)	-	500	-
11(Terminals)	-	1000	-
12(Provision for earthing)	-	500	-
13(Construction)	-	1000	-
14(Switched lampholders)	-	1000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	2500	-
16(Mechanical strength)	-	500	-
17(Screws, current-carrying parts and connections)	-	500	-
18(Creepage distances and clearances)	-	500	-
19(General resistance to heat)	-	1000	-
20(Resistance to heat, fire and tracking)	-	1000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-
Annex A(Season cracking/corrosion test)	-	1000	-
12.4(Thermal tests)	-	1000	-
9.1(Lampholder dimensions)	-	1000	-
11.2(Terminals)	-	1000	-
12.3(Provision for earthing)	-	500	-
13.1(Construction)	-	500	-
13.8(Construction)	-	500	-
14.4(Switched lampholders)	-	1000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	1000	-
16.7(Mechanical strength)	-	500	-
16.8(Mechanical strength)	-	500	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-

24 Jul, 2025

-
Included.w.e.f.13.01.2025

3190

Testtex India Laboratories Pvt. Ltd., Mumbai

7126506

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	500	Complete Test Charges - Rs 11,000 + GST [Except Cl.7.6-Phthalates]; Complete Test Charges - Rs 15,000 + GST [Including Cl.7.6-Phthalates]; All Prices are Except Cl.7.4 - Biocompatibility Evaluation-Cytotoxicity, Irritation and Skin Sensitization & Cl.7.5
3.2(Absorbent Core)	-	500	NA
3.3(Barrier or Bottom Sheet)	-	200	NA
4.1 (1)(Type and shapes of sanitary napkins)	-	200	NA
4.2(Sanitary napkins shape & design)	-	200	NA
Cl 5(SIZES, Regular )	-	125	Except Cl.7.4-Biocompatibility Evaluation-Cytotoxicity, Irritation and Skin Sensitization. Cl.7.5-Biodegradibility and Compost ability (Optional)
Cl 5(SIZES, Large)	-	125	NA
Cl 5(SIZES, Extra Large)	-	125	NA
Cl 5(Absorbent Capacity, Regular )	-	0	NA
Cl 5(Absorbent Capacity, Large)	-	0	NA
Cl 5(Absorbent Capacity, Extra Large)	-	0	NA
Cl 5(Absorbent Capacity, XXL)	-	0	NA
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	125	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
6.0(Manufacture, workmanship & finish)	-	400	NA
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	600	NA
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	5000	NA
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	2500	-
7.6(Pthalate test)	-	4000	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	400	NA

08 Apr, 2028

-
Cl 7.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization), Cl 7.5 (Biodegradability and Compostability (Optional)

3191

National Test House (NR) - NTH, Ghaziabad

8101304

IS 15769 (2008)

Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges.
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	5000	Complete Testing Charges.
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	5000	Complete Testing Charges.
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	5000	Complete Testing Charges.
5.6(Longitudinal Bend Test)	-	2000	Complete Testing Charges.
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	5000	Complete Testing Charges.
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	Complete Testing Charges.
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges.
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	5000	Complete Testing Charges.
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	5000	Complete Testing Charges.
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	5000	Complete Testing Charges.
5.6(Longitudinal Bend Test)	-	2000	Complete Testing Charges.
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	5000	Complete Testing Charges.
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	Complete Testing Charges.
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges.
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	5000	Complete Testing Charges.
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	5000	Complete Testing Charges.
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	5000	Complete Testing Charges.
5.6(Longitudinal Bend Test)	-	2000	Complete Testing Charges.
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	5000	Complete Testing Charges.
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	Complete Testing Charges.
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges.
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	5000	Complete Testing Charges.
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	5000	Complete Testing Charges.
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	5000	Complete Testing Charges.
5.6(Longitudinal Bend Test)	-	1000	Complete Testing Charges.
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	5000	Complete Testing Charges.
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	Complete Testing Charges.
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	1000	Complete Testing Charges
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	1000	Complete Testing Charges
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	1000	Complete Testing Charges
5.6(Longitudinal Bend Test)	-	1000	Complete Testing Charges
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	1000	Complete Testing Charges
5.8 (Table No.- 15)(Chemical Composition,%)	-	1000	Complete Testing Charges
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	1000	Complete Testing Charges
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	1000	Complete Testing Charges
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	1000	Complete Testing Charges
5.6(Longitudinal Bend Test)	-	1000	Complete Testing Charges
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	1000	Complete Testing Charges
5.8 (Table No.- 15)(Chemical Composition,%)	-	1000	Complete Testing Charges
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	5000	Complete Testing Charges
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	5000	Complete Testing Charges
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	5000	Complete Testing Charges
5.6(Longitudinal Bend Test)	-	2000	Complete Testing Charges
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	5000	Complete Testing Charges
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	Complete Testing Charges
5.2(Radiographic Soundness Test)	-	1000	Complete Testing Charges
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	5000	Complete Testing Charges
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	5000	Complete Testing Charges
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	5000	Complete Testing Charges
5.6(Longitudinal Bend Test)	-	2000	Complete Testing Charges
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	5000	Complete Testing Charges
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	Complete Testing Charges

26 Oct, 2025

-
Included w.e.f. 20.01.2025

3192

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 7404 : Part 1 (1991)

Paper covered copper conductors - Specification: Part 1 round conductors (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General test conditions )	-	500	-
5(Conductor )	-	500	-
5.1(Material )	-	500	-
5.2(Diameter )	-	2500	-
6.1(Grade of Paper)	-	500	-
7(Application of paper )	-	500	-
8(Overall diameter and increase in diameter )	-	2500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	1000	-
8.3(Measuring Equipment)	-	1500	-
8.4(Measuring Method)	-	1000	-
9(Packing and marking )	-	500	-
4(General test conditions )	-	500	-
5(Conductor )	-	500	-
5.1(Material )	-	500	-
5.2(Diameter )	-	2500	-
6.1(Grade of Paper)	-	500	-
7(Application of paper )	-	500	-
8(Overall diameter and increase in diameter )	-	2500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	1000	-
8.3(Measuring Equipment)	-	1500	-
8.4(Measuring Method)	-	1000	-
9(Packing and marking )	-	500	-

31 Dec, 2026

-
Included.w.e.f.15.01.2025

3193

The Automotive Research Association of India (ARAI), Kothrud, Pune

7106935

IS 14900 (2018)

Transparent float glass - Specification (First Revision)

