| 4201 |
Rajkot Metlab Services LLP, Rajkot
| 7183706
| IS 737 (2024) |
WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision) |
- |
14450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4(Ordering Information - IS 737) |
- |
100 |
|
- |
| Cl. 4 (a)(Grade/ Thickness - IS 737) |
- |
100 |
|
- |
| Cl. 4 (b)(Condition - IS 737) |
- |
100 |
|
- |
| Cl. 4 (c)(Quantity in Kg - IS 737) |
- |
100 |
|
- |
| Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737) |
- |
100 |
|
- |
| Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737) |
- |
100 |
|
- |
| Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737) |
- |
100 |
|
- |
| Cl. 4 (g)(Packing Mode - IS 737) |
- |
100 |
|
- |
| Cl. 5(Supply for Material - IS 737/ IS 10259) |
- |
100 |
|
- |
| Cl. 6(Freedom from Defects - IS 737) |
- |
100 |
|
- |
| Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
5000 |
|
- |
| Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
2000 |
|
- |
| Cl. 7(Al - IS 504) |
- |
2000 |
|
- |
| Cl. 8(Mechanical Properties - IS 1608 (Part-1)) |
- |
4000 |
|
- |
| Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1)) |
- |
2000 |
|
- |
| Cl. 8.1(Tensile Strength - IS 1608 (Part-1)) |
- |
2000 |
|
- |
| Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1)) |
- |
2000 |
|
- |
| Cl. 8.2(Bend Test - IS 1599) |
- |
2000 |
|
- |
| Cl. 9(Condition - IS 737/ IS 5052) |
- |
1000 |
|
- |
| Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676) |
- |
1000 |
|
- |
| Cl. 11(Selection of Test Samples - IS 737) |
- |
100 |
|
- |
| Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737) |
- |
100 |
|
- |
| Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737) |
- |
100 |
|
- |
| Cl. 12(Retests - IS 737/ IS 10259) |
- |
100 |
|
- |
| Cl. 13(Packaging - IS 737/ IS 10259) |
- |
100 |
|
- |
| Cl. 13.1(Marking - IS 737) |
- |
100 |
|
- |
|
12 Jan, 2028 |
-
Included w.e.f. 04.11.2025 |
| 4202 |
Rajkot Metlab Services LLP, Rajkot
| 7183706
| IS 736 (1986) |
Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision) |
- |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Freedom from defect) |
- |
1000 |
|
- |
| 5(chemical composition) |
- |
10000 |
|
- |
| 6.1 table 2(0.2% proof strength) |
- |
2000 |
|
- |
| 6.1 table 2(tensile strength) |
- |
2000 |
|
- |
| 6.1 table 2(Elongation) |
- |
2000 |
|
- |
| 8(Dimensions & Tolerances) |
- |
1000 |
|
- |
| 5.1, Table 1(Aluminium) |
- |
2000 |
|
- |
| 5.1, Table 1(Copper) |
- |
2000 |
|
- |
| 5.1, Table 1(Magnesium) |
- |
2000 |
|
- |
| 5.1, Table 1(Silicon) |
- |
2000 |
|
- |
| 5.1, Table 1(Iron) |
- |
2000 |
|
- |
| 5.1, Table 1(Mangnese) |
- |
2000 |
|
- |
| 5.1, Table 1(Zinc) |
- |
2000 |
|
- |
| 5.1, Table 1(Titanium and /or other grain refining element) |
- |
2000 |
|
- |
| 5.1, Table 1(Chromium) |
- |
2000 |
|
- |
| 5.1, Table 1(Vanadium) |
- |
2000 |
|
- |
|
12 Jan, 2028 |
-
Included w.e.f 06.01.2026 |
| 4203 |
Rajkot Metlab Services LLP, Rajkot
| 7183706
| IS 734 (1975) |
Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision) |
- |
14800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 table 1(chemical composition) |
- |
10000 |
|
- |
| 5.1 table 2(0.2% proof strength) |
- |
2000 |
|
- |
| 5.1 table 2(Tensile strength) |
- |
2000 |
|
- |
| 5.1 table 2(Elongation) |
- |
2000 |
|
- |
| Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods) |
- |
2000 |
|
- |
| 4.1(Freedom from defects) |
- |
500 |
|
- |
| 9.1(Tensile test) |
- |
5000 |
|
- |
|
12 Jan, 2028 |
-
Included w.e.f 12.11.2025 |
| 4204 |
Atckon Laboratories LLP, Bahadurgarh
| 8186436
| IS 1328 (2025) |
Veneered Decorative Plywood - Specification ( Fourth Revision ) |
- |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.1(Grades) |
- |
7999.97 |
|
- |
| Cl 4.2(Type) |
- |
7999.96 |
|
- |
| Cl 4.3(Formaldehyde Class) |
- |
7999.98 |
|
- |
| Cl 5.2(Adhesive) |
- |
7999.98 |
|
- |
| Cl 7.1(Surface Requirements- For Type 1) |
- |
7999.98 |
|
- |
| Cl 7.2(Surface Requirements- For Type 2) |
- |
7999.97 |
|
- |
| Cl 7.3(Surface Requirements- For Type 3) |
- |
7999.97 |
|
- |
| Cl 7.4(Surface Requirements- For Type 4) |
- |
8000 |
|
- |
| Cl 8.1(Dimensions (Length and Width)) |
- |
7999.98 |
|
- |
| Cl 8.2(Dimensions (Thickness)) |
- |
7999.99 |
|
- |
| Cl 8.3(Squareness and Edge Straightness as Per Annex B) |
- |
7999.98 |
|
- |
| Cl 8.4- Table 1(Tolerances) |
- |
7999.97 |
|
- |
| Cl 11.3(Moisture Content) |
- |
7999.98 |
|
- |
| Cl 11.4.1(a)(Water Resistance Test( For MR Grade)) |
- |
7999.98 |
|
- |
| Cl 11.4.1(b)(Water Resistance Test( For BWR Grade)) |
- |
7999.98 |
|
- |
| Cl 11.4.1(c)(Water Resistance Test( For BWP Grade)) |
- |
8000 |
|
- |
| Cl 11.5(Formaldehyde Content Test) |
- |
7999.98 |
|
- |
| Cl 11.6(Steady - State Formaldehyde Emission Test ( Optional Test)) |
- |
7999.98 |
|
- |
| Cl 12(Marking) |
- |
8000 |
|
- |
|
- |
-
Included w.e.f.12.09.2025 |
| 4205 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 2202 : Part 2 (2022) |
WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision |
- |
24500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause No - 6.1(Timber) |
- |
0 |
|
- |
| Clause No -6.2(Alternative Materials (LVL) |
- |
0 |
|
- |
| Clause No -6.2(Alternative Materials veneer laminated lumber (VLL)) |
- |
0 |
|
- |
| Clause No -6.2(Alternative Materials medium density fibre board (MDF)) |
- |
0 |
|
- |
| Clause No -6.2(Alternative Materials -plywood) |
- |
0 |
|
- |
| Clause No -6.4(Adhesive) |
- |
8000 |
|
Extra for IS 848 |
| Clause No -7.1(Construction) |
- |
500 |
|
- |
| Clause No - 7.3(" MDF board or
HDF board ") |
- |
500 |
|
- |
| Clause No -9.2("Workmanship and
finish") |
- |
500 |
|
- |
| Clause No -10.1(tests for flush door shutters) |
- |
19500 |
|
- |
| Clause No -10.2(End Immersion Test) |
- |
2000 |
|
- |
| Clause No -10.3(Glue Adhesion Test) |
- |
1000 |
|
- |
| Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY) |
- |
0 |
|
- |
| Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO
MARK") |
- |
0 |
|
- |
| 5(SIZES AND TOLERANCES) |
- |
500 |
|
- |
| 6.5(The swelling in thickness of the particle board, MDF
and HDF board for core) |
- |
500 |
|
- |
| Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door) |
- |
1000 |
|
- |
| Cl-6.3.2(MDF board and HDF board) |
- |
0 |
|
Extra as per IS |
| Cl-6.3.4(B N P V, P N P V and M N P V,) |
- |
0 |
|
Extra as per IS |
| Cl-7.2(Face Panel) |
- |
1000 |
|
- |
| Cl-7.4 (Amendment No 1)(Door Blanks) |
- |
1500 |
|
- |
| Cl-8(Fittings) |
- |
100 |
|
- |
| Clause No -6.2(BWP grade flush door shutter) |
- |
0 |
|
Extra as per IS |
| Clause No -6.3.1("Face Panels:
Particle Board
MDF/ HDF
Fibre Hardboard") |
- |
0 |
|
Extra as per IS 3087 |
|
18 Dec, 2027 |
-
Included w.e.f.17.09.2025 |
| 4206 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 2202 : Part 1 (2023) |
WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision |
- |
24500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.1(Workmanship & Finish) |
- |
100 |
|
- |
| 9.2(Workmanship & Finish) |
- |
100 |
|
- |
| 9.3(Workmanship & Finish) |
- |
100 |
|
- |
| 11.1(Dimensions - Height) |
- |
250 |
|
- |
| 11.1(Dimensions - Width) |
- |
250 |
|
- |
| 11.1(Dimensions - Thickness) |
- |
250 |
|
- |
| 11.1(Dimensions - Variation in thickness) |
- |
0 |
|
- |
| 11.1(Dimensions - Squareness) |
- |
250 |
|
- |
| 11.12(End immersion test) |
- |
2000 |
|
- |
| 11.13(Knife Test) |
- |
1000 |
|
- |
| 11.14(Glue Adhesion Test) |
- |
1500 |
|
- |
| 4(GRADE) |
- |
0 |
|
- |
| 4(TYPE) |
- |
0 |
|
- |
| 5(SIZES) |
- |
250 |
|
- |
| 7.1.1(CONSTRUCTION-Blockboard Core) |
- |
750 |
|
- |
| 7.1.1(CONSTRUCTION-Blockboard Core) |
- |
0 |
|
- |
| 7.1.2(CONSTRUCTION-Blockboard Core) |
- |
0 |
|
- |
| 7.3.2(CONSTRUCTION-Stiles and Rails) |
- |
250 |
|
- |
| 7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
0 |
|
- |
