BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15632 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3151

CIMEC Infralabs Private Limited

8195606

IS 15834 (2008)

Stainless Steel Sliding Door Bolts For Use With Padlocks -specification

Size: 150 mm to 450 mm

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	750	NIL
Clause 4.2(Silicon)	-	750	NIL
Clause 4.2(Manganese)	-	750	NIL
Clause 4.2(nickel)	-	750	NIL
Clause 4.2(Chromium)	-	750	NIL
Clause 4.2(Sulphur)	-	750	NIL
Clause 4.2(Phosphorus)	-	750	NIL
8(Marking)	-	500	NIL

14 Jan, 2029

-
-

3152

CIMEC Infralabs Private Limited

8195606

IS 12817 (2013)

Stainless steel butt hinges - Specification (Second Revision)

Size: 50 mm to 150 mm

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2, Table 1 to 6(Length , A -IS 12817)	-	300	NIL
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	300	NIL
6.2, Table 1 to 6(Breadth, B1-IS 12817)	-	300	NIL
6.2, Table 1 to 6(Breadth, B2-IS 12817)	-	300	NIL
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	300	NIL
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	300	NIL
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	300	NIL
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	300	NIL
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	300	NIL
7.1(General - IS 12817 )	-	250	NIL
7.2(Knuckles - IS 12817 )	-	250	NIL
7.3(Pins- IS 12817 )	-	250	NIL
7.4(Screw Holes- IS 12817 )	-	300	NIL
7.4.2(Position of screw holes - IS 12817 )	-	400	NIL
7.4.2, Fig 1(The distance of the screw holes from the end of the flap - IS 12817 )	-	400	NIL
8(Finish - IS 12817 )	-	500	NIL

14 Jan, 2029

-
-

3153

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	500	-
4.1.1(General - IS 4246 : 2025)	-	500	-
5(Materials - Cl. 5 of IS 5116)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.2(Burners)	-	500	-
11.3(Burners)	-	500	-
11.4(Burners)	-	500	-
12.1(Burner Pan Support)	-	500	-
12.2(Burner Pan Support)	-	500	-
12.3(Burner Pan Support)	-	500	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	500	-
13,2(Gas Soundness Test)	-	500	-
13.2(Gas Leak Detector)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.3(Gas Inlet Connection)	-	500	-
14.4(Gas Inlet Connection)	-	500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	500	-
14.6(Gas Inlet Connection)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.0(Gas Consumption Test)	-	500	-
17.2(Gas Consumption Test - For Gas Stoves)	-	500	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	500	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	500	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	500	-
18.1(Ignition and Flame Travel)	-	500	-
18.1(Ignition and Flame Travel)	-	500	-
18.2(Ignition and Flame Travel)	-	500	-
18.3(Ignition and Flame Travel)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
19.1(Flame Stability)	-	500	-
19.1.1(Flame Stability)	-	500	-
19.2(Flame Stability)	-	500	-
19.3(Flame Stability)	-	500	-
20(Noise Control)	-	1000	-
21(Flash Back)	-	1000	-
22(Formation of Soot)	-	1000	-
23(Resistance to Draught)	-	500	-
24.1(Combustion)	-	500	-
24.1(Combustion)	-	500	-
24.2(Combustion)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.2(Fire Hazard and Limiting Temperatures)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.1(Thermal Efficiency- Gas Stoves)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	500	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	500	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	500	-
17.3(Gas Consumption Test - For Built in Hobs)	-	500	-
4.1(General - IS 4246 : 2025)	-	1000	-
4.1(General - IS 4246 : 2025)	-	1000	-
4.1.1(General - IS 4246 : 2025)	-	1000	-
5(Materials - Cl. 5 of IS 5116)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1(Materials - IS 5116)	-	1000	-
5.1(Materials - IS 5116)	-	1000	-
5.1.1(Materials - IS 5116)	-	1000	-
5.1.1(Materials - IS 5116)	-	1000	-
5.2(Materials - IS 5116)	-	1000	-
5.2(Materials - IS 5116)	-	1000	-
5.3(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.7(Materials - IS 5116)	-	1000	-
6.1(Design for Maintainance)	-	1000	-
6.1(Design for Maintainance)	-	1000	-
6.2(Design for Maintainance)	-	1000	-
6.2(Design for Maintainance)	-	1000	-
6.3(Design for Maintainance)	-	1000	-
6.4(Design for Maintainance)	-	1000	-
6.5(Design for Maintainance)	-	1000	-
6.6(Design for Maintainance)	-	1000	-
7.0(Rigidity and Stability)	-	1000	-
7.1(Rigidity and Stability)	-	1000	-
7.2(Rigidity and Stability)	-	1000	-
7.3(Rigidity and Stability)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.2(Workmanship and Finish -)	-	1000	-
8.3(Workmanship and Finish -)	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.2(Burners)	-	1000	-
11.3(Burners)	-	1000	-
11.4(Burners)	-	1000	-
12.1(Burner Pan Support)	-	1000	-
12.2(Burner Pan Support)	-	1000	-
12.3(Burner Pan Support)	-	1000	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	1000	-
13,2(Gas Soundness Test)	-	1000	-
13.2(Gas Leak Detector)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.3(Gas Inlet Connection)	-	1000	-
14.4(Gas Inlet Connection)	-	1000	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	1000	-
14.6(Gas Inlet Connection)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.2(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	1000	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	1000	-
18.1(Ignition and Flame Travel)	-	1000	-
18.1(Ignition and Flame Travel)	-	1000	-
18.2(Ignition and Flame Travel)	-	1000	-
18.3(Ignition and Flame Travel)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
19.1(Flame Stability)	-	1000	-
19.1.1(Flame Stability)	-	1000	-
19.2(Flame Stability)	-	1000	-
19.3(Flame Stability)	-	1000	-
20(Noise Control)	-	1000	-
21(Flash Back)	-	1000	-
22(Formation of Soot)	-	1000	-
23(Resistance to Draught)	-	1000	-
24.1(Combustion)	-	1000	-
24.1(Combustion)	-	1000	-
24.2(Combustion)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.2(Fire Hazard and Limiting Temperatures)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.3(Gas Consumption Test - For Built in Hobs)	-	1000	-
4.1(General - IS 4246 : 2025)	-	1000	-
4.1(General - IS 4246 : 2025)	-	1000	-
4.1.1(General - IS 4246 : 2025)	-	1000	-
5(Materials - Cl. 5 of IS 5116)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1(Materials - IS 5116)	-	1000	-
5.1(Materials - IS 5116)	-	1000	-
5.1.1(Materials - IS 5116)	-	1000	-
5.1.1(Materials - IS 5116)	-	1000	-
5.2(Materials - IS 5116)	-	1000	-
5.2(Materials - IS 5116)	-	1000	-
5.3(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.7(Materials - IS 5116)	-	1000	-
6.1(Design for Maintainance)	-	1000	-
6.1(Design for Maintainance)	-	1000	-
6.2(Design for Maintainance)	-	1000	-
6.2(Design for Maintainance)	-	1000	-
6.3(Design for Maintainance)	-	1000	-
6.4(Design for Maintainance)	-	1000	-
6.5(Design for Maintainance)	-	1000	-
6.6(Design for Maintainance)	-	1000	-
7.0(Rigidity and Stability)	-	1000	-
7.1(Rigidity and Stability)	-	1000	-
7.2(Rigidity and Stability)	-	1000	-
7.3(Rigidity and Stability)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.2(Workmanship and Finish -)	-	1000	-
8.3(Workmanship and Finish -)	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	1000	-
11.2(Burners)	-	1000	-
11.3(Burners)	-	1000	-
11.4(Burners)	-	1000	-
12.1(Burner Pan Support)	-	1000	-
12.2(Burner Pan Support)	-	1000	-
12.3(Burner Pan Support)	-	1000	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	1000	-
13,2(Gas Soundness Test)	-	1000	-
13.2(Gas Leak Detector)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.3(Gas Inlet Connection)	-	1000	-
14.4(Gas Inlet Connection)	-	1000	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	1000	-
14.6(Gas Inlet Connection)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.0(Gas Consumption Test)	-	1000	-
17.2(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	1000	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	1000	-
18.1(Ignition and Flame Travel)	-	1000	-
18.1(Ignition and Flame Travel)	-	1000	-
18.2(Ignition and Flame Travel)	-	1000	-
18.3(Ignition and Flame Travel)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
19.1(Flame Stability)	-	1000	-
19.1.1(Flame Stability)	-	1000	-
19.2(Flame Stability)	-	1000	-
19.3(Flame Stability)	-	1000	-
20(Noise Control)	-	1000	-
21(Flash Back)	-	1000	-
22(Formation of Soot)	-	1000	-
23(Resistance to Draught)	-	1000	-
24.1(Combustion)	-	1000	-
24.1(Combustion)	-	1000	-
24.2(Combustion)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	1000	-
25.2(Fire Hazard and Limiting Temperatures)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.1(Thermal Efficiency- Gas Stoves)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	1000	-
17.3(Gas Consumption Test - For Built in Hobs)	-	1000	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1.1(General - IS 4246 : 2025)	-	-	-
5(Materials - Cl. 5 of IS 5116)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.3(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.7(Materials - IS 5116)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.3(Design for Maintainance)	-	-	-
6.4(Design for Maintainance)	-	-	-
6.5(Design for Maintainance)	-	-	-
6.6(Design for Maintainance)	-	-	-
7.0(Rigidity and Stability)	-	-	-
7.1(Rigidity and Stability)	-	-	-
7.2(Rigidity and Stability)	-	-	-
7.3(Rigidity and Stability)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.2(Workmanship and Finish -)	-	-	-
8.3(Workmanship and Finish -)	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.2(Burners)	-	-	-
11.3(Burners)	-	-	-
11.4(Burners)	-	-	-
12.1(Burner Pan Support)	-	-	-
12.2(Burner Pan Support)	-	-	-
12.3(Burner Pan Support)	-	-	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	-	-
13,2(Gas Soundness Test)	-	-	-
13.2(Gas Leak Detector)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.3(Gas Inlet Connection)	-	-	-
14.4(Gas Inlet Connection)	-	-	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	-	-
14.6(Gas Inlet Connection)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.2(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	-	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.2(Ignition and Flame Travel)	-	-	-
18.3(Ignition and Flame Travel)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
19.1(Flame Stability)	-	-	-
19.1.1(Flame Stability)	-	-	-
19.2(Flame Stability)	-	-	-
19.3(Flame Stability)	-	-	-
20(Noise Control)	-	-	-
21(Flash Back)	-	-	-
22(Formation of Soot)	-	-	-
23(Resistance to Draught)	-	-	-
24.1(Combustion)	-	-	-
24.1(Combustion)	-	-	-
24.2(Combustion)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.2(Fire Hazard and Limiting Temperatures)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.3(Gas Consumption Test - For Built in Hobs)	-	-	-

