BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14051 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4141

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

All Grade.Types

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	10000	-
8.2, Table 3(Proof Stress, N/mm2)	-	10000	-
8.2, Table 3(Tensile Strength, N/mm2)	-	10000	-
8.2, Table 3(Elongation, %)	-	10000	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	10000	-
8.4(Bend Test)	-	10000	-
8.5(Erichsen Cupping Test)	-	10000	-
10.1(Thickness, mm)	-	10000	-
10.2(width, mm)	-	10000	-
10.3(Length, mm)	-	10000	-
10.4(Flatness,mm)	-	10000	-
10.5(Camber, mm)	-	10000	-
11(Surface Finish)	-	10000	-
Cl . 6 .0(Freedom from defect)	-	10000	-
13(Marking)	-	10000	-

13 May, 2028

-
-

4142

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17296 (2020)

Stainless Steel Door Stoppers ” Specification

Stainless Steel Door Stoppers

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3,a(Single rod door stoppers)	-	1000	-
Clause 3,b(Double rod door stoppers)	-	2000	-
Clause 3,c(Long square rod door stoppers)	-	2000	-
Clause 4.1.1(Base Plate)	-	7500	-
Clause 4.1.2(Rod)	-	7500	-
Clause 4.1.3(Rubber)	-	2000	-
Clause 5(Sizes)	-	2000	-
Clause 7(Finish)	-	1000	-
Clause 8(Sampling and criteria for conformity)	-	0	-
Clause 9(Marking)	-	1000	-
Clause 10(Packing)	-	1000	-
Clause 3,a(Single rod door stoppers)	-	0	-
Clause 3,b(Double rod door stoppers)	-	0	-
Clause 3,c(Long square rod door stoppers)	-	0	-
Clause 4.1.1(Base Plate)	-	0	-
Clause 4.1.2(Rod)	-	0	-
Clause 4.1.3(Rubber)	-	0	-
Clause 5(Sizes)	-	0	-
Clause 7(Finish)	-	0	-
Clause 8(Sampling and criteria for conformity)	-	0	-
Clause 9(Marking)	-	0	-
Clause 10(Packing)	-	0	-

26 Jul, 2027

-
Included w.e.f.19.05.2025

4143

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(COLOUR)	-	250	NA
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	250	NA
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	250	NA
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	250	NA
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	250	NA
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	500	NA
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	250	NA
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	250	NA
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	250	NA
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	250	NA
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	250	NA
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	250	NA
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	250	NA
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	250	NA
7.3.1(No.of Ribs)	-	250	NA
7.3.2(Rib height)	-	250	NA
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	400	NA
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500	NA
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	500	NA
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	500	NA
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	250	NA
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	250	NA
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	NA
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	NA
8.4(Sealing rings - Hardness)	-	500	NA
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500	NA
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500	NA
9.1(Visual Appearance)	-	250	NA
9.2(Internal Diameter)	-	500	NA
9.3(Density IS 12235 (Part 14))	-	750	NA
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	2000	NA
9.5(Tensile Strength IS 12235(Part 13))	-	2500	NA
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	5000	OK
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	5000	-

18 Dec, 2027

-
-

4144

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1,Table 1(Wall thickness)	-	1000	ok
7.2 ,Table 2&3(Socket Dimensions)	-	7000	ok
7.3(Dimensions of waste trap(Nahani Trap)	-	7000	ok
10(Workmanship)	-	500	ok
11.4,Table 5(Vent cowl)	-	7000	ok
11.5,Table 6(Pipe Clips)	-	7000	ok
12.1(Visual appearance)	-	500	ok
12.2(Stress relief test)	-	5000	ok
12.3(Vicat softening tempewrature)	-	2000	ok
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2000	ok
Cl.14, Annex A(Titanium Di-Oxide Content)	-	2000	ok
Cl.15, Annex B(Sulphated Ash Content)	-	2000	ok
16.1(Impact test)	-	5000	ok
17(Watet tightness of joint)	-	1000	ok
12.4(Effect on water test)	-	5000	ok

18 Dec, 2027

-
-

4145

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17573 (2021)

