BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15210 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4021

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	-	-
6(Classification- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.3(Marking- IS 302-1)	-	-	-
7.4(Marking- IS 302-1)	-	-	-
7.6(Marking- IS 302-1)	-	-	-
7.7(Marking- IS 302-1)	-	-	-
7.8(Marking- IS 302-1)	-	-	-
7.11(Marking- IS 302-1)	-	-	-
7.12(Marking- IS 302-1)	-	-	-
7.13(Marking- IS 302-1)	-	-	-
7.14(Marking- IS 302-1)	-	-	-
7.15(Marking- IS 302-1)	-	-	-
7.101(Marking)	-	-	-
8( Protection Against Electric Shock, IS 302-1)	-	-	-
10(Power Input and Current, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
14(Transient Over Voltages, IS 302-1)	-	-	-
15.1(Moisture Resistance, IS 302-1)	-	-	-
15.2(Moisture Resistance, IS 302-1)	-	-	-
15.3(Moisture Resistance, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
19.4(Abnormal Operation, IS 302-1)	-	-	-
19.4(Abnormal Operation, IS 302-1)	-	-	-
19.5(Abnormal Operation, IS 302-1)	-	-	-
19.5(Abnormal Operation, IS 302-1)	-	-	-
19.7(Abnormal Operation)	-	-	-
19.9(Abnormal Operation)	-	-	-
19.1(Abnormal Operation)	-	-	-
19.101(Abnormal Operation)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.101(Mechanical Strength, IS 302-2-3)	-	-	-
22(Construction, IS 302-1)	-	-	-
22.101(Construction)	-	-	-
22.102(Construction)	-	-	-
22.103(Construction)	-	-	-
22.104(Construction)	-	-	-
22.105(Construction)	-	-	-
22.106(Construction)	-	-	-
22.107(Construction)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
23.2(Internal Wiring, IS 302-1)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
23.4(Internal Wiring, IS 302-1)	-	-	-
23.5(Internal Wiring, IS 302-1)	-	-	-
23.6(Internal Wiring, IS 302-1)	-	-	-
23.7(Internal Wiring, IS 302-1)	-	-	-
23.8(Internal Wiring, IS 302-1)	-	-	-
23.9(Internal Wiring, IS 302-1)	-	-	-
23.10(Internal Wiring, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26(Terminals for External Conductors, IS 302-1)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
27.2(Provision for Earthing, IS 302-1)	-	-	-
27.3(Provision for Earthing, IS 302-1)	-	-	-
27.4(Provision for Earthing, IS 302-1)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28(Screws & Connections, IS 302-1)	-	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-	-
31(Resistance of Rusting, IS 302-1)	-	-	-
4(General requirement)	-	-	-
16(Leakage current and electric strength)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
18(Endurance)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.7(Harmonics)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
19(Abnormal operation)	-	-	-
25(Supply Connection and External Flexible Cords)	-	-	-

15 Oct, 2027

-
Included w.e.f. 11.11.2025 Exclusion: "24.1 (Components, IS 302-1) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 32 (Radiation, Toxicity and similar Hazard IS 302-1)"

4022

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

CM ,CS,CD nominal diameter up to 200 mm

12600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100.00	-
9.5(Tensile Strength IS 12235(Part 13))	-	1300.00	Sample Preparation: 500.00
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000.00	Sample Preparation: 500.00
9.3(Density IS 12235 (Part 14))	-	700.00	-
9.2(Internal Diameter)	-	1000.00	Sample Preparation: 500.00
9.1( Visual Appearance)	-	500.00	-
9.1(Visual Appearance)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4(Sealing rings - Hardness)	-	500.00	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500.00	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500.00	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500.00	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500.00	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	500.00	-
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	500.00	-
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	500.00	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500.00	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500.00	-
7.3.2(Rib height)	-	500.00	-
7.3.1(No.of Ribs)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	500.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	500.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	500.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	500.00	-
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1200.00	-
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1200.00	-
5(COLOUR)	-	500.00	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	500.00	-
8.4(Width b)	-	500.00	-
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	500.00	-
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	500.00	-
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	500.00	-
5.0(Colour of Pipes)	-	500.00	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000.00	-
4.1.2(K-Value as per IS-4669)	-	1000.00	-
7.1(Screen Pipes)	-	0.00	-
11(Marking)	-	500.00	-
5.1(Materials)	-	0.00	-
8(Packing)	-	0.00	-
4.1.3(Cross Chain Length)	-	0.00	-
7.2(Link Twisted (Cross chain))	-	0.00	-
7.3(The Basic chains)	-	0.00	-
7.9(Case Depth)	-	0.00	-
8(Marking)	-	0.00	-
Cl 9.7(Effect on Water Lead (first extraction))	-	3000.00	-
Cl 9.7(Effect on Water Lead (third extraction))	-	3000.00	-
Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	3000.00	-
Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000.00	-
Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000.00	-

-
Included w.e.f.05.08.2025 Exclusion Cl 4.1.1 (VCM Content as per IS 10151 (Annex A))

4023

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	1000	-
Table-1(Overall height)	-	1000	-
Table-1(Distance from top of scale to top of cylinder)	-	1000	-
Table-1(Internal height to highest graduation line)	-	1000	-
Table-1(Sub-divisions)	-	1000	-
Table-1(capacity at lowest graduation line)	-	1000	-
Cl-9.1(Wall thickness)	-	1000	-
Cl-9.2(Stability)	-	1000	-
Cl-9.3(Base)	-	1000	-
Cl-9.4(Rim and spout)	-	1000	-
Cl-9.5(Neck and stopper)	-	1000	-
Cl-9.6, Table-2(Nominal capacity)	-	1000	-
Cl-9.6, Table-2(Overall height)	-	1000	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	1000	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	1000	-
Cl-9.6, Table-2(Sub divisions)	-	1000	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	1000	-
Cl-10.1(Graduation)	-	1000	-
Cl-10.2(Figuring)	-	1000	-
Cl-11(Accuracy testing)	-	1000	-
Cl-13(Visibility of graduation lines, figures and marking)	-	0	-
Clause. 8.0(Material)	-	1500	-
Table- 1(Max. Permissible Error (Class- a))	-	1000	-
Table- 1(Max. Permissible Error (Class- b))	-	1000	-
Table- 2(Max. Permissible Error (Type-2))	-	1000	-

-
Included w.e.f. 12.11.2025

4024

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 11805 (2024)

POLYETHYLENE POUCHES FOR PACKAGING LIQUID DAIRY PRODUCTS â SPECIFICATION (THIRD REVISION)

10650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Material)	-	500	-
Cl-5.1.1(Description)	-	500	-
Cl-5.1.2(Film Form)	-	500	-
Cl-5.1.4(Odour)	-	500	-
Cl-5.1.5(Thickness)	-	500	-
Cl-5.1.6(Width)	-	500	-
Cl-5.1.7(Tensile Strength)	-	1800	Testing charges = 1300 Specimen charges = 500
Cl-5.1.8(Elongation at Break)	-	1800	Testing charges = 1300 Specimen charges = 500
Cl-5.1.9(Dart Impact Resistance)	-	850	-
Cl-5.1.10(Slip)	-	850	-
Cl-5.1.11(Overall Migration Testing)	-	1700	-
Cl-5.1.12(Determination of Specific Migration)	-	3000	-
Cl-5.1.12.3, Table-1 (i)(Barium)	-	0	-
Cl-5.1.12.3, Table-1 (iii)(Copper)	-	0	-
Cl-5.1.12.3, Table-1 (iv)(Iron)	-	0	-
Cl-5.1.12.3, Table-1 (v)(Lithium)	-	0	-
Cl-5.1.12.3, Table-1 (vi)(Manganese)	-	0	-
Cl-5.1.12.3, Table-1 (vii)(Zinc)	-	0	-
Cl-5.1.12.3, Table-1 (viii)(Antimony)	-	0	-
Cl-5.1.12.3, Table-1 (ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP))	-	0	-
Cl-5.2.1(Leak Test)	-	0	-
Cl-5.2.2(Stack Load Test)	-	0	-
Cl-5.2.3(Drop Test)	-	0	-
Cl-7(Marking)	-	0	-
Cl-5.1.12.3, Table-1 (ii)(Cobalt)	-	0	-
Cl-5.3(Construction)	-	0	-
Cl-5.2.4(Printing Requirements)	-	500	-
Cl-4(Material)	-	500	-
Cl-5.1.1(Description)	-	500	-
Cl-5.1.2(Film Form)	-	500	-
Cl-5.1.4(Odour)	-	500	-
Cl-5.1.5(Thickness)	-	500	-
Cl-5.1.6(Width)	-	500	-
Cl-5.1.7(Tensile Strength)	-	1800	-
Cl-5.1.8(Elongation at Break)	-	1800	-
Cl-5.1.9(Dart Impact Resistance)	-	850	-
Cl-5.1.10(Slip)	-	850	-
Cl-5.1.11(Overall Migration Testing)	-	3000	-
Cl-5.1.12(Determination of Specific Migration)	-	3000	-
Cl-5.1.12.3, Table-1 (i)(Barium)	-	0	-
Cl-5.1.12.3, Table-1 (iii)(Copper)	-	0	-
Cl-5.1.12.3, Table-1 (iv)(Iron)	-	0	-
Cl-5.1.12.3, Table-1 (v)(Lithium)	-	0	-
Cl-5.1.12.3, Table-1 (vi)(Manganese)	-	0	-
Cl-5.1.12.3, Table-1 (vii)(Zinc)	-	0	-
Cl-5.1.12.3, Table-1 (viii)(Antimony)	-	0	-
Cl-5.1.12.3, Table-1 (ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP))	-	0	-
Cl-5.2.1(Leak Test)	-	500	-
Cl-5.2.2(Stack Load Test)	-	500	-
Cl-5.2.3(Drop Test)	-	1100	-
Cl-7(Marking)	-	500	-
Cl-5.1.12.3, Table-1 (ii)(Cobalt)	-	0	-
Cl-5.3(Construction)	-	500	-
Cl-5.2.4(Printing Requirements)	-	500	-

09 Aug, 2028

-
Included w.e.f.05.08.2025 Exclusion Cl-5.1.3 (Winding of Film) Cl-5.2.4 (Printing Requirements)

