BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14051 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4081

Robust Testing Solutions Private Limited, Alwar

8173526

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

5 kVA to 2500 kVA, 11kV, 22kV and 33kV

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	7000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	5500	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	5500	-
21.2 d)(Measurement of no-load loss and current)	-	3500	-
21.2 e)(Measurement of insulation resistance)	-	2500	-
21.2 f)(Induced over-voltage withstand test)	-	4500	-
21.2 g)( Separate-source voltage withstand test)	-	4000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	7000	-
21.5.3.3(Oil leakage test)	-	8000	-
21.3(a )(Lightning impulse test)	-	38000	-
21.3(b)(Temperature-rise test)	-	22000	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	7000	-
21.4 a)( Determination of sound levels)	-	0	-
21.4 c(No load current at 112.5 percent voltage.)	-	1000	-
21.4 e(BDV and moisture content of oil in the transformer)	-	8000	-
13(Marking )	-	0	-
13.1(Marking (Rating Plates))	-	0	-
13.2(Terminal Marking Plate)	-	0	-
13.3(Marking )	-	0	-
13.4(Marking)	-	0	-
13.4.1(Marking)	-	0	-
14.1(MOUNTING ARRANGEMENT)	-	0	-
14.2(MOUNTING ARRANGEMENT)	-	0	-
14.3(MOUNTING ARRANGEMENT)	-	0	-
14.4(MOUNTING ARRANGEMENT)	-	0	-
15.1.1(TRANSFORMER TANK : Construction)	-	0	-
15.1.2(TRANSFORMER TANK : Construction)	-	0	-
15.1.3(TRANSFORMER TANK : Construction)	-	0	-
15.1.4(TRANSFORMER TANK : Construction)	-	0	-
15.1.5(TRANSFORMER TANK : Construction)	-	0	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	8000	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	8000	-
21.5.2.3( Oil leakage test (routine test))	-	8000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	6000	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	6000	-
21.5.3.3(Oil leakage test (routine test))	-	8000	-
21.4 d(Paint adhesion tests)	-	0	-
15.5(Total Dry Film Paint Thickness)	-	0	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	0	-
11(Minimum Clearnaces air )	-	0	-
16(Conservator for Non-sealed type Transformers)	-	0	-
20(Fittings)	-	0	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	7000	-
9.1a)(CRGO Electrical Steel)	-	0	-
9.1 b)(Amorphous core material)	-	0	-
9.1 c)(Copper/Aluminium conductor)	-	0	-
9.1 d)(Kraft paper)	-	0	-
9.1 e)(Press Board)	-	0	-
9.1 f)(Mineral oil)	-	0	-
10(Terminal arrangment )	-	0	-
15.2(Pressure and Vacuum Requirements)	-	0	-
15.4(Gasket)	-	0	-
19(Tolerances)	-	0	-
18(Efficiency and Regulation)	-	0	-
4(Service Conditions)	-	0	-
5(General )	-	0	-
6.1(Rating)	-	0	-
6.2(Rated frequency)	-	0	-
6.3(Nominal system voltage)	-	0	-
6.4(Basic Insulation level )	-	0	-
7(Technical Parameters of three phase distribution trasnformers higher than 200kva)	-	0	-
8(Technical Parameters of single phase distribution transformers UP to and including 25 KVA )	-	0	-
9(Standard Materials)	-	0	-
12(Connectors )	-	0	-
14(Mounting arrangement)	-	0	-
15(Trasnformer Tank )	-	0	-
16(Conservator for Non-Sealed type Transformers)	-	0	-
17(Ability of transformers to withstand external Short circuit )	-	0	-
19(Tolerances)	-	0	-
21(General )	-	0	-
22(Information required with enquiry and order )	-	0	-
11(Minimum clearance in Air)	-	0	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
10(Terminal Arrangement)	-	0	-
6.5(No-Load Voltage Ratios)	-	0	-
6.6(Winding connections and phase displacement)	-	0	-
6.7(Tapping Range and Tapping Method)	-	0	-
6.8(Losses and impedance values)	-	0	-
6.9(Permissible Flux Density and Over Fluxing )	-	0	-
20(Fittings)	-	0	-
6.1(Limits of Temperature-rise)	-	0	-
18(Efficiency and regulation)	-	0	-
21.2 a)(Measurement of winding resistance )	-	-	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	-	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	-	-
21.2 d)(Measurement of no-load loss and current)	-	-	-
21.2 e)(Measurement of insulation resistance)	-	-	-
21.2 f)(Induced over-voltage withstand test)	-	-	-
21.2 g)( Separate-source voltage withstand test)	-	-	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	-	-
21.5.3.3(Oil leakage test)	-	-	-
21.3(a )(Lightning impulse test)	-	-	-
21.3(b)(Temperature-rise test)	-	-	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	-	-
21.4 a)( Determination of sound levels)	-	-	-
21.4 c(No load current at 112.5 percent voltage.)	-	-	-
21.4 e(BDV and moisture content of oil in the transformer)	-	-	-
13(Marking )	-	-	-
13.1(Marking (Rating Plates))	-	-	-
13.2(Terminal Marking Plate)	-	-	-
13.3(Marking )	-	-	-
13.4(Marking)	-	-	-
13.4.1(Marking)	-	-	-
14.1(MOUNTING ARRANGEMENT)	-	-	-
14.2(MOUNTING ARRANGEMENT)	-	-	-
14.3(MOUNTING ARRANGEMENT)	-	-	-
14.4(MOUNTING ARRANGEMENT)	-	-	-
15.1.1(TRANSFORMER TANK : Construction)	-	-	-
15.1.2(TRANSFORMER TANK : Construction)	-	-	-
15.1.3(TRANSFORMER TANK : Construction)	-	-	-
15.1.4(TRANSFORMER TANK : Construction)	-	-	-
15.1.5(TRANSFORMER TANK : Construction)	-	-	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	-	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	-	-
21.5.2.3( Oil leakage test (routine test))	-	-	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	-	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	-	-
21.5.3.3(Oil leakage test (routine test))	-	-	-
21.4 d(Paint adhesion tests)	-	-	-
15.5(Total Dry Film Paint Thickness)	-	-	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	-	-
11(Minimum Clearnaces air )	-	-	-
16(Conservator for Non-sealed type Transformers)	-	-	-
20(Fittings)	-	-	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	-	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	-	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	-	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	-	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	-	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	-	-
9.1a)(CRGO Electrical Steel)	-	-	-
9.1 b)(Amorphous core material)	-	-	-
9.1 c)(Copper/Aluminium conductor)	-	-	-
9.1 d)(Kraft paper)	-	-	-
9.1 e)(Press Board)	-	-	-
9.1 f)(Mineral oil)	-	-	-
10(Terminal arrangment )	-	-	-
15.2(Pressure and Vacuum Requirements)	-	-	-
15.4(Gasket)	-	-	-
19(Tolerances)	-	-	-
18(Efficiency and Regulation)	-	-	-
4(Service Conditions)	-	-	-
5(General )	-	-	-
6.1(Rating)	-	-	-
6.2(Rated frequency)	-	-	-
6.3(Nominal system voltage)	-	-	-
6.4(Basic Insulation level )	-	-	-
7(Technical Parameters of three phase distribution trasnformers higher than 200kva)	-	-	-
8(Technical Parameters of single phase distribution transformers UP to and including 25 KVA )	-	-	-
9(Standard Materials)	-	-	-
12(Connectors )	-	-	-
14(Mounting arrangement)	-	-	-
15(Trasnformer Tank )	-	-	-
16(Conservator for Non-Sealed type Transformers)	-	-	-
17(Ability of transformers to withstand external Short circuit )	-	-	-
19(Tolerances)	-	-	-
21(General )	-	-	-
22(Information required with enquiry and order )	-	-	-
11(Minimum clearance in Air)	-	-	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	-	-
10(Terminal Arrangement)	-	-	-
6.5(No-Load Voltage Ratios)	-	-	-
6.6(Winding connections and phase displacement)	-	-	-
6.7(Tapping Range and Tapping Method)	-	-	-
6.8(Losses and impedance values)	-	-	-
6.9(Permissible Flux Density and Over Fluxing )	-	-	-
20(Fittings)	-	-	-
6.1(Limits of Temperature-rise)	-	-	-
18(Efficiency and regulation)	-	-	-

02 Aug, 2026

-
Included w.e.f 14.07.2025 Exclusion: CL 17 ( ABILITY OF TRANSFORMERS TO WITHSTAND EXTERNAL SHORT CIRCUIT ) CL 21.3(c) (Short-circuit withstand test) CL 21.4 b (Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA)), 21.4 e (BDV and moisture content of oil in the transformer), 17 (Ability of transformers to withstand external Short circuit )

4082

BIS, Southern Regional Laboratory (SRL)

None

IS 797 (2023)

COMMON SALT FOR CHEMICAL INDUSTRIES SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Moisture Content)	-
Cl-4.3, Table-1 (i) (Sodium chloride (as NaCl), percent by mass, Min)	-
Cl-4.3, Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, Table-1 (iii) (Calcium salts (as Ca), percent by mass, Max)	-
Cl-4.3, Table-1 (iv) (Magnesium salts (as Mg), percent by mass, Max)	-
Cl-4.3, Table-1 (v) (Sulphates (as SO4 ), percent by mass, Max)	-
Cl-4.3, Table-1 (vi) (Iron compound (as Fe), ppm, Max)	-
Cl-4.3.1 (Sulphate (as SO4))	-
Cl-4.3.1 (Iron)	-
Cl-4.3.1 (Alkalinity)	-
Cl-4.1 (Description)	-

-
-

4083

ATCC TEST LABS LLP

8172626

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

Electric Cables for Photovoltaic Systems for Rated Voltage 1500 V d.c.