| 7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
0 |
|
- |
| 7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
0 |
|
- |
| 7.3.3(CONSTRUCTION-Stiles and Rails) |
- |
0 |
|
- |
| 9.1(WORKMANSHIP AND FINISH) |
- |
0 |
|
- |
| 9.2(WORKMANSHIP AND FINISH) |
- |
0 |
|
- |
| 9.3(WORKMANSHIP AND FINISH) |
- |
0 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
0 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
0 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
0 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
0 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
0 |
|
- |
| 11.2(General Flatness Test) |
- |
700 |
|
- |
| 11.2(General Flatness Test) |
- |
0 |
|
- |
| 11.2(General Flatness Test) |
- |
0 |
|
- |
| 11.3(Local Planeness Test) |
- |
1500 |
|
- |
| 11.4(Impact Indentation Test) |
- |
1500 |
|
- |
| 11.4(Impact Indentation Test) |
- |
0 |
|
- |
| 11.5(Flexure Test) |
- |
1500 |
|
- |
| 11.5(Flexure Test) |
- |
0 |
|
- |
| 11.6(Edge Loading Test) |
- |
1500 |
|
- |
| 11.6(Edge Loading Test) |
- |
0 |
|
- |
| 11.6(Edge Loading Test) |
- |
1500 |
|
- |
| 11.6(Edge Loading Test) |
- |
0 |
|
- |
| 11.7.1(Shock Resistance Test) |
- |
1500 |
|
- |
| 11.7.2(Shock Resistance Test) |
- |
0 |
|
- |
| 11.8(Buckling Test) |
- |
1500 |
|
- |
| 11.8(Buckling Test) |
- |
0 |
|
- |
| 11.8(Buckling Test) |
- |
0 |
|
- |
| 11.9.2(Slamming Test) |
- |
1500 |
|
- |
| 11.9.3(Slamming Test) |
- |
0 |
|
- |
| 11.11(Varying Humidity Test) |
- |
5000 |
|
- |
| 11.11(Varying Humidity Test) |
- |
0 |
|
- |
| 11.12(End Immersion Test) |
- |
0 |
|
- |
| 11.13(Knife Test) |
- |
0 |
|
- |
| 11.14(Glue Adhesion Test) |
- |
0 |
|
- |
| 11.15(Screw Withdrawal Resistance Test) |
- |
1500 |
|
- |
| 11.15(Screw Withdrawal Resistance Test) |
- |
0 |
|
- |
| Clause 4.2(grades specified) |
- |
0 |
|
- |
| Clause 5(SIZES) |
- |
0 |
|
- |
| Clause 6.1.1(species of timber) |
- |
0 |
|
- |
| Clause 6.1.2(list of species) |
- |
0 |
|
- |
| Clause 6.1.3(moisture content) |
- |
750 |
|
- |
| Clause 6.2.1(Plywood) |
- |
0 |
|
Extra as per IS |
| Clause 6.2.2(Decorative plywood) |
- |
0 |
|
Extra as per IS |
| Clause 6.3(Cross-Bands) |
- |
1000 |
|
Extra |
| Clause 6.4.1(Commercial Face
Veneers) |
- |
1000 |
|
Extra |
| Clause 6.4.2(Decorative Face
Veneers) |
- |
1000 |
|
Extra |
| Clause 6.6.1(Adhesives) |
- |
8000 |
|
For IS 848 |
| Clause 6.7(Particle Board) |
- |
750 |
|
Extra |
| Clause 6.8(Medium density
fibre board) |
- |
750 |
|
Extra |
| Clause 6.9(Alternative Materials) |
- |
0 |
|
- |
| Clause 7.1(Blockboard Core) |
- |
0 |
|
- |
| Clause 7.2(Particle Board or
Medium Density Fibre) |
- |
0 |
|
- |
| Clause 7.3(Stiles and Rails) |
- |
0 |
|
- |
| Clause 7.4(Levelling) |
- |
250 |
|
- |
| Clause 7.5(Face Panel) |
- |
250 |
|
- |
| Clause 7.6(Lipping) |
- |
250 |
|
- |
| Clause 7.7(Rebating) |
- |
250 |
|
- |
| Clause 7.8(Opening for Glazing) |
- |
250 |
|
- |
| Clause 7.9(Venetian) |
- |
250 |
|
- |
| Clause 8.1(Locks) |
- |
250 |
|
- |
| Clause 9(WORKMANSHIP AND
FINISH) |
- |
0 |
|
- |
| Clause 10.1(Classification of Tests) |
- |
0 |
|
- |
| Clause 11.1(Dimensions and
Squareness Test) |
- |
0 |
|
- |
| Clause 11.2(General Flatness Test) |
- |
0 |
|
- |
| Clause 11.3(Local Planeness Test) |
- |
0 |
|
- |
| Clause 11.4(Impact Indentation Test) |
- |
0 |
|
- |
| Clause 11.5(Flexure Test) |
- |
0 |
|
- |
| Clause 11.6(Edge Loading Test) |
- |
0 |
|
- |
| Clause 11.7(Shock Resistance Test) |
- |
0 |
|
- |
| Clause 11.8(Buckling Resistance Test) |
- |
0 |
|
- |
| Clause 11.9(Slamming Test) |
- |
0 |
|
- |
| Clause 11.10(Misuse Test) |
- |
0 |
|
- |
| Clause 11.11(Varying Humidity Test) |
- |
0 |
|
- |
| Clause 11.12(End Immersion Test) |
- |
0 |
|
- |
| Clause 11.13(Knife Test) |
- |
0 |
|
- |
| Clause 11.14(Glue Adhesion Test) |
- |
0 |
|
- |
| Clause 11.15(Screw Withdrawal
Resistance Test) |
- |
0 |
|
- |
| Clause 12(SAMPLING AND CRITERIA
FOR CONFORMITY) |
- |
0 |
|
- |
| Clause 13(ADDITIONAL REQUIREMENTS
FOR ECO MARK) |
- |
0 |
|
- |
| Clause 14(Marking) |
- |
0 |
|
- |
| 4(Grade, Type and Construction) |
- |
0 |
|
- |
| 5(Sizes and Thickness) |
- |
0 |
|
- |
| 6.1(Timber) |
- |
0 |
|
- |
| 6.2(Plywood for flush door shutter) |
- |
0 |
|
- |
| 6.3(Cross-Bands ) |
- |
0 |
|
- |
| 6.4.1(Commercial Face Veneers) |
- |
0 |
|
- |
| 6.4.2(Decorative face veneers) |
- |
0 |
|
- |
| 6.6(Adhesives) |
- |
0 |
|
- |
| 6.7(Particle Board) |
- |
0 |
|
- |
| 6.8(Medium Density Fibre) |
- |
0 |
|
- |
| 6.9(Alternative Materials) |
- |
0 |
|
- |
| 7(Construction) |
- |
0 |
|
- |
| 8.1(Locks) |
- |
0 |
|
- |
| 8.2(Other Fittings) |
- |
0 |
|
- |
| 9(Workmanship and Finish) |
- |
0 |
|
- |
| 10(Tests) |
- |
0 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
0 |
|
- |
| 11.2(General Flatness Test) |
- |
0 |
|
- |
| 11.3(Local Planeness Test) |
- |
0 |
|
- |
| 11.4(Impact Indentation Test) |
- |
0 |
|
- |
| 11.5(Flexure Test) |
- |
0 |
|
- |
| 11.6(Edge Loading Test) |
- |
0 |
|
- |
| 11.7(Shock Resistance Test) |
- |
0 |
|
- |
| 11.8(Buckling Resistance Test) |
- |
0 |
|
- |
| 11.9(Slamming Test) |
- |
0 |
|
- |
| 11.1(Misuse Test) |
- |
0 |
|
- |
| 11.11(Varying Humidity Test) |
- |
0 |
|
- |
| 11.12(End Immersion Test) |
- |
0 |
|
- |
| 11.13(Knife Test) |
- |
0 |
|
- |
| 11.14(Glue Adhesion Test) |
- |
0 |
|
- |
| 11.15(Screw Withdrawal Resistance Test) |
- |
0 |
|
- |
| 14(Marking ) |
- |
0 |
|
- |
| Cl-13(ADDITIONAL REQUIREMENTS FOR ECO
MARK) |
- |
0 |
|
- |
| 11.10(Misuse Test) |
- |
0 |
|
- |
|
18 Dec, 2027 |
-
Included w.e.f.17.09.2025 |
| 4207 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 2191 : Part 2 (2022) |
WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision) |
- |
24500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5(Sizes and Tolerances) |
- |
100 |
|
For thickness |
| Cl-6.1.(Timber) |
- |
0 |
|
- |
| Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF)) |
- |
0 |
|
- |
| Cl-6.3.1(Particle board) |
- |
0 |
|
Extra chages as per IS 3087 |
| Cl-6.3.2(MDF board and HDF board) |
- |
0 |
|
Extra charges as per IS 12406 |
| Cl-6.3.5(shutters with fibre hardboard face) |
- |
0 |
|
- |
| Cl-8.1(Locks) |
- |
100 |
|
- |
| Cl-10.1(various test) |
- |
19700 |
|
For Cl. 10 to 11 of IS 2191 (Part 1) |
| Cl-10.2(End Immersion Test) |
- |
2000 |
|
- |
| Cl-10.3(Glue Adhesion Test) |
- |
1500 |
|
- |
| Cl-13(Marking) |
- |
0 |
|
- |
|
18 Dec, 2027 |
-
Included w.e.f.17.09.2025 |
| 4208 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 2191 : Part 1 (2022) |
WOODEN FLUSH DOOR SHUTTERS CELLULAR TUBULAR AND HOLLOW CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Fifth Revision |
- |
24500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5(Sizes) |
- |
100 |
|
For thickness |
| Cl-6.1.1(Species of timber) |
- |
0 |
|
- |
| Cl-6.3(Cross-Bands) |
- |
1000 |
|
Extra for cross band |
| Cl-6.4.1(Commercial face veneers) |
- |
1000 |
|
Extra for face veneers |
| Cl-6.4.2(Decorative face veneers) |
- |
1000 |
|
Extra for face veneers |
| Cl-6.7(Particle Board) |
- |
0 |
|
- |
| Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF)) |
- |
0 |
|
- |
| Cl-11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| Cl-11.2(General Flatness Test) |
- |
700 |
|
- |
| Cl-11.3(Local Planeness Test) |
- |
1500 |
|
- |
| Cl-11.4(Impact Indentation Test) |
- |
1500 |
|
- |
| Cl-11.5(Flexure Test) |
- |
1500 |
|
- |
| Cl-11.6(Edge Loading Test) |
- |
1500 |
|
- |
| Cl-11.7(Shock Resistance Test) |
- |
1500 |
|
- |
| Cl-11.8(Buckling Resistance Test) |
- |
1500 |
|
- |
| Cl-11.9(Slamming Test) |
- |
1500 |
|
- |
| Cl-11.10(Misuse Test) |
- |
1500 |
|
- |
| Cl-11.11(Varying Humidity Test) |
- |
5000 |
|
- |
| Cl-11.12(End Immersion Test) |
- |
2000 |
|
- |
| Cl-11.13(Knife Test) |
- |
1000 |
|
- |
| Cl-11.14(Glue Adhesion Test) |
- |
1500 |
|
- |
| Cl-11.15(Screw Withdrawal Resistance Test) |
- |
1500 |
|