4025

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	200000	-
Cl-4.2(Energy source classifications)	-	200000	-
Cl-4.3(Protection against energy sources)	-	200000	-
Cl-4.4(Safeguards)	-	200000	-
Cl-4.5(Explosion)	-	200000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	200000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	200000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	200000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	200000	-
Cl-4.10(Components requirements)	-	200000	-
Cl-5.1(General- Electrically-caused injury)	-	200000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	200000	-
Cl-5.3(Protection against electrical energy sources)	-	200000	-
Cl-5.4(Insulation materials and requirements)	-	200000	-
Cl-5.5(Components as safeguards)	-	200000	-
Cl-5.6(Protective conductor)	-	200000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	200000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	200000	-
Cl-6.1(General- Electrically-caused fire)	-	200000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	200000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	200000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	200000	-
Cl-6.5(Internal and external wiring)	-	200000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	200000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	200000	-
Cl-7.3(Ozone exposure)	-	200000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	200000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	200000	-
Cl-8.1(General- Mechanically-caused injury)	-	200000	-
Cl-8.2(Mechanical energy source classifications)	-	200000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	200000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	200000	-
Cl-8.5(Safeguards against moving parts)	-	200000	-
Cl-8.6(Stability of equipment)	-	200000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	200000	-
Cl-8.8(Handle strength)	-	200000	-
Cl-8.9(Wheels or casters attachment requirements)	-	200000	-
Cl-8.10(Carts, stands, and similar carriers)	-	200000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	200000	-
Cl-9.1(General-Thermal burn injury)	-	200000	-
Cl-9.2(Thermal energy source classifications)	-	200000	-
Cl-9.3(Touch temperature limits)	-	200000	-
Cl-9.4(Safeguards against thermal energy sources)	-	200000	-
Cl-9.5(Requirements for safeguards)	-	200000	-
Cl-9.6(Requirements for wireless power transmitters)	-	200000	-
Annex A(Examples of equipment within the scope of this document)	-	200000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	200000	-
Annex B-2(Normal operating conditions)	-	200000	-
Annex B-3(Simulated abnormal operating conditions)	-	200000	-
Annex B-4(Simulated single fault conditions)	-	200000	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	200000	-
Annex D-1(Impulse test generators)	-	200000	-
Annex D-2(Antenna interface test generator)	-	200000	-
Annex D-3(Electronic pulse generator)	-	200000	-
Annex E-1(Electrical energy source classification for audio signals)	-	200000	-
Annex E-2(Audio signals used during test)	-	200000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	200000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	200000	-
Annex F-2(Letter symbols and graphical symbols)	-	200000	-
Annex F-3(Equipment markings)	-	200000	-
Annex F-4(Instructions)	-	200000	-
Annex F-5(Instructional safeguards)	-	200000	-
Annex G-1(Switches)	-	200000	-
Annex G-2(Relays)	-	200000	-
Annex G-3(Protective devices)	-	200000	-
Annex G-4(Connectors)	-	200000	-
Annex G-5(Wound components)	-	200000	-
Annex G-6(Wire insulation)	-	200000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	200000	-
Annex G-8(Varistors)	-	200000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	200000	-
Annex G-10(Resistors)	-	200000	-
Annex G-11(Capacitors and RC units)	-	200000	-
Annex G-12(Optocouplers)	-	200000	-
Annex G-13(Printed boards)	-	200000	-
Annex G-14(Coatings on component terminals)	-	200000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	200000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	200000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	200000	-
Annex H-2(Method A)	-	200000	-
Annex H-3(Method B)	-	200000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	200000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	200000	-
Annex J-2(Type tests)	-	200000	-
Annex J-3(Testing during manufacturing)	-	200000	-
Annex K-1(General- Safety interlocks)	-	200000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	200000	-
Annex K-3(Inadvertent change of operating mode)	-	200000	-
Annex K-4(Interlock safeguard override)	-	200000	-
Annex K-5(Fail-safe)	-	200000	-
Annex K-6(Mechanically operated safety interlocks)	-	200000	-
Annex K-7(Interlock circuit isolation)	-	200000	-
Annex L-1(General requirements)	-	200000	-
Annex L-2(Permanently connected equipment)	-	200000	-
Annex L-3()	-	200000	-
Annex L-4(Single-phase equipment)	-	200000	-
Annex L-5(Three-phase equipment)	-	200000	-
Annex L-6(Switches as disconnect devices)	-	200000	-
Annex L-7(Plugs as disconnect devices)	-	200000	-
Annex L-8(Multiple power sources)	-	200000	-
Annex L-9(Compliance criteria)	-	200000	-
Annex M-1(General requirements)	-	200000	-
Annex M-2(Safety of batteries and their cells)	-	200000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	200000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	200000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	200000	-
Annex M-6(Safeguards against short-circuits)	-	200000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	200000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	200000	-
Annex M-9(Preventing electrolyte spillage)	-	200000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	200000	-
Annex N(Electrochemical potentials (V))	-	200000	-
Annex O(Measurement of creepage distances and clearances)	-	200000	-
Annex P-1(General-Safeguards against conductive objects)	-	200000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	200000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	200000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	200000	-
Annex Q-1(Limited power source)	-	200000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	200000	-
Annex R(Limited short-circuit test)	-	200000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	200000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	200000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	200000	-
Annex S-4(Flammability classification of materials)	-	200000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	200000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	200000	-
Annex T-1(General-Mechanical strength tests)	-	200000	-
Annex T-2(Steady force test, 10 N)	-	200000	-
Annex T-3(Steady force test, 30 N)	-	200000	-
Annex T-4(Steady force test, 100 N)	-	200000	-
Annex T-5(Steady force test, 250 N)	-	200000	-
Annex T-6(Enclosure impact test)	-	200000	-
Annex T-7(Drop test)	-	200000	-
Annex T-8(Stress relief test)	-	200000	-
Annex T-9(Glass impact test)	-	200000	-
Annex T-10(Glass fragmentation test)	-	200000	-
Annex T-11(Test for telescoping or rod antennas)	-	200000	-
Annex V-1(Accessible parts of equipment)	-	200000	-
Annex V-2(Accessible part criterion)	-	200000	-
Annex W(Comparison of terms introduced in this document)	-	200000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	200000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	200000	-
Annex Y-3(Resistance to corrosion)	-	200000	-
Annex Y-4(Gaskets)	-	200000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	200000	-
Annex Y-6(Mechanical strength of enclosures)	-	200000	-

08 May, 2028

-
Included w.e.f. 18.08.2025 Exclusion: "Annex C-2 (UV light conditioning test) Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Annex Y-2 (Resistance to UV radiation) Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) "

4026

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

Electrical

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	100	Additional Testing Charge For EMI/EMC:- 20,0000/-
Clause No - 5.18(linear and angular dimension)	-	1000	-
Clause No - 6.2(harmfull ingress of water)	-	100	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	-
Clause No - 8.2(Addition)	-	1000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	5000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	2500	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	2500	-
Clause No - 14(Impulse test voltage)	-	5000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	5000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	10000	-
Clause No -19.11.4.1(electrostatic discharge)	-	25000	-
Clause No -19.11.4.2(radiated field)	-	45000	-
Clause No -19.11.4.3(fast transient)	-	25000	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	25000	-
Clause No -21.1(Mechanical strength)	-	3000	-
Clause No -22.1(construction)	-	5000	-
Clause No -22.11(push force applied)	-	5000	-
Clause No -24.1.2(safety isolating transformer)	-	5000	-
Clause No -24.1.3(for switches)	-	5000	-
Clause No -24.1.4(for automatic control)	-	5000	-
Clause No -24.1.5(for innterconnection couplers)	-	5000	-
Clause No -24.4(plug and socket)	-	5000	-
Clause No -25.8, Table no -11(conductor resistance)	-	5000	-
Clause No -25.5(dimension for pins)	-	5000	-
Clause No -27.6(for circuit board)	-	2500	-
Clause No -29.2(comparative tracking index)	-	5000	-
Clause No -29.3.3(dry heat test)	-	5000	-
Clause No -30.2.1(glow wire test)	-	5000	-
Clause No -30.101("incorporate combustible material")	-	5000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	5000	-
18(ENDURANCE)	-	100	-
28(SCREWS AND CONNECTIONS)	-	2500	-
31(RESISTANCE TO RUSTING)	-	2500	-
19.11.4.5(Immunity to conducted discharges)	-	30000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	-
19.11.4.7(Harmonics)	-	25000	-
22(CONSTRUCTION)	-	5000	-
24(COMPONENTS)	-	5000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2500	-
11(Heating)	-	10000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -19.11.4.1(electrostatic discharge)	-	0	-
Clause No -19.11.4.2(radiated field)	-	0	-
Clause No -19.11.4.3(fast transient)	-	0	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
22(CONSTRUCTION)	-	0	-
24(COMPONENTS)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
11(Heating)	-	0	-

-
Included w.e.f. 04.11.2025 24 (COMPONENTS)

4027

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17636 (2021)

Bunk Beds - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	2000	-
CLAUSE 5(DIMENSIONS)	-	2000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	2000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	2000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	2000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	2000	-
CLAUSE 7.7(Stability Test)	-	2000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	2000	-
Cl-5(Dimensions)	-	2000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	2000	-
Cl-6.1 (b)(Pencil hardness)	-	2000	-
Cl-6.1 (c)(Resistance to wet heat)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	2000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) 1(Breaking load)	-	2000	-
Cl-6.2 (a) 2(Elongation at break)	-	2000	-
Cl-6.2 (a) 3(Tear strength)	-	2000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	2000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	2000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	2000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	2000	-
Cl-6.2 (a) 8(Pilling resistance)	-	2000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	2000	-
Cl-6.2 (a) 10(Seam slippage)	-	2000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	2000	-
Cl-6.2 (a) 13(Bursting strength)	-	2000	-
Cl-6.2 (a) 14(Resistance to cold)	-	2000	-
Cl-6.2 (b) 1(Tear strength)	-	2000	-
Cl-6.2 (b) 2(Flexing endurance)	-	2000	-
Cl-6.2 (b) 3(Finish adhesion)	-	2000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	2000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	2000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	2000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	2000	-
Cl-7.1(general test conditions)	-	1000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	2000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	2000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	2000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	2000	-
Cl-7.3.1(Gaps)	-	2000	-
Cl-7.4.1(Bed Base)	-	2000	-
Cl-7.4.2(Bed Base)	-	2000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	2000	-
Cl-7.5.2(Dimensions of Treads)	-	2000	-
Cl-7.6(Strength of Frame and Fastenings)	-	2000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	2000	-
Cl-10(Marking)	-	1000	-
Cl-7.3.2(Gaps)	-	2000	-
Cl-7.7(Stability)	-	2000	-

