BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14051 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4051

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 779 (1994)

Water meters (Domestic Type) - Specification (Sixth Revision)

7500 View breakup
-

Clause No.	Exclusion	Remark
13(Marking)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
4(Nominal Size)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
5(Classes of Water meter)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
Cl-6.1.1 (b)(Elongation)	-	-
Cl-6.1.1 (c)(Water absorption on immersion)	-	-
Cl-6.1.1 (d)(withstanding temperature)	-	-

22 May, 2029

-
-

4052

BIS, Guwahati Branch Laboratory (GBL)

None

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.3 (Treatment)	-
Cl-5.4 (Moisture Content)	-
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-9.5.2 (Water Resistance Test)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (i) a (Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-
Cl-9.9, Table-3 (i) b (Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.4.2 (Adhesion of Plies)	-
Cl-4.1 (Timber)	-
Cl-4.2 (Adhesive)	-
Cl-5.1 (Veneers)	-
Cl-5.2.1 (Glueing)	-
Cl -5.2.2 (Thickness of Veneers)	-
Cl - 5.2.3.1 (Joint in Veneers)	-
Cl - 5.2.3.2 (Edge joints)	-
Cl - 5.2.3.3 (End joints)	-
Cl - 5.2.3.4 (Scarf joints)	-
Cl - 5.2.4 (Grain Direction)	-
5.1.1 (Defects in veneers)	-
Cl-9.12 (Steady-State Formaldehyde Emission Test)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-
Cl-9.6 (Tensile Strength-Across the grain)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (ii) a (Wet Bending Strength- Modulus of Rupture (MOR)-Average)	-
Cl-9.9, Table-3 (ii) b (Wet Bending Strength- Modulus of Rupture (MOR), -Minimum individual)	-
Cl-6.1 (Dimensions (width))	-
Cl-8.3 (Edge Straightness)	-
Cl-11.1 (Marking)	-
Cl-11.3 (Marking)	-

-
Except Steady-State Formaldehyde Emission Test (Optional Test).

4053

BIS, Guwahati Branch Laboratory (GBL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-7.2.4 (Scarf Joints)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-5.1 (Classification by appearance)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-5.2, Table-2 (Maximum Number of Categories of Permissible Defects, per m2)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-11.7 (Steady-State Formaldehyde Emission Test)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-6.1 (Timber)	-
Cl-6.2 (Adhesive)	-
Cl-7.2.3 (Grain Direction)	-
Cl-7.2.5.1 (Gaps in cores and cross-bands)	-
Cl-7.2.5.2 (Splits)	-
Cl-7.2.5.3 (Overlap)	-
Cl. 4 (Grades)	-
Cl.5.1 (Type based on classification by appearance)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl.8.1 (Dimensions -width)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl-13 (Marking)	-

-
Except Steady-State Formaldehyde Emission Test (Optional Test).

4054

Accurate Universal Laboratoies Private Limited, Ahmedabad

7174006

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-

20 Sep, 2026

-
Included w.e.f.23.06.2025 Exclusion Cl-4.2.1 (Ingredients) Cl-4.2.3 (Material)

4055

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

45100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	0	Physical Testing: 22000 Chemical Testing:23100 Total:45100
Cl-5.3(Material)	-	0	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	400	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	200	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	200	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	200	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	600	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	200	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	400	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	200	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	200	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	600	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	200	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	400	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	400	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	600	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	200	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	600	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	2000	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	400	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	200	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	200	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	0	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	200	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	200	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	0	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	400	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	400	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	400	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	400	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	0	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	0	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	600	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	600	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	200	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	0	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	400	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	0	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	400	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	400	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	200	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	200	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	200	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	200	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	200	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	400	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	400	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	400	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	200	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	400	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	500	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	400	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	400	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	200	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	200	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	200	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	2100	-
Cl-8.1(Marking)	-	0	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	0	FOR CHEMICAL 23100
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-
Cl-5.1(Shape and Design)	-	0	-
Cl-5.3(Material)	-	0	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	0	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	0	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	0	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	0	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	0	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	0	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	0	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	0	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	0	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	0	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	0	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	0	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	0	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	0	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	0	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	0	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	0	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	0	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	0	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	0	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	0	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	0	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	0	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	0	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	0	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	0	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	0	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	0	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	0	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	0	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	0	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	0	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	0	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	0	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	0	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	0	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	0	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	0	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	0	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	0	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	0	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	0	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	0	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	0	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	0	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	0	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	0	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	0	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-

02 May, 2027

-
Included w.e.f 13.05.2025

4056

Intertek India Private Limited, New Delhi (E-26)

8136626

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	15% discount offered to samples received from BIS.
7.0(Marking and instructions)	-	1000	15% discount offered to samples received from BIS.
8.0(Protection against access to live part test)	-	2000	15% discount offered to samples received from BIS.
9.0(Starting of motor-operated appliances test)	-	0	This Clause is not Applicable.
10.0(Power Input and current test)	-	1000	15% discount offered to samples received from BIS.
11.0(Heating test)	-	3000	15% discount offered to samples received from BIS.
13.0(Leakage current and electric strength test)	-	4000	15% discount offered to samples received from BIS.
14.0(Transient voltages)	-	4000	15% discount offered to samples received from BIS.
15.0(Moisture Resistance)	-	3000	15% discount offered to samples received from BIS.
16.0(Leakage current and electric strength test)	-	5000	15% discount offered to samples received from BIS.
17.0(Overload protection of transformers test)	-	2000	15% discount offered to samples received from BIS.
18.0(Endurance test)	-	0	This Clause is not Applicable.
19.0(Abnormal Operations)	-	2000	15% discount offered to samples received from BIS.
20.0(Stability and Mechanical Hazards)	-	3000	15% discount offered to samples received from BIS.
21.0(Mechanical Strength)	-	2000	15% discount offered to samples received from BIS.
22.0(Construction verification related tests)	-	2000	15% discount offered to samples received from BIS.
23.0(Internal wiring)	-	2000	15% discount offered to samples received from BIS.
24.0(Components)	-	2000	15% discount offered to samples received from BIS.
25.0(Supply connections and External Flexible Cords)	-	1000	15% discount offered to samples received from BIS.
26.0(Terminal for External Conductors)	-	1000	15% discount offered to samples received from BIS.
27.0(Provision for Earthing)	-	1000	15% discount offered to samples received from BIS.
28.0(Screws and connections)	-	1000	15% discount offered to samples received from BIS.
29.0(Clearances and Creepage distances and solid insulation)	-	1000	15% discount offered to samples received from BIS.
30.0(Resistance to heat and fire)	-	3000	15% discount offered to samples received from BIS.
31.0(Resistance to rusting)	-	2000	15% discount offered to samples received from BIS.
4(General Requirements)	-	500	15% discount offered to samples received from BIS.
5(General condition for the tests)	-	500	15% discount offered to samples received from BIS.
6.0(Classification)	-	0	Repeated clause
7.0(Marking and instructions)	-	0	Repeated clause
8.0(Protection against access to live part test)	-	0	Repeated clause
9.0(Starting of motor-operated appliances test)	-	0	This clause is not applicable.
10.0(Power Input and current test)	-	0	Repeated clause
11.0(Heating test)	-	0	Repeated clause
13.0(Leakage current and electric strength test)	-	0	Repeated clause
14.0(Transient voltages)	-	0	Repeated clause
15.0(Moisture Resistance)	-	0	Repeated clause
16.0(Leakage current and electric strength test)	-	0	Repeated clause
17.0(Overload protection of transformers test)	-	0	Repeated clause
18.0(Endurance test)	-	0	This clause is not applicable.
19.0(Abnormal Operations)	-	0	Repeated clause
20.0(Stability and Mechanical Hazards)	-	0	Repeated clause
21.0(Mechanical Strength)	-	0	Repeated clause
22.0(Construction verification related tests)	-	0	Repeated clause
23.0(Internal wiring)	-	0	Repeated clause
24.0(Components)	-	0	Repeated clause
25.0(Supply connections and External Flexible Cords)	-	0	Repeated clause
26.0(Terminal for External Conductors)	-	0	Repeated clause
27.0(Provision for Earthing)	-	0	Repeated clause
28.0(Screws and connections)	-	0	Repeated clause
29.0(Clearances and Creepage distances and solid insulation)	-	0	Repeated clause
30.0(Resistance to heat and fire)	-	0	Repeated clause
31.0(Resistance to rusting)	-	0	Repeated clause
4(General Requirements)	-	0	Repeated clause
5(General condition for the tests)	-	0	Repeated clause

