BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4171

Interfield Laboratories, Kochi

6124716

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

26875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	344	-
Cl-5.2.2(Coliform)	-	344	-
Cl-5.2.3(Staphylococcus aureus)	-	312.5	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	375	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	312.5	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	437	-
Cl-5.2.7(Yeast and mould)	-	312.5	-
Cl-5.2.8(Salmonella)	-	625	-
Cl-5.2.9(Vibrio cholera)	-	500	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	94	-
Cl-5.3, Table-1 (ii)(Odour)	-	93.5	-
Cl-5.3, Table-1 (iii)(Taste)	-	93.5	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	125	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	125	-
Cl-5.3, Table-1 (vi)(pH)	-	125	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	125	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	375	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	375	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	187.5	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	187.5	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	187.5	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	125	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	375	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	375	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	187.5	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	125	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	375	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	187.5	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	125	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	125	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	125	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	250	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	125	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	187.5	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	1250	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	187.5	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	187.5	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	375	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2250	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	375	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	375	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	375	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	344	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	375	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	375	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	375	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	2500	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	2500	-
Cl-5.3, Table-3 (x)(Uranium)	-	1865	-
Cl-5.4 (ii)(Total pesticide residue)	-	3125	-
Cl-5.2.3(Faecal streptococci)	-	312.5	-
Cl-5.2.8(shigella)	-	562.5	-
Cl-5.2.9(V.parahaemolyticus)	-	562.5	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	437	-
5.4 i)(Dieldrin)	-	104	-
5.4 i)(Aldrin)	-	104	-
5.4 i)(Malathion)	-	104	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	104	-
5.4 i)(Methyl Paraoxon)	-	104	-
5.4 i)(Methyl Parathion)	-	104	-
5.4 i)(Atrazine)	-	104	-
5.4 i)(Alachlor)	-	104	-
5.4 i)(Isoproturon)	-	104	-
5.4 i)(Butachlor)	-	104	-
5.4 i)(2,4-D)	-	109	-
5.4 i)(Phorate sulphone)	-	104	-
5.4 i)(Phorate sulphoxide)	-	104	-
5.4 i)(Phorate)	-	104	-
5.4 i)(Chlorpyrifos)	-	104	-
5.4 i)(Ethion)	-	104	-
5.4 i)(Monocrotophos)	-	104	-
5.4 i)(Endosulfan Sulphate)	-	104	-
5.4 i)(beta-Endosulfan)	-	104	-
5.4 i)(alpha-Endosulfan)	-	104	-
5.4 i)(Delta-HCH)	-	104	-
5.4 i)(beta-HCH)	-	104	-
5.4 i)(alpha-HCH)	-	104	-
5.4 i)(Gamma-HCH (Lindane))	-	104	-
5.4 i)(p,p DDD)	-	104	-
5.4 i)(o,p DDD)	-	104	-
5.4 i)(p,p DDE)	-	104	-
5.4, i)(o,p DDE)	-	104	-
5.4 i)(p,p DDT)	-	104	-
5.4 i)(o,p DDT)	-	104	-
5.3(Appearance)	-	50	-
5.3/Table 2/xiii(Suphate)	-	187.5	-
5.4/Annex D/i(P,P-DDT)	-	104	-
5.4/Annex D/ii(Lindane)	-	104	-
5.4/Annex D/iv(b-Endosulfan)	-	104	-
5.4/Annex D/xvi(Dieldrin)	-	104	-
5.4/Annex D/xvi(Aldrin)	-	104	-
5.4/Annex D/i(O,P-DDT)	-	104	-
5.4/Annex D/iv(a-Endosulfan)	-	104	-
5.4/Annex D/iii(d-HCH)	-	104	-
5.4/Annex D/i(O,P-DDD)	-	104	-
5.4/Annex D/i(P,P-DDE)	-	104	-
5.4/Annex D/i(O,P-DDE)	-	104	-
5.4/Annex D/iii(a-HCH)	-	104	-
5.4/Annex D/iii(β- HCH)	-	104	-
5.4/Annex D/iv(Endosulfan sulfate)	-	104	-
5.4/Annex D/i(P,P-DDD)	-	104	-
5.4/Annex D/xii(Alachlor)	-	104	-
5.4/Annex D/vii(Chlorpyrifos)	-	104	-
5.4/Annex D/x(Butachlor)	-	104	-
5.4/Annex D/vi(Ethion)	-	104	-
5.4/Annex D/xiv(Methyl parathion)	-	104	-
5.4/Annex D/xv(Malathion)	-	104	-
5.4/Annex D/viii(Phorate)	-	104	-
5.4/Annex D/v(Monochrotophos)	-	104	-
5.4/Annex D/xiii(Atrazine)	-	104	-
5.4/Annex D/viii(Phorate sulphoxide)	-	104	-
5.4/Annex D/viii(Phorate sulfone)	-	104	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	104	-
5.4/Annex D/xxviii(Malaoxon)	-	104	-
5.4/Annex D/xi(Isoproturon)	-	104	-
5.4/Annex D/ix(2,4 –D)	-	109	-
Cl-5.1(General Requirements)	-	500	-
Table 3, x)(Uranium)	-	1865	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	3125	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	344	-
Cl-5.2.2(Coliform)	-	344	-
Cl-5.2.3(Staphylococcus aureus)	-	312.5	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	375	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	312.5	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	437	-
Cl-5.2.7(Yeast and mould)	-	312.5	-
Cl-5.2.8(Salmonella)	-	625	-
Cl-5.2.9(Vibrio cholera)	-	500	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	94	-
Cl-5.3, Table-1 (ii)(Odour)	-	93.5	-
Cl-5.3, Table-1 (iii)(Taste)	-	93.5	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	125	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	125	-
Cl-5.3, Table-1 (vi)(pH)	-	125	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	125	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	375	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	375	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	187.5	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	187.5	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	187.5	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	125	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	375	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	375	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	187.5	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	125	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	375	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	187.5	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	125	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	125	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	125	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	250	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	125	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	187.5	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	1250	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	187.5	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	187.5	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	375	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2250	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	375	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	375	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	375	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	344	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	375	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	375	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	375	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	2500	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	2500	-
Cl-5.3, Table-3 (x)(Uranium)	-	1865	-
Cl-5.4 (ii)(Total pesticide residue)	-	3125	-
Cl-5.2.3(Faecal streptococci)	-	312.5	-
Cl-5.2.8(shigella)	-	562.5	-
Cl-5.2.9(V.parahaemolyticus)	-	562.5	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	437	-
5.4 i)(Dieldrin)	-	104	-
5.4 i)(Aldrin)	-	104	-
5.4 i)(Malathion)	-	104	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	104	-
5.4 i)(Methyl Paraoxon)	-	104	-
5.4 i)(Methyl Parathion)	-	104	-
5.4 i)(Atrazine)	-	104	-
5.4 i)(Alachlor)	-	104	-
5.4 i)(Isoproturon)	-	104	-
5.4 i)(Butachlor)	-	104	-
5.4 i)(2,4-D)	-	109	-
5.4 i)(Phorate sulphone)	-	104	-
5.4 i)(Phorate sulphoxide)	-	104	-
5.4 i)(Phorate)	-	104	-
5.4 i)(Chlorpyrifos)	-	104	-
5.4 i)(Ethion)	-	104	-
5.4 i)(Monocrotophos)	-	104	-
5.4 i)(Endosulfan Sulphate)	-	104	-
5.4 i)(beta-Endosulfan)	-	104	-
5.4 i)(alpha-Endosulfan)	-	104	-
5.4 i)(Delta-HCH)	-	104	-
5.4 i)(beta-HCH)	-	104	-
5.4 i)(alpha-HCH)	-	104	-
5.4 i)(Gamma-HCH (Lindane))	-	104	-
5.4 i)(p,p DDD)	-	104	-
5.4 i)(o,p DDD)	-	104	-
5.4 i)(p,p DDE)	-	104	-
5.4, i)(o,p DDE)	-	104	-
5.4 i)(p,p DDT)	-	104	-
5.4 i)(o,p DDT)	-	104	-
5.3(Appearance)	-	104	-
5.3/Table 2/xiii(Suphate)	-	104	-
5.4/Annex D/i(P,P-DDT)	-	104	-
5.4/Annex D/ii(Lindane)	-	104	-
5.4/Annex D/iv(b-Endosulfan)	-	104	-
5.4/Annex D/xvi(Dieldrin)	-	104	-
5.4/Annex D/xvi(Aldrin)	-	104	-
5.4/Annex D/i(O,P-DDT)	-	104	-
5.4/Annex D/iv(a-Endosulfan)	-	104	-
5.4/Annex D/iii(d-HCH)	-	104	-
5.4/Annex D/i(O,P-DDD)	-	104	-
5.4/Annex D/i(P,P-DDE)	-	104	-
5.4/Annex D/i(O,P-DDE)	-	104	-
5.4/Annex D/iii(a-HCH)	-	104	-
5.4/Annex D/iii(β- HCH)	-	104	-
5.4/Annex D/iv(Endosulfan sulfate)	-	104	-
5.4/Annex D/i(P,P-DDD)	-	104	-
5.4/Annex D/xii(Alachlor)	-	104	-
5.4/Annex D/vii(Chlorpyrifos)	-	104	-
5.4/Annex D/x(Butachlor)	-	104	-
5.4/Annex D/vi(Ethion)	-	104	-
5.4/Annex D/xiv(Methyl parathion)	-	104	-
5.4/Annex D/xv(Malathion)	-	104	-
5.4/Annex D/viii(Phorate)	-	104	-
5.4/Annex D/v(Monochrotophos)	-	104	-
5.4/Annex D/xiii(Atrazine)	-	104	-
5.4/Annex D/viii(Phorate sulphoxide)	-	104	-
5.4/Annex D/viii(Phorate sulfone)	-	104	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	104	-
5.4/Annex D/xxviii(Malaoxon)	-	104	-
5.4/Annex D/xi(Isoproturon)	-	104	-
5.4/Annex D/ix(2,4 –D)	-	109	-
Cl-5.1(General Requirements)	-	500	-
Table 3, x)(Uranium)	-	1865	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	3125	-