19 Jul, 2027

-
Included w.e.f.11.08.2025

4028

Sleen India Biz venture Private Limited, Agra

9139736

IS 16011 (2012)

Aluminium and aluminium alloy foil for pharmaceutical packaging - Specification

All type

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5- Table-1(Pin hole count- IS 16011)	-	250	-
6(Freedom from defects- IS 16011)	-	250	-
7.1(Al - IS 504)	-	250	-
7.1(Cu - IS 504)	-	250	-
7.1(Mn - IS 504)	-	250	-
7.1(Si - IS 504)	-	250	-
7.1(Fe- IS 504)	-	250	-
7.1(Mn- IS 504)	-	250	-
7.1(Zn- IS 504)	-	250	-
7.1(Cr- IS 504)	-	250	-
7.1(Ti- IS 504)	-	250	-
7.2(Material - IS 16011)	-	250	-
7.3(Material - IS 16011)	-	250	-
7.4(Material - IS 16011)	-	250	-
7.5(Material - IS 16011)	-	250	-
9(LUBRICANTS- IS 16011)	-	500	-
11(AVERAGE THICKNESS OF BARE FOIL - IS 16011)	-	500	-
12.1(Pharma Laminate - IS 16011)	-	500	-
12.2(Coated Blister Pack Foil- IS 16011)	-	500	-
12.3(Winding- IS 16011)	-	250	-
13.1(thickness of laminated products - IS 16011)	-	500	-
13.2(Width- IS 16011)	-	250	-
14.1-Tsable 4(Bursting strength for bare strip pack foil )	-	500	-
14.1-Tsable 4(Bursting strength for pharma laminate)	-	0	Complete test price for cl.14.1 Bursting Strength is 500/-.
14.2-Tsable 5(Peel Strength (for Pharma Laminate))	-	500	-
14.3-Tsable 6(Sealing Strength (for Coated Blister Pack Foil ))	-	500	-
14.3-Tsable 6(Sealing Strength (for Pharma Laminate))	-	0	Complete test price for cl.14.3 Sealing Strength is 500/-.
15.1(SURFACE CONDITION- IS16011)	-	500	-
15.2(SURFACE CONDITION- IS 16011)	-	0	Test price for cl.15 SURFACE CONDITION is 500/-.
5- Table-1(Pin hole count- IS 16011)	-	0	Repeated Clause.
6(Freedom from defects- IS 16011)	-	0	Repeated Clause.
7.1(Al - IS 504)	-	0	Repeated Clause.
7.1(Cu - IS 504)	-	0	Repeated Clause.
7.1(Mn - IS 504)	-	0	Repeated Clause.
7.1(Si - IS 504)	-	0	Repeated Clause.
7.1(Fe- IS 504)	-	0	Repeated Clause.
7.1(Mn- IS 504)	-	0	Repeated Clause.
7.1(Zn- IS 504)	-	0	Repeated Clause.
7.1(Cr- IS 504)	-	0	Repeated Clause.
7.1(Ti- IS 504)	-	0	Repeated Clause.
7.2(Material - IS 16011)	-	0	Repeated Clause.
7.3(Material - IS 16011)	-	0	Repeated Clause.
7.4(Material - IS 16011)	-	0	Repeated Clause.
7.5(Material - IS 16011)	-	0	Repeated Clause.
9(LUBRICANTS- IS 16011)	-	0	Repeated Clause.
11(AVERAGE THICKNESS OF BARE FOIL - IS 16011)	-	0	Repeated Clause.
12.1(Pharma Laminate - IS 16011)	-	0	Repeated Clause.
12.2(Coated Blister Pack Foil- IS 16011)	-	0	Repeated Clause.
12.3(Winding- IS 16011)	-	0	Repeated Clause.
13.1(thickness of laminated products - IS 16011)	-	0	Repeated Clause.
13.2(Width- IS 16011)	-	0	Repeated Clause.
14.1-Tsable 4(Bursting strength for bare strip pack foil )	-	0	Repeated Clause.
14.1-Tsable 4(Bursting strength for pharma laminate)	-	0	Repeated Clause.
14.3-Tsable 6(Sealing Strength (for Coated Blister Pack Foil ))	-	0	Repeated Clause.
14.3-Tsable 6(Sealing Strength (for Pharma Laminate))	-	0	V
15.1(SURFACE CONDITION- IS16011)	-	0	Repeated Clause.
15.2(SURFACE CONDITION- IS 16011)	-	0	Repeated Clause.
5 table -1(PINHOLE COUNT)	-	0	Repeated Clause.
6(FREEDOM FROM DEFECTS)	-	0	Repeated Clause.
7.1(MATERIAL)	-	0	Repeated Clause.
7.2(MATERIAL)	-	0	V
7.3(MATERIAL)	-	0	Repeated Clause.
7.4(MATERIAL)	-	0	Repeated Clause.
7.5(MATERIAL)	-	0	Repeated Clause.
8(SUPPLY OF MATERIAL)	-	0	Repeated Clause.
9(LUBRICANTS)	-	0	Repeated Clause.
10 TABLE -2(PREFERRED THICKNESSES)	-	300	-
11.2(AVERAGE THICKNESS OF BARE FOIL)	-	250	-
12.1(Pharma Laminate)	-	0	Repeated Clause.
12.2(Coated Blister Pack Foil)	-	0	Repeated Clause.
12.3(Winding)	-	0	Repeated Clause.
13.1(DIMENSIONS AND TOLERANCES)	-	0	Repeated Clause.
13.2 table 3(DIMENSIONS AND TOLERANCES)	-	0	Repeated Clause.
14.1 table -4(Bursting Strength)	-	0	Repeated Clause.
14.1.1(Bursting Strength)	-	500	Repeated Clause.
14.2 table -5(Peel Strength (for Pharma Laminate))	-	0	Repeated Clause.
14.3 table -6(Sealing Strength (for Coated Blister Pack Foil and Pharma Laminate))	-	0	Repeated Clause.
15.1(SURFACE CONDITION)	-	0	Repeated Clause.
15.2(SURFACE CONDITION)	-	0	Repeated Clause.
16.2.1 , table -7(SAMPLING)	-	250	-
16.2.2 ,table -7(SAMPLING)	-	250	-
18.1(marking)	-	250	-
14.2-Tsable 5(Peel Strength (for Pharma Laminate))	-	0	Repeated Clause.

-
Included w.e.f. 14.08.2025

4029

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	500	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	500	-
15(Moisture Resistance)	-	500	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal Operation)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
23(Internal Wiring)	-	500	-
24(Components)	-	500	-
25(Supply Connection & External Flexible Cords)	-	500	-
26(Terminals For External Conductors)	-	500	-
27(Provision For Earthing)	-	500	-
28(Screws & Connections)	-	500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
30(Resistance to Heat & Fire)	-	500	-
31(Resistance to Rusting)	-	500	-
32(Radiation hazards)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	500	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	500	-
15(Moisture Resistance)	-	500	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal Operation)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
23(Internal Wiring)	-	500	-
24(Components)	-	500	-
25(Supply Connection & External Flexible Cords)	-	500	-
26(Terminals For External Conductors)	-	500	-
27(Provision For Earthing)	-	500	-
28(Screws & Connections)	-	500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
30(Resistance to Heat & Fire)	-	500	-
31(Resistance to Rusting)	-	500	-
32(Radiation hazards)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-

22 Jul, 2028

-
Included w.e.f. 29.09.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 15 (Moisture Resistance) "

4030

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Up to DN 315 mm

32200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500.00	-
10.1(Surface Finish)	-	500.00	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500.00	-
10.7(Sulphated Ash Content)	-	1200.00	-
5(CLASSIFICATION OF PIPES)	-	500.00	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500.00	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500.00	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500.00	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500.00	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500.00	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500.00	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500.00	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500.00	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500.00	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500.00	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	500.00	-
7.2.1(DIMENSIONS-Socket)	-	500.00	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500.00	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500.00	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500.00	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500.00	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500.00	-
8(SEALING RINGS)	-	500.00	-
9.1(PIPE ENDS)	-	500.00	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500.00	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500.00	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500.00	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500.00	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	500.00	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500.00	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	850.00	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	11000.00	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	850.00	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850.00	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850.00	-
11.2(Resistance to External Blows at 0°C)	-	1000.00	Sample Preparation: 500.00
10.3(Effect on Water Test)	-	3000.00	-
6.1.2(PVC Resin)	-	1100.00	K-Value
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500.00	-
7.1.4(Length)	-	500.00	-
7.2.1.2b(Maximum inner diameter of groove)	-	500.00	-
13.1(Marking)	-	500.00	-
cL-13.1.1(Marking)	-	500.00	-
Cl-13.1.2(Marking)	-	500.00	-

-
Included w.e.f.05.08.2025 Exclusion Cl 6.1.1 (VCM Content)

4031

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 12 (1993)

Safety of household and similar electrical appliances - Specification: Part 2 particular requirements: Sec 12 warming plates and similar appliances

Electrical

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	Additional Testing Charge For EMI/EMC:- 20,0000/-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	2500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	5000	-
11(Temperature Rise/ Heating)	-	10000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	5000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	2000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	5000	-
15(Moisture Resistance)	-	5000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength)	-	2500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	5000	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	10000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2500	-
22(Construction)	-	5000	-
23(Internal Wiring)	-	2500	-
24(Components)	-	5000	-
25(Supply Connection & External Flexible Cords)	-	5000	-
26(Terminals For External Conductors)	-	2500	-
27(Provision For Earthing)	-	2500	-
28(Screws & Connections)	-	2500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	5000	-
30(Resistance to Heat & Fire)	-	5000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation hazards)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	25000	-
19.11.4.2(Radiated fields)	-	45000	-
19.11.4.3(Fast transient bursts)	-	25000	-
19.11.4.4(Surge immunity test)	-	25000	-
19.11.4.5(Immunity to conducted discharges)	-	30000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	-
19.11.4.7(Harmonics)	-	25000	-