27 Apr, 2029

-
Included w.e.f.09.04.2025 Exclusion Cl 32.0 (Radiation, Toxicity and Similar hazards) Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

4057

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	10000	-
Cl 7(Dimensions Of Pipes)	-	10000	-
Cl 8(Visual Appearance)	-	10000	-
Cl 9.1(Hydraulic Characteristics)	-	10000	-
Cl 9.2(Fusion Compatibility)	-	10000	-
Cl 9.3(Reversion Test )	-	10000	-
Cl 9.4 & Annex B(Impact Strength)	-	10000	-
Cl 9.5(Density)	-	10000	-
Cl 9.6(Melt Flow Rate)	-	10000	-
Cl 9.7(Carbon Black Content & Dispersion)	-	10000	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	10000	-
Cl 9.9(Opacity)	-	10000	-
5(Colour)	-	10000	-

08 May, 2028

-
-

4058

ATCC TEST LABS LLP

8172626

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(By inspection)	-	200	-
5.1(By inspection)	-	0	-
5.2(By inspection)	-	0	-
6.1(By inspection)	-	300	-
6.2(By inspection)	-	0	-
6.3(By inspection)	-	0	-
6.4(By inspection)	-	0	-
6.4.3(By inspection)	-	0	-
6.5(By inspection)	-	0	-
6.5.1(IEC 60529 and by inspection)	-	0	-
6.5.2(IEC 60529 and by inspection)	-	500	-
6.5.3(Annexure N and by inspection)	-	500	-
6.6(By inspection)	-	0	-
6.7.1(By inspection)	-	0	-
6.7.2(By inspection)	-	0	-
6.8(By inspection)	-	0	-
6.8.2(By inspection)	-	0	-
6.9(Annexure H and by inspection)	-	500	-
6.1(By inspection)	-	0	-
6.11(By inspection)	-	0	-
6.12(By inspection)	-	0	-
6.13(By inspection)	-	0	-
6.14(By inspection)	-	0	-
6.15(Annexure J and by inspection)	-	0	-
6.16(By inspection)	-	0	-
6.17(Annexure H)	-	200	-
6.18(Annexure H)	-	300	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	500	-
9(By inspection)	-	0	-
9.1.1(By inspection)	-	0	-
9.1.2(By inspection)	-	0	-
9.1.3(By inspection)	-	0	-
9.2(By inspection)	-	0	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	500	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.4(by inspection and by plating)	-	200	-
9.4.1(by inspection)	-	0	-
9.4.2(by inspection)	-	0	-
9.5.1(by inspection)	-	0	-
9.5.2(by inspection)	-	0	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	500	-
10.1.2(By inspection )	-	0	-
10.1.3(By inspection )	-	0	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	0	-
10.1.5(By measurement)	-	300	-
10.1.5.1(by inspection, by measurement, by torque test)	-	0	-
10.1.6(by inspection after cl 10.1.5)	-	0	-
10.1.7(by inspection)	-	0	-
10.1.7.1(by inspection)	-	0	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	300	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	300	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	500	-
10.1.11(By inspection)	-	0	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	200	-
10.1.13(By inspection and after the test of cl 17)	-	0	-
10.1.14(By inspection)	-	0	-
10.1.15(Figure 11 or 12)	-	300	-
10.2(By inspection)	-	0	-
10.2.1(Table 10.2.1)	-	200	-
10.2.2(By inspection)	-	0	-
10.2.3(By inspection)	-	0	-
10.2.4.1(Figure 14 or 15)	-	300	-
10.2.4.2(During the test of cl 14)	-	0	-
10.2.4.3(As per table 10.2.4.3)	-	0	-
10.2.4.4(As per Figure 16)	-	0	-
11.1(By inspection)	-	0	-
11.1.1(By inspection)	-	0	-
11.1.2(by inspection and by analysis of the material)	-	0	-
11.1.3(by inspection)	-	0	-
11.2(by inspection and by test)	-	0	-
11.2.2(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	200	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	300	-
11.2.5(As per annexure H, cl 11.2.5)	-	0	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	0	-
11.3.2(by inspection and by the tests of clauses 13)	-	0	-
11.3.3(by inspection)	-	0	-
11.3.4(by inspection)	-	0	-
11.3.5(by inspection)	-	0	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	0	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	300	-
11.3.8(by inspection)	-	0	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	200	-
11.4.1 (by inspection)	-	0	-
11.4.2(by inspection)	-	0	-
11.4.3(by the tests of clauses 15 to 17)	-	500	-
11.4.4 to 11.4.16(As per relevent type)	-	0	-
11.5(by inspection)	-	0	-
11.6.1(by inspection and by manual test)	-	0	-
11.6.2(by inspection and by manual test)	-	0	-
11.6.3.1(By inspection)	-	0	-
11.6.3.2(By inspection)	-	0	-
11.6.3.3(By inspection)	-	200	-
11.6.3.4(By inspection)	-	0	-
11.6.3.5(By inspection)	-	0	-
11.6.3.6(By inspection)	-	0	-
11.6.3.7(By inspection)	-	0	-
11.7.1(By Flexing test as per fig 9)	-	300	-
11.7.1.2.2(By Flexing test as per fig 9)	-	500	-
11.7.1.2.3(By Flexing test as per fig 9)	-	0	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	500	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	0	-
11.7.2.11 to 11.7.2.15(By measurement)	-	0	-
11.8(By inspection)	-	0	-
11.8.1(By inspection)	-	0	-
11.8.2(By inspection and as per table 11.8.2)	-	500	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	500	-
11.9.1(By inspection)	-	0	-
11.9.1.1(by inspection and manual test)	-	0	-
11.9.1.2(by inspection and manual test)	-	0	-
11.9.1.3(by inspection and manual test)	-	0	-
11.9.1.4(by inspection and manual test)	-	0	-
11.10.1(by inspection)	-	0	-
11.10.2(by inspection)	-	0	-
11.10.3(by inspection and by test of socket-outlet system)	-	0	-
11.11(Requirements during mounting, maintenance and servicing)	-	1000	-
11.11.1(By inspection)	-	0	-
11.11.1.1(By inspection)	-	0	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	500	-
11.11.1.5.4(By inspection)	-	0	-
11.11.1.5.6(by pull test)	-	500	-
11.11.2(By inspection)	-	0	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.4(By inspection)	-	0	-
11.11.5(By inspection and by manual test)	-	0	-
11.11.6(By inspection)	-	0	-
11.11.7(By inspection)	-	0	-
11.12(As per H, cl 11.12)	-	500	-
12.1(As per IEC 60529)	-	500	-
12.1.6.2(Torque test)	-	500	-
11.11.1.2(By inspection)	-	0	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	500	-
13.1(as per table 13.1)	-	500	-
13.2(As per table 13.2)	-	500	-
12.3(as per cl 12.3.1 to 12.3.7)	-	500	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	500	-
14.1(As per table 14.1)	-	500	-
14.3(As per table 14.1)	-	500	-
15(as per cl 15.1 to 15.4)	-	500	-
15.5(as per cl 15.5 to 15.6)	-	500	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	500	-
15.7(as per annexure J, cl 15.7)	-	500	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	500	-
16.2.4(test of cl 15 repeated )	-	500	-
16.2.4(42 of table 7.2)	-	500	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	500	-
17.6(as per cl 17.6.1 and 17.6.2)	-	500	-
17.7(as per cl 17.7.1 to 17.7.7)	-	500	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	500	-
17.9(as per cl 17.9.1 to 17.9.4)	-	500	-
17.1(as per cl 17.10.1 to 17.10.4)	-	500	-