1025000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	5000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	75000	-
IS 191 : 2007, IS 440(Copper purity test)	-	6000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	5000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	5000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	75000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	8000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	8000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	500000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	15000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	50000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	15000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	500000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	5000	-
11.3.2(Sheath Marking)	-	5000	-
11.3.3(Overall Diameters and Ovality)	-	5000	-
Annex J(Assessment of Halogens)	-	5000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	5000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	5000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	5000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	5000	-
5.2(Application to the Conductor)	-	5000	-
5.3(Thickness)	-	5000	-
6.2(Sheath application)	-	5000	-
6.3(Sheath Thickness)	-	5000	-
6.4(Sheath Colour)	-	5000	-
7(Overall Dimension)	-	5000	-
8.1(Continuity of Marking)	-	5000	-
8.2(Durability)	-	5000	-
8.3(Legibility)	-	5000	-
9(Core Identification)	-	5000	-
12(Packing and Marking)	-	5000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	5000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	5000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	50000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	5000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	500	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	500	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	5000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	50000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	5000	-
11.3.2(Sheath Marking)	-	5000	-
11.3.3(Overall Diameters and Ovality)	-	5000	-
Annex J(Assessment of Halogens)	-	5000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	5000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	5000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	5000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	50000	-
5.2(Application to the Conductor)	-	5000	-
5.3(Thickness)	-	5000	-
6.2(Sheath application)	-	5000	-
6.3(Sheath Thickness)	-	5000	-
6.4(Sheath Colour)	-	5000	-
7(Overall Dimension)	-	5000	-
8.1(Continuity of Marking)	-	5000	-
8.2(Durability)	-	5000	-
8.3(Legibility)	-	5000	-
9(Core Identification)	-	5000	-
12(Packing and Marking)	-	5000	-
4.1(Resistance)	-	500	-
7.1.2.1, 7.2.3(Annealing)	-	500	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	5000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	5000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	5000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	5000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	500000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	5000	-
11.3.2(Sheath Marking)	-	500	-
11.3.3(Overall Diameters and Ovality)	-	5000	-
Annex J(Assessment of Halogens)	-	5000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	500000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	5000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	5000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	5000	-
5.2(Application to the Conductor)	-	5000	-
5.3(Thickness)	-	5000	-
6.2(Sheath application)	-	5000	-
6.3(Sheath Thickness)	-	5000	-
6.4(Sheath Colour)	-	5000	-
7(Overall Dimension)	-	5000	-
8.1(Continuity of Marking)	-	5000	-
8.2(Durability)	-	5000	-
8.3(Legibility)	-	5000	-
9(Core Identification)	-	5000	-
12(Packing and Marking)	-	5000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	5000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-

15 Jun, 2026

-
Included w.e.f.29.04.2025

4084

Testtex India Laboratories Private Limited, Noida

8138306

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

Safety Footwear

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	200	-
Cl 5.2.2, Table 4(" Height of upper ")	-	200	-
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	200	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	700	-
Cl 5.3.2.1(Toe protection - general)	-	200	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	3000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	500	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	2000	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.2(Thickness)	-	200	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	3500	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	200	-
Cl 5.8.2.2(Cleated area)	-	200	-
Cl 5.8.2.3(Cleat height)	-	200	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	3500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	200	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	200	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	3000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	3500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	3500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	200	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	2000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	200	-
Cl 6.2.8.3(Resistance to cutting)	-	4000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	2000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	200	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	200	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	200	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	750	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	5000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	6000	-
Cl 7, Table 20("Marking ")	-	0	-

31 Dec, 2026

-
Included w.e.f 12.09.2025 Exclusion: Cl 6.2.7 (Ankle protection)

4085

BIS, Central Laboratory (CL)

None

IS 4783 (2024)

Thiram powder for dry seed treatment - Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description - IS 4783:2024)	-
3.2.2 (Colour - IS 4783:2024)	-
3.2.3 (Sieving Requirement 150 micron sieve - IS 4783:2024)	-
3.3.1. (Thiram Content - IS 4320:2024)	-
CL.3.3.1 (Thiram Content)	-

-
-

4086

FARE Labs Pvt. Ltd., Gurugram

8135716

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

All inclusive

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Form and Description)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no i)(Sodium carbonate (as Na2CO3), percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no ii)(Sodium hydroxide (as NaOH), percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no iii)(Chlorides (as Cl– ), percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no iv)(Sulphates (as SO4), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no v)(Silicates (as SiO2), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vi)(Iron (as Fe))	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no vii)(Copper)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no viii)(Manganese)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no ix)(Chlorates and per-chlorates)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no x)(Matter insoluble water, percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no xi)(Total mercury)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xii)(Sodium hydroxide)	-	600	-
5.2(Marking)	-	400	-

09 Mar, 2026

-
Included. w.e.f 15.04.2025

4087

Unique Test House

9134536

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

ALL SIZE /GRADE TYPE

14000 View breakup
-

07 Sep, 2028

-
Included w.e.f.20.03.2025

4088

Electrical Research and Development Association (ERDA), Vadodara, Gujarat

7101125

IS 13340 : PART 1 (2024)

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 1 General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Second Revision)

267790 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Capacitance measurement and output calculation)	-	1365	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	2730	-
9(Voltage tests between terminals)	-	1365	-
10(Voltage tests between terminals and container)	-	1365	-
11(Voltage tests between terminals and container)	-	700	-
12(Sealing test)	-	1365	-
13(Thermal stability test)	-	26650	For 0-4 kVar 12300 Rs. , 5-10 kVar 13650 Rs. , 11-25 kVar 16400 Rs., 26-50 kVar 26650 Rs.
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	3450	-
15(Lightning impulse voltage test between terminals and container)	-	8610	-
16(Discharge test)	-	8195	Including All pre and post tests charges
17(Ageing test)	-	158665	For 0-10 kVar 1,26,945 1,24,215 Rs. , 11-25 kVar 1,31,895 Rs., 26-50 kVar 1,58,665 Rs., Including All pre and post tests charges
18(Self-healing test)	-	7530	0-25 kVar 6830 Rs. , 25-50 kVar 7530 Rs.
19(Destruction test)	-	45800	0-25 kVar 23250 Rs. 25-50 kVar 45800 Rs. Including all pre and post tests.
22(Discharge device)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	2730	-
9(Voltage tests between terminals)	-	1365	-
10(Voltage tests between terminals and container)	-	1365	-
11(Voltage tests between terminals and container)	-	700	-
12(Sealing test)	-	1365	-
13(Thermal stability test)	-	26650	For 0-4 kVar 12300 Rs. , 5-10 kVar 13650 Rs. , 11-25 kVar 16400 Rs., 26-50 kVar 26650 Rs.
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	3450	-
15(Lightning impulse voltage test between terminals and container)	-	8610	-
16(Discharge test)	-	8195	Including All pre and post tests charges
17(Ageing test)	-	158665	For 0-10 kVar 1,26,945 1,24,215 Rs. , 11-25 kVar 1,31,895 Rs., 26-50 kVar 1,58,665 Rs., Including All pre and post tests charges
18(Self-healing test)	-	7530	0-25 kVar 6830 Rs. , 25-50 kVar 7530 Rs.
19(Destruction test)	-	45800	0-25 kVar 23250 Rs. 25-50 kVar 45800 Rs. Including all pre and post tests.
22(Discharge device)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	2730	-
9(Voltage tests between terminals)	-	1365	-
10(Voltage tests between terminals and container)	-	1365	-
12(Sealing test)	-	1365	-
13(Thermal stability test)	-	26650	For 0-4 kVar 12300 Rs. , 5-10 kVar 13650 Rs. , 11-25 kVar 16400 Rs., 26-50 kVar 26650 Rs.
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	3450	-
15(Lightning impulse voltage test between terminals and container)	-	8610	-
16(Discharge test)	-	8195	-
11(Voltage tests between terminals and container)	-	1365	-
17(Ageing test)	-	158665	For 0-10 kVar 1,26,945 1,24,215 Rs. , 11-25 kVar 1,31,895 Rs., 26-50 kVar 1,58,665 Rs., Including All pre and post tests charges
18(Self-healing test)	-	7530	0-25 kVar 6830 Rs. , 25-50 kVar 7530 Rs.
19(Destruction test)	-	45800	0-25 kVar 23250 Rs. 25-50 kVar 45800 Rs. Including all pre and post tests.
22(Discharge device)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-