-
Included w.e.f 29.09.2025

4032

IEC TEST LABS LLP

8165726

IS 16246 (2015)

Elastomer insulated cables with limited circuit integrity when affected by fire - Specification

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1( Cables for Fixed Installation)	-	1000	-
Cl.5( INSULATION)	-	1000	-
Cl. 6.1( Glass Tape)	-	1000	-
Cl 6.2( Polyethylene Teraphthalate (PETP) or Polypropylene base Tape)	-	1000	-
Cl 6.4( Fire Barrier Tape)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 8( ARMOUR)	-	1000	-
Cl 9.1( Inner Sheath)	-	1000	-
Cl 9.2( Outer Sheath)	-	1000	-
Cl 10.1( CONDUCTORS)	-	1000	-
Cl 10.2( CONDUCTORS)	-	1000	-
Cl 11.1( INSULATION)	-	1000	-
Cl 11.2(Thickness of Insulation IS 10810 : Part 6)	-	2000	-
Cl 12( CORE IDENTIFICATION)	-	1000	-
Cl 13( LAYING UP OF CORES)	-	1000	-
Cl 14.2( Thickness of Inner Sheath IS 10810 : Part 6)	-	2000	-
Cl 15.1( ARMOURING)	-	1000	-
Cl 15.3.1( Type of Armour)	-	1000	-
Cl 15.3.2( Type of Armour)	-	1000	-
Cl 15.3.3( ARMOURING)	-	1000	-
Cl 15.3.3( ARMOURING)	-	1000	-
Cl 15.4.1( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 16.2( OUTER SHEATH)	-	1000	-
Cl 16.3( Thickness of Outer Sheath - Avg IS 10810 : Part 6)	-	2000	-
Cl 16.3( Thickness of Outer Sheath - Minimum IS 10810 : Part 6)	-	2000	-
Cl 17.2(Annealing test (for copper) IS 10810 : Part 1)	-	2000	-
Cl 17.2(Conductor resistance test IS 10810 : Part 5)	-	2000	-
Cl 17.1(Persulphate test (tinned copper conductor) IS 10810 : Part 4)	-	5000	-
Cl 17.2(Tensile strength before ageing on insulation IS 10810 : Part 7)	-	2000	-
Cl 17.2(elongation at break before ageing on insulation IS 10810 : Part 7)	-	2000	-
Cl 17.2(Tensile strength after Ageing in air bomb IS 10810 : Part 56)	-	5000	-
Cl 17.2(Elongation after Ageing in air bomb IS 10810 : Part 56)	-	5000	-
Cl 17.2(Tensile strength variation)	-	5000	-
Cl 17.2(Elongation Variation)	-	5000	-
Cl 17.2(Hot set elongation on insulation IS 10810 : Part 30)	-	2000	-
Cl 17.2(Permanent elongation (set) on insulation IS 10810 : Part 30)	-	2000	-
Cl 17.1(Tensile strength before ageing on sheath IS 10810 : Part 7)	-	2000	-
Cl 17.1(elongation at break before ageing on sheath IS 10810 : Part 7)	-	2000	-
Cl 17.1(Hot set elongation test on sheath IS 10810 : Part 30)	-	2000	-
Cl 17.1(Permanent elongation (set) test on sheath IS 10810 : Part 30)	-	2000	-
Cl 17.1(Oxygen index test on sheath IS 10810 : Part 58)	-	5000	-
Cl 17.1(Temperature index test on sheath IS 10810 : Part 64)	-	5000	-
Cl 17.1(Acid gas generation on sheath IS 10810 : Part 39)	-	5000	-
Cl 17.2(Insulation resistance test IS 10810 : Part 43)	-	2000	-
Cl 17.1(Water absorption test (for insulation) IS 10810 : Part 28)	-	10000	-
Cl 18.2(High Voltage Test IS 10810 : Part 45)	-	2000	-
Cl 18.2(High Voltage Test IS 10810 : Part 45)	-	2000	-
Cl 18.3 Annex B of IS 16246( Circuit Integrity Test Under Fire Condition)	-	25000	-
Cl 18.3 Annex B of IS 16246( Circuit Integrity Test Under Fire Condition)	-	25000	-
Cl 18.4.1( Flame Retardence Test on Single Cable IS 10810 : Part 61)	-	10000	-
Cl 18.4.2(Flame Retardence Test on Bunched Cables IS 10810 : Part 63)	-	10000	-
Cl 19.1( Manufacturer’s Identification)	-	1000	-
Cl 19.2( Voltage Identification)	-	1000	-
Cl 19.3( Cable Identification)	-	1000	-
Cl 19.4( Cable Code)	-	1000	-

07 Sep, 2026

-
Included w.e.f.18.08.2025

4033

Testtex India Laboratories Private Limited, Noida

8138306

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

Occupational Footwear (Third Revision)

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	200	-
Cl 5.2.2(" Height of upper ")	-	200	-
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	200	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	700	-
Cl 5.3.2(Leak proofness)	-	500	-
Cl 5.3.3(Specific ergonomic features)	-	1000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	2000	-
Cl 5.3.6(Seam strength)	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.2(Thickness)	-	200	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	3500	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	-
Cl 5.8.2.1(Thickness of Outsole)	-	200	-
Cl 5.8.2.2(Cleated area)	-	200	-
Cl 5.8.2.3(Cleat height)	-	200	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	3500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	200	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	200	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	500	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	3000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	3500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	3500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	200	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	200	-
Cl 6.2.7.3(Resistance to cutting)	-	4000	-
Cl 6.2.8(Scuff cap)	-	1000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	2000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	200	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	200	-
Cl 7("Marking ")	-	0	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	6000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	750	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	5000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	Repeated Clause
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	Repeated Clause
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	Repeated Clause
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	Repeated Clause
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	Repeated Clause
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	Repeated Clause
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	Repeated Clause
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	Repeated Clause
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	0	Repeated Clause
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	0	Repeated Clause
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	Repeated Clause
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	0	Repeated Clause
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	0	Repeated Clause
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse :yellow 23)	-	0	Repeated Clause
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution (ii))	-	0	Repeated Clause
Cl 5.7.2(Water permeability of insock)	-	0	Repeated Clause

-
Included w.e.f. 04.11.2025 Exclusion: Cl 6.2.6 (Ankle protection)

4034

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

Type- I II

40130 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Meterial)	-	4200	Identification-2000 Migration-1700 Specimen Charges-500
4.2("Fabric a) Width of Tape")	-	500	-
4.2("Fabric b) Linear Density")	-	700	-
4.2("Fabric c) Mesh")	-	500	-
4.2("Fabric c) Mesh")	-	500	-
4.2("Fabric d) Unlaminated Fabric Mass")	-	500	-
4.3(Sacks)	-	500	-
4.4.1(Loose Liner)	-	2000	Identification
4.4.1(Thickness of Linear)	-	500	-
4.4.2(Visual Observation)	-	500	-
4.4.3(Bottom Seam of Loose Liner)	-	500	-
4.5(Mass of The Lamination)	-	500	-
4.5(Laminated Fabric)	-	2000	Identification
4.5(Lamination Over Hang of the fabric after trimming)	-	500	-
5.6(Drop Impact Test)	-	850	-
4.6.1(Distance between the Two Row of Stitches)	-	500	-
4.6.1(Distance of outer stitch from the edge of the bag)	-	0	-
4.6.1(Depth of the Stitch( Double fold))	-	0	-
4.6.1(No.of Stitches/dm)	-	0	-
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	1100	-
4.6.2(Breaking Load for UV Stabilized sack)	-	1100	-
4.7(Mouth of the Sack)	-	500	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	500	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	0	-
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	500	-
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	500	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	500	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	500	-
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	500	-
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	2700	Length Wise-1100 Width Wise-1100 Specimen Charges-500
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1100	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	0	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	0	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	1200	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	1200	-
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	850	-
Cl. No.5.2(Visual Observation)	-	500	-
Cl. No.5.4(Breaking Strength of Fabric)	-	2200	Length Wise-1100 Width Wise-1100
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	1200	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	1200	-
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	1200	-
Cl. No.5.6(Drop Impact testing of filled sack)	-	850	-
Cl. No.5.7(UV Resistance)	-	10180	-
Cl. No.6.1(Printing on Sacks)	-	0	-
Cl. No.6.4.(BIS Certification Marking)	-	0	-

09 Aug, 2028

-
Included w.e.f.05.08.2025 Exclusion Cl. No.5.3 (Mass of Bale) Cl. No.6.3. (Marking on the Bale)

4035

Amit Test and Calibration Centre (8172006)

8172006

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	500	Rs. 20,000/- for C1,Rs. 35,000 for C2 & Rs 80000 for C3. Additional charge Rs 500 for each core Additional charge of Rs 2500 for optional test , Additional charge of Rs 2500 for Armour test
Cl-5, Table-1 (i)(Tensile strength)	-	3000	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	5000	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	1500	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	1500	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	2000	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	2000	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	2000	-
Cl-5, Table-1 (iv)(Shrinkage)	-	1500	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	7000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	5000	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	500	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	500	-
Cl-7(Armouring)	-	500	-
Cl-8(Outer Sheath)	-	500	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	1000	-
Cl-11(Core Identification)	-	500	-
Cl-12(Laying up of Cores)	-	500	-
Cl-13(Inner Sheath (Common Covering))	-	500	-
Cl-14.1(Armouring- Application)	-	500	-
Cl-14.1.2(armour round wires/formed wires)	-	100	-
Cl-14.2(Type of Armour)	-	500	-
Cl-14.3(Dimensions)	-	1500	-
Cl-14.4(Joints)	-	500	-
Cl-14.5(Resistance)	-	2500	-
Cl-15.3(Thickness of Outer Sheath)	-	2000	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	1500	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	1500	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	1500	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	5000	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	2500	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	2500	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	3000	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	3000	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	2500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	2500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	5000	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	5000	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	5000	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	5000	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	5000	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	3000	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	2500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	3500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	3500	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	7000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	3500	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	2500	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	7000	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	3500	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	7000	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	2500	-
Cl-17.2(High voltage test)	-	5000	-
Cl-17.3(Flammability test)	-	3000	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.5(Flame retardance test on single cable)	-	5000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	10000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	10000	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	10000	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	10000	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	40000	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	3500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	3500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	15000	-