17.11(as per cl 17.11.1 to 17.11.4)	-	500	-
17.12(as per cl 17.12.1 to 17.12.5)	-	500	-
17.13(as per cl 17.13.1 to 17.13.4)	-	500	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	500	-
H.17.14(as per cl H 17.4.16)	-	500	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	500	-
J 17.18.5(as per cl J 17.8.5)	-	500	-
J 17.18.5(as per cl J 17.8.6)	-	500	-
J 17.17.2(as per table 13.1)	-	500	-
J 17.17(As per table 13.2)	-	500	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	500	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	500	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	500	-
18.1.6(By inspection)	-	500	-
18.1.6.1(By inspection)	-	0	-
18.1.6.2(By inspection)	-	0	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	500	-
18.2(Impact tester)	-	500	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	500	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	500	-
18.7(Pull test as per table 18.7)	-	500	-
18.8(as per cl 18.8.2 and 18.8.3)	-	500	-
18.9(axial pull of 15N/30N)	-	500	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.2.1(By inspection)	-	0	-
19.2.2(By inspection)	-	0	-
19.2.3(By inspection)	-	0	-
19.2.4(By inspection)	-	0	-
19.2.4.1(By inspection)	-	0	-
19.2.5(By inspection)	-	0	-
19.2.5.1(By inspection)	-	0	-
19.2.6(By inspection)	-	0	-
20.1(as per table 20.2)	-	500	-
20.2.1(as per table 20.3)	-	500	-
20.2.2(as per table 20.4)	-	500	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	500	-
21.2.2 to 21.2.6(as per annexure G)	-	500	-
21.2.7(As per cl G.4)	-	500	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	500	-
24.1(as per IEC 60742)	-	500	-
24.1(as per IEC 60384-14)	-	500	-
24.1(as per IEC 60127 or IEC 60269)	-	500	-
25(as per annexure H)	-	500	-
27.1(as per annexure H)	-	500	-
27.2(as per cl 27.2.1 and 27.2.2)	-	500	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	500	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	500	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	500	-
11.1.102(As per IEC 60216-1:2001)	-	500	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	500	-
11.4.101(as per cl 11.4.101)	-	500	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	500	-
11.4.107(As per annexure DD)	-	500	-
11.6.3.101(As per table 7, item 117)	-	500	-
11.101(As per annexure BB)	-	500	-
12.101(None)	-	500	-
12.101.2(15 K+Tmax for 16 hr)	-	500	-
12.101.5(as per 12.103 to 12.105)	-	500	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	500	-
14.101.1( as per cl 14.102 and 14.102.1)	-	500	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	500	-
15.5.3.109( voltage specified in Table 13.2)	-	500	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	500	-
17.16.107( 250 thermal cycles.)	-	500	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	500	-
17.101.1(as per cl 17.101.1 to 17.105)	-	500	-
18.101(as per cl 18.101.2 and 101.3)	-	500	-
18.102(Hydrualic test)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Information)	-	500	-
8(Protection against Electric Shock)	-	500	-
9(Provision for Protective Earthing)	-	500	-
10(Terminals and terminations)	-	500	-
11(Constructional Requirements)	-	500	-
12(Moisture and Dust Resistance)	-	2500	-
13(Electric Strength and Insulation Resistance)	-	500	-
14(Heating)	-	500	-
15(Manufacturing Deviation and Drift)	-	500	-
16(Environmental Stress)	-	500	-
17(Endurance)	-	4400	-
18(Mechanical Strength)	-	500	-
19(Threaded Parts and Connections)	-	500	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	500	-
21(Fire Hazard Testing)	-	500	-
22(Resistance to Corrosion)	-	500	-
25(Normal Operation)	-	500	-
24(Components)	-	500	-
27(Abnormal Operation)	-	500	-
28(Guidance on the use of Electronic Disconnection)	-	500	-
5(By inspection)	-	500	-
5.1(By inspection)	-	0	-
5.2(By inspection)	-	0	-
6.1(By inspection)	-	500	-
6.2(By inspection)	-	0	-
6.3(By inspection)	-	0	-
6.4(By inspection)	-	0	-
6.4.3(By inspection)	-	0	-
6.5(By inspection)	-	0	-
6.5.1(IEC 60529 and by inspection)	-	0	-
6.5.2(IEC 60529 and by inspection)	-	0	-
6.5.3(Annexure N and by inspection)	-	0	-
6.6(By inspection)	-	0	-
6.7.1(By inspection)	-	0	-
6.7.2(By inspection)	-	0	-
6.8(By inspection)	-	0	-
6.8.2(By inspection)	-	0	-
6.9(Annexure H and by inspection)	-	500	-
6.1(By inspection)	-	0	-
6.11(By inspection)	-	0	-
6.12(By inspection)	-	0	-
6.13(By inspection)	-	0	-
6.14(By inspection)	-	0	-
6.15(Annexure J and by inspection)	-	0	-
6.16(By inspection)	-	0	-
6.17(Annexure H)	-	0	-
6.18(Annexure H)	-	0	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	500	-
9(By inspection)	-	0	-
9.1.1(By inspection)	-	0	-
9.1.2(By inspection)	-	0	-
9.1.3(By inspection)	-	0	-
9.2(By inspection)	-	0	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	0	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.4(by inspection and by plating)	-	0	-
9.4.1(by inspection)	-	0	-
9.4.2(by inspection)	-	0	-
9.5.1(by inspection)	-	0	-
9.5.2(by inspection)	-	0	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.2(By inspection )	-	0	-
10.1.3(By inspection )	-	0	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	0	-
10.1.5(By measurement)	-	0	-
10.1.5.1(by inspection, by measurement, by torque test)	-	0	-
10.1.6(by inspection after cl 10.1.5)	-	0	-
10.1.7(by inspection)	-	0	-
10.1.7.1(by inspection)	-	0	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	0	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	0	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	0	-
10.1.11(By inspection)	-	0	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	0	-
10.1.13(By inspection and after the test of cl 17)	-	0	-
10.1.14(By inspection)	-	0	-
10.1.15(Figure 11 or 12)	-	0	-
10.2(By inspection)	-	0	-
10.2.1(Table 10.2.1)	-	0	-
10.2.2(By inspection)	-	0	-
10.2.3(By inspection)	-	0	-
10.2.4.1(Figure 14 or 15)	-	0	-
10.2.4.2(During the test of cl 14)	-	0	-
10.2.4.3(As per table 10.2.4.3)	-	0	-
10.2.4.4(As per Figure 16)	-	0	-
11.1(By inspection)	-	0	-
11.1.1(By inspection)	-	0	-
11.1.2(by inspection and by analysis of the material)	-	0	-
11.1.3(by inspection)	-	0	-
11.2(by inspection and by test)	-	0	-
11.2.2(by inspection, by measurement and/or by manual test)	-	200	-
11.2.3(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	0	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	500	-
11.2.5(As per annexure H, cl 11.2.5)	-	0	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	0	-
11.3.2(by inspection and by the tests of clauses 13)	-	0	-
11.3.3(by inspection)	-	0	-
11.3.4(by inspection)	-	0	-
11.3.5(by inspection)	-	0	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	0	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	200	-