- |
| Cl-12.2(Sample Size) |
- |
0 |
|
- |
| Cl-14(Marking) |
- |
0 |
|
- |
| Cl-6.1.2(Moisture content of timber) |
- |
750 |
|
- |
| Cl-9(Workmanship and Finish) |
- |
100 |
|
- |
| Cl-6.1.3(Defects) |
- |
100 |
|
- |
| Cl-6.2(Plywood) |
- |
15000 |
|
Extra for IS 303 : 2024 |
| Cl-6.5(Cross-bands and face veneers) |
- |
1000 |
|
Extra for cross band & Face veneers |
| Cl-6.6(Adhesives) |
- |
8000 |
|
Extra for IS 848 |
| Cl-7(Construction) |
- |
1000 |
|
- |
| Cl-8(Fittings) |
- |
100 |
|
- |
|
18 Dec, 2027 |
-
Included w.e.f.17.09.2025 |
| 4209 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 1659 (2004) |
Block boards - Specification (Fourth Revision) |
- |
6500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.2.6(Spot test - Annexure L) |
- |
500 |
|
- |
| 9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K) |
- |
1000 |
|
- |
| 9.2.5(Modulus of elasticity - AVERAGE - Annexure K) |
- |
0 |
|
- |
| 9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K) |
- |
1000 |
|
- |
| 9.2.5(Modulus of rupture - AVERAGE - Annexure K) |
- |
0 |
|
- |
| 9.2.4(Mycological Test [for MR grade only] - Annexure J) |
- |
3000 |
|
- |
| 9.2.3(Adhesion of Plies - Annexure H) |
- |
1000 |
|
- |
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade]) |
- |
1000 |
|
- |
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade]) |
- |
0 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F) |
- |
1000 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F) |
- |
0 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F) |
- |
0 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F) |
- |
0 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F) |
- |
0 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F) |
- |
0 |
|
- |
| 7.3(Dimensional Requirements - Variation in thickness - Annexure E) |
- |
100 |
|
- |
| 7.3(Dimensional Requirements - Squareness - Annexure D) |
- |
100 |
|
- |
| 7.3(Dimensional Requirements - Edge Straightness - Annexure D) |
- |
100 |
|
- |
| 7.3(Dimensional Requirements - Thickness - Annexure E) |
- |
100 |
|
- |
| 7.3(Dimensional Requirements - Width - 8.1.4) |
- |
100 |
|
- |
| 7.3(Dimensional Requirements - Length - 8.1.4) |
- |
100 |
|
- |
| 8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type]) |
- |
100 |
|
- |
| 8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type]) |
- |
100 |
|
- |
| 9.2.6 (mechanical)(Spot test - Annexure L) |
- |
0 |
|
- |
| cl. 11(marking) |
- |
0 |
|
- |
| cl. 11.1(marking - BIS certification marking) |
- |
0 |
|
- |
| Cl-10(ADDITIONAL REQUIREMENTS FOR
ECO-MARK) |
- |
0 |
|
- |
| 6.2(Core- Moisture & Width) |
- |
500 |
|
- |
| 6.3(Cross Bands and Faces- Moisture content) |
- |
500 |
|
- |
| 6.3.1(Thickness of cross band and face veneers) |
- |
100 |
|
- |
| Cl-7.1(Thickness) |
- |
100 |
|
- |
| Cl-7.2(Sizes) |
- |
0 |
|
- |
|
18 Dec, 2027 |
-
Included w.e.f.17.09.2025 |
| 4210 |
THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura
| 9111924
| IS 302 : Part 2 : Sec 3 (2024) |
Household and Similar Electrical Appliances —Safety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General requirement) |
- |
100 |
|
- |
| Cl-7(Marking and instructions) |
- |
200 |
|
- |
| Cl-8(Protection against access to live parts) |
- |
1000 |
|
- |
| Cl-10(Power input and current) |
- |
1000 |
|
- |
| Cl-11(Heating) |
- |
1000 |
|
- |
| Cl-12(Charging of metal-ion batteries) |
- |
500 |
|
- |
| Cl-13(Leakage current and electric strength at operating temperature) |
- |
1000 |
|
- |
| Cl-14(Transient overvoltages) |
- |
500 |
|
- |
| Cl-15(Moisture resistance) |
- |
1000 |
|
- |
| Cl-16(Leakage current and electric strength) |
- |
1000 |
|
- |
| Cl-17(Overload protection of transformers and associated circuits) |
- |
300 |
|
- |
| Cl-18(Endurance) |
- |
0 |
|
- |
| Cl-19(Abnormal operation) |
- |
700 |
|
- |
| Cl-20(Stability and mechanical hazards) |
- |
500 |
|
- |
| Cl-21(Mechanical strength) |
- |
600 |
|
- |
| Cl-22(Construction) |
- |
500 |
|
- |
| Cl-23(Internal wiring) |
- |
700 |
|
- |
| Cl-24(Components) |
- |
600 |
|
- |
| Cl-25(Supply connection and external flexible cords) |
- |
600 |
|
- |
| Cl-26(Terminals for external conductors) |
- |
300 |
|
- |
| Cl-27(Provision for earthing) |
- |
1000 |
|
- |
| Cl-28(Screws and connections) |
- |
300 |
|
- |
| Cl-29(Clearances, creepage distances and solid insulation) |
- |
700 |
|
- |
| Cl-30(Resistance to heat and fire) |
- |
700 |
|
- |
| Cl-31(Resistance to rusting) |
- |
200 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f. 26.09.2025
Exclusion: Cl-32 (Radiation, toxicity and similar hazards), Cl-19 (Abnormal operation) |
| 4211 |
DELHI TEST HOUSE (50) KUNDLI SONIPAT
| 9127026
| IS 16822 (2019) |
Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Secondary lithium cells and batteries for use in industrial applications |
-- |
500000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Marking and Designation) |
- |
5000 |
|
- |
| 6, 6.1, 6.2(Charging Procedures For Test Purposes) |
- |
25000 |
|
- |
| 6.3, 6.3.1(Discharge Performance, Discharge Performance at +25°C) |
- |
50000 |
|
- |
| 6.3.2(Discharge performance at Low Temperature) |
- |
50000 |
|
- |
| 6.3.3(High Rate Permissible Current) |
- |
50000 |
|
- |
| 6.4(Charge (Capacity) Retention and Recovery) |
- |
70000 |
|
- |
| 6.5(Cell and Battery Internal Resistance) |
- |
50000 |
|
- |
| 6.6(Endurance) |
- |
200000 |
|
- |
|
23 Jun, 2028 |
-
Included w.e.f. 29.09.2025 |
| 4212 |
AJEO TESTING LABS PVT LTD, GHAZIABAD
| 8178606
| IS 3589 (2001) |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
ALL |
7500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
200 |
|
- |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
200 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Phosphorus Content IS 228) |
- |
200 |
|
- |
| 8.1 Table 2 Table 3(Sulphur Content IS 228) |
- |
200 |
|
- |
| 9.3(Guided bend test(For SAW Pipes)) |
- |
500 |
|
- |
| 10(Hydaulic pressure test) |
- |
3000 |
|
- |
| 11.1, Table 5.(Outside Diameter (OD)) |
- |
200 |
|
- |
| 11.1, Table 5.(Thickness) |
- |
200 |
|
- |
| 11.1, Table 5.(Mass) |
- |
200 |
|
- |
| 12.3.3(Ovality) |
- |
200 |
|
- |
| 12.5(Strightness) |
- |
200 |
|
- |
| 14.1(Visual inspection, Appearance and Workmanship) |
- |
200 |
|
- |
| 14.2(Visual inspection, Appearance and Workmanship) |
- |
0 |
|
- |
| 14.3(Visual inspection, Appearance and Workmanship) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD)) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD)) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Length) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Length) |
- |
0 |
|
- |
| 8.1(CE) |
- |
0 |
|
- |
| 8.1(CE) |
- |
0 |
|
- |
| 8.1(CE) |
- |
0 |
|
- |
| 9.3(Guided Bend Test
(for SAW Pipes)) |
- |
0 |
|
- |
| 9.2.3(Flattening Test for
seamless pipes) |
- |
500 |
|
- |
| 9.2.1(Flattening test for
ERW pipes ) |
- |
0 |
|
- |
| 9.1(Tensile test-Yield Strength) |
- |
1000 |
|
- |
| 9.1(Tensile test-Strength) |
- |
500 |
|
- |
| 9.1(Tensile test- Elongation) |
- |
500 |
|
- |
| 18(Marking) |
- |
0 |
|
- |
| 18(Marking) |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"("1.Outer dia (04)
2.Thickness (08)
3.Ovality (08)") |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"(Avarage Outer dia (04)) |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"(Avarage Thickness (08)) |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"(Maximum Ovality (08)) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Phosphorus Content IS 228) |
- |
0 |
|
- |
| 8.1 Table 2 Table 3(Sulphur Content IS 228) |
- |
0 |
|
- |
| 9.3(Guided bend test(For SAW Pipes)) |
- |
0 |
|
- |
| 10(Hydaulic pressure test) |
- |
0 |
|
- |
| 11.1, Table 5.(Outside Diameter (OD)) |
- |
0 |
|
- |
| 11.1, Table 5.(Thickness) |
- |
0 |
|
- |
| 11.1, Table 5.(Mass) |
- |
0 |