30 Nov, 2028

-
-

4089

HITECHLAB HEALTHCARE & RESEARCH CENTRE LLP, AHMEDABAD

7131116

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	100	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	250	charge is for individual parameter and total charge for Table-1 parameters will be Rs.1500
Cl-5.3, Table-1 (ii)(Odour)	-	200	charge is for individual parameter and total charge for Table-1 parameters will be Rs.1500
Cl-5.3, Table-1 (iii)(Taste)	-	300	charge is for individual parameter and total charge for Table-1 parameters will be Rs.1500
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	charge is for individual parameter and total charge for Table-1 parameters will be Rs.1500
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	400	charge is for individual parameter and total charge for Table-1 parameters will be Rs.1500
Cl-5.3, Table-1 (vi)(pH)	-	150	charge is for individual parameter and total charge for Table-1 parameters will be Rs.1500
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	450	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	250	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	250	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	250	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	250	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	300	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	300	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	300	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	300	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	300	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	300	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	500	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	500	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xxii)(Sulphide)	-	300	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1500	charge is for individual parameter and total charge for Table-2 parameters will be Rs.8000
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	350	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	350	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	350	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	400	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	350	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	350	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	350	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1000	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
Cl-5.3, Table-3 (x)(Uranium)	-	500	charge is for individual parameter and total charge for Table-3 parameters will be Rs.5000
5.4 i)(p,p DDD)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(o,p DDD)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(p,p DDE)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4, i)(o,p DDE)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(p,p DDT)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(o,p DDT)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(alpha-HCH)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4/Annex D/iii(β- HCH)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Delta-HCH)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Gamma-HCH (Lindane))	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(alpha-Endosulfan)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(beta-Endosulfan)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Endosulfan Sulphate)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Monocrotophos)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Ethion)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Chlorpyrifos)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Phorate)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Phorate sulphoxide)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Phorate sulphone)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(2,4-D)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Butachlor)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Isoproturon)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Alachlor)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Atrazine)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Methyl Parathion)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Methyl Paraoxon)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Malathion)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Aldrin)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
5.4 i)(Dieldrin)	-	2000	charge is for individual parameter and Total Pesticides Mentioned in table of Annexure D- 4000
Cl-5.4 (ii)(Total pesticide residue)	-	4000	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	300	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.2(Coliform)	-	300	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.3(Staphylococcus aureus)	-	400	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.3(Faecal streptococci)	-	300	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	400	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.5(Pseudomonas Aeruginosa)	-	400	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	250	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.7(Yeast and mould)	-	300	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.8(Salmonella)	-	400	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.8(shigella)	-	400	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.9(Vibrio cholera)	-	400	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
Cl-5.2.9(V.parahaemolyticus)	-	400	charge is for individual parameter and total charge for Complete Testing of Microbiological Parameters will be Rs. 4000.
5.3/Table 2/xiii(Suphate)	-	300	-
5.4/Annex D/i(P,P-DDT)	-	2000	-
5.4/Annex D/ii(Lindane)	-	2000	-
5.4/Annex D/iv(b-Endosulfan)	-	2000	-
5.4/Annex D/xvi(Dieldrin)	-	2000	-
5.4/Annex D/xvi(Aldrin)	-	2000	-
5.4/Annex D/i(O,P-DDT)	-	2000	-
5.4/Annex D/iv(a-Endosulfan)	-	2000	-
5.4/Annex D/iii(d-HCH)	-	2000	-
5.4/Annex D/i(O,P-DDD)	-	2000	-
5.4/Annex D/i(P,P-DDE)	-	2000	-
5.4/Annex D/i(O,P-DDE)	-	2000	-
5.4/Annex D/iii(a-HCH)	-	2000	-
5.4/Annex D/iv(Endosulfan sulfate)	-	2000	-
5.4/Annex D/i(P,P-DDD)	-	2000	-
5.4/Annex D/xii(Alachlor)	-	2000	-
5.4/Annex D/vii(Chlorpyrifos)	-	2000	-
5.4/Annex D/x(Butachlor)	-	2000	-
5.4/Annex D/vi(Ethion)	-	2000	-
5.4/Annex D/xiv(Methyl parathion)	-	2000	-
5.4/Annex D/xv(Malathion)	-	2000	-
5.4/Annex D/viii(Phorate)	-	2000	-
5.4/Annex D/v(Monochrotophos)	-	2000	-
5.4/Annex D/xiii(Atrazine)	-	2000	-
5.4/Annex D/viii(Phorate sulphoxide)	-	2000	-
5.4/Annex D/viii(Phorate sulfone)	-	2000	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	2000	-
5.4/Annex D/xxviii(Malaoxon)	-	2000	-
5.4/Annex D/xi(Isoproturon)	-	2000	-
5.4/Annex D/ix(2,4 –D)	-	2000	-
Cl-5.1(General Requirements)	-	100	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	2000	-
Table 3, x)(Uranium)	-	500	-
5.4 i)(beta-HCH)	-	2000	-
5.3(Appearance)	-	100	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	250	-
Cl-5.3, Table-1 (ii)(Odour)	-	200	-
Cl-5.3, Table-1 (iii)(Taste)	-	300	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	400	-
Cl-5.3, Table-1 (vi)(pH)	-	150	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	450	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	250	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	250	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	250	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	250	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	300	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	300	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	300	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	300	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	300	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	300	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	500	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	500	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	300	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	350	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	350	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	350	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	400	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	350	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	350	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	350	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
Cl-5.3, Table-3 (x)(Uranium)	-	500	-
5.4 i)(p,p DDD)	-	2000	-
5.4 i)(o,p DDD)	-	2000	-
5.4 i)(p,p DDE)	-	2000	-
5.4, i)(o,p DDE)	-	2000	-
5.4 i)(p,p DDT)	-	2000	-
5.4 i)(o,p DDT)	-	2000	-
5.4 i)(alpha-HCH)	-	2000	-
5.4/Annex D/iii(β- HCH)	-	2000	-
5.4 i)(Delta-HCH)	-	2000	-
5.4 i)(Gamma-HCH (Lindane))	-	2000	-
5.4 i)(alpha-Endosulfan)	-	2000	-
5.4 i)(beta-Endosulfan)	-	2000	-
5.4 i)(Endosulfan Sulphate)	-	2000	-
5.4 i)(Monocrotophos)	-	2000	-
5.4 i)(Ethion)	-	2000	-
5.4 i)(Chlorpyrifos)	-	2000	-
5.4 i)(Phorate)	-	2000	-
5.4 i)(Phorate sulphoxide)	-	2000	-
5.4 i)(Phorate sulphone)	-	2000	-
5.4 i)(2,4-D)	-	2000	-
5.4 i)(Butachlor)	-	2000	-
5.4 i)(Isoproturon)	-	2000	-
5.4 i)(Alachlor)	-	2000	-
5.4 i)(Atrazine)	-	2000	-
5.4 i)(Methyl Parathion)	-	2000	-
5.4 i)(Methyl Paraoxon)	-	2000	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	2000	-
5.4 i)(Malathion)	-	2000	-
5.4 i)(Aldrin)	-	2000	-
5.4 i)(Dieldrin)	-	2000	-
Cl-5.4 (ii)(Total pesticide residue)	-	4000	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	300	-
Cl-5.2.2(Coliform)	-	300	-
Cl-5.2.3(Staphylococcus aureus)	-	300	-
Cl-5.2.3(Faecal streptococci)	-	400	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	400	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	400	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	250	-
Cl-5.2.7(Yeast and mould)	-	300	-
Cl-5.2.8(Salmonella)	-	400	-
Cl-5.2.8(shigella)	-	400	-
Cl-5.2.9(Vibrio cholera)	-	400	-
Cl-5.2.9(V.parahaemolyticus)	-	400	-
5.3/Table 2/xiii(Suphate)	-	300	-
5.4/Annex D/i(P,P-DDT)	-	2000	-
5.4/Annex D/ii(Lindane)	-	2000	-
5.4/Annex D/iv(b-Endosulfan)	-	2000	-
5.4/Annex D/xvi(Dieldrin)	-	2000	-
5.4/Annex D/xvi(Aldrin)	-	2000	-
5.4/Annex D/i(O,P-DDT)	-	2000	-
5.4/Annex D/iv(a-Endosulfan)	-	2000	-
5.4/Annex D/iii(d-HCH)	-	2000	-
5.4/Annex D/i(O,P-DDD)	-	2000	-
5.4/Annex D/i(P,P-DDE)	-	2000	-
5.4/Annex D/i(O,P-DDE)	-	2000	-
5.4/Annex D/iii(a-HCH)	-	2000	-
5.4/Annex D/iv(Endosulfan sulfate)	-	2000	-
5.4/Annex D/i(P,P-DDD)	-	2000	-
5.4/Annex D/xii(Alachlor)	-	2000	-
5.4/Annex D/vii(Chlorpyrifos)	-	2000	-
5.4/Annex D/x(Butachlor)	-	2000	-
5.4/Annex D/vi(Ethion)	-	2000	-
5.4/Annex D/xiv(Methyl parathion)	-	2000	-
5.4/Annex D/xv(Malathion)	-	2000	-
5.4/Annex D/viii(Phorate)	-	2000	-
5.4/Annex D/v(Monochrotophos)	-	2000	-
5.4/Annex D/xiii(Atrazine)	-	2000	-
5.4/Annex D/viii(Phorate sulphoxide)	-	2000	-
5.4/Annex D/viii(Phorate sulfone)	-	2000	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	2000	-
5.4/Annex D/xxviii(Malaoxon)	-	2000	-
5.4/Annex D/xi(Isoproturon)	-	2000	-
5.4/Annex D/ix(2,4 –D)	-	2000	-
Cl-5.1(General Requirements)	-	100	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	2000	-
Table 3, x)(Uranium)	-	500	-
5.4 i)(beta-HCH)	-	2000	-
5.3(Appearance)	-	100	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	250	-
Cl-5.3, Table-1 (ii)(Odour)	-	200	-
Cl-5.3, Table-1 (iii)(Taste)	-	300	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	400	-
Cl-5.3, Table-1 (vi)(pH)	-	150	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	450	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	250	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	250	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	250	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	250	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	300	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	300	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	300	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	300	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	300	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	300	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	500	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	500	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	300	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	350	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	350	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	350	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	400	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	350	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	350	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	350	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
Cl-5.3, Table-3 (x)(Uranium)	-	500	-
5.4 i)(p,p DDD)	-	2000	-
5.4 i)(o,p DDD)	-	2000	-
5.4 i)(p,p DDE)	-	2000	-
5.4, i)(o,p DDE)	-	2000	-
5.4 i)(p,p DDT)	-	2000	-
5.4 i)(o,p DDT)	-	2000	-
5.4 i)(alpha-HCH)	-	2000	-
5.4/Annex D/iii(β- HCH)	-	2000	-
5.4 i)(Delta-HCH)	-	2000	-
5.4 i)(Gamma-HCH (Lindane))	-	2000	-
5.4 i)(alpha-Endosulfan)	-	2000	-
5.4 i)(beta-Endosulfan)	-	2000	-
5.4 i)(Endosulfan Sulphate)	-	2000	-
5.4 i)(Monocrotophos)	-	2000	-
5.4 i)(Ethion)	-	2000	-
5.4 i)(Chlorpyrifos)	-	2000	-
5.4 i)(Phorate)	-	2000	-
5.4 i)(Phorate sulphoxide)	-	2000	-
5.4 i)(Phorate sulphone)	-	2000	-
5.4 i)(2,4-D)	-	2000	-
5.4 i)(Butachlor)	-	2000	-
5.4 i)(Isoproturon)	-	2000	-
5.4 i)(Alachlor)	-	2000	-
5.4 i)(Atrazine)	-	2000	-
5.4 i)(Methyl Parathion)	-	2000	-
5.4 i)(Methyl Paraoxon)	-	2000	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	2000	-
5.4 i)(Malathion)	-	2000	-
5.4 i)(Aldrin)	-	2000	-
5.4 i)(Dieldrin)	-	2000	-
Cl-5.4 (ii)(Total pesticide residue)	-	4000	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	300	-
Cl-5.2.2(Coliform)	-	300	-
Cl-5.2.3(Staphylococcus aureus)	-	400	-
Cl-5.2.3(Faecal streptococci)	-	300	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	400	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	400	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	250	-
Cl-5.2.7(Yeast and mould)	-	300	-
Cl-5.2.8(Salmonella)	-	400	-
Cl-5.2.8(shigella)	-	400	-
Cl-5.2.9(Vibrio cholera)	-	400	-
Cl-5.2.9(V.parahaemolyticus)	-	400	-
5.3/Table 2/xiii(Suphate)	-	300	-
5.4/Annex D/i(P,P-DDT)	-	2000	-
5.4/Annex D/ii(Lindane)	-	2000	-
5.4/Annex D/iv(b-Endosulfan)	-	2000	-
5.4/Annex D/xvi(Dieldrin)	-	2000	-
5.4/Annex D/xvi(Aldrin)	-	2000	-
5.4/Annex D/i(O,P-DDT)	-	2000	-
5.4/Annex D/iv(a-Endosulfan)	-	2000	-
5.4/Annex D/iii(d-HCH)	-	2000	-
5.4/Annex D/i(O,P-DDD)	-	2000	-
5.4/Annex D/i(P,P-DDE)	-	2000	-
5.4/Annex D/i(O,P-DDE)	-	2000	-
5.4/Annex D/iii(a-HCH)	-	2000	-
5.4/Annex D/iv(Endosulfan sulfate)	-	2000	-
5.4/Annex D/i(P,P-DDD)	-	2000	-
5.4/Annex D/xii(Alachlor)	-	2000	-
5.4/Annex D/vii(Chlorpyrifos)	-	2000	-
5.4/Annex D/x(Butachlor)	-	2000	-
5.4/Annex D/vi(Ethion)	-	2000	-
5.4/Annex D/xiv(Methyl parathion)	-	2000	-
5.4/Annex D/xv(Malathion)	-	2000	-
5.4/Annex D/viii(Phorate)	-	2000	-
5.4/Annex D/v(Monochrotophos)	-	2000	-
5.4/Annex D/xiii(Atrazine)	-	2000	-
5.4/Annex D/viii(Phorate sulphoxide)	-	2000	-
5.4/Annex D/viii(Phorate sulfone)	-	2000	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	2000	-
5.4/Annex D/xxviii(Malaoxon)	-	2000	-
5.4/Annex D/xi(Isoproturon)	-	2000	-
5.4/Annex D/ix(2,4 –D)	-	2000	-
Cl-5.1(General Requirements)	-	100	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	2000	-
Table 3, x)(Uranium)	-	500	-
5.4 i)(beta-HCH)	-	2000	-