11.3.8(by inspection)	-	500	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	0	-
11.4.1 (by inspection)	-	0	-
11.4.2(by inspection)	-	0	-
11.4.3(by the tests of clauses 15 to 17)	-	0	-
11.4.4 to 11.4.16(As per relevent type)	-	0	-
11.5(by inspection)	-	0	-
11.6.1(by inspection and by manual test)	-	0	-
11.6.2(by inspection and by manual test)	-	0	-
11.6.3.1(By inspection)	-	0	-
11.6.3.2(By inspection)	-	0	-
11.6.3.3(By inspection)	-	0	-
11.6.3.4(By inspection)	-	0	-
11.6.3.5(By inspection)	-	0	-
11.6.3.6(By inspection)	-	0	-
11.6.3.7(By inspection)	-	0	-
11.7.1(By Flexing test as per fig 9)	-	0	-
11.7.1.2.2(By Flexing test as per fig 9)	-	0	-
11.7.1.2.3(By Flexing test as per fig 9)	-	0	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	500	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	0	-
11.7.2.11 to 11.7.2.15(By measurement)	-	0	-
11.8(By inspection)	-	0	-
11.8.1(By inspection)	-	0	-
11.8.2(By inspection and as per table 11.8.2)	-	0	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	0	-
11.9.1(By inspection)	-	0	-
11.9.1.1(by inspection and manual test)	-	0	-
11.9.1.2(by inspection and manual test)	-	0	-
11.9.1.3(by inspection and manual test)	-	0	-
11.9.1.4(by inspection and manual test)	-	0	-
11.10.1(by inspection)	-	0	-
11.10.2(by inspection)	-	0	-
11.10.3(by inspection and by test of socket-outlet system)	-	0	-
11.11(Requirements during mounting, maintenance and servicing)	-	0	-
11.11.1(By inspection)	-	0	-
11.11.1.1(By inspection)	-	0	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	0	-
11.11.1.5.4(By inspection)	-	0	-
11.11.1.5.6(by pull test)	-	0	-
11.11.2(By inspection)	-	0	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.4(By inspection)	-	0	-
11.11.5(By inspection and by manual test)	-	0	-
11.11.6(By inspection)	-	0	-
11.11.7(By inspection)	-	0	-
11.12(As per H, cl 11.12)	-	0	-
12.1(As per IEC 60529)	-	0	-
12.1.6.2(Torque test)	-	0	-
11.11.1.2(By inspection)	-	0	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	0	-
13.1(as per table 13.1)	-	500	-
13.2(As per table 13.2)	-	0	-
12.3(as per cl 12.3.1 to 12.3.7)	-	0	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	0	-
14.1(As per table 14.1)	-	0	-
14.3(As per table 14.1)	-	500	-
15(as per cl 15.1 to 15.4)	-	0	-
15.5(as per cl 15.5 to 15.6)	-	0	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	0	-
15.7(as per annexure J, cl 15.7)	-	0	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	0	-
16.2.4(test of cl 15 repeated )	-	0	-
16.2.4(42 of table 7.2)	-	500	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	500	-
17.6(as per cl 17.6.1 and 17.6.2)	-	500	-
17.7(as per cl 17.7.1 to 17.7.7)	-	500	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	0	-
17.9(as per cl 17.9.1 to 17.9.4)	-	0	-
17.1(as per cl 17.10.1 to 17.10.4)	-	0	-
17.11(as per cl 17.11.1 to 17.11.4)	-	0	-
17.12(as per cl 17.12.1 to 17.12.5)	-	500	-
17.13(as per cl 17.13.1 to 17.13.4)	-	500	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	500	-
H.17.14(as per cl H 17.4.16)	-	0	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	0	-
J 17.18.5(as per cl J 17.8.5)	-	0	-
J 17.18.5(as per cl J 17.8.6)	-	500	-
J 17.17.2(as per table 13.1)	-	0	-
J 17.17(As per table 13.2)	-	0	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	0	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	0	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	0	-
18.1.6(By inspection)	-	500	-
18.1.6.1(By inspection)	-	500	-
18.1.6.2(By inspection)	-	0	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	0	-
18.2(Impact tester)	-	0	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	1000	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	0	-
18.7(Pull test as per table 18.7)	-	0	-
18.8(as per cl 18.8.2 and 18.8.3)	-	500	-
18.9(axial pull of 15N/30N)	-	500	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	1000	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.2.1(By inspection)	-	0	-
19.2.2(By inspection)	-	0	-
19.2.3(By inspection)	-	0	-
19.2.4(By inspection)	-	0	-
19.2.4.1(By inspection)	-	0	-
19.2.5(By inspection)	-	0	-
19.2.5.1(By inspection)	-	500	-
19.2.6(By inspection)	-	500	-
20.1(as per table 20.2)	-	0	-
20.2.1(as per table 20.3)	-	0	-
20.2.2(as per table 20.4)	-	0	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	500	-
21.2.2 to 21.2.6(as per annexure G)	-	500	-
21.2.7(As per cl G.4)	-	0	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	0	-
24.1(as per IEC 60742)	-	0	-
24.1(as per IEC 60384-14)	-	0	-
24.1(as per IEC 60127 or IEC 60269)	-	500	-
25(as per annexure H)	-	0	-
27.1(as per annexure H)	-	0	-
27.2(as per cl 27.2.1 and 27.2.2)	-	0	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	0	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	0	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	500	-
11.1.102(As per IEC 60216-1:2001)	-	0	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	0	-
11.4.101(as per cl 11.4.101)	-	0	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	0	-
11.4.107(As per annexure DD)	-	500	-
11.6.3.101(As per table 7, item 117)	-	500	-
11.101(As per annexure BB)	-	500	-
12.101(None)	-	500	-
12.101.2(15 K+Tmax for 16 hr)	-	0	-
12.101.5(as per 12.103 to 12.105)	-	0	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	0	-
14.101.1( as per cl 14.102 and 14.102.1)	-	500	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	500	-
15.5.3.109( voltage specified in Table 13.2)	-	0	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	0	-
17.16.107( 250 thermal cycles.)	-	0	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	0	-
17.101.1(as per cl 17.101.1 to 17.105)	-	0	-
18.101(as per cl 18.101.2 and 101.3)	-	0	-
18.102(Hydrualic test)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Information)	-	500	-
8(Protection against Electric Shock)	-	500	-
9(Provision for Protective Earthing)	-	500	-
10(Terminals and terminations)	-	2000	-
11(Constructional Requirements)	-	2000	-
12(Moisture and Dust Resistance)	-	1000	-
13(Electric Strength and Insulation Resistance)	-	1000	-
14(Heating)	-	1000	-
15(Manufacturing Deviation and Drift)	-	1000	-
16(Environmental Stress)	-	1000	-
17(Endurance)	-	5000	-
18(Mechanical Strength)	-	1000	-
19(Threaded Parts and Connections)	-	1000	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	1000	-
21(Fire Hazard Testing)	-	1000	-
22(Resistance to Corrosion)	-	1000	-
25(Normal Operation)	-	1000	-
24(Components)	-	1000	-
27(Abnormal Operation)	-	500	-
28(Guidance on the use of Electronic Disconnection)	-	2000	-

