BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14026 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

3091

Sleen India Biz venture Private Limited, Agra

9139736

IS 16948 (2018)

Medical textile – Permeable nonwoven surgical adhesive tape – Specification

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and 4.2(Workmanship and finish)	-	500	-
5.1 - Table 1 -(i)(Weight of backing material)	-	1250	-
5.1 - Table 1 -(ii)(Weight of adhesive mass)	-	1250	-
5.1 - Table 1 -(iii)(Water vapour permeability)	-	1000	-
5.1 - Table 1 -(iv)(Adhesiveness)	-	2000	-
5.1 - Table 1 -(v)(Width of the tape)	-	500	-
6(Marking)	-	300	-
5.1 - Table 1 -(v)(Width of the tape)	-	0	-
5.1 - Table 1 -(vi)(Perforations)	-	500	-
6(Marking)	-	0	-
8(Packing)	-	200	-
4(Workmanship and finish)	-	0	-
5- Table-1- i)(Weight of backing material)	-	0	-
5- Table-1- ii)(Weight of adhesive mass)	-	0	-
5- Table-1- iii)(Water vapour permeability)	-	0	-
5- Table-1- iv)(Adhesiveness)	-	0	-
5- Table-1- v)(Width of the tape)	-	0	-
5- Table-1- vi)(Width of the tape)	-	0	-
6(Marking)	-	0	-
8(Packing)	-	0	-

15 May, 2027

-
Included w.e.f.23.06.2025

3092

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

All

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	17000	-
As per clause 7(CARBON)	-	17000	-
As per clause 7(SILICON)	-	17000	-
As per clause 7(MANGANESE)	-	17000	-
As per clause 7(PHOSPHORUS)	-	17000	-
As per clause 7(SULPHUR)	-	17000	-
As per clause 7(CHROMIUM)	-	17000	-
As per clause 7(MOLYBEDNUM)	-	17000	-
As per clause 7(NICKEL)	-	17000	-
As per clause 7(NITROGEN)	-	17000	-
As per clause 7(COPPER)	-	17000	-
As per clause 7(NIOBIUM)	-	17000	-
As per clause 7(TITANIUM)	-	17000	-
As per clause 7(ALUMINIUM)	-	17000	-
As per clause 8(HEAT TREATMENT)	-	17000	-
As per clause 9(Dimension Tolerance)	-	17000	-
As per clause 10(TENSILE TEST)	-	17000	-
As per clause 10.2(REVERSE BEND TEST)	-	17000	-
As per clause 10.3(TORSION TEST)	-	17000	-
As per clause 14(FINISH)	-	17000	-
As per clause 15(CORROSION RESISTANCE)	-	17000	-
As per clause 16.2(MARKING)	-	17000	-
As per Clause 6(FREEDOM FROM DEFECTS)	-	17000	-
As per clause 7(CARBON)	-	17000	-
As per clause 7(SILICON)	-	17000	-
As per clause 7(MANGANESE)	-	17000	-
As per clause 7(PHOSPHORUS)	-	17000	-
As per clause 7(SULPHUR)	-	17000	-
As per clause 7(CHROMIUM)	-	17000	-
As per clause 7(MOLYBEDNUM)	-	17000	-
As per clause 7(NICKEL)	-	17000	-
As per clause 7(NITROGEN)	-	17000	-
As per clause 7(COPPER)	-	17000	-
As per clause 7(NIOBIUM)	-	17000	-
As per clause 7(TITANIUM)	-	17000	-
As per clause 7(ALUMINIUM)	-	17000	-
As per clause 8(HEAT TREATMENT)	-	17000	-
As per clause 9(Dimension Tolerance)	-	17000	-
As per clause 10(TENSILE TEST)	-	17000	-
As per clause 10.2(REVERSE BEND TEST)	-	17000	-
As per clause 10.3(TORSION TEST)	-	17000	-
As per clause 14(FINISH)	-	17000	-
As per clause 15(CORROSION RESISTANCE)	-	17000	-
As per clause 16.2(MARKING)	-	17000	-

13 May, 2028

-
Included w.e.f.02.06.2025

3093

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 9139 (2023)

MALLEABLE IRON SHOTS AND GRITS FOR USE IN FOUNDRIES ï¿½ SPECIFICATION

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	27500	For complete testing
Cl-5(MANUFACTURE)	-	27500	For complete testing
Cl-6.1(Shot)	-	27500	For complete testing
Cl-6.2(Grit)	-	27500	For complete testing
Cl-7(Size)	-	27500	For complete testing
Cl-8 (i)(Carbon)	-	27500	For complete testing
Cl-8 (ii)(Silicon)	-	27500	For complete testing
Cl-8 (iii)(Manganese)	-	27500	For complete testing
Cl-8 (iv)(Sulphur)	-	27500	For complete testing
Cl-8 (v)(Phosphorus)	-	27500	For complete testing
Cl-9(Hardness)	-	27500	For complete testing
Cl-10(Microstructure)	-	27500	For complete testing
Cl-11(Specific gravity)	-	27500	For complete testing
Cl-14(Marking)	-	27500	For complete testing

04 Dec, 2028

-
Included w.e.f 30.05.2025

3094

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17155 (2019)

Tricycle, single hand propelled (?Right?/?Left?) (?Junior Size?) ? specification

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(NOMENCLATURE)	-	1000	-
4(The typical shape and dimensions)	-	1000	-
5.1(Tubing)	-	1000	-
5.2(Seat)	-	1000	-
5.2(Standard tricycle components)	-	1000	-
5.3.1(Seat)	-	1000	-
5.3.1(Expanded vinyl coated fabrics)	-	1000	-
5.3.2(Back rest thickness)	-	1000	-
5.3.2(Expanded vinyl coated fabrics)	-	1000	-
5.4.1(Foot rest)	-	1000	-
5.4.2(Seat walls)	-	1000	-
5.4.2(mild steel CRA sheet grade ‘0’)	-	1000	-
5.4.3(Tool box)	-	500	-
5.5(Spring wire)	-	500	-
5.6(Other metallic components)	-	1000	-
5.7(Timber)	-	2500	-
5.8(Bearing Balls)	-	500	-
6.1(Frame)	-	500	-
6.2(Steering handle Bar)	-	500	-
6.3(Tyres and Tubes)	-	1000	-
6.4(4 Wheel Rims)	-	500	-
6.4(Spokes diameter)	-	500	-
6.5(Mudguards)	-	500	-
6.6(Brake)	-	500	-
6.7(Sprocket and free wheel)	-	1000	-
6.8(Front wheel hub)	-	1000	-
6.9(Rear wheel hub)	-	2000	-
6.1(Drive Chain)	-	1000	-
6.11(Tool Box)	-	500	-
6.12(Lubrication)	-	500	-
6.13(Suitable means)	-	1000	-
6.14(Accessories)	-	500	-
6.15(Servicing and adjustment)	-	1000	-
7.1(Frame of the tricycle and mudguards, prior to assembly)	-	500	-
7.2(All the metallic parts)	-	500	-
7.2(All the metallic parts)	-	500	-
8.1(Road Test)	-	2500	-
8.2(Maneuverabilit)	-	2500	-
8.3(Static Load Test)	-	2500	-
8.4(Brake test)	-	2500	-
8.5(Test for finish)	-	500	-
9.1(The tricycle shall be marked)	-	100	-
10(Packing)	-	100	-
4(Shape and Dimension)	-	1000	-
5.1(Tubing)	-	1000	-
5.2(Standard tricycle components)	-	1000	-
5.3(Seat and Back test)	-	1000	-
5.4(Footrest, Seat Walls & Tool box)	-	1000	-
5.5(Spring wire)	-	1000	-
5.7(Timber)	-	1000	-
5.8(Bearing Balls)	-	1000	-
6.1(Frame)	-	1000	-
6.2(Steering handle Bar)	-	500	-
6.3(Tyres and Tubes)	-	1000	-
6.4(Wheel Rims)	-	500	-
6.4(Spokes diameter)	-	500	-
6.5(Mudguards)	-	500	-
6.6(Brake)	-	500	-
6.7(Sprocket and free wheel)	-	1000	-
6.8(Front wheel hub)	-	1000	-
6.9(Rear wheel hub)	-	2000	-
6.1(Drive Chain)	-	500	-
6.11(Tool Box)	-	500	-
6.12(Lubrication)	-	500	-
6.14(Accessories)	-	100	-
6.15(Servicing and adjustment)	-	100	-
7(Finish)	-	500	-
8.1(Road Test)	-	2500	-
8.2(Maneuverability)	-	2500	-
8.3(Static Load Test)	-	2500	-
8.4(Brake test)	-	2500	-
8.5(Test for finish)	-	500	-
9(Marking)	-	500	-
3(NOMENCLATURE)	-	0	-
4(The typical shape and dimensions)	-	0	-
5.1(Tubing)	-	0	-
5.2(Seat)	-	0	-
5.2(Standard tricycle components)	-	0	-
5.3.1(Seat)	-	0	-
5.3.1(Expanded vinyl coated fabrics)	-	0	-
5.3.2(Back rest thickness)	-	0	-
5.3.2(Expanded vinyl coated fabrics)	-	0	-
5.4.1(Foot rest)	-	0	-
5.4.2(Seat walls)	-	0	-
5.4.2(mild steel CRA sheet grade ‘0’)	-	0	-
5.4.3(Tool box)	-	0	-
5.5(Spring wire)	-	0	-
5.6(Other metallic components)	-	0	-
5.7(Timber)	-	0	-
5.8(Bearing Balls)	-	0	-
6.1(Frame)	-	0	-
6.2(Steering handle Bar)	-	0	-
6.3(Tyres and Tubes)	-	0	-
6.4(4 Wheel Rims)	-	0	-
6.4(Spokes diameter)	-	0	-
6.5(Mudguards)	-	0	-
6.6(Brake)	-	0	-
6.7(Sprocket and free wheel)	-	0	-
6.8(Front wheel hub)	-	0	-
6.9(Rear wheel hub)	-	0	-
6.1(Drive Chain)	-	0	-
6.11(Tool Box)	-	0	-
6.12(Lubrication)	-	0	-
6.13(Suitable means)	-	0	-
6.14(Accessories)	-	0	-
6.15(Servicing and adjustment)	-	0	-
7.1(Frame of the tricycle and mudguards, prior to assembly)	-	0	-
7.2(All the metallic parts)	-	0	-
7.2(All the metallic parts)	-	0	-
8.1(Road Test)	-	0	-
8.2(Maneuverabilit)	-	0	-
8.3(Static Load Test)	-	0	-
8.4(Brake test)	-	0	-
8.5(Test for finish)	-	0	-
9.1(The tricycle shall be marked)	-	0	-
10(Packing)	-	0	-
4(Shape and Dimension)	-	0	-
5.1(Tubing)	-	0	-
5.2(Standard tricycle components)	-	0	-
5.3(Seat and Back test)	-	0	-
5.4(Footrest, Seat Walls & Tool box)	-	0	-
5.5(Spring wire)	-	0	-
5.7(Timber)	-	0	-
5.8(Bearing Balls)	-	0	-
6.1(Frame)	-	0	-
6.2(Steering handle Bar)	-	0	-
6.3(Tyres and Tubes)	-	0	-
6.4(Wheel Rims)	-	0	-
6.4(Spokes diameter)	-	0	-
6.5(Mudguards)	-	0	-
6.6(Brake)	-	0	-
6.7(Sprocket and free wheel)	-	0	-
6.8(Front wheel hub)	-	0	-
6.9(Rear wheel hub)	-	0	-
6.1(Drive Chain)	-	0	-
6.11(Tool Box)	-	0	-
6.12(Lubrication)	-	0	-
6.14(Accessories)	-	0	-
6.15(Servicing and adjustment)	-	0	-
7(Finish)	-	0	-
8.1(Road Test)	-	0	-
8.2(Maneuverability)	-	0	-
8.3(Static Load Test)	-	0	-
8.4(Brake test)	-	0	-
8.5(Test for finish)	-	0	-
9(Marking)	-	0	-