25677 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(A glass shall be deemed to be manufactured using float glass technology if the tin side of the glass can be identified by the UV light test as prescribed in Annex A.)	-	0	-
Cl.4.2 ( Annexure B Table 1)(The minimum value for visual light transmission for a flat, transparent clear float glass, when measured as per Annex B, shall be as prescribed in Table 1)	-	6268	-
Cl.4.3.1 (Table 2)(Float glass thickness shall be measured with micrometer or calipers, which is graduated to 0.01 mm or with a measuring instrument having an equivalent accuracy. The tolerances on thickness shall be as specified in Table 2.)	-	6149	-
Cl.4.3.2.1(the finished pane shall not be larger than a prescribed rectangle of dimensions (W + v, L + v), or smaller than a prescribed rectangle of dimensions (W – v, L – v), where v is the maximum tolerance on nominal dimensions. The corresponding sides of the prescribed rectangles shall be parallel to each other and these rectangles shall have a common centre (see Fig.1).)	-	6013	Common Testing Charges for Clause 4.3.2 and 4.3.3
Cl.4.3.2.2(The length and width of the glass on cut sizes shall be measured with a steel scale (tape) which is graduated to 1 mm. The measurement shall be made on adjacent two sides. The tolerances on nominal dimensions length L, and width W, shall be ± 5mm.)	-	0	Common Testing Charges for Clause 4.3.2 and 4.3.3
Cl.4.3.3(The tolerances on diagonals shall be as specified in Table 3.)	-	0	Common Testing Charges for Clause 4.3.2 and 4.3.3
Cl.4.4 (Annex C Table 8)(The glass shall be viewed under the conditions of observation as described in Annex C, and the angle at which there is no optical distortion shall be noted. This angle shall not be less than the appropriate critical viewing angle (see Table 8).)	-	7247	Common Testing Charges for Clause 4.4,4.5 and 4.6
Cl.4.5.1(see Table 4(Spot faults are categorized based on their size (see Table 4). Determination of spot faults shall be done in accordance with Annex D. The maximum permissible number of the different categories of spot faults shall be as per Tables 5 and 6.)	-	0	Common Testing Charges for Clause 4.4,4.5 and 4.6
Cl.4.5.2(Annexure E)(There shall be no reams, strings and lines distinguished visually when tested in accordance with Annex E.)	-	0	Common Testing Charges for Clause 4.4,4.5 and 4.6
Cl.4.5.3(Annexure E)(There shall not be any linear/extended faults when tested in accordance with Annex E.)	-	0	Common Testing Charges for Clause 4.4,4.5 and 4.6
Cl.4.6(Fig.2)(Defects in shape such as chipping of cut side, shelling, protrusion, slicing off, corners on/off, etc as shown in Fig. 2 shall be such that the deviation from the cutting line when viewing perpendicularly to the surface of plate glass is not more than the nominal value of thickness of glass or 10 mm, whichever is smaller.)	-	0	Common Testing Charges for Clause 4.4,4.5 and 4.6
4.3.1(Thickness)	-	0	Mentioned Testing Charges for 4.3.1
4.3.1(Thickness test)	-	0	Mentioned Testing Charges for 4.3.1
4.3.1(Thickness test)	-	0	Mentioned Testing Charges for 4.3.1
Cl.4.2 ( Annexure B Table 1)(The minimum value for visual light transmission for a flat, transparent clear float glass, when measured as per Annex B, shall be as prescribed in Table 1)	-	0	-
Cl.4.3.1 (Table 2)(Float glass thickness shall be measured with micrometer or calipers, which is graduated to 0.01 mm or with a measuring instrument having an equivalent accuracy. The tolerances on thickness shall be as specified in Table 2.)	-	0	-
Cl.4.3.2.1(the finished pane shall not be larger than a prescribed rectangle of dimensions (W + v, L + v), or smaller than a prescribed rectangle of dimensions (W – v, L – v), where v is the maximum tolerance on nominal dimensions. The corresponding sides of the prescribed rectangles shall be parallel to each other and these rectangles shall have a common centre (see Fig.1).)	-	0	-
Cl.4.3.2.2(The length and width of the glass on cut sizes shall be measured with a steel scale (tape) which is graduated to 1 mm. The measurement shall be made on adjacent two sides. The tolerances on nominal dimensions length L, and width W, shall be ± 5mm.)	-	0	-
Cl.4.3.3(The tolerances on diagonals shall be as specified in Table 3.)	-	0	-
Cl.4.4 (Annex C Table 8)(The glass shall be viewed under the conditions of observation as described in Annex C, and the angle at which there is no optical distortion shall be noted. This angle shall not be less than the appropriate critical viewing angle (see Table 8).)	-	0	-
Cl.4.5.1(see Table 4(Spot faults are categorized based on their size (see Table 4). Determination of spot faults shall be done in accordance with Annex D. The maximum permissible number of the different categories of spot faults shall be as per Tables 5 and 6.)	-	0	-
Cl.4.5.2(Annexure E)(There shall be no reams, strings and lines distinguished visually when tested in accordance with Annex E.)	-	0	-
Cl.4.5.3(Annexure E)(There shall not be any linear/extended faults when tested in accordance with Annex E.)	-	0	-
Cl.4.6(Fig.2)(Defects in shape such as chipping of cut side, shelling, protrusion, slicing off, corners on/off, etc as shown in Fig. 2 shall be such that the deviation from the cutting line when viewing perpendicularly to the surface of plate glass is not more than the nominal value of thickness of glass or 10 mm, whichever is smaller.)	-	0	-
4.3.1(Thickness)	-	0	-
4.3.1(Thickness test)	-	0	-
4.3.1(Thickness test)	-	0	-
Cl 4.1(A glass shall be deemed to be manufactured using float glass technology if the tin side of the glass can be identified by the UV light test as prescribed in Annex A.)	-	0	-

11 Jan, 2028

-
Included w.e.f. 19.05.2025

3194

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

All

45000 View breakup
-

Clause No.	Exclusion	Remark
12(Charging of metal-ion batteries)	-	-
6(Classification)	-	-
5(General conditions for the tests)	-	-
11.8(Temperature rise)	-	-
11.7(Duration corresponding)	-	-
11.6(Combined appliances)	-	-
11.5(Motor-operated appliances)	-	-
11.4(Heating appliances)	-	-
8.1.5(Live parts of built-in appliances)	-	-
18(Endurance)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16(Leakage current and electric strength)	-	-
4(General requirement)	-	-
32(Radiation Toxicity and Similar Hazards)	-	-
31(Resistance to Rusting)	-	-
30.2(Needle Flame Test)	-	-
30.2(Glow Wire Test)	-	-
30.1(Ball pressure test)	-	-
29(clearance, creepage distances and solid insulation)	-	-
28(Screw test and connections)	-	-
27(Provision for earthing)	-	-
26(Terminals for external conductors)	-	-
25(Supply connection and external flexible cords)	-	-
24(Components)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical Strength)	-	-
20(Stability and mechanical hazards)	-	-
19(Abnormal Operation)	-	-
18(Endurance)	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-
16.2(Leakage Current (after Clause 15))	-	-
16.1(General)	-	-
16.0(General)	-	-
15.3(Humidity Test)	-	-
15.2(Spillage Test)	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-
15.0(Moisture resistance)	-	-
14(Transient Over Voltages)	-	-
13.3(Electric Strength at operating temperature)	-	-
13.2(Leakage current at operating temperature)	-	-
13(Leakage current and electric strength at operating temperature)	-	-
11.3(Heating)	-	-
11.2(General)	-	-
11.1(General)	-	-
10.2(Current input)	-	-
10.1(Power input)	-	-
9(Starting of motor operation test requirements and tests)	-	-
8.1.4(Protection against live parts against protective impedance)	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-
8.1.2(Protection against live parts in openings)	-	-
8.1.1(Protection against live parts in all positions)	-	-
7(Marking and instructions)	-	-
A.2(Earth continuity test)	-	-
Annex C(Ageing test on motors)	-	-
Annex D(Thermal motor protectors)	-	-
15.2(Moisture resistance)	-	-
19.17(Abnormal operation)	-	-
20.1(Stability and mechanical hazards)	-	-
21.2(Mechanical strength)	-	-
21.3(Mechanical strength)	-	-
22.5(Construction)	-	-
22.6(Construction)	-	-
22.11(Construction)	-	-
22.16(Construction)	-	-
22.32(Construction)	-	-
22.42(Construction)	-	-
23.3(Internal wiring)	-	-
25(Supply connection and external flexible cords)	-	-
25.7(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
26.5(Terminals for external conductors)	-	-
27.5(Provision for earthing)	-	-
28.1(Screws and connections)	-	-
B.22.1(Construction)	-	-
B.22.3(Construction)	-	-
B.22.4(Construction)	-	-
B.22.5(Construction)	-	-
12(Charging of metal-ion batteries)	-	-
6(Classification)	-	-
5(General conditions for the tests)	-	-
11.8(Temperature rise)	-	-
11.7(Duration corresponding)	-	-
11.6(Combined appliances)	-	-
11.5(Motor-operated appliances)	-	-
11.4(Heating appliances)	-	-
8.1.5(Live parts of built-in appliances)	-	-
18(Endurance)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16(Leakage current and electric strength)	-	-
4(General requirement)	-	-
32(Radiation Toxicity and Similar Hazards)	-	-
31(Resistance to Rusting)	-	-
30.2(Needle Flame Test)	-	-
30.2(Glow Wire Test)	-	-
30.1(Ball pressure test)	-	-
29(clearance, creepage distances and solid insulation)	-	-
28(Screw test and connections)	-	-
27(Provision for earthing)	-	-
26(Terminals for external conductors)	-	-
25(Supply connection and external flexible cords)	-	-
24(Components)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical Strength)	-	-
20(Stability and mechanical hazards)	-	-
19(Abnormal Operation)	-	-
18(Endurance)	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-
16.2(Leakage Current (after Clause 15))	-	-
16.1(General)	-	-
16.0(General)	-	-
15.3(Humidity Test)	-	-
15.2(Spillage Test)	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-
15.0(Moisture resistance)	-	-
14(Transient Over Voltages)	-	-
13.3(Electric Strength at operating temperature)	-	-
13.2(Leakage current at operating temperature)	-	-
13(Leakage current and electric strength at operating temperature)	-	-
11.3(Heating)	-	-
11.2(General)	-	-
11.1(General)	-	-
10.2(Current input)	-	-
10.1(Power input)	-	-
9(Starting of motor operation test requirements and tests)	-	-
8.1.4(Protection against live parts against protective impedance)	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-
8.1.2(Protection against live parts in openings)	-	-
8.1.1(Protection against live parts in all positions)	-	-
7(Marking and instructions)	-	-
A.2(Earth continuity test)	-	-
Annex C(Ageing test on motors)	-	-
Annex D(Thermal motor protectors)	-	-
15.2(Moisture resistance)	-	-
19.17(Abnormal operation)	-	-
20.1(Stability and mechanical hazards)	-	-
21.2(Mechanical strength)	-	-
21.3(Mechanical strength)	-	-
22.5(Construction)	-	-
22.6(Construction)	-	-
22.11(Construction)	-	-
22.16(Construction)	-	-
22.32(Construction)	-	-
22.42(Construction)	-	-
23.3(Internal wiring)	-	-
25(Supply connection and external flexible cords)	-	-
25.7(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
26.5(Terminals for external conductors)	-	-
27.5(Provision for earthing)	-	-
28.1(Screws and connections)	-	-
B.22.1(Construction)	-	-
B.22.3(Construction)	-	-
B.22.4(Construction)	-	-
B.22.5(Construction)	-	-