15 Jun, 2026

-
Included w.e.f.16.07.2025

4059

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 15 (2024)

Vitreous China Sanitary Appliances âSpecification Part 15 Specific Requirements of Universal Water Closets (Third Revision)

Size 1, Size 2 and any other sizes

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(GENERAL REQUIREMENTS)	-	3000	-
Cl-4(SIZES)	-	200	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	3000	-
Cl-6(CONSTRUCTION)	-	500	-
Cl-7(FINISH)	-	200	-
Cl-6.3(Two-Piece Bend)	-	500	-
Cl-8.1(Universal water)	-	1400	-
Cl-8.2(Toilet Paper Test)	-	200	-
Cl-8.3(Smudge Test)	-	200	-
Cl-8.4(Holding Capacity Test)	-	200	-
Cl-8.5.1(Single Ball Test)	-	200	-
Cl-8.5.2(Fifty Ball Test)	-	200	-
Cl-8.6(Fifty Ball Test)	-	200	-
Cl-8.7(Splash Test)	-	200	-
Cl-9(LOAD BEARING TEST)	-	1000	-
Cl-11("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	3000	-

07 Feb, 2027

-
Included w.e.f.03.04.2025

4060

QA TESTING LABORATORIES PRIVATE LIMITED LUCKNOW

9192006

IS 1077 (1992)

Common burnt clay building bricks - Specification (Fifth Revision)

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Compressive strength)	-	500	OK
6.1(Dimensions)	-	500	-
7.3(Efflorescence)	-	500	-
7.2(Water Absorption)	-	500	-
4.1(Common burnt clay bricks)	-	200	-
6.2(Tolerances)	-	200	-
5(General Quality)	-	200	-
9(Marking)	-	200	-

03 Dec, 2028

-
-

4061

QA TESTING LABORATORIES PRIVATE LIMITED LUCKNOW

9192006

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	200	-
Clause 7.3, Annex G(Average Breaking Load)	-	200	-
Clause 7.3, Annex G(Individual Breaking Load)	-	200	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	200	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	200	-
Clause 7.1.3 (Colour and Texture)	-	100	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	200	-
Clause 7.1.1 (General Quality)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	200	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	200	-

03 Dec, 2028

-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi) (Freeze Thaw durability, Clause 6.3 (Bonding and Delamination between the layers of paver blocks), Clause 3.20 (Spacer nibs), 10 (Marking), 5.2 (Mineral Admixture), 5.3 (Chemical Admixtures), 5.4 (Coarse and Fine Aggregates), 5.5 (Pigments), 5.6 (Water), cl.5 (Cement)

4062

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 2266 (2024)

STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSE - SPECIFICATION (Sixth Revision)

19900 View breakup
-

Clause No.	Exclusion	Remark
Cl-5(Minimum breaking force)	-	-
Cl-6(Wire rope)	-	-
Cl-7(Construction)	-	-
Cl-8.1(Fibre Core)	-	-
Cl-8.2(Steel Core)	-	-
Cl-9(Joints)	-	-
Cl-10(Galvanizing)	-	-
Cl-12(Marking)	-	-
Cl-4(Rope size and Tolerance)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6(Wire rope)	-	-
Cl-7(Construction)	-	-
Cl-8.1(Fibre Core)	-	-
Cl-8.2(Steel Core)	-	-
Cl-9(Joints)	-	-
Cl-10(Galvanizing)	-	-
Cl-12(Marking)	-	-
Cl-4(Rope size and Tolerance)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6(Wire rope)	-	-
Cl-7(Construction)	-	-
Cl-8.1(Fibre Core)	-	-
Cl-8.2(Steel Core)	-	-
Cl-9(Joints)	-	-
Cl-10(Galvanizing)	-	-
Cl-12(Marking)	-	-
Cl-4(Rope size and Tolerance)	-	-

25 Feb, 2027

-
Included w.e.f 09.04.2025

4063

BISS LABS -DIVISION OF ITW INDIA PRIVATE LIMITED. BENGALURU

6175936

IS 2403 (2024)

Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets (Fourth Revision)

479434 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.3(Preloading)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.4(Length validation)	-	51250	-
Cl-3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-

10 Jan, 2027

-
Included w.e.f.03.06.2025 Exclusion Cl-5.6 (Sprocket rim profiles) Cl-5.9 (Pitch accuracy of sprocket teeth) Cl-5.11 (Bore tolerance)

4064

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 4521 (2024)

Wire Ropes Used in Oil Wells and Oil Well Drilling and Other Applications of Petroleum and Natural Gas Industries - Specification (Third Revision)

19900 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(Size, Construction, Core and Grades)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6.1(Wire for guy strands)	-	-
Cl-6.2(Core)	-	-
Cl-6.3(Joints)	-	-
Cl-6.4(Mass)	-	-
Cl-6.5(Lay of the Rope)	-	-
Cl-6.6(Length of Lay)	-	-
Cl-7(Galvanizing)	-	-
Cl-8(Lubrication)	-	-
Cl-9(Rope grades)	-	-
Cl-10(wire tensile strength grade)	-	-
Cl-11(Tolerance in rope diameter)	-	-
Cl-12(Marking)	-	-
Cl-4(Size, Construction, Core and Grades)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6.1(Wire for guy strands)	-	-
Cl-6.2(Core)	-	-
Cl-6.3(Joints)	-	-
Cl-6.4(Mass)	-	-
Cl-6.5(Lay of the Rope)	-	-
Cl-6.6(Length of Lay)	-	-
Cl-7(Galvanizing)	-	-
Cl-8(Lubrication)	-	-
Cl-9(Rope grades)	-	-
Cl-10(wire tensile strength grade)	-	-
Cl-11(Tolerance in rope diameter)	-	-
Cl-12(Marking)	-	-
Cl-4(Size, Construction, Core and Grades)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6.1(Wire for guy strands)	-	-
Cl-6.2(Core)	-	-
Cl-6.3(Joints)	-	-
Cl-6.4(Mass)	-	-
Cl-6.5(Lay of the Rope)	-	-
Cl-6.6(Length of Lay)	-	-
Cl-7(Galvanizing)	-	-
Cl-8(Lubrication)	-	-
Cl-9(Rope grades)	-	-
Cl-10(wire tensile strength grade)	-	-
Cl-11(Tolerance in rope diameter)	-	-
Cl-12(Marking)	-	-