-
Included w.e.f 08.12.2025

3154

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	45000	For complete testing
Cl-4.3.1(Size)	-	45000	For complete testing
Cl-4.3.2(Weight)	-	45000	For complete testing
Cl-4.4(Height of Upper)	-	45000	For complete testing
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	45000	For complete testing
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	45000	For complete testing
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	45000	For complete testing
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	45000	For complete testing
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	45000	For complete testing
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	45000	For complete testing
Cl-4.6.1(Material)	-	45000	For complete testing
Cl-4.6.2(Tear Strength)	-	45000	For complete testing
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	45000	For complete testing
Cl-4.6.4(Water Penetration and Water Absorption)	-	45000	For complete testing
Cl-4.7.1(Material)	-	45000	For complete testing
Cl-4.7.2(Tear Strength)	-	45000	For complete testing
Cl-4.7.3(Abrasion Resistance)	-	45000	For complete testing
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	45000	For complete testing
Cl. 4.8.1(Material)	-	0	For complete testing All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-4.8.2(Abrasion Resistance)	-	45000	For complete testing
Cl-4.8.3(Water Absorption and Desorption)	-	45000	For complete testing
Cl-4.9.3(Abrasion Resistance)	-	45000	For complete testing
Cl-4.10(Toe Puff and Counter Stiffener)	-	45000	For complete testing
Cl-4.11.1(Material)	-	45000	For complete testing
Cl-4.11.2(Tear Strength)	-	45000	For complete testing
Cl-4.12(Closing Thread)	-	45000	For complete testing
Cl-4.13.2(Thickness)	-	45000	For complete testing
Cl-4.13.3(Moulded Density)	-	45000	For complete testing
Cl-4.13.4(Hardness)	-	45000	For complete testing
Cl-4.13.5(Ageing Test)	-	45000	For complete testing
Cl-4.13.6(Tear Strength)	-	45000	For complete testing
Cl-4.13.7(Abrasion Resistance)	-	45000	For complete testing
Cl-4.13.8(Flexing Resistance)	-	45000	For complete testing
Cl-4.14(Eyelet)	-	45000	For complete testing
Cl-4.15.2(Breaking Load and Tag Retention)	-	45000	For complete testing
Cl-5(Chemical Requirements)	-	45000	For complete testing All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-7(Marking)	-	45000	For complete testing
Cl.4.5.8(Energy Absorption of Seat Region)	-	45000	For complete testing
Cl- 4.5.3.1(Upper-outsole bond strength)	-	45000	For complete testing
Cl.4.5.3.2(Interlayer bond strength)	-	45000	For complete testing
Cl-4.9.1(Material)	-	45000	For complete testing
Cl-4.9.2(Water Absorption and Desorption)	-	45000	For complete testing
Cl-4.13.1(Material)	-	45000	For complete testing
Cl-4.15.1(Material)	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	0	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	All Chemical tests except disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compounds, polychlorophenols, Nikel.
4.9 Insocks(Insock thickness)	-	0	-

-
-

3155

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

37000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.5("SIZE AND FITTINGS ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.6("CONSTRUCTION ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.7(MATERIAL)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test) All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.4,Table no. 4(ii)(Density)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.4,Table no. 5(i)(Density)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.9.(MARKING AND PACKING)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	25000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	25000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl. No.8.6.2(Lead content)	-	25000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl-5 ((Amendment No-1)(Category And Type)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	25000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	25000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl-10 (Amendment No-1)(Marking)	-	12000	For Complete mechanical test (15 % discount to BIS for Mechanical and Chemical test)
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	All chemical tests except Disperse dyes, Azo dyes, Chromium VI, DMFU, Formaldehyde, Organotin Compunds, Polychlorophenols, Nickel.0

-
-

3156

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 10702 (2023)

Hawai Chappal-Specification

37000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.2(Length)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.3(Thickness)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No. 1 , i)(Density)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No. 1 , iii)(3Split tear strength)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No . 2 , iv)(Stud bolt)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
6(MARKING AND PACKING)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	25000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	25000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl.No. 5.2(lead content)	-	25000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.1 - 4.1.1(Bottom Material)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.1 - 4.1.2(Strap Material)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.1 - 4.1.3(Material)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.1 - 4.1.4(Material)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.2(Material)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.3 - 4.3.1(Thickness)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.3 - 4.3.2(Thickness)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4 ((Amendment No-1)(Category And Type)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	25000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	25000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	25000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	25000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	12000	For Complete mechanical test (15 % discount to BISfor Mechanical and Chemical test)
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	All chemical tests except disperse dyes, Azo Dyes, Chromium VI, DMFU, Formaldehyde, Organotin compounds, Polycholorphenols, Nickel.

