BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4231

Robust Testing Solutions Private Limited, Alwar

8173526

IS 12444 (2020)

Copper Wire Rods for Electrical Applications — Specification ( First Revision )

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Dimension)	-	1000	-
6.2.2(Ovality)	-	2000	-
7.0(Freedom from Defects)	-	1000	-
8.1(Tensile Strength)	-	10000	-
8.2(Surface Compression Test)	-	10000	-
Cl-9.1, Table-4(Volume Resistivity)	-	5000	-
Cl-9.1, Table-4(Mass Resistivity)	-	5000	-
Cl-9.1, Table-4(Electrical Conductivity)	-	5000	-
9.2.1.1(Electrical Properties)	-	5000	-
9.2.1.2(Electrical Properties)	-	5000	-
9.2.1.3(Electrical Properties)	-	5000	-
13(Mechanical Strength)	-	5000	-
8.2.2(Calculated resistance)	-	5000	-
Cl-9.2.2(Electrical Properties)	-	5000	-
7.2(Surface Oxide)	-	5000	-
5.1 Table-1(Bi)	-	15000	-
5.1 Table-1(Pb)	-	15000	-
5.1 Table-1(Ag)	-	15000	-
5.1 Table-1(O)	-	20000	-
5.1 Table-1(Te)	-	15000	-
5.1 Table-1(Se)	-	15000	-
5.1 Table-1(Se+Te+Bi)	-	15000	-
5.1 Table-1(Sb)	-	15000	-
5.1 Table-1(As)	-	15000	-
5.1 Table-1(Sn)	-	15000	-
5.1 Table-1(Fe)	-	15000	-
5.1 Table-1(Ni)	-	15000	-
5.1 Table-1(S)	-	15000	-
5.1 Table-1(Maximum Allowable Total Impurities)	-	15000	-
10.5(Microscopic Examination)	-	5000	-
Cl-9.1, Table-4(Volume Resistivity)	-	5000	-
Cl-9.1, Table-4(Mass Resistivity)	-	5000	-
Cl-9.1, Table-4(Electrical Conductivity)	-	5000	-
9.2.1.1(Electrical Properties)	-	5000	-
9.2.1.2(Electrical Properties)	-	5000	-
9.2.1.3(Electrical Properties)	-	5000	-
13(Mechanical Strength)	-	5000	-
8.2.2(Calculated resistance)	-	5000	-
Cl-9.2.2(Electrical Properties)	-	5000	-
7.2(Surface Oxide)	-	5000	-
10.5(Microscopic Examination)	-	5000	-
Cl-9.1, Table-4(Volume Resistivity)	-	5000	-
Cl-9.1, Table-4(Mass Resistivity)	-	5000	-
Cl-9.1, Table-4(Electrical Conductivity)	-	5000	-
9.2.1.1(Electrical Properties)	-	5000	-
9.2.1.2(Electrical Properties)	-	5000	-
9.2.1.3(Electrical Properties)	-	5000	-
13(Mechanical Strength)	-	5000	-
8.2.2(Calculated resistance)	-	5000	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
10.5(Microscopic Examination)	-	0	-

02 Aug, 2029

-
Included w.e.f 28.07.2025

4232

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	6000	-
10.1(Power input)	-	6000	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	6000	-
13.3(Electric Strength at operating temperature)	-	6000	-
14(Transient Over Voltages)	-	8000	-
15.0(General)	-	0	-
15.2(Spillage Test)	-	7500	-
15.3(Humidity Test)	-	7500	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	6000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	6000	-
17(Over Load Protection of Transformers and associated circuits)	-	9000	-
18(Endurance Test requirements and tests)	-	14000	-
19(Abnormal Operation)	-	10000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	3000	-
22(Construction verification related test)	-	12500	-
23(General)	-	2000	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	3000	-
27(Provision for earthing)	-	3000	-
28(Screw test and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	1500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
30.2(Needle Flame Test)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
30.2(Needle Flame Test)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
30.2(Needle Flame Test)	-	0	-

24 Sep, 2026

-
Included w.e.f. 21.08.2025 Exclusion "22 (Construction verification related test) 24 (Components)" "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

4233

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 204 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 204 electric water boilers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	3000	-
11(TEMPRATURE RISE)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

4234

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	3000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	5000	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
30(Resistance to Heat & Fire)	-	2000	-
31(Resistance to Rusting)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