25 Feb, 2027

-
Included w.e.f 09.04.2025

4065

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17786 (2022)

Medical Textiles Underpad Specification

6850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5, Table 1(Type and Sizes)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(pH Value)	-	250	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	500	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	500	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	3600	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	500	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-
Clause 5, Table 1(Type and Sizes)	-	0	-
Clause 6(WORKMANSHIP AND FINISH)	-	0	-
Clause 8.1(pH Value)	-	0	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	0	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	0	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	0	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	0	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	0	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-

20 Feb, 2028

-
-

4066

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	500	-
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	200	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	300	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	200	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	500	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	500	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	500	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	500	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	250	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	3600	-
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	500	-
9(MARKING)	-	500	-
5(WORKMANSHIP AND FINISH)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	-
9(MARKING)	-	0	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	500	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	-

20 Feb, 2028

-
-

4067

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	500	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	3600	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	500	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	500	-
6(Packing)	-	500	-
7(Marking)	-	500	-
5(Requirements)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	-
5.2- Table 1- ii)(Tensile strength)	-	0	-
5.2- Table 1- iii)(Bursting strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-
5.1(Workmanship and finish)	-	0	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	0	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	0	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-
5(Requirements)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	-
5.2- Table 1- ii)(Tensile strength)	-	0	-
5.2- Table 1- iii)(Bursting strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-

20 Feb, 2028

-
-

4068

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Material)	-	500	-
Cl 5.2(Cleaning and Disinfecting)	-	2000	-
Cl 5.3(Practical Performance Test)	-	2000	-
5.4.1.a(Total Inward Leakage (TC-5 Samples) )	-	2000	-
5.4.1.b(Total Inward Leakage (TC -5 Samples))	-	2000	-
5.4.1.a(Total Inward Leakage (AR-5 Samples) )	-	2000	-
5.4.1.b(Total lnward Leakage (AR- 5 Samples) )	-	2000	-
5.4.2(Penetration of Filter Material (MS-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (SW-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (TC-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (AR-3 Samples) )	-	3000	-
Cl 5.5(Compatibility with Skin)	-	500	-
Cl 5.6(Flammability)	-	4000	Flammability (As received condition) - Rs 2000 Flammability (Temperature condition) - Rs 2000
Cl 5.7(Carbon Dioxide Content of the Inhalation Air)	-	5000	-
Cl 5.8(Head Harness)	-	500	-
Cl 5.9(Field of Vision)	-	1500	-
Cl 5.10(Inhalation and Exhalation Valves)	-	8000	Inhalation & exhalation valves - Rs 3000 Exhalation valve Flow i)As received) - Rs 1000 ii)Temp conditioning - Rs 1000 Exhalation valve Tensile force i)As Received - Rs 1000 ii)Temp conditioning - Rs 1000 iii)Simulated wearing -Rs 1000
Cl 5.11(Breathing Resistance)	-	9000	As received - Rs 3000 Temp Conditioning -Rs 3000 Simulated Wearing - Rs 3000
Cl 5.12(Clogging (Coal & Dolomite))	-	6000	-
Cl 5.13(De-mountable Parts)	-	500	-
6.1(Packing)	-	500	-
6.2.1(Marking)	-	500	-
6.2.2(Marking)	-	500	-
7.0(Instructions for Use)	-	1000	-

20 Feb, 2028

-
-

4069

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	4500	GST 18% Excluding.
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-	0	-

20 Feb, 2028

-
-

4070

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 16289 (2014)

Medical textiles - Surgical face masks - Specification

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Materials and Construction)	-	500	-
4.1.2(Design)	-	500	-
4.2 Table 1 i)(Bacterial Filtration Efficiency)	-	8000	-
4.2 Table 1 ii)(Differential Pressure)	-	2500	-
4.2 Table 1 iii)(Splash Resistance)	-	6000	-
4.2 Table 1 iv)(Sub-micron particulate filtration efficiency at 0.1 µ)	-	10000	-

20 Feb, 2028

-
-

4071

Amit Test and Calibration Centre (8172006)

8172006

IS 7098 : Part 3 (1993)

Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV

395000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	500	-
5(INSULATION)	-	500	-
6(SCREENING)	-	500	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	500	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	500	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	500	-
8.1(INNER SHEATH)	-	500	-
8.2(INNER SHEATH)	-	500	-
8.3(INNER SHEATH)	-	500	-
9.1(ARMOUR)	-	500	-
9.2(ARMOUR)	-	500	-
10.1(OUTER SHEATH)	-	500	-
10.2(OUTER SHEATH)	-	500	-
11.1(CONDUCTOR)	-	500	-
11.2(CONDUCTOR)	-	500	-
12.1(CONDUCTOR SCREENING )	-	500	-
12.2(CONDUCTOR SCREENING )	-	500	-
13.1(INSULATION)	-	500	-
13.2(INSULATION)	-	500	-
14.1(INSULATION SCREENING)	-	500	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	500	-
15.1(MOISTURE BARRIER)	-	500	-
15.2.1(Metallic Sheath)	-	500	-
15.2.2(Metallic Sheath)	-	500	-
16.1(INNER SHEATH)	-	500	-
16.2(INNER SHEATH)	-	500	-
17.1(ARMOUR)	-	500	-
17.2(ARMOUR)	-	500	-
17.3(ARMOUR)	-	500	-
17.4(ARMOUR)	-	500	-
17.5(ARMOUR)	-	500	-
18.1(OUTER SHEATH)	-	500	-
18.2(outer sheath colour)	-	500	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	11000	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	8000	-
19.1 b) IV)(Hot set test)	-	5000	-
19.1 b) V)(Shrinkage test)	-	3000	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3000	-
20.6(Tests for armouring material : Dimensions)	-	3000	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	2000	-
Table 9, (Measurement of thickness)	-	1000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5000	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2000	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3000	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	30000	-
20.9.1(Thermal ageing on complete cable sample)	-	11500	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	2500	-
20.2(Resistivity test for semi-conducting layer)	-	7000	-
20.11.1(Bending test followed by P D test)	-	65000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	17000	-
20.13(Dielectric power factor measurement at elevated temperature)	-	17000	-
20.14.1(Load cycle test followed by P.D measurement)	-	70000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	60000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	3500	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	3500	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	3500	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3500	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	23000	-
20.18(Measurement of Capacitance)	-	23000	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	500	-
4.1(CONDUCTOR)	-	500	-
5(INSULATION)	-	500	-
6(SCREENING)	-	500	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	500	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	500	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	500	-
8.1(INNER SHEATH)	-	500	-
8.2(INNER SHEATH)	-	500	-
8.3(INNER SHEATH)	-	500	-
9.1(ARMOUR)	-	500	-
9.2(ARMOUR)	-	500	-
10.1(OUTER SHEATH)	-	500	-
10.2(OUTER SHEATH)	-	500	-
11.1(CONDUCTOR)	-	500	-
11.2(CONDUCTOR)	-	500	-
12.1(CONDUCTOR SCREENING )	-	500	-
12.2(CONDUCTOR SCREENING )	-	500	-
13.1(INSULATION)	-	500	-
13.2(INSULATION)	-	500	-
14.1(INSULATION SCREENING)	-	500	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	500	-
15.1(MOISTURE BARRIER)	-	500	-
15.2.1(Metallic Sheath)	-	500	-
15.2.2(Metallic Sheath)	-	500	-
16.1(INNER SHEATH)	-	500	-
16.2(INNER SHEATH)	-	500	-
17.1(ARMOUR)	-	500	-
17.2(ARMOUR)	-	500	-
17.3(ARMOUR)	-	500	-
17.4(ARMOUR)	-	500	-
17.5(ARMOUR)	-	500	-
18.1(OUTER SHEATH)	-	500	-
18.2(outer sheath colour)	-	500	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	11000	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	8000	-
19.1 b) IV)(Hot set test)	-	5000	-
19.1 b) V)(Shrinkage test)	-	3000	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3000	-
20.6(Tests for armouring material : Dimensions)	-	2000	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	1000	-
Table 9, (Measurement of thickness)	-	2000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5000	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2000	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3000	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	30000	-
20.9.1(Thermal ageing on complete cable sample)	-	11500	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	2500	-
20.2(Resistivity test for semi-conducting layer)	-	7000	-
20.11.1(Bending test followed by P D test)	-	65000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	17000	-
20.13(Dielectric power factor measurement at elevated temperature)	-	17000	-
20.14.1(Load cycle test followed by P.D measurement)	-	70000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	60000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	3500	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	3500	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	3500	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3500	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	23000	-
20.18(Measurement of Capacitance)	-	23000	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	500	-