26 Jul, 2027

-
Included w.e.f.28.07.2025

3095

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1()	-	10000	-
4.1(Construction)	-	10000	-
4.2(Materials)	-	10000	-
4.3(Selection and Size)	-	10000	-
4.4(Position of handle and knob with respect to cookware)	-	10000	-
4.()	-	10000	-
4.5(Attachment to cookware)	-	10000	-
4.()	-	10000	-
5.1(General)	-	10000	-
5.2(Bending strength)	-	10000	-
5.3(Torque strength)	-	10000	-
5.4(Impact strength)	-	10000	-
5.5(Fatigue resistance)	-	10000	-
5.6(Leakage)	-	10000	-
5.7(Thermal insulation)	-	10000	-
5.8(Heat resistance)	-	10000	-
5.9(Washing resistance)	-	10000	-
5.10(Burning resistance)	-	10000	-

13 May, 2028

-
Included w.e.f.30.05.2025

3096

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 14625 (2015)

Plastics Feeding Bottles ( First Revision )

20800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Physical Requirements)	-	1000	-
Cl 5.1.3(Wall Thickness)	-	2000	-
Cl 5.1.4(Capacity)	-	1500	-
Cl 5.3.2(Transparecy)	-	2000	-
Cl 5.3.3(Leakage Test)	-	2000	-
Cl 5.3.4(Drop Test)	-	2000	-
Cl 5.3.5(Ageing Resistance)	-	2000	-
Cl 5.3.6(Compressive Deformation Resistance)	-	2000	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	2000	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Antimony)	-	4500	Table 1, S.no (i) to (viii)- Rs 4500/-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Arsenic)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Chromium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Mercury)	-	0	-
4.1(Material Identification, Bisphenol A,)	-	4000	-
4.2(Rubber Teats for Feeding bottle shall conform to IS 3565 (Workmanship and Finish, Acetone Extract, Free sulphur in Acetone Extract, Change in Physical property, Properties of Water Extract, pH of the Water Extract, Tension Set ))	-	0	-
5.1.1(Description, Design, shape & dimensions)	-	1000	-
5.3.1(Environmental Stress Crack Resistance,)	-	2000	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	5500	Cl. 5.3.9 table 3 s.no. (i) to (ix)- Rs 5500/-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Cadmium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Lead)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Barium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Selenium)	-	0	-
Cl 5.1.4.2 (a)(Test for permanency of Pigment)	-	1500	-
5.3.8 a)(Migration Test a) Distilled water at 40±2° hrs)	-	2500	Cl. 5.3.8 (a) and (b)- total Rs 2500/-
5.3.8 b)(Migration Test b) n-Haptane at 38±1° C for 30 min)	-	0	-
5.1.2(Manufacture, workmanship finish & appearance)	-	1500	-
Clause 5.3.1(Environmental Stress crack resistance)	-	0	-
Clause 5.1.4.2(Capacity Scale)	-	0	-
Clause 5.1.2.2(Workmanship.Finish and Appearance)	-	0	-
Clause 5.1.1 (Description)	-	0	-
Clause 4.2 (Teats)	-	0	IS 14625-Total 20800 Rs/- exclude IS 3565
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.1.3(Wall Thickness at Top, Middle & Bottom ( Take every position 4 measurment and average will be reported))	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	0	-
Cl.5.2.1.7, Table-1(i)(Migration of certain elements, Reqiurement as per table 1, Arsenic)	-	0	-
Cl.5.2.1.7, Table-1(ii)(Migration of certain elements, Reqiurement as per table 1, Chromium)	-	0	-
Cl.5.2.1.7, Table-1(iii)(Migration of certain elements, Reqiurement as per table 1, Mercury)	-	0	-
Cl.5.2.1.7, Table-1(iv)(Migration of certain elements, Reqiurement as per table 1, Cadmium)	-	0	-
Cl.5.2.1.7, Table-1(v)(Migration of certain elements, Reqiurement as per table 1, Lead)	-	0	-
Cl.5.2.1.7, Table-1(vi)(Migration of certain elements, Reqiurement as per table 1, Barium)	-	0	-
Cl.5.2.1.7, Table-1(vii)(Migration of certain elements, Reqiurement as per table 1, Selenium)	-	0	-
Cl.5.3.8(Migration test a)Distilled water)	-	0	-
Cl.5.3.8(Migration test a)n-Heptane)	-	0	-
Cl.5.3.9.2, Table-3(i)(Specific migration , Barium)	-	0	-
Cl.5.3.9.2, Table-3(ii)(Specific migration , Cobalt)	-	0	-
Cl.5.3.9.2, Table-3(iii)(Specific migration , Copper)	-	0	-
Cl.5.3.9.2, Table-3(iv)(Specific migration , Iron)	-	0	-
Cl.5.3.9.2, Table-3(v)(Specific migration , Lithium)	-	0	-
Cl.5.3.9.2, Table-3(vi)(Specific migration , Manganese)	-	0	-
Cl.5.3.9.2, Table-3(vii)(Specific migration , Zinc)	-	0	-
Cl.5.3.9.2, Table-3(viii)(Specific migration , Antimony)	-	0	-
Clause 5.2.1.7, S.No.(i)(Heavy metal,Antimony)	-	0	-
Clause 5.2.1.7, S.No.(ii)(Heavy metal,Arsenic)	-	0	-
Clause 5.2.1.7, S.No.(iii)(Heavy metal,Chromium)	-	0	-
Clause 5.2.1.7, S.No.(iv)(Heavy metal,Mercury)	-	0	-
Clause 5.2.1.7, S.No.(v)(Heavy metal,Cadmium)	-	0	-
Clause 5.2.1.7, S.No.(vi)(Heavy metal,Lead)	-	0	-
Clause 5.2.1.7, S.No.(vii)(Heavy metal,Barium)	-	0	-
Clause 5.2.1.7, S.No.(viii)(Heavy metal,Selenium)	-	0	-
Cl-5.2.1.2.2(pH meter)	-	0	-
Cl-5.2.1.2.3(Membrane filter)	-	0	-
Cl-5.2.1.2.4(Centrifuge)	-	0	-
Cl-5.2.1.3(Reagents)	-	0	-
Cl-5.2.1.3.1(Hydrochloric acid solution)	-	0	-
Cl-5.2.1.3.2(Hydrochloric acid solution)	-	0	-
Cl-7(Packing and Marking)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Antimony)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Arsenic)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Chromium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Mercury)	-	0	-
4.1(Material Identification, Bisphenol A,)	-	0	-
4.2(Rubber Teats for Feeding bottle shall conform to IS 3565 (Workmanship and Finish, Acetone Extract, Free sulphur in Acetone Extract, Change in Physical property, Properties of Water Extract, pH of the Water Extract, Tension Set ))	-	0	-
5.1.1(Description, Design, shape & dimensions)	-	0	-
5.3.1(Environmental Stress Crack Resistance,)	-	0	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Cadmium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Lead)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Barium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Selenium)	-	0	-
Cl 5.1.4.2 (a)(Test for permanency of Pigment)	-	0	-
5.3.8 a)(Migration Test a) Distilled water at 40±2° hrs)	-	0	-
5.3.8 b)(Migration Test b) n-Haptane at 38±1° C for 30 min)	-	0	-
5.1.2(Manufacture, workmanship finish & appearance)	-	0	-
Clause 5.3.1(Environmental Stress crack resistance)	-	0	-
Clause 5.1.4.2(Capacity Scale)	-	0	-
Clause 5.1.2.2(Workmanship.Finish and Appearance)	-	0	-
Clause 5.1.1 (Description)	-	0	-
Clause 4.2 (Teats)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.1.3(Wall Thickness at Top, Middle & Bottom ( Take every position 4 measurment and average will be reported))	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	0	-
Cl.5.2.1.7, Table-1(i)(Migration of certain elements, Reqiurement as per table 1, Arsenic)	-	0	-
Cl.5.2.1.7, Table-1(ii)(Migration of certain elements, Reqiurement as per table 1, Chromium)	-	0	-
Cl.5.2.1.7, Table-1(iii)(Migration of certain elements, Reqiurement as per table 1, Mercury)	-	0	-
Cl.5.2.1.7, Table-1(iv)(Migration of certain elements, Reqiurement as per table 1, Cadmium)	-	0	-
Cl.5.2.1.7, Table-1(v)(Migration of certain elements, Reqiurement as per table 1, Lead)	-	0	-
Cl.5.2.1.7, Table-1(vi)(Migration of certain elements, Reqiurement as per table 1, Barium)	-	0	-
Cl.5.2.1.7, Table-1(vii)(Migration of certain elements, Reqiurement as per table 1, Selenium)	-	0	-
Cl.5.3.8(Migration test a)Distilled water)	-	0	-
Cl.5.3.8(Migration test a)n-Heptane)	-	0	-
Cl.5.3.9.2, Table-3(i)(Specific migration , Barium)	-	0	-
Cl.5.3.9.2, Table-3(ii)(Specific migration , Cobalt)	-	0	-
Cl.5.3.9.2, Table-3(iii)(Specific migration , Copper)	-	0	-
Cl.5.3.9.2, Table-3(iv)(Specific migration , Iron)	-	0	-
Cl.5.3.9.2, Table-3(v)(Specific migration , Lithium)	-	0	-
Cl.5.3.9.2, Table-3(vi)(Specific migration , Manganese)	-	0	-
Cl.5.3.9.2, Table-3(vii)(Specific migration , Zinc)	-	0	-
Cl.5.3.9.2, Table-3(viii)(Specific migration , Antimony)	-	0	-
Clause 5.2.1.7, S.No.(i)(Heavy metal,Antimony)	-	0	-
Clause 5.2.1.7, S.No.(ii)(Heavy metal,Arsenic)	-	0	-
Clause 5.2.1.7, S.No.(iii)(Heavy metal,Chromium)	-	0	-
Clause 5.2.1.7, S.No.(iv)(Heavy metal,Mercury)	-	0	-
Clause 5.2.1.7, S.No.(v)(Heavy metal,Cadmium)	-	0	-
Clause 5.2.1.7, S.No.(vi)(Heavy metal,Lead)	-	0	-
Clause 5.2.1.7, S.No.(vii)(Heavy metal,Barium)	-	0	-
Clause 5.2.1.7, S.No.(viii)(Heavy metal,Selenium)	-	0	-
Cl-5.2.1.2.2(pH meter)	-	0	-
Cl-5.2.1.2.3(Membrane filter)	-	0	-
Cl-5.2.1.2.4(Centrifuge)	-	0	-
Cl-5.2.1.3(Reagents)	-	0	-
Cl-5.2.1.3.1(Hydrochloric acid solution)	-	0	-
Cl-5.2.1.3.2(Hydrochloric acid solution)	-	0	-
Cl-7(Packing and Marking)	-	0	-