16 Apr, 2029

-
Included w.e.f 10.10.2025

4036

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 14611 (2024)

Multilayered Cross Laminated Sheets/Tarpaulins/Covers/Agricultural Films â Specification (Second Revision)

Type- XLn, LN,MN, HN, XHN

41955 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Workmanship)	-	500	-
Cl-6.2, 6.3 & 6.8, Table-1 (i)(Mass per unit area, g/m²)	-	500	-
Cl-6.2, 6.3 & 6.8, Table-1 (ii)("Tensile strength1), Min,kg/cm²- (a) Longitudinal direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (ii)("Tensile strength1), Min,kg/cm² (b) Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iii)("After ageing at 70 ºC ± 1 ºC for 168 h, Max, kg/cm2 a)Longitudinaldirection")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iii)("After ageing at 70 ºC ± 1 ºC for 168 h, Max, kg/cm2 b) Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iv)("Elongation at break, Min, percent a)Longitudinaldirection")	-	0	INCLUDED IN TENSILE STRENGTH
Cl-6.2, 6.3 & 6.8, Table-1 (iv)("Elongation at break, Min, percent b) Transverse direction")	-	0	INCLUDED IN TENSILE STRENGTH
Cl-6.2, 6.3 & 6.8, Table-1 (v)("Tear strength, Min, g: a)Longitudinaldirection")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (v)("Tear strength, Min, g: b)Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (vi)(Dart impact strength, Min, g)	-	850	-
Cl-6.2, 6.3 & 6.8, Table-1 (vii)(Average tensile strengthand elongation at breakafter exposing to UVradiation and weathering,Min, (kgf))	-	12780	Testing Charges-2600 Conditioning Charges-10180
Cl-6.4(Water Proofness Test)	-	1000	-
Cl-6.5(Strength of Joints/Seams)	-	1100	-
Cl-6.6(Flex Test)	-	7200	Testing Charges-3000 Conditioning Charges-4200
Cl-6.7(Ease of In-Situ Repair)	-	500	-
Cl-7(Fixing of Eyelets (for tarpaulins only))	-	500	-
Cl-9(Packing and Marking)	-	0	-
Cl-6.3(Accelerated Ageing Test)	-	4200	-
Cl-5(Construction of sheets/tarpaulins/covers/agricultural films)	-	0	-

09 Aug, 2028

-
Included w.e.f.05.08.2025

4037

Stellar Test House, Noida

8171606

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	200	Complete testing charges=Rs.40000/- Rs.10000/- for Single core unarmoured cable; Rs.2000/- for each addl. Core; Rs.4000/- addl. For armoured cable; Rs.9000/- for addl. Tests for Cat-C1(FR); Rs.13000/- for addl. Tests for Cat-C2 (FR-LSH); Rs.20000/- for ad
Cl-5, Table-1 (i)(Tensile strength)	-	500	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	300	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	300	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	1000	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	1000	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	1000	-
Cl-5, Table-1 (iv)(Shrinkage)	-	500	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	3000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	200	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	100	-
Cl-7(Armouring)	-	1000	-
Cl-8(Outer Sheath)	-	200	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	250	-
Cl-11(Core Identification)	-	100	-
Cl-12(Laying up of Cores)	-	100	-
Cl-13(Inner Sheath (Common Covering))	-	100	-
Cl-14.1(Armouring- Application)	-	100	-
Cl-14.1.2(armour round wires/formed wires)	-	100	-
Cl-14.2(Type of Armour)	-	100	-
Cl-14.3(Dimensions)	-	100	-
Cl-14.4(Joints)	-	100	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	200	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	300	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	250	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	250	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	200	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	200	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	250	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	250	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	300	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	300	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	1000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	500	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	500	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	500	-
Cl-17.2(High voltage test)	-	500	-
Cl-17.3(Flammability test)	-	500	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	10000	-
Cl-17.5(Flame retardance test on single cable)	-	5000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	5000	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	500	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	500	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	500	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	500	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	2000	-
Cl-4(Conductors -Material)	-	200	-
Cl-5, Table-1 (i)(Tensile strength)	-	500	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	500	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	500	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	500	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	500	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	500	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	500	-
Cl-5, Table-1 (iv)(Shrinkage)	-	300	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	2000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	500	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	200	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	200	-
Cl-7(Armouring)	-	500	-
Cl-8(Outer Sheath)	-	500	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	200	-
Cl-11(Core Identification)	-	200	-
Cl-12(Laying up of Cores)	-	200	-
Cl-13(Inner Sheath (Common Covering))	-	200	-
Cl-14.1(Armouring- Application)	-	200	-
Cl-14.1.2(armour round wires/formed wires)	-	200	-
Cl-14.2(Type of Armour)	-	200	-
Cl-14.3(Dimensions)	-	200	-
Cl-14.4(Joints)	-	200	-
Cl-14.5(Resistance)	-	500	-
Cl-15.3(Thickness of Outer Sheath)	-	500	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	500	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	500	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	500	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	500	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	500	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	500	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	500	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	500	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	500	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	500	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	200	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	200	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	500	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	500	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	500	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	1000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	1000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	1000	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	1000	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	1000	-
Cl-17.2(High voltage test)	-	500	-
Cl-17.3(Flammability test)	-	500	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.5(Flame retardance test on single cable)	-	5000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	2500	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	2500	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	500	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	200	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	500	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	500	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	2000	-

-
Included w.e.f 12.09.2025

4038

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	300	-
Cl-5.1(Material)	-	300	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	300	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	300	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	300	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	300	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	200	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	300	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	300	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	300	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	300	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	300	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	300	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	300	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	300	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	300	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	300	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	300	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	300	-
Cl 5.4(Lead)	-	300	-
Cl 5.4(Cadmium)	-	300	-
Cl 5.4(Arsenic)	-	300	-
Cl-7(Dimension)	-	300	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	300	-
Cl-4(General requirements)	-	200	-
Cl-5.1(Material)	-	300	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	300	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	300	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	300	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	300	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	300	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	300	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	300	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	300	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	300	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	300	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	300	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	300	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	300	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	300	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	300	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	300	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	300	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	300	-
Cl 5.4(Lead)	-	300	-
Cl 5.4(Cadmium)	-	300	-
Cl 5.4(Arsenic)	-	300	-
Cl-7(Dimension)	-	300	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	300	-

-
Included w.e.f. 04.09.2025

4039

Dashmesh Test Lab Private Limited

8186926

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

All

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.16(Creepage Distances and Clearances)	-	200	-
10.14(Cord Grip Test)	-	500	-
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	500	-
10.12(Moisture Resistance Test)	-	1000	-
10.11(Protection against Electric Shock)	-	500	-
10.1(Earthing Connection)	-	500	-
10.9(Fan Speed and Input)	-	500	-
10.8(Construction)	-	500	-
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	500	-
10.6(High Voltage Test)	-	500	-
10.5(Leakage Current)	-	500	-
10.4(Temperature-Rise Test)	-	500	-
10.3(Air Delivery Test)	-	1000	-
9.0(Marking)	-	200	-
7.11(Oscillating Mechanism)	-	500	-
7.9(Interchangeability)	-	200	-
7.8(Speed Regulators)	-	500	-
6.0(Design and General Construction)	-	200	-
5.0(Rated Frequency)	-	200	-
4.0(Rated Voltages)	-	200	-
3.0(Size, Speed and Types)	-	200	-
7.1(Protection Against Electric Shock)	-	200	-
7.2(Electrical Insulation Under Normal Operating Conditions)	-	200	-
7.3(Temperature-rise)	-	500	-
7.5(Creepage Distances and Clearances)	-	500	-
7.6(Finish)	-	200	-
7.7(Insulating Materials)	-	200	-
7.10(Oscillating Mechanism)	-	500	-
8.1, 8.2(Air delivery and service value)	-	500	-
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	500	-
7.1(Protection Against Electric Shock)	-	500	-
7.2(Electrical Insulation Under Normal Operating Conditions)	-	500	-
7.3(Temperature-rise)	-	500	-
7.5(Creepage Distances and Clearances)	-	500	-
7.6(Finish)	-	500	-
7.7(Insulating Materials)	-	500	-
7.10(Oscillating Mechanism)	-	500	-
8.1, 8.2(Air delivery and service value)	-	500	-
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	-	-
7.1(Protection Against Electric Shock)	-	-	-
7.2(Electrical Insulation Under Normal Operating Conditions)	-	-	-
7.3(Temperature-rise)	-	-	-
7.5(Creepage Distances and Clearances)	-	-	-
7.6(Finish)	-	-	-
7.7(Insulating Materials)	-	-	-
7.10(Oscillating Mechanism)	-	-	-
8.1, 8.2(Air delivery and service value)	-	-	-

22 Jul, 2028

-
Included w.e.f.18.08.2025

4040

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

140000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5(Safety specification)	-	60000		-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	80000		-

24 Sep, 2026

-
Included w.e.f 10.09.2025 Exclusion: Restricted to only Cl.3.5(Safety specification)n & Cl.3.6 ((Electromagnetic Compatibility (EMC) Requirements)

4041

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17634 (2022)