BWP GRADE BAMBOO MAT BOARD SPECIFICATION

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Bamboo)	-	1000	-
4.2(Adhesive)	-	2000	-
5.1(Bamboo Mats)	-	1000	-
5.1.1(Prophylactic Treatment)	-	1500	-
5.2(Application of Adhesive)	-	0	-
5.3(Conditioning of Adhesive Coated Bamboo Mats)	-	1000	-
5.4(Assembly)	-	0	-
5.5(Hot Pressing)	-	1000	-
5.6(Preservative Treatment)	-	1500	-
5.7(Moisture Content)	-	1000	-
6.2(Thickness)	-	300	-
6.3 Table - 1 (i)(Length)	-	300	-
6.3 Table - 1 (ii)(Width)	-	300	-
6.3 Table - 1 (iii)(Thickness)	-	300	-
6.3 Table - 1 (iv)(Edge straightness)	-	300	-
6.3 Table - 1 (v)(Squareness)	-	300	-
7(Workmanship and Finish)	-	1000	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	1000	-
8.1 Table - 2 (ii)(Moisture content, percent)	-	1000	-
8.1 Table - 2 (iii)(Internal bond strength in dry state, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (iv)(Internal bond strength in wet state, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (v)(Modulus of rupture, N/mm2 , Min)	-	500	-
8.1 Table - 2 (vi)(Modulus of elasticity, N/mm2 , Min)	-	500	-
8.1 Table - 2 (vii)(Tensile strength, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (viii)(Compressive strength, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	1000	-
8.1 Table - 2 (x) (a)(Flammability)	-	1000	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	1000	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	1500	-
8.2(Flammability, Flame Penetration and Rate of Burning)	-	1500	-
11(Marking)	-	1000	-
6.1(Dimensions)	-	0	-

26 Jul, 2027

-
Included w.e.f.19.05.2025

4146

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

All sizes

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Chemical Composition)	-	7500	-
8(Mechanical and Physical Properties)	-	7500	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9.5(Workmanship)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
7.0(MICRO ALLOYS)	-	0	-
7.0(ALUMINIUM)	-	0	-
7.0(NITROGEN)	-	0	-
7.0(SILICON)	-	0	-
7.0(MANGANESE)	-	0	-
7.0(PHOSPHORUS)	-	0	-
7.0(SULPHUR)	-	0	-
7.0(CARBON)	-	0	-
Cl. 11(Out of square)	-	0	-
Cl. 11(Flatness)	-	0	-
Cl. 11(Camber)	-	0	-
Cl. 11(Width)	-	0	-
Cl. 11(Thickness)	-	0	-
Cl. 8.7(Bake Hardening Index)	-	0	-
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	0	-
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	0	-
Cl. 8.4(Bend Test)	-	0	-
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	0	-
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	0	-
Cl. 9 Table 8(Surface roughness)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Thickness (08))	-	0	-
Cl 7(UTM)	-	0	-
8.1(Mechanical)	-	0	-
8.2(Cupping test)	-	0	-
8.3(Hardness HRB/HV)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Plastic strain ratio)	-	0	-
8.6(Tensile strain Hardening component)	-	0	-
8.7(Black Hardening Index)	-	0	-
10(Freedom from defects)	-	0	-
Cl. 7.3(Carbon)	-	0	-
Cl. 7.3(Manganese)	-	0	-
Cl. 7.3(Suphur)	-	0	-
Cl. 7.3(Phosphorus)	-	0	-
Cl. 7.3(Silicon)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
9(Surface finish)	-	0	-
7(Chemical Composition)	-	0	-
8(Mechanical and Physical Properties)	-	0	-
Cl. 11(Out of square)	-	0	-
Cl. 11(Flatness)	-	0	-
Cl. 11(Camber)	-	0	-
Cl. 11(Width)	-	0	-
Cl. 11(Thickness)	-	0	-
Cl. 8.7(Bake Hardening Index)	-	0	-
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	0	-
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	0	-
Cl. 8.4(Bend Test)	-	0	-
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	0	-
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	0	-
Cl. 9 Table 8(Surface roughness)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Thickness (08))	-	0	-
Cl 7(UTM)	-	0	-
8.1(Mechanical)	-	0	-
8.2(Cupping test)	-	0	-
8.3(Hardness HRB/HV)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Plastic strain ratio)	-	0	-
8.6(Tensile strain Hardening component)	-	0	-
8.7(Black Hardening Index)	-	0	-
10(Freedom from defects)	-	0	-
Cl. 7.3(Carbon)	-	0	-
Cl. 7.3(Manganese)	-	0	-
Cl. 7.3(Suphur)	-	0	-
Cl. 7.3(Phosphorus)	-	0	-
Cl. 7.3(Silicon)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
9(Surface finish)	-	0	-

19 Nov, 2027

-
Included w.e.f 11.07.2025

4147

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 9567 (2001)

Tin or tin - Lead coated copper wire - Specificaiton (First Revision)

Tin or Tin-lead Coated Copper Wire

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Resistivity)	-	5000	-
4.4(Diameter of Coated Wire)	-	500	-
5(Packing and Marking)	-	250	-
6.3.1(Resistance Test)	-	5000	-
6.4.1(Measurement of Diameter)	-	250	-
6.4.2(Elongation and Breaking Strength Test)	-	7500	-
6.4.3(Bend Test)	-	1500	-