25 Feb, 2027

-
Included w.e.f 11.07.2025

3097

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2415 (2015)

Cycle - Rubber tubes (Moulded/ Jointed) - Specification (Fourth Revision)

14250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1(Classification and Designation)	-	14250	For complete testing
5.1,3.4, Annex A & Table 2.( Flat Length )	-	14250	For complete testing
5.1,3.5, Annex A & Table 2.(Flat Width)	-	14250	For complete testing
5.2, Annex A(Thickness)	-	14250	For complete testing
5.2.1(Uniformity of Thickness)	-	14250	For complete testing
6.1,Table 3(i)Tensile strength:)	-	14250	For complete testing
6.1,Table 3(ii)Elongation at break )	-	14250	For complete testing
6.2(iii)Tension set: )	-	14250	For complete testing
6.3 (a)( Ageing Test:- Tensile strength :)	-	14250	For complete testing
6.3(b)( Ageing Test :- Elongation at break)	-	14250	For complete testing
6.4.1(Joint Adhesion Strength)	-	14250	For complete testing
6.4.3( Strength of splice on moulded tube)	-	14250	For complete testing
6.5(Leak Test)	-	14250	For complete testing
6.6(Valve Test)	-	14250	For complete testing
6.7.1(Manufacture and Workmanship)	-	14250	For complete testing
6.7.2(Manufacture and Workmanship)	-	14250	For complete testing
6.7.3(Manufacture and Workmanship)	-	14250	For complete testing
6.7.4(Manufacture and Workmanship)	-	14250	For complete testing
7.1(MARKING)	-	14250	For complete testing
7.1(MARKING)	-	14250	For complete testing

04 Dec, 2028

-
Included w.e.f 30.05.2025

3098

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 16172 (2023)

Reinforcement Couplers for Mechanical Splices of Steel Bars in Concrete ? Specification (first revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification)	-	7500	For dimensional and other qualitative tests
6(Manufacture)	-	7500	For dimensional and other qualitative tests
7(Workmanship and Finish)	-	7500	For dimensional and other qualitative tests
8(Nominal Sizes)	-	7500	For dimensional and other qualitative tests
9.2.1(Tensile Strength)	-	10000	For mechanical tests
9.2.1.1(Disengagement test for threaded couplers)	-	10000	For mechanical tests
9.2.2(Percentage Elongation)	-	10000	For mechanical tests
9.3(Slip Test)	-	10000	For mechanical tests
9.4(Cyclic Tensile Test)	-	10000	For mechanical tests
9.5.1(Low cycle Fatigue Test)	-	10000	For mechanical tests
9.5.2(High Cycle Fatigue test)	-	10000	For mechanical tests
5(Classification)	-	0	-
6(Manufacture)	-	0	-
7(Workmanship and Finish)	-	0	-
8(Nominal Sizes)	-	0	-
9.2.1(Tensile Strength)	-	0	-
9.2.1.1(Disengagement test for threaded couplers)	-	0	-
9.2.2(Percentage Elongation)	-	0	-
9.3(Slip Test)	-	0	-
9.4(Cyclic Tensile Test)	-	0	-
9.5.1(Low cycle Fatigue Test)	-	0	-
9.5.2(High Cycle Fatigue test)	-	0	-

04 Dec, 2028

-
Included w.e.f.10.06.2025 Exclusion Cl 9.4 (Cyclic Tensile Test) Cl 9.5.1 (Low cycle Fatigue Test) Cl 9.5.2 (High Cycle Fatigue test)

3099

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 18340 (2023)

Vinyl Sulphone - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	500	-
Cl-3.2, Table-1 (i)(Assay (by nitrite value), percent by mass (on dry basis), Min)	-	5000	-
Cl-3.2, Table-1 (i)(Assay (by HPLC1)), percent area (on dry basis),Min)	-	8000	-
Cl-3.2, Table-1 (ii)(Hydrolysis value, percent by mass (on 100 percent basis), Min)	-	8000	-
Cl-3.2, Table-1 (iii)(Matter insoluble in sodium carbonate solution percent by mass, Max)	-	8000	-
Cl-3.2, Table-1 (iv)(4-Chloroaniline content, percent by mass (on 100 percent basis), Max)	-	8000	-
Cl-4.2(Marking)	-	500	-
Cl-3.1(Description)	-	0	-
Cl-3.2, Table-1 (i)(Assay (by nitrite value), percent by mass (on dry basis), Min)	-	0	-
Cl-3.2, Table-1 (i)(Assay (by HPLC1)), percent area (on dry basis),Min)	-	0	-
Cl-3.2, Table-1 (ii)(Hydrolysis value, percent by mass (on 100 percent basis), Min)	-	0	-
Cl-3.2, Table-1 (iii)(Matter insoluble in sodium carbonate solution percent by mass, Max)	-	0	-
Cl-3.2, Table-1 (iv)(4-Chloroaniline content, percent by mass (on 100 percent basis), Max)	-	0	-
Cl-4.2(Marking)	-	0	-

26 Jul, 2027

-
Included w.e.f.12.09.2025

3100

ATCC TEST LABS LLP

8172626

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	7000	-
Cl-9(Endurance fpr motor and base assembly)	-	1000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	1000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	1000	-
Cl-10.4(Idli Batter)	-	1000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	2000	-
Cl-13(Strength of Assembly)	-	3000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	2000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	3000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	2000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	2000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-

15 Jun, 2026

-
Included w.e.f 14.08.2025 Exclusion: Cl-19.11.4.1-Cl-19.11.4.7 (EMI/EMC)

3101

S.B.Steels Company, Bally

5120906

IS 9295 (2024)

STEEL TUBES FOR IDLERS FOR BELT CONVEYORS - SPECIFICATION (second revision)