-
-

3157

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 9281 : Part 3 (1981)

Specification for electronic weighing systems: Part 3 requirements

upto and including 700 Kg

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1 Table 1 Sl. No.1(Model No. - - IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 1 Sl. No.2(Serial No. - IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 1 Sl. No.3(Rated Load ( RL ) - IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 1 Sl. No.4(Mode of operation Compression/tension/ universal -IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 1 Sl. No.5(Input resistance / impedance - IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 1 Sl. No.6(Output resistance / impedance -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.7(Input voltage/current - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.8(Input voltage/current (Max) - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.9(Overload, safe - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.10(Overload, ultimate - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.11(Accuracy - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.12(Rated output voltage - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.13(Tolerance on rated output -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.14(No load output - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.15(Drift in no load output (zero drift ) after 1 hour of warm-up -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.16(Instability of RO after warm-up period of 1 hour -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.17(Non-linearity ( whereever applicable )- IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.18(Hysteresis (wherever applicable) -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.19(Non-repeatability of zero output -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.20(Non-repeatability of rated output - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.21(Creep at rated load after 30 minutes -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.22(Creep recovery after 10 minutes - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.23(Side load, safe -IS : 9281 ( Part II )-1979)	-	22500	For complete testingFor complete testing
3.1 Table 1 Sl. No.24(Side load, ultimate -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.25(Side load error for 10 percent RL -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.26(Concentric angular loading error At 1° inclination -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.27(Concentric angular loading eror At 3° inclination -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.28(Eccentric loading error (at 1 mm of eccentricity) -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.29(Eccentric angular loading error 1 mm eccentricity and 1° inclination - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.30(1 mm eccentricity and 3° inclination - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.31(Temperature range CompessatedIS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.32(Temperature range Usable -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.33(Temperature effect on no load output -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.34(Temperature effect on rated output - IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.35(Deflection at the rated load -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.36(Insulation resistance -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.37(Shunt calibration output ( wherever applicable ) -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.38(Tolerance on shunt calibration -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.39(Humidity -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.40(Effect of radiation^ vibrationand corrosion -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.41(Electrical connection -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.42(Dimensions, weight -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.43(Casing material -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.44(Surface finish/protection/ type sealing -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.45(Mounting details and outline drawing -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 1 Sl. No.46(Manufacturer's name and address -IS : 9281 ( Part III )-1981)	-	22500	For complete testing
3.1 Table 2 Sl. No.1(Rated load -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.2(Accuracy -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.3(Transducer excitation and distortion/regulation -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.4(Non-linearity -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.5(Drift of no-load output with temperature -IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 2 Sl. No.6(Drift of no-load output with time after 1 h -IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 2 Sl. No.7(Drift of full scale output with time after 1 h -IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 2 Sl. No.8(Internal calibration -IS : 9281 ( Part II )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
3.1 Table 2 Sl. No.9(Number of scale division -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.10(Resolution -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.11(Tare provision -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.12(Display -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.13(Recording -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.14(Speed of measurement- IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.15(Overload indication -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.16(Response to full scale -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.17(Operating temperature -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.18(Warm up periods -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.19(Weight IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.20(Dimensions -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.21(Environmental condition -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.22(Operating voltage and frequency -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
3.1 Table 2 Sl. No.23(Tolerance on operating voltage -IS : 9281 ( Part II )-1979)	-	22500	For complete testing
4(MARKING IS : 9281 ( Part III )-1981)	-	22500	For complete testing
4.1 -a)(Model designation and serial number IS : 9281 ( Part III )-1981)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
4.1 -b)(b) Rated load -IS : 9281 ( Part III )-19819)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
4.1 -c)(c) Non-linearity -IS : 9281 ( Part III )-1981)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
4.1 -d)(d) Resolution -IS : 9281 ( Part III )-1981)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
4.1 -e)(e) Manufacturer's name or trade-mark - IS : 9281 ( Part III )-1981)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg
4.2(The product may also be marked with Standard mark. - IS : 9281 ( Part III )-1979)	-	22500	22,250 for upto and including 100 kg 27,500 for above 100Kg to 200 Kg 30,000 for above 200 Kg to 300 Kg 33,500 for above 300 Kg to 400 Kg 38,000 for above 400 Kg to 500 Kg 40,500 for above 500 kg to 600 Kg 43,500 for above 600 Kg to 700 Kg

-
-

3158

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4824 (2022)

Bead wires for tyres - Specification

19700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Clause 6.1 - Table 1"(Carbon)	-	5000	For chemical test
"Clause 6.1 - Table 1"(Silicon)	-	5000	For chemical test
"Clause 6.1 - Table 1"(Mangnese)	-	5000	For chemical test
"Clause 6.1 - Table 1"(Sulphur)	-	5000	For chemical test
"Clause 6.1 - Table 1"(Phosphorous)	-	5000	For chemical test
"Clause 6.1 - Table 1"(Nitrogen)	-	5000	For chemical test
Clause 7.4.1 - Table 5(Protective Coating)	-	8200	For dimensional and other qualitative test
Clause 7.4.3 Table 6(Coating Weight)	-	8200	For dimensional and other qualitative test
"Clause 7.2.2 and 7.2.3 - Table 3"(Tensile Strength)	-	6500	For mechanical tests
"Clause 7.2.2 and 7.2.3 - Table 3"(Minimum Elongation at rupture)	-	6500	For mechanical tests
"Clause 7.2.2 and 7.2.3 - Table 3"(0.2 percent proof strength)	-	6500	For mechanical tests
"Clause 7.3 - Table 4"(Torsion Test)	-	6500	For mechanical tests
Clause 7.4.2(Surface Quality)	-	8200	For dimensional and other qualitative test
Clause 7.5.3(Wire Straightness)	-	8200.01	For dimensional and other qualitative test
Clause 7.5.4(Residual Torsions)	-	6500	For mechanical tests
Clause 7.6.1(Dimensions)	-	8200	For dimensional and other qualitative test
Clause 7.6.3(Out of Roundness)	-	8200	For dimensional and other qualitative test
Clause 7.6.4(Adhesion Test)	-	8200	For dimensional and other qualitative test
6.2 (Table No.-2)(Chemical composition Permissible variation,(%) C Mn Si P S N)	-	5000	For chemical tests
7.2.1 (Table No.- 3)(Tensile strength,(Mpa) - IS 1608 (Part 1) Elongation,(%))	-	6500	For mechanical test
7.5.1(Unit package)	-	8200	For dimensional and other qualitative test
7.5.2 (Table No.- 3)(Welds)	-	8200	For dimensional and other qualitative test
Cl. 5(Manufacture)	-	8200	For dimensional and other qualitative test
Cl 7.2.1, Table 3(Tensile Test)	-	6500	For mechanical tests
Cl 7.2.2, Table 3(Elongation)	-	6500	For mechanical tests
Cl 7.2.3, Table 3(0.2 Percent Proof strength)	-	6499.97	For mechanical tests
Cl 7.3, Table 4(Torsion Test)	-	6500	For mechanical tests
Cl 7.4.1, Table 5(Protective Coating)	-	0	except chemical composition of coating material by XRF method.
Cl 7.4.2(Surface Quality)	-	8200	For dimensional and other qualitative test
Cl 7.4.3, Table 6(Coating Weight)	-	8200	For dimensional and other qualitative test
Cl 7.6.1(Dimensions)	-	8200	For dimensional and other qualitative test
Cl 7.6.2, Table 7(Size Tolerances)	-	8200	For dimensional and other qualitative test
Cl 7.6.3(Out-of-roundness)	-	8200	For dimensional and other qualitative test
Cl 7.6.4, Annex A(Requirements for Adhesion)	-	8200	For dimensional and other qualitative test
Cl 8.5(Straightness)	-	8200	For dimensional and other qualitative test
Cl 8.6(Residual Torsions)	-	8200	For dimensional and other qualitative test