19 Mar, 2026

-
Included w.e.f 28.04.2025 Excluding chemical tests

4148

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

All Grade & Types

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
6(Freedom From Defects)	-	10000	-
9.3(Tensile Test-1608:Part 1)	-	10000	-
9.3, Table 3 (Yield Strength, Mpa)	-	10000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	10000	-
9.3, Table 3 (Elongation, %)	-	10000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
14.1(Thickness,mm)	-	10000	-
14.2( Width, mm)	-	10000	-
14.3(Length, mm)	-	10000	-
14.4(Flatness, mm)	-	10000	-
14.5(Camber, mm)	-	10000	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	10000	-
17(Marking)	-	10000	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	10000	-
4.1(General requirements)	-	10000	-
6(Freedom from defects)	-	10000	-
7(Heat treatment)	-	10000	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	10000	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	10000	-
9.1(Sample plan)	-	10000	-
9.2(Tensile test)	-	10000	-
9.3(Mechanical properties)	-	10000	-
9.4(Erichsen cupping test)	-	10000	-
10(Retests)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
13(Edge condition)	-	10000	-
14.1(Thickness)	-	10000	-
14.2.1(Mill Edge)	-	10000	-
14.2.2(Trimmed Edge)	-	10000	-
14.3(Length)	-	10000	-
14.4(Flatness)	-	10000	-
14.5(Camber)	-	10000	-
15(Inspection)	-	10000	-
17(Marking)	-	10000	-

13 May, 2028

-
-

4149

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	2000	-
8.2(Physical requirments-Dimensions-Length)	-	2000	-
8.2(Physical requirments-Dimensions-Height)	-	2000	-
8.2(Physical requirments-Dimensions-Width)	-	2000	-
8.3(Physical requirments- Block density)	-	2000	-
8.4(Physical requirments- Compressive strength)	-	2000	-
8.5(Thermal Conductivity)	-	10000	-
8.6( Drying Shrinkage )	-	2000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	2000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	2000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	2000	-
8.3 & 9.1(Indivisual Moisture Content)	-	2000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	2000	-
3.2 & 8.2(Indivisual Height)	-	2000	-
3.2 & 8.2(Indivisual Width)	-	2000	-
3.2 & 8.2(Indivisual Length)	-	2000	-
8.6, 9.4 & 11.5(Grade)	-	2000	-
3.4(Special Faces)	-	2000	-
3.3(Faces & Arises)	-	2000	-
3.1(Shape)	-	2000	-
8.1.1(General (Exposed wall construction))	-	2000	-
5(MATERIALS)	-	2000	-
7(SURFACE TEXTURE AND FINISH)	-	2000	-
9.3(Thermal Conductivity)	-	10000	-
15(Marking)	-	2000	-

08 May, 2028

-
-

4150

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15658 (2006)

Precast concrete blocks for paving - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	1000	-
6.1.3(Physical requirement)	-	1000	-
6.1.4(Physical requirement)	-	1000	-
6.2.1 & 7.1(VISUAL INSPECTION)	-	1000	-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	1000	-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	1000	-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	1000	-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	1000	-
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	1000	-
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	1000	-
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	1000	-
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	1000	-
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	1000	-
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	1000	-
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	1000	-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	1000	-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	1000	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	1000	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	1000	-
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	1000	-
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	1000	-
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	1000	-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	1000	-
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	1000	-
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	1000	-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	1000	-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1000	-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1000	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	10000	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens))	-	10000	-
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	10000	-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	10000	-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	10000	-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	10000	-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	10000	-
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	10000	-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	10000	-
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	10000	-
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	10000	-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	10000	-
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	10000	-
Annex-G-7(AVERAGE BREAKING LOAD)	-	10000	-
Cl. 6.2.2 Table 2(Overall Length)	-	1000	-
6.2.4, Table 4(Water Absorption)	-	1000	-
6.2.4, Table 4(Water Absorption)	-	1000	-
6.2.4, Table 4(Water Absorption)	-	1000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
10(Marking)	-	1000	-
5(RAW MATERIAL)	-	1000	-
10(MARKING)	-	1000	-

08 May, 2028

-
-

4151

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

PE100, PE80, PE63

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	5000	-
3(Designation)	-	5000	-
4(Colour)	-	5000	-
6(Dimensions of pipes)	-	5000	-
7(Visual Appearance)	-	5000	-
8.1(Hydraulic characteristics)	-	5000	-
8.2(Reversion)	-	5000	-
8.3(Density)	-	5000	-
8.4(Melt Flow Rate)	-	5000	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	5000	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	5000	-
5.1(High Density Polyethylene)	-	5000	-
5.2(Anti Oxident)	-	5000	-