02 Jul, 2027

-
Included w.e.f.29.07.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

4172

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	500	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	500	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2500	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	500	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	500	-
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	500	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	0	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	0	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	0	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	0	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	0	-
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	0	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	0	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	0	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	0	-
7.2(Uniformity Requirements)	-	500	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	-
5.1&7.1, table-2 (III)(Lime Reactivity)	-	1000	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	6000	-

19 Aug, 2027

-
Included w.e.f 16.07.2025

4173

Stellar Test House, Noida

8171606

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	2000	-
Cl-5.2(Filter Pads)	-	2000	-
Cl-5.3(Sump Tank Capacities)	-	2000	-
Cl-5.4(Blower/Fan)	-	2000	-
Cl-5.4.3(Fan motor)	-	2000	-
Cl-5.5(Pump Set)	-	2000	-
Cl-5.6.1(Electrical wiring and connection)	-	2000	-
Cl-5.6.2(Suitable power cable)	-	2000	-
Cl-5.7(Switches)	-	4000	-
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	4000	-
Cl-8.2(Sound Test)	-	4000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	8000	-
Cl-8.4(Cooling Efficiency Test)	-	8000	-
Cl-8.5(Power Consumption)	-	4000	-
Cl-8.6(EER Calculation Method)	-	4000	-
Cl-8.7(Drop Test)	-	2000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	2000	-
Cl-12.2.2(Protection against Electric Shock)	-	2000	-
Cl-12.2.3(High Voltage Tests)	-	3000	-
Cl-12.2.4(Leakage Current)	-	2000	-
Cl-12.2.5(Provision for Earthing)	-	2000	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	2000	-
Cl-14(Storage)	-	1000	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-