10000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per clause 7.1.5(Sulphur)	-	500.00	-
As per clause 7.1.6(Phosphorus)	-	500.00	-
As per clause 8.1(Tensile Test)	-	500.00	-
As per clause 8.1.1(Yield Stress)	-	500.00	-
As per clause 8.1.2(Elongation)	-	500.00	-
As per clause 8.2(Drift Expansion Test)	-	500.00	-
As per clause 8.3(Flattening Test)	-	500.00	-
Cl-9.1, Table-2(Outside Diameter)	-	500.00	-
As per clause 10(Hardness Test)	-	500.00	-
As per clause 13(Dimension Tolerance)	-	2000.00	-
As per clause 14(Workmanship)	-	500.00	-
As per clause 15(Straightness)	-	500.00	-
As per clause 16(Length)	-	500.00	-
As per clause 17(Surface Protection)	-	500.00	-
As per Clause 5(Types /Grade and Designation)	-	500.00	-
As per clause 7.1.5(Sulphur)	-	500.00	-
As per clause 7.1.6(Phosphorus)	-	500.00	-
As per clause 8.1(Tensile Test)	-	1000.00	-
As per clause 8.1.1(Yield Stress)	-	1000.00	-
As per clause 8.1.2(Elongation)	-	1000.00	-
As per clause 8.2(Drift Expansion Test)	-	500.00	-
As per clause 8.3(Flattening Test)	-	500.00	-
Cl-9.1, Table-2(Outside Diameter)	-	500.00	-
As per clause 10(Hardness Test)	-	500.00	-
As per clause 13(Dimension Tolerance)	-	2000.00	-
As per clause 14(Workmanship)	-	500.00	-
As per clause 15(Straightness)	-	500.00	-
As per clause 16(Length)	-	500.00	-
As per clause 17(Surface Protection)	-	500.00	-
As per Clause 5(Types /Grade and Designation)	-	500.00	-
Cl-9.1, Table-2(Thickness)	-	500.00	-
Cl-9.1, Table-2(Mass)	-	500.00	-

06 Sep, 2027

-
Included w.e.f 03.06.2025

3102

Sleen India Biz venture Private Limited, Agra

9139736

IS 8698 (2022)

expanded vinyl coated fabrics-Specification Second Revision

Type A and Type B

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.1(Description)	-	500	-
Cl-7.2(Base Fabric)	-	500	-
Cl-7.3(Appearance)	-	500	-
Cl-7.4(Colour, Grain and Finish)	-	500	-
Cl-7.5(Coating)	-	500	-
Cl-7.6(Resistance to Heat and Loss of Mass on Heating)	-	1000	-
Cl-7.7(Resistance to Cold)	-	1000	-
Cl-7.8(Colour Fastness to Dry and Wet Rubbing)	-	500	-
Cl-7.9(Colour Fastness to Light)	-	500	-
Cl-7.10(Gelling Test)	-	500	-
Cl-7.11(Adhesion of Print)	-	500	-
Cl-7.12(Flame Resistance)	-	1000	-
Cl-7.13(Adhesion of Coating)	-	1000	-
Cl-7.14(Blocking Resistance)	-	1000	-
Cl-7.15(Resistance to Penetration of Water)	-	1000	-
Cl-7.16("Elongation and Elastic Recovery for a Constant Load")	-	1000	-
Cl-7.17, 8.1 Table-1 (i)(Usable width, Min, cm)	-	500	-
Cl-7.17, 8.1 Table-1 (ii)(Mass of finished fabric, Min, g/m2)	-	500	-
Cl-7.17, 8.1 Table-1 (iii)(a) Longitudinal direction)	-	1000	-
Cl-7.17, 8.1 Table-1 (iii)(b) Transverse direction)	-	0	Breaking strength test price is 1000/-.
Cl-7.17, 8.1 Table-1 (iv)(Tear strength)	-	1000	-
Cl-7.17, 8.1 Table-1 (v)(Resistance to damage by flexing)	-	500	-
Cl-8.2(Test Specimens)	-	300	-
Cl-9.2(Marking)	-	200	-
Cl-7.1(Description)	-	0	-
Cl-7.2(Base Fabric)	-	0	-
Cl-7.3(Appearance)	-	0	-
Cl-7.4(Colour, Grain and Finish)	-	0	-
Cl-7.5(Coating)	-	0	-
Cl-7.6(Resistance to Heat and Loss of Mass on Heating)	-	0	-
Cl-7.7(Resistance to Cold)	-	0	-
Cl-7.8(Colour Fastness to Dry and Wet Rubbing)	-	0	-
Cl-7.9(Colour Fastness to Light)	-	0	-
Cl-7.10(Gelling Test)	-	0	-
Cl-7.11(Adhesion of Print)	-	0	-
Cl-7.12(Flame Resistance)	-	0	-
Cl-7.13(Adhesion of Coating)	-	0	-
Cl-7.14(Blocking Resistance)	-	0	-
Cl-7.15(Resistance to Penetration of Water)	-	0	-
Cl-7.16("Elongation and Elastic Recovery for a Constant Load")	-	0	-
Cl-7.17, 8.1 Table-1 (i)(Usable width, Min, cm)	-	0	-
Cl-7.17, 8.1 Table-1 (ii)(Mass of finished fabric, Min, g/m2)	-	0	-
Cl-7.17, 8.1 Table-1 (iii)(a) Longitudinal direction)	-	0	-
Cl-7.17, 8.1 Table-1 (iii)(b) Transverse direction)	-	0	-
Cl-7.17, 8.1 Table-1 (iv)(Tear strength)	-	0	-
Cl-7.17, 8.1 Table-1 (v)(Resistance to damage by flexing)	-	0	-
Cl-8.2(Test Specimens)	-	0	-
Cl-9.2(Marking)	-	0	-
Cl-7.1(Description)	-	0	-
Cl-7.2(Base Fabric)	-	0	-
Cl-7.3(Appearance)	-	0	-
Cl-7.4(Colour, Grain and Finish)	-	0	-
Cl-7.5(Coating)	-	0	-
Cl-7.6(Resistance to Heat and Loss of Mass on Heating)	-	0	-
Cl-7.7(Resistance to Cold)	-	0	-
Cl-7.8(Colour Fastness to Dry and Wet Rubbing)	-	0	-
Cl-7.9(Colour Fastness to Light)	-	0	-
Cl-7.10(Gelling Test)	-	0	-
Cl-7.11(Adhesion of Print)	-	0	-
Cl-7.12(Flame Resistance)	-	0	-
Cl-7.13(Adhesion of Coating)	-	0	-
Cl-7.14(Blocking Resistance)	-	0	-
Cl-7.15(Resistance to Penetration of Water)	-	0	-
Cl-7.16("Elongation and Elastic Recovery for a Constant Load")	-	0	-
Cl-7.17, 8.1 Table-1 (i)(Usable width, Min, cm)	-	0	-
Cl-7.17, 8.1 Table-1 (ii)(Mass of finished fabric, Min, g/m2)	-	0	-
Cl-7.17, 8.1 Table-1 (iii)(a) Longitudinal direction)	-	0	-
Cl-7.17, 8.1 Table-1 (iii)(b) Transverse direction)	-	0	-
Cl-7.17, 8.1 Table-1 (iv)(Tear strength)	-	0	-
Cl-7.17, 8.1 Table-1 (v)(Resistance to damage by flexing)	-	0	-
Cl-8.2(Test Specimens)	-	0	-
Cl-9.2(Marking)	-	0	-

15 May, 2027

-
Included w.e.f.23.06.2025

3103

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	45000	Extra EMI/EMC charges: 1,80,000
7(Marking and instructions)	-	45000	Extra EMI/EMC charges: 1,80,000
8(Protection against live parts)	-	45000	Extra EMI/EMC charges: 1,80,000
10(POWER INPUT AND CURRENT)	-	45000	Extra EMI/EMC charges: 1,80,000
11(HEATING)	-	45000	Extra EMI/EMC charges: 1,80,000
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	45000	Extra EMI/EMC charges: 1,80,000
14(IMPULSE VOLTAGE TEST)	-	45000	Extra EMI/EMC charges: 1,80,000
15(HUMIDITY TREATMENT TEST)	-	45000	Extra EMI/EMC charges: 1,80,000
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	45000	Extra EMI/EMC charges: 1,80,000
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	45000	Extra EMI/EMC charges: 1,80,000
19(ABNORMAL OPERATION)	-	45000	Extra EMI/EMC charges: 1,80,000
20(STABILITY AND MECHANICAL HAZARDS)	-	45000	Extra EMI/EMC charges: 1,80,000
21(MECHANICAL STRENGTH)	-	45000	Extra EMI/EMC charges: 1,80,000
22(CONSTRUCTION)	-	45000	Extra EMI/EMC charges: 1,80,000
23(INTERNAL WIRING)	-	45000	Extra EMI/EMC charges: 1,80,000
24(COMPONENTS)	-	45000	Extra EMI/EMC charges: 1,80,000
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	45000	Extra EMI/EMC charges: 1,80,000
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	45000	Extra EMI/EMC charges: 1,80,000
27(PROVISION FOR EARTHING)	-	45000	Extra EMI/EMC charges: 1,80,000
28(SCREWS AND CONNECTIONS)	-	45000	Extra EMI/EMC charges: 1,80,000
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	45000	Extra EMI/EMC charges: 1,80,000
30(RESISTANCE TO HEAT AND FIRE)	-	45000	Extra EMI/EMC charges: 1,80,000
31(RESISTANCE TO RUSTING)	-	45000	Extra EMI/EMC charges: 1,80,000
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	45000	Extra EMI/EMC charges: 1,80,000
Cl-19.11.4.1(Electrostatic discharge)	-	180000	-
Cl-19.11.4.2(Radiated Fields)	-	180000	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	180000	-
Cl-19.11.4.3(Fast transient bursts)	-	180000	-
Cl-19.11.4.4(Surge Immunity test)	-	180000	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	180000	-
Cl-19.11.4.7(Harmonics)	-	180000	-
18(ENDURANCE)	-	45000	Extra EMI/EMC charges: 1,80,000
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
22.32(Oxygen bomb for rubber material)	-	45000	Extra EMI/EMC charges: 1,80,000
22.46(Software)	-	45000	Extra EMI/EMC charges: 1,80,000