08 May, 2028

-
-

4152

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	1000	-
5.1(Tensile Adhesion Strength )	-	2000	-
5.1(Tensile Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength )	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.3(OpenTime)	-	2000	-
5.4(Adjustment Time)	-	2000	-
5.5(Slip (Required for Vertical Application Only))	-	2000	-
5.6(Deformability (Required for VerticalApplication Only))	-	2000	-
8.2(Marking)	-	1000	-

08 May, 2028

-
-

4153

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.2(a)( Aggregates Impact Value)	-	1000	-
5.4.2(b)( Aggregates Impact Value)	-	1000	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	1000	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	1000	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	1000	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	1000	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	1000	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	1000	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	1000	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	1000	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	1000	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	1000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	1000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	1000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	1000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	1000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	1000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	1000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	1000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	1000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	1000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	1000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	1000	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	1000	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	1000	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	1000	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	1000	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	1000	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	1000	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	1000	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	1000	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	1000	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	1000	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	1000	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	1000	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	1000	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	1000	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	1000	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	1000	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	1000	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	1000	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	1000	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	1000	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	1000	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	1000	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	1000	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	1000	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1000	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	1000	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1000	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	1000	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1000	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1000	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1000	-
7.2(Moisture Content)	-	1000	-
7.2(Bulking Of Fine Aggregate)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1000	-
7.2(Moisture Content)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.3(Elongation Index)	-	1000	-
5.3(Flakiness Index)	-	1000	-
5.6(Alkali Agregate Reaction )	-	1000	-
5.7 table 3(WaterAbsorption)	-	1000	-
5.7 table 3(Specific Gravity)	-	1000	-
5.3(Flakiness & Elongation)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	-
5.7 table 4 (Calcium oxide)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	1000	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1000	-
Clause 5.6(Nature of Aggregate)	-	1000	-
Clause 5.6(Dissolved Silica)	-	1000	-
Clause 5.6(Reduction in Alkalinity)	-	1000	-
Clause 5.1(General)	-	1000	-
Clause 5.1(General)	-	1000	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	1000	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	1000	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	1000	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	1000	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	1000	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	1000	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	1000	-

08 May, 2028

-
-

4154

BIS, Central Laboratory (CL)

None

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Shape and Design)	-
Cl-5.3 (Material)	-
Cl-5.4, Table-1 (i) (Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (ii) (Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (iii) (Whole shoe flexing, flexes)	-
Cl-5.4, Table-1 (iv) (Water proofness on complete shoe)	-
Cl-5.4, Table-1 (v) (Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-
Cl-5.4, Table-1 (vi) (Attachment strength of strap and buckle/D-ring N)	-
Cl-5.4, Table-1 (vii) (Attachment strength of strap and velcro , N, Min)	-
Cl-5.4, Table-1 (viii) (Strength of eyelet attachment, N, Min)	-
Cl-5.4, Table-1 (ix) (Heel pull off strength, N, Min)	-
Cl-5.4, Table-1 (x) (Top piece attachment strength, N, Min)	-
Cl-5.4, Table-1 (xi) (Seam strength, N/mm, Min)	-
Cl-5.4, Table-1 (xii) (Whole shoe topline strength, N, Min)	-
Cl-5.4, Table-1 (xiii) (Abrasion resistance (volume loss), mm3)	-
Cl-6.1.1, Table-2 (i) (Tear trength, N)	-
Cl-6.1.1, Table-2 (ii) (Flexing resistance, flexes)	-
Cl-6.1.1, Table-2 (v) (Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-
Cl-6.3, Table-7 (i) (Flexing index, Min)	-
Cl-6.3, Table-7 (ii) (Abrasion resistance at 400 cycles)	-
Cl-6.3, Table-7 (iii) (Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-
Cl-6.4, Table-8 (i) (Thickness, mm, Min)	-
Cl-6.4, Table-8 (ii) (Abrasion resistance)	-
Cl-6.4, Table-8 (iii) (Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-
CL. 5.4, Table 1, Sl No (xv) ("Lead content (as Pb) ppm, Max (applicable only for PVC")	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011 (pH, Min)	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i) (Allergenic and carcinogenic disperse dyes)	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv) (Chromium (VI))	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v) (Dimethyl fumarate (DMFU))	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii) (Organotin compounds)	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix) (PCP-TeCP-TriCP polychlorophenols)	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x) (pH)	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi) (Phthalates (each individual phthalate))	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii) (Nickel, on skin contact)	-

-
Complete for Chemical ( The material composition of each shoe part must be clearly declared for testing)

4155

BIS, Central Laboratory (CL)

None

IS 303 (1989)

Plywood for General Purposes -

Rs 4000/- /BWR Grade, Rs.4900/- for MR Grade Rs 4000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Dimensions & Tolerances - Edge Straightness - Annexure C)	-