4235

BCH Electric Limited, Faridabad

8186026

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

Limit Switch, Foot Switch, Push Button, Control relay

1205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3.3(Emission)	-	0	Testing facility not available
8.3.3.3(Temperature rise )	-	25000	Internal products test
8.3.3.4(Dielectric properties)	-	50000	Internal products test
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	40000	Internal products test
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	70000	Internal products test
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	40000	Internal products test
8.3.3.5.5 b)( Dielectric verification)	-	25000	Internal products test
8.3.4.1(Performance under conditional short-circuit current)	-	70000	Internal products test
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	30000	Internal products test
8.2.5(Verification of actuation force or moment)	-	20000	Internal products test
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	10000	Internal products test
C.3(Electrical durability)	-	50000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
C.2(Mechanical durability)	-	50000	Internal products test
H.8.1 f)(Impulse voltage withstand test)	-	15000	Internal products test
H.8.5(Making and breaking capacities)	-	40000	Internal products test
Annex C(No. of operations)	-	20000	Internal products test
C.1.2(Observation)	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.2(Terminal identification and marking)	-	20000	Internal products test
5.2.3(Functional markings )	-	10000	Internal products test
5.2.4(Emergency stop)	-	10000	Internal products test
5.2.5(Operating diagram)	-	10000	Internal products test
5.2.5.1( Position indication )	-	10000	Internal products test
5.2.5.2( Terminal markings for operating diagrams)	-	10000	Internal products test
5.2.6(Time delay markings)	-	10000	Internal products test
5.3(Instructions for installation, operation and maintenance)	-	20000	Internal products test
5.4(Additional information)	-	20000	Internal products test
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	40000	Internal products test
8.3.4.3(Test circuit and test quantities)	-	20000	Internal products test
8.3.4.4 a)(Condition of the switching element after the test )	-	15000	Internal products test
8.3.4.4 b)(Condition of the switching element after the test )	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.1.5(Special tests)	-	0	Testing facility not available
G.8.1.1(Pull test)	-	15000	Testing facility not available
G.8.1.2(Torque test)	-	20000	Internal products test
G.8.1.4(Bend test)	-	0	Testing facility not available
F.8.1.2.3(Rapid change of temperature test)	-	0	Testing facility not available
F 8.1.2.4(Impact test)	-	0	Testing facility not available
F 8.1.2.6(Dielectric test after stresses)	-	15000	Internal products test
H.8.2(Voltage drop test)	-	0	Testing facility not available
H.8.4(OFF-state current)	-	0	Testing facility not available
7, J.7(Constructional requirements)	-	20000	Internal products test
G.8.1.3(Push test)	-	0	Testing facility not available
H.8.6(Performance under short circuit current conditions)	-	40000	Internal products test
J.7.1.12(Indicator lights with built-in transformers)	-	0	Testing facility not available
J.8.3.3.4(Dielectric test)	-	15000	Internal products test
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	15000	Internal products test
J.8.4.2(Indirect support mounting)	-	10000	Internal products test
H.8.7(Verification of electromagnetic compatibility)	-	0	Testing facility not available
J.8.3.3.3(Temp-rise tests)	-	25000	Internal products test
K 8.3.5(Mechanical operation at limits of temperature)	-	25000	Internal products test
K 8.3.7(Test Sequence VIII Verification of robustness of actuating system)	-	0	Testing facility not available
K 8.3.4(Performance under conditional shortcircuit current)	-	40000	Internal products test
L 8.4 (a)(Test of NC contact)	-	0	Testing facility not available
L 8.4 (b)(Test of NO contact)	-	0	Testing facility not available
7.1 & 8.2(Constructional requirements)	-	15000	Internal products test
7.3.1(General)	-	10000	Internal products test
7.3.2(Immunity)	-	0	Testing facility not available
J.8.3.4(Short Circuit test (on built-in transformers, if any))	-	0	Testing facility not available
J.8.4.1.2(Shock)	-	0	Testing facility not available
J.8.4.1.3(Vibration)	-	0	Testing facility not available
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	0	Testing facility not available
8.3.3.2(Operating limits of contactor relays )	-	30000	Internal products test
7(Constructional requirements)	-	10000	Internal products test
J.8.5(Degree of protection for indicating towers)	-	0	Testing facility not available
7.3.3(Emission)	-	0	Testing facility not available
8.3.3.3(Temperature rise )	-	25000	Internal products test
8.3.3.4(Dielectric properties)	-	50000	Internal products test
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	40000	Internal products test
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	70000	Internal products test
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	40000	Internal products test
8.3.3.5.5 b)( Dielectric verification)	-	25000	Internal products test
8.3.4.1(Performance under conditional short-circuit current)	-	70000	Internal products test
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	30000	Internal products test
8.2.5(Verification of actuation force or moment)	-	20000	Internal products test
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	10000	Internal products test
C.3(Electrical durability)	-	50000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
C.2(Mechanical durability)	-	50000	Internal products test
H.8.1 f)(Impulse voltage withstand test)	-	15000	Internal products test
H.8.5(Making and breaking capacities)	-	40000	Internal products test
Annex C(No. of operations)	-	20000	Internal products test
C.1.2(Observation)	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.2(Terminal identification and marking)	-	20000	Internal products test
5.2.3(Functional markings )	-	10000	Internal products test
5.2.4(Emergency stop)	-	10000	Internal products test
5.2.5(Operating diagram)	-	10000	Internal products test
5.2.5.1( Position indication )	-	10000	Internal products test
5.2.5.2( Terminal markings for operating diagrams)	-	10000	Internal products test
5.2.6(Time delay markings)	-	10000	Internal products test
5.3(Instructions for installation, operation and maintenance)	-	20000	Internal products test
5.4(Additional information)	-	20000	Internal products test
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	40000	Internal products test
8.3.4.3(Test circuit and test quantities)	-	20000	Internal products test
8.3.4.4 a)(Condition of the switching element after the test )	-	15000	Internal products test
8.3.4.4 b)(Condition of the switching element after the test )	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.1.5(Special tests)	-	0	Testing facility not available
G.8.1.1(Pull test)	-	15000	Testing facility not available
G.8.1.2(Torque test)	-	20000	Internal products test
G.8.1.4(Bend test)	-	0	Testing facility not available
F.8.1.2.3(Rapid change of temperature test)	-	0	Testing facility not available
F 8.1.2.4(Impact test)	-	0	Testing facility not available
F 8.1.2.6(Dielectric test after stresses)	-	15000	Internal products test
H.8.2(Voltage drop test)	-	0	Testing facility not available
H.8.4(OFF-state current)	-	0	Testing facility not available
7, J.7(Constructional requirements)	-	20000	Internal products test
G.8.1.3(Push test)	-	0	Testing facility not available
H.8.6(Performance under short circuit current conditions)	-	40000	Internal products test
J.7.1.12(Indicator lights with built-in transformers)	-	0	Testing facility not available
J.8.3.3.4(Dielectric test)	-	15000	Internal products test
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	15000	Internal products test
J.8.4.2(Indirect support mounting)	-	10000	Internal products test
H.8.7(Verification of electromagnetic compatibility)	-	0	Testing facility not available
J.8.3.3.3(Temp-rise tests)	-	25000	Internal products test
K 8.3.5(Mechanical operation at limits of temperature)	-	25000	Internal products test
K 8.3.7(Test Sequence VIII Verification of robustness of actuating system)	-	0	Testing facility not available
K 8.3.4(Performance under conditional shortcircuit current)	-	40000	Internal products test
L 8.4 (a)(Test of NC contact)	-	0	Testing facility not available
L 8.4 (b)(Test of NO contact)	-	0	Testing facility not available
7.1 & 8.2(Constructional requirements)	-	15000	Internal products test
7.3.1(General)	-	10000	Internal products test
7.3.2(Immunity)	-	0	Testing facility not available
J.8.3.4(Short Circuit test (on built-in transformers, if any))	-	0	Testing facility not available
J.8.4.1.2(Shock)	-	0	Testing facility not available
J.8.4.1.3(Vibration)	-	0	Testing facility not available
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	0	Testing facility not available
8.3.3.2(Operating limits of contactor relays )	-	30000	Internal products test
7(Constructional requirements)	-	10000	Internal products test
J.8.5(Degree of protection for indicating towers)	-	0	Testing facility not available