08 May, 2028

-
Included w.e.f.19.06.2025

3104

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

TABLE 1 DIM AS PER TABLE 5 TO12

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	2000	-
9.3, Table 3 (Yield Strength, Mpa)	-	2000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	1500	-
9.3, Table 3 (Elongation, %)	-	1000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	2000	-
11(Surface finish)	-	1000	-
12(Dimensions)	-	2500	-
14.1(Thickness,mm)	-	1000	-
14.2( Width, mm)	-	1000	-
14.3(Length, mm)	-	500	-
14.4(Flatness, mm)	-	1000	-
14.5(Camber, mm)	-	1000	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	0	REPEATED CLAUSE
17(Marking)	-	500	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	0	REPEATED CLAUSE
4.1(General requirements)	-	0	REPEATED CLAUSE
6(Freedom from defects)	-	0	REPEATED CLAUSE
7(Heat treatment)	-	100	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	0	REPEATED CLAUSE
9.1(Sample plan)	-	0	REPEATED CLAUSE
9.2(Tensile test)	-	0	REPEATED CLAUSE
9.3(Mechanical properties)	-	0	REPEATED CLAUSE
9.4(Erichsen cupping test)	-	0	REPEATED CLAUSE
10(Retests)	-	0	REPEATED CLAUSE
11(Surface finish)	-	0	REPEATED CLAUSE
12(Dimensions)	-	0	REPEATED CLAUSE
13(Edge condition)	-	500	-
14.1(Thickness)	-	0	REPEATED CLAUSE
14.2.1(Mill Edge)	-	500	-
14.2.2(Trimmed Edge)	-	500	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	0	REPEATED CLAUSE
14.3(Length)	-	0	REPEATED CLAUSE
14.4(Flatness)	-	0	REPEATED CLAUSE
14.5(Camber)	-	0	REPEATED CLAUSE
15(Inspection)	-	0	REPEATED CLAUSE
17(Marking)	-	0	REPEATED CLAUSE

30 Mar, 2027

-
Included w.e.f 30.05.2025

3105

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	20000	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	20000	-
11(Transverse Tension Test,%)	-	20000	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	20000	-
13 (Table No.- 7)(Flaring Test)	-	20000	-
14(Flattaning Test-IS 2328)	-	20000	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	20000	-
17(Leak Tighteness Test)	-	20000	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	20000	-
19(Eddy current test & Air under water)	-	20000	-
21(Workmanship, Finish and Appearance)	-	20000	-
22(Repair by Welding or Grinding)	-	20000	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	20000	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	20000	-
Clause 10.1 - Table 4(Tensile Strength)	-	20000	-
Clause 10.1 - Table 4(Percent Elongation)	-	20000	-
Clause 11(Transverse Tension Test)	-	20000	-
Clause 12(Hardness Test)	-	20000	-
Clause 13(Flaring Test)	-	20000	-
Clause 14(Flattening Test)	-	20000	-
Clause 15(Grain Size)	-	20000	-
Clause 17(Leak Tightness Test)	-	20000	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	20000	-
Clause 21(Workmanship, Finish & Appearance)	-	20000	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	20000	-
10.2(Hardness test IS 1500 (part-1):2019)	-	20000	-
12.2(Flaring test IS 17878:2022)	-	20000	-
16(Sampling)	-	20000	-
24(Marking)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	20000	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	20000	-
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	20000	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	20000	-
11(Transverse Tension Test,%)	-	20000	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	20000	-
13 (Table No.- 7)(Flaring Test)	-	20000	-
14(Flattaning Test-IS 2328)	-	20000	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	20000	-
17(Leak Tighteness Test)	-	20000	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	20000	-
19(Eddy current test & Air under water)	-	20000	-
21(Workmanship, Finish and Appearance)	-	20000	-
22(Repair by Welding or Grinding)	-	20000	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	20000	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	20000	-
Clause 10.1 - Table 4(Tensile Strength)	-	20000	-
Clause 10.1 - Table 4(Percent Elongation)	-	20000	-
Clause 11(Transverse Tension Test)	-	20000	-
Clause 12(Hardness Test)	-	20000	-
Clause 13(Flaring Test)	-	20000	-
Clause 14(Flattening Test)	-	20000	-
Clause 15(Grain Size)	-	20000	-
Clause 17(Leak Tightness Test)	-	20000	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	20000	-
Clause 21(Workmanship, Finish & Appearance)	-	20000	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	20000	-
10.2(Hardness test IS 1500 (part-1):2019)	-	20000	-
12.2(Flaring test IS 17878:2022)	-	20000	-
16(Sampling)	-	20000	-
24(Marking)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	20000	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	20000	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	20000	-

13 May, 2028

-
Included w.e.f.02.06.2025

3106

Vimta Labs Limited, Bengaluru

6164216

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

32900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	350	-
Cl-5.2.2(Coliform)	-	300	-
Cl-5.2.3(Staphylococcus aureus)	-	600	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	500	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	500	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	600	-
Cl-5.2.7(Yeast and mould)	-	300	-
Cl-5.2.8(Salmonella)	-	600	-
Cl-5.2.9(Vibrio cholera)	-	600	-
Cl-5.2.3(Faecal streptococci)	-	600	-
Cl-5.2.8(shigella)	-	600	-
Cl-5.2.9(V.parahaemolyticus)	-	600	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	600	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	300	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	300	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	300	-
Cl-5.3, Table-1 (vi)(pH)	-	300	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	500	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	500	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	500	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	500	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	400	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	400	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	400	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	400	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	500	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	500	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	400	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	400	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	400	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	400	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	400	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	400	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	400	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	250	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	750	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	1500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	1500	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	750	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	500	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	500	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	500	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	500	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	500	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	500	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	500	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	500	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	500	-
Cl-5.3, Table-3 (x)(Uranium)	-	500	-
Table 3, x)(Uranium)	-	500	-
5.4/Annex D/i(P,P-DDT)	-	1000	-
5.4/Annex D/ii(Lindane)	-	1000	-
5.4/Annex D/iv(b-Endosulfan)	-	1000	-
5.4/Annex D/xvi(Dieldrin)	-	1000	-
5.4/Annex D/i(O,P-DDT)	-	1000	-
5.4/Annex D/iv(a-Endosulfan)	-	1000	-
5.4/Annex D/iii(d-HCH)	-	1000	-
5.4/Annex D/i(O,P-DDD)	-	1000	-
5.4/Annex D/i(P,P-DDE)	-	1000	-
5.4/Annex D/i(O,P-DDE)	-	1000	-
5.4/Annex D/iii(a-HCH)	-	1000	-
5.4/Annex D/iii(β- HCH)	-	1000	-
5.4/Annex D/iv(Endosulfan sulfate)	-	1000	-
5.4/Annex D/i(P,P-DDD)	-	1000	-
5.4/Annex D/xii(Alachlor)	-	1000	-
5.4/Annex D/vii(Chlorpyrifos)	-	1000	-
5.4/Annex D/x(Butachlor)	-	1000	-
5.4/Annex D/vi(Ethion)	-	1000	-
5.4/Annex D/xiv(Methyl parathion)	-	1000	-
5.4/Annex D/xv(Malathion)	-	1000	-
5.4/Annex D/viii(Phorate)	-	1000	-
5.4/Annex D/v(Monochrotophos)	-	1000	-
5.4/Annex D/xiii(Atrazine)	-	1000	-
5.4/Annex D/viii(Phorate sulphoxide)	-	1000	-
5.4/Annex D/viii(Phorate sulfone)	-	1000	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	1000	-
5.4/Annex D/xxviii(Malaoxon)	-	1000	-
5.4/Annex D/xi(Isoproturon)	-	1000	-
5.4/Annex D/ix(2,4 –D)	-	1000	-
5.4/Annex D/xvi(Aldrin)	-	1000	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
5.3(Appearance)	-	200	-
5.3/Table 2/xiii(Suphate)	-	400	-
5.4 i)(Dieldrin)	-	1000	-
5.4 i)(Aldrin)	-	1000	-
5.4 i)(Malathion)	-	1000	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	1000	-
5.4 i)(Methyl Paraoxon)	-	1000	-
5.4 i)(Methyl Parathion)	-	1000	-
5.4 i)(Atrazine)	-	1000	-
5.4 i)(Alachlor)	-	1000	-
5.4 i)(Isoproturon)	-	1000	-
5.4 i)(Butachlor)	-	1000	-
5.4 i)(2,4-D)	-	1000	-
5.4 i)(Phorate sulphone)	-	1000	-
5.4 i)(Phorate sulphoxide)	-	1000	-
5.4 i)(Phorate)	-	1000	-
5.4 i)(Chlorpyrifos)	-	1000	-
5.4 i)(Ethion)	-	1000	-
5.4 i)(Monocrotophos)	-	1000	-
5.4 i)(Endosulfan Sulphate)	-	1000	-
5.4 i)(beta-Endosulfan)	-	1000	-
5.4 i)(alpha-Endosulfan)	-	1000	-
5.4 i)(Delta-HCH)	-	1000	-
5.4 i)(beta-HCH)	-	1000	-
5.4 i)(alpha-HCH)	-	1000	-
5.4 i)(Gamma-HCH (Lindane))	-	1000	-
5.4 i)(p,p DDD)	-	1000	-
5.4 i)(o,p DDD)	-	1000	-
5.4 i)(p,p DDE)	-	1000	-
5.4, i)(o,p DDE)	-	1000	-
5.4 i)(p,p DDT)	-	1000	-
5.4 i)(o,p DDT)	-	1000	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	6500	-
Cl-5.4 (ii)(Total pesticide residue)	-	6500	-
Cl-5.1(General Requirements)	-	15850	-

15 Oct, 2025

-
Included w.e.f 04.07.2025 Exclusion: Cl 5.3 Table 4(i) Alpha emitter (ii) Beta emitter

3107

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	20000	-
5.2(Message Readability)	-	20000	-
6(Marking)	-	20000	-
"Cl.6.1 "(Marking)	-	20000	-
"Cl.6.2 "(BIS Certification Marking)	-	20000	-
4(Requirements)	-	20000	-
5(Tests)	-	20000	-
6(Marking)	-	20000	-