26 Sep, 2028

-
Included w.e.f 28.07.2025

4174

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to rusting)	-	2000	-
30.3(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.2 & 29.3(Clearances, creepage distances )	-	2000	-
29.1 and table 2(creepage and Clearances distances )	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.13(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.7 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.6(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.2 ,24.3,24.5 & 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.5 to 23.8(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.103(Constructions)	-	2000	-
22.13 to 22.33(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.11(ABNORMAL OPERATION)	-	2000	-
19.9(ABNORMAL OPERATION)	-	2000	-
19.7(ABNORMAL OPERATION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
17(Over load Protection )	-	2000	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
15.103(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.4(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15(Moisture resistance)	-	5000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
12,12.1,12.2 & 12.3(Heating)	-	2000	-
11.103(TEMPERATURE RISE)	-	2000	-
11.102(TEMPERATURE RISE)	-	2000	-
11.101(TEMPERATURE RISE)	-	2000	-
11.1(TEMPERATURE RISE)	-	2000	-
11.8(TEMPERATURE RISE)	-	2000	-
11.7(TEMPERATURE RISE)	-	2000	-
11.6(TEMPERATURE RISE)	-	2000	-
11.5(TEMPERATURE RISE)	-	2000	-
11.4(TEMPERATURE RISE)	-	2000	-
11.2(TEMPERATURE RISE)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
10.1,10.2 10.101,10.102( Input and Current)	-	2000	-
9.2(Startability Test)	-	2000	-
9.1(Startability Test)	-	2000	-
9(Starting of motor operated Appliances)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.3(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.2 & 29.3(Clearances, creepage distances )	-	2000	-
29.1 and table 2(creepage and Clearances distances )	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.13(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.7 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.6(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.2 ,24.3,24.5 & 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.5 to 23.8(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.103(Constructions)	-	2000	-
22.13 to 22.33(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.11(ABNORMAL OPERATION)	-	2000	-
19.9(ABNORMAL OPERATION)	-	2000	-
19.7(ABNORMAL OPERATION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
17(Over load Protection )	-	2000	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
15.103(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.4(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15(Moisture resistance)	-	5000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
12,12.1,12.2 & 12.3(Heating)	-	2000	-
11.103(TEMPERATURE RISE)	-	2000	-
11.102(TEMPERATURE RISE)	-	2000	-
11.101(TEMPERATURE RISE)	-	2000	-
11.1(TEMPERATURE RISE)	-	2000	-
11.8(TEMPERATURE RISE)	-	2000	-
11.7(TEMPERATURE RISE)	-	2000	-
11.6(TEMPERATURE RISE)	-	2000	-
11.5(TEMPERATURE RISE)	-	2000	-
11.4(TEMPERATURE RISE)	-	2000	-
11.2(TEMPERATURE RISE)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
10.1,10.2 10.101,10.102( Input and Current)	-	2000	-
9.2(Startability Test)	-	2000	-
9.1(Startability Test)	-	2000	-
9(Starting of motor operated Appliances)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	2000	-
6(Classifications)	-	2000	-
6(Classifications)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

4175

CIPET. MYSURU

6113734

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Size

157725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	300	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	-
7.1.3 (Effective length)	-	0	-
8(Pipe Ends)	-	300	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	500	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	575	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	16650	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1400	-
10.4 IS 12235(Part 19)(Flattening Test)	-	500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1600	-
5 Table 1(Classification of pipes)	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1200	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	1100	-
6.3.3(Density)	-	0	-

31 Dec, 2026

-
Included w.e.f 07.07.2025 Exclusion: Cl 6.2.1 Annex B (Chloride Content of Resin), Cl 6.3 (Compound Properties), Cl 6.3.1 Annex B (Chloride content), Cl 6.3.2 Annex C (Verification of the Malfunction Temperature, Tmal: )

4176

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 7092 : Part 1 (1992)

Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)

All Grade / Type / Size / Designation

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	500	-
5(Workmanship and Finish)	-	1500	-
8(Dimensions)	-	1000	-
7.2(Mechanical properties)	-	2500	-
7.3(Flattening test)	-	2000	-
7.4(Hydrostatic test)	-	2000	-

-
Included w.e.f.28.07.2025

4177

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

235000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	55000	5% Discount for BIS
6(CLASSIFICATION)	-	55000	5% Discount for BIS
7(MARKING AND INSTRUCTIONS)	-	55000	5% Discount for BIS
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	55000	5% Discount for BIS
10(POWER INPUT AND CURRENT)	-	55000	5% Discount for BIS
11(HEATING)	-	55000	5% Discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	55000	5% Discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	55000	5% Discount for BIS
15(MOISTURE RESISTANCE)	-	55000	5% Discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	55000	5% Discount for BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	55000	5% Discount for BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	55000	5% Discount for BIS
18(ENDURANCE)	-	55000	5% Discount for BIS
19(ABNORMAL OPERATION)	-	55000	5% Discount for BIS
19.11.4.1(Electrostatic discharges)	-	180000	-
19.11.4.2(Radiated fields)	-	180000	-
19.11.4.3(Fast transient bursts)	-	180000	-
19.11.4.4(Surge immunity test)	-	180000	-
19.11.4.5(Immunity to conducted discharges)	-	180000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	180000	-
19.11.4.7(Harmonics)	-	180000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	55000	5% Discount for BIS
21(MECHANICAL STRENGTH)	-	55000	5% Discount for BIS
22(CONSTRUCTION)	-	55000	5% Discount for BIS
23(INTERNAL WIRING)	-	55000	5% Discount for BIS
24(COMPONENTS)	-	55000	5% Discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	55000	5% Discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	55000	5% Discount for BIS
27(PROVISION FOR EARTHING)	-	55000	5% Discount for BIS
28(SCREWS AND CONNECTIONS)	-	55000	5% Discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	55000	5% Discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	55000	5% Discount for BIS
31(RESISTANCE TO RUSTING)	-	55000	5% Discount for BIS
19.13(ABNORMAL OPERATION)	-	55000	5% Discount for BIS
19.101(Abnormal Operation)	-	55000	5% Discount for BIS
19.102(Abnormal Operation)	-	55000	5% Discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	55000	5% Discount for BIS
4(GENERAL REQUIREMENT)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING AND INSTRUCTIONS)	-	0	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.101(Abnormal Operation)	-	0	-
19.102(Abnormal Operation)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-

08 May, 2028

-
Included w.e.f.22.07.2025 Exclusion Excluding Components

4178

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17635 (2022)

Beds - Specification

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
CLAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7(SAFETY TESTS)	-	1000	-
CLAUSE 7.3(Stability Test)	-	1000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	2000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	2000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	2000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	5000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	5000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	5000	-
CLAUSE 7.7(Vertical Impact Test)	-	2000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	5000	-
CLAUSE 8.2(Extendable Storage Elements)	-	5000	-
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) 1(Breaking load)	-	600	-
Cl-6.2 (a) 2(Elongation at break)	-	600	-
Cl-6.2 (a) 3(Tear strength)	-	600	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	400	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	650	-
Cl-6.2 (a) 7(Colour fastness to water)	-	500	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	700	-
Cl-6.2 (a) 10(Seam slippage)	-	800	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	700	-
Cl-6.2 (a) 14(Resistance to cold)	-	500	-
Cl-6.2 (b) 1(Tear strength)	-	650	-
Cl-6.2 (b) 2(Flexing endurance)	-	200	-
Cl-6.2 (b) 3(Finish adhesion)	-	700	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	700	-
Cl-6.2 (b) 8(Colour fastness to water)	-	600	-
Cl-7.1(Safety Tests)	-	1000	-
Cl-7.2(Safety Tests)	-	1000	-
Cl-7.3(Stability Test)	-	1000	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	1000	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	1000	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	2000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	0	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	0	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	0	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	0	-
Cl-7.7(Vertical Impact Test)	-	0	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	0	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	0	-
Cl-10(Marking)	-	0	-

-
Included w.e.f.09.07.2025

4179

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
3(GENERAL REQUIREMENTS)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-

19 Jul, 2027

-
Included w.e.f 11.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 Component

4180

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 651 (2007)

Glazed stoneware pipes and fittings - Specification (Sixth Revision)

6850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (GENERAL QUALITY)	-
6 ( GLAZING)	-
7.3 (Absorption Test)	-
10.1-Table 1 (INTERNAL DIAMETER)	-
11.1-Table 1 ( Mean Thickness of Barrel and of Socket)	-
14-Table 1 (Internal Depth of Socket)	-
14-Table 3 (Length of Grooving of Spigot)	-

-
Except Hydraulic Test, Crushing Strength Test & Chemical tests.