05 Jun, 2028

-
-

4236

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

L.D.-2.5,M.D.-10,H.D.-20, E.H.D.-35

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(General)	-	100	-
3(Type/Shape of Cover)	-	100	-
8(LIFTING HOOKS)	-	100	-
5.2 and Table 1(Dimensions of Frame - A)	-	100	-
5.2 and Table 1(Dimensions of Frame - B)	-	100	-
5.2 and Table 1(Dimensions of Frame - C)	-	100	-
5.2 and Table 1(Dimensions of Frame - D)	-	100	-
5.2 and Table 1(Dimensions of Frame - E)	-	100	-
5.2 and Table 1(Dimensions of Frame - F)	-	100	-
5.2(Dimensions of cover- Diameter)	-	100	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	100	-
5.2(Top surface ofthe frame and cover is in level)	-	100	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	100	-
5.2 and Fig 1(Clear cover to reinforcement)	-	200	-
5.2 and Fig 1(Distance of housing from the edge)	-	200	-
7.4.1(Edge Protection and Finishing - Frame)	-	200	-
7.4.2(Edge Protection and Finishing - Cover)	-	200	-
9.3 and Table and Annex C(Load Test)	-	1000	-
Clause No. 6(Design)	-	200	-
Clause No. 7.4.1(Edge protection and finishing of frame (Size of mild steel flat))	-	200	-
Clause No. 7.4.1(Edge protection and finishing of frame (Steel connectors))	-	200	-
Clause No. 7.4.2(Edge protection and finishing of cover (Cover finish of top surface))	-	200	-
Clause No. 7.4.2(Edge protection and finishing of cover (Thikness of MS sheet))	-	200	-
Clause No. 7.4.4(Compatitbilty of Seating of cover and frame)	-	200	-
Clause No. 8(Lifting Hooks (Diameter of MS rod))	-	200	-
Clause No. 8(Lifting Device)	-	200	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(Test Load)	-	2000	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(2/3rd of Test Load)	-	2000	-
Clause No. 9.3 Annex C(Permanent set of cover)	-	2000	-
Clause No. 9.3 Annex C(Cracks at bottom side of the cover )	-	100	-
Clause No. 9.3 Annex C(Adhesion between concrete and reinforcing steel)	-	0	-
Clause No. 5.2, Figure 1(Typical Illustration of circular precast concrete manhole cover)	-	0	-

26 Aug, 2027

-
-

4237

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC

7560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	200	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	200	-
7 Table-3 ii b(Expansion by Autoclave)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 iv(Magnesia)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 vii(Chloride content)	-	560	-
6.1 Table-2 viii(Alkali content)	-	600	-

26 Aug, 2027

-
-

4238

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 712 (1984)

Specification for building limes (Third Revision)

Class-A/B/C/D/E/F

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4 ,Table 1(Chem reqd)	-	0	--
cl 4, Table 2(Physical reqd)	-	0	--
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	500	--
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	500	--
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	500	--
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	500	--
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	500	--
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	200	--
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	250	--
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	250	--
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	500	--
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	500	-

26 Aug, 2027

-
-

4239

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Grade-1/Grade-2

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	500	-
8.2(Physical requirments-Dimensions-Length)	-	1000	-
8.2(Physical requirments-Dimensions-Height)	-	1000	-
8.2(Physical requirments-Dimensions-Width)	-	1000	-
8.3(Physical requirments- Block density)	-	2500	-
8.4(Physical requirments- Compressive strength)	-	3000	-
8.5(Thermal Conductivity)	-	10000	-
8.6( Drying Shrinkage )	-	5000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	1300	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	1000	-
3.2 & 8.2(Indivisual Height)	-	500	-
3.2 & 8.2(Indivisual Width)	-	500	-
3.2 & 8.2(Indivisual Length)	-	500	-
8.6, 9.4 & 11.5(Grade)	-	200	-

26 Aug, 2027

-
-

4240

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

Grade A,B & C TYPE HOLLOW AND SOLIDCONCRETE BLOCKS

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	500	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	500	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	500	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	500	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	500	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	500	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	500	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	2000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	1000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	5400	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2000	-
15(Marking)	-	500	-

26 Aug, 2027

-
-

4241

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30,M-35,M-40,M-50,M-55

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.1.1 (General Quality)	-	200	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	200	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	200	-
Clause 7.1.3 (Colour and Texture)	-	200	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	200	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	100	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	200	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	100	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	100	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	100	-
Clause 7.3, Annex G(Average Breaking Load)	-	100	-
Clause 7.3, Annex G(Individual Breaking Load)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	500	15% Discount for BIS Sample
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	100	15% Discount for BIS Sample
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	100	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	200	-
10(Marking)	-	100	-

26 Aug, 2027

-
-

4242

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Coarse and Fine aggregate

15300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	200	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	200	-
5.4.2(a)( Aggregates Impact Value)	-	200	-
5.4.2(b)( Aggregates Impact Value)	-	200	-
5.4.3(a)( Aggregate Abrasion Value)	-	200	-
5.4.3(b)( Aggregate Abrasion Value)	-	200	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	200	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	200	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	200	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	200	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	200	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	200	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	200	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	200	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	200	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	200	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	200	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	200	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	200	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	200	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	200	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	200	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	200	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	200	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	200	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	200	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	200	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	200	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	200	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	200	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	200	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	200	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	200	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	200	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	200	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	200	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	200	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	200	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	200	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	200	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	200	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	200	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	200	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	200	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	200	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	200	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	200	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	200	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	200	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	200	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	200	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	200	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	200	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	200	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	200	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	200	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	200	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	200	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	200	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	100	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	200	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	200	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	200	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	200	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	200	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	200	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	200	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	200	-
5.3(Elongation Index)	-	200	-
5.3(Flakiness Index)	-	200	-
7.2(Bulk Density loose)	-	200	-
7.2(Bulk Density Rodded)	-	200	-
5.5(Soundness By Magnesium Sulphate)	-	200	-
7.2(Bulking Of Fine Aggregate)	-	200	-

26 Aug, 2027

-
-

4243

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	700	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	700	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	700	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	0	0
5.4.2-IS: 3025(P-11)(Ph)	-	500	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	500	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	500	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	0	0
Cl 5.4 Table 1 (i)(Organic Solids)	-	0	0