|
- |
| 12.3.3(Ovality) |
- |
0 |
|
- |
| 12.5(Strightness) |
- |
0 |
|
- |
| 14.1(Visual inspection, Appearance and Workmanship) |
- |
0 |
|
- |
| 14.2(Visual inspection, Appearance and Workmanship) |
- |
0 |
|
- |
| 14.3(Visual inspection, Appearance and Workmanship) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD)) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD)) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Length) |
- |
0 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Length) |
- |
0 |
|
- |
| 8.1(CE) |
- |
0 |
|
- |
| 8.1(CE) |
- |
0 |
|
- |
| 8.1(CE) |
- |
0 |
|
- |
| 18(Marking) |
- |
0 |
|
- |
| 18(Marking) |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"("1.Outer dia (04)
2.Thickness (08)
3.Ovality (08)") |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"(Avarage Outer dia (04)) |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"(Avarage Thickness (08)) |
- |
0 |
|
- |
| "11.1, Table 5. 12.3.3"(Maximum Ovality (08)) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 15.10.2025 |
| 4213 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 2185 : Part 3 (1984) |
Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8(Physical requirments) |
- |
5000 |
|
For dimensional and other qualitative test |
| 8.2(Physical requirments-Dimensions-Length) |
- |
5000 |
|
For dimensional and other qualitative test |
| 8.2(Physical requirments-Dimensions-Height) |
- |
5000 |
|
For dimensional and other qualitative test |
| 8.2(Physical requirments-Dimensions-Width) |
- |
5000 |
|
For dimensional and other qualitative test |
| 8.3(Physical requirments- Block density) |
- |
3000 |
|
For block density test |
| 8.4(Physical requirments- Compressive strength) |
- |
7500 |
|
For compressive strength test |
| 8.5(Thermal Conductivity) |
- |
5000 |
|
For thermal conductivity test |
| 8.6( Drying Shrinkage ) |
- |
5000 |
|
For drying shrinkage test |
| 8.4, 9.2 & 11.3(Indivisual Moisture Content) |
- |
4000 |
|
For moisture constent test |
| 8.4, 9.2 & 11.3(Indivisual Bulk density) |
- |
5000 |
|
For dimensional and other qualitative test |
| 8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength) |
- |
7500 |
|
For compressive strength test |
| 8.3 & 9.1(Indivisual Moisture Content) |
- |
4000.02 |
|
For moisture constent test |
| 8.3 & 9.1 Table 1(Indivisual Block Density) |
- |
2999.98 |
|
For block density test |
| 3.2 & 8.2(Indivisual Height) |
- |
5000 |
|
For dimensional and other qualitative test |
| 3.2 & 8.2(Indivisual Width) |
- |
4999.98 |
|
For dimensional and other qualitative test |
| 3.2 & 8.2(Indivisual Length) |
- |
5000 |
|
For dimensional and other qualitative test |
| 8.6, 9.4 & 11.5(Grade) |
- |
4999.98 |
|
For dimensional and other qualitative test |
| 3.4(Special Faces) |
- |
4999.98 |
|
For dimensional and other qualitative test |
| 3.3(Faces & Arises) |
- |
4999.98 |
|
For dimensional and other qualitative test |
| 3.1(Shape) |
- |
5000 |
|
For dimensional and other qualitative test |
| 8.1.1(General (Exposed wall construction)) |
- |
5000.01 |
|
For dimensional and other qualitative test |
| 5(MATERIALS) |
- |
5000.03 |
|
For dimensional and other qualitative test |
| 7(SURFACE TEXTURE AND FINISH) |
- |
5000 |
|
For dimensional and other qualitative test |
| 9.3(Thermal Conductivity) |
- |
5000.03 |
|
For thermal conductivity test |
| 15(Marking) |
- |
5000.03 |
|
For dimensional and other qualitative test |
|
- |
-
- |
| 4214 |
Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)
| 8139626
| IS 18375 : Part 1 (2023) |
Medical Suction Equipment Part 1 Electrically Powered Suction Equipment |
- |
850000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General requirements) |
- |
0 |
|
- |
| Cl-5(Materials) |
- |
0 |
|
- |
| Cl-6.1(General.) |
- |
0 |
|
- |
| Cl-6.2(Protection against ingress of solid objects and liquids) |
- |
0 |
|
- |
| Cl-6.3(Battery powered suction equipment) |
- |
0 |
|
- |
| Cl-7.1(General- Performance requirements) |
- |
0 |
|
- |
| Cl-7.2(Effect of an interruption of power supply on the vacuum level and free air flow) |
- |
0 |
|
- |
| Cl-8("Additional/alternative requirements for suction equipment and suction tubing
designed for field use or transport use") |
- |
0 |
|
- |
|
05 Apr, 2027 |
-
Included w.e.f 15.10.2025
Exclusion: Cl-6.1 (General.) |
| 4215 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 7283 (1992) |
Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision) |
- |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000 |
|
For mechanical test |
| Cl 9(Inclusion) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical test |
| Cl 11(Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000 |
|
For mechanical test |
| Cl 9(Inclusion) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical test |
| Cl 11(Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000.01 |
|
For mechanical test |
| Cl 9(Inclusion) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical test |
| Cl 11(Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000 |
|
For mechanical tests |
| Cl 9(Inclusion) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical tests |
| Cl 11(Size) |
- |
2999.99 |
|
For dimensional and other qualitative tests |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000 |
|
For mechanical tests |
| Cl 9(Inclusion) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical tests |
| Cl 11(Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000 |
|
For mechanical tests |
| Cl 9(Inclusion) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical tests |
| Cl 11(Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 5(Material Test) |
- |
3000 |
|
For dimensional and other qualitative tests |
| 5, 5.1, 5.2(Chemical Composition - Carbon) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chemical Composition - Sulphur) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chemical Composition - Phosphorus) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chemical Composition - Manganese) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chemical Composition - Silicon) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chemical Composition - Nickel) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Copper) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chromium) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chemical Composition - Lead) |
- |
4000 |
|
For complete chemical tests |
| 5, 5.1, 5.2(Chemical Composition - Nitrogen) |
- |
4000 |
|
For complete chemical tests |
| Cl 11(Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical tests |
| Cl 9(Inclusion) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000 |
|
For mechanical tests |
| Cl 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| 11(Grain Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 6(Workmanship) |
- |
3000 |
|
For dimensional and other qualitative tests |
| 7(Diameter & Out Of Round) |
- |
3000 |
|
For dimensional and other qualitative tests |
| Cl 8(Decarburization) |
- |
4000 |
|
For mechanical tests |
| Cl 9(Inclusion) |
- |
3000.01 |
|
For dimensional and other qualitative tests |
| Cl 10(Hardenability) |
- |
4000 |
|
For mechanical tests |
| Cl 11(Size) |
- |
3000 |
|
For dimensional and other qualitative tests |
| 14(Marking) |
- |
3000 |
|
For dimensional and other qualitative tests |
| 14(Marking) |
- |
3000.01 |
|
For dimensional and other qualitative tests |
| 14(Marking) |
- |
3000.01 |
|
For dimensional and other qualitative tests |
| 14(Marking) |
- |
3000 |
|
For dimensional and other qualitative tests |
| 5(Material - IS 7283) |
- |
3000 |
|
For dimensional and other qualitative tests |
| 7.3(Dimensional Cutting -IS 7283) |
- |
3000 |
|
For dimensional and other qualitative tests |
|
- |
-
Included w.e.f 16.09.2025 |
| 4216 |
Samridhi Test House Pvt. Ltd.