01 Jun, 2027

-
Included w.e.f.05.05.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

4090

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

All Grades/Types

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	8000	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	8000	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	8000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	8000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	8000	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	8000	-
7(Dimension - IS 3965)	-	8000	-
11(Marking)	-	8000	-
Table-1, Clause - 5.1(Copper)	-	8000	-
Table-1, Clause - 5.1(Iron)	-	8000	-
Table-1, Clause - 5.1(Magnesium)	-	8000	-
Table-1, Clause - 5.1(Manganese)	-	8000	-
Table-1, Clause - 5.1(Titanium)	-	8000	-
Table-1, Clause - 5.1(Silicon)	-	8000	-
Table-1, Clause - 5.1(Chromium)	-	8000	-
Table-1, Clause - 5.1(Zinc)	-	8000	-

13 May, 2028

-
-

4091

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

13900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.24(Annexure E)(on no account the carbon monoxidel carbon dioxide ratio of the exhaust gases of any burner. operating at any consumption at which the burner is stable at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.)	-	500	-
Cl.23(There shall be no extinction of the flames on any of the burners operating at maximum consumption when the appliance is placed in a general (not localized) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the appliance relative to neighboring walls and the direction of the draught shall be varied to correspond to likely conditions of appliance installation. This applies for all pressures from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).)	-	500	-
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	500	-
4.1(Requirement)	-	500	-
5(Materials)	-	500	-
6(Design for Maintenance)	-	500	-
7(Rigidity and Stability)	-	500	-
8(Workmanship and Finish)	-	500	-
9(Gas Taps)	-	1000	-
10(Injector Jets)	-	1000	-
11(Burners)	-	1000	-
12(Burner Pan Supports)	-	1000	-
13.1(Gas Soundness)	-	500	-
13.2(Gas Leak Detector)	-	500	-
14(Gas Inlet Connections)	-	500	-
15(Strength and Rigidity)	-	500	-
16(General Conditions of Test)	-	500	-
17.1.1(Gas Consumption)	-	1000	-
18(Ignition and Flame Travel)	-	300	-
19(Flame Stability)	-	200	-
20(Noise Control)	-	200	-
21(Flash Back)	-	300	-
22(Formation of Soot)	-	200	-
23(Resistance to Draught)	-	300	-
24(Combustion)	-	500	-
25(Fire Hazard and Limiting Temperature)	-	500	-
26(Thermal Efficiency)	-	1000	-
27.1(Type Tests)	-	100	-
27.2(Routine Tests)	-	200	-
29(Marking)	-	100	-
30(Packing)	-	200	-
5.1.2(Toughened glass- Adhesive tape)	-	1000	-
5.1.3(Thermal Shock test)	-	1000	-

26 Sep, 2027

-
-

4092

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

All Grades/Types

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	15000	-
5.1 table 2(0.2% proof strength)	-	15000	-
5.1 table 2(Tensile strength)	-	15000	-
5.1 table 2(Elongation)	-	15000	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	15000	-
4.1(Freedom from defects)	-	15000	-
9.1(Tensile test)	-	15000	-

13 May, 2028

-
-

4093

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

All Grades/Types

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	20000	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	20000	-
Cl. 4 (b)(Condition - IS 737)	-	20000	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	20000	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	20000	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	20000	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	20000	-
Cl. 4 (g)(Packing Mode - IS 737)	-	20000	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	20000	-
Cl. 6(Freedom from Defects - IS 737)	-	20000	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	20000	-
Cl. 7(Al - IS 504)	-	20000	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	20000	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	20000	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	20000	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	20000	-
Cl. 8.2(Bend Test - IS 1599)	-	20000	-
Cl. 9(Condition - IS 737/ IS 5052)	-	20000	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	20000	-
Cl. 11(Selection of Test Samples - IS 737)	-	20000	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	20000	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	20000	-
Cl. 12(Retests - IS 737/ IS 10259)	-	20000	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	20000	-
Cl. 13.1(Marking - IS 737)	-	20000	-

13 May, 2028

-
-

4094

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

All Grades/Types

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	7500	-
Cl-6.1, Table-1(Fe)	-	7500	-
Cl-6.1, Table-1(Cu)	-	7500	-
Cl-6.1, Table-1(Mn)	-	7500	-
Cl-6.1, Table-1(Mg)	-	7500	-
Cl-6.1, Table-1(Cr)	-	7500	-
Cl-6.1, Table-1(Ni)	-	7500	-
Cl-6.1, Table-1(Zn)	-	7500	-
Cl-6.1, Table-1(Pb)	-	7500	-
Cl-6.1, Table-1(Sn)	-	7500	-
Cl-6.1, Table-1(Ti)	-	7500	-
Cl-6.1, Table-1(Others elements Each)	-	7500	-
Cl-6.1, Table-1(Others elements Total)	-	7500	-
Cl-6.1, Table-1(Aluminium)	-	7500	-
Cl-6.2(The chemical analysis)	-	7500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	7500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	7500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	7500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	7500	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	7500	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	7500	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	7500	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	7500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	7500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	7500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	7500	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	7500	-
Cl-7.2(Tensile Tests)	-	7500	-
Cl-7.3(Test Pieces)	-	7500	-
Cl-7.4(Hardness)	-	7500	-
Cl-8(Freedom from Defects)	-	7500	-
Cl-11(RETEST)	-	7500	-
Cl-13(Marking)	-	0	-
Cl. 6(Silicon)	-	7500	-
Cl. 6(Iron)	-	7500	-
Cl. 6(Copper)	-	7500	-
Cl. 6(Manganese)	-	7500	-
Cl. 6(Magnesium)	-	7500	-
Cl. 6(Chromium)	-	7500	-
Cl. 6(Nickel)	-	7500	-
Cl. 6(Zinc)	-	7500	-
Cl. 6(Lead)	-	7500	-
Cl. 6(Tin)	-	7500	-
Cl. 6(Titanium)	-	7500	-
Cl. 6(Others Element Each)	-	7500	-
Cl. 6(Others Element Total)	-	7500	-
Cl. 6(Aluminium)	-	7500	-
Cl. 6(Silver)	-	7500	-
Cl. 6(Zirconium)	-	7500	-
Cl. 6(Titanium+Zirconium)	-	7500	-
Cl. 6(Antimony)	-	7500	-
Cl. 6(Cobalt)	-	7500	-
Cl. 6(Antimony+Cobalt)	-	7500	-
Cl. 6(Beryllium)	-	7500	-
10(Pressure Test)	-	7500	-