26 Aug, 2027

-
-

4244

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4351 (2024)

Steel Frames for Doors - Specification (Third Revision)

Profile A, B, C, D & E

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5, Table-1 (i)(Mild steel sheet (cold rolled))	-	25000		-

-
-

4245

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 7898 (2024)

Manually Operated Chaff Cutter - Specification and Test Code(Third Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1(Material)	-	17500		-

-
-

4246

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

Group BIa/BIb/BIIa/BIIb/BIII

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 table 5, i a (Length-IS 13630(pt-1))	-	200	-
6 table 5,i a (width-IS 13630(pt-1))	-	200	-
6 table 5, i b (Thickness- IS 13630(pt-1))	-	200	-
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1000	-
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	2500	-
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	-
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	1500	-
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	1500	-
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	1200	-
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	1000	-
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	1000	-
6 table 6, i a (Length-IS 13630(pt-1))	-	200	-
6 table 6, i a (width-IS 13630(pt-1))	-	200	-
6 table 6, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	2500	-
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	1500	-
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	1500	-
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	1200	-
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 7, i a (Length-IS 13630(pt-1))	-	200	-
6 table 7, i a (width-IS 13630(pt-1))	-	200	-
6 table 7, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	2500	-
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	500	-
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	1500	-
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	1500	-
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	1200	-
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 8, i a (Length-IS 13630(pt-1))	-	200	-
6 table 8, i a (width-IS 13630(pt-1))	-	200	-
6 table 8, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	2500	-
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	1500	-
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	1500	-
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	1000	-
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	1200	-
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 9, i a (Length-IS 13630(pt-1))	-	200	-
6 table 9, i a (width-IS 13630(pt-1))	-	200	-
6 table 9, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	2500	-
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	1500	-
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	1500	-
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 9, ii q(Bulk Density-)	-	1000	-
6 table 9, iii a(Resistance to staining )	-	1200	-
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6.0, Table 5 - 9 & SI No. - 1E(3)(Warpage)	-	200	-
6.0, Table 5 - 9 & SI No. - 1E(2)(Edge Curveture)	-	200	-
CLAUSE NO. 5.2(Shapes and Sizes)	-	200	-

26 Aug, 2027

-
-

4247

HT Product Services Private Limited, Noida

8175006

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	5000	-
6(Standard ratings)	-	5000	-
7(Classification)	-	5000	-
8(Marking)	-	5000	-
9(Dimensions)	-	5000	-
10(Protection against electric shock)	-	5000	-
11(Terminals)	-	5000	-
12(Provision for earthing)	-	5000	-
13(Construction)	-	5000	-
14(Switched lampholders)	-	5000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16(Mechanical strength)	-	5000	-
17(Screws, current-carrying parts and connections)	-	5000	-
18(Creepage distances and clearances)	-	5000	-
19(General resistance to heat)	-	5000	-
20(Resistance to heat, fire and tracking)	-	5000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
Annex A(Season cracking/corrosion test)	-	5000	-
12.4(Thermal tests)	-	5000	-
9.1(Lampholder dimensions)	-	5000	-
11.2(Terminals)	-	5000	-
12.3(Provision for earthing)	-	5000	-
13.1(Construction)	-	5000	-
13.8(Construction)	-	5000	-
14.4(Switched lampholders)	-	5000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16.7(Mechanical strength)	-	5000	-
16.8(Mechanical strength)	-	5000	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
4(General requirements)	-	5000	-
6(Standard ratings)	-	5000	-
7(Classification)	-	5000	-
8(Marking)	-	5000	-
9(Dimensions)	-	5000	-
10(Protection against electric shock)	-	5000	-
11(Terminals)	-	5000	-
12(Provision for earthing)	-	5000	-
13(Construction)	-	5000	-
14(Switched lampholders)	-	5000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16(Mechanical strength)	-	5000	-
17(Screws, current-carrying parts and connections)	-	5000	-
18(Creepage distances and clearances)	-	5000	-
19(General resistance to heat)	-	5000	-
20(Resistance to heat, fire and tracking)	-	5000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
Annex A(Season cracking/corrosion test)	-	5000	-
12.4(Thermal tests)	-	5000	-
9.1(Lampholder dimensions)	-	5000	-
11.2(Terminals)	-	5000	-
12.3(Provision for earthing)	-	5000	-
13.1(Construction)	-	5000	-
13.8(Construction)	-	5000	-
14.4(Switched lampholders)	-	5000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16.7(Mechanical strength)	-	5000	-
16.8(Mechanical strength)	-	5000	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-

03 Dec, 2026

-
Included w.e.f.18.08.2025

4248

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 16014 (2024)

MECHANICALLY WOVEN DOUBLE-TWISTED HEXAGONAL WIRE MESH GABIONS REVET MATTRESSES ROCK FALL NETTING AND OTHER PRODUCTS FOR CIVIL ENGINEERING PURPOSES GALVANIZED STEEL WIRE OR GALVANIZED STEEL WIRE WITH POLYMER COATING SPECIFICATION ( Second Revision )