08 May, 2028

-
Included w.e.f.30.05.2025

3108

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 9997 (2023)

ALUMINIUM ALLOY REDRAW RODS FOR ELECTRICAL PURPOSES - SPECIFICATION

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(General requirements)	-	14800	For complete testing
Cl-5.2(Redraw rods)	-	14800	For complete testing
Cl-6(Manufacture)	-	14800	For complete testing
Cl-7.1, Table-2 (i)(Silicon)	-	14800	For complete testing
Cl-7.1, Table-2 (ii)(Iron)	-	14800	For complete testing
Cl-7.1, Table-2 (iii)(Copper)	-	14800	For complete testing
Cl-7.1, Table-2 (iv)(Manganese)	-	14800	For complete testing
Cl-7.1, Table-2 (v)(Magnesium)	-	14800	For complete testing
Cl-7.1, Table-2 (vi)(Chromium)	-	14800	For complete testing
Cl-7.1, Table-2 (vii)(Zinc)	-	14800	For complete testing
Cl-7.1, Table-2 (viii)(Boron)	-	14800	For complete testing
Cl-7.1, Table-2 (ix)(Vanadium + Titanium)	-	14800	For complete testing
Cl-7.1, Table-2 (x)(Other each)	-	14800	For complete testing
Cl-7.1, Table-2 (xi)(Others total)	-	14800	For complete testing
Cl-7.1, Table-2 (xii)(Aluminium)	-	14800	For complete testing
Cl-8.1, Table-3(UTS (MPa))	-	14800	For complete testing
Cl-8.1, Table-3(Elongation (%) - On 250 mm gauge length)	-	14800	For complete testing
Cl-8.1, Table-3(Resistivity (micro ohm.cm) at 20 oC)	-	14800	For complete testing
Cl-8.1, Table-3(Conductivity (%) (IACS))	-	14800	For complete testing
Cl-9(Electrical resistivity)	-	14800	For complete testing
Cl-10(Diameter and Permissible Variations)	-	14800	For complete testing
Cl-11(Joints)	-	14800	For complete testing
Cl-12(Finish and freedom from defects)	-	14800	For complete testing
Cl-16(Marking)	-	14800	For complete testing

04 Dec, 2028

-
Included w.e.f 30.05.2025

3109

Sleen India Biz venture Private Limited, Agra

9139736

IS 8699 (1977)

Specification for pvc coated fabrics for footwear industry

Type A/Type B

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1 and 4.1, Table - 1 (ii)(Total Mass)	-	500	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Warp direction)	-	1000	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Weft direction)	-	0	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage I ")	-	1000	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage II ")	-	0	-
3.1.1 and 4.1, Table - 1 (v)(Thickness)	-	500	-
4.2(Appearance)	-	500	-
4.3(Colour , Grain, Embossing and finish)	-	500	-
4.4.1(Resistance to cold)	-	1000	-
4.4.2(Colour fastness to Dry and Wet Rubbing)	-	1000	-
4.4.3(Colour fastness to light)	-	1000	-
4.4.4(Resistance to heat and loss of mass of coating on heating)	-	1000	-
4.4.5(Stability at Vulcanization Temperature)	-	1000	-
4.5(Resistance to Gelling)	-	1000	-
4.5.1(Embossing on Grain)	-	500	-
4.6(Adhesion of print (for Printed PVC Coated fabrics))	-	1000	-
4.7(Adhesion of coating)	-	1000	-
3.1.1 and 4.1, Table - 1 (ii)(Total Mass)	-	0	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Warp direction)	-	0	-
3.1.1 and 4.1, Table - 1 (iii)(Breaking Strength Weft direction)	-	0	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage I ")	-	0	-
3.1.1 and 4.1, Table - 1 (iv)("Resistance to damage by flexing Stage II ")	-	0	-
3.1.1 and 4.1, Table - 1 (v)(Thickness)	-	0	-
4.2(Appearance)	-	0	-
4.3(Colour , Grain, Embossing and finish)	-	0	-
4.4.1(Resistance to cold)	-	0	-
4.4.2(Colour fastness to Dry and Wet Rubbing)	-	0	-
4.4.3(Colour fastness to light)	-	0	-
4.4.4(Resistance to heat and loss of mass of coating on heating)	-	0	-
4.4.5(Stability at Vulcanization Temperature)	-	0	-
4.5(Resistance to Gelling)	-	0	-
4.5.1(Embossing on Grain)	-	0	-
4.6(Adhesion of print (for Printed PVC Coated fabrics))	-	0	-
4.7(Adhesion of coating)	-	0	-
Cl-3.1.1, & 4.1 Table-1 (i)(Usable width, cm, Min)	-	0	-

15 May, 2027

-
Included w.e.f.23.06.2025

3110

Electrical Research and Development Association (ERDA), Vadodara, Gujarat

7101125

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

Ceiling fan, Duct fan, Partition fan, pedestal fan, Table fan

24340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	500	-
7.0(Classification)	-	0	-
8.0(Protection against access to live parts)	-	500	-
10.0(Input and Current)	-	500	-
11.0(Heating)	-	850	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
14.0(Transient Overvoltage)	-	6500	-
15.0(Moisture resistance)	-	2850	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
19.0(Abnormal Operation)	-	650	-
20.0(Stability and mechanical hazards)	-	500	-
21.0(Mechanical Strength)	-	1100	-
22.0(Construction)	-	550	-
23.0(Internal Wiring)	-	500	-
24.0(Components)	-	840	-
25.0(Supply Connection and External Flexible Cords)	-	1150	-
26.0(Terminals for external conductors)	-	500	-
27.0(Provision For Earthing)	-	500	-
28.0(Screws and Connections)	-	500	-
29.0(Creepage Distances and Clearances)	-	500	-
30.0(Resistance To Heat and Fire)	-	2850	-
31.0(Resistance To Rusting)	-	500	-
32.0(Radiation, Toxicity and Similar Hazards)	-	500	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
19.11.4.1(Electrostatic discharges)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.2(Radiated fields)	-	25000	If this test is applicable than additional test charges of Rs. 25000/- is applied over the total test charge of Rs. 24340/-
19.11.4.3(Fast transient bursts)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.4(Surge immunity test)	-	16000	If this test is applicable than additional test charges of Rs. 16000/- is applied over the total test charge of Rs. 24340/-
19.11.4.5(Immunity to conducted discharges)	-	9500	If this test is applicable than additional test charges of Rs. 9500/- is applied over the total test charge of Rs. 24340/-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	15800	If this test is applicable than additional test charges of Rs. 15800/- is applied over the total test charge of Rs. 24340/-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
19.11.4.1(Electrostatic discharges)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.2(Radiated fields)	-	25000	If this test is applicable than additional test charges of Rs. 25000/- is applied over the total test charge of Rs. 24340/-
19.11.4.3(Fast transient bursts)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.4(Surge immunity test)	-	16000	If this test is applicable than additional test charges of Rs. 16000/- is applied over the total test charge of Rs. 24340/-
19.11.4.5(Immunity to conducted discharges)	-	9500	If this test is applicable than additional test charges of Rs. 9500/- is applied over the total test charge of Rs. 24340/-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	15800	If this test is applicable than additional test charges of Rs. 15800/- is applied over the total test charge of Rs. 24340/-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
19.11.4.1(Electrostatic discharges)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.2(Radiated fields)	-	25000	If this test is applicable than additional test charges of Rs. 25000/- is applied over the total test charge of Rs. 24340/-
19.11.4.3(Fast transient bursts)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.4(Surge immunity test)	-	16000	If this test is applicable than additional test charges of Rs. 16000/- is applied over the total test charge of Rs. 24340/-
19.11.4.5(Immunity to conducted discharges)	-	9500	If this test is applicable than additional test charges of Rs. 9500/- is applied over the total test charge of Rs. 24340/-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	15800	If this test is applicable than additional test charges of Rs. 15800/- is applied over the total test charge of Rs. 24340/-

30 Nov, 2028

-
Included w.e.f 19.06.2025 Exclusion: Cl 19.11.4.7 (Harmonics)

3111

BIS, Eastern Regional Laboratory (ERL)

None

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

Please See Remerk View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Sack Type)	-
5.2.1 (Fabric)	-
5.2.2 (Linear density of tapes)	-
5.2.4 (Unlaminated fabric mass)	-
5.3.1.2.1 (Mass of nonwoven fabric in sandwich extrusion lamination)	-
5.4.1 (Sack)	-
5.4.1.1 (Centre seam)	-
5.4.1.2 (Bottom seam)	-
6.1.1, Table 1 (Inside length)	-
6.1.1, Table 1 (Inside width)	-
6.1.1, Table 1 (Gusset width)	-
6.1.1, Table 1 (Warp per dm)	-
6.1.1, Table 1 (Weft per dm)	-
6.1.1, Table 1 (Mass of laminated fabric)	-
6.2, Table 1 (Average breaking strength - Lengthwise)	-
6.2, Table 1 (Average elongation at break of fabric - Widthwise)	-
6.2, Table 1 (Breaking strength of bottom seam)	-
6.2, Table 1 (Breaking strength of centre seam)	-
6.2, Table 1 (Average elongation at break of fabric - Lengthwise)	-
6.2, Table 1 (Average elongation at break of fabric - Widthwise)	-
6.4 (Drop Impact Testing of Filled Sacks)	-
6.3 (Average breaking strength - Lengthwise after UV exposure)	-
6.3 (Average breaking strength - Widthwise after UV exposure)	-

-
Complete

3112

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 11557 (1986)

Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	500	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	9000	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	10000	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	10000	-
3.1(Packing)	-	250	-
3.2(Marking)	-	250	-
2.1(Description)	-	0	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	0	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	0	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	0	-
3.1(Packing)	-	0	-
3.2(Marking)	-	0	-
2.1(Description)	-	0	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	0	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	0	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	0	-
3.1(Packing)	-	0	-
3.2(Marking)	-	0	-