13 May, 2028

-
-

4095

ABB ELSP LAB, Bengaluru

6184126

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

488500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3.3.3.2(Measurement of the temperature of parts)	-	12400	charges per sample
9.3.3.3.3(Temperature-rise of a part)	-	12400	Charges per sample
9.3.3.3.4(Temperature-rise of the main circuit)	-	12400	Charges per sample
9.3.3.3.5(Temperature-rise of control circuits)	-	12400	Charges per sample
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	12400	Charges per sample
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	12400	Charges per sample
9.3.3.2(Operating limits)	-	16800	Charges per sample
9.3.3.2.1.2(Coil power consumption)	-	2500	Charges per sample
9.3.3.2.1.3(Pole impedance)	-	2500	Charges per sample
9.3.3.2.2(Relays and releases)	-	12400	Charges per sample
9.3.6.3(Dielectric tests)	-	12900	Charges per sample
8.2.3(Dielectric properties)	-	12900	Charges per sample
9.3.3.6(Operational performance capability)	-	25000	Charges per sample
9.3.5(Overload current withstand capability of contactors)	-	11500	Charges per sample
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	3000	Charges per sample
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	7600	Charges per sample
8.1.4(Clearances and creepage distances)	-	2500	Charges per sample
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	12400	Charges per sample
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	12400	Charges per sample
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	12400	Charges per sample
8.2.1.5(Limits of operation of current sensing relays and releases)	-	12400	Charges per sample
8.2.2(Temperature-rise)	-	12400	Charges per sample
8.2.4.3.1(Mechanical durability)	-	50000	Charges per sample
8.2.4.3.2(Electrical durability)	-	80000	Charges per sample
8.2.4.4(Overload current withstand capability of contactors)	-	25000	Charges per sample
8.2.4.5(Coil power consumption)	-	2500	Charges per sample
8.2.4.6(Pole impedance)	-	2500	Charges per sample
F.7.2(Tests on products in a new condition)	-	2500	Charges per sample
F.7.3(Test after conventional operational performance)	-	12900	Charges per sample
9.3.3.3.1(Ambient air temperature)	-	12400	Charges per sample
9.3.3.3.2(Measurement of the temperature of parts)	-	12400	Charges per sample
9.3.3.3.3(Temperature-rise of a part)	-	12400	Charges per sample
9.3.3.3.4(Temperature-rise of the main circuit)	-	12400	Charges per sample
9.3.3.3.5(Temperature-rise of control circuits)	-	12400	Charges per sample
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	12400	Charges per sample
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	12400	Charges per sample
9.3.3.2(Operating limits)	-	16800	Charges per sample
9.3.3.2.1.2(Coil power consumption)	-	2500	Charges per sample
9.3.3.2.1.3(Pole impedance)	-	2500	Charges per sample
9.3.3.2.2(Relays and releases)	-	12400	Charges per sample
9.3.6.3(Dielectric tests)	-	12900	Charges per sample
8.2.3(Dielectric properties)	-	12900	Charges per sample
9.3.3.6(Operational performance capability)	-	25000	Charges per sample
9.3.5(Overload current withstand capability of contactors)	-	11500	Charges per sample
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	3000	Charges per sample
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	7600	Charges per sample
8.1.4(Clearances and creepage distances)	-	2500	Charges per sample
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	12400	Charges per sample
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	12400	Charges per sample
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	12400	Charges per sample
8.2.1.5(Limits of operation of current sensing relays and releases)	-	12400	Charges per sample
8.2.2(Temperature-rise)	-	12400	Charges per sample
8.2.4.3.1(Mechanical durability)	-	50000	Charges per sample
8.2.4.3.2(Electrical durability)	-	80000	Charges per sample
8.2.4.4(Overload current withstand capability of contactors)	-	25000	Charges per sample
8.2.4.5(Coil power consumption)	-	2500	Charges per sample
8.2.4.6(Pole impedance)	-	2500	Charges per sample
F.7.2(Tests on products in a new condition)	-	2500	Charges per sample
F.7.3(Test after conventional operational performance)	-	12900	Charges per sample
9.3.3.3.1(Ambient air temperature)	-	12400	Charges per sample

05 Mar, 2028

-
Included w.e.f 07.04.2025 Restricted only for Sequence I, II, IV & V.

4096

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17980 (2022)

Maximum Power Point Tracking Efficiency of Grid Connected Photovoltaic Inverters (First Revision)

upto 80kW

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (a)(Static MPPT efficiency)	-	225000		10% Discount to BIS
Cl-4.1 (b)(Dynamic MPPT efficiency)	-	275000		10% Discount to BIS

17 Feb, 2028

-
Included w.e.f.05.05.2025

4097

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17636 (2021)

Bunk Beds - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	1000	10% discount to BIS
CLAUSE 5(DIMENSIONS)	-	1000	10% discount to BIS
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	10% discount to BIS
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	10% discount to BIS
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	5000	10% discount to BIS
CLAUSE 7.6(Strength of Frame and Fastenings)	-	4000	10% discount to BIS
CLAUSE 7.7(Stability Test)	-	3000	10% discount to BIS
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	3000	10% discount to BIS
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	10% discount to BIS
Cl-6.1 (b)(Pencil hardness)	-	1000	10% discount to BIS
Cl-6.1 (c)(Resistance to wet heat)	-	2000	10% discount to BIS
Cl-6.1 (d)(Resistance to dry heat)	-	2000	10% discount to BIS
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	10% discount to BIS
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	10% discount to BIS
Cl-6.1 (g)(Adhesive performance)	-	2000	10% discount to BIS
Cl-6.2 (a) 1(Breaking load)	-	600	10% discount to BIS
Cl-6.2 (a) 2(Elongation at break)	-	600	10% discount to BIS
Cl-6.2 (a) 3(Tear strength)	-	600	10% discount to BIS
Cl-6.2 (a) 4(Colour fastness to light)	-	1000	10% discount to BIS
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	400	10% discount to BIS
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	650	10% discount to BIS
Cl-6.2 (a) 7(Colour fastness to water)	-	500	10% discount to BIS
Cl-6.2 (a) 8(Pilling resistance)	-	1000	10% discount to BIS
Cl-6.2 (a) 9(Coating adhesion strength)	-	700	10% discount to BIS
Cl-6.2 (a) 10(Seam slippage)	-	800	10% discount to BIS
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	10% discount to BIS
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	10% discount to BIS
Cl-6.2 (a) 13(Bursting strength)	-	700	10% discount to BIS
Cl-6.2 (a) 14(Resistance to cold)	-	500	10% discount to BIS
Cl-6.2 (b) 1(Tear strength)	-	650	10% discount to BIS
Cl-6.2 (b) 2(Flexing endurance)	-	2000	10% discount to BIS
Cl-6.2 (b) 3(Finish adhesion)	-	700	10% discount to BIS
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	10% discount to BIS
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	10% discount to BIS
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	10% discount to BIS
Cl-6.2 (b) 7(Water vapour permeability)	-	700	10% discount to BIS
Cl-6.2 (b) 8(Colour fastness to water)	-	600	10% discount to BIS
Cl-7.1(general test conditions)	-	0	-
Cl-7.2.1(Top Bed Safety Barriers)	-	1000	10% discount to BIS
Cl-7.2.2(Top Bed Safety Barriers)	-	1000	10% discount to BIS
Cl-7.2.3(Top Bed Safety Barriers)	-	1000	10% discount to BIS
Cl-7.2.4(Top Bed Safety Barriers)	-	1000	10% discount to BIS
Cl-7.3.1(Gaps)	-	1000	10% discount to BIS
Cl-7.3.2(Gaps)	-	1000	10% discount to BIS
Cl-7.4.1(Bed Base)	-	1000	10% discount to BIS
Cl-7.4.2(Bed Base)	-	1000	10% discount to BIS
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	1000	10% discount to BIS
Cl-7.5.2(Dimensions of Treads)	-	1000	10% discount to BIS
Cl-7.6(Strength of Frame and Fastenings)	-	0	-
Cl-7.7(Stability)	-	0	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	0	-
Cl-10(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.30.04.2025

4098

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17635 (2022)

Beds - Specification

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	10% Discount to BIS
CLAUSE 5(Dimensions)	-	1000	10% Discount to BIS
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	10% Discount to BIS
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	10% Discount to BIS
CLAUSE 7(SAFETY TESTS)	-	1000	10% Discount to BIS
CLAUSE 7.3(Stability Test)	-	1000	10% Discount to BIS
CLAUSE 7.4(Vertical Static Load Tests)	-	2000	10% Discount to BIS
CLAUSE 7.5(Horizontal Static Load Tests)	-	2000	10% Discount to BIS
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	2000	10% Discount to BIS
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	5000	10% Discount to BIS
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	5000	10% Discount to BIS
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	5000	10% Discount to BIS
CLAUSE 7.7(Vertical Impact Test)	-	2000	10% Discount to BIS
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	5000	10% Discount to BIS
CLAUSE 8.2(Extendable Storage Elements)	-	5000	10% Discount to BIS
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	10% Discount to BIS
Cl-6.1 (b)(Pencil hardness)	-	1000	10% Discount to BIS
Cl-6.1 (c)(Resistance to wet heat)	-	2000	10% Discount to BIS
Cl-6.1 (d)(Resistance to dry heat)	-	2000	10% Discount to BIS
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	10% Discount to BIS
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	10% Discount to BIS
Cl-6.1 (g)(Adhesive performance)	-	2000	10% Discount to BIS
Cl-6.2 (a) 1(Breaking load)	-	600	10% Discount to BIS
Cl-6.2 (a) 2(Elongation at break)	-	600	10% Discount to BIS
Cl-6.2 (a) 3(Tear strength)	-	600	10% Discount to BIS
Cl-6.2 (a) 4(Colour fastness to light)	-	1000	10% Discount to BIS
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	400	10% Discount to BIS
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	650	10% Discount to BIS
Cl-6.2 (a) 7(Colour fastness to water)	-	500	10% Discount to BIS
Cl-6.2 (a) 8(Pilling resistance)	-	1000	10% Discount to BIS
Cl-6.2 (a) 9(Coating adhesion strength)	-	700	10% Discount to BIS
Cl-6.2 (a) 10(Seam slippage)	-	800	10% Discount to BIS
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	10% Discount to BIS
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	10% Discount to BIS
Cl-6.2 (a) 13(Bursting strength)	-	700	10% Discount to BIS
Cl-6.2 (a) 14(Resistance to cold)	-	500	10% Discount to BIS
Cl-6.2 (b) 1(Tear strength)	-	650	10% Discount to BIS
Cl-6.2 (b) 2(Flexing endurance)	-	200	10% Discount to BIS
Cl-6.2 (b) 3(Finish adhesion)	-	700	10% Discount to BIS
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	10% Discount to BIS
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	10% Discount to BIS
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	10% Discount to BIS
Cl-6.2 (b) 7(Water vapour permeability)	-	700	10% Discount to BIS
Cl-6.2 (b) 8(Colour fastness to water)	-	600	10% Discount to BIS
Cl-7.1(Safety Tests)	-	1000	10% Discount to BIS
Cl-7.2(Safety Tests)	-	1000	10% Discount to BIS
Cl-7.3(Stability Test)	-	0	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	1000	10% Discount to BIS
Cl-7.4.2(Vertical Static Load on Side Rail)	-	1000	10% Discount to BIS
Cl-7.5.1(Horizontal Static Load on Headboard)	-	2000	10% Discount to BIS
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	0	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	0	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	0	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	0	-
Cl-7.7(Vertical Impact Test)	-	0	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	0	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	0	-
Cl-10(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.30.04.2025