4181

IEC TEST LABS LLP

8165726

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	5000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	5000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	5000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	5000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	5000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	3000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	2000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	5000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	30000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	40000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	15000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	15000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
IS 191:2007 & IS 440(Copper purity test)	-	10000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	5000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	10000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	10000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	20000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	10000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	5000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	5000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	10000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	20000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	50000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	5000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	20000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	20000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	10000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	10000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	10000	-
IS 191:2007 & IS 440(Copper purity test)	-	20000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	10000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	10000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	10000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	10000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	10000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	10000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	10000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	10000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	10000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	10000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	10000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	10000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	10000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	10000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	10000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	10000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	10000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	10000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	10000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-

07 Sep, 2026

-
Included w.e.f.18.08.2025

4182

BIS, Guwahati Branch Laboratory (GBL)

None

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
testing charges (rounded to nearest Rs. 50.00) for the product are: Including Transverse Strength (optional test) test ₹ 9,100.00 Excluding Transverse Strength (optional test) test ₹ 7,900.00 Testing charges (rounded to nearest Rs. 50.00) for only chemical test report: 4,300.00 Testing charges (rounded to nearest Rs. 50.00) for only physical test report including optional tests: 4,800.00 Testing charges (rounded to nearest Rs. 50.00) for only physical test report excluding optional tests: 3,600.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-

-
Disabled.

4183

Sleen India Biz venture Private Limited, Agra

9139736

IS 3521 : Part 2 (2021)

Personal Fall Arrest Systems Specification Part 2 Lanyards and Energy Absorbers

43500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.5(Adjustment Slippage)	-	3000	-
4.2.6(Static strength)	-	3000	-
4.2.7(Dynamic strength for adjustable lanyards)	-	3000	-
4.3.4(Inadvertent operation)	-	2000	-
4.3.5(Dynamic performance)	-	3000	-
5.2.4(Corrosion resistance)	-	5000	-
4.2.1(Fibre ropes and webbing)	-	2000	-
4.2.2(Chains)	-	2000	-
4.2.3(Terminations)	-	1000	-
4.2.4(Fittings)	-	3000	-
4.2.5(Adjustment slippage)	-	0	-
4.3.2(Terminations)	-	6000	-
4.3.3(Energy-absorbing lanyards and FBH with energy absorber)	-	3000	-
4.3.6(Static strength)	-	3000	-
4.3.7(Dynamic performance after conditioning)	-	4000	-
6.2(Marking)	-	500	-
4.2.5(Adjustment Slippage)	-	-	-
4.2.6(Static strength)	-	-	-
4.2.7(Dynamic strength for adjustable lanyards)	-	-	-
4.3.4(Inadvertent operation)	-	-	-
4.3.5(Dynamic performance)	-	-	-
5.2.4(Corrosion resistance)	-	-	-
4.2.1(Fibre ropes and webbing)	-	-	-
4.2.2(Chains)	-	-	-
4.2.3(Terminations)	-	-	-
4.2.4(Fittings)	-	-	-
4.2.5(Adjustment slippage)	-	-	-
4.3.2(Terminations)	-	-	-
4.3.3(Energy-absorbing lanyards and FBH with energy absorber)	-	-	-
4.3.6(Static strength)	-	-	-
4.3.7(Dynamic performance after conditioning)	-	-	-
6.2(Marking)	-	-	-

-
Included w.e.f 08.12.2025

4184

BIS, Guwahati Branch Laboratory (GBL)

None

IS 6909 (1990)

Supersulphated cement ? specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-
5.1 (Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-
5.1 (Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2 (Soundness (cold expansion) by Le Chatelier- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Chloride content)	-

-
Disabled.

4185

BIS, Guwahati Branch Laboratory (GBL)

None

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

12900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration - 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 i) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.5 ii) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-

-
Except sulphate expansion and transverse test (optional).

4186

BIS, Guwahati Branch Laboratory (GBL)

None

IS 12600 (1989)

Portland cement, low heat - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 v ( Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.2 (Lime after deduction of that necessary to combine with Sulphuric anhydride - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 note 2 (Alkali content as Na2O - Cl 4.11 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-

-
Disabled.

4187

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	2000	-
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	2000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	2000	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	0	-
15(MOISTURE RESISTANCE)	-	3000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

4188

BIS, Northern Regional Laboratory (NRL)

None

IS 5950 (2024)

Shot Firing Cables (for Use Other than in Shafts) - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Section-2, Cl-3 (CONDUCTOR)	-
Section-2, Cl-4 (INSULATION)	-
Section-2, Cl-5 (SHEATH)	-
Section-3, Cl-6 (CONDUCTOR)	-
Section-3, Cl-7.1.1 (Thickness of Insulation & Sheath)	-
Section-3, Cl-7.2 (Tolerance on Thickness of Insulation)	-
Section-3, Cl-7.3 (Colour of Insulation)	-
Cl-9.1 (a) (Annealing test;)	-
Cl-9.1 (b) (Conductor resistance test)	-
Cl-9.1 (d) 1 (Tensile strength and elongation at break)	-
Cl-9.1 (d) 2 (Ageing in air oven)	-
Cl-9.1 (d) 3 (Loss of mass test)	-
Cl-9.1 (d) 4 (Hot deformation)	-
Cl-9.1 (d) 5 (Heat shock)	-
Cl-9.1 (d) 6 (hrinkage)	-
Cl-9.2 , e (Insulation resistance test)	-
Cl-10.4 (Flammability Test)	-
Cl-10.2 (Voltage Test)	-
Section-2, Cl-3 (CONDUCTOR)	-
Section-2, Cl-4 (INSULATION)	-
Section-2, Cl-5 (SHEATH)	-
Section-3, Cl-6 (CONDUCTOR)	-
Section-3, Cl-7.1.1 (Thickness of Insulation & Sheath)	-
Section-3, Cl-7.1.2 (Type II)	-
Section-3, Cl-7.2 (Tolerance on Thickness of Insulation)	-
Section-3, Cl-7.3 (Colour of Insulation)	-
Section-3, Cl-8.1 (Single-Core)	-
Section-3, Cl-8.2 (Tolerance on Thickness of Sheath)	-
Section-3, Cl-8.3 (Color of Sheath)	-
Cl-10.2 (Voltage Test)	-
Cl-10.4 (Flammability Test)	-
Cl-9.1 (a) (Annealing test;)	-
Cl-9.1 (b) (Conductor resistance test)	-
Cl-9.1 (c) (Test for thickness of insulation and sheath)	-
Cl-9.1 (d) 1 (Tensile strength and elongation at break)	-
Cl-9.1 (d) 2 (Ageing in air oven)	-
Cl-9.1 (d) 3 (Loss of mass test)	-
Cl-9.1 (d) 4 (Hot deformation)	-
Cl-9.1 (d) 5 (Heat shock)	-
Cl-9.1 (d) 6 (hrinkage)	-
Cl-9.2 , e (Insulation resistance test)	-