| 8184706
| IS 15559 (2004) |
Polyester strapping - Specification |
All Grade / Type / Size / Designation |
5300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Manufacture) |
- |
500 |
|
- |
| 4.1(Manufacture) |
- |
500 |
|
- |
| 4.2(Surface finish) |
- |
250 |
|
- |
| 4.3(Colour) |
- |
250 |
|
- |
| 4.4(Intrinsic Viscosity) |
- |
700 |
|
- |
| 4.5(Freedom from Defects) |
- |
200 |
|
- |
| 4.6, Table-1(Dimensions and Physical Properties) |
- |
300 |
|
- |
| 4.7(Tolerance on Width and Thickness) |
- |
300 |
|
- |
| 5.1, Table-2(Tensile Strength and Elongation) |
- |
300 |
|
- |
| 5.2(Split Resistance) |
- |
450 |
|
- |
| 5.3, Table-3(Camber) |
- |
250 |
|
- |
| Table-1 (2)(Nominal width of strapping) |
- |
200 |
|
- |
| Table-1 (3)(Nominal thickness of strapping) |
- |
200 |
|
- |
| Table-1 (4)(Type) |
- |
100 |
|
- |
| Table-1 (5)(Breaking strength, Min) |
- |
200 |
|
- |
| Table-2 (2)(Tensile strength, kg/mm2) |
- |
200 |
|
- |
| Table-2 (3)(Elongation, %) |
- |
300 |
|
- |
| Table-2 (4)(Type) |
- |
200 |
|
- |
| Table-3 (2)(Camber- Nominal width (mm)) |
- |
200 |
|
- |
| Table-3 (3)(Camber, Max (mm)) |
- |
200 |
|
- |
| 4.1(Manufacture) |
- |
0 |
|
- |
| 4.1(Manufacture) |
- |
0 |
|
- |
| 4.2(Surface finish) |
- |
0 |
|
- |
| 4.3(Colour) |
- |
0 |
|
- |
| 4.4(Intrinsic Viscosity) |
- |
0 |
|
- |
| 4.5(Freedom from Defects) |
- |
0 |
|
- |
| 4.6, Table-1(Dimensions and Physical Properties) |
- |
0 |
|
- |
| 4.7(Tolerance on Width and Thickness) |
- |
0 |
|
- |
| 5.1, Table-2(Tensile Strength and Elongation) |
- |
0 |
|
- |
| 5.2(Split Resistance) |
- |
0 |
|
- |
| 5.3, Table-3(Camber) |
- |
0 |
|
- |
| Table-1 (2)(Nominal width of strapping) |
- |
0 |
|
- |
| Table-1 (3)(Nominal thickness of strapping) |
- |
0 |
|
- |
| Table-1 (4)(Type) |
- |
0 |
|
- |
| Table-1 (5)(Breaking strength, Min) |
- |
0 |
|
- |
| Table-1 (5)(Breaking strength, Min) |
- |
0 |
|
- |
| Table-2 (2)(Tensile strength, kg/mm2) |
- |
0 |
|
- |
| Table-2 (2)(Tensile strength, kg/mm2) |
- |
0 |
|
- |
| Table-2 (3)(Elongation, %) |
- |
0 |
|
- |
| Table-2 (3)(Elongation, %) |
- |
0 |
|
- |
| Table-2 (4)(Type) |
- |
0 |
|
- |
| Table-2 (4)(Type) |
- |
0 |
|
- |
| Table-3 (2)(Camber- Nominal width (mm)) |
- |
0 |
|
- |
| Table-3 (2)(Camber- Nominal width (mm)) |
- |
0 |
|
- |
| Table-3 (3)(Camber, Max (mm)) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 14.10.2025 |
| 4217 |
POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA
| 8170206
| IS 17017 : Part 2 : Sec 1 (2020) |
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements |
ALL |
224200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(General Requirements) |
- |
700 |
|
- |
| 4.2(General Notes on Tests) |
- |
0 |
|
- |
| 5(RATINGS) |
- |
700 |
|
- |
| 6 Table. No. 1 ,2 , 3and 4 (CONNECTION BETWEEN THE POWER SUPPLY AND THE ELECTRIC VEHICLE) |
- |
700 |
|
- |
| 7(CLASSIFICATION OF ACCESSORIES) |
- |
700 |
|
- |
| 8(MARKING) |
- |
700 |
|
- |
| 9(DIMENSIONS) |
- |
4900 |
|
- |
| 10(PROTECTION AGAINST ELECTRIC SHOCK) |
- |
6300 |
|
- |
| 11, Table no. 6(SIZE AND COLOUR OF PROTECTIVE EARTHING CONDUCTORS) |
- |
700 |
|
- |
| 12, Table no. 5(PROVISIONS FOR PROTECTIVE EARTHING) |
- |
10500 |
|
- |
| 13, Table no. 6and 7(TERMINALS) |
- |
11500 |
|
- |
| 14, Tabke no. 8 and 9(INTERLOCKS) |
- |
7000 |
|
- |
| 15(RESISTANCE TO AGEING OF RUBBER AND THERMOPLASTIC MATERIAL) |
- |
7000 |
|
- |
| 16, Table no. 10(GENERAL CONSTRUCTION) |
- |
700 |
|
- |
| 17, table 11,12and 13(CONSTRUCTION OF SOCKET-OUTLETS) |
- |
6500 |
|
- |
| 18(CONSTRUCTION OF PLUGS AND VEHICLE CONNECTORS) |
- |
700 |
|
- |
| 19(CONSTRUCTION OF VEHICLE INLETS) |
- |
700 |
|
- |
| 20(DEGREES OF PROTECTION) |
- |
16500 |
|
- |
| 21, Table no. 14(IN+I33SULATION RESISTANCE AND DIELECTRIC STRENGTH) |
- |
11000 |
|
- |
| 22, Table no. 15(BREAKING CAPACITY) |
- |
35700 |
|
- |
| 23, Table no. 16(NORMAL OPERATION) |
- |
42000 |
|
- |
| 24, Table no. 17(TEMPERATURE RISE) |
- |
21700 |
|
- |
| 25, Table no. 18(FLEXIBLE CABLES AND THEIR CONNECTION) |
- |
7500 |
|
- |
| 26, Table no.19, 20,21,22(MECHANICAL STRENGTH) |
- |
7500 |
|
- |
| 27(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS) |
- |
6300 |
|
- |
| 28(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES) |
- |
4500 |
|
- |
| 29(RESISTANCE TO HEAT, TO FIRE AND TO TRACKING) |
- |
11500 |
|
- |
|
11 Apr, 2028 |
-
Included w.e.f 29.09.2025 |
| 4218 |
BIS, Central Laboratory (CL)
| None
| IS 12492 (2025) |
Thermoplastics Hoses (Textile Reinforced) for Compressed Air — Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-6 (Materials and construction) |
- |
|
|
|
| Cl-7.1, Table-1 (Inside diameter) |
- |
|
|
|
| Cl-7.1, Table-1 (Tolerance) |
- |
|
|
|
| Cl-7.1, Table-1 (Minimum wall thickness- Type A) |
- |
|
|
|
| Cl-7.1, Table-1 (Minimum wall thickness- Type B) |
- |
|
|
|
| Cl-7.1, Table-1 (Minimum wall thickness- Type C) |
- |
|
|
|
| Cl-7.1, Table-1 (Minimum wall thickness- Type D) |
- |
|
|
|
| Cl-7.2 (Concentricity) |
- |
|
|
|
| Cl-7.3 (Tolerances on length) |
- |
|
|
|
| Cl-8.1.1 (Tensile strength and elongation at break of lining and cover) |
- |
|
|
|
| Cl-8.1.2 (Resistance to ageing) |
- |
|
|
|
| Cl-8.1.3 (Loss in mass on heating) |
- |
|
|
|
| Cl-8.2.1 (Hydrostatic requirements) |
- |
|
|
|
|
- |
-
Excluding Resistance to Liquids, Performance Test- Cold bend radius |
| 4219 |
Atckon Laboratories LLP, Bahadurgarh
| 8186436
| IS 848 (2025) |
Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision ) |
- |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| As per Clause 4 Table 1(TYPES) |
- |
8500 |
|
- |
| As per Clause 6.6(SETTING TIMES AND CONDITIONS) |
- |
8500 |
|
- |
| As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type) |
- |
8500 |
|
- |
| As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type) |
- |
8500 |
|
- |
| As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type) |
- |
8500 |
|
- |
| As per Clause 7.4(Acidity And Alkalinity (pH)) |
- |
8500 |
|
- |
| As per Clause 9(Marking) |
- |
8500 |
|
- |
|
- |
-
Included w.e.f.12.09.2025 |
| 4220 |
INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED
| 8188026
| IS 16221 : Part 2 (2015) |
Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters |
- |
200000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
100000 |
|
- |
| 5(Marking and documentation) |
- |
20000 |
|
- |
| 6(Environmental requirements and conditions) |
- |
10000 |
|
- |
| 7(Protection against electric shock and energy hazards) |
- |
10000 |
|
- |
| 8(Protection against Mechanical Hazards) |
- |
10000 |
|
- |
| 9(Protection against Fire Hazards) |
- |
10000 |
|
- |
| 10(Protection against Sonic Pressure Hazards) |
- |
20000 |
|
- |
| 11(Protection against Liquid Hazards) |
- |
20000 |
|
- |
| 12(Protection against Chemical Hazards) |
- |
21000 |
|
- |
| 13(Physical Requirements) |
- |
25000 |
|
- |
| 14(Components) |
- |
22000 |
|
- |
| 14(Components) |
- |
15000 |
|
- |
| 9.1.4.3(Hot flaming oil test) |
- |
20000 |
|
- |
| Clause No. 4.3(Thermal testing) |
- |
50000 |
|
- |
| Clause No. 4.4(Testing in single fault condition) |
- |
20000 |
|
- |
| 4.5(Humidity preconditioning) |
- |
20000 |
|
- |
| 4.6(Backfeed voltage protection) |
- |
10000 |
|
- |
| 4.7(Electrical rating tests) |
- |
10000 |
|
- |
| 4.8(Additional tests for grid interactive inverters) |
- |
20000 |
|
- |
| 4(General Test Requirements) |
- |
25000 |
|
- |
| 5(Marking and documentation) |