08 Feb, 2027

-
Included w.e.f 14.01.2025 Exclusion : Cl 19.11.4.1 - Cl 19.11.4.7

3195

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3 (Cord Beading - IS 15907)	-
5.2.1 (Thickness of coating film- method A of IS 13162 (Part 3))	-
5.2.2 (coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-
5.3.1 (Construction- IS 15907)	-
5.3.1 (Construction- IS 15907)	-
5.3.1 (Construction- IS 15907)	-
5.3.1 (The width of the hem - IS 15907)	-
5.3.2 (Finished width of pocket - IS 15907)	-
5.4 (Bonding- IS 15907)	-
6- Table 1- SL.No (i) (Mass)	-
6- Table 1- SL.No (ii) (Breaking strength before UV exposure,warp - IS 1969 )	-
6- Table 1- SL.No (ii) (Breaking strength before UV exposure,weft - IS 1969 )	-
6- Table 1- SL.No (iii) (Elongation at break of fabric- IS 1969)	-
6- Table 1- SL.No (iv) (Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-
6- Table 1- SL.No (v) (Welded seam strength before UV exposure- IS 1969)	-
6- Table 1- SL.No (vi) (Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-
6- Table 1- SL.No (vii) (Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-
6- Table 1- SL.No (vii) (Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-
6- Table 1- SL.No (viii) (Puncture strength - Annex C of IS 15907)	-
6.1 (Length -IS 15907)	-
6.1 (Width - IS 15907)	-
6.1 (Height - IS 15907)	-
4.1 (Linear Density)	-
4.1 (Width)	-

-
Except Raw material test, Colour fastness to artificial light, Bursting strength test, Environmental stress cracking test, Resistance to chemicals, change in the mass, Water Proofness and Limited test facility for UV stability test.

3196

Novateur Electrical and Digital Systems Pvt Ltd, Sinnar, Nasik

7176426

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

251000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.2.2(Glow-wire testing)	-	5000	-
7.1.4(Clearances and creepage distances)	-	10000	-
7.2.3(Dielectric properties)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	5000	-
8.2.5(Verification of actuating force (or moment))	-	5000	-
8.3.3.3(Temperature rise)	-	10000	-
8.3.3.4(Dielectric properties)	-	20000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	14000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	20000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	25000	-
J.8.3.3.3(Temp-rise tests)	-	0	Testing facility not available already mentioned in application.
J.8.3.3.4(Dielectric test)	-	0	Testing facility not available already mentioned in application.
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	0	Testing facility not available already mentioned in application.
J.8.3.3.4(Dielectric test)	-	0	Testing facility not available already mentioned in application.
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	0	Testing facility not available already mentioned in application.
J.8.3.3.3(Temp-rise tests)	-	0	Testing facility not available already mentioned in application.
7.1.2.2(Glow-wire testing)	-	5000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	20000	-
F 8.1.2.6("Dielectric test after stresses")	-	14000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	25000	-
7.2.3(Dielectric properties)	-	20000	-
8.3.3.4(Dielectric properties)	-	20000	-
8.3.3.3(Temperature rise)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	5000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	25000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	5000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	5000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	25000	-
8.3.3.5.6 b(Dielectric verification)	-	14000	-
7.1.2.2(Glow-wire testing)	-	5000	-
7.1.4(Clearances and creepage distances)	-	10000	-
7.2.3(Dielectric properties)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	5000	-
8.2.5(Verification of actuating force (or moment))	-	5000	-
8.3.3.3(Temperature rise)	-	10000	-
8.3.3.4(Dielectric properties)	-	20000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	14000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	20000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	25000	-
7.1.2.2(Glow-wire testing)	-	5000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	20000	-
F 8.1.2.6("Dielectric test after stresses")	-	14000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	25000	-
7.2.3(Dielectric properties)	-	20000	-
8.3.3.4(Dielectric properties)	-	20000	-
8.3.3.3(Temperature rise)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	5000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	25000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	5000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	5000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	25000	-
8.3.3.5.6 b(Dielectric verification)	-	14000	-

21 Feb, 2027

-
Included .w.e.f.11.02.2025 Capacity: Short Circuit Test: 63A to 50kA @415V Temperature rise test: Upto 4000A Electrical Endurance test: Upto 2500A @ 415V Mechanical Endurance test HV (Upto 15kV AC/DC) Leakage Current (Upto 300mA) Impulse (Upto 20kVp) Glow-wire test (on equipment) only for sequence IV & VI

3197

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS 12640 : Part 1 (2024)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses Rccbs: Part 1 general rules (Third Revision)