-
-

4156

ADS LABTECH, GHAZIABAD

8178326

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

PULVERIZED FUEL ASH

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	500	OK
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	OK
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	OK
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	OK
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	500	OK
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	OK
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	OK
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	OK
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	500	OK
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1500	OK
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	1500	OK
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	1500	OK
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	1500	OK
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	1500	OK
5.1, 7.1, table-2, iii(Lime reacitivity)	-	1500	OK
5.1&7.1, table-2 (III)(Lime Reactivity)	-	1500	OK
5.1, 7.1, table-2, iii(Lime reacitivity)	-	1500	OK
7.2(Uniformity Requirements)	-	1500	OK

15 May, 2027

-
Included w.e.f.09.04.2025

4157

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

66000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
10(Power input and current)	-	0	Testing charges included in Cl.10
11(Heating)	-	4000	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	4000	-
15.3(Moisture resistance)	-	0	Testing charges included in Cl.15
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	4000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	8000	Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be Rs. 55000 charged extra.
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	0	Testing charges included in Cl.20.1
21(Mechanical strength)	-	3000	-
22(Construction)	-	8000	-
23(Internal wiring)	-	2000	-
24(Components)	-	3000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	3000	-
30.101(Resistance to heat and fire)	-	0	Testing charges included in Cl.30
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
Cl 19.11.4.1(Electrostatic discharges)	-	5000	if applicable
Cl 19.11.4.2(Radiated fields)	-	20000	if applicable
Cl 19.11.4.3(Fast transient bursts)	-	5000	if applicable
Cl 19.11.4.4(Voltage surges)	-	5000	if applicable
Cl 19.11.4.5(Immunity to conducted disturbances)	-	10000	if applicable
Cl 19.11.4.6(Voltage dips and interruptions)	-	5000	if applicable
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	5000	if applicable
Cl 19.11.4.8(Abnormal operation)	-	5000	-
24.101(Components)	-	0	Testing charges included in Cl.24
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-
Cl 19.11.4.1(Electrostatic discharges)	-	0	-
Cl 19.11.4.2(Radiated fields)	-	0	-
Cl 19.11.4.3(Fast transient bursts)	-	0	-
Cl 19.11.4.4(Voltage surges)	-	0	-
Cl 19.11.4.5(Immunity to conducted disturbances)	-	0	-
Cl 19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	0	-
Cl 19.11.4.8(Abnormal operation)	-	0	-
24.101(Components)	-	0	-

20 Jun, 2028

-
Included w.e.f 25.03.2025 Exclusion:Cl 24 (Components), Cl 32 ("Radiation, toxicity and similar hazards")

4158

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17571 (2021)

Flattened Bamboo Board - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Bamboo)	-	2000	-
4.2(Veneer)	-	2000	-
4.3(Adhesive)	-	1000	-
5.1(Flattened Bamboo)	-	1000	-
5.2(Preservative Treatment)	-	1000	-
5.3(Application of Adhesive)	-	1000	-
5.4(Conditioning of Adhesive Coated Flattened Bamboos)	-	500	-
5.5(Assembly)	-	1000	-
5.6(Hot Pressing)	-	1000	-
5.7(Moisture Content)	-	1000	-
6.1(Dimensions)	-	1000	-
6.2(Thickness)	-	1000	-
6.3 Table - 1 (i)(Length)	-	1000	-
6.3 Table - 1 (ii)(Width)	-	1000	-
6.3 Table - 1 (iii)(Thickness)	-	1000	-
6.3 Table - 1 (iv)(Edge straightness)	-	1000	-
6.3 Table - 1 (v)(Squareness)	-	1000	-
7(Workmanship and Finish)	-	1000	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	1000	-
8.1 Table - 2 (ii)(Moisture content)	-	1000	-
8.1 Table - 2 (iii)(Internal bond strength in dry state)	-	1000	-
8.1 Table - 2 (iv)(Internal bond strength in wet state)	-	1000	-
8.1 Table - 2 (v)(Modulus of rupture)	-	1000	-
8.1 Table - 2 (vi)(Modulus of elasticity)	-	2000	-
8.1 Table - 2 (vii)(Tensile strength)	-	1000	-
8.1 Table - 2 (viii)(Compressive strengt)	-	2000	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	1000	-
8.1 Table - 2 (x) (a)(Flammability)	-	2000	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	2000	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	2000	-
11(Marking)	-	1000	-
4.1(Bamboo)	-	0	-
4.2(Veneer)	-	0	-
4.3(Adhesive)	-	0	-
5.1(Flattened Bamboo)	-	0	-
5.2(Preservative Treatment)	-	0	-
5.3(Application of Adhesive)	-	0	-
5.4(Conditioning of Adhesive Coated Flattened Bamboos)	-	0	-
5.5(Assembly)	-	0	-
5.6(Hot Pressing)	-	0	-
5.7(Moisture Content)	-	0	-
6.1(Dimensions)	-	0	-
6.2(Thickness)	-	0	-
6.3 Table - 1 (i)(Length)	-	0	-
6.3 Table - 1 (ii)(Width)	-	0	-
6.3 Table - 1 (iii)(Thickness)	-	0	-
6.3 Table - 1 (iv)(Edge straightness)	-	0	-
6.3 Table - 1 (v)(Squareness)	-	0	-
7(Workmanship and Finish)	-	0	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	0	-
8.1 Table - 2 (ii)(Moisture content)	-	0	-
8.1 Table - 2 (iii)(Internal bond strength in dry state)	-	0	-
8.1 Table - 2 (iv)(Internal bond strength in wet state)	-	0	-
8.1 Table - 2 (v)(Modulus of rupture)	-	0	-
8.1 Table - 2 (vi)(Modulus of elasticity)	-	0	-
8.1 Table - 2 (vii)(Tensile strength)	-	0	-
8.1 Table - 2 (viii)(Compressive strengt)	-	0	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	0	-
8.1 Table - 2 (x) (a)(Flammability)	-	0	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	0	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	0	-
11(Marking)	-	0	-