-
-

4189

GIGA LABS, BENGALURU

6177526

IS/IEC 61439 : Part 6 (2012)

Low-Voltage Switchgear and Controlgear Assemblies Part 6 Busbar Trunking Systems (Busways)

Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)

600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Symbols and abbreviations)	-	10000	-
5.1(General)	-	10000	-
5.2(Voltage ratings)	-	10000	-
5.3(Current ratings)	-	10000	-
5.4(Rated diversity factor (RDF))	-	10000	-
5.5(Rated frequency (fn ))	-	10000	-
5.6(Other characteristics)	-	10000	-
6(Information)	-	10000	-
7.1(Normal service conditions)	-	5000	-
7.2(Special service conditions)	-	5000	-
7.3(Conditions during transport, storage and installation)	-	5000	-
8(Constructional requirements)	-	10000	-
9(Performance requirements)	-	100000	-
10.1(General)	-	5000	-
10.2(Strength of materials and parts)	-	150000	-
10.3(Degree of protection of ASSEMBLIES)	-	30000	-
10.4(Clearances and creepage distances)	-	10000	-
10.5(Protection against electric shock and integrity of protective circuits)	-	25000	-
10.7(Internal electrical circuits and connections)	-	5000	-
10.8(Terminals for external conductors)	-	5000	-
10.9(Dielectric properties)	-	20000	-
10.1(Verification of temperature rise)	-	100000	-
10.11(Short-circuit withstand strength)	-	30000	-
10.13(Mechanical operation)	-	10000	-
10.6(Incorporation of switching devices and components)	-	5000	-

08 Apr, 2027

-
Included w.e.f. 30.07.2025 Exclusion: 10.12 (Electromagnetic compatibility (EMC))

4190

Central Power Research Institute (CPRI), Bangalore

6101024

IS 13340 : Part 2 (2024)

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 2 Ageing Test, Self-Healing Test and Destruction Test (First Revision)

423740 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-17.1.1(Ageing test- General)	-	278990	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request. This Cl. is part of Cl. 17 and total test charge for Cl. 17 is 278990.
Cl-17.1.2(Testing in air with forced circulation)	-	278990	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request. This Cl. is part of Cl. 17 and total test charge for Cl. 17 is 278990.
Cl-17.1.3(Testing in a liquid bath)	-	278990	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request. This Cl. is part of Cl. 17 and total test charge for Cl. 17 is 278990.
Cl-17.2(Test sequence)	-	278990	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request. This Cl. is part of Cl. 17 and total test charge for Cl. 17 is 278990.
Cl-17.3(Ageing test- Test requirements)	-	278990	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request. This Cl. is part of Cl. 17 and total test charge for Cl. 17 is 278990.
Cl-18(Self-healing test)	-	5140	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
Cl-19.1(Destruction test- Test sequence)	-	139610	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request. This Cl. is part of Cl. 19 and total test charge for Cl. 19 is 139610.
Cl-19.2(Destruction test- Test Requirements)	-	139610	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request. This Cl. is part of Cl. 19 and total test charge for Cl. 19 is 139610.

31 Dec, 2026

-
Included w.e.f.28.07.2025

4191

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 45 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 45 electric heating tools

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	2000	-
12(Operation Under Overload Condition)	-	2000	-
13(Electric Insulation at Operating Temperature)	-	2000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	2000	-
15(Moisture Resistance)	-	3000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Creepage Distances & Clearances)	-	2000	-
30(Resistance to Heat, Fire and Tracking)	-	2000	-
XXV of Table 101(Resistance to Rusting)	-	2000	-
4(General Requirement)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