RCCB

1545000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	500 (For 1 Sample of DP), 500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
8.1.1(General)	-	500	500 (For 1 Sample of DP), 500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
8.1.2(Mechanism)	-	1500	1000 (For 1 Sample of DP), 1500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.3(Indelibility of marking)	-	1000	1000 (For 1 Sample of DP), 1000 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
8.1.3(Clearance and creepage distance (External parts only))	-	1500	1000 (For 1 Sample of DP) 1500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.15(Trip free mechanism)	-	3500	2500 (For 1 Sample of DP) 3500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.4(Reliability of screws, current-carrying parts and connections)	-	5000	3000 (For 1 Sample of DP) 5000 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.5(Reliability of terminals for external conductors)	-	5500	3500 (For 1 Sample of DP) 5500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.6(Protection againts electrci shock)	-	4000	2000 (For 1 Sample of DP) 4000 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.13(Resistance to heat)	-	2500	2000 (For 1 Sample of DP) 2500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
8.1.3(Clearance and creepage distance (Internal parts only))	-	1500	1000 (For 1 Sample of DP) 1500 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.25(Resistance to rusting)	-	3000	2000 (For 1 Sample of DP) 3000 (For 1 Sample of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.14(Resistance to abnormal heat and to fire)	-	20000	15000 (For 3 Samples of DP) 20000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	11000 (For 3 Samples of DP) 13500 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12000	10000 (For 3 Samples of DP) 12000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.1(Resistance to humidity)	-	15000	15000 (For 3 Samples of DP) 15000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.2(Insulation resistance of the main circuit)	-	7500	5000 (For 3 Samples of DP) 7500 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.3(Dielectric strength of the main circuit)	-	7500	5000 (For 3 Samples of DP) 7500 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	5000 (For 3 Samples of DP) 7500 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	11000 (For 3 Samples of DP) 13500 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.5(Secondary circuit of detection transformers)	-	11000	10000 (For 3 Samples of DP) 11000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	11000	10000 (For 3 Samples of DP) 11000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.8(Temperature-rise)	-	18000	15000 (For 3 Samples of DP) 18000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.22.2(Reliability at 40 °C)	-	38000	30000 (For 3 Samples of DP) 38000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.23(Ageing of electronic components)	-	25500	23000 (For 3 Samples of DP) 25500 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.10(Mechanical and electrical endurance)	-	120000	80000 (For 3 Samples of DP) 120000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.9(Residual operating characteristics)	-	101000	68000 (For 3 Samples of DP) 101000 (For 3 Samples of FP) - These tests charges are including 9.21 - DC component as per latest revision. Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.17(Behaviour in the case of failure of the line voltage)	-	8000	6000 (For 3 Samples of DP) 8000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.11.2.3a)b)(Perf ormance at IΔm)	-	60000	49000 (For 3 Samples of DP) 60000(For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.16(Test device)	-	3000	2000 (For 3 Samples of DP) 3000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.12(Resistance to mechanical shock and impact)	-	11000	9000 (For 3 Samples of DP) 11000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.18(Non-operating current under overcurrent conditions)	-	11000	9000 (For 3 Samples of DP) 11000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	80000	60000 (For 3 Samples of DP) 80000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.11.2.4 a)(Coordination at Inc)	-	75000	60000 (For 3 Samples of DP) 75000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.11.2.4 c)(Performance at Im)	-	75000	60000 (For 3 Samples of DP) 75000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.11.2.4 b)(Coordination at Im)	-	75000	60000 (For 3 Samples of DP) 75000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.11.2.2(Coordination at IΔc)	-	75000	60000 (For 3 Samples of DP) 75000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.22.1(Reliability (climatic test))	-	90000	90000 (For 3 Samples of DP) 90000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
IEC 61543, Table 5 –T2.3(Surges)	-	90000	60000 (For 3 Samples of DP) 90000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	60000	60000 (For 3 Samples of DP) 60000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	0	Duplicate clause
IEC 61543, Table 5 -T2.5(Radiated electromagnetic field)	-	120000	120000 (For 3 Samples of DP) 120000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
IEC 61543, Table 5 -T2.2(Fast transients (bursts))	-	90000	60000 (For 3 Samples of DP) 90000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
IEC 61543, Table 5 – T2.6(Conducted common mode disturbances in the frequency range lower than 150 kHz)	-	135000	90000 (For 3 Samples of DP) 135000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
IEC 61543, Table 6 -T3.1(Electrostatic discharges)	-	20000	20000 (For 3 Samples of DP) 20000 (For 3 Samples of FP) Total Test Charges: 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP)
9.19(Unwanted tripping Behaviour in the case of surge currents)	-	16000	12000 (For 3 Samples of DP) 16000 (For 3 Samples of FP)
9.21(DC components)	-	0	Already covered into the Cl. 9.9
6(Marking)	-	0	-
8.1.1(General)	-	0	-
8.1.2(Mechanism)	-	0	-
9.3(Indelibility of marking)	-	0	-
8.1.3(Clearance and creepage distance (External parts only))	-	0	-
9.15(Trip free mechanism)	-	0	-
9.4(Reliability of screws, current-carrying parts and connections)	-	0	-
9.5(Reliability of terminals for external conductors)	-	0	-
9.6(Protection againts electrci shock)	-	0	-
9.13(Resistance to heat)	-	0	-
8.1.3(Clearance and creepage distance (Internal parts only))	-	0	-
9.25(Resistance to rusting)	-	0	-
9.14(Resistance to abnormal heat and to fire)	-	0	-
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	0	-
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	0	-
9.7.1(Resistance to humidity)	-	0	-
9.7.2(Insulation resistance of the main circuit)	-	0	-
9.7.3(Dielectric strength of the main circuit)	-	0	-
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	0	-
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	0	-
9.7.5(Secondary circuit of detection transformers)	-	0	-
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	0	-
9.8(Temperature-rise)	-	0	-
9.22.2(Reliability at 40 °C)	-	0	-
9.23(Ageing of electronic components)	-	0	-
9.10(Mechanical and electrical endurance)	-	0	-
9.9(Residual operating characteristics)	-	0	-
9.17(Behaviour in the case of failure of the line voltage)	-	0	-
9.11.2.3a)b)(Perf ormance at IΔm)	-	0	-
9.16(Test device)	-	0	-
9.12(Resistance to mechanical shock and impact)	-	0	-
9.18(Non-operating current under overcurrent conditions)	-	0	-
9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	0	-
9.11.2.4 a)(Coordination at Inc)	-	0	-
9.11.2.4 c)(Performance at Im)	-	0	-
9.11.2.4 b)(Coordination at Im)	-	0	-
9.11.2.2(Coordination at IΔc)	-	0	-
9.22.1(Reliability (climatic test))	-	0	-
IEC 61543, Table 5 –T2.3(Surges)	-	0	-
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	0	-
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	0	-
IEC 61543, Table 5 -T2.5(Radiated electromagnetic field)	-	0	-
IEC 61543, Table 5 -T2.2(Fast transients (bursts))	-	0	-
IEC 61543, Table 5 – T2.6(Conducted common mode disturbances in the frequency range lower than 150 kHz)	-	0	-
IEC 61543, Table 6 -T3.1(Electrostatic discharges)	-	0	-
9.19(Unwanted tripping Behaviour in the case of surge currents)	-	0	-

12 May, 2027

-
Included w.e.f. 27.01.2025 Exclusion:IEC 615432 , Table 4 -T1.1 (Harmonics, inter harmonics), IEC 61543, Table 4 -T1.2 (Signalling voltages), 9.21 (DC components).

3198

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17070 (2019)

Jute agrotextiles for growth of plant and suppression of weeds – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 -Table 1 -(i) (Mass at 20 percent moisture regain)	-
5 -Table 1 -(ii) (Thickness)	-
5 -Table 1 -(iii) (Width)	-
5 -Table 1 -(iv) (Wide width tensile strength)	-
5 -Table 1 -(v) (Tear strength)	-
5 -Table 1 -(vii) (Index Puncture resistance)	-
8 (Marking)	-

-
Except Air permeability test, Bursting strength.