-
-

3159

CIPET, KOCHI

6137634

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

4897 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	0.00	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	0.00	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	3775	Specimen preparation charges included
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	0.00	Included in Cyclic test for BWP
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	0.00	Included in Cyclic test for BWP
As per Clause 7.4(Acidity And Alkalinity (pH))	-	375	-
As per Clause 9(Marking)	-	0.00	-
As per Clause 4 Table 1(TYPES)	-	0.00	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	0.00	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	0.00	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	0.00	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	0.00	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	0.00	-
As per Clause 9(Marking)	-	0.00	-
As per Clause 4 Table 1(TYPES)	-	0.0	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	0.0	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	0.0	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	0.0	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	0.0	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	0.0	-
As per Clause 9(Marking)	-	0.0	-

31 Dec, 2026

-
Included w.e.f. 04.11.2025

3160

Classic Instrumentation Pvt. Ltd. (8135126), Noida

8135126

IS 16242 : Part 1 (2025)

Uninterruptible power systems UPS Part 1 Safety requirements (first revision)

UPTO 10kV

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Fault and abnormal conditions)	-	5000	-
Cl-4.3(Short-circuit and overload protection)	-	5000	-
Cl-4.3.101(AC input current)	-	5000	-
Cl-4.3.102(Transformer protection)	-	5000	-
Cl-4.3.103(AC input short-circuit current)	-	5000	-
Cl-4.3.104(Protection of the energy storage device)	-	5000	-
Cl-4.3.105(Unsynchronised load transfer)	-	5000	-
Cl-4.4(Protection against electric shock)	-	5000	-
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	5000	-
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	5000	-
Cl-4.4.7.1.1(Influencing factors)	-	5000	-
Cl-4.4.7.1.2(Pollution degree)	-	5000	-
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	5000	-
Cl-4.4.7.7(PWB spacings for functional insulation)	-	5000	-
Cl-4.4.9(Capacitor discharge)	-	5000	-
Cl-4.5.2(Service access areas)	-	5000	-
Cl-4.6(Protection against fire and thermal hazards)	-	5000	-
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	5000	-
Cl-4.6.3.1(General)	-	5000	-
Cl-4.6.3.2(Flammability of enclosure materials)	-	5000	-
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	5000	-
Cl-4.6.4.1(Temperature limits- Internal parts)	-	5000	-
Cl- 4.6.5(Limited power sources)	-	5000	-
Cl-4.7(Protection against mechanical hazards)	-	5000	-
Clause 4(Protection against hazards)	-	5000	-
Cl-4.7.101(Protection in service access area)	-	5000	-
Clause 5(Test requirements)	-	5000	-
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	5000	-
Clause 5.2.2(Mechanical tests)	-	5000	-
Clause 5.2.3(Electrical tests)	-	5000	-
Cl-4.9(Protection against environmental stresses)	-	5000	-
Cl-4.10(Protection against sonic pressure hazards)	-	5000	-
Clause 5.2.4("Abnormal operation tests")	-	5000	-
Cl-4.11(Wiring and connections)	-	5000	-
Clause 5.2.5(Material tests)	-	5000	-
Clause 5.2.6(Environmental tests)	-	5000	-
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	5000	-
Clause 5.2.7(Hydrostatic pressure test)	-	5000	-
Cl-4.11.101.2(Cord anchorages and strain relief)	-	5000	-
Clause 6(Information and marking requirements)	-	5000	-
Cl-4.101.1(Emergency switching (disconnect) device)	-	5000	-
Clause 6.1.101(Durability)	-	5000	-
Cl-4.101.2(Normal disconnect devices)	-	5000	-
Cl-4.102.1(Stored energy source- General)	-	5000	-
Cl-4.102.2(Accessibility and maintainability)	-	5000	-
Cl-4.102.3(Distance between battery cells)	-	5000	-
Cl- 4.102.5(Electrolyte spillage)	-	5000	-
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	5000	-
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	5000	-
Cl- 4.102.8.2(Location of protective devices)	-	5000	-
Cl-4.102.8.3(Rating of protective devices)	-	5000	-
Cl-4.103(UPS connection to telecommunication lines)	-	5000	-
Cl-5.1.5.3(Operating parameters for tests)	-	5000	-
Cl-5.1.7(Test overview)	-	5000	-
Cl-5.2.2.2(Non-accessibility test)	-	5000	-
Cl-5.2.2.4.4(Drop test)	-	5000	-
Cl-4.8.102(Backfeed protection)	-	5000	-
Cl- 4.102.7(Charging voltages)	-	5000	-
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	5000	-
Cl-5.2.2.6.102(Rack mounted equipment test)	-	5000	-
Cl-5.2.2.101(Cord guard test)	-	5000	-
Cl-5.2.3.9(Limited power source test)	-	5000	-
Cl-5.2.3.10(Temperature rise test)	-	5000	-
Cl-5.2.3.101.1(Backfeed protection test- General)	-	5000	-
Cl-5.2.3.101.2(Test for pluggable UPS)	-	5000	-
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	5000	-
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	5000	-
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	5000	-
Cl-5.2.3.102(Input current test)	-	5000	-
Cl-5.2.3.103(Short-time withstand current test)	-	5000	-
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	5000	-
Cl-5.2.3.104(Transformer protection test)	-	5000	-
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	5000	-
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	5000	-
Cl-5.2.6.4(Vibration test)	-	5000	-
Cl-5.2.6.5(Salt mist test)	-	5000	-
Cl-5.2.6.6(Dust and sand test)	-	5000	-
Cl-6(Information and marking requirements)	-	5000	-
Cl-4.2(Fault and abnormal conditions)	-	5000	-
Cl-4.3(Short-circuit and overload protection)	-	5000	-
Cl-4.3.101(AC input current)	-	5000	-
Cl-4.3.102(Transformer protection)	-	5000	-
Cl-4.3.103(AC input short-circuit current)	-	5000	-
Cl-4.3.104(Protection of the energy storage device)	-	5000	-
Cl-4.3.105(Unsynchronised load transfer)	-	5000	-
Cl-4.4(Protection against electric shock)	-	5000	-
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	5000	-
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	5000	-
Cl-4.4.7.1.1(Influencing factors)	-	5000	-
Cl-4.4.7.1.2(Pollution degree)	-	5000	-
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	5000	-
Cl-4.4.7.7(PWB spacings for functional insulation)	-	5000	-
Cl-4.4.9(Capacitor discharge)	-	5000	-
Cl-4.5.2(Service access areas)	-	5000	-
Cl-4.6(Protection against fire and thermal hazards)	-	5000	-
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	5000	-
Cl-4.6.3.1(General)	-	5000	-
Cl-4.6.3.2(Flammability of enclosure materials)	-	5000	-
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	5000	-
Cl-4.6.4.1(Temperature limits- Internal parts)	-	5000	-
Cl- 4.6.5(Limited power sources)	-	5000	-
Cl-4.7(Protection against mechanical hazards)	-	5000	-
Clause 4(Protection against hazards)	-	5000	-
Cl-4.7.101(Protection in service access area)	-	5000	-
Clause 5(Test requirements)	-	5000	-
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	5000	-
Clause 5.2.2(Mechanical tests)	-	5000	-
Clause 5.2.3(Electrical tests)	-	5000	-
Cl-4.9(Protection against environmental stresses)	-	5000	-
Cl-4.10(Protection against sonic pressure hazards)	-	5000	-
Clause 5.2.4("Abnormal operation tests")	-	5000	-
Cl-4.11(Wiring and connections)	-	5000	-
Clause 5.2.5(Material tests)	-	5000	-
Clause 5.2.6(Environmental tests)	-	5000	-
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	5000	-
Clause 5.2.7(Hydrostatic pressure test)	-	5000	-
Cl-4.11.101.2(Cord anchorages and strain relief)	-	5000	-
Clause 6(Information and marking requirements)	-	5000	-
Cl-4.101.1(Emergency switching (disconnect) device)	-	5000	-
Clause 6.1.101(Durability)	-	5000	-
Cl-4.101.2(Normal disconnect devices)	-	5000	-
Cl-4.102.1(Stored energy source- General)	-	5000	-
Cl-4.102.2(Accessibility and maintainability)	-	5000	-
Cl-4.102.3(Distance between battery cells)	-	5000	-
Cl- 4.102.5(Electrolyte spillage)	-	5000	-
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	5000	-
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	5000	-
Cl- 4.102.8.2(Location of protective devices)	-	5000	-
Cl-4.102.8.3(Rating of protective devices)	-	5000	-
Cl-4.103(UPS connection to telecommunication lines)	-	5000	-
Cl-5.1.5.3(Operating parameters for tests)	-	5000	-
Cl-5.1.7(Test overview)	-	5000	-
Cl-5.2.2.2(Non-accessibility test)	-	5000	-
Cl-5.2.2.4.4(Drop test)	-	5000	-
Cl-4.8.102(Backfeed protection)	-	5000	-
Cl- 4.102.7(Charging voltages)	-	5000	-
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	5000	-
Cl-5.2.2.6.102(Rack mounted equipment test)	-	5000	-
Cl-5.2.2.101(Cord guard test)	-	5000	-
Cl-5.2.3.9(Limited power source test)	-	5000	-
Cl-5.2.3.10(Temperature rise test)	-	5000	-
Cl-5.2.3.101.1(Backfeed protection test- General)	-	5000	-
Cl-5.2.3.101.2(Test for pluggable UPS)	-	5000	-
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	5000	-
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	5000	-
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	5000	-
Cl-5.2.3.102(Input current test)	-	5000	-
Cl-5.2.3.103(Short-time withstand current test)	-	5000	-
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	5000	-
Cl-5.2.3.104(Transformer protection test)	-	5000	-
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	5000	-
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	5000	-
Cl-5.2.6.4(Vibration test)	-	5000	-
Cl-5.2.6.5(Salt mist test)	-	5000	-
Cl-5.2.6.6(Dust and sand test)	-	5000	-
Cl-6(Information and marking requirements)	-	5000	-