4192

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

220000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	4000	10% discount for BIS
6(Classification- IS 302-1)	-	0	NA
5(General conditions for the tests)	-	0	NA
19.11.4.7(Harmonics)	-	0	Applied under exclusion
19.11.4.5(Immunity to conducted discharges)	-	20000	10% discount for BIS
19.11.4.4(Surge immunity test)	-	20000	10% discount for BIS
19.11.4.3(Fast transient bursts)	-	20000	10% discount for BIS
19.11.4.1(Electrostatic discharges)	-	20000	10% discount for BIS
11.8(Temperature rise)	-	10000	10% discount for BIS
11.7(Duration corresponding)	-	0	NA
11.6(Combined appliances)	-	0	NA
11.5(Motor-operated appliances)	-	0	NA
11.4(Heating appliances)	-	0	NA
8.1.5(Live parts of built-in appliances)	-	1500	10% discount for BIS
18(Endurance)	-	0	Under Exclusion
17(Overload protection of transformers and associated circuits)	-	0	NA
16(Leakage current and electric strength)	-	7500	10% discount for BIS
4(General requirement)	-	0	NA
32.1(Radiation Toxicity and Similar Hazards)	-	0	Applied Under Exclusion
31(Resistance to Rusting)	-	0	Only applicable to part 2 standards
30.2(Needle Flame Test)	-	7500	10% discount for BIS
30.2(Glow Wire Test)	-	5000	10% discount for BIS
30.1(Ball pressure test)	-	5000	10% discount for BIS
29(clearance, creepage distances and solid insulation)	-	4500	10% discount for BIS
28(Screw test and connections)	-	4000	10% discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	5000	10% discount for BIS
26(Terminals for external conductors)	-	4000	10% discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	4000	10% discount for BIS
24(Components)	-	0	Under Exclusion
23.1(Internal Wiring, IS 302-1)	-	4000	10% discount for BIS
22.1(Construction, IS 302-1)	-	5000	10% discount for BIS
21.1(Mechanical Strength, IS 302-1)	-	4000	10% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	4000	10% discount for BIS
19(Abnormal Operation)	-	12500	10% discount for BIS
18(Endurance)	-	0	Applied Under Exclusion
17(Over Load Protection of Transformers and associated circuits)	-	7500	10% discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	5000	10% discount for BIS
16.2(Leakage Current (after Clause 15))	-	5000	10% discount for BIS
16.1(General)	-	0	NA
16.0(General)	-	0	NA
15.3(Humidity Test)	-	7000	10% discount for BIS
15.2(Spillage Test)	-	5000	10% discount for BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	7000	10% discount for BIS
14(Transient Over Voltages)	-	7500	10% discount for BIS
13.3(Electric Strength at operating temperature)	-	5000	10% discount for BIS
13(Leakage current and electric strength at operating temperature)	-	10000	10% discount for BIS
11.3(Heating)	-	1000	10% discount for BIS
11.2(General)	-	0	NA
11.1(General)	-	0	NA
10.2(Current input)	-	4000	10% discount for BIS
10.1(Power input)	-	4000	10% discount for BIS
9(Starting of motor operation test requirements and tests)	-	0	NA
8.1.4(Protection against live parts against protective impedance)	-	1500	10% discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1500	10% discount for BIS
8.1.2(Protection against live parts in openings)	-	1500	10% discount for BIS
8.1.1(Protection against live parts in all positions)	-	1000	10% discount for BIS
7(Marking and instructions)	-	3000	10% discount for BIS
A.2(Earth continuity test)	-	3000	10% discount for BIS
Annex C(Ageing test on motors)	-	7500	10% discount for BIS
Annex D(Thermal motor protectors)	-	7500	10% discount for BIS
15.2(Moisture resistance)	-	5000	10% discount for BIS
19.17(Abnormal Operation, IS 302-1)	-	4000	10% discount for BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	10% discount for BIS
21.2(Mechanical Strength, IS 302-1)	-	1000	10% discount for BIS
21.3(Mechanical Strength, IS 302-1)	-	1000	10% discount for BIS
22.5(Construction)	-	1000	10% discount for BIS
22.6(Construction, IS 302-1)	-	1000	10% discount for BIS
22.11(Construction, IS 302-1)	-	1000	10% discount for BIS
22.16(Construction)	-	1000	10% discount for BIS
22.32(Construction, IS 302-1)	-	0	Applied Under Exclusion
22.42(Construction)	-	1000	10% discount for BIS
23.3(Internal Wiring, IS 302-1)	-	1000	10% discount for BIS
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	NA
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	10% discount for BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	10% discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	10% discount for BIS
26.5(Terminals for external conductors)	-	4000	10% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	5000	10% discount for BIS
28.1(Screws and connections)	-	1000	10% discount for BIS
22.2(Construction, IS 302-1)	-	1000	10% discount for BIS
22.3(Construction, IS 302-1)	-	1000	10% discount for BIS
B.22.4(Construction, IS 302-1)	-	1000	10% discount for BIS
B.22.5(Construction, IS 302-1)	-	1000	10% discount for BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	20000	10% discount for BIS
15.0(Moisture resistance)	-	15000	10% discount for BIS
13.2(Leakage current at operating temperature)	-	5000	10% discount for BIS
12(Charging of metal-ion batteries)	-	0	Duplicate Entry
6(Classification- IS 302-1)	-	0	Duplicate Entry
5(General conditions for the tests)	-	0	Duplicate Entry
19.11.4.5(Immunity to conducted discharges)	-	0	Duplicate Entry
19.11.4.4(Surge immunity test)	-	0	Duplicate Entry
19.11.4.3(Fast transient bursts)	-	0	Duplicate Entry
19.11.4.1(Electrostatic discharges)	-	0	Duplicate Entry
11.8(Temperature rise)	-	0	Duplicate Entry
11.7(Duration corresponding)	-	0	Duplicate Entry
11.6(Combined appliances)	-	0	Duplicate Entry
11.5(Motor-operated appliances)	-	0	Duplicate Entry
11.4(Heating appliances)	-	0	Duplicate Entry
8.1.5(Live parts of built-in appliances)	-	0	Duplicate Entry
17(Overload protection of transformers and associated circuits)	-	0	Duplicate Entry
16(Leakage current and electric strength)	-	0	Duplicate Entry
4(General requirement)	-	0	Duplicate Entry
31(Resistance to Rusting)	-	0	Duplicate Entry
30.2(Needle Flame Test)	-	0	Duplicate Entry
30.2(Glow Wire Test)	-	0	Duplicate Entry
30.1(Ball pressure test)	-	0	Duplicate Entry
29(clearance, creepage distances and solid insulation)	-	0	Duplicate Entry
28(Screw test and connections)	-	0	Duplicate Entry
27.1(Provision for Earthing, IS 302-1)	-	0	Duplicate Entry
26(Terminals for external conductors)	-	0	Duplicate Entry
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Duplicate Entry
23.1(Internal Wiring, IS 302-1)	-	0	Duplicate Entry
22.1(Construction, IS 302-1)	-	0	Duplicate Entry
21.1(Mechanical Strength, IS 302-1)	-	0	Duplicate Entry
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	Duplicate Entry
19(Abnormal Operation)	-	0	Duplicate Entry
18(Endurance)	-	0	Duplicate Entry
17(Over Load Protection of Transformers and associated circuits)	-	0	Duplicate Entry
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Duplicate Entry
16.2(Leakage Current (after Clause 15))	-	0	Duplicate Entry
16.1(General)	-	0	Duplicate Entry
16.0(General)	-	0	Duplicate Entry
15.3(Humidity Test)	-	0	Duplicate Entry
15.2(Spillage Test)	-	0	Duplicate Entry
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Duplicate Entry
14(Transient Over Voltages)	-	0	Duplicate Entry
13.3(Electric Strength at operating temperature)	-	0	Duplicate Entry
13(Leakage current and electric strength at operating temperature)	-	0	Duplicate Entry
11.3(Heating)	-	0	Duplicate Entry
11.2(General)	-	0	Duplicate Entry
11.1(General)	-	0	Duplicate Entry
10.2(Current input)	-	0	Duplicate Entry
10.1(Power input)	-	0	Duplicate Entry
9(Starting of motor operation test requirements and tests)	-	0	Duplicate Entry
8.1.4(Protection against live parts against protective impedance)	-	0	Duplicate Entry
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Duplicate Entry
8.1.2(Protection against live parts in openings)	-	0	Duplicate Entry
8.1.1(Protection against live parts in all positions)	-	0	Duplicate Entry
7(Marking and instructions)	-	0	Duplicate Entry
A.2(Earth continuity test)	-	0	Duplicate Entry
Annex C(Ageing test on motors)	-	0	Duplicate Entry
Annex D(Thermal motor protectors)	-	0	Duplicate Entry
15.2(Moisture resistance)	-	0	Duplicate Entry
19.17(Abnormal Operation, IS 302-1)	-	0	Duplicate Entry
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Duplicate Entry
21.2(Mechanical Strength, IS 302-1)	-	0	Duplicate Entry
21.3(Mechanical Strength, IS 302-1)	-	0	Duplicate Entry
22.5(Construction)	-	0	Duplicate Entry
22.6(Construction, IS 302-1)	-	0	Duplicate Entry
22.11(Construction, IS 302-1)	-	0	Duplicate Entry
22.16(Construction)	-	0	Duplicate Entry
22.42(Construction)	-	0	Duplicate Entry
23.3(Internal Wiring, IS 302-1)	-	0	Duplicate Entry
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	Duplicate Entry
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Duplicate Entry
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Duplicate Entry
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Duplicate Entry
26.5(Terminals for external conductors)	-	0	Duplicate Entry
27.5(Provision for Earthing, IS 302-1)	-	0	Duplicate Entry
28.1(Screws and connections)	-	0	Duplicate Entry
22.2(Construction, IS 302-1)	-	0	Duplicate Entry
22.3(Construction, IS 302-1)	-	0	Duplicate Entry
B.22.4(Construction, IS 302-1)	-	0	Duplicate Entry
B.22.5(Construction, IS 302-1)	-	0	Duplicate Entry
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	Duplicate Entry
15.0(Moisture resistance)	-	0	Duplicate Entry
13.2(Leakage current at operating temperature)	-	0	Duplicate Entry