26 Jul, 2027

-
Included.w.e.f.19.05.2025

4159

Electronic Safety Test Laboratory, EMC Division, SAMEER-Centre for Microwave Research

7192524

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

107000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2900	-
7(Heating under normal operating conditions)	-	9200	-
8(Constructional requirements with regard to the protection against electric shock)	-	15700	-
9(Electric shock hazard under normal operating conditions)	-	8000	-
10(Insulation requirements)	-	7800	Except Cl. 10.3
11(Fault conditions)	-	6400	-
12(Mechanical strength)	-	9500	Except Cl. 12.1.1 and 12.1.3
13(CLEARANCES and CREEPAGE DISTANCES)	-	12400	-
15(TERMINALS)	-	7500	-
16(External flexible cords)	-	6500	-
17(Electrical connections and mechanical fixings)	-	3500	-
19(Stability and mechanical hazards)	-	4000	-
15(Internal wires and power cords)	-	7500	-
16.3b(Cord Bending Test)	-	0	-
4(General test conditions)	-	6000	-
Cl.5.1 of Cl.5(General requirements)	-	2900	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	2900	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	2900	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	2900	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	2900	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	2900	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	2900	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	2900	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	5900	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	2900	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	5900	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	2900	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	2900	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	2900	-
Cl.5.3 of Cl.5(Terminals)	-	2900	-
Cl.5.3a) of Cl.5(Earth terminal)	-	2900	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	5900	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	2900	-
Cl.5.4 of Cl.5(Caution marking)	-	2900	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	2900	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	5900	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	2900	-
Cl.5.5 of Cl.5(Instructions)	-	2900	-
Cl.5.5 of Cl.5(Instructions)	-	2900	-
Cl.5.5 of Cl.5(Instructions)	-	5900	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	2900	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	5900	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	5900	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	2900	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	2900	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	2900	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	2900	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	5900	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	2900	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	2900	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	5900	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	5900	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	2900	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	2900	-
Cl.7.1 of Cl.7(General)	-	6100	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	6100	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	6100	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	6100	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	6100	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	6100	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	6100	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	6100	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	5200	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	7000	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	2900	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	2900	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	3600	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	3600	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	3600	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	3600	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	3600	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	3600	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	3600	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	3600	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	3600	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	3600	-
Cl.8.11 of Cl.8(Detaching of wires)	-	7300	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	7300	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	7300	Depending upon Numbers of test day
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	3000	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	3000	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	3000	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	6300	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	20800	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	8100	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	11800	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	8100	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	11800	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	5000	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	5000	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	5000	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	5000	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	3100	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	5000	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	3000	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	3000	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	3000	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	3000	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	3000	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	5200	-
Cl.10.3 of Cl.10(Humidity treatment)	-	6300	Depending upon Numbers of test day
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	3700	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	3700	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	3700	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	3700	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	3700	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	6800	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	6800	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	6800	-
Cl.11.2 of Cl.11(Heating)	-	6800	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	6800	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	3200	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	7300	Depending upon Numbers of test day
Cl.12.1.4 of Cl.12.1(Impact test)	-	4300	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	4300	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	4300	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	3400	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	2900	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	3000	-
Cl.12.4 of Cl.12(Drawers )	-	3000	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	3200	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	3200	-
Cl.12.5 b) of Cl.12(Impact test,)	-	3200	-
Cl.12.5 c) of Cl.12(Torque test)	-	3200	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	3000	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	3200	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	10700	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	3400	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	4300	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	3000	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	3000	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	4300	-
Cl.13.3 of Cl.13(Clearances)	-	11400	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	8400	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	3500	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	3500	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	3500	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	3700	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	2900	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	2900	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	2900	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	2900	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	2900	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	2900	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	2900	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	2900	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	2900	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	2900	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	2900	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	6800	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	6800	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	6800	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	6800	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	2900	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	6800	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	3100	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	3100	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	3100	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	3100	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	3000	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	3000	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	3000	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	3000	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	3000	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	3100	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	3000	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	3000	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	3300	-
Cl.19.1 of Cl.19(Stability requirements)	-	3300	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	3300	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	3300	-
Cl.19.3 of Cl.19(Vertical force test )	-	3000	-
Cl.19.4 of Cl.19(Horizontal force test)	-	3000	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	3000	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	2900	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	3100	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	3100	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	3100	-
Cl.20.1 of Cl.20(Requirements)	-	6600	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	2900	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	2900	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	3200	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	4400	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	4400	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	4400	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	4200	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	4200	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	4200	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	4200	-
Cl.10.2 of Cl.10(Surge Test)	-	5100	-
Cl.10.2 a) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	5100	-
20(Resistance to fire)	-	4400	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	8300	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	6300	-
8.16(Wound Component)	-	6300	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	8300	-
20.2.4(Printed Boards)	-	8300	-
3(General requirements)	-	0	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	6800	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	The test charges are covered in Clause No. 10