Storage Units - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	4500	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	7500	-
CLAUSE 7.1(SAFETY TESTS (General))	-	1000	-
CLAUSE 7.2(Test for Non-Movable Parts)	-	1000	-
CLAUSE 7.2.1(Shelves)	-	1000	-
CLAUSE 7.2.1.2(Deflection of shelves)	-	1000	-
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	1000	-
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	1000	-
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	1000	-
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	1000	-
CLAUSE 7.2.4.2(Drop test)	-	1000	-
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	1000	-
CLAUSE 7.3.1(Pivoted Doors)	-	1000	-
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	1000	-
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	1000	-
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	1000	-
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	1000	-
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	1000	-
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	1000	-
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	9000	-
CLAUSE 7.3.3(Flaps)	-	30000	-
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	1000	-
CLAUSE 7.3.3.2(Durability of flaps)	-	4000	-
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	1000	-
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	1000	-
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	1000	-
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	4000	-
CLAUSE 7.3.5(Extension Element)	-	1000	-
CLAUSE 7.3.5.2(Strength of extension elements)	-	1000	-
CLAUSE 7.3.5.3(Durability of extension elements)	-	13000	-
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	1000	-
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	1000	-
CLAUSE 7.3.5.6(Interlock test)	-	1000	-
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	1000	-
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	1000	-
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	1000	-
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	4000	-
CLAUSE 7.3.7(Pull Force Test)	-	1000	-
CLAUSE 7.3.7(Pull Force Test)	-	1000	-
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	1000	-
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	4000	-
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	1000	-
CLAUSE 7.4.1.3(Sustained load test (overload))	-	1000	-
CLAUSE 7.4.1.4(Dislodgement test)	-	1000	-
CLAUSE 7.5(Stability Tests)	-	1000	-
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	1000	-
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	1000	-
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	1000	-
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	1000	-
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	1000	-
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1500	-
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.1(General)	-	0	Repeated
Cl-7.2.1(Shelves)	-	0	Repeated
Cl-7.2.2(Tops and Bottoms)	-	0	Repeated
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	0	Repeated
Cl-7.2.4(Strength of the Structure)	-	0	Repeated
Cl-7.3.1(Pivoted Doors)	-	0	Repeated
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	0	Repeated
Cl-7.3.3(Flaps)	-	0	Repeated
Cl-7.3.4(Vertical Roll-Fronts)	-	0	Repeated
Cl-7.3.5(Extension Elements)	-	0	Repeated
Cl-7.3.6(Locking and Latching Mechanism Test)	-	0	Repeated
Cl-7.3.7(Pull Force Test)	-	0	Repeated
Cl-7.3.8(Top Load Ease Cycle Test)	-	0	Repeated
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	0	Repeated
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	0	Repeated
Cl-7.4.1(Units Not Supported by the Floor)	-	0	Repeated
Cl-7.4.2(Units Supported by the Floor)	-	0	Repeated
Cl-7.5.1(General)	-	0	Repeated
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	0	Repeated
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	0	Repeated
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	0	Repeated
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	0	Repeated
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	0	Repeated
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	0	Repeated
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	0	Repeated
Cl-7.5.9(Strength Test for Wall Attachments)	-	0	Repeated
Cl-9(Marking)	-	0	Repeated
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	0	Repeated
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	0	Repeated
CLAUSE 5(DIMENSIONS)	-	0	Repeated
CLAUSE 6(SURFACE PERFORMANCE)	-	0	Repeated
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	0	Repeated
CLAUSE 7.1(SAFETY TESTS (General))	-	0	Repeated
CLAUSE 7.2(Test for Non-Movable Parts)	-	0	Repeated
CLAUSE 7.2.1(Shelves)	-	0	Repeated
CLAUSE 7.2.1.2(Deflection of shelves)	-	0	Repeated
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	0	Repeated
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	0	Repeated
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	0	Repeated
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	0	Repeated
CLAUSE 7.2.4.2(Drop test)	-	0	Repeated
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	0	Repeated
CLAUSE 7.3.1(Pivoted Doors)	-	0	Repeated
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	0	Repeated
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	0	Repeated
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	0	Repeated
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	0	Repeated
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	0	Repeated
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	0	Repeated
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	0	Repeated
CLAUSE 7.3.3(Flaps)	-	0	Repeated
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	0	Repeated
CLAUSE 7.3.3.2(Durability of flaps)	-	0	Repeated
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	0	Repeated
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	0	Repeated
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	0	Repeated
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	0	Repeated
CLAUSE 7.3.5(Extension Element)	-	0	Repeated
CLAUSE 7.3.5.2(Strength of extension elements)	-	0	Repeated
CLAUSE 7.3.5.3(Durability of extension elements)	-	0	Repeated
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	0	Repeated
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	0	Repeated
CLAUSE 7.3.5.6(Interlock test)	-	0	Repeated
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	0	Repeated
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	0	Repeated
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	0	Repeated
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	0	Repeated
CLAUSE 7.3.7(Pull Force Test)	-	0	Repeated
CLAUSE 7.3.7(Pull Force Test)	-	0	Repeated
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	0	Repeated
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	0	Repeated
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	0	Repeated
CLAUSE 7.4.1.3(Sustained load test (overload))	-	0	Repeated
CLAUSE 7.4.1.4(Dislodgement test)	-	0	Repeated
CLAUSE 7.5(Stability Tests)	-	0	Repeated
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	0	Repeated
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	0	Repeated
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	0	Repeated
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	0	Repeated
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	0	Repeated
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	0	Repeated
Cl-6.1 (a)(Resistance to mechanical damage)	-	0	Repeated
Cl-6.1 (b)(Pencil hardness)	-	0	Repeated
Cl-6.1 (c)(Resistance to wet heat)	-	0	Repeated
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	0	Repeated
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	0	Repeated
Cl-6.1 (g)(Adhesive performance)	-	0	Repeated
Cl-6.2 (a) 1(Breaking load)	-	0	Repeated
Cl-6.2 (a) 2(Elongation at break)	-	0	Repeated
Cl-6.2 (a) 3(Tear strength)	-	0	Repeated
Cl-6.2 (a) 4(Colour fastness to light)	-	0	Repeated
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	0	Repeated
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	0	Repeated
Cl-6.2 (a) 7(Colour fastness to water)	-	0	Repeated
Cl-6.2 (a) 8(Pilling resistance)	-	0	Repeated
Cl-6.2 (a) 9(Coating adhesion strength)	-	0	Repeated
Cl-6.2 (a) 10(Seam slippage)	-	0	Repeated
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	0	Repeated
Cl-6.2 (a) 12(Abrasion resistance)	-	0	Repeated
Cl-6.2 (a) 13(Bursting strength)	-	0	Repeated
Cl-6.2 (a) 14(Resistance to cold)	-	0	Repeated
Cl-6.2 (b) 1(Tear strength)	-	0	Repeated
Cl-6.2 (b) 2(Flexing endurance)	-	0	Repeated
Cl-6.2 (b) 3(Finish adhesion)	-	0	Repeated
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	0	Repeated
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	0	Repeated
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	0	Repeated
Cl-6.2 (b) 7(Water vapour permeability)	-	0	Repeated
Cl-6.2 (b) 8(Colour fastness to water)	-	0	Repeated
Cl-7.1(General)	-	0	Repeated
Cl-7.2.1(Shelves)	-	0	Repeated
Cl-7.2.2(Tops and Bottoms)	-	0	Repeated
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	0	Repeated
Cl-7.2.4(Strength of the Structure)	-	0	Repeated
Cl-7.3.1(Pivoted Doors)	-	0	Repeated
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	0	Repeated
Cl-7.3.3(Flaps)	-	0	Repeated
Cl-7.3.4(Vertical Roll-Fronts)	-	0	Repeated
Cl-7.3.5(Extension Elements)	-	0	Repeated
Cl-7.3.6(Locking and Latching Mechanism Test)	-	0	Repeated
Cl-7.3.7(Pull Force Test)	-	0	Repeated
Cl-7.3.8(Top Load Ease Cycle Test)	-	0	Repeated
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	0	Repeated
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	0	Repeated
Cl-7.4.1(Units Not Supported by the Floor)	-	0	Repeated
Cl-7.4.2(Units Supported by the Floor)	-	0	Repeated
Cl-7.5.1(General)	-	0	Repeated
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	0	Repeated
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	0	Repeated
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	0	Repeated
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	0	RepeatedRepeated
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	0	Repeated
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	0	Repeated
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	0	Repeated
Cl-7.5.9(Strength Test for Wall Attachments)	-	0	Repeated
Cl-9(Marking)	-	0	Repeated
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	0	Repeated
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	0	Repeated

19 Jul, 2027

-
Included w.e.f 01.09.2025

4042

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

Type- I, II, III, IV

24625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	700	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	925	-
5.1.6(Ash content - IS 2508: 2024)	-	1200	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	700	-
5.1.1(Appearance)	-	500	-
5.1.2(Film Form)	-	0	Included in Visual appearance
5.1.3(Odour)	-	0	Included in Visual appearance
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	1100	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	500	-
5.2.1.2(Nominal Width)	-	500	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1800	Testing Charges-1300 Specimen Charges- 500
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1300	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	Included in Tensile Strength
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	Included in Tensile Strength
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2100	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2100	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	850	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	1600	Testing Charges-1100 Specimen Charges- 500
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	1100	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1800	Testing Charges-1300 Specimen Charges- 500
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1300	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	Included in Tensile Strength
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	Included in Tensile Strength
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2100	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	2100	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	850	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1800	Testing Charges-1300 Specimen Charges- 500
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	Included in Tensile Strength
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	Included in Tensile Strength
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1600	Testing Charges-1100 Specimen Charges- 500
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1800	Testing Charges-1300 Specimen Charges- 500
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1800	Testing Charges-1300 Specimen Charges- 500
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	Included in Tensile Strength
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	Included in Tensile Strength
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	0	Included in Tensile Strength
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	0	Included in Tensile Strength
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1600	Testing Charges-1100 Specimen Charges- 500
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	1100	-

09 Aug, 2028

-
Included w.e.f.05.08.2025

4043

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

ALL

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Flexing resistance )	-	8500	-
4.2(Water absorption)	-	8500	-
4.2(Heat Shrinkage )	-	8500	-
4.2(Shrinkage at room temp)	-	8500	-
4.2(Split tear strength)	-	8500	-
4.2(Compression set)	-	8500	-
4.2(Hardness (Shore A))	-	8500	-
4.2(Density )	-	8500	-
4.2(Size & Thickness )	-	8500	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	8500	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	8500	-
5, 5.1(Marking)	-	8500	-
6, 6.1(Packing)	-	8500	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	8500	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	8500	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	8500	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	8500	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	8500	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	8500	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	8500	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	8500	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	8500	-
5, 5.1(Marking)	-	8500	-
6, 6.1(Packing)	-	8500	-
Cl.4.1.3 and 8.3,Table 1 ii(Thickness)	-	8500	-
Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N)	-	8500	-