16 Apr, 2026

-
Included w.e.f 04.07.2025 Exclusion: Above 66 kv for the following clauses, Testing Facility for Cl.20.17 (High Voltage Test ( as Routine and Acceptance Tests ) ), Cl. 20.18 (Measurement of Capacitance), Cl. 20.15 (Impulse Voltage Test Followed by High Voltage Test), Cl. 20.14.1 (Load cycle test followed by P.D measurement), Cl. 20.13 (Dielectric power factor measurement at elevated temperature), Cl. 20.12, 20.18 (Dielectric power factor and capacitance measurement at ambient temperature), Cl. 20.11.1 (Bending test followed by P D test)

4072

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

260000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	10% discount for BIS
7.1(Charging Procedures For Test Purposes)	-	25000	10% discount for BIS
7.2.1(External Short-Circuit Test)	-	25000	10% discount for BIS
7.2.2(Impact Test)	-	10000	10% discount for BIS
7.2.3(Drop Test)	-	10000	10% discount for BIS
7.2.4(Thermal Abuse Test)	-	20000	10% discount for BIS
7.2.5(Overcharge Test)	-	20000	10% discount for BIS
7.2.6(Forced Discharge Test)	-	25000	10% discount for BIS
7.3.2(Internal short-circuit test)	-	25000	10% discount for BIS
7.3.3(Propagation Test)	-	25000	10% discount for BIS
8(Battery System Safety)	-	60000	10% discount for BIS
9(Information For Safety)	-	5000	10% discount for BIS
10(Marking and Designation)	-	5000	10% discount for BIS
5(General Safety Considerations)	-	-	-
7.1(Charging Procedures For Test Purposes)	-	-	-
7.2.1(External Short-Circuit Test)	-	-	-
7.2.2(Impact Test)	-	-	-
7.2.3(Drop Test)	-	-	-
7.2.4(Thermal Abuse Test)	-	-	-
7.2.5(Overcharge Test)	-	-	-
7.2.6(Forced Discharge Test)	-	-	-
7.3.2(Internal short-circuit test)	-	-	-
7.3.3(Propagation Test)	-	-	-
8(Battery System Safety)	-	-	-
9(Information For Safety)	-	-	-
10(Marking and Designation)	-	-	-

31 Dec, 2026

-
Included w.e.f. 04.04.2025

4073

ATCC TEST LABS LLP

8172626

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	500	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5(Material)	-	500	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	500	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	500	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	500	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5(Material)	-	500	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	500	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5(Material)	-	500	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-

15 Jun, 2026

-
Included w.e.f.13.05.2025

4074

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS/IEC 60529 (2001)

Degrees of protection provided by enclosures (IP Code)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Degrees of protection against access to hazardous parts and against solid foreign objects indicated by the first characteristic numeral)	-	11000	Rs. 11000 per IP Numeral
Cl-5.1(Protection against access to hazardous parts)	-	11000	Rs. 11000 per IP Numeral
Cl-5.2(Protection against solid foreign objects)	-	11000	Rs. 11000 per IP Numeral
Cl-6(Degrees of protectlon against ingress of water indicated 'by the second characteristic numeral)	-	11000	Rs. 11000 per IP Numeral
Cl-7(Degrees of protection against access to hazardous parts indicated by the additional letter)	-	11000	Rs. 11000 per IP Numeral
Cl-8(Supplementary letter)	-	11000	Rs. 11000 per IP Numeral
Cl-10(Marking)	-	11000	Rs. 11000 per IP Numeral

05 Apr, 2027

-
Included w.e.f.09.04.2025

4075

ATCC TEST LABS LLP

8172626

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	1000	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	100	10
8.2(Core identification)	-	100	-
8.3(Identification by other means)	-	100	-
9.1(Assembly (Laying up))	-	100	-
9.2(Assembly (Laying up))	-	100	-
9.3(Direction of lay)	-	100	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	500	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-
4.1(Phase/Street Lighting conductor)	-	500	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	500	-
8.2(Core identification)	-	500	-
8.3(Identification by other means)	-	500	-
9.1(Assembly (Laying up))	-	500	-
9.2(Assembly (Laying up))	-	500	-
9.3(Direction of lay)	-	500	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-
4.1(Phase/Street Lighting conductor)	-	500	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	500	-
8.2(Core identification)	-	500	-
8.3(Identification by other means)	-	500	-
9.1(Assembly (Laying up))	-	500	-
9.2(Assembly (Laying up))	-	500	-
9.3(Direction of lay)	-	500	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-

15 Jun, 2026

-
Included w.e.f.13.05.2025

4076

BIS, Central Laboratory (CL)

None

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

Sample quantity required : 2 piece

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Classification)	-
5 (Construction)	-
14 a) (Protection against electric shock)	-
14 b) (High voltage (electric strength) test)	-
14 c) (Leakage current tests)	-
14 d) (Provision for earthing)	-

-
Testing facility available only parameters for: 1.Protection against electric shock (Clause 8 of IS 302-1) 2.High voltage (electric strength) test (Clause 13.3 of IS 302-1) 3.Leakage current tests (Clause 13.2 of IS 302-1) 4.Provision for earthing (Clause 27.5 of IS 302-1)

4077

BIS, Central Laboratory (CL)

None

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

Please see remarks View breakup
For stranded conductors with 7 strands - Rs 4200 For stranded conductors with 19 strands - 22 hrs Rs 6600 For stranded conductors with 37 strands- 30 hrs Rs 9000 For stranded conductors with 61 strands- 50 hrs Rs 15000