ALL

388000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Material and Manufacture)	-	1000	-
Cl-5.1.1(Class 1 double-twisted mesh)	-	1500	-
Cl-5.1.2(Class 2 double-twisted mesh)	-	1500	-
Cl-5.4.1(Galvanized Rings)	-	1000	-
Cl-5.4.2(Stainless Steel Fasteners)	-	2500	-
Cl-6.1(Tensile Strength)	-	2500	-
Cl-6.2, Table-7 (i)(Mesh wire dia, mm)	-	500	-
Cl-6.2, Table-7 (ii)(Tensile Strength Parallel to twist, kN/m)	-	3500	-
Cl-5.3(Lacing wire and stiffeners)	-	2500	-
Cl-7.1.1(Mass of Zinc/Zinc Alloy Coating)	-	1500	-
Cl-7.1.2(Adhesion of Zinc/Zinc Alloy Coating)	-	1500	-
Cl-7.1.3(Ageing and Corrosion Resistance)	-	95000	-
Cl-7.2 (a)(Specific gravity)	-	500	-
Cl-7.2 (b)(Tensile strength)	-	2500	-
Cl-7.2 (c)(Hardness)	-	1000	-
Cl-7.2 (d)(Resistance of polymer coating to sodium chloride solution)	-	5500	-
Cl-7.2 (e)(Salt spray exposure)	-	90000	-
Cl-7.2 (f)(Modulus of Elasticity)	-	2500	-
Cl-7.2 (g)(Brittleness Temperature)	-	5500	-
Cl-7.2 (h)(Resistance to UV rays)	-	195000	-
Cl-8.12(Mesh Opening Tolerances)	-	1000	-
Cl-9(Workmanship)	-	500	-
Cl-12.1(Tensile Strength of Wire Mesh Panel)	-	2500	-
Cl-12.2(Punch Test)	-	5500	-
Cl-12.3(Pull-Apart Resistance Test/Selvedge Strength Test/Panel to Panel Connection)	-	5000	-
Cl-12.4(Metallic Coating Mass)	-	1500	-
Cl-12.5(Polymer Coating Thickness)	-	1000	-
Cl-12.6(Polymer Coating)	-	0	Already filled in clause 7.2 (d)
Cl-12.7.1(Abrasion Resistance Test)	-	3500	-
Cl-12.7.2(Corrosion Spread Test)	-	50000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (i)(Mesh wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (ii)(Edge/Selvedge wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iii)(Lacing wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iv)(Polymer coating thickness,mm)	-	0	Already filled in cl. 12.5
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (v)(Typical sizes Length ×Width × Height(m))	-	500	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (vi)(Tolerances in size of Units)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (i)(Mesh wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (ii)(Edge/Selvedge wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iii)(Lacing wire dia, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iv)(Polymer coating thickness, mm)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (v)(Typical size Length × Width)	-	500	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (vi)(Tolerances in size of netting rolls)	-	500	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (i)(Mesh wire dia,)	-	500	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (ii)(Tensile Strength Parallel to twist,)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iii)(Tensile Strength Perpendicular to twist, kN/m)	-	2500	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iv)(Selvedge Strength, kN/m)	-	2500	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (v)(Punch Strength, kN)	-	0	Already filled cl. 12.2
Cl-6.2, 11.2, 12.2 (b), Table-7 (vi)(Panel to panel connection(lacing wire/ fasteners), kN/m)	-	2500	-
Cl-13(Marking)	-	500	-
Cl-5(Material and Manufacture)	-	0	-
Cl-5.1.1(Class 1 double-twisted mesh)	-	0	-
Cl-5.1.2(Class 2 double-twisted mesh)	-	0	-
Cl-5.4.1(Galvanized Rings)	-	0	-
Cl-5.4.2(Stainless Steel Fasteners)	-	0	-
Cl-6.1(Tensile Strength)	-	0	-
Cl-6.2, Table-7 (i)(Mesh wire dia, mm)	-	0	-
Cl-6.2, Table-7 (ii)(Tensile Strength Parallel to twist, kN/m)	-	0	-
Cl-5.3(Lacing wire and stiffeners)	-	0	-
Cl-7.1.1(Mass of Zinc/Zinc Alloy Coating)	-	0	-
Cl-7.1.2(Adhesion of Zinc/Zinc Alloy Coating)	-	0	-
Cl-7.1.3(Ageing and Corrosion Resistance)	-	0	-
Cl-7.2 (a)(Specific gravity)	-	0	-
Cl-7.2 (b)(Tensile strength)	-	0	-
Cl-7.2 (c)(Hardness)	-	0	-
Cl-7.2 (d)(Resistance of polymer coating to sodium chloride solution)	-	0	-
Cl-7.2 (e)(Salt spray exposure)	-	0	-
Cl-7.2 (f)(Modulus of Elasticity)	-	0	-
Cl-7.2 (g)(Brittleness Temperature)	-	0	-
Cl-7.2 (h)(Resistance to UV rays)	-	0	-
Cl-8.12(Mesh Opening Tolerances)	-	0	-
Cl-9(Workmanship)	-	0	-
Cl-12.1(Tensile Strength of Wire Mesh Panel)	-	0	-
Cl-12.2(Punch Test)	-	0	-
Cl-12.3(Pull-Apart Resistance Test/Selvedge Strength Test/Panel to Panel Connection)	-	0	-
Cl-12.4(Metallic Coating Mass)	-	0	-
Cl-12.5(Polymer Coating Thickness)	-	0	-
Cl-12.6(Polymer Coating)	-	0	-
Cl-12.7.1(Abrasion Resistance Test)	-	0	-
Cl-12.7.2(Corrosion Spread Test)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (i)(Mesh wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (ii)(Edge/Selvedge wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iii)(Lacing wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iv)(Polymer coating thickness,mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (v)(Typical sizes Length ×Width × Height(m))	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (vi)(Tolerances in size of Units)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (i)(Mesh wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (ii)(Edge/Selvedge wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iii)(Lacing wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iv)(Polymer coating thickness, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (v)(Typical size Length × Width)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (vi)(Tolerances in size of netting rolls)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (i)(Mesh wire dia,)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (ii)(Tensile Strength Parallel to twist,)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iii)(Tensile Strength Perpendicular to twist, kN/m)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iv)(Selvedge Strength, kN/m)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (v)(Punch Strength, kN)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (vi)(Panel to panel connection(lacing wire/ fasteners), kN/m)	-	0	-
Cl-13(Marking)	-	0	-
Cl-5(Material and Manufacture)	-	0	-
Cl-5.1.1(Class 1 double-twisted mesh)	-	0	-
Cl-5.1.2(Class 2 double-twisted mesh)	-	0	-
Cl-5.4.1(Galvanized Rings)	-	0	-
Cl-5.4.2(Stainless Steel Fasteners)	-	0	-
Cl-6.1(Tensile Strength)	-	0	-
Cl-6.2, Table-7 (i)(Mesh wire dia, mm)	-	0	-
Cl-6.2, Table-7 (ii)(Tensile Strength Parallel to twist, kN/m)	-	0	-
Cl-5.3(Lacing wire and stiffeners)	-	0	-
Cl-7.1.1(Mass of Zinc/Zinc Alloy Coating)	-	0	-
Cl-7.1.2(Adhesion of Zinc/Zinc Alloy Coating)	-	0	-
Cl-7.1.3(Ageing and Corrosion Resistance)	-	0	-
Cl-7.2 (a)(Specific gravity)	-	0	-
Cl-7.2 (b)(Tensile strength)	-	0	-
Cl-7.2 (c)(Hardness)	-	0	-
Cl-7.2 (d)(Resistance of polymer coating to sodium chloride solution)	-	0	-
Cl-7.2 (e)(Salt spray exposure)	-	0	-
Cl-7.2 (f)(Modulus of Elasticity)	-	0	-
Cl-7.2 (g)(Brittleness Temperature)	-	0	-
Cl-7.2 (h)(Resistance to UV rays)	-	0	-
Cl-8.12(Mesh Opening Tolerances)	-	0	-
Cl-9(Workmanship)	-	0	-
Cl-12.1(Tensile Strength of Wire Mesh Panel)	-	0	-
Cl-12.2(Punch Test)	-	0	-
Cl-12.3(Pull-Apart Resistance Test/Selvedge Strength Test/Panel to Panel Connection)	-	0	-
Cl-12.4(Metallic Coating Mass)	-	0	-
Cl-12.5(Polymer Coating Thickness)	-	0	-
Cl-12.6(Polymer Coating)	-	0	-
Cl-12.7.1(Abrasion Resistance Test)	-	0	-
Cl-12.7.2(Corrosion Spread Test)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (i)(Mesh wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (ii)(Edge/Selvedge wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iii)(Lacing wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iv)(Polymer coating thickness,mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (v)(Typical sizes Length ×Width × Height(m))	-	0	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (vi)(Tolerances in size of Units)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (i)(Mesh wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (ii)(Edge/Selvedge wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iii)(Lacing wire dia, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iv)(Polymer coating thickness, mm)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (v)(Typical size Length × Width)	-	0	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (vi)(Tolerances in size of netting rolls)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (i)(Mesh wire dia,)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (ii)(Tensile Strength Parallel to twist,)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iii)(Tensile Strength Perpendicular to twist, kN/m)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iv)(Selvedge Strength, kN/m)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (v)(Punch Strength, kN)	-	0	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (vi)(Panel to panel connection(lacing wire/ fasteners), kN/m)	-	0	-
Cl-13(Marking)	-	0	-