-
Included w.e.f 08.12.2025

4044

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

Up to 32 mm Diameter

17725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	1050	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1000	-
Cl-7.2(Reversion Test)	-	1200	Testing charges -700 Specimen Charges-500
Cl-7.3(Tensile Test)	-	1800	Testing charges -1300 Specimen Charges-500
Cl-7.3.1(Test Piece)	-	0	included in tensile charges
Cl-7.3.2(Procedure)	-	0	included in tensile charges
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	included in Visual
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	1000	-
7.1 & Table 2(Hydraulic Characteristics)	-	3000	-
7.2(Reversion Test)	-	1200	Testing charges -700 Specimen Charges-500
7.3(Tensile Strength)	-	1800	Testing charges -1300 Specimen Charges-500
7.3(Elongation at Break)	-	1800	Testing charges -1300 Specimen Charges-500
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-
4.2(a)(Carbon Black Content-IS 2530)	-	925	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700	-

09 Aug, 2028

-
Included w.e.f.05.08.2025

4045

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

ALL

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	7500	-
Cl-5.1(Material)	-	7500	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	7500	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	7500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	7500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	7500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	7500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	7500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	7500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	7500	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	7500	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	7500	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	7500	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	7500	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	7500	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	7500	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	7500	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	7500	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	7500	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	7500	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	7500	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	7500	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	7500	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	7500	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	7500	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	7500	-
Cl 5.4(Lead)	-	7500	-
Cl 5.4(Cadmium)	-	7500	-
Cl 5.4(Arsenic)	-	7500	-
Cl-7(Dimension)	-	7500	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	7500	-

13 May, 2028

-
Included w.e.f 18.08.2025

4046

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 18380 (2023)

DOMESTIC ETHANOL COOKSTOVE WITH FIXED AND REMOVABLE CANISTER TYPE SPECIFICATION

ALL

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Fuel Capacity)	-	40000	-
Cl-4.1(Fixed Canister Type)	-	40000	-
Cl-4.2(Removable Canister Type)	-	40000	-
Cl-6.1(Materials)	-	40000	-
Cl-6.2(Fuel Canister)	-	40000	-
Cl-6.3(Plastic components)	-	40000	-
Cl-6.4(Cookstoves body)	-	40000	-
Cl-6.5(Holding part/handle of the lever)	-	40000	-
Cl-6.6(Fuel Tank)	-	40000	-
Cl-7(Shape and Dimensions)	-	40000	-
Cl-8(Construction)	-	40000	-
Cl-10(Workmanship and Finish)	-	40000	-
Cl-11(Stove Lever)	-	40000	-
Cl-12(Pan Supports)	-	40000	-
Cl-13(Strength and Rigidity of body of the Cookstove)	-	40000	-
Cl-15.1(Fixed/Removable Canister Type)	-	40000	-
Cl-16(Thermal Efficiency)	-	40000	-
Cl-17(Surface Temperature)	-	40000	-
Cl-18(Combustion Efficiency)	-	40000	-
Cl-19(Resistance to Draught)	-	40000	-
Cl-20(Fuel Creep)	-	40000	-
Cl-22(Instructions)	-	40000	-
Cl-4(Fuel Capacity)	-	40000	-
Cl-4.1(Fixed Canister Type)	-	40000	-
Cl-4.2(Removable Canister Type)	-	40000	-
Cl-6.1(Materials)	-	40000	-
Cl-6.2(Fuel Canister)	-	40000	-
Cl-6.3(Plastic components)	-	40000	-
Cl-6.4(Cookstoves body)	-	40000	-
Cl-6.5(Holding part/handle of the lever)	-	40000	-
Cl-6.6(Fuel Tank)	-	40000	-
Cl-7(Shape and Dimensions)	-	40000	-
Cl-8(Construction)	-	40000	-
Cl-10(Workmanship and Finish)	-	40000	-
Cl-11(Stove Lever)	-	40000	-
Cl-12(Pan Supports)	-	40000	-
Cl-13(Strength and Rigidity of body of the Cookstove)	-	40000	-
Cl-15.1(Fixed/Removable Canister Type)	-	40000	-
Cl-16(Thermal Efficiency)	-	40000	-
Cl-17(Surface Temperature)	-	40000	-
Cl-18(Combustion Efficiency)	-	40000	-
Cl-19(Resistance to Draught)	-	40000	-
Cl-20(Fuel Creep)	-	40000	-
Cl-22(Instructions)	-	40000	-

13 May, 2028

-
Included w.e.f.26.08.2025

4047

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17633 (2022)

Tables and Desks - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	500	-
ClAUSE 5(Dimensions)	-	500	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	5000	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1000	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1000	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	1000	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	2000	-
CLAUSE 7.3.1.1(Stated load)	-	1500	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	1500	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	1500	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	4000	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	4000	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	7000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	4000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	2000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	2000	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	-
CLAUSE 7.7(Deflection of Table Tops)	-	1500	-
CLAUSE 7.8(Durability of Tables with Castors)	-	7000	-
CLAUSE 7.9(Drop Test)	-	1500	-
Cl - 5(Dimensions)	-	0	-
Cl-6 (a)(Resistance to mechanical damage)	-	2500	-
Cl-6 (b)(Pencil hardness)	-	1000	-
Cl-6 (c)(Resistance to wet heat)	-	1500	-
Cl-6 (d)(Resistance to dry heat)	-	1500	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	1500	-
Cl-6 (g)(Adhesive performance)	-	1500	-
Cl-7.2.1(Stability Under Vertical Load)	-	0	Repeated
Cl-7.2.2(Stability with Extension Elements Open)	-	0	Repeated
Cl-7.2.3(Stability Under Horizontal Load)	-	0	Repeated
Cl-7.3.1(Strength under Vertical Static Force)	-	0	Repeated
Cl-7.3.2(Strength under horizontal static force)	-	0	Repeated
Cl-7.4.1(Durability under Vertical Force)	-	0	Repeated
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	0	Repeated
Cl-7.5.1(General)	-	0	Repeated
Cl-7.5.2(Durability under Horizontal Force)	-	0	Repeated
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	Repeated
Cl-7.6.1(General)	-	0	Repeated
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	Repeated
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	Repeated
Cl-7.7(Deflection of Table Tops)	-	0	Repeated
Cl-7.8(Durability of Tables with Castors)	-	0	Repeated
Cl-7.9(Drop Test)	-	0	Repeated
Cl-9(Marking)	-	0	Repeated
7.1(General test conditions)	-	0	Repeated
CLAUSE 4(Design and workmanship)	-	0	Repeated
ClAUSE 5(Dimensions)	-	0	Repeated
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	0	Repeated
CLAUSE 7.2.1(Stability Under Vertical Load)	-	0	Repeated
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	0	Repeated
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	0	Repeated
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	0	Repeated
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	0	Repeated
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	0	Repeated
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	0	Repeated
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	0	Repeated
CLAUSE 7.3.1.1(Stated load)	-	0	Repeated
CLAUSE 7.3.1.2(For occasional heavy loads)	-	0	Repeated
CLAUSE 7.3.2(Strength under horizontal static force)	-	0	Repeated
CLAUSE 7.4.1(Durability under Vertical Force)	-	0	Repeated
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	0	Repeated
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	0	Repeated
CLAUSE 7.5.2(Durability under Horizontal Force)	-	0	Repeated
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	Repeated
CLAUSE 7.6.1(Vertical Impact Test)	-	0	Repeated
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	Repeated
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	Repeated
CLAUSE 7.7(Deflection of Table Tops)	-	0	Repeated
CLAUSE 7.8(Durability of Tables with Castors)	-	0	Repeated
CLAUSE 7.9(Drop Test)	-	0	Repeated
Cl - 5(Dimensions)	-	0	Repeated
Cl-6 (a)(Resistance to mechanical damage)	-	0	Repeated
Cl-6 (b)(Pencil hardness)	-	0	Repeated
Cl-6 (c)(Resistance to wet heat)	-	0	Repeated
Cl-6 (d)(Resistance to dry heat)	-	0	Repeated
Cl-6 (e)(Resistance to marking by cold liquids)	-	0	Repeated
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	0	Repeated
Cl-6 (g)(Adhesive performance)	-	0	Repeated
Cl-7.2.1(Stability Under Vertical Load)	-	0	Repeated
Cl-7.2.2(Stability with Extension Elements Open)	-	0	Repeated
Cl-7.2.3(Stability Under Horizontal Load)	-	0	Repeated
Cl-7.3.1(Strength under Vertical Static Force)	-	0	Repeated
Cl-7.3.2(Strength under horizontal static force)	-	0	Repeated
Cl-7.4.1(Durability under Vertical Force)	-	0	Repeated
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	0	Repeated
Cl-7.5.1(General)	-	0	Repeated
Cl-7.5.2(Durability under Horizontal Force)	-	0	Repeated
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	Repeated
Cl-7.6.1(General)	-	0	Repeated
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	Repeated
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	Repeated
Cl-7.7(Deflection of Table Tops)	-	0	Repeated
Cl-7.8(Durability of Tables with Castors)	-	0	Repeated
Cl-7.9(Drop Test)	-	0	Repeated
Cl-9(Marking)	-	0	Repeated
7.1(General test conditions)	-	0	Repeated
CLAUSE 4(Design and workmanship)	-	0	Repeated
ClAUSE 5(Dimensions)	-	0	Repeated
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	0	Repeated
CLAUSE 7.2.1(Stability Under Vertical Load)	-	0	Repeated
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	0	Repeated
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	0	Repeated
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	0	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	0	Repeated
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	0	Repeated
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	0	Repeated
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	0	Repeated
CLAUSE 7.3.1.1(Stated load)	-	0	Repeated
CLAUSE 7.3.1.2(For occasional heavy loads)	-	0	Repeated
CLAUSE 7.3.2(Strength under horizontal static force)	-	0	Repeated
CLAUSE 7.4.1(Durability under Vertical Force)	-	0	Repeated
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	0	Repeated
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	0	Repeated
CLAUSE 7.5.2(Durability under Horizontal Force)	-	0	Repeated
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	Repeated
CLAUSE 7.6.1(Vertical Impact Test)	-	0	Repeated
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	Repeated
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	Repeated
CLAUSE 7.7(Deflection of Table Tops)	-	0	Repeated
CLAUSE 7.8(Durability of Tables with Castors)	-	0	Repeated
CLAUSE 7.9(Drop Test)	-	0	Repeated
Cl - 5(Dimensions)	-	0	Repeated
Cl-6 (a)(Resistance to mechanical damage)	-	0	Repeated
Cl-6 (b)(Pencil hardness)	-	0	Repeated
Cl-6 (c)(Resistance to wet heat)	-	0	Repeated
Cl-6 (d)(Resistance to dry heat)	-	0	Repeated
Cl-6 (e)(Resistance to marking by cold liquids)	-	0	Repeated
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	0	Repeated
Cl-6 (g)(Adhesive performance)	-	0	Repeated
CLAUSE 4(Design and workmanship)	-	0	Repeated
ClAUSE 5(Dimensions)	-	0	Repeated
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	0	Repeated
CLAUSE 7.2.1(Stability Under Vertical Load)	-	0	Repeated
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	0	Repeated
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	0	Repeated
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	0	Repeated
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	0	Repeated
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	0	Repeated
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	0	Repeated
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	0	Repeated
CLAUSE 7.3.1.1(Stated load)	-	0	Repeated
CLAUSE 7.3.1.2(For occasional heavy loads)	-	0	Repeated
CLAUSE 7.3.2(Strength under horizontal static force)	-	0	Repeated
CLAUSE 7.4.1(Durability under Vertical Force)	-	0	Repeated
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	0	Repeated
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	0	Repeated
CLAUSE 7.5.2(Durability under Horizontal Force)	-	0	Repeated
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	Repeated
CLAUSE 7.6.1(Vertical Impact Test)	-	0	Repeated
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	Repeated
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	Repeated
CLAUSE 7.7(Deflection of Table Tops)	-	0	Repeated
CLAUSE 7.8(Durability of Tables with Castors)	-	0	Repeated
CLAUSE 7.9(Drop Test)	-	0	Repeated
Cl - 5(Dimensions)	-	0	Repeated
Cl-6 (a)(Resistance to mechanical damage)	-	0	Repeated
Cl-6 (b)(Pencil hardness)	-	0	Repeated
Cl-6 (c)(Resistance to wet heat)	-	0	Repeated
Cl-6 (d)(Resistance to dry heat)	-	0	Repeated
Cl-6 (e)(Resistance to marking by cold liquids)	-	0	Repeated
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	0	Repeated
Cl-6 (g)(Adhesive performance)	-	0	Repeated
Cl-7.2.1(Stability Under Vertical Load)	-	0	Repeated
Cl-7.2.2(Stability with Extension Elements Open)	-	0	Repeated
Cl-7.2.3(Stability Under Horizontal Load)	-	0	Repeated
Cl-7.3.1(Strength under Vertical Static Force)	-	0	Repeated
Cl-7.3.2(Strength under horizontal static force)	-	0	Repeated
Cl-7.4.1(Durability under Vertical Force)	-	0	Repeated
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	0	Repeated
Cl-7.5.1(General)	-	0	Repeated
Cl-7.5.2(Durability under Horizontal Force)	-	0	Repeated
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	Repeated
Cl-7.6.1(General)	-	0	Repeated
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	Repeated
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	Repeated
Cl-7.7(Deflection of Table Tops)	-	0	Repeated
Cl-7.8(Durability of Tables with Castors)	-	0	Repeated
Cl-7.9(Drop Test)	-	0	Repeated
Cl-9(Marking)	-	0	Repeated
7.1(General test conditions)	-	0	Repeated