4099

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17634 (2022)

Storage Units - Specification

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1000	10% Discount to BIS
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	10% Discount to BIS
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	10% Discount to BIS
CLAUSE 7.1(SAFETY TESTS (General))	-	0	-
CLAUSE 7.2(Test for Non-Movable Parts)	-	0	-
CLAUSE 7.2.1(Shelves)	-	0	-
CLAUSE 7.2.1.2(Deflection of shelves)	-	2000	10% Discount to BIS
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	2000	10% Discount to BIS
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	2000	10% Discount to BIS
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	2000	10% Discount to BIS
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	2000	10% Discount to BIS
CLAUSE 7.2.4.2(Drop test)	-	2000	10% Discount to BIS
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	2000	10% Discount to BIS
CLAUSE 7.3.1(Pivoted Doors)	-	0	-
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	5000	10% Discount to BIS
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	0	-
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	3000	10% Discount to BIS
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	6000	10% Discount to BIS0
CLAUSE 7.3.3(Flaps)	-	0	10% Discount to BIS
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	2000	10% Discount to BIS
CLAUSE 7.3.3.2(Durability of flaps)	-	4000	10% Discount to BIS
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	2000	10% Discount to BIS
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	0	-
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	3000	10% Discount to BIS
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	5000	10% Discount to BIS
CLAUSE 7.3.5(Extension Element)	-	0	-
CLAUSE 7.3.5.2(Strength of extension elements)	-	2000	10% Discount to BIS
CLAUSE 7.3.5.3(Durability of extension elements)	-	6000	10% Discount to BIS
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	3000	10% Discount to BIS
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	3000	10% Discount to BIS
CLAUSE 7.3.5.6(Interlock test)	-	2000	10% Discount to BIS
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	0	-
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	2000	10% Discount to BIS
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	2000	10% Discount to BIS
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	5000	10% Discount to BIS
CLAUSE 7.3.7(Pull Force Test)	-	1000	10% Discount to BIS
CLAUSE 7.3.7(Pull Force Test)	-	0	-
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	5000	10% Discount to BIS
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	5000	10% Discount to BIS
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	2000	10% Discount to BIS
CLAUSE 7.4.1.3(Sustained load test (overload))	-	2000	10% Discount to BIS
CLAUSE 7.4.1.4(Dislodgement test)	-	2000	10% Discount to BIS
CLAUSE 7.5(Stability Tests)	-	0	-
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	2000	10% Discount to BIS
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	2000	10% Discount to BIS
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	1000	10% Discount to BIS
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	1000	10% Discount to BIS
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	1000	10% Discount to BIS
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	1000	10% Discount to BIS
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	1000	10% Discount to BIS
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	10% Discount to BIS
Cl-6.1 (b)(Pencil hardness)	-	1000	10% Discount to BIS
Cl-6.1 (c)(Resistance to wet heat)	-	2000	10% Discount to BIS
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	2000	10% Discount to BIS
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	10% Discount to BIS
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	2000	10% Discount to BIS
Cl-6.1 (g)(Adhesive performance)	-	2000	10% Discount to BIS
Cl-6.2 (a) 1(Breaking load)	-	600	10% Discount to BIS
Cl-6.2 (a) 2(Elongation at break)	-	600	10% Discount to BIS
Cl-6.2 (a) 3(Tear strength)	-	600	10% Discount to BIS
Cl-6.2 (a) 4(Colour fastness to light)	-	1000	10% Discount to BIS
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	400	10% Discount to BIS
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	650	10% Discount to BIS
Cl-6.2 (a) 7(Colour fastness to water)	-	500	10% Discount to BIS
Cl-6.2 (a) 8(Pilling resistance)	-	1000	10% Discount to BIS
Cl-6.2 (a) 9(Coating adhesion strength)	-	700	10% Discount to BIS
Cl-6.2 (a) 10(Seam slippage)	-	800	10% Discount to BIS
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	10% Discount to BIS
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	10% Discount to BIS
Cl-6.2 (a) 13(Bursting strength)	-	700	10% Discount to BIS
Cl-6.2 (a) 14(Resistance to cold)	-	500	10% Discount to BIS
Cl-6.2 (b) 1(Tear strength)	-	650	10% Discount to BIS
Cl-6.2 (b) 2(Flexing endurance)	-	2000	10% Discount to BIS
Cl-6.2 (b) 3(Finish adhesion)	-	700	10% Discount to BIS
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	10% Discount to BIS
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	10% Discount to BIS
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	10% Discount to BIS
Cl-6.2 (b) 7(Water vapour permeability)	-	700	10% Discount to BIS
Cl-6.2 (b) 8(Colour fastness to water)	-	600	10% Discount to BIS
Cl-7.1(General)	-	0	-
Cl-7.2.1(Shelves)	-	0	10% Discount to BIS
Cl-7.2.2(Tops and Bottoms)	-	0	-
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	0	-
Cl-7.2.4(Strength of the Structure)	-	2000	10% Discount to BIS
Cl-7.3.1(Pivoted Doors)	-	0	-
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	0	-
Cl-7.3.3(Flaps)	-	0	-
Cl-7.3.4(Vertical Roll-Fronts)	-	0	-
Cl-7.3.5(Extension Elements)	-	0	-
Cl-7.3.6(Locking and Latching Mechanism Test)	-	0	-
Cl-7.3.7(Pull Force Test)	-	0	-
Cl-7.3.8(Top Load Ease Cycle Test)	-	0	-
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	0	-
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	0	-
Cl-7.4.1(Units Not Supported by the Floor)	-	0	-
Cl-7.4.2(Units Supported by the Floor)	-	0	-
Cl-7.5.1(General)	-	0	-
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	0	-
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	0	-
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	0	-
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	0	-
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	0	-
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	0	-
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	0	-
Cl-7.5.9(Strength Test for Wall Attachments)	-	0	-
Cl-9(Marking)	-	1000	-

17 Feb, 2028

-
Included w.e.f.30.04.2025

4100

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17633 (2022)

Tables and Desks - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	10% Discount to BIS
ClAUSE 5(Dimensions)	-	1000	10% Discount to BIS
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	12000	10% Discount to BIS
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1000	10% Discount to BIS
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	10% Discount to BIS
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	10% Discount to BIS
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1000	10% Discount to BIS
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	1000	10% Discount to BIS
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	10% Discount to BIS
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	10% Discount to BIS
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.1(Stated load)	-	2000	10% Discount to BIS
Cl-9(Marking)	-	0	-
7.1(General test conditions)	-	0	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	1000	10% Discount to BIS
CLAUSE 7.3.2(Strength under horizontal static force)	-	2000	10% Discount to BIS
CLAUSE 7.4.1(Durability under Vertical Force)	-	5000	10% Discount to BIS
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	5000	10% Discount to BIS
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	8000	10% Discount to BIS
CLAUSE 7.5.2(Durability under Horizontal Force)	-	5000	10% Discount to BIS
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	3000	10% Discount to BIS
CLAUSE 7.6.1(Vertical Impact Test)	-	1000	10% Discount to BIS
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	10% Discount to BIS
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	10% Discount to BIS
CLAUSE 7.7(Deflection of Table Tops)	-	2000	10% Discount to BIS
CLAUSE 7.8(Durability of Tables with Castors)	-	8000	10% Discount to BIS
CLAUSE 7.9(Drop Test)	-	2000	10% Discount to BIS
Cl - 5(Dimensions)	-	0	-
Cl-6 (a)(Resistance to mechanical damage)	-	3000	10% Discount to BIS
Cl-6 (b)(Pencil hardness)	-	1000	10% Discount to BIS
Cl-6 (c)(Resistance to wet heat)	-	2000	10% Discount to BIS
Cl-6 (d)(Resistance to dry heat)	-	2000	10% Discount to BIS
Cl-6 (e)(Resistance to marking by cold liquids)	-	3000	10% Discount to BIS
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	2000	10% Discount to BIS
Cl-6 (g)(Adhesive performance)	-	2000	10% Discount to BIS
Cl-7.2.1(Stability Under Vertical Load)	-	0	-
Cl-7.2.2(Stability with Extension Elements Open)	-	0	-
Cl-7.2.3(Stability Under Horizontal Load)	-	0	-
Cl-7.3.1(Strength under Vertical Static Force)	-	0	-
Cl-7.3.2(Strength under horizontal static force)	-	0	-
Cl-7.4.1(Durability under Vertical Force)	-	0	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	0	-
Cl-7.5.1(General)	-	0	-
Cl-7.5.2(Durability under Horizontal Force)	-	0	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	0	-
Cl-7.6.1(General)	-	0	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	0	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	0	-
Cl-7.7(Deflection of Table Tops)	-	0	-
Cl-7.8(Durability of Tables with Castors)	-	0	-
Cl-7.9(Drop Test)	-	0	-