3199

SKC COMPLIANCE LAB PRIVATE LIMITED, MAHADEVPURA

6170406

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	10% discount for BIS
8.1.1(Protection against live parts in all positions)	-	500	10% discount for BIS
8.1.2(Protection against live parts in openings)	-	500	10% discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	250	10% discount for BIS
8.1.4(Protection against live parts against protective impedance)	-	250	10% discount for BIS
9(Starting of motor operation test requirements and tests)	-	0	10% discount for BIS
10.1(Power input)	-	2500	10% discount for BIS
10.2(Current input)	-	2500	10% discount for BIS
11.1(General)	-	500	10% discount for BIS
11.2(General)	-	500	10% discount for BIS
11.3(Heating)	-	6500	10% discount for BIS
13.1(General)	-	0	10% discount for BIS
13.2(Leakage current at operating temperature)	-	2000	10% discount for BIS
13.3(Electric Strength at operating temperature)	-	2000	10% discount for BIS
14(Transient Over Voltages)	-	1000	10% discount for BIS
15.0(General)	-	0	10% discount for BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	10% discount for BIS
15.2(Spillage Test)	-	500	10% discount for BIS
15.3(Humidity Test)	-	8000	10% discount for BIS
16.0(General)	-	0	10% discount for BIS
16.1(General)	-	0	10% discount for BIS
16.2(Leakage Current (after Clause 15))	-	2000	10% discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	10% discount for BIS
17(Over Load Protection of Transformers and associated circuits)	-	2000	10% discount for BIS
18(Endurance Test requirements and tests)	-	0	10% discount for BIS
19(Abnormal Operation)	-	10000	10% discount for BIS
20(Stability test)	-	1500	10% discount for BIS
21(Mechanical Strength Test)	-	2000	10% discount for BIS
22(Construction verification related test)	-	3000	10% discount for BIS
23(General)	-	2000	10% discount for BIS
24(Components)	-	5000	10% discount for BIS
25(Supply connection and external flexible cords)	-	1500	10% discount for BIS
26(Terminals for external conductors)	-	1500	10% discount for BIS
27(Provision for earthing)	-	3000	10% discount for BIS
28(Screw test and connections)	-	2000	10% discount for BIS
29(clearance, creepage distances and solid insulation)	-	5000	10% discount for BIS
30.1(Ball pressure test)	-	2000	10% discount for BIS
30.2(Glow Wire Test)	-	1500	10% discount for BIS
30.2(Needle Flame Test)	-	1500	10% discount for BIS
31(Resistance to Rusting)	-	1500	10% discount for BIS
32(Radiation Toxicity and Similar Hazards)	-	0	10% discount for BIS

24 May, 2028

-
EXCLUSIONS: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), 24 (Components).

3200

SKC COMPLIANCE LAB PRIVATE LIMITED, MAHADEVPURA

6170406

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	6000	10% discount for BIS
7(Heating under normal operating conditions)	-	13000	10% discount for BIS
8(Constructional requirements with regard to the protection against electric shock)	-	5000	10% discount for BIS
9(Electric shock hazard under normal operating conditions)	-	5000	10% discount for BIS
10(Insulation requirements)	-	12000	10% discount for BIS
11(Fault conditions)	-	5000	10% discount for BIS
12(Mechanical strength)	-	5000	10% discount for BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	6000	10% discount for BIS
14(Components)	-	6000	10% discount for BIS
15(TERMINALS)	-	2500	10% discount for BIS
16(External flexible cords)	-	6000	10% discount for BIS
17(Electrical connections and mechanical fixings)	-	4000	10% discount for BIS
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	10% discount for BIS
19(Stability and mechanical hazards)	-	4000	10% discount for BIS
20(Resistance to fire)	-	2500	10% discount for BIS
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	1000	10% discount for BIS
8.16(Wound Component)	-	1000	10% discount for BIS
15(Internal wires and power cords)	-	2500	10% discount for BIS
16.3b(Cord Bending Test)	-	1000	10% discount for BIS
20.2.4(Printed Boards)	-	2500	10% discount for BIS

24 May, 2028

-
Exclusions : 6.1 (Ionizing radiation),6.2 (Laser Radiation), Cl 6.3 LED , 18 (Mechanical strength of Picture tubes and protection against the effect of implosion), 14 (Components).

3201

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16202 (2014)

Agro textiles - Woven ground covers for horticulture application - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Linear Density, Denier)	-
4.2 (Plain Weave & Sett, ends & picks/dm)	-
4.3 (Colour)	-
5.1, Table-1 (Mass, g/m² , IS 1964)	-
5.1, Table-1 (Tensile Test, Kgf, IS 1969,Part-2)	-
5.1, Table-1 (Tear Strength, Kgf, IS 6489,Part-1)	-
5.1, Table-1 (Index puncture resistance, kgf, Annexure-B)	-
5.1, Table-1 (UV accelerated exposure testing, Annexure-C)	-
5.1, Table-1 (Water permeability, lt/m2 /s, IS 14324)	-
5.2 (Dimension and Mass)	-
Clause No. 7 (Packing thickness)	-

-
Except Raw material test, Air permeability test, Water vapour permeability and Limited test facility for UV stability test.

3202

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16513 (2016)

Agro textiles “ Insect nets for agriculture and horticulture purposes “ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6/6.1 ( REQUIREMENTS Dimensions and Mass a) Length)	-
6/6.1 ( REQUIREMENTS Dimensions and Mass b) width)	-
6/6.1 ( REQUIREMENTS Dimensions and Mass c) Mass gm/m2)	-
4.2 ( Netting Fabric)	-
4.2 ( Netting Fabric)	-
4.2 ( Netting Fabric)	-
5.0 (types a) Type I — having mesh of 30; b) Type II — having mesh of 40; andc) c) Type III — having mesh of 50)	-
4.3 ( Colour)	-
4.1 (Linear Density)	-
6.2/2 (Ends per Inch)	-
6.2/2 (Picks per Inch)	-
6.2/3 (cover factor)	-
6.2/4 (Breaking strength before U.V. Exposure (MD & TD))	-
6.2/5 (UV exposure 144 hours (100x65 + 44x40))	-
6.2/5 (Breaking strength after U.V. Exposure (MD & TD))	-

-
Except Raw material test, Air permeability test, Bursting strength test and Limited test facility for UV stability test.

3203

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16718 (2021)

Textiles - Polypropylene Spun Bonded Non-Woven Crop Covers and Fruit Skirting Bags for Agricultural and Horticultural Applications - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.2 (Width of fabric)	-
5.4.2 -Table 1-(i) (Mango, Orange)	-
5.4.2 -Table 1-(ii) (Banana bunch)	-
5.4.2 -Table 1-(iii) (Grape bunch)	-
5.4.2 -Table 1-(iv) (Pomegranate)	-
5.4.2 -Table 1-(v) (Papaya)	-
5.4.2 - Table 2 - (i) (Thickness)	-
5.4.2 - Table 2 - (ii) (Fabric mass)	-
5.4.2 - Table 2 - (iii) (Breaking strength)	-
5.4.2 - Table 2 - (iv) (Elongation at break)	-
5.4.2 - Table 2 - (v) (Trapezoid tear strength)	-
5.4.2 - Table 2 - (viii) (UV stability test)	-
5.4.2 - Table 2 - (ix) (Ash content)	-
5.4.2 - Table 2 - (x) (Index puncture resistance)	-
5.4.2 - Table 2 - (xii) (Colour)	-
8.1.2 (Marking)	-

-
Except Raw material test, Air permeability test, Water vapour permeability test, Water absorption capacity test and Limited test facility for UV stability test.