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
11 (Stranding)	-
8 (Freedom from defects)	-
16.10, Table 3 (d.c. Resistance Test on Stranded Conductor)	-

-
Test facility complete up to size 100 sq.mm, Test facility not available above size 100 sq.mm (Ultimate tensile strength test, DC resistance test, Stress-strain test on conductor )

4078

BIS, Central Laboratory (CL)

None

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a (Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-
Cl-9.9, Table-3 (i) b (Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-
Cl-9.4.2 (Adhesion of Plies)	-
5.1.1 (Defects in veneers)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-

-
(Test facility not available in CL)- Cl 9.8 Static Bending Strength Above 15 mm thickness, Cl 9.9 Wet Bending Strength Above 15 mm thickness, Steady State Formaldehyde Emission Test (Cl. 9.12) Sample Qty required for testing: 1 Full Sheet

4079

Indian Institute of Packaging (IIP), Mumbai

7118404

IS 17427 (2020)

Wooden ( Timber ) Pallets for Packaging, Storage and Transportation ” Specification

20400 View breakup
-

Clause No.	Exclusion	Remark
4.1(CLASSIFICATION OF PALLETS)	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Cross grains(Grade-1))	-	-
6.1(a)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(b)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(c)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(d)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Checks(Grade-1))	-	-
6.1("Limitation of Timber Defects for Nonexpandable Pallet-Splits and shakes (sizes, location and number)(Grade-1)")	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Warp(Grade-1))	-	-
6.1("Limitation of Timber Defects for Nonexpandable Pallet-Wane (size, location and number)(Grade-1)")	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Decay(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Stain(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Moisture Containt(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Cross grains(Grade-2))	-	-
6.1(a)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(b)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(c)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(d)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.2(Limitation of Timber defects for Expandable pallets)	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Checks(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Splits and shakes (sizes, location and number)(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Warp(Grade-2))	-	-
6.3("Limitation of Timber Defects for Nonexpandable Pallet-Wane (size, location and number)(Grade-2)")	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Decay(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Stain(Grade-2))	-	-
6.3(Limitation of Timber defects for Expandable pallets-Dimensions of components)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Surfacing)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Skip dressing)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Cross cutting)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Deckboard spacing)	-	-
6.3("Limitation of Timber defects for Expandable pallets-Parallelism of deviation deck boards ")	-	-
6.3(Limitation of Timber defects for Expandable pallets-Fastener splits)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Protruding fastener heads and points)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Dimensions of assembled pallet)	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Dimensions of components(Grade 1)")	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 1))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Skip dressing(Grade 1))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Cross cutting(Grade 1))	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Deckboard spacing(Grade 1)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Parallelism of deckboards(Grade 1)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Dimensions of components(Grade 2)")	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Skip dressing(Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Cross cutting(Grade 2))	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Deckboard spacing(Grade 2)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Parallelism of deckboards(Grade 2)")	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
9.1(Number of driven fasteners-Deckbord (width< 130))	-	-
9.1(Number of driven fasteners-Deckbord (width 313 to 175))	-	-
9.1(Number of driven fasteners-Deckbord (width 176 to 200))	-	-
9.1(Number of driven fasteners-Comer block)	-	-
9.1(Number of driven fasteners-Interior block)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.3(Clinching Points of Driven Fasteners)	-	-
9.4(Fasteners-caused Splits)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
10(DIMENSIONS OF PALLETS-Length)	-	-
10(DIMENSIONS OF PALLETS-Width)	-	-
10(DIMENSIONS OF PALLETS-Height)	-	-
10.1(Dimensions of Wings(1200 ×1800 mm pallet))	-	-
10.1(Dimensions of Wings (other size of pallets))	-	-
10.2(Height of the Pallet and Height of Loaded Pallet)	-	-
10.2(Height of the Pallet and Height of Loaded Pallet)	-	-
10.3(Height of Pallet with Cargo Loading)	-	-
10.3(Height of Pallet with Cargo Loading)	-	-
10.1.1(CONSTRUCTION AND DESIGN OF PALLETS-Single-deck Pallet (Recommended for Dunnage))	-	-
10.1.2(CONSTRUCTION AND DESIGN OF PALLETS-Double-deck Pallet)	-	-
10.1.3(CONSTRUCTION AND DESIGN OF PALLETS-Reversible Pallet)	-	-
10.1.4(CONSTRUCTION AND DESIGN OF PALLETS-Non-reversible Pallet)	-	-
10.1.5(CONSTRUCTION AND DESIGN OF PALLETS-Two-way Pallet)	-	-
10.1.6(CONSTRUCTION AND DESIGN OF PALLETS-Four-way Pallet)	-	-
10.1.7(CONSTRUCTION AND DESIGN OF PALLETS-Overlap pallet)	-	-
10.1.8(CONSTRUCTION AND DESIGN OF PALLETS-Wing)	-	-
10.1.9(CONSTRUCTION AND DESIGN OF PALLETS- Notched Stringer Pallet)	-	-
10.1.10("CONSTRUCTION AND DESIGN OF PALLETS-Perimeter-base Pallet ")	-	-
13(1)(Stacking test (Static load)-Stacking)	-	-
13(2)-a(Bending test (Stiffness Flexural strength)-Racking)	-	-
13(2)-b(Bending test (Stiffness Flexural strength)-Racking)	-	-
13(3)(Bottom deck test (Stiffness and Flexural strength of the bottom deck boards between support points)-Racking)	-	-
13(4)(Inclined impact plane test(Shear test)-Distortion resistance)	-	-
13(5)-a(Incline plane test (Leading edge impact test)-Resistance to fork arm)	-	-
13(5)-b(Incline plane test (Leading edge impact test)-Resistance to fork arm)	-	-
13(6)(Incline plane test (Block impact test)-Resistance to fork tip)	-	-
13(7)(Corner drop test-Resistance to Impact)	-	-
13(8)(Compression test-Any activity that compresses blocks or stringers including stacking)	-	-
13(9)(Fork Lifting test-Lifting with forklift and pallet trucks.)	-	-

30 Jun, 2028

-
Included w.e.f 20.06.2025

4080

Unique Test House

9134536

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

UPTO 1000 MM

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(VALVE END CONNECTIONS)	-	200	-
6.0( NOMINAL SIZES )	-	200	-
7.0(NOMINAL PRESSURES)	-	100	-
7.2(Class designations)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	100	-
9.1.1 ( Double Flanged Body Ends)	-	100	-
9.2.2(Wafer Body Ends)	-	100	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	200	-
11.0(Bodies)	-	100	-
12.0(DISC AND SHAFT)	-	200	-
13.0(SEATING AND LININGS)	-	200	-
14.0(BEARINGS)	-	100	-
14.2(BEARINGS)	-	100	-
14.3(BEARINGS)	-	200	-
16.0(OPERATION)	-	100	-
17.1(Performance Testing)	-	100	-
17.2(Body Test)	-	200	-
17.3(Seat Test)	-	100	-
17.4(Disc Strength Test)	-	200	-
Cl. 15 Table 2(Materials)	-	100	-
5.0(SERVICE APPLICATIONS)	-	200	-

07 Sep, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number