17 Feb, 2028

-
Included w.e.f.30.04.2025

4101

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1000	10% Discount to BIS
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	10% Discount to BIS
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	10% Discount to BIS
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1000	10% Discount to BIS
CLAUSE 7.2.2(Rearwards Overbalancing)	-	1000	10% Discount to BIS
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1000	10% Discount to BIS
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	0	-
CLAUSE 7.3.1.1(Seat static load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.2(Back static load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.4(Arm downwards static load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.5(Leg forward static load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.6(Leg sideways static load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.7(Diagonal base load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.1.8(Foot rest static-load test)	-	2000	10% Discount to BIS
CLAUSE 7.3.2.1(Seat impact test)	-	2000	10% Discount to BIS
CLAUSE 7.3.2.2(Back impact test)	-	2000	10% Discount to BIS
CLAUSE 7.3.2.3(Arm impact test)	-	2000	10% Discount to BIS
CLAUSE 7.3.2.4(Drop test)	-	2000	10% Discount to BIS
CLAUSE 7.4.1(Seat Fatigue Test)	-	10000	10% Discount to BIS
CLAUSE 7.4.2(Back Fatigue Test)	-	10000	10% Discount to BIS
CLAUSE 7.4.3(Arm Rest Durability Test)	-	8000	10% Discount to BIS
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	10% Discount to BIS
Cl-6.1 (b)(Pencil hardness)	-	1000	10% Discount to BIS
Cl-6.1 (c)(Resistance to wet heat)	-	2000	10% Discount to BIS
Cl-6.1 (d)(Resistance to dry heat)	-	2000	10% Discount to BIS
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	10% Discount to BIS
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	10% Discount to BIS
Cl-6.1 (g)(Adhesive performance)	-	2000	10% Discount to BIS
Cl-6.2 (a) 1(Breaking load)	-	600	10% Discount to BIS
Cl-6.2 (a) 2(Elongation at break)	-	600	10% Discount to BIS
Cl-6.2 (a) 3(Tear strength)	-	600	10% Discount to BIS
Cl-6.2 (a) 4(Colour fastness to light)	-	1000	10% Discount to BIS
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	400	10% Discount to BIS
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	650	10% Discount to BIS
Cl-6.2 (a) 7(Colour fastness to water)	-	500	10% Discount to BIS
Cl-6.2 (a) 8(Pilling resistance)	-	1000	10% Discount to BIS
Cl-6.2 (a) 9(Coating adhesion strength)	-	700	10% Discount to BIS
Cl-6.2 (a) 10(Seam slippage)	-	800	10% Discount to BIS
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	10% Discount to BIS
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	10% Discount to BIS
Cl-6.2 (a) 13(Bursting strength)	-	700	10% Discount to BIS
Cl-6.2 (a) 14(Resistance to cold)	-	500	10% Discount to BIS
Cl-6.2 (b) 1(Tear strength)	-	650	10% Discount to BIS
Cl-6.2 (b) 2(Flexing endurance)	-	2000	10% Discount to BIS
Cl-6.2 (b) 3(Finish adhesion)	-	700	10% Discount to BIS
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	10% Discount to BIS
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	10% Discount to BIS
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	10% Discount to BIS
Cl-6.2 (b) 7(Water vapour permeability)	-	700	10% Discount to BIS
Cl-6.2 (b) 8(Colour fastness to water)	-	600	10% Discount to BIS
Cl - 5(DIMENSIONS)	-	0	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	0	-
Cl-7.2.2(Rearwards Overbalancing)	-	0	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	0	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	1000	10% Discount to BIS
Cl-7.3.1(Static Load Test)	-	0	-
Cl-7.3.2(Impact Test)	-	0	-
Cl-7.4.1(Seat Fatigue Test)	-	0	-
Cl-7.4.2(Back Fatigue Test)	-	0	-
Cl-7.4.3(Arm Rest Durability)	-	0	-
Cl-9(Marking)	-	0	-
7.1(General test conditions)	-	0	-

17 Feb, 2028

-
Included w.e.f.30.04.2025

4102

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17631 (2022)

Work Chairs - Specification

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	1000	10% discount to BIS
clause 5(DIMENSIONS)	-	1000	10% discount to BIS
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	10% discount to BIS
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	600	10% discount to BIS
Cl-7.3.1(Front Edge Overturning)	-	1000	10% discount to BIS
Cl-7.3.2(Forwards Overturning)	-	1000	10% discount to BIS
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	1000	10% discount to BIS
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	1000	10% discount to BIS
Cl-6.1 (b)(Pencil hardness)	-	1000	10% discount to BIS
Cl-6.1 (c)(Resistance to wet heat;)	-	2000	10% discount to BIS
Cl-6.1 (d)(Resistance to dry heat;)	-	2000	10% discount to BIS
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	10% discount to BIS
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	2000	10% discount to BIS
Cl-6.1 (g)(Adhesive performance)	-	2000	10% discount to BIS
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	600	10% discount to BIS
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	600	10% discount to BIS
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	1000	10% discount to BIS
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	400	10% discount to BIS
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	650	10% discount to BIS
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	500	10% discount to BIS
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	10% discount to BIS
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	700	10% discount to BIS
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	800	10% discount to BIS
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	2000	10% discount to BIS
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	10% discount to BIS
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	700	10% discount to BIS
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	500	10% discount to BIS
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	2000	10% discount to BIS
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	650	10% discount to BIS
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	700	10% discount to BIS
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	2000	10% discount to BIS
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1000	10% discount to BIS
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	500	10% discount to BIS
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	700	10% discount to BIS
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	600	10% discount to BIS
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	10% discount to BIS
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	10% discount to BIS
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	10% discount to BIS
Cl-7.4.1(Seat Front Edge Static Load Test)	-	2000	10% discount to BIS
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	2000	10% discount to BIS
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	2000	10% discount to BIS
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	2000	10% discount to BIS
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	10% discount to BIS
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	10% discount to BIS
Cl-7.5.1(Seat and Back Durability)	-	18000	10% discount to BIS
Cl-7.5.2(Arm Rest Durability)	-	8000	10% discount to BIS
Cl-7.5.3(Swivel Test)	-	10000	10% discount to BIS
Cl-7.5.4(Foot-rest Durability)	-	8000	10% discount to BIS
Cl-7.5.5(Castor and Chair-Base Durability)	-	10000	10% discount to BIS

17 Feb, 2028

-
Included w.e.f.30.04.2025

4103

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

All Grades/Types

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	6000	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	6000	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	6000	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	6000	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	6000	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	6000	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	6000	-
6(Freedom From Defects)	-	6000	-
7(Dmension And Tolerances)	-	6000	-
9.2(Head Forming Test)	-	6000	-
11(Marking)	-	6000	-

13 May, 2028

-
-

4104

Universal Testing and Research Centre (Division of Sustainable Stewardship Private Limited)

8169306

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All Grade BWP, CS/CSC/CSFF

20300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.2(Adhesives for Bonding of Veneers)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.2(Thickness)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.3(Squareness)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-8.1, 8.2(Workmanship and finish)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.3(Moisture Content)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.5, 10.5.1(Resistance to Water Test)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.5.2(Water Resistance Test (Alternate method))	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.8(Tensile Strength)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.11(Retention of Preservative)	-	3500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.12(Formaldehyde Content Test)	-	4500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	45000	20% Discount for BIS Samples (Optional Test, Mentioned charges are for the Steady State Formaldehyde Testing 60000/- , Testing Time 30Days)

28 Nov, 2027

-
Included w.e.f. 24.03.2025

4105

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	3000	-
10.2(Accessibility test (MST 11))	-	35000	-
10.3(Cut susceptibility test (MST 12))	-	25000	-
10.4(Ground Continuity Test (MST 13))	-	50000	-
10.5(Impulse voltage test (MST 14))	-	50000	-
10.6(Dielectric withstand test (MST 16))	-	55000	-
10.7(Temperature test (MST 21))	-	70000	-
10.8(Fire test (MST 23))	-	300000	-
10.9(Reverse Current overload test (MST 26))	-	50000	-
10.10(Module breakage test (MST 32))	-	50000	-
11.1(Partial discharge-test (MST 15))	-	45000	-
11.2(Conduit Bending test (MST 33))	-	35000	-
11.3(Terminal box knockout tests (MST 44))	-	32000	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	150000	-
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	75000	-
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	70000	-
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	125000	-
Cl.5, Table 7(UV resistance (MST 54))	-	70000	-
Cl.5, Table 7(Wet leakage current test (MST 17))	-	5000	-
Cl.5, Table 7(Hot spot test (MST 22))	-	15000	-
Cl.5, Table 7(Mechanical load test (MST 34))	-	45000	-

26 Sep, 2027

-
-

4106

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

ALL GRADES/TYPES

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	7000	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Chromium)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Magnesium)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-B)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Chromium)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Magnesium)	-	7000	-
4.2, Table 1of IS:21 (Designation 51000-A)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Magnesium)	-	7000	-
4.2, Table 1of IS:21 (Designation 40800)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	7000	-
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	7000	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 19600)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	7000	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	7000	-
4.1, & 4.1.1(Lead)	-	7000	-
4.1.2(Aluminium)	-	7000	-
5(Marking)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	7000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	7000	-