04 Dec, 2028

-
-

4160

Stellar Test House, Noida

8171606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	500	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

26 Sep, 2028

-
Included w.e.f 08.05.2025 Exclusion: Cl-11.6 (Formaldehyde Content Test), Cl-11.7 (Steady-State Formaldehyde Emission Test)

4161

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

All

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	14500	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	14500	-
Cl. 4 (b)(Condition - IS 737)	-	14500	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	14500	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	14500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	14500	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	14500	-
Cl. 4 (g)(Packing Mode - IS 737)	-	14500	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	14500	-
Cl. 6(Freedom from Defects - IS 737)	-	14500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Al - IS 504)	-	14500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	14500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	14500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	14500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	14500	-
Cl. 8.2(Bend Test - IS 1599)	-	14500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	14500	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	14500	-
Cl. 11(Selection of Test Samples - IS 737)	-	14500	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	14500	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	14500	-
Cl. 12(Retests - IS 737/ IS 10259)	-	14500	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	14500	-
Cl. 13.1(Marking - IS 737)	-	14500	-

31 Dec, 2026

-
Included w.e.f 12.03.2025

4162

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 13893 (1994)

Polyurethane soles semirigid - specification

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (Amendment 2)(Thickness)	-	250	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	250	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1200	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1200	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	1500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	600	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	0	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	600	-

02 May, 2027

-
-

4163

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	5200	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5.5 (Amendment 1)(Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	0	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	0	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	0	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	0	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	0	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	0	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	0	-

02 May, 2027

-
-

4164

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	0	-
Cl. No.5("SIZE AND FITTINGS ")	-	0	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	400	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	0	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	0	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	600	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	0	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	0	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	200	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	200	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	400	-
Cl. No.8.4,Table no. 5(i)(Density)	-	0	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1000	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1000	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1000	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	200	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	200	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	0	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	200	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	400	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	200	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	600	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	200	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	200	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2000	Only for physical testing parameters Rs.10000
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	0	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	0	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	0	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	0	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	0	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	0	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	0	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	0	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	0	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	0	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	0	-
Cl-10 (Amendment No-1)(Marking)	-	0	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	0	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	0	-

02 May, 2027

-
-

4165

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 10702 (2023)

Hawai Chappal-Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	0	-
4.2(Length)	-	400	-
4.3(Thickness)	-	400	-
4.4 , Table No. 1 , i)(Density)	-	200	PER PARAMETER
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	600	PER PARAMETER
4.4 , Table No. 1 , iii)(3Split tear strength)	-	400	PER PARAMETER
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	400	PER PARAMETER
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1000	PER PARAMETER
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1000	PER PARAMETER
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	600	PER PARAMETER
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	400	PER PARAMETER
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	200	PER PARAMETER
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	200	FOR PHYSICAL TESTING Rs.6000
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	4000	FOR CHEMICAL TESTING Rs.4000
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	400	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-