23 Oct, 2028

-
included w.e.f 05-01-2026

3161

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

Household and Similar Electrical Appliances Safety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	500	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	500	-
Cl-14(Transient overvoltages)	-	1000	-
Cl-15(Moisture resistance)	-	500	-
Cl-16(Leakage current and electric strength)	-	500	-
Cl-17(Overload protection of transformers and associated circuits)	-	500	-
Cl-18(Endurance)	-	1000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	500	-
Cl-21(Mechanical strength)	-	500	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	500	-
Cl-24(Components)	-	500	-
Cl-25(Supply connection and external flexible cords)	-	500	-
Cl-26(Terminals for external conductors)	-	500	-
Cl-27(Provision for earthing)	-	500	-
Cl-28(Screws and connections)	-	500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	500	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	500	-

15 Jun, 2029

-
included w.e.f 09-12-2025.

3162

CIMEC Infralabs Private Limited

8195606

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Grade: BWP and MR

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1000	NIL
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1500	NIL
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1500	NIL
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1500	NIL
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1500	NIL
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1500	NIL
9.2.3(Adhesion of Plies - Annexure H)	-	750	NIL
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	NIL
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	NIL
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1800	NIL
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1800	NIL
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1800	NIL
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1800	NIL
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1800	NIL
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1800	NIL
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	500	NIL
7.3(Dimensional Requirements - Squareness - Annexure D)	-	500	NIL
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	500	NIL
7.3(Dimensional Requirements - Thickness - Annexure E)	-	500	NIL
7.3(Dimensional Requirements - Width - 8.1.4)	-	500	NIL
7.3(Dimensional Requirements - Length - 8.1.4)	-	500	NIL
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	500	NIL
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	500	NIL
9.2.6 (mechanical)(Spot test - Annexure L)	-	1500	NIL
cl. 11(marking)	-	250	NIL
cl. 11.1(marking - BIS certification marking)	-	250	NIL
6.2(Core- Moisture & Width)	-	750	NIL
6.3(Cross Bands and Faces- Moisture content)	-	750	NIL
6.3.1(Thickness of cross band and face veneers)	-	500	NIL
Cl-7.1(Thickness)	-	500	NIL
Cl-7.2(Sizes)	-	500	NIL

14 Jan, 2029

-
Exclusion: Cl-10 (ADDITIONAL REQUIREMENTS FOR ECO-MARK)

3163

CIMEC Infralabs Private Limited

8195606

IS 303 (1989)

Plywood for General Purposes -

MR, BWR, BWP

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	Nil
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	Nil
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1500	Nil
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1500	Nil
11.3(Moisture Content - Part 1 of IS 1734)	-	750	Nil
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	Nil
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	Nil
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	Nil
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	Nil
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	Nil
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	Nil
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	Nil
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	Nil
5.1(Type - For BB Type)	-	500	Nil
5.1(Type - For AB Type)	-	500	Nil
5.1(Type - For AA Type)	-	500	Nil
4(Grade - For MR grade)	-	500	Nil
4(Grade - For BWR grade)	-	500	Nil
cl. 13.1(marking)	-	500	Nil
cl. 13.2(marking)	-	500	Nil
CL-8.2(Thickness)	-	500	Nil
CL-7.2.3(Grain Direction)	-	500	Nil
CL-7.2.1(Thickness)	-	500	Nil
CL-7.2.5.1(Gaps in cores and cross-bands)	-	500	Nil

14 Jan, 2029

-
Exclusion: Cl-12 (Amendment No-2 OF IS 303) (OPTIONAL REQUIREMENT FOR ECO MARK)

3164

CIMEC Infralabs Private Limited

8195606

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2100	Nil
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2100	Nil
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2100	Nil
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2100	Nil
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	750	Nil
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	750	Nil
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	Nil
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1500	Nil
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	Nil
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	Nil
7 -Table 2- i(Fineness 4031 Part 2)	-	1500	Nil
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	nil
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	Nil
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	750	Nil
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	750	Nil
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	750	Nil
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	Nil
11(Marking)	-	500	Nil

14 Jan, 2029

-
Exclusion: 7 -Table 2- v (Transverse Strength - IS 4031 Part 8 (Optional)), 4 (RAW MATERIAL),

3165

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

Type :1to 4,Class E1 & E2, Grade :BWP/MR/BWR

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 4.2(Type)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 4.3(Formaldehyde Class)	-	3000	Formaldehyde Class
Cl 5.2(Adhesive)	-	6867	EXTRA FOR ADHESIVE RESIN TESTING AS PER IS 848
Cl 7.1(Surface Requirements- For Type 1)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 7.2(Surface Requirements- For Type 2)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 7.3(Surface Requirements- For Type 3)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 7.4(Surface Requirements- For Type 4)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 8.1(Dimensions (Length and Width))	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 8.2(Dimensions (Thickness))	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 8.4- Table 1(Tolerances)	-	5000	For Complete Cl 4, Cl 7, Cl 8 ,Cl6 and Cl 9
Cl 11.3(Moisture Content)	-	1000	for moisture content test
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	1000	for water resistance test
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	1000	for water resistance test
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	1000	for water resistance test
Cl 11.5(Formaldehyde Content Test)	-	3000	-
Cl 11.6(Steady - State Formaldehyde Emission Test ( Optional Test))	-	0	0
Cl 12(Marking)	-	0	0