25 Feb, 2027

-
Included w.e.f 23.07.2025

4249

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 16286 (2014)

Spoons - Specification

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(food grade stainless steel.)	-	10000	Cl- 3.1, 3.2(i),3.2(ii)- Rs 10000/-
3.2 (i)(Brass as parent material)	-	0	-
3.2(ii)(Brass plated with pure silver)	-	0	-
3.3(Plastic handle)	-	500	-
4(Shapes and Dimensions)	-	3500	-
5.1(Manufacture)	-	500	-
5.2(Workmanship)	-	500	-
5.3(Finish)	-	5000	-
8(Marking)	-	500	-
9(Packing)	-	500	-
Cl-6.1(Staining Test)	-	2500	-
Cl-6.2(Bending Test)	-	1500	-
Cl-6.3(Load Test)	-	2500	-
Cl-6.4.1(Boiling)	-	2500	-
Cl-6.4.2(Impact)	-	2500	-
Cl-6.4.3(Staining)	-	2500	-

25 Feb, 2027

-
Included w.e.f 23.07.2025

4250

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 18755 (2024)

Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification

All Type

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of material and designation)	-	12500	-
Cl-5(Manufacturer)	-	12500	-
Cl-6(Aluminium for use as matrix)	-	12500	-
Cl-6(Top-surface of the aluminium matrix)	-	12500	-
Cl-6(Bottom-surface of the aluminium matrix)	-	12500	-
Cl-7.1.1(Tensile properties)	-	12500	-
Cl-7.1.1(Apparent Yield Strength)	-	12500	-
Cl-7.1.1(Tensile Strength Mpa,)	-	12500	-
Cl-7.1.2(Test Specimen)	-	12500	-
Cl-7.1.3(Test Parameters)	-	12500	-
Cl-7.2.1(Bond strength of Tri-Ply)	-	12500	-
Cl-7.2.2(Sample Preparation and Test Specimen)	-	12500	-
Cl-7.2.3(Test Apparatus)	-	12500	-
Cl-7.2.4(Procedure)	-	12500	-
Cl-8.1(Sample of suitable size)	-	12500	-
Cl-8.2(specimen for peel strength)	-	12500	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface)	-	12500	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface)	-	12500	-
Cl-9.1(Thickness)	-	12500	-
Cl-9.2(Diameter)	-	12500	-
Cl-9.3(Flatness)	-	12500	-
Cl-10(surface finish)	-	12500	-
Cl-11(Workmanship, finish and appearance)	-	12500	-
Cl-14(Marking)	-	12500	-

02 Jun, 2027

-
Included w.e.f.29.07.2025

4251

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	500	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	2500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	2500	-
19(ABNORMAL OPERATION)	-	2500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.16(Automatic cord reel)	-	500	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	500	-
24(Components)	-	1000	-
4(General requirements)	-	500	-
5(General Conditions of tests)	-	500	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	40000 and 20% Discount for BIS

-
Included w.e.f 16.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 22.32 Oxygen bomb for rubber material

4252

CIPET, Hyderabad

6111634

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

Emitters

3525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	0	-
Cl-5.2(Emitter Ends)	-	0	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	0	-
Cl-6.2.1(polyethylene pipe)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	0	-
Cl-6.2.3(water temperature)	-	0	-
Cl-6.3(Accuracy or Measuring Devices)	-	0	-
Cl-7.1(Construction and Workmanship)	-	300.0	25% DISCOUNT FOR BIS
Cl-7.2(Flow Paths in Emitter)	-	300.0	25% DISCOUNT FOR BIS
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000.0	25% DISCOUNT FOR BIS
Cl-7.4(Emitter Pull-Out)	-	500.0	25% DISCOUNT FOR BIS
Cl-7.4.1(In-Line Emitters)	-	500.0	25% DISCOUNT FOR BIS
Cl-7.4.2(On-Line Emitters)	-	500.0	25% DISCOUNT FOR BIS
Cl-8.1.1(Uniformity of Emission Rate)	-	1000	25% DISCOUNT FOR BIS
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000.0	25% DISCOUNT FOR BIS
Cl-8.1.3(Determination of Emitter Exponent)	-	600.0	25% DISCOUNT FOR BIS
Cl-9(Marking)	-	500.0	25% DISCOUNT FOR BIS

23 Feb, 2027

-
Included w.e.f 28.07.2025

4253

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3748 (2022)