02 May, 2027

-
-

4166

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	400	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	200	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	200	-
4.3.6(Energy Absorption at Seat Region)	-	600	-
4.3.7(Complete Shoe Flexing)	-	1000	-
4.3.8(Washability)	-	1000	-
4.3.9(Slip Resistance)	-	2000	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	200	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	200	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	400	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	600	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	200	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	400	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	2000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	400	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	200	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	1000	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	600	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	600	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	400	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	400	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	300	FOR WATER DESORPTION RS.100
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	1000	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	600	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	600	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	400	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	400	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	200	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	200	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	200	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	200	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	200	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	400	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	400	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	400	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	400	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	600	FOR LAC TAG STRENGHT RS.200
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	400	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	400	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	400	FOR PHYSICAL TESTING, RS 23700
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	13000	FOR CHEMICAL testing, Rs. 13000
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	2000	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	1000	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	600	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	400	FOR PHYSICAL TESTING, RS 21700
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	15000	FOR CHEMICAL testing, Rs. 15000
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-

02 May, 2027

-
-

4167

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Leak Proof test)	-	200	-
8.4(Volatility & lead content )	-	500	-
8.3(Compression Resistance)	-	0	-
8.3(Impact resistance )	-	1000	-
8.2(Internal Toe cap length)	-	200	-
8.1(Height of upper )	-	200	-
8.0(Construction)	-	0	-
7.10(Ageing test)	-	800	-
7.9(Hydrolysis)	-	0	-
7.8(Insocks Material )	-	0	-
7.7.5(Upper / Outsole bond strength)	-	0	-
7.7.4(Interlayer Bond Strength )	-	600	-
7.7.3(Flexing Resistance )	-	600	-
7.7.2(Abrasion Resistance)	-	700	-
7.7.1(Tear Strength )	-	600	-
7.7(Hardness (IRHD))	-	500	-
7.7(Thickness)	-	0	-
7.7(Density )	-	0	-
7.6(Peel Strength )	-	600	-
7.6(Shape retention)	-	1000	-
7.6(Moisture )	-	0	-
7.6(Resilience test )	-	0	-
7.6(1st Dry collapsing load, hardness)	-	0	-
7.5(Insocks )	-	800	-
7.5(Insoles )	-	0	-
7.5(Water abrasion & desorption)	-	0	-
7.5(Thickness )	-	0	-
7.4(Tensile Strength )	-	0	-
7.4(Abrasion Resistance)	-	0	-
7.4(Tear Strength )	-	0	-
7.3(Flexing Resistance )	-	500	-
7.3(Tensile Strength )	-	600	-
7.3(Thickness )	-	0	-
7.3(Water Vapour permeability & coefficient )	-	600	-
7.3(Tear Strength )	-	0	-
7.1(Compression Tester)	-	1000	-
7.1(Impact resistance)	-	0	-

02 May, 2027

-
-

4168

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 13995 (1995)

Unlined moulded rubber boots - Specification

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	0	-
5.1.6(Design)	-	0	-
5.1.5(Flexing resistance of upper)	-	600	-
5.1.4(Resistance to dry heat ageing )	-	600	-
5.1.3(Tear Strength)	-	600	-
5.1.2(Tensile Strength (after ageing))	-	600	-
5.1.1(Tensile Strength (before ageing))	-	600	-
4.1(Thickness )	-	0.02	-

02 May, 2027

-
-

4169

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 11544 (1986)

Specification for slipper, rubber

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.6(Thickness of components)	-	0	-
3.2.5(Type of Thread)	-	0	-
3.2.4(Colour fasntess to washing)	-	4800	IT INCLUDES LIGHT FASTNESS,WASHING AND PERSPIRATION
3.2.4(Picks per cm)	-	0	-
3.2.4(End per cm)	-	0	-
3.2.4(Mass per unit area)	-	0	-
3.2(Flexural endurance)	-	600	-
3.2(Hardness after ageing)	-	500	-
3.2(Hardness (IRHD))	-	0	-
3.2(Relative density )	-	400	-
3.1(Shape & Design)	-	0	-

02 May, 2027

-
-

4170

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Stud bolt)	-	0	-
5.4(Stud diameter)	-	0	-
5.4(Tear strength )	-	600	-
5.4(Hardness (shore A)- after ageing)	-	500	-
5.4(Hardness (Shore A))	-	0	-
5.4(Breaking strength )	-	0	-
5.4(Elongation at break )	-	0	-
5.4(Tensile Strength )	-	600	-
5.4(Relative density )	-	400	-
5.4(Shrinkage test (at 100 C temp))	-	0	-
5.4(Shrinkage test (at room temp))	-	0	-
5.4(Split tear strength )	-	600	-
5.4(Compression set)	-	1000	-
5.4(Hardness (Shore A))	-	500	-
5.4(Relative density)	-	0	-
5.3(Thickness )	-	0	-
5.1(Shape & Design)	-	0	-

02 May, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number