-
Included w.e.f 13.11.2025 Exclusion: Cl 11.6 (Steady - State Formaldehyde Emission Test ( Optional Test))

3166

ADS LABTECH, GHAZIABAD

8178326

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES FOR SOIL AND WASTE DISCHARGE SYSTEM FOR INSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	.
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1500	.
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	1000	.
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	1000	.
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	1000	.
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	1000	.
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	1000	.
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	1000	.
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	1000	.
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	2000	.
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	2000	.
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	2000	.
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	5000	1600 hour-approx 7 month
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1000	.
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	.
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	.
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	.
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	.
8.6(Effect on Water Test)	-	2500	.
Cl 8.6(Effect on Water Lead (first extraction))	-	2500	.
Cl 8.6(Effect on Water Lead (first extraction))	-	2500	.
Cl 8.6(Effect on Water Lead (third extraction))	-	2500	.
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	2500	.
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	2500	.
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	2500	.
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	.
14(Marking)	-	1000	.
CL 7.3(Socket length (Take 4 reading & minimum will be reported))	-	1000	.
CL 7.3.1(Socket wall Thickness For S2 and S3 (Take 4 reading and average will be reported))	-	1000	.
CL 7.3.2 grooved sockets(Inside diameter of Sockets, D1 (Take 4 reading & minimum, Maximum will be reported))	-	1000	.
CL 7.3.2 grooved sockets(Inside diameter of beading D2 (Take 4 reading & minimum, Maximum will be reported))	-	1000	.
CL 7.3.2 grooved sockets(Length of beading and Neck A (Take 4 reading & Maximum will be reported))	-	1000	.
CL 7.3.2 grooved sockets(Neck of Socket B (Take 4 reading & minimum, will be reported))	-	1000	.
CL 7.3.2 grooved sockets(Length beyond beading C (Take 4 reading & minimum will be reported))	-	1000	.

15 May, 2027

-
included w.e.f 05.01.2026

3167

CIMEC Infralabs Private Limited

8195606

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC-33, OPC-43, OPC-43S, OPC-53, OPC-53S

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2100	Nil
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2100	Nil
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2100	Nil
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2100	Nil
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2100	Nil
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2100	nil
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2100	nil
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2100	nil
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2100	nil
7 Table-3 iii b(Setting Time Final)	-	750	nil
7 Table-3 iii a(Setting Time Initial)	-	750	nil
7 Table-3 ii b(Expansion after aeration)	-	1500	nil
7 Table-3 ii b(Expansion by Autoclave)	-	1500	nil
7 Table-3 ii a(Expansion after aeration)	-	1000	nil
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	nil
7 Table-3 i.(Fineness)	-	1000	nil
6.1 Table-2 viii(Alkali content)	-	1000	nil
6.1 Table-2 vii(Chloride content)	-	1000	nil
6.1 Table-2 vi(Loss on ignition)	-	750	nil
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	750	nil
6.1 Table-2 iv(Magnesia)	-	750	nil
6.1 Table-2 iii.(Insoluble residue)	-	500	nil
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	nil
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	1500	nil
11(Marking)	-	500	nil
10(Packing)	-	500	nil
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	nil
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	nil
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	750	nil
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	750	1000
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	750	Nil
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	nil
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	1000	nil
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1500	nil
5.1.1 Table 1 Sl. No. iv(Calcium Carbonate)	-	1000	nil
7 Table-3 iii a(Setting Time Initial)	-	750	nil
7 Table-3 iii a(Setting Time Initial)	-	750	nil
7 Table-3 iii a(Setting Time Initial)	-	750	nil

14 Jan, 2029

-
-

3168

CIMEC Infralabs Private Limited

8195606

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Size: 25 to 300 Sq. mm, Stranded Conductor

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	Individual wire diameter measurement
12.3, Table-1(Breaking load before stranding)	-	1000	Nil
12.3, Table-1(Breaking load after stranding)	-	1000	Nil
12.4(Wrapping test)	-	250	Nil
12.5, Table 1(Resistance test)	-	1500	Nil
12.6, Table 3(Measurement of lay ratio)	-	500	Nil
9.3(Stranding)	-	100	Nil
6(Freedom from defects)	-	100	Nil
7.2.1(Sizes)	-	150	Nil
8, 8.1, 8.2(Joint in wires, except during stranding)	-	250	Nil
9.2(Lay ratio)	-	500	Nil
9.4(Multiple layer of wires)	-	250	Nil
4.1(Resistivity)	-	1500	Nil
4.2(Density)	-	250	Nil
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1500	A Physical Constant-Applicable, If required to check
5(Material)	-	100	Visual Examination
7.1.1(Nominal Sizes)	-	250	Nil
7.2.2(Resistance)	-	1500	Nil

14 Jan, 2029

-
-

3169

Unique Test House LLP

9134536

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

ALL SIZE

6500 View breakup
-

07 Sep, 2028

-
Included w.e.f. 04.11.2025

3170

Global Scientific Solution (P) Ltd.

8189526

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	2000	-
15.2(Moisture Resistance, IS 302-1)	-	2000	-
15(Moisture Resistance, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	2000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	2000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	1000	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-

31 Oct, 2028

-
Included w.e.f 08.12.2025 EMI/EMC 19.11.4.1 to 19.11.4.7

3171

CIMEC Infralabs Private Limited

8195606

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

16 to 95 Sq. mm, XLPE Insulation

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	250	Nil
4.2(Messenger (Neutral Conductor or Otherwise))	-	250	Nil
6.1(Flexibility class)	-	100	Nil
6.2(Compactness)	-	100	Nil
6.2(No of strands)	-	200	Nil
6.2(Surface)	-	100	Nil
6.3(Protective barrier)	-	100	Nil
6.4(size of street lighting conductor)	-	250	Nil
6.5(Size of messenger conductor )	-	250	Nil
6.6(Joints in messenger conductor )	-	250	Nil
6.6(Direction of outer layer)	-	250	Nil
7.1(Insulation)	-	100	Nil
7.2( Thickness of insulation)	-	500	Nil
7.3(Tolerance on thickness of insulation )	-	500	Nil
7.4(Aplication of the insulation )	-	100	Nil
7.5(Colour of the insulation )	-	100	Nil
8.1(Core identification)	-	100	-
8.2(Core identification)	-	100	Nil
8.3(Identification by other means)	-	100	Nil
9.1(Assembly (Laying up))	-	100	Nil
9.2(Assembly (Laying up))	-	100	Nil
9.3(Direction of lay)	-	100	Nil
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	1500	Nil
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	Nil
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1500	Nil
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	100	Nil
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	Nil
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1500	Nil
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1000	Nil
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1000	Nil
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2000	Nil
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2000	Nil
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	Nil
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	Nil
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	750	Nil
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	Nil
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1500	Nil
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1000	Nil
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1000	Nil
10.1 g)(High voltage test - IS10810:Part 45)	-	1500	Nil
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	Nil
10.1 d) iii)(Carbon Black Content)	-	1500	Nil
6.1(Construction of phase conductor)	-	100	Nil
6.1(Number of wires (phase conductor))	-	100	Nil
6.1(Construction of Street Lighting conductor)	-	100	Nil
6.1(Number of wires (Street Lighting conductor))	-	100	Nil
12.1(Manufacturer's Identification)	-	100	Nil
12.2(Cable Identification)	-	100	Nil
5.1(Insulation)	-	100	Nil