-
Included w.e.f 28.07.2025 Exclusion: Cl 19.11.4.2 (Radiated fields), Cl 19.11.4.7 (Harmonics), Cl 18 (Endurance), Cl 22.32 (Construction), Cl 24 (Components), Cl 32 (Radiation Toxicity and Similar Hazards) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

4193

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 3 (2024)

Vitreous China Sanitary Appliances - Specification Part 3 Specific Requirements of Squatting Pans (sixth revision)

Long/Orissa/Rural/ Any other Pattern or size

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(GENERAL REQUIREMENTS)	-	200	-
Cl-5(CONSTRUCTION)	-	200	-
Cl-6.1, Table-1 (i)(Length)	-	200	-
Cl-6.1, Table-1 (ii)(Length of opening, &fin)	-	200	-
Cl-6.1, Table-1 (iii)(Height)	-	200	-
Cl-6.1, Table-1 (iv)(Width of opening, small end)	-	200	-
Cl-6.1, Table-1 (v)(Width of opening, wide end)	-	200	-
Cl-6.1, Table-1 (vi)(Slope of bottom of pan)	-	200	-
Cl-6.1, Table-1 (vii)("Distance between the centre of outlet to the inside face of flushing rim at the back, Mm")	-	200	-
Cl-6.1, Table-1 (viii)(Width)	-	200	-
Cl-6.1, Table-1 (ix)(Length of footrest)	-	200	-
Cl-6.2,(Connecting Dimensions)	-	200	-
Cl-7(FINLSH)	-	200	-
Cl-8(FLUSHING TESTS)	-	400	-
Cl-8.1(Toilet Paper Test)	-	400	-
Cl-8.2(Smudge Test)	-	400	-
Cl-8.3(Water Holding Capacity Test)	-	400	-
Cl-8.4(Saw Dust Test)	-	400	-
Cl-8.5(Splash Test)	-	400	-
Cl-10(Marking)	-	200	-

-
Included w.e.f.03.07.02025

4194

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	2000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	2000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	2000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-32 : 1994(Construction )	-	2000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	2000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	0	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	2000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	2000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	2000	-
Cl. 7 302-2-32 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

4195

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 8931 (2021)

Copper alloy single taps, combination tap assemblies, stop valves and single lever mixers for water services Specification (second revision)

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Classfication)	-	100	-
Cl 4(Classfication)	-	100	-
Cl 6.1(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.5(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.6(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.7(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.8(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.9(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.10(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.11(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.12(Manufacture,Workmanship & Construction)	-	2000	-
Cl 6.13(Manufacture,Workmanship & Construction)	-	2000	-
Cl 7(DIMENSIONS)	-	2000	-
Cl 7(DIMENSIONS)	-	2000	-
Cl 7(DIMENSIONS)	-	2000	-
Cl 7(DIMENSIONS)	-	2000	-
Cl 7(DIMENSIONS)	-	2000	-
Cl 8(ADDITIONAL REQUIREMENTS FOR ACCESSIBLE TAPS)	-	5000	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	4000	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	4000	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	4000	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	4000	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	4000	-
Cl 11(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	5000	-
As per Table-1(Carbon)	-	1500	-
As per Table-1(Sulphur)	-	1500	-
As per Table-1(Phosphorus)	-	1500	-
As per Table-1(Manganese)	-	1500	-
As per Table-1(Nitrogen)	-	1500	-
As per Table-1(Silicon)	-	1500	-
As per Table-1(Aluminium)	-	1500	-
As per Table-1(Chromium)	-	1500	-
As per Table-1(Vanadium)	-	1500	-
As per Table-1(Molybdenum)	-	1500	-
As per Table-1(Iron)	-	1500	-
As per Table-1(Nickel)	-	1500	-
As per Table-1(Copper)	-	1500	-
As per Table-1(Zinc)	-	1500	-
As per Table-1(Lead)	-	1500	-
As per Table-1(Boron)	-	1500	-

15 Aug, 2028

-
Included w.e.f.03.07.2025

4196

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
13.1 &13.2(Leakage current test)	-	2000	-
13.1 &13.3(Electric strength test)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.101(Moisture resistance)	-	5000	-
16.1 &16.2(Leakage current test)	-	2000	-
16.1 & 16.3(Electric strength test)	-	3000	-
17(Overload protection of transformers and associated circuits)	-	3000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	3000	-
19.101 to to 19.102(Abnormal operation)	-	3000	-
20(Stability and mechanical hazards)	-	3000	-
21(Mechanical strength)	-	3000	-
22(Construction)	-	5000	-
22.101(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
31(Resistance to rusting)	-	5000	-

03 Dec, 2026

-
Included w.e.f.28.07.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7(EMI/EMC) 32(Radiation, toxicity and similar hazards

4197

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	6000	For complete chemical test
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	6000	For complete chemical test
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	6000	For complete chemical test
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	6000	For complete chemical test
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	6000	For complete chemical test
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	6000	For complete chemical test
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	6000	For complete chemical test
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1000.01	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1000.02	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	1000	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	2000	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	2000.02	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	1000	-
7.2(Uniformity Requirements)	-	0	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2000	-
5.1&7.1, table-2 (III)(Lime Reactivity)	-	2000	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2000	-

-
Included w.e.f.16.07.2025

4198

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 15138 (2024)

Textiles - Jute Bags For Packing 50 Kg Sugar - Specification (second revision)