- |
15000 |
|
- |
| 6(Environmental requirements and conditions) |
- |
12000 |
|
- |
| 7(Protection against electric shock and energy hazards) |
- |
15000 |
|
- |
| 8(Protection against Mechanical Hazards) |
- |
20000 |
|
- |
| 9(Protection against Fire Hazards) |
- |
10000 |
|
- |
| 10(Protection against Sonic Pressure Hazards) |
- |
10000 |
|
- |
| 11(Protection against Liquid Hazards) |
- |
10000 |
|
- |
| 12(Protection against Chemical Hazards) |
- |
10000 |
|
- |
| 13(Physical Requirements) |
- |
10000 |
|
- |
| 4.4.4.15.1(Fault-tolerance of residual current monitoring) |
- |
10000 |
|
- |
| 4.4.4.15.2(Fault-tolerance of automatic disconnecting means) |
- |
10000 |
|
- |
| 4.4.4.16(Stand-alone inverters – Load transfer test) |
- |
10000 |
|
- |
| 4.4.4.17(Cooling system failure – Blanketing test) |
- |
10000 |
|
- |
| 4.7.3(Measurement requirements for AC output ports for stand-alone inverters) |
- |
10000 |
|
- |
| 4.7.4(Stand-alone Inverter AC output voltage and frequency) |
- |
10000 |
|
- |
| 4.7.4.2(Steady state output voltage at nominal DC input) |
- |
10000 |
|
- |
| 4.7.4.3(Steady state output voltage across the DC input range) |
- |
10000 |
|
- |
| 4.7.4.4(Load step response of the output voltage at nominal DC input) |
- |
10000 |
|
- |
| 4.7.4.5(Steady state output frequency) |
- |
10000 |
|
- |
| 4.7.5(Stand-alone inverter output voltage waveform) |
- |
10000 |
|
- |
| 4.7.5.2(Sinusoidal output voltage waveform requirements) |
- |
10000 |
|
- |
| 4.7.5.3(Non-sinusoidal output waveform requirements) |
- |
10000 |
|
- |
| 4.7.5.5(Output voltage waveform requirements for inverters for dedicated loads) |
- |
10000 |
|
- |
| 4.8.2.1(Array insulation resistance detection for inverters for ungrounded arrays) |
- |
10000 |
|
- |
| 4.8.2.2(Array insulation resistance detection for inverters for functionally grounded arrays) |
- |
10000 |
|
- |
| 4.8.3.2(30 mA touch current type test for isolated inverters) |
- |
10000 |
|
- |
| 4,8.3.3(Fire hazard residual current type test for isolated inverters) |
- |
10000 |
|
- |
| 4.8.3.5(Protection by residual current monitoring) |
- |
10000 |
|
- |
| 7.3.10(Additional requirements for stand-alone inverters) |
- |
10000 |
|
- |
| 9.3.4(Inverter backfeed current onto the array) |
- |
10000 |
|
- |
| 13.9(Fault indication) |
- |
10000 |
|
- |
| Cl.13.6.1.1(Thermal index or capability) |
- |
10000 |
|
- |
| Cl.13.6.3.1(Resistance to arcing) |
- |
10000 |
|
- |
| 14(Components) |
- |
10000 |
|
- |
| Cl.14.8(Batteries) |
- |
10000 |
|
- |
|
- |
-
Included w.e.f.29.09.2025
Exclusion
13.6.4 (UV resistance)
Annex j (Ultravoilet light conditioning test)
Cl.15 (Software and firmware perfoming safety functions) |
| 4221 |
ATCC TEST LABS LLP
| 8172626
| IS 3315 (2024) |
Direct Evaporative Air Cooler — Specification (Fourth Revision) |
Direct Evaporative Air Cooler Specification (Fourth Revision) |
60000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1(Enclosure) |
- |
2000 |
|
- |
| Cl-5.2(Filter Pads) |
- |
2000 |
|
- |
| Cl-5.3(Sump Tank Capacities) |
- |
2000 |
|
- |
| Cl-5.4(Blower/Fan) |
- |
2000 |
|
- |
| Cl-5.4.3(Fan motor) |
- |
2000 |
|
- |
| Cl-5.5(Pump Set) |
- |
2000 |
|
- |
| Cl-5.6.1(Electrical wiring and connection) |
- |
2000 |
|
- |
| Cl-6(Rating Requirement) |
- |
2000 |
|
- |
| Cl-8.1(Performance Requirement) |
- |
5000 |
|
- |
| Cl-8.2(Sound Test) |
- |
2000 |
|
- |
| Cl-8.3(Air Delivery (Air Flow) Test) |
- |
6000 |
|
- |
| Cl-8.4(Cooling Efficiency Test) |
- |
6000 |
|
- |
| Cl-8.5(Power Consumption) |
- |
5000 |
|
- |
| Cl-8.6(EER Calculation Method) |
- |
5000 |
|
- |
| Cl-8.7(Drop Test) |
- |
2000 |
|
- |
| Cl-8.8(Air Cooler Blower/Fan Reliability Test) |
- |
3000 |
|
- |
| Cl-12.2.1(General Running Tests) |
- |
1000 |
|
- |
| Cl-12.2.2(Protection against Electric Shock) |
- |
1000 |
|
- |
| Cl-12.2.3(High Voltage Tests) |
- |
1000 |
|
- |
| Cl-12.2.4(Leakage Current) |
- |
1000 |
|
- |
| Cl-12.2.5(Provision for Earthing) |
- |
1000 |
|
- |
| Cl-12.2.6(Finish) |
- |
1000 |
|
- |
| Cl-13(Additional Requirement for ECO-Mark) |
- |
1000 |
|
- |
| Cl-14(Storage) |
- |
1000 |
|
- |
| Cl-5.6.2(Suitable power cable) |
- |
1000 |
|
- |
| Cl-5.7(Switches) |
- |
1000 |
|
- |
|
15 Jun, 2029 |
-
Included w.e.f 04.11.2025 |
| 4222 |
WELL TECH TEST AND RESEARCH CENTER, DERABASSI
| 9177306
| IS 3601 (2006) |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
TYPE AND GRADE AS PER TABLE 1, SIZE 25.4 -406.3 MM OD |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Material) |
- |
3000 |
|
- |
| 13(Mechanical Testing) |
- |
3000 |
|
- |
| 6.0(Workmanship) |
- |
1000 |
|
- |
| 4.1(Sulphur-Percentage by mass) |
- |
200 |
|
- |
| 4.1(Phosphorus-Percentage by mass) |
- |
200 |
|
- |
| 8.0(Straightness) |
- |
1000 |
|
- |
| 19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia) |
- |
1000 |
|
- |
| 19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness) |
- |
1000 |
|
- |
| 11.1(Surface Protection) |
- |
2500 |
|
- |
| 11.2(Surface Protection) |
- |
2500 |
|
- |
| 13.1.3(Tensile Strength) |
- |
2000 |
|
- |
| 13.1.1(Yield Stress) |
- |
2000 |
|
- |
| 13.1.2(Elongation) |
- |
2000 |
|
- |
| 13.2(Flattening Test) |
- |
200 |
|
- |
| 13.3(Bend Test (Strip)) |
- |
1000 |
|
- |
| 13.5(Drift Expansion Test) |
- |
1000 |
|
- |
| 13.6(Crush Test) |
- |
1000 |
|
- |
| 19.1.3(Height of Internal Fin) |
- |
1000 |
|
- |
| 6.0(Workmanship) |
- |
0 |
|
REPEAT |
| 4.1(Sulphur-Percentage by mass) |
- |
0 |
|
REPEAT |
| 4.1(Phosphorus-Percentage by mass) |
- |
0 |
|
REPEAT |
| 8.0(Straightness) |
- |
0 |
|
REPEAT |
| 19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia) |
- |
0 |
|
REPEAT |
| 19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness) |
- |
0 |
|
REPEAT |
| 11.1(Surface Protection) |
- |
0 |
|
REPEAT |
| 11.2(Surface Protection) |
- |
0 |
|
REPEAT |
| 13.1.3(Tensile Strength) |
- |
0 |
|
REPEAT |
| 13.1.1(Yield Stress) |
- |
0 |
|
REPEAT |
| 13.1.2(Elongation) |
- |
0 |
|
REPEAT |
| 13.2(Flattening Test) |
- |
0 |
|
REPEAT |
| 13.3(Bend Test (Strip)) |
- |
0 |
|
REPEAT |
| 13.5(Drift Expansion Test) |
- |
0 |
|
REPEAT |
| 13.6(Crush Test) |
- |
0 |
|
REPEAT |
| 19.1.3(Height of Internal Fin) |
- |
0 |
|
REPEAT |
| Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia) |
- |
0 |
|
REPEAT |
| Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration) |
- |
0 |
|
REPEAT |
| Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section) |
- |
0 |
|
REPEAT |
| Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section) |
- |
0 |
|
REPEAT |
| Cl. 19.1.3(Internal Fin Height) |
- |
0 |
|
REPEAT |
| Cl. 10 Annex B Cl. 17, Cl. 19(Mass) |
- |
0 |
|
REPEAT |
| Cl. 9(Length) |
- |
0 |
|
REPEAT |
| 4.0 (a)(Carbon as C - IS:8811) |
- |
0 |
|
REPEAT |
| 4.0 (b)(Manganese as Mn - IS:8811) |
- |
0 |
|
REPEAT |
| 4.0 (b)(Manganese as Mn - IS:8811) |
- |
0 |
|
REPEAT |
| 4.0 (c)(Micro Alloying elements (Nb+V+Ti)) |
- |
0 |
|
REPEAT |
| 4.0 (f)(Nitrogen content) |
- |
0 |
|
REPEAT |
| 9(Length -SOP MT-23) |
- |
0 |
|
REPEAT |
| 10(Outside diameter-SOP MT-23) |
- |
0 |
|
REPEAT |
| 10(Thickness - SOP MT-23) |
- |
0 |
|
REPEAT |
| 10(Mass of Tube-SOP MT-23) |
- |
0 |
|
REPEAT |
| 10(Area of Cross Section) |
- |
0 |
|
REPEAT |
| 16(Marking) |
- |
0 |
|
REPEAT |
| CL 10("1.Outer dia (04)
2.Thickness (08)") |
- |
0 |
|
REPEAT |
| CL 10(Minimum Outer dia (04)) |
- |
0 |
|
REPEAT |
| CL 10(Maximum Outer dia (04)) |
- |
0 |
|
REPEAT |