14 Jan, 2029

-
Exclusion: 10.1 d) i) (Physical test for PE insulation: Tensile strength - IS 10810: Part 7 ), 10.1 d) i) (Physical test for PE insulation: elongation at break - IS 10810: Part 7), 10.1 d) ii) (Melt flow index- IS 10810: Part 23), 10.1 d) iv) (Vicat softening point -IS 10810: Part 22), 10.1 d) v) (Environmental stress cracking -IS 10810:Part29)

3172

Unique Test House LLP

9134536

IS 5082 (1998)

Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications (Second Revision)

ALL SIZE

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(CHEMICAL COMPOSITION Table 1)	-	500	.........
Clause 5(FREEDOM FROM DEFECTS)	-	200	..........
8.1(MECHANICAL TEST Tensile Strength Min, Mpa)	-	1000	......
8.1(MECHANICAL TEST (0.2 Percent Proof Stress Min, Mpa))	-	1000	.....
8.1(Percent Elongation on 5.65 Min)	-	1000	....
8.1(Electrical Conductivity at 20°C,Min)	-	500	.........
8.1(Maximum Electrical Resistivity at 20°C ohm-mm/mm2)	-	500	.............
8.2(Bend Test)	-	1000	.............
Clause 10(DIMENSIONAL TOLERANCES)	-	2000	..........
6.1, Table 1(Aluminium)	-	500	.............
6.1, Table 1(Copper)	-	500	...........
6.1, Table 1(Magnesium)	-	500	.........
6.1, Table 1(Silicon)	-	500	.........
6.1, Table 1(Manganese)	-	500	...........
6.1, Table 1(Zinc)	-	500	............
6.1, Table 1(Titanium)	-	500	............
6.1, Table 1(Chromium)	-	500	............
6.1, Table 1(Iron)	-	500	...........
6.1, Table 1(Vanadium)	-	500	.........

07 Sep, 2028

-
Included w.e.f. 31.10.2025

3173

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	10% discount to BIS
8(Protection against access to live parts)	-	500	10% discount to BIS
10(Power input and current)	-	1000	10% discount to BIS
11(Heating)	-	1000	10% discount to BIS
12(Charging of metal-ion batteries)	-	1000	10% discount to BIS
13.1 &13.2(Leakage current test)	-	1000	10% discount to BIS
13.1 &13.3(Electric strength test)	-	1000	10% discount to BIS
14(Transient overvoltages)	-	2000	10% discount to BIS
15(Moisture resistance)	-	1000	10% discount to BIS
15.3(Moisture resistance)	-	1000	10% discount to BIS
16.1 &16.2(Leakage current test)	-	1000	10% discount to BIS
16.1 & 16.3(Electric strength test)	-	1000	10% discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	10% discount to BIS
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	10% discount to BIS
19.101(Abnormal operation)	-	1000	10% discount to BIS
20.1(Stability and mechanical hazards)	-	500	10% discount to BIS
20.2(Stability and mechanical hazards)	-	500	10% discount to BIS
21(Mechanical strength)	-	500	10% discount to BIS
21.101(Mechanical strength)	-	500	10% discount to BIS
21.102(Mechanical strength)	-	500	10% discount to BIS
21.103(Mechanical strength)	-	500	10% discount to BIS
22(Construction)	-	500	10% discount to BIS
22.101(Construction)	-	500	10% discount to BIS
22.102(Construction)	-	500	10% discount to BIS
22.103(Construction)	-	500	10% discount to BIS
23(Internal wiring)	-	1000	10% discount to BIS
24(Components)	-	500	10% discount to BIS
25("Supply connection and external flexible cords")	-	500	10% discount to BIS
26("Terminals for external conductors")	-	500	10% discount to BIS
27(Provision for earthing)	-	500	10% discount to BIS
28(Screws and connections)	-	500	10% discount to BIS
29("Clearances, creepage distances and solid insulation")	-	500	10% discount to BIS
30(Resistance to heat and fire)	-	2000	10% discount to BIS
31(Resistance to rusting)	-	500	10% discount to BIS
32("Radiation, toxicity and similar hazards")	-	500	10% discount to BIS
19.11.4.1(Electrostatic discharges)	-	2500	10% discount to BIS
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

21 Jul, 2028

-
"1 19.11.4.2 (Radiated fields) Radiated fields Instrument not available 2 19.11.4.3 (Fast transient bursts) Fast transient bursts Instrument not available 3 19.11.4.4 (Surge immunity test) Surge immunity test Instrument not available 4 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Instrument not available 5 19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and interruptions Instrument not available 6 19.11.4.7 (Harmonics) Harmonics Instrument not available"

3174

DELHI TEST HOUSE, Azadhpur

8131406

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

ALL

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Materials for Primary Packaging (Container))	-	2000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	2000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	2000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	2000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	6000	NOTE:- WE HAVE COMPLETE TESTING FACILITY FOR CLAUSE 4.3, TABLE -1 OF IS 9833 WITH EXCLUSION OF CLAUSE 4.3, TABLE -1 SR NO (X), (XI), (xIII).
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	100	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.2(Design, Shape and Dimensions)	-	1000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.4(Capacity (Nominal))	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.4(Capacity (Brimfull))	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.5(Wall Thickness Top)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.5(Wall Thickness Middle)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.5(Wall Thickness Bottom)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.1.1(Colour-Transparency)	-	1000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	1000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	1000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.3.1(Drop Impact test)	-	1000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.3.2(Stack Load test)	-	1000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.1(Overall Migration Container)	-	2500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.1(Overall Migration Closure)	-	2500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Barium)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Copper)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Iron)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Lithium)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Manganese)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Zinc)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Antimony)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Barium)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Copper)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Iron)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.3(Colour migration Container)	-	2000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.4.3(Colour migration Closure)	-	2000	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.5(Water Potability Test (Taste))	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.5(Water Potability Test (odour))	-	500	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 5.1(Marking)	-	250	COMPLETE TESTING CHARGES:- 18000/- and if Packaging-Closure colourants ( clause 4.3 table -1 of IS 9833) test will be done then separate ink/colourant is provided with tha sample and extra testing charges of 6000 will be extra charged for each colourant
Clause 4.6.1.2(Colour-Tint)	-	8000	NOTE:-WE HAVE COMPLETE TESTING FACILITY FOR CLAUSE 4.3, TABLE -1 OF IS 9833 WITH EXCLUSION OF CLAUSE 4.3, TABLE -1 SR NO (X), (XI), (xIII).

17 Jun, 2027

-
1 Clause 4.1.2.3 (Materials for Primary Packaging-Sleeves for the closure) SLEEVES FOR THE CLOUSER OPTIONAL TEST.