3204

Stellar Test House, Noida

8171606

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1500	-
6(Classification)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32(Radiation Toxicity and Similar Hazards)	-	400	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	100	-
23(Internal wiring)	-	400	-
22(Construction)	-	500	-
21(Mechanical Strength)	-	100	-
20(Stability and mechanical hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	100	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	100	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	100	-
10.1(Power input)	-	100	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	100	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	100	-
8.1.2(Protection against live parts in openings)	-	100	-
8.1.1(Protection against live parts in all positions)	-	100	-
7(Marking and instructions)	-	100	-
A.2(Earth continuity test)	-	100	-
Annex C(Ageing test on motors)	-	100	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	100	-
19.17(Abnormal operation)	-	100	-
20.1(Stability and mechanical hazards)	-	100	-
21.2(Mechanical strength)	-	100	-
21.3(Mechanical strength)	-	100	-
22.5(Construction)	-	100	-
22.6(Construction)	-	100	-
22.11(Construction)	-	100	-
22.16(Construction)	-	100	-
22.32(Construction)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal wiring)	-	100	-
25(Supply connection and external flexible cords)	-	100	-
25.7(Supply connection and external flexible cords)	-	100	-
25.14(Supply connection and external flexible cords)	-	100	-
25.15(Supply connection and external flexible cords)	-	100	-
26.5(Terminals for external conductors)	-	100	-
27.5(Provision for earthing)	-	100	-
28.1(Screws and connections)	-	100	-
B.22.1(Construction)	-	100	-
B.22.3(Construction)	-	100	-
B.22.4(Construction)	-	100	-
B.22.5(Construction)	-	200	-
12(Charging of metal-ion batteries)	-	1500	-
6(Classification)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	200	-
4(General requirement)	-	100	-
32(Radiation Toxicity and Similar Hazards)	-	200	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	400	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	200	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	200	-
23(Internal wiring)	-	500	-
22(Construction)	-	200	-
21(Mechanical Strength)	-	700	-
20(Stability and mechanical hazards)	-	400	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	200	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	200	-
15.0(Moisture resistance)	-	500	-
14(Transient Over Voltages)	-	100	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	1000	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	500	-
10.1(Power input)	-	500	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	200	-
A.2(Earth continuity test)	-	400	-
Annex C(Ageing test on motors)	-	200	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	500	-
21.2(Mechanical strength)	-	200	-
21.3(Mechanical strength)	-	200	-
22.5(Construction)	-	100	-
22.6(Construction)	-	100	-
22.11(Construction)	-	200	-
22.16(Construction)	-	100	-
22.32(Construction)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal wiring)	-	100	-
25(Supply connection and external flexible cords)	-	100	-
25.7(Supply connection and external flexible cords)	-	500	-
25.14(Supply connection and external flexible cords)	-	100	-
25.15(Supply connection and external flexible cords)	-	100	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for earthing)	-	500	-
28.1(Screws and connections)	-	400	-
B.22.1(Construction)	-	200	-
B.22.3(Construction)	-	200	-
B.22.4(Construction)	-	100	-
B.22.5(Construction)	-	100	-

26 Sep, 2028

-
Included w.e.f 25.03.2025 Exclusion: Cl 19.11.4.1 to Cl 19.11.4.1(EMI/EMC)

3205

TUV India Private Limited (7133816), Pune

7133816

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	25	Individual Testing Charges
Cl-5.3, Table-1 (ii)(Odour)	-	25	Individual Testing Charges
Cl-5.3, Table-1 (iii)(Taste)	-	25	Individual Testing Charges
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	25	Individual Testing Charges
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	50	Individual Testing Charges
Cl-5.3, Table-1 (vi)(pH)	-	50	Individual Testing Charges
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	150	Individual Testing Charges
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	150	Individual Testing Charges
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	200	Individual Testing Charges
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	Individual Testing Charges
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	150	Individual Testing Charges
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	150	Individual Testing Charges
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	150	Individual Testing Charges
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	100	Individual Testing Charges
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	250	Individual Testing Charges
Cl-5.3, Table-2 (xx)(Mineral oil)	-	250	Individual Testing Charges
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	150	Individual Testing Charges
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	Individual Testing Charges
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	150	Individual Testing Charges
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	200	Individual Testing Charges
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	250	Individual Testing Charges
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	Individual Testing Charges
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	Individual Testing Charges
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	150	Individual Testing Charges
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	Individual Testing Charges
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	150	Individual Testing Charges
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	Individual Testing Charges
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	150	Individual Testing Charges
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	250	Individual Testing Charges
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	250	Individual Testing Charges
5.4/Annex D/i(O,P-DDT)	-	2500	Packaged Charges
5.4/Annex D/i(P,P-DDT)	-	2500	Packaged Charges
5.4/Annex D/i(O,P-DDE)	-	2500	Packaged Charges
5.4/Annex D/i(P,P-DDE)	-	2500	Packaged Charges
5.4/Annex D/i(O,P-DDD)	-	2500	Packaged Charges
5.4/Annex D/i(P,P-DDD)	-	2500	Packaged Charges
5.4/Annex D/ii(Lindane)	-	2500	Packaged Charges
5.4/Annex D/iii(a-HCH)	-	2500	Packaged Charges
5.4/Annex D/iii(β- HCH)	-	2500	Packaged Charges
5.4/Annex D/iii(d-HCH)	-	2500	Packaged Charges
5.4/Annex D/iv(a-Endosulfan)	-	2500	Packaged Charges
5.4/Annex D/iv(b-Endosulfan)	-	2500	Packaged Charges
5.4/Annex D/iv(Endosulfan sulfate)	-	2500	Packaged Charges
5.4/Annex D/v(Monochrotophos)	-	2500	Packaged Charges
5.4/Annex D/vi(Ethion)	-	2500	Packaged Charges
5.4/Annex D/vii(Chlorpyrifos)	-	2500	Packaged Charges
5.4/Annex D/viii(Phorate)	-	2500	Packaged Charges
5.4/Annex D/viii(Phorate sulphoxide)	-	2500	Packaged Charges
5.4/Annex D/viii(Phorate sulfone)	-	2500	Packaged Charges
5.4/Annex D/ix(2,4 –D)	-	2500	Packaged Charges
5.4/Annex D/x(Butachlor)	-	2500	Packaged Charges
5.4/Annex D/xi(Isoproturon)	-	2500	Packaged Charges
5.4/Annex D/xii(Alachlor)	-	2500	Packaged Charges
5.4/Annex D/xiii(Atrazine)	-	2500	Packaged Charges
5.4/Annex D/xiv(Methyl parathion)	-	2500	Packaged Charges
5.4/Annex D/xxvii(Methyl paraoxon)	-	2500	Packaged Charges
5.4/Annex D/xv(Malathion)	-	2500	Packaged Charges
5.4/Annex D/xxviii(Malaoxon)	-	2500	Packaged Charges
5.4 i)(Aldrin)	-	2500	Packaged Charges
5.4/Annex D/xvi(Dieldrin)	-	2500	Packaged Charges
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	250	Individual Testing Charges
Cl-5.2.2(Coliform)	-	250	Individual Testing Charges
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	350	Individual Testing Charges
Cl-5.2.5(Pseudomonas Aeruginosa)	-	350	Individual Testing Charges
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	300	Individual Testing Charges
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	350	Individual Testing Charges
Cl-5.2.7(Yeast and mould)	-	350	Individual Testing Charges
Cl-5.2.8(Salmonella)	-	350	Individual Testing Charges
Cl-5.2.8(shigella)	-	350	Individual Testing Charges
Cl-5.2.9(Vibrio cholera)	-	350	Individual Testing Charges
Cl-5.2.9(V.parahaemolyticus)	-	350	Individual Testing Charges
Cl-5.2.3(Faecal streptococci)	-	350	Individual Testing Charges
Cl-5.2.3(Staphylococcus aureus)	-	350	Individual Testing Charges
Table 3, x)(Uranium)	-	200	Individual Testing Charges
5.4 i)(Dieldrin)	-	0	Double Entry
5.4 i)(Malathion)	-	0	Double Entry
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	Double Entry
5.4 i)(Methyl Paraoxon)	-	0	Double Entry
5.4 i)(Methyl Parathion)	-	0	Double Entry
5.4 i)(Atrazine)	-	0	Double Entry
5.4 i)(Alachlor)	-	0	Double Entry
5.4 i)(Isoproturon)	-	0	Double Entry
5.4 i)(Butachlor)	-	0	Double Entry
5.4 i)(2,4-D)	-	0	Double Entry
5.4 i)(Phorate sulphone)	-	0	Double Entry
5.4 i)(Phorate sulphoxide)	-	0	Double Entry
5.4 i)(Phorate)	-	0	Double Entry
5.4 i)(Chlorpyrifos)	-	0	Double Entry
5.4 i)(Ethion)	-	0	Double Entry
5.4 i)(Monocrotophos)	-	0	Double Entry
5.4 i)(Endosulfan Sulphate)	-	0	Double Entry
5.4 i)(beta-Endosulfan)	-	0	Double Entry
5.4 i)(alpha-Endosulfan)	-	0	Double Entry
5.4 i)(Delta-HCH)	-	0	Double Entry
5.4 i)(beta-HCH)	-	0	Double Entry
5.4 i)(alpha-HCH)	-	0	Double Entry
5.4 i)(Gamma-HCH (Lindane))	-	0	Double Entry
5.4 i)(p,p DDD)	-	0	Double Entry
5.4 i)(o,p DDD)	-	0	Double Entry
5.4 i)(p,p DDE)	-	0	Double Entry
5.4, i)(o,p DDE)	-	0	Double Entry
5.4 i)(p,p DDT)	-	0	Double Entry
5.4 i)(o,p DDT)	-	0	Double Entry
5.3(Appearance)	-	0	Double Entry
Cl-5.1(General Requirements)	-	0	Double Entry
Cl-5.3, Table-3 (x)(Uranium)	-	0	Double Entry
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	Double Entry
Cl-5.4 (ii)(Total pesticide residue)	-	0	Double Entry
5.4/Annex D/xvi(Aldrin)	-	0	Double Entry
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Table 3, x)(Uranium)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
5.3(Appearance)	-	0	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Table 3, x)(Uranium)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
5.3(Appearance)	-	0	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
5.4 i)(Aldrin)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
Table 3, x)(Uranium)	-	-	-
5.4 i)(Dieldrin)	-	-	-
5.4 i)(Malathion)	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Atrazine)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(2,4-D)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(Phorate sulphoxide)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(Delta-HCH)	-	-	-
5.4 i)(beta-HCH)	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(p,p DDE)	-	-	-
5.4, i)(o,p DDE)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4 i)(o,p DDT)	-	-	-
5.3(Appearance)	-	-	-
Cl-5.1(General Requirements)	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
5.3/Table 2/xiii(Suphate)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-