19 Jul, 2027

-
Included w.e.f 01.09.2025

4048

Classic Testing & Research Centre (B17), Noida

8180826

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	5000	-
5(Construction)	-	7000	-
6.3(Cooling Capacity Test)	-	10000	-
6.4(Maximum Operating Condition Test)	-	7000	-
6.5(Pull Down Test)	-	5000	-
9(Maximum Power Consumption Test)	-	7000	-
10(Annual Energy Consumption Test)	-	10000	-
11(Storage Capacity Test)	-	10000	-
13(Functional Test)	-	5000	-
14 a)(Protection against electric shock)	-	5000	-
14 b)(High voltage (electric strength) test)	-	5000	-
14 c)(Leakage current tests)	-	5000	-
14 d)(Provision for earthing)	-	5000	-

15 Oct, 2027

-
Included w.e.f 11.08.2025

4049

Aaditech Test and Calibration Lab LLP

8179926

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

There rated voltage not exceed 250V, ac for single phase or 440V ac for three phase.

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	1000	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
3.1(Sizes )	-	500	-
4.1(Rated Voltage)	-	500	-
5.1(Rated frequency)	-	500	-
6.1(Design and General Construction)	-	500	-
6.3(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
6.1(Design and General Construction)	-	0	-
6.11(Design and General Construction)	-	0	-
6.12(Design and General Construction)	-	0	-
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	100	-
11.1(Interchangeability)	-	1000	-
14.2 & 15.1(Air Delivery)	-	3000	-
14.3.A(Temperature-Rise (for motors))	-	2000	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.B(Temperature-Rise (for regulators))	-	1000	-
14.3.B(Temperature-Rise (for regulators))	-	0	-
14.3.B(Moistureproofness (for regulators only))	-	3000	-
14.3.B(Moistureproofness (for regulators only))	-	0	-
14.5(Mechanical Endurance (for regulators only))	-	2000	-
14.1 & 14.6(Power factor)	-	500	-
14.7(ac leakage)	-	500	-
14.8(High voltage test)	-	500	-
14.9(Insulation-Resistance)	-	500	-
14.1(Earthing continuity)	-	500	-
14.11 & 15.1(Electrical Input)	-	500	-
14.12 & 16(Fan Speed)	-	500	-
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
3.1(Sizes )	-	0	-
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
6.1(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
6.1(Design and General Construction)	-	0	-
6.11(Design and General Construction)	-	0	-
6.12(Design and General Construction)	-	0	-
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	0	-
11.1(Interchangeability)	-	0	-
14.2 & 15.1(Air Delivery)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.4(Moistureproofness (for regulators only))	-	0	-
14.4(Moistureproofness (for regulators only))	-	0	-
14.5(Mechanical Endurance (for regulators only))	-	0	-
14.1 & 14.6(Power factor)	-	0	-
14.7(ac leakage)	-	0	-
14.8(High voltage test)	-	0	-
14.9(Insulation-Resistance)	-	0	-
14.1(Earthing continuity)	-	0	-
14.11 & 15.1(Electrical Input)	-	0	-
14.12 & 16(Fan Speed)	-	0	-
14.13(Flash Test)	-	0	-
12(Silent Operation)	-	0	-
Cl-16(Tolerances on ratings)	-	0	-
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
3.1(Sizes )	-	0	-
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
6.1(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
6.1(Design and General Construction)	-	0	-
6.11(Design and General Construction)	-	0	-
6.12(Design and General Construction)	-	0	-
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	0	-
11.1(Interchangeability)	-	0	-
14.2 & 15.1(Air Delivery)	-	0	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3.B(Temperature-Rise (for regulators))	-	0	-
14.3.B(Temperature-Rise (for regulators))	-	0	-
14.3.B(Moistureproofness (for regulators only))	-	0	-
14.3.B(Moistureproofness (for regulators only))	-	0	-
14.5(Mechanical Endurance (for regulators only))	-	0	-
14.1 & 14.6(Power factor)	-	0	-
14.7(ac leakage)	-	0	-
14.8(High voltage test)	-	0	-
14.9(Insulation-Resistance)	-	0	-
14.1(Earthing continuity)	-	0	-
14.11 & 15.1(Electrical Input)	-	0	-
14.12 & 16(Fan Speed)	-	0	-
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
3.1(Sizes )	-	0	-
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
6.1(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
6.1(Design and General Construction)	-	0	-
6.11(Design and General Construction)	-	0	-
6.12(Design and General Construction)	-	0	-
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	0	-
11.1(Interchangeability)	-	0	-
14.2 & 15.1(Air Delivery)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.3(Temperature-Rise)	-	0	-
14.4(Moistureproofness (for regulators only))	-	0	-
14.4(Moistureproofness (for regulators only))	-	0	-
14.5(Mechanical Endurance (for regulators only))	-	0	-
14.1 & 14.6(Power factor)	-	0	-
14.7(ac leakage)	-	0	-
14.8(High voltage test)	-	0	-
14.9(Insulation-Resistance)	-	0	-
14.1(Earthing continuity)	-	0	-
14.11 & 15.1(Electrical Input)	-	0	-
14.12 & 16(Fan Speed)	-	0	-
14.13(Flash Test)	-	0	-
12(Silent Operation)	-	0	-
Cl-16(Tolerances on ratings)	-	0	-

-
Included w.e.f. 18.08.2025

4050

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 13893 (1994)

Polyurethane soles semirigid - specification

ALL

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	500	-
4.3(Ross Flex test)	-	500	-
4.3(Flexural strength )	-	500	-
4.3(Abrasion Resistance)	-	500	-
4.3(Elongation at break)	-	500	-
4.3(Tensile Strength )	-	500	-
4.3(Hardness Shore(A))	-	500	-
4.3(Relative density )	-	500	-
4.2(Thickness )	-	300	-
4.1(Design)	-	500	-
5, 5.1, 5.2(Packing And Marking)	-	400	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	300	-
4.2 (Amendment 2)(Thickness)	-	400	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	500	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	500	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	500	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	500	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-
4.3.2(Ageing test)	-	500	-
4.3(Ross Flex test)	-	700	-
4.3(Flexural strength )	-	700	-
4.3(Abrasion Resistance)	-	500	-
4.3(Elongation at break)	-	500	-
4.3(Tensile Strength )	-	500	-
4.3(Hardness Shore(A))	-	500	-
4.3(Relative density )	-	500	-
4.2(Thickness )	-	500	-
4.1(Design)	-	500	-
5, 5.1, 5.2(Packing And Marking)	-	500	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	500	-
4.2 (Amendment 2)(Thickness)	-	500	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	500	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	500	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	500	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	500	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-
4.3.2(Ageing test)	-	-	-
4.3(Ross Flex test)	-	-	-
4.3(Flexural strength )	-	-	-
4.3(Abrasion Resistance)	-	-	-
4.3(Elongation at break)	-	-	-
4.3(Tensile Strength )	-	-	-
4.3(Hardness Shore(A))	-	-	-
4.3(Relative density )	-	-	-
4.2(Thickness )	-	-	-
4.1(Design)	-	-	-
5, 5.1, 5.2(Packing And Marking)	-	-	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	-	-
4.2 (Amendment 2)(Thickness)	-	-	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	-	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	-	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	-	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	-	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	-	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	-	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	-	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	-	-

-
Included w.e.f 08.12.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number