3175

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

BWP/BWR/MR

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	500	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	1000	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	5000	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	5000	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	5000	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	2000	-
As per Clause 9(Marking)	-	200	-

30 Mar, 2027

-
Included w.e.f 10.12.2025

3176

SHRIRAM FOOD AND PHARMA RESEARCH CENTRE, GHAZIABAD

9179606

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Materials for Primary Packaging (Container))	-	100	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	100	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	100	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	100	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	100	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	100	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	100	-
Clause 4.2(Design, Shape and Dimensions)	-	100	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	100	-
Clause 4.4(Capacity (Nominal))	-	100	-
Clause 4.4(Capacity (Brimfull))	-	100	-
Clause 4.5(Wall Thickness Top)	-	100	-
Clause 4.5(Wall Thickness Middle)	-	100	-
Clause 4.5(Wall Thickness Bottom)	-	100	-
Clause 4.6.1.1(Colour-Transparency)	-	500	-
Clause 4.6.1.2(Colour-Tint)	-	100	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	100	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	500	-
Clause 4.6.3.1(Drop Impact test)	-	100	-
Clause 4.6.3.2(Stack Load test)	-	100	-
Clause 4.6.4.1(Overall Migration Container)	-	500	-
Clause 4.6.4.1(Overall Migration Closure)	-	200	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	100	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	100	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	100	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	100	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	100	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	100	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	100	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	100	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	100	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	100	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	500	-
Clause 4.6.4.3(Colour migration Container)	-	100	-
Clause 4.6.4.3(Colour migration Closure)	-	100	-
Clause 4.6.5(Water Potability Test (Taste))	-	1000	-
Clause 4.6.5(Water Potability Test (odour))	-	500	-
Clause 5.1(Marking)	-	100	-

20 Aug, 2027

-
Included w.e.f 08.12.2025

3177

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 13450 : PART 2 : SEC 24 (2019)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 24 infusion pumps and controllers (First Revision)

295000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	147500	-
202(Electromagnetic compatibility – Requirements and tests)	-	147500	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	147500	-
202(Electromagnetic compatibility – Requirements and tests)	-	147500	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	147500	-
202(Electromagnetic compatibility – Requirements and tests)	-	147500	-

24 Sep, 2026

-
Included w.e.f 06-11-2025, only for 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) and 202 (Electromagnetic compatibility – Requirements and tests)

3178

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

195000 View breakup
-

Clause No.	Exclusion	Remark
13.1(Marking (Rating Plates))	-	-
13.2(Terminal Marking Plate)	-	-
13.3(Marking )	-	-
13.4(Marking)	-	-
13.4.1(Marking)	-	-
14.1(MOUNTING ARRANGEMENT)	-	-
14.2(MOUNTING ARRANGEMENT)	-	-
14.3(MOUNTING ARRANGEMENT)	-	-
14.4(MOUNTING ARRANGEMENT)	-	-
15.1.1(TRANSFORMER TANK : Construction)	-	-
15.1.2(TRANSFORMER TANK : Construction)	-	-
15.1.3(TRANSFORMER TANK : Construction)	-	-
15.1.4(TRANSFORMER TANK : Construction)	-	-
15.1.5(TRANSFORMER TANK : Construction)	-	-
17( ABILITY OF TRANSFORMERS TO WITHSTAND EXTERNAL SHORT CIRCUIT )	-	-
21.2 a)(Measurement of winding resistance )	-	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	-
21.2 d)(Measurement of no-load loss and current)	-	-
21.2 e)(Measurement of insulation resistance)	-	-
21.2 f)(Induced over-voltage withstand test)	-	-
21.2 g)( Separate-source voltage withstand test)	-	-
21.5.3.3(Oil leakage test)	-	-
21.3(a )(Lightning impulse test)	-	-
21.3(b)(Temperature-rise test)	-	-
21.3(c)(Short-circuit withstand test)	-	-
21.4 a)( Determination of sound levels)	-	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	-
21.5.2.3( Oil leakage test (routine test))	-	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	-
21.5.3.3(Oil leakage test (routine test))	-	-
21.4 b(Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA))	-	-
21.4 c(No load current at 112.5 percent voltage.)	-	-
21.4 d(Paint adhesion tests)	-	-
21.4 e(BDV and moisture content of oil in the transformer)	-	-
15.5(Total Dry Film Paint Thickness)	-	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	-
11(Minimum clearance in Air)	-	-
16(Conservator for Non-sealed type Transformers)	-	-
20(Fittings)	-	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	-
9.1a)(CRGO Electrical Steel)	-	-
9.1 b)(Amorphous core material)	-	-
9.1 c)(Copper/Aluminium conductor)	-	-
9.1 d)(Kraft paper)	-	-
9.1 e)(Press Board)	-	-
9.1 f)(Mineral oil)	-	-
10(Terminal Arrangement)	-	-
15.2(Pressure and Vacuum Requirements)	-	-
15.4(Gasket)	-	-
19(Tolerances)	-	-
18(Efficiency and regulation)	-	-
4(Service Conditions)	-	-
5(General )	-	-
6.2(Rated frequency)	-	-
6.3(Nominal system voltage)	-	-
6.4(Basic Insulation level )	-	-
6.5(No-Load Voltage Ratios)	-	-
6.6(Winding connections and phase displacement)	-	-
6.7(Tapping Range and Tapping Method)	-	-
6.8(Losses and impedance values)	-	-
6.9(Permissible Flux Density and Over Fluxing )	-	-
6.1(Limits of Temperature-rise)	-	-
7(Technical Parameters of three phase distribution trasnformers higher than 200kva)	-	-
8(Technical Parameters of single phase distribution transformers UP to and including 25 KVA )	-	-
10(Terminal arrangment )	-	-
11(Minimum Clearnaces air )	-	-
12(Connectors )	-	-
13(Marking )	-	-
14(Mounting arrangement)	-	-
15(Trasnformer Tank )	-	-
16(Conservator for Non-Sealed type Transformers)	-	-
17(Ability of transformers to withstand external Short circuit )	-	-
18(Efficiency and Regulation)	-	-
19(Tolerances)	-	-
20(Fittings)	-	-
21(General )	-	-
22(Information required with enquiry and order )	-	-
9(Standard Materials)	-	-
6.1(Rating)	-	-

30 Sep, 2027

-
Included w.e.f 08.12.2025 "21.3(c) (Short-circuit withstand test) 21.4 b (Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA))"

3179

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 5852 : Part 2 (2019)

Toe Caps for Protection of Feet Ã¢â‚¬â€ Specification Part 2 Non-Metallic Toe Caps

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Internal length)	-	500	-
4.3.2(Width of flange)	-	500	-
4.4(Impact resistance)	-	1000	-
4.5(Compression resistance)	-	1000	-
5.5.2(Effect of high temperature)	-	1500	-
5.5.3(Effect of low temperature)	-	1500	-
5.5.4(Effect of fuel oil)	-	1500	-
6(Marking)	-	500	-
4.3.1(Internal length)	-	-	-
4.3.2(Width of flange)	-	-	-
4.4(Impact resistance)	-	-	-
4.5(Compression resistance)	-	-	-
5.5.2(Effect of high temperature)	-	-	-
5.5.3(Effect of low temperature)	-	-	-
5.5.4(Effect of fuel oil)	-	-	-
6(Marking)	-	-	-

-
Included w.e.f 12.11.2025

3180

BIS, Central Laboratory (CL)

None

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (General - IS 4246 : 2025)	-
4.1.1 (General - IS 4246 : 2025)	-
5 (Materials - Cl. 5 of IS 5116)	-
5.1.1 (Materials - Toughened glass, if provided,)	-
5.1 (Materials - IS 5116)	-
6.1 (Design for Maintainance)	-
6.2 (Design for Maintainance)	-
6.3 (Design for Maintainance)	-
6.4 (Design for Maintainance)	-
6.5 (Design for Maintainance)	-
6.6 (Design for Maintainance)	-
7.0 (Rigidity and Stability)	-
8.1 (Workmanship and Finish - Cl. 7 of IS 5116)	-
8.2 (Workmanship and Finish -)	-
8.3 (Workmanship and Finish -)	-
9 (Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-
10 (Injector Jets)	-
11.1 (Burners- Cl. 10 of IS 5116)	-
11.2 (Burners)	-
11.3 (Burners)	-
11.4 (Burners)	-
12.1 (Burner Pan Support)	-
12.2 (Burner Pan Support)	-
12.3 (Burner Pan Support)	-
13.1 (Gas Soundness Test - Cl. 16 of IS 5116)	-
13,2 (Gas Soundness Test)	-
13.2 (Gas Leak Detector)	-
14.1 (Gas Inlet Connection - Cl. 18 of IS 5116)	-
14.3 (Gas Inlet Connection)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number