08 May, 2028

-
Included w.e.f.13.05.2025 Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

3206

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M 30, M 35, M 40, M 50, M 55

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	9000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	9000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	9000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	9000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	9000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	9000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	9000	-
Clause 7.3, Annex G(Average Breaking Load)	-	2500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	2500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1250	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1250	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	500	-
Clause 7.1.3 (Colour and Texture)	-	500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	100	-
Clause 7.1.1 (General Quality)	-	100	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	-
Clause 3.20(Spacer nibs)	-	0	Exclusion
10(Marking)	-	0	Exclusion
cl.5(Cement)	-	0	Exclusion
5.2(Mineral Admixture)	-	0	Exclusion
5.3(Chemical Admixtures)	-	0	Exclusion
5.4(Coarse and Fine Aggregates)	-	0	Exclusion
5.5(Pigments)	-	0	Exclusion
5.6(Water)	-	0	Exclusion
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	2500	-
Clause 7.3, Annex G(Average Breaking Load)	-	2500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	2500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	250	-
Clause 7.1.3 (Colour and Texture)	-	100	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	500	-
Clause 7.1.1 (General Quality)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	2500	-
Clause 7.3, Annex G(Average Breaking Load)	-	2500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	2500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	100	-
Clause 7.1.3 (Colour and Texture)	-	100	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	100	-
Clause 7.1.1 (General Quality)	-	100	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	-

31 Dec, 2026

-
Included w.e.f.28.07.2025 exclusion (Raw Material)

3207

Testtex India Laboratories Pvt. Ltd., Mumbai

7126506

IS 17514 (2021)

Reusable Sanitary PadSanitary Napkin Period panties Specification

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material- Cover/Top sheet)	-	500	Complete Test Charges - Rs 17,000 + GST [Including Cl.9.5-Phthalates];Cl.10.0 - Anti Bacterial Activity Value (Optional Test) - Rs 4000 + GST (10% Discount to BIS for Complete Testing)
3.2(Material- Absorbent Core)	-	500	-
3.3(Material- Bottom Layer)	-	200	-
4.0(Manufacturing , workmanship and finish)	-	400	-
5.0(Fastening Mechanism)	-	200	-
6.0(Sizes:- Pad Length and Pad Width (For Absorbent core only))	-	125	-
7.0(Washing , Drying And Handling Instruction)	-	200	-
8 & 11.2.4, Table 1, (i)(Colour Fastness to Rubbing)	-	300	-
8 & 11.2.4, Table 1, (ii)(Colour Fastness to Perspiration (Acidic & Alkaline))	-	400	-
8 & 11.2.4, Table 1, (iii)(Colour Fastness to Washing)	-	400	-
8 & 11.2.4, Table 1, (iv)(Dimensional Stability to washing, percentage)	-	400	-
9.1(pH Value)	-	400	-
9.5(Phthalate Test: Di-n-butyl phthalate (DBP))	-	4000	Rs. 4000 - Combined Testing Charges for Clause no. 9.5 Phthalate Test
9.5(Phthalate Test: Benzyl butyl phthalate (BBP))	-	4000	Rs. 4000 - Combined Testing Charges for Clause no. 9.5 Phthalate Test
9.5(Phthalate Test: Bis- (2-ethylhexyl) phthalate (DEHP))	-	4000	Rs. 4000 - Combined Testing Charges for Clause no. 9.5 Phthalate Test
9.5(Phthalate Test: di-n-octyl phtahlate (DNOP))	-	4000	Rs. 4000 - Combined Testing Charges for Clause no. 9.5 Phthalate Test
9.5(Phthalate Test: Di-iso-nonyl phthalate (DINP))	-	4000	Rs. 4000 - Combined Testing Charges for Clause no. 9.5 Phthalate Test
9.5(Phthalate Test: Di-iso-decyl phthalate (DIDP))	-	4000	Rs. 4000 - Combined Testing Charges for Clause no. 9.5 Phthalate Test
9.3.1(Bacterial and Fungal Bioburden)	-	5000	-
9.3.2(Test for Common Skin Pathogen -Staphylococcus Aureus)	-	2500	-
Clasue No. 10(Anti-Bacterial Activity Value)	-	4000	Optional Test