13 May, 2028

-
-

4107

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

56000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	0	Testing charges included in Cl.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges included in Cl.8.1.1
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges included in Cl.8.1.1
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	4000	-
11.2(General)	-	0	Testing charges included in Cl.11.1
11.3(Heating)	-	0	Testing charges included in Cl.11.1
13.1(General)	-	3000	-
13.2(Leakage current at operating temperature)	-	0	Testing charges included in Cl.13.1
13.3(Electric Strength at operating temperature)	-	0	Testing charges included in Cl.13.1
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	4000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges included in Cl.15
15.2(Spillage Test)	-	0	Testing charges included in Cl.15
15.3(Humidity Test)	-	0	Testing charges included in Cl.15
16.0(General)	-	3000	-
16.1(General)	-	0	Testing charges included in Cl.16
16.2(Leakage Current (after Clause 15))	-	0	Testing charges included in Cl.16
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges included in Cl.16
17(Over Load Protection of Transformers and associated circuits)	-	4000	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	5000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	1500	-
22(Construction verification related test)	-	5000	-
23(General)	-	2000	-
24(Components)	-	3000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	Testing charges included in Cl.16
17(Overload protection of transformers and associated circuits)	-	0	Testing charges included in Cl.17
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	Testing charges included in Cl.8.1.1
11.4(Heating appliances)	-	0	Testing charges included in Cl.11.1
11.5(Motor-operated appliances)	-	0	Testing charges included in Cl.11.1
11.6(Combined appliances)	-	0	Testing charges included in Cl.11.1
11.7(Duration corresponding)	-	0	Testing charges included in Cl.11.1
11.8(Temperature rise)	-	0	Testing charges included in Cl.11.1
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7 "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

4108

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16393 (2015)

Geosynthetics - Geotextiles used in subsurface drainage application - Specification

73440 View breakup
Revised testing charges have been approved w.e.f 18.03.2025

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1(Roll length- IS 1954)	-	300	-
1(Roll width- IS 1954)	-	300	-
1(Grab strength- IS 16342)	-	900	-
1(Sewn seam strength- IS 15060)	-	1650	-
1(Trapezidal tear strength- IS 14293)	-	900	-
1(CBR puncture strength- IS 16078)	-	1350	-
1(Burst strength- IS 1966 (part-2))	-	800	-
1(Permitttivity- IS 14324)	-	1100	-
1(Apparent opening size (AOS)- IS 14294)	-	750	-
1("Ultraviolet stability at 500h, Retained strength- IS 13162 (part-2)")	-	48300	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Type of geotextile)	-	200	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Roll length)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Roll width)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Grab strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Sewn seam strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Trapezidal tear strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(CBR puncture strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Burst strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Permitttivity, sec-1)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Apparent opening size (AOS), mm)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Ultraviolet stability at 500 h, retained strength, percent of original strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Type of geotextile)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Roll length)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Roll width)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Grab strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Sewn seam strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Trapezidal tear strength IS 14293)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(CBR puncture strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Burst strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Permitttivity, sec-1)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Apparent opening size (AOS), mm)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Ultraviolet stability at 500 h, retained strength, percent of original strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Type of geotextile)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Roll length)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Roll width)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Grab strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Sewn seam strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Trapezidal tear strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Trapezidal tear strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(CBR puncture strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Burst strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Permitttivity, sec-1)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Apparent opening size (AOS), mm)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation <50%(Ultraviolet stability at 500 h, retained strength, percent of original strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Type of geotextile)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Roll length)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Roll width)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Grab strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Sewn seam strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Trapezidal tear strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(CBR puncture strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Burst strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Permitttivity, sec-1)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation ≥50%(Apparent opening size (AOS), mm)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Type of geotextile)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Roll length)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Roll width)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Grab strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Sewn seam strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Trapezidal tear strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(CBR puncture strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Burst strength)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Permitttivity, sec-1)	-	0	-
Table 1, Clauses 4.3 and 5.4, Class II, Elongation ≥50%(Apparent opening size (AOS), mm)	-	0	-
4.2(Polyster)	-	0	-
4.3(Roll length)	-	0	-
4.3, table 1, A(ii)(Roll length,m,min)	-	0	-
4.3, table 1, A(ii)(Roll length,m,min)	-	0	-
4.3, table 1,A(iii)(Roll width,m,mim)	-	0	-
4.3, table 1,A (iv)(Grab strength,N,Min)	-	0	-
4.3, table 1,A (v)(Sewn seam strength,N,Min)	-	0	-
4.3, table 1,A(vi)(Trapezidal tear strength,N,min)	-	0	-
4.3, table 1,A (vii)(CBR puncture strength,N,Min)	-	0	-
4.3, table 1,A (viii)(Burst strength, kPa, Min)	-	0	-
4.3, table 1,B (ii)(Permitttivity, sec-1, Min)	-	0	-
4.3, table 1,B (iii)(Apparent opening size (AOS), mm, Max)	-	0	-
4.3, table 1,C (iv)(Ultraviolet stability)	-	0	-
5.3(Testing of samples)	-	0	-
4.2(carbon black content and dispersion)	-	550	-
4.2(isophthalic acid content)	-	3900	-
4.2(type of polymer)	-	500	-
4.1(Geotextiles used in subsurface drainage)	-	11940	Chemical Resistance
1(Roll length- IS 1954)	-	0	-
1(Roll width- IS 1954)	-	0	-
1(Grab strength- IS 16342)	-	0	-
1(Sewn seam strength- IS 15060)	-	0	-
1(Trapezidal tear strength- IS 14293)	-	0	-
1(CBR puncture strength- IS 16078)	-	0	-
1(Burst strength- IS 1966 (part-2))	-	0	-
1(Permitttivity- IS 14324)	-	0	-
1(Apparent opening size (AOS)- IS 14294)	-	0	-
1("Ultraviolet stability at 500h, Retained strength- IS 13162 (part-2)")	-	0	-
Table 1, Clauses 4.3 and 5.4, Class I, Elongation <50%(Type of geotextile)	-	0	-
4.2(carbon black content and dispersion)	-	0	-
4.2(isophthalic acid content)	-	0	-
4.2(type of polymer)	-	0	-
4.1(Geotextiles used in subsurface drainage)	-	0	-

-
Exclusion: Cl 4.3, table 1 (Resistance to installation damage), Cl 4.2 (carbon black content and dispersion)

4109

Stellar Test House, Noida

8171606

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

160000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	200	-
5,Table 1(Requirements)	-	0	-
5,Table 1(Length )	-	500	-
5,Table 1(Width )	-	500	-
5,Table 1(Thickness)	-	500	-
5,Table 1(Specific Gravity)	-	1500	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1500	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	1000	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1500	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	1000	-
5,Table 1(Tear resistance (machine direction))	-	2500	-
5,Table 1(Tear resistance (Cross direction))	-	2500	-
5,Table 1(Low temperature crack resistance)	-	5000	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	8000	-
5,Table 1(Seam strength,kg,Min)	-	3500	-
5,Table 1(Volatile Loss ,% ,Max)	-	2500	-
5,Table 1(Peel strength,kN/m,Min)	-	5000	-
5,Table 1(Resistance to soil burial)	-	7000	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	1500	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	1000	-
5,Table 1(Tensile strength (Transverse),% change)	-	1500	-
5,Table 1(Elongation at break (Transverse),% change)	-	1000	-
5,Table 1(Water extraction,% loss in weight)	-	4500	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	15000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	15000	-
6.0(Dimensions and tolerances)	-	1000	-
5, Table-2(Length)	-	500	-
5, Table-2(Width)	-	500	-
5, Table-2(Thickness at 20kPa pressure)	-	500	-
5, Table-2(Tensile Strength (Longitudinal))	-	1500	-
5, Table-2(Tensile Strength (Transverse))	-	1500	-
5, Table-2(Elongation at break (Longitudinal))	-	1000	-
5, Table-2(Elongation at break (Transverse))	-	1000	-
5, Table-2(Tear Strength (Machine direction))	-	2500	-
5, Table-2(Tear Strength (Cross direction))	-	2500	-
5, Table-2(Behaviour during perforation)	-	4000	-
5, Table-2(Height of fall without perforation)	-	2000	-
5, Table-2(Cold crack resistance at low temperature)	-	5000	-
5, Table-2(Hydrostatic Pressure Resistance)	-	7000	-
5, Table-2(Dimensional Stability at 80 degree C)	-	15000	-
5, Table-2(Change in length after heating)	-	4000	-
5, Table-2(Change in width after heating)	-	4000	-
5, Table-2(Resistance to acid and alkali)	-	6000	-
5, Table-2(Strength of welded seam shear resistance)	-	3500	-
5, Table-2(Resistance to static puncturing)	-	2500	-
5, Table-2(Horizontal rate of burning)	-	40000	-
5, Table-2(Vertical rate of burning)	-	40000	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	-
5,Table 2(Specific Gravity)	-	0	-
5,Table 1(Index puncture resistance,N)	-	3500	-

26 Sep, 2028

-
Included w.e.f 19.05.2025

4110

Universal Testing and Research Centre (Division of Sustainable Stewardship Private Limited)

8169306

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All Grade

20300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-4.2(Adhesive)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.1(Veneers)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.2.1(Glueing)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl -5.2.2(Thickness of Veneers)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.1(Joint in Veneers)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.2(Edge joints)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.3(End joints)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.4(Scarf joints)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.4(Grain Direction)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.3(Treatment)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.4(Moisture Content)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1(Dimensions (length))	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.2(Thickness)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.3(Squareness)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.3(Moisture Content)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.5.2(Water Resistance Test)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.6(Tensile Strength-Along the grain)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.7(Mycological Test -Adhesion)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.10(Retention of Preservative)	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.11(Formaldehyde Content Test)	-	3700	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	45000	20% Discount for BIS Samples (Optional Test, Mentioned charges are for the Steady State Formaldehyde Testing 60000/- , Testing Time 30Days)
Cl-9.4.2(Adhesion of Plies)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1.1(Defects in veneers)	-	100	10% Discount to BIS & for others 1.5 times of mentioned testing charges.

28 Nov, 2027

-
Included w.e.f. 24.03.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number