| Cl-10("
Minimum Thickness (08)") |
- |
0 |
|
REPEAT |
| CL 10(Maximum Thickness (08)) |
- |
0 |
|
REPEAT |
| 13.4(Bend Test (Whole Tube)) |
- |
0 |
|
REPEAT |
|
30 Mar, 2027 |
-
Included w.e.f. 22.09.2025
Exclusion: 13.4 (Bend Test (Whole Tube)) |
| 4223 |
Rajkot Metlab Services LLP, Rajkot
| 7183706
| IS 733 (1983) |
Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision) |
- |
8450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4(Freedom from Defects) |
- |
1500 |
|
- |
| Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816) |
- |
2500 |
|
- |
| Cl. 5.1, Table 2(Tensile Strength- IS 1816) |
- |
2500 |
|
- |
| Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length) |
- |
2500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method) |
- |
1500 |
|
- |
| 7(Dimension - IS 3965) |
- |
1500 |
|
- |
| 11(Marking) |
- |
150 |
|
- |
| Table-1, Clause - 5.1(Copper) |
- |
1500 |
|
- |
| Table-1, Clause - 5.1(Iron) |
- |
1500 |
|
- |
| Table-1, Clause - 5.1(Magnesium) |
- |
1500 |
|
- |
| Table-1, Clause - 5.1(Manganese) |
- |
1500 |
|
- |
| Table-1, Clause - 5.1(Titanium) |
- |
1500 |
|
- |
| Table-1, Clause - 5.1(Silicon) |
- |
1500 |
|
- |
| Table-1, Clause - 5.1(Chromium) |
- |
1500 |
|
- |
| Table-1, Clause - 5.1(Zinc) |
- |
1500 |
|
- |
|
12 Jan, 2028 |
-
Included w.e.f 06.01.2026 |
| 4224 |
Arihant Analytical Laboratory Pvt. Ltd., Sonipat
| 9167906
| IS 18297 (2023) |
Cabinet Hinges |
Level 1/ Level 2/ Level 3 |
23000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Type & Size) |
- |
23000 |
|
- |
| 4.1(Type (a) Full Overlay (Fig-1)) |
- |
23000 |
|
- |
| 4.2((b) Half Overlay (Fig-2)) |
- |
23000 |
|
- |
| 4.1((b) Half Overlay (Fig-2)) |
- |
23000 |
|
- |
| 4.1(c) Inset (Fig-2)) |
- |
23000 |
|
- |
| 4.2(Size (Fig-2)) |
- |
23000 |
|
- |
| 4.3(Manufacture & Purchaser) |
- |
23000 |
|
- |
| 5(Material (IS 18297)) |
- |
23000 |
|
- |
| 6 Table 1(Manufacture(IS: 18297)) |
- |
23000 |
|
- |
| 7.1(General Test Requirement (IS: 18297)) |
- |
23000 |
|
- |
| 7.1.1(Preparatory Measures (IS:18297)) |
- |
23000 |
|
- |
| 7.1.2(Limiting Deviations (IS:18297)) |
- |
23000 |
|
- |
| 7.1.3(Application of Force (IS: 18297)) |
- |
23000 |
|
- |
| 7.1.4(Sequence of Testing (IS 18297)) |
- |
23000 |
|
- |
| 7.1.5.1(Mass (IS:18297)) |
- |
23000 |
|
- |
| 7.1.5.2((i) Face withdrawal of Screws (IS: 2380 P-14)) |
- |
23000 |
|
- |
| 7.1.5.2((ii) Density (IS 2380 P-3)) |
- |
23000 |
|
- |
| 7.2(Over Load Test (IS 18297)) |
- |
23000 |
|
- |
| 7.2.1(Overload Test - Vertical Static overload test) |
- |
23000 |
|
- |
| 7.2.2(Overload Test - Horizontal Static overload test) |
- |
23000 |
|
- |
| Cabinet Hinges(Functional Test (IS: 18297)) |
- |
23000 |
|
- |
| Cabinet Hinges(Functional Test (IS: 18297)) |
- |
23000 |
|
- |
| 7.3.2(First Vertical Static Load test (IS 18297)) |
- |
23000 |
|
- |
| 7.3.3(First Horizontal Static Load test (IS 18297)) |
- |
23000 |
|
- |
| 7.3.4(Slam shut test (IS 18297)) |
- |
23000 |
|
- |
| 7.3.6(Durability Test (IS 18297)) |
- |
23000 |
|
- |
| 7.3.7(Deflection Test (IS 18297)) |
- |
23000 |
|
- |
| 7.3.8(Second Vertical Static Test (IS 18297)) |
- |
23000 |
|
- |
| 7.3.9(Second Horizontal Static Test (IS: 18297)) |
- |
23000 |
|
- |
| 7.4(Crrosion Resistance (IS 18297)) |
- |
23000 |
|
- |
| 7.5(Finish (IS: 18297)) |
- |
23000 |
|
- |
| 7.3.1(Operating Forces) |
- |
23000 |
|
- |
|
02 Jun, 2027 |
-
- |
| 4225 |
Arihant Analytical Laboratory Pvt. Ltd., Sonipat
| 9167906
| IS 17954 (2023) |
TELESCOPIC BALL BEARING DRAWER SLIDE SPECIFICATION |
- |
23000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.2, Table- 2 (i)(Internal channel) |
- |
23000 |
|
- |
| Cl-4.2, Table- 2 (ii)(Outer channel) |
- |
23000 |
|
- |
| Cl-4.2, Table- 2 (iii)(Track up to 550 mm) |
- |
23000 |
|
- |
| Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards) |
- |
23000 |
|
- |
| Cl-4.2, Table- 2 (v)(Ball cage) |
- |
23000 |
|
- |
| Cl-4.2, Table- 2 (vi)(Ball spacer) |
- |
23000 |
|
- |
| Cl-5(Components and Manufacture) |
- |
23000 |
|
- |
| Cl-5(Components and Manufacture) |
- |
23000 |
|
- |
| Cl-6.1(Preparatory Measures) |
- |
23000 |
|
- |
| Cl-6.2 (a)(Limiting Deviations- Force) |
- |
23000 |
|
- |
| Cl-6.2 (b)(Limiting Deviations- Speed) |
- |
23000 |
|
- |
| Cl-6.2 (c)(Limiting Deviations- Weights) |
- |
23000 |
|
- |
| Cl-6.2 (d)(Limiting Deviations- Dimension) |
- |
23000 |
|
- |
| Cl-6.3(Application of Forces) |
- |
23000 |
|
- |
| Cl-6.4(Testing Equipment) |
- |
23000 |
|
- |
| Cl-6.5(Sequence of testing) |
- |
23000 |
|
- |
| Cl-7(Vertical Load Test) |
- |
23000 |
|
- |
| Cl-8(Horizontal Load Test) |
- |
23000 |
|
- |
| Cl-9(Durability Test) |
- |
23000 |
|
- |
| Cl-10(Deflection Test) |
- |
23000 |
|
- |
| Cl-11(Slam Test) |
- |
23000 |
|
- |
| Cl-12(Finish) |
- |
23000 |
|
- |
| Cl-5.11(Ball) |
- |
23000 |
|
- |
| Cl-5.10(Rivets) |
- |
23000 |
|
- |
|
02 Jun, 2027 |
-
- |
| 4226 |
Arihant Analytical Laboratory Pvt. Ltd., Sonipat
| 9167906
| IS/ISO 22702 (2018) |
Utility lighters Safety specifications First Revision |
- |
20500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Flame generation) |
- |
20500 |
|
- |
| 4.2(Flame heights) |
- |
20500 |
|
- |
| 4.3(Flame- height adjustment) |
- |
20500 |
|
- |
| 4.4("Resistance to Spitting or
Sputtering and flaring") |
- |
20500 |
|
- |
| 4.5(Flame extinction) |
- |
20500 |
|
- |
| 4.6(Volumetric Displacement) |
- |
20500 |
|
- |
| 5.2(Resistance to dropping) |
- |
20500 |
|
- |
| 5.3(Resistance to elevated temperature) |
- |
20500 |
|
- |
| 5.4(Burning behavior) |
- |
20500 |
|
- |
| 5.5(Resistance to continuous burn) |
- |
20500 |
|
- |
| 5.6(Resistance to cyclic burn) |
- |
20500 |
|
- |
| 5.7(External Finish) |
- |
20500 |
|
- |
| 5.8(Compatibility with fuel) |
- |
20500 |
|
- |
| 5.9(Resistance to internal pressure) |
- |
20500 |
|
- |
| 6(Refilling Test) |
- |
20500 |
|
- |
|
02 Jun, 2027 |
-
- |
| 4227 |
Arihant Analytical Laboratory Pvt. Ltd., Sonipat
| 9167906
| IS/ISO 9994 (2018) |
Lighters Safety specifications First Revision |
- |
18000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4(Flame Generation) |
- |
18000 |
|
- |
| Cl.4.2(Flame Height) |
- |
18000 |
|
- |
| Cl.4.3(Flame-Height adjustment) |
- |
18000 |
|
- |
| Cl.4.4(Resistance to spitting or sputtering and flaring) |
- |
18000 |
|
- |
| Cl.4.5(Flame Extinction) |
- |
18000 |
|
- |
| Cl.4.6(Volumetric displacement of Fuel) |
- |
18000 |
|
- |
| Cl.4.7(Mass of Fuel) |
- |
18000 |
|
- |
| Cl.5.1(External Finish) |
- |
18000 |
|
- |
| Cl.5.2(Compatibility of Fuel) |
- |
18000 |
|
- |
| Cl.5.3(Resistance to Fuel Loss) |
- |
18000 |
|
- |
| Cl.5.4(Resistance to dropping) |
- |
18000 |
|
- |
| Cl.5.5(Resistance to elevated Temperature) |
- |
18000 |
|
- |
| Cl.5.6(Resistance to internal Pressure) |
- |
18000 |
|
- |
| Cl.5.7(Burning Behavior) |
- |
18000 |
|
- |
| Cl.5.8(Resistance to cyclic burning) |
- |
18000 |
|
- |
| Cl.5.9(Resistance to Continue Burning) |
- |
18000 |
|
- |
| 6.6, 6.6.3.1(Refilling test-IS/ISO 9994) |
- |
18000 |
|
- |
| 6.6, 6.6.3.2(Refilling test-IS/ISO 9994) |
- |
18000 |
|
- |
|
02 Jun, 2027 |
-
- |
| 4228 |
Arihant Analytical Laboratory Pvt. Ltd., Sonipat
| 9167906
| IS 4246 (2002) |
Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision) |
- |
14000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.24(Annexure E)(on no account the carbon monoxidel
carbon dioxide ratio of the exhaust gases of any burner.