Tool Steels - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Shape, dimensions and tolerances)	-	4500	For dimensional and other qualitative test
7.2(Chemical Composition)	-	5000	For chemical test
7.2(Carbon)	-	5000	For chemical test
7.2(Silicon)	-	5000	For chemical test
7.2(Manganese)	-	4999.98	For chemical test
7.2(Nickel)	-	5000	For chemical test
7.2(Chromium)	-	5000	For chemical test
7.2(Molybdenum)	-	5000	For chemical test
7.2(Sulphur)	-	5000	For chemical test
7.2(Phosphorus)	-	5000	For chemical test
7.2(Nitrogen)	-	5000	For chemical test
7.2(Copper)	-	5000	For chemical test
7.2(Aluminium)	-	5000	For chemical test
7.2(Titanium)	-	5000	For chemical test
7.2(Niobium)	-	5000	For chemical test
7.2(Cerium)	-	5000	For chemical test
7.2(Tantalum)	-	5000	For chemical test
7.2(Cobalt)	-	5000	For chemical test
7.2(Tungsten)	-	5000	For chemical test
7.2(Vanadium)	-	5000	For chemical test
7.3(Surface Quality)	-	4499.98	For dimensional and other qualitative test
7.4(Shapes, dimensions and tolerances)	-	4500	For dimensional and other qualitative test
7.2(Hardness Test)	-	3000	For hardness test
Annex B.3(Verification of Minimum Hardness in Hardening Test)	-	3000	For hardness test
Annex B.7(Non-Destructive Test)	-	4500	For dimensional and other qualitative test
As per Clause 7.2, Table 2 to 9(Carbon)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Silicon)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Manganese)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Chromium)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Sulphur)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(phosphorus)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Cobalt)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Molybdenum)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(vanadium)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Tunsten)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Nickel)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Nitrogen)	-	5000	For chemical test
4.1(Classification)	-	4500	For dimensional and other qualitative test
4.2(Designation)	-	4500	For dimensional and other qualitative test
6.2.1(General)	-	4500	For dimensional and other qualitative test
6.2.2(Heat-treatment condition)	-	4500	For dimensional and other qualitative test
6.2.3(Surface Condition)	-	4500	For dimensional and other qualitative test
7.1(General requirements)	-	4500	For dimensional and other qualitative test
7.2(Chemical composition and mechanical properties)	-	5000	For chemical test
7.3(Surface quality)	-	4500	For dimensional and other qualitative test
7.4(Shape, dimensions and tolerances)	-	4499.99	For dimensional and other qualitative test
9(Marking)	-	4499.98	For dimensional and other qualitative test
11.1(Product diameter or thickness ≥ 15 mm)	-	4500	For dimensional and other qualitative test
11.2(Product diameter or thickness < 15 mm)	-	4500	For dimensional and other qualitative test

-
Included w.e.f.30.06.2025

4254

BIS, Central Laboratory (CL)

None

IS 2556 : Part 2 (2024)

Vitreous China Sanitary Appliances âSpecification Part 2 Specific Requirements of Washdown Water Closets (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3 (GENERAL REQUIREMENTS)	-
Cl-5 (DIMENSIONS AND TOLERANCES)	-
Cl-6 (CONSTRUCTIONS)	-
As per Clause 5 - Table 1 - i) (Height - A)	-
As per Clause 5 - Table 1 - ii) (Depth of water seal, Min - H)	-
As per Clause 5 - Table 1 - iii) (Width of water closet - J)	-
As per Clause 5 - Table 1 - iv) (Distance from centre of seat bolt hole to front of water closet - K)	-
As per Clause 5 - Table 1 - v) (Distance from centre of seat bolt hole to inside face of flush rim at back, Max - L)	-
As per Clause 5 - Table 1 - vi) (Distance between a vertical line from tip of back plate to inside face of flush rim at back, Max - O)	-
As per Clause 5 - Table 1 - vii) (Width of opening, Min - P)	-
As per Clause 5 - Table 1 - viii) (Length of opening, Min - Q)	-
As per Clause 5 - Table 1 - ix) (Overall length - S)	-
As per Clause 5 - Table 1 - x) (Trap inlet depth, Min - T)	-
As per Clause 5 - Table 1 - xi) (Water surface Back to front - W1)	-

-
-

4255

BIS, Central Laboratory (CL)

None

IS 251 (2024)

SODA ASH, TECHNICAL â SPECIFICATION (fifth revision)

Technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 ("Description ( IS 251 : 2024 )")	-
4.2 ("Bulk Density ( IS 251 : 2024 )")	-
4.3 ("Volatile Matter Content ( IS 251 : 2024 )")	-
4.4 ("Sieve Analysis of Dense Grade Soda Ash ( IS 251 : 2024 )")	-
4.4.1 ("Material retained on 1.70 mm IS Sieve ( IS 251 : 2024 )")	-
4.4.1 ("Material passing through 75 μm IS Sieve ( IS 251 : 2024 )")	-
4.5 Table 1 (i) ("Total alkalinity (as Na₂CO₃) ( IS 251 : 2024 )")	-
4.5 Table 1 (ii) ("Matter insoluble in water ( IS 251 : 2024 )")	-
4.5 Table 1 (iii) ("Sulphate (Na₂SO₄) ( IS 251 : 2024 )")	-
4.5 Table 1 (iv) ("Chloride (as NaCl) ( IS 251 : 2024 )")	-
4.5 Table 1 (5) ("Iron (as Fe₂O₃) ( IS 251 : 2024 )")	-

-
-

4256

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

ALL

123780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	2000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	2500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	2000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	7500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	2500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	7500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	3000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	3000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	3000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1500	-
IS 191:2007 & IS 440(Copper purity test)	-	2500	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	1500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	750	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	1500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	1500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	750	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	2500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	750	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	2000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	750	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	750	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	1500	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3500	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	20000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	2500	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	1500	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	3000	-
IS 191:2007 & IS 440(Copper purity test)	-	3000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	750	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3500	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	750	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	750	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	3000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3500	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	3500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	750	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1500	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3500	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5500	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	2000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	3000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2500	-
IS 191:2007 & IS 440(Copper purity test)	-	22500	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	1500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3500	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3500	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	3500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3500	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	3500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1500	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3500	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3500	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	30000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	2500	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3500	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5500	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	2500	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1500	-

26 Jul, 2027

-
Included w.e.f. 01.09.2025

4257

Samridhi Test House Pvt. Ltd.