Type A to Type E

2400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4.1(Febric)	-	250	-
As per Clause 4.2(Seam)	-	250	-
As per Clause 4.3(Hemming at the mouth)	-	150	-
As per Clause 4.4(Freedom from defects)	-	150	-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	150	-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	100	-
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	100	-
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	250	-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	250	-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	250	-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	250	-
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	250	-
As per Clause 4.1(Febric)	-	0	-
As per Clause 4.2(Seam)	-	0	-
As per Clause 4.3(Hemming at the mouth)	-	0	-
As per Clause 4.4(Freedom from defects)	-	0	-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	0	-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	0	-
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	0	-
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	0	-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	0	-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	0	-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	0	-
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	0	-

31 Dec, 2026

-
Included w.e.f 11.07.2025

4199

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	100	-
13.2 (mech)(Visual Examination)	-	100	-
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	200	-
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	200	-
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	700	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	100	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	100	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	700	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	300	-
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	100	-
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	100	-
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	500	-
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	100	-
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	300	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	100	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	200	-
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	500	-
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	2000	-
13.9.2 (chem)(Mass of Zinc coating)	-	500	-
13.9.2 (chem)(Uniformity of Zinc coating)	-	500	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	200	-
13.10 (elec)(Surface condition test)	-	3700	-
13.11 (elec)(Corona Test)	-	0	-
13.12 (elec)(Radio Interference Voltage Test)	-	0	-
10.4 (mech)(Direction of lay)	-	100	-
13.5.2 & Table 2 (mech)(Breaking load of steel wire before stranding)	-	100	-
13.9 (elec)(The test of galvanising)	-	100	-
8.2.1 (elec)(Size of complete conductor)	-	100	-
8.2.2 (elec)(Resistance of complete conductor)	-	1000	-
10.4 (elec)(Direction of lay)	-	100	-
13.5.2 & Table 2 (elec)(Breaking load of steel wire before stranding)	-	100	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	200	-
13.9.2 (elec)(Uniformity of Zinc coating)	-	500	-
13.9.2 (elec)(Mass of Zinc coating)	-	500	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	200	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.7.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	-
13.7.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	100	-
13.6.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.6.2 (elec)(Ductility by Elongation Test before stranding)	-	100	-
13.6.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.6.1 (elec)(Ductility by Torsion Test before stranding)	-	100	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	300	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	700	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	100	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	100	-
13.3 Table-2 (elec)(Diameter-Galvanized Steel wires)	-	200	-
13.3 Table-1 (elec)(Diameter-Aluminium wires)	-	200	-
13.2 (elec)(Visual Examination)	-	100	-
13.2(Visual Examination)	-	100	-
13.2(Visual Examination)	-	100	-
13.3(Diameter(mm), Aluminium wire)	-	200	-
13.3(Diameter(mm), Aluminium wire)	-	200	-
13.3(Diameter(mm), Steel Wire)	-	100	-
13.3(Diameter(mm), Steel Wire)	-	100	-
10(Stranding)	-	100	-
10(Stranding, Direction of Outermost layer)	-	100	-
10(Stranding, Ratio of diameter of Aluminium)	-	100	-
10.2, table 4(Lay Ratio, Aluminium Wire Outer of Layer)	-	300	-
10.2, table 4(Lay Ratio, Aluminium Wire, Layer immediately)	-	200	-
10.2, table 4(Lay Ratio, Aluminium Wire, Inner most layer of three Aluminium wire)	-	250	-
10.2, table 4(Lay Ratio, Steel wire, (6 wire layar))	-	250	-
13.5.2(Breaking Load, Aluminium wire(Before Stranding))	-	100	-
13.5.2(Breaking Load, Steel wire (Before Stranding))	-	100	-
13.5.2(Breaking Load Steel wire (After Stranding))	-	300	-
13.5.2(Breaking Load Aluminium wire (After Stranding))	-	700	-
13.6("Ductility Test on steel wire, Torsion Test ")	-	500	-
13.6(Ductility Test on steel wire, Torsion Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.7(Wrapping Test, Aluminium wire)	-	300	-
13.7(Wrapping Test, Steel wire)	-	300	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
9(Joint in wires,)	-	200	-
9(Joint in wires,)	-	200	-
13.1(Surface Condition Test)	-	3700	-
13.11(Corona Test)	-	0	-
13.12(Radio Interference Voltage Test)	-	0	-

31 Dec, 2026

-
Included w.e.f 28.07.2025 Exclusion: Cl 13.11 (Corona Test), Cl 13.12 (Radio Interference Voltage Test)

4200

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

All Grade / Type / Size / Designation etc.

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14 (a)(Marking)	-	500	-
14 (b)(Marking)	-	500	-
14 (c)(Marking)	-	500	-
14 (d)(Marking)	-	500	-
14 (e)(Marking)	-	500	-
14 (f)(Marking)	-	500	-
14 (g)(Marking)	-	500	-
14.2(Marking)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
11(Freedom from defects)	-	500	-
9.1(Galvanizing Requirements )	-	1500	-
9.2(Galvanizing Requirements )	-	1500	-
9.3(Galvanizing Requirements )	-	1500	-
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	700	-
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	1500	-
8.2(Mechanical Properties (as per IS 1717))	-	700	-
8.3(Mechanical Properties (as per IS 1755))	-	600	-
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	1200	-
14(Marking)	-	500	-
14 (a)(Marking)	-	500	-
14 (b)(Marking)	-	500	-
14 (c)(Marking)	-	500	-
14 (d)(Marking)	-	500	-
14 (e)(Marking)	-	500	-
14 (f)(Marking)	-	500	-
14 (g)(Marking)	-	500	-
14.2(Marking)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
7(Dimensions)	-	500	-
11(Freedom from defects)	-	500	-
9.1(Galvanizing Requirements )	-	1500	-
9.2(Galvanizing Requirements )	-	1500	-
9.3(Galvanizing Requirements )	-	1500	-
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	1500	-
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	1500	-
8.2(Mechanical Properties (as per IS 1717))	-	700	-
8.3(Mechanical Properties (as per IS 1755))	-	600	-
8.4(Mechanical Properties (as perIS 10810(Part- 42)))	-	1200	-
Clause 6.1, Table-1(Sulphur)	-	1000	-
Clause 6.1, Table-1(Phosphorus)	-	1000	-
6.2(Phosphorus %)	-	1000	-
6.2(Sulphur %)	-	1000	-
6.2( Nitrogen%)	-	1000	-
6.2(Phosphorus %)	-	1000	-
6.2(Sulphur %)	-	1000	-
6.2( Nitrogen%)	-	1000	-
6.2(Phosphorus %)	-	1000	-
6.2(Sulphur %)	-	1000	-
6.2( Nitrogen%)	-	1000	-
7(Dimensions)	-	500	-

-
Included w.e.f. 12.11.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number