operating at any consumption at which the burner is
stable at gas inlet pressure from 2452 kN/m2 to
3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.) |
- |
14000 |
|
- |
| Cl.23(There shall be no extinction of the flames on any
of the burners operating at maximum consumption
when the appliance is placed in a general (not
localized) current of air with a velocity of 2 m/s, as
measured with a rotating vane anemometer. The
location of the appliance relative to neighboring walls
and the direction of the draught shall be varied to
correspond to likely conditions of appliance installation.
This applies for all pressures from 2452 kN/m2 to
3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).) |
- |
14000 |
|
- |
| 24 (Annex - E)(Combustion (CO and CO2 ratio)) |
- |
14000 |
|
- |
| 4.1(Requirement) |
- |
14000 |
|
- |
| 5(Materials) |
- |
14000 |
|
- |
| 6(Design for Maintenance) |
- |
14000 |
|
- |
| 7(Rigidity and Stability) |
- |
14000 |
|
- |
| 8(Workmanship and Finish) |
- |
14000 |
|
- |
| 9(Gas Taps) |
- |
14000 |
|
- |
| 10(Injector Jets) |
- |
14000 |
|
- |
| 11(Burners) |
- |
14000 |
|
- |
| 12(Burner Pan Supports) |
- |
14000 |
|
- |
| 13.1(Gas Soundness) |
- |
14000 |
|
- |
| 13.2(Gas Leak Detector) |
- |
14000 |
|
- |
| 14(Gas Inlet Connections) |
- |
14000 |
|
- |
| 15(Strength and Rigidity) |
- |
14000 |
|
- |
| 16(General Conditions of Test) |
- |
14000 |
|
- |
| 17.1.1(Gas Consumption) |
- |
14000 |
|
- |
| 18(Ignition and Flame Travel) |
- |
14000 |
|
- |
| 19(Flame Stability) |
- |
14000 |
|
- |
| 20(Noise Control) |
- |
14000 |
|
- |
| 21(Flash Back) |
- |
14000 |
|
- |
| 22(Formation of Soot) |
- |
14000 |
|
- |
| 23(Resistance to Draught) |
- |
14000 |
|
- |
| 24(Combustion) |
- |
14000 |
|
- |
| 25(Fire Hazard and Limiting Temperature) |
- |
14000 |
|
- |
| 26(Thermal Efficiency) |
- |
14000 |
|
- |
| 27.1(Type Tests) |
- |
14000 |
|
- |
| 27.2(Routine Tests) |
- |
14000 |
|
- |
| 29(Marking) |
- |
14000 |
|
- |
| 30(Packing) |
- |
14000 |
|
- |
|
02 Jun, 2027 |
-
- |
| 4229 |
Arihant Analytical Laboratory Pvt. Ltd., Sonipat
| 9167906
| IS 13983 (1994) |
Stainless Steel Sinks For Domestic Purposes |
- |
18500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9(Marking) |
- |
500 |
|
- |
| 4(Type) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content) |
- |
800 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content) |
- |
800 |
|
- |
| 6(Thickness of sheet/strip) |
- |
500 |
|
- |
| 6(Depth of bowl) |
- |
500 |
|
- |
| 6(Internal dimensions of the bowl) |
- |
500 |
|
- |
| 6(Bowl locating limits) |
- |
500 |
|
- |
| 6(Co-ordinating sizes) |
- |
500 |
|
- |
| 7.1(Consruction and workmanship) |
- |
500 |
|
- |
| 7.1.1(Consruction and workmanship) |
- |
500 |
|
- |
| 7.2(Consruction and workmanship) |
- |
500 |
|
- |
| 7.2.1(Consruction and workmanship) |
- |
500 |
|
- |
| 7.3(Drainers) |
- |
500 |
|
- |
| 7.4(Waste outlet) |
- |
500 |
|
- |
| 7.5(Tap holes) |
- |
200 |
|
- |
| 7.6(Overflows) |
- |
200 |
|
- |
| 8(Finish) |
- |
300 |
|
- |
| 5(MATERIALS) |
- |
11000 |
|
- |
| 6.1.1(Thickness of Sheet/Strip) |
- |
500 |
|
- |
| 6.1.2(Thickness of Sheet/Strip) |
- |
500 |
|
- |
| 6.2(Depth of Bowls) |
- |
500 |
|
- |
| 6.3(Internal Dimensions of Bowls) |
- |
500 |
|
- |
| 6.4.1(Bowl Locating Limits) |
- |
500 |
|
- |
| 6.5(Coordinating Sizes) |
- |
500 |
|
- |
| 7.1(CONSTRUCTION AND WORKMANSHIP) |
- |
500 |
|
- |
| 7.1.1(CONSTRUCTION AND WORKMANSHIP) |
- |
500 |
|
- |
| 7.2.1(CONSTRUCTION AND WORKMANSHIP) |
- |
500 |
|
- |
| 7.3(CONSTRUCTION AND WORKMANSHIP) |
- |
500 |
|
- |
| 7.4(Waste Outlet) |
- |
500 |
|
- |
| 7.5(Tap Holes) |
- |
200 |
|
- |
| 7.6(OVERFLOW) |
- |
200 |
|
- |
| Clause no. 4(types) |
- |
500 |
|
- |
| Caluse no. 5("Material -Austenitic stainless steel of
Grade Designation") |
- |
500 |
|
- |
| Clause no. 6.1(Thickness of sheet) |
- |
500 |
|
- |
| Clause no. 6.2(Depth of Bowls) |
- |
500 |
|
- |
| Clause no. 6.3(Internal dimensions of bowls) |
- |
500 |
|
- |
| Clause no. 6.4(Bowl Locating Limits) |
- |
500 |
|
- |
| Clause no. 6.5, Table No. 1(Dimension of the sink) |
- |
500 |
|
- |
| Clause no. 7(Construction and workmanship) |
- |
500 |
|
- |
| Clause no. 8(Finish) |
- |
300 |
|
- |
| Clause no. 9(Mark) |
- |
500 |
|
- |
|
02 Jun, 2027 |
-
- |
| 4230 |
Arihant Analytical Laboratory Pvt. Ltd., Sonipat
| 9167906
| IS 15833 (2009) |
Stainless Steel Tower Bolts -specification |
All Type |
5000.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.2(Carbon Content) |
- |
5000.00 |
|
- |
| Clause 4.2(Silicon) |
- |
5000.00 |
|
- |
| Clause 4.2(Manganese) |
- |
5000.00 |
|
- |
| Clause 4.2(nickel) |
- |
5000.00 |
|
- |
| Clause 4.2(Chromium) |
- |
5000.00 |
|
- |
| Clause 4.2(Sulphur) |
- |
5000.00 |
|
- |
| Clause 4.2(Phosphorus) |
- |
5000.00 |
|
- |
| Clause 4.2(Carbon Content) |
- |
5000.00 |
|
- |
| Clause 4.2(Silicon) |
- |
5000.00 |
|
- |
| Clause 4.2(Manganese) |
- |
5000.00 |
|
- |
| Clause 4.2(nickel) |
- |
5000.00 |
|
- |
| Clause 4.2(Chromium) |
- |
5000.00 |
|
- |
| Clause 4.2(Sulphur) |
- |
5000.00 |
|
- |
| Clause 4.2(Phosphorus) |
- |
5000.00 |
|
- |
| Clause 4.2(Mech)(Phosphorus) |
- |
5000.00 |
|
- |
| Clause 4.2(Mech)(Sulphur) |
- |
5000.00 |
|
- |
| Clause 4.2(Mech)(Chromium) |
- |
5000.00 |
|
- |
| Clause 4.2(Mech)(nickel) |
- |
5000.00 |
|
- |
| Clause 4.2(Mech)(Manganese) |
- |
5000.00 |
|
- |
| Clause 4.2(Mech)(Silicon) |
- |
5000.00 |
|
- |
| Clause 4.2(Mech)(Carbon Content) |
- |
5000.00 |
|
- |
| Cl 7(0) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 6(DIMENSIONS) |
- |
5000.00 |
|
- |
| Cl 5(MANUFACTURE) |
- |
5000.00 |
|
- |
| Cl 4(MATERIAL) |
- |
5000.00 |
|
- |
| Cl 3(NOMINAL SIZES) |
- |
5000.00 |
|
- |
| Cl 3(NOMINAL SIZES) |
- |
5000.00 |
|
- |
| 8(Marking) |
- |
5000.00 |
|
- |
|
02 Jun, 2027 |
-
- |