8184706

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

Safety glass - Specification: Part 2 for road transport

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	4900	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.1(Light Transmittance)	-	4700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.1(Resistance to Abrasion)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.2(Resistance to Abrasion)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.1(Resistance to Abrasion)	-	1800	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.1(Resistance to Abrasion)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.2(Resistance to Abrasion)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.2(Resistance to Abrasion)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.2.1(Resistance to Temperature Changes)	-	3400	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.2.2(a) Resistance to Fire)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.2.2(b) Resistance to Fire)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.1 (Resistance to Radiation)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.2(Resistance to High Temperature)	-	2000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.1(Resistance to Humidity)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.2(Resistance to Humidity)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.2(Resistance to Humidity)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.3(Resistance to Humidity)	-	6500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.1(Optical Distortion)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.1.3 (Optical Distortion)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Secondary area)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2.3(Secondary image separation test)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.1(Head-form Test (Location of crack))	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.3.1(Head-form Test)	-	7200	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.3.2(Head-form Test)	-	7200	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.4(2.260 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.1(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.2(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.3(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.4(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.1(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.4(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.5(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.5.1(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.5.2(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.2(227 g ball test)	-	1900	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.2.1.1(227 g ball test)	-	600	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.2.1.2(227 g ball test)	-	600	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.2.1.3(227 g ball test)	-	600	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	5500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.1( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.2.1( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.2.2( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.2.3( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-a( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-b-1( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-b-2( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-b-3( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.1.7( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.1.8( Head-form Test-The HIC value )	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.4-a(Mechanical Strength Test — 227g Ball)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.4-b(Mechanical Strength Test — 227g Ball)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.3.3(Flexibility and Fold Test)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.4.4-a(Weathering)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.4.4-b(Weathering)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.5.3-a(Cross-cut)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.5.3-b-1(Cross-cut)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.1.1(227 g Ball Test at 20 ± 5°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.2.1(227g Ball Test at –18° ± 2°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.3.1(Flexibility Test and Fold Test)	-	8500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.3.1(Flexibility Test and Fold Test)	-	8500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5(227 g Ball test)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 3.7(Wind screen and Panes)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 4.1(Wind screen and Panes)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 5.8.2(Wind screen)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 5.8.3(Wind screen)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.1(Head-form Test (Location of crack))	-	0	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	0	-
5.4.5(227 g Ball test)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
As per Clause 5.8.2(Wind screen)	-	0	-
As per Clause 5.8.3(Wind screen)	-	0	-
5.4.3.1(Head-form Test (Location of crack))	-	0	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	0	-
5.4.5(227 g Ball test)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
As per Clause 5.8.2(Wind screen)	-	0	-
As per Clause 5.8.3(Wind screen)	-	0	-
5.4.3.1(Head-form Test (Location of crack))	-	0	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	0	-
5.4.5(227 g Ball test)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
As per Clause 5.8.2(Wind screen)	-	0	-
As per Clause 5.8.3(Wind screen)	-	0	-

-
Included w.e.f 28.07.2025

4258

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-
3(GENERAL REQUIREMENT)	-	-	-
4(GENERAL NOTES ON TESTS)	-	-	-
5(RATING)	-	-	-
6(CLASSIFICATION)	-	-	-
7(MARKING)	-	-	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-	-
10(INPUT AND CURRENT)	-	-	-
11(HEATING)	-	-	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	-	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	-	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	-	-
15(MOISTURE RESISTANCE)	-	-	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-	-
17(OVERLOAD PROTECTION)	-	-	-
18(ENDURANCE )	-	-	-
19(ABNORMAL OPERATION)	-	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-	-
21(MECHANICAL STRENGTH)	-	-	-
22(CONSTRUCTION)	-	-	-
23(INTERNAL WIRING)	-	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-	-
27(PROVISION FOR EARTHING)	-	-	-
28(SCREWS AND CONNECTIONS)	-	-	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	-	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	-	-
31(RESISTANCE TO RUSTING)	-	-	-
101.1(Type Tests)	-	-	-
101.2(Acceptance Tests)	-	-	-
101.3(Routine Tests)	-	-	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

4259

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

9700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(The smell of the material shall not be objectionable during application)	-	0	Facilty Not available
Cl-5.1 (a)(Pigment)	-	350	-
Cl-5.1 (b)(Driers)	-	0	Facility for Identification of type of driers not available
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	900	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	Facilty Not available
Cl-5.2(Material)	-	0	Facilty Not available
Cl-5.3(Compatibility with Thinner)	-	150	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	Facilty Not available
Cl-5.5(Lead Restriction)	-	400	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	150	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	200	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	200	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	400	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	150	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	250	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	200	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	150	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	200	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	200	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	400	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	400	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	1000	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	500	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	500	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	1000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	200	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	200	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	350	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	250	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	Facility Not available
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	Facility Not available
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	Facility Not available
Cl-5.2(Material)	-	0	Facility Not available
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	Facility Not available
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	Facility Not available
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	Facility Not available
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	Facility Not available
Cl-5.2(Material)	-	0	Facility Not available
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	Facility Not available
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	( FOR KEEPING PROPERTIES THE TEST CHARGES WILL BE 500 )
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-

31 Dec, 2026

-
Included w.e.f. 26.09.2025 Exclusion: "Cl-4 (The smell of the material shall not be objectionable during application) Cl-5.1.2 (volatile vehicle) Cl-5.4 (Freedom from Objectionable Impurities) "

4260

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 13450 : PART 2 : SEC 4 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 4 cardiac defibrillators (First Revision)

Cardiac Defibrillators

1090000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	10000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	45000	-
201.6(Classification Of ME equipment and ME systems)	-	7500	-
201.7(ME EQUIPMENT identification, marking and documents)	-	2500	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	75000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	75000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	75000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	75000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	20000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	75000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	7500	-
201.15(Construction of ME EQUIPMENT)	-	90000	-
201.16(ME SYSTEMS)	-	7500	-
201.17(Electromagnetic compatibility of ME equipment and ME systems)	-	300000	Facility for EMI/EMC available under 1668 (DIV-II) Location
202(Electromagnetic compatibility-Requirement and tests)	-	300000	Facility for EMI/EMC available under 1668 (DIV-II) Location

19 Mar, 2029

-
Included w.e.f. 18.08.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number