26 Jul, 2027

-
Included w.e.f.12.09.2025

3113

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

ALL

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	17000	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	17000	-
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	17000	-
6(Freedom from defects , IS 6911)	-	17000	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	17000	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	17000	-
10.3(Bend Test - IS 1599)	-	17000	-
11,Table 7(Erichsen cupping test-IS 10175)	-	17000	-
15(Surface Finish)	-	17000	-
17(Dimension and tolerance)	-	17000	-
10.1 Amd 2(Yeild Strength)	-	17000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	17000	-
10.1 Amd 2(Elongation)	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	17000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	17000	-
Clause 17 , Table 9 to Table 19(Camber)	-	17000	-
Table 1(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
10.1 Amd 2(Yeild Strength)	-	17000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	17000	-
10.1 Amd 2(Elongation)	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	17000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	17000	-
Clause 17 , Table 9 to Table 19(Camber)	-	17000	-
Table 1(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
10.1 Amd 2(Yeild Strength)	-	17000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	17000	-
10.1 Amd 2(Elongation)	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	17000	-
10.1 Amd 2(Yeild Strength)	-	17000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	17000	-
10.1 Amd 2(Yeild Strength)	-	17000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	17000	-
10.1 Amd 2(Elongation)	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	17000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	17000	-
Clause 17 , Table 9 to Table 19(Camber)	-	17000	-
Table 1(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	17000	-
4(Supply of Material)	-	17000	-
8(Heat Treatment)	-	17000	-
19(Marking)	-	17000	-
5(Manufacture)	-	17000	-
10.1 Amd 2(Yeild Strength)	-	17000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	17000	-
10.1 Amd 2(Elongation)	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	17000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	17000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	17000	-
Clause 17 , Table 9 to Table 19(Camber)	-	17000	-
Table 1(Alumium)	-	17000	-
Table 1, Amendment 2(Zirconium)	-	17000	-
Table 1, Amendment 2(Tungstun)	-	17000	-
Table 1, Amendment 2(Tungstun)	-	17000	-
Table 1, Amendment 2(Ce)	-	17000	-
Table 1, Amendment 2(Cobalt)	-	17000	-
Table 1, Amendment 2(Ta)	-	17000	-
5.1 - 1(Carbon)	-	17000	-
5.1 - 1(Sulphur)	-	17000	-
5.1 - 1(Phosphorus)	-	17000	-
5.1 - 1(Manganese)	-	17000	-
5.1 - 1(Silicon)	-	17000	-
5.1 - 1(Nitrogen)	-	17000	-
5.1 - 1(Copper)	-	17000	-
5.1 - 1(Titanium)	-	17000	-
5.1 - 1(Aluminium)	-	17000	-
5.1 - 1(Niobium)	-	17000	-
5.1 - 1(Nickel)	-	17000	-
5.1 - 1(Chromium)	-	17000	-
5.1 - 1(Molybdenum)	-	17000	-
6(Freedom from defect)	-	17000	-
10.1 - 4(Tensile Test)	-	17000	-
10.1 - 4(Yield strength)	-	17000	-
10.1 - 4(Elongation % on 50mm)	-	17000	-
10.2(Hardness Test)	-	17000	-
10.3(Bend Test)	-	17000	-
11(Erichsen Cupping Test)	-	17000	-
17(Dimension and tolerance)	-	17000	-
12(Corrosion resistance)	-	17000	-
5.1 - 1(Carbon)	-	17000	-
5.1 - 1(Sulphur)	-	17000	-
5.1 - 1(Phosphorus)	-	17000	-
5.1 - 1(Manganese)	-	17000	-
5.1 - 1(Silicon)	-	17000	-
5.1 - 1(Nitrogen)	-	17000	-
5.1 - 1(Copper)	-	17000	-
5.1 - 1(Titanium)	-	17000	-
5.1 - 1(Aluminium)	-	17000	-
5.1 - 1(Niobium)	-	17000	-
5.1 - 1(Nickel)	-	17000	-
5.1 - 1(Chromium)	-	17000	-
5.1 - 1(Molybdenum)	-	17000	-
6(Freedom from defect)	-	17000	-
10.1 - 4(Tensile Test)	-	17000	-
10.1 - 4(Yield strength)	-	17000	-
10.1 - 4(Elongation % on 50mm)	-	17000	-
10.2(Hardness Test)	-	17000	-
10.3(Bend Test)	-	17000	-
11(Erichsen Cupping Test)	-	17000	-
17(Dimension and tolerance)	-	17000	-
12(Corrosion resistance)	-	17000	-

13 May, 2028

-
Included w.e.f.30.05.2025

3114

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	50000	(Extra EMI/EMC charges: 1,80,000/-)
8.1.1(Protection against live parts in all positions)	-	50000	-
8.1.2(Protection against live parts in openings)	-	50000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	50000	-
8.1.4(Protection against live parts against protective impedance)	-	50000	-
10.1(Power input)	-	50000	-
10.2(Current input)	-	50000	-
11.1(General)	-	50000	-
11.2(General)	-	50000	-
11.3(Heating)	-	50000	-
13.1(General)	-	50000	-
13.2(Leakage current at operating temperature)	-	50000	-
13.3(Electric Strength at operating temperature)	-	50000	-
14(Transient Over Voltages)	-	50000	-
15.0(General)	-	50000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	50000	-
15.2(Spillage Test)	-	50000	-
15.3(Humidity Test)	-	50000	-
16.0(General)	-	50000	-
16.1(General)	-	50000	-
16.2(Leakage Current (after Clause 15))	-	50000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	50000	-
17(Over Load Protection of Transformers and associated circuits)	-	50000	-
19(Abnormal Operation)	-	230000	(Extra EMI/EMC charges: 1,80,000/-)
20(Stability test)	-	50000	-
21(Mechanical Strength Test)	-	50000	-
22(Construction verification related test)	-	50000	-
23(General)	-	50000	-
24(Components)	-	50000	-
25(Supply connection and external flexible cords)	-	50000	-
26(Terminals for external conductors)	-	50000	-
27(Provision for earthing)	-	50000	-
28(Screw test and connections)	-	50000	-
29(clearance, creepage distances and solid insulation)	-	50000	-
30.1(Ball pressure test)	-	50000	-
30.2(Glow Wire Test)	-	50000	-
30.2(Needle Flame Test)	-	50000	-
4(General requirement)	-	50000	-
16(Leakage current and electric strength)	-	50000	-
17(Overload protection of transformers and associated circuits)	-	50000	-
18(Endurance)	-	50000	-
8.1.5(Live parts of built-in appliances)	-	50000	-
11.4(Heating appliances)	-	50000	-
11.5(Motor-operated appliances)	-	50000	-
11.6(Combined appliances)	-	50000	-
11.7(Duration corresponding)	-	50000	-
11.8(Temperature rise)	-	50000	-
4(General Requirement)	-	50000	-
5(General conditions for tests)	-	50000	-
6(Classification- IS 302-1)	-	50000	-
9(Starting of motor operation test requirements and tests)	-	50000	-
31(Resistance to Rusting)	-	50000	-
32(Radiation Toxicity and Similar Hazards)	-	50000	-
19.11.4.1(Electrostatic discharges)	-	50000	-
19.11.4.2(Radiated fields)	-	50000	-
19.11.4.3(Fast transient bursts)	-	50000	-
19.11.4.4(Surge immunity test)	-	50000	-
19.11.4.5(Immunity to conducted discharges)	-	50000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	50000	-
19.11.4.7(Harmonics)	-	50000	-
18(Endurance Test requirements and tests)	-	50000	(Extra EMI/EMC charges: 1,80,000/-)

08 May, 2028

-
Included w.e.f.19.06.2025 "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

3115

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 14246 (2024)

CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision

ALL

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Steel Base)	-	5000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-4.2(Metallic Coating)	-	2000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-4.3(Organic Coating)	-	2000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-4.4(Dry Film Thickness)	-	2000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-4.5(Profiles)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-5(Classification of durability of organic coating)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-6.1(Sampling of Test Specimen)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-6.2.3(Bend Test)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-6.3.1(Pencil Hardness Test)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-6.4(Impact Resistance Test)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-6.5(Cross Hatch Test)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-6.6(Solvent Resistance Test)	-	4000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-6.7(Other Tests)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-7.3.1(Gloss)	-	2000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-7.3.2(Colour)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-8.1, Table-4 (i)(Undercut at scribed lines)	-	10000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-8.1, Table-4 (ii)(Corrosion of the base metal)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-8.1, Table-4 (iii)(Blistering)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-8.2 Table 5 (i)(Undercut at scribed lines)	-	10000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-8.2 Table 5 (ii)(Blistering)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-9.1(The nominal thickness of sheets)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-9.2(The case of strips)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-9.3(Mass of each pack)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-9.4.1(Tolerances on thickness sheets and strips)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-9.4.2(Width)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-9.4.3(Length)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-9.4.4(Mass)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-10.1(Camber)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-10.2(Deviation from Squareness (Out-of Square)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-10.3(Deviation from Flatness)	-	1000	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-14(Marking)	-	0	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Carbon)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Sulphur)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Phosphorus)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Manganese)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Nitrogen)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Silicon)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Aluminium)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Vanadium)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Niobium)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Copper)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Titanium)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
As per Cl.4.1(Boron)	-	500	35000/- for Class-1, 40000/- for Class-2, 45000/- for Class-3, 60000/- for class-4
Cl-4.1(Steel Base)	-	-	-
Cl-4.2(Metallic Coating)	-	-	-
Cl-4.3(Organic Coating)	-	-	-
Cl-4.4(Dry Film Thickness)	-	-	-
Cl-4.5(Profiles)	-	-	-
Cl-5(Classification of durability of organic coating)	-	-	-
Cl-6.1(Sampling of Test Specimen)	-	-	-
Cl-6.2.3(Bend Test)	-	-	-
Cl-6.3.1(Pencil Hardness Test)	-	-	-
Cl-6.4(Impact Resistance Test)	-	-	-
Cl-6.5(Cross Hatch Test)	-	-	-
Cl-6.6(Solvent Resistance Test)	-	-	-
Cl-6.7(Other Tests)	-	-	-
Cl-7.3.1(Gloss)	-	-	-
Cl-7.3.2(Colour)	-	-	-
Cl-8.1, Table-4 (i)(Undercut at scribed lines)	-	-	-
Cl-8.1, Table-4 (ii)(Corrosion of the base metal)	-	-	-
Cl-8.1, Table-4 (iii)(Blistering)	-	-	-
Cl-8.2 Table 5 (i)(Undercut at scribed lines)	-	-	-
Cl-8.2 Table 5 (ii)(Blistering)	-	-	-
Cl-9.1(The nominal thickness of sheets)	-	-	-
Cl-9.2(The case of strips)	-	-	-
Cl-9.3(Mass of each pack)	-	-	-
Cl-9.4.1(Tolerances on thickness sheets and strips)	-	-	-
Cl-9.4.2(Width)	-	-	-
Cl-9.4.3(Length)	-	-	-
Cl-9.4.4(Mass)	-	-	-
Cl-10.1(Camber)	-	-	-
Cl-10.2(Deviation from Squareness (Out-of Square)	-	-	-
Cl-10.3(Deviation from Flatness)	-	-	-
Cl-14(Marking)	-	-	-
As per Cl.4.1(Carbon)	-	-	-
As per Cl.4.1(Sulphur)	-	-	-
As per Cl.4.1(Phosphorus)	-	-	-
As per Cl.4.1(Manganese)	-	-	-
As per Cl.4.1(Nitrogen)	-	-	-
As per Cl.4.1(Silicon)	-	-	-
As per Cl.4.1(Aluminium)	-	-	-
As per Cl.4.1(Vanadium)	-	-	-
As per Cl.4.1(Niobium)	-	-	-
As per Cl.4.1(Copper)	-	-	-
As per Cl.4.1(Titanium)	-	-	-
As per Cl.4.1(Boron)	-	-	-

25 Feb, 2027

-
Included w.e.f 20.06.2025

3116

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 636 (2018)

Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision)

Type 1, Type 2 & Type 3

30500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1.1(Inner lining shall be of rubber or rubberized fabric lining which is generally smooth and practically free from pitting and other imperfections)	-	500	For Type 1 Rs. 25500/-, Type 2 Rs. 28500 & Type 3 Rs. 48500
Cl 6.1.2(Externally applied elastomeric coating or covering of the reinforcement, if present shall be generally smooth and practically free from pitting and other imperfections)	-	1000	-
Cl 6.1.3(The jacket shall be practically free from dirt, knots, lumps, irregularities of the yarn and other visible defects.)	-	500	-
Cl.6.2(The internal diameter of the hose shall be measured by a suitable conical plug gauge and shall conform to the specified diameter with a tolerance of plus 2 and minus 0.0 mm.)	-	1000	-
Cl.6.3(Unless specified otherwise, the standard length shall be 30 m. Unless otherwise specified, a tolerance of ± 2 percent shall be permitted on the length prescribed for the hose by the purchaser but the total of all lengths of hose supplied shall be not less than the total quantity specified by the purchaser.)	-	1000	-
Cl.6.4(The average mass of hose per meter of 2 m length, without couplings attached, shall not be more than that prescribed in Table 1. For the determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity for a period of at least 48 h and then shall be weighed under the same conditions.)	-	2000	-
Cl.6.5(For 30 m length of dry hose without couplings, the coil diameter shall not exceed 45 cm for Type 1, 50 cm for Type 2 and 55 cm for Type 3.)	-	1500	-
Cl.6.6(Each hose length shall be subjected to an internal hydraulic pressure of 23 kgf/cm² in accordance with 8.1 of IS 443 (Part 3) increasing the pressure at the rate not exceeding 10 kgf/cm² per min and maintaining it for 1 min. Within this 1 min, the hose shall neither develop any leakage or sweating, nor shall any thread in the jacket break.)	-	15000	-
Cl.6.7(A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached)	-	15000	-
Cl.6.8(There shall be no sign of leakage or rupture and no thread in the jacket shall break after retaining the internal hydraulic pressure of 23 kgf/cm2 for 30 seconds.)	-	15000	-
Cl.6.9(The increase in length shall not exceed 6 percent at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	1000	-
Cl.6.10(The increase in diameter shall not be more than 10% at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	1000	-
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	2000	-
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	2000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 1)(After ageing, there shall be no tackiness on the surface of lining or the surface of the cover. )	-	2000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 2)(shall meet the requirements. given in Cl.6.7 (A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached))	-	2000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	2000	-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	2000	-
Cl.6.12(When determined by the method described in Annex C, the average number of cycles completed before bursting of three test pieces, shall not be less than the value specified in Table 2.)	-	2500	-
Cl.6.13(When tested in accordance with Annex D, the amount of moisture absorbed shall not exceed 0.20 kg/m2 for Type 2 hoses and 0.02 kg/m2 for Type 3 hoses.)	-	2000	-
Cl.6.14(When tested by the method described in Annex E, none of the test samples shall burst at less than 8 s of the application of the hot cube for Type 2 and 20 s for Type 3 hose.)	-	5000	-
Cl.6.15 (1)(The length shall be laid horizontally and the central fully immersed portion of the hose shall be visually examined for any swelling of rubber, weathering and cracking in the rubber lining)	-	5000	-
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	5000	-
Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 2) Jet)	-	5000	-
Cl.6.16(When tested by the method prescribed in IS 443 (Part 1), the lining (for Types 1, 2 and 3) and cover (for Type 3 only) of the hose shall neither develop cracking nor crazing when seen under X2 magnification, except at the cut edges of the hose)	-	22000	For Cl.6.16 Ozone Resistance test Rs. 22000/-
Cl.6.17(When tested in accordance with Annex F, at a test temperature of, at a test temperature of 300 ± 10°C for Types 1 and 2, and 400 ± 10° C for Type 3, in none of the four tests shall the test piece show signs of leakage within 120 s from the application of the filament rod or on removal of this filament rod after the specified period)	-	15000	-
Cl.6.18(When tested in accordance with Annex H, the pressure loss per 23 m length shall not exceed the values specified in Table 3 at the specified flow rate and inlet pressure (Recommendations for pressure testing of hoses in service are given at Annex G).)	-	10000	-

08 May, 2028

-
Included w.e.f.19.05.2025

3117

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16362 (2024)

Geosynthetics - Geotextiles for Subsurface Drainage, Subgrade Separation, Subgrade Stabilization, Filtration and Erosion Control (In Hard Armor Systems) Applications - Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (a) (Type of geotextile)	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (b) (Roll length, m, Min)	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (c) (Roll width, m, Min)	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (d) (Grab strength, N, Min)	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (e) (Sewn seam strength, N, Min (see Note 1))	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (f) (Trapezoidal tear strength, N, Min)	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (g) (CBR puncture strength, N, Min)	-
Cl-5.2, 6.1.2, 6.2.3, 8.4, Table-1 (i) (h) (Abrasion strength)	-
Cl-5.2, 6.1.2, 8.4, Table-2, (ii) (Permittivity1), s-1, Min)	-
Cl-5.2, 6.1.2, 8.4, Table-2, (iii) (AOS2,3), mm, Max)	-
Cl-9 (Marking)	-

-
Except material and long term tests

3118

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	0	-
Cl-5(General Conditions for the tests)	-	0	-
Cl-6(Classification)	-	0	-
Cl-7(Marking)	-	2000	-
Cl-8(Safety Requirements)	-	5000	-
Cl-9(Endurance fpr motor and base assembly)	-	15000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	5000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	Testing charges included in Cl. 10.2
Cl-10.4(Idli Batter)	-	0	Testing charges included in Cl. 10.2
Cl-10.5(Operational Tests for Juicers)	-	0	Testing charges included in Cl. 10.2
Cl-11(Temperature Withstand Test for Bowl)	-	2000	-
Cl-12.1(Test for Switches)	-	3000	-
Cl-13(Strength of Assembly)	-	0	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	3000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	Testing charges included in Cl. 14.2
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	Testing charges included in Cl. 14.2

31 Dec, 2026

-
Included w.e.f.19.06.2025 Exclusion EMI/EMC test as per Cl. 19.11.4.1 to Cl 19.11.4.7

3119

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

-----

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2500	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	1500	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	1000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	3000	-
Cl. 22 302-2-32 : 1994(Construction )	-	1000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	1500	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	1500	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	3000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	1000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	1500	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1500	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	2000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	1500	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	3000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	3000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	1000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	1500	-
Cl. 7 302-2-32 : 1994(Marking)	-	1000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	500	-

03 Oct, 2027

-
Included w.e.f 14.08.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC),Cl. 32 302-2-32 : 1994 (Radiation Hazards)

3120

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 8637 (2020)

H Acid ? Specification ( Second Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	1000	-
3.2-Table 1-(i)(Purity (by nitrite value))	-	4000	-
3.2-Table 1-(ii)(Difference between nitrite value and coupling value)	-	5000	-
3.2-Table 1-(iii)(Matter insoluble in sodium carbonate solution)	-	5000	-
3.2-Table 1-(iv)(Purity (by HPCL))	-	5000	-
3.2-Table 1-(v)(Chromotropic acid content,)	-	5000	-
3.2-Table 1-(vi)(Koch’s acid content)	-	5000	-
4.1(Packing )	-	250	-
4.2(Marking)	-	250	-

26 Jul, 2027

-
iNCLUDED W.E.F. 09.06.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number