08 Apr, 2028

-
-

3208

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

43500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	5000	-
6(Classification)	-	500	-
5(General conditions for the tests)	-	1000	-
19.11.4.7(Harmonics)	-	25000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	-
19.11.4.5(Immunity to conducted discharges)	-	25000	-
19.11.4.4(Surge immunity test)	-	25000	-
19.11.4.3(Fast transient bursts)	-	25000	-
19.11.4.2(Radiated fields)	-	25000	-
19.11.4.1(Electrostatic discharges)	-	25000	-
11.8(Temperature rise)	-	10000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	25000	-
11.5(Motor-operated appliances)	-	25000	-
11.4(Heating appliances)	-	12000	-
8.1.5(Live parts of built-in appliances)	-	5000	-
18(Endurance)	-	15000	-
17(Overload protection of transformers and associated circuits)	-	7500	-
16(Leakage current and electric strength)	-	5000	-
4(General requirement)	-	5000	-
32(Radiation Toxicity and Similar Hazards)	-	10000	-
31(Resistance to Rusting)	-	10000	-
30.2(Needle Flame Test)	-	5000	-
30.2(Glow Wire Test)	-	5000	-
30.1(Ball pressure test)	-	5000	-
29(clearance, creepage distances and solid insulation)	-	5000	-
28(Screw test and connections)	-	5000	-
27(Provision for earthing)	-	5000	-
26(Terminals for external conductors)	-	5000	-
25(Supply connection and external flexible cords)	-	5000	-
24(Components)	-	5000	-
23(Internal wiring)	-	1200	-
22(Construction)	-	5000	-
21(Mechanical Strength)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
19(Abnormal Operation)	-	2500	-
18(Endurance)	-	5000	-
17(Over Load Protection of Transformers and associated circuits)	-	5000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	5000	-
16.2(Leakage Current (after Clause 15))	-	1500	-
16.1(General)	-	1500	-
16.0(General)	-	1500	-
15.3(Humidity Test)	-	5000	-
15.2(Spillage Test)	-	1500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	-
15.0(Moisture resistance)	-	1500	-
14(Transient Over Voltages)	-	1500	-
13.3(Electric Strength at operating temperature)	-	1500	-
13.2(Leakage current at operating temperature)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1500	-
11.3(Heating)	-	5000	-
11.2(General)	-	1500	-
11.1(General)	-	1500	-
10.2(Current input)	-	1500	-
10.1(Power input)	-	1500	-
9(Starting of motor operation test requirements and tests)	-	1500	-
8.1.4(Protection against live parts against protective impedance)	-	1500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1500	-
8.1.2(Protection against live parts in openings)	-	1500	-
8.1.1(Protection against live parts in all positions)	-	1500	-
7(Marking and instructions)	-	1500	-
A.2(Earth continuity test)	-	1500	-
Annex C(Ageing test on motors)	-	1500	-
Annex D(Thermal motor protectors)	-	1500	-
15.2(Moisture resistance)	-	1500	-
19.17(Abnormal operation)	-	1500	-
20.1(Stability and mechanical hazards)	-	1500	-
21.2(Mechanical strength)	-	1500	-
21.3(Mechanical strength)	-	1500	-
22.5(Construction)	-	1500	-
22.6(Construction)	-	1500	-
22.11(Construction)	-	1500	-
22.16(Construction)	-	1500	-
22.32(Construction)	-	1500	-
22.42(Construction)	-	1500	-
23.3(Internal wiring)	-	1500	-
25(Supply connection and external flexible cords)	-	1500	-
25.7(Supply connection and external flexible cords)	-	1500	-
25.14(Supply connection and external flexible cords)	-	1500	-
25.15(Supply connection and external flexible cords)	-	1500	-
26.5(Terminals for external conductors)	-	1500	-
27.5(Provision for earthing)	-	1500	-
28.1(Screws and connections)	-	1500	-
B.22.1(Construction)	-	1500	-
B.22.3(Construction)	-	1500	-
B.22.4(Construction)	-	1500	-
B.22.5(Construction)	-	1500	-
12(Charging of metal-ion batteries)	-	-	-
6(Classification)	-	-	-
5(General conditions for the tests)	-	-	-
19.11.4.7(Harmonics)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.5(Immunity to conducted discharges)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.2(Radiated fields)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
32(Radiation Toxicity and Similar Hazards)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27(Provision for earthing)	-	-	-
26(Terminals for external conductors)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
24(Components)	-	-	-
23(Internal wiring)	-	-	-
22(Construction)	-	-	-
21(Mechanical Strength)	-	-	-
20(Stability and mechanical hazards)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.2(Spillage Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
15.2(Moisture resistance)	-	-	-
19.17(Abnormal operation)	-	-	-
20.1(Stability and mechanical hazards)	-	-	-
21.2(Mechanical strength)	-	-	-
21.3(Mechanical strength)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction)	-	-	-
22.11(Construction)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal wiring)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
25.7(Supply connection and external flexible cords)	-	-	-
25.14(Supply connection and external flexible cords)	-	-	-
25.15(Supply connection and external flexible cords)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for earthing)	-	-	-
28.1(Screws and connections)	-	-	-
B.22.1(Construction)	-	-	-
B.22.3(Construction)	-	-	-
B.22.4(Construction)	-	-	-
B.22.5(Construction)	-	-	-

14 Nov, 2027

-
Included.w.e.f.16.01.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

3209

SHRI BAJRANG TESTING LABS, GREATER NOIDA

8183006

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

All

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	500	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	300	-
11.1(Dimensions - Width)	-	200	-
11.1(Dimensions - Thickness)	-	200	-
11.1(Dimensions - Variation in thickness)	-	500	-
11.1(Dimensions - Squareness)	-	300	-
11.12(End immersion test)	-	2000	-
11.13(Knife Test)	-	2000	-
11.14(Glue Adhesion Test)	-	2500	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	500	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	1500	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	1500	-
11.4(Impact Indentation Test)	-	2000	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	2000	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	1500	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	2500	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	2000	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	1500	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	2500	-
11.11(Varying Humidity Test)	-	2500	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	1500	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	400	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	1500	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	0	-
11.1(Dimensions - Width)	-	0	-
11.1(Dimensions - Thickness)	-	0	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	0	-
11.12(End immersion test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	0	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	0	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	0	-
11.1(Dimensions - Width)	-	0	-
11.1(Dimensions - Thickness)	-	0	-
11.1(Dimensions - Variation in thickness)	-	0	-
11.1(Dimensions - Squareness)	-	0	-
11.12(End immersion test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	0	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	0	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.8(Buckling Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

01 Dec, 2027

-
Included w.e.f 20.03.2025 Size restricted upto 2100 mm

3210

DELHI TEST HOUSE, Azadhpur

8131406

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
9.3(Guided bend test(For SAW Pipes))	-	2500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
11.1, Table 5.(Outside Diameter (OD))	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
11.1, Table 5.(Thickness)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
11.1, Table 5.(Mass)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
14.1(Visual inspection, Appearance and Workmanship)	-	250	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	250	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	250	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
8.1(CE)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
9.3(Guided Bend Test (for SAW Pipes))	-	2500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
9.2.3(Flattening Test for seamless pipes)	-	1500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
9.2.1(Flattening test for ERW pipes )	-	1500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
9.1(Tensile test-Yield Strength)	-	1500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
9.1(Tensile test-Strength)	-	1500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
9.1(Tensile test- Elongation)	-	1500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM
8.1(CE)	-	500	Rs. 15500/- FOR SIZE 168.3 - 508 MM Rs. 35000/- FOR SIZE 508-2540 MM

